507F. Multi-Port Sanitary Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. Pharmaceutical. Bio-Technology.
|
|
- Annis Miles
- 6 years ago
- Views:
Transcription
1 507F Multi- Sanitary Ball Valve Full ISO 5 Mounting Pad For Automated & Manual Service Pharmaceutical Bio-Technology Cosmetic Food & Beverage
2 The 507F Series //5-Way Sanitary Ball Valve The 507F is a true multi-way ball valve with balanced four-seat construction which can reduce the number of process valves required in a piping system. This full port valve is available in a number of flow configurations with both clamp and tube butt weld end connections. Multi-Position ever Handle ISO 5 Mounting Pad Clamp, Tube or Extended Tube Butt Weld Ends Positioning Pin High-Cycle, ive-oaded Stem Packing Multiple Configurations Full Construction Standard Features and Benefits Balanced -Seat or 5-Seat Construction Unlike two-seated diverter valves, the 507F series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position. This true multi-port function can reduce the number of valves required in a process system, and provides engineers greater design flexibility Trunnion Mounted Ball ( / - ) ateral forces in a -way valve can cause unwanted seat distortion. Stem/ball isolation prevents side loading and wear of downstream seats improving performance and service life ISO 5 Mounting Pad High-Cycle, ive-oaded Stem Packing Dynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs Blow-Out-Proof Stem Stem is bottom loaded to prevent removal when valve is in service Full Design Full port construction improves flow characteristics for greater process efficiencies Options - or 5-way construction with multiple flow patterns Clamp, tube butt weld, extended tube butt weld, or compression end connections 507F Pressure / Temperature Chart Pressure (PSI) / Operating Conditions Temperature range (TFM): -0 F ~ 00 F Maximum pressure (TFM): 000 PSI (/ - ), 600 PSI ( - ) Specifications All valves shell and seat tested to ANSI/ASME B6. and API 598 All materials comply with applicable ASTM material specifications (TFM Seats) Temperature ( F) All soft wetted parts comply with FDA CFR Title Part 77
3 /" ~ " T W OG OP (B.C.) A - A View, Valve Components # Part Name Material Qty. Body A5 Gr. CF8M End Cap A5 Gr. CF8M OB OD / M Blind End Cap A5 Gr. CF8M Ball 6SS 5 Stem 6SS 0 6 Seat TFM 5 7 Body Seal PTFE F E H 8 Thrust Washer PEEK 9 Stem Packing Set TFM 0 Packing Gland 0SS Belleville Washer 0SS 0 Gland Nut 0SS Gland Nut ock Washer 0SS Stop Plate 0SS 5 Positioning Pin 0SS A A' 6 Handle 0SS 7 Handle Nut 0SS 8 Handle Cover Vinyl 9 Body Bolt 0SS 6 0* Stem Set Pin 6SS 9 * Trunnion Bearing PTFE * Trunnion Bolt 0SS Part numbers 0 to are for / - size only. * Trunnion 6SS * Trunnion Seal PTFE Dimensions (Inches) Size Clamp BW M H G B D T E F P W ISO 5 Pattern / M6 F05.00 / M6 F M8 F Weight (lbs) / M0 F M0 F0 0.00
4 " ~ " OD S 6 / 0 5 OB W OP (B.C.) A 6A Valve Components # Part Name Material Qty. Body A5 Gr. CF8M End Cap (small) A5 Gr. CF8M A Blind End Cap (large) A5 Gr. CF8M M Ball 6SS Stem 6SS Seat TFM 6 Body Seal (small) PTFE 6A Body Seal (large) PTFE 7 Thrust Washer PEEK F 8 Stem Packing Set TFM 9 8 E H 9 Packing Gland 0SS 0 Belleville Washer 0SS Gland Nut 0SS Gland Nut ock Washer 0SS 7 Stop Plate 0SS 9 Positioning Pin 0SS 5 Handle Drive Coupling 0SS 6 Pipe Handle 0SS 7 Handle Bolt 0SS 8 Stem Bearing PEEK Body Bolt 0SS 0 0 Seat Retainer 6SS Seat Retainer O-Ring Viton 90 Stem Set Pin 6SS Trunnion Bearing PTFE Trunnion Seal PTFE 5 Trunnion 6SS 6 Trunnion Bolt 0SS Size Clamp BW Dimensions (Inches) M H D B S E F P W ISO 5 Pattern Weight (lbs) M0 F M0 F
5 Pattern Options Way - Side, T A & B 0 90 B & C 0 90 C & D 0 90 D & A 80 A & B & C 80 B & C & D 80 C & D & A 80 D & A & B All typically enters from either side of the run Way - Side, A & B Position D Position C typically enters from the branch Way - Bottom, 80 Angle 0 90 A & B 0 90 B & C 80 A & B & C Way - Bottom, 90 Angle 0 90 A & B Position C typically enters from bottom of the valve typically enters from bottom of the valve Way - Bottom, Angle 0 90 A & B 0 90 B & C 80 A & B & C All Way - Side, Double A & B All Position C typically enters from bottom of the valve typically enters from both sides of the run Way - Bottom, A & B 5 Way - Bottom, Angle 0 90 A & B All typically enters from bottom of the valve typically enters from bottom of the valve
6 Direct Mount Products Automation Systems 507F Ordering Information Example: Multi- Ball Valve, Full, 6SS Body and Trim, TFM Seats and PTFE Seals, Clamp Ends, -Way, Side, -, Pattern 0* 507F 0 6 M T C S 0 Valve Series Valve Size Body and Trim Material Seat Seal End Connection Config. Ball Config. Pattern* 507F - Full / / / 6 - A5 Gr. CF8M Body (6) A5 Gr. CF8M Trim (6) M - TFM T - C - Clamp - S - T - PTFE PTFE O - Tube Butt Way Side P - PEEK U - Weld - (PTFE and UHMWPE E - Extended Way B - Carbon Filled B - Tube Butt 5 - Bottom PEEK) U - UHMWPE Buna N E - EPDM (Food Weld P - Compression Ends 5 Way Grade) V - Viton (Food Grade) G - Grafoil M - TFM A - Angle 8-80 Angle 9-90 Angle T - T S - Straight D - Double Adjust in Field Due to continuous product development, information may change without notice. * See Pattern Options. Distributed by: ININE INDUSTRIES, INC. 70-A ittlejohn Street Baldwin Park, CA 9706 Tel: (66) Fax: (66) info@ballvalve.com 00 Inline Industries. All rights reserved. 006.
The 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationDMHP3(4)L(T)2A00 Series
STANDARDS Valve body: ASME B16.34 Material certification: EN10204-3.1 MTR Quality assurance: ISO 9001:2008 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve test: API 598 Direct mount: ISO 5211 End
More informationBall Valves. Ball Valves
Ball Valves Ball Valves -, 0 beon-gil, Seobu-ro, Juchon-myun, Gimhae-si, Gyeongsangnam-do, Korea. TE +--0-0 FAX +---0~ E-mail acevalve@acevalve.co.kr omepage www.acevalve.co.kr Ball Valves Specification
More informationxanik API 6D Trunnion Ball Valves
API 6D Trunnion Ball Valves BV - XANIK SIDE ENTRY TRUNNION BALL VALVES table of contents BALL VALVES INDEX BV - XANIK SIDE ENTRY TRUNION BALL VALVES BV - 3 XANIK BALL VALVE DESIGN FEATURES BV - 4 thru
More informationD M4500 Series 3-Piece Ball Valve
M0 Series iece all Valve TURS & NITS * or food and general chemical service application * Comes standard in stainless steel and carbon steel * Investment cast body and end caps * Self adjusting stem packing
More informationJDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual
JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual 1. Please read this manual before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved and
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationInspired By Challenge. Trunnion mounted ball valves
Inspired y Challenge Trunnion mounted ball valves Trunnion Mounted all Valves Trunnion 81/82 83 91/92 93/94 95/96 Ordering code system Introduction The Habonim trunnion mounted valve series is specially
More informationHigh Pressure Ball Valves
High Pressure all Valves 0,, 0, 0,000 psi (0 bar),000 psi (0 bar) 0,000 psi ( bar) ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 ax: + 00 ITOK, Inc.
More informationPneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
More information3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA
ug type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request Face-to-face:
More information3.1 HP 111 HIGH-PERFORMANCE BUTTERFLY VALVE HP 111 TECHNICAL DATA
HIGH-PERFORMANCE BUTTERFY VAVE HP 111 Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter:
More informationProPress (304 FKM) 1.3
ProPress (304 FKM) 41 ProPress (304 FKM) Viega ProPress for stainless is engineered for harsh industrial environments where the piping systems may come into contact with corrosive cleaning liquids. A complete
More informationGWC Valve International. Proven technology for individual valve solutions worldwide
Proven technology for individual valve solutions worldwide TRUNNION MOUNTED BALL VALVES PRESSURE CLASS: ASME 150-2500 API 2000-5000 SIZE RANGE: 2-4 API STANDARDS: 6D & 6A ASME B16.34 Catalog Number TBV-1001
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationInstructions for Parts Books
Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:
More informationInstallation, Maintenance and Operating Instructions
Trunnion-Design Ball Valves 12 20 (DN 300 500) Series 7150 12 (DN 300) Series 730S 12 20 (DN 300 500) Series 7300 14 24 (DN 350 600) Series 9150 14 24 (DN 350 600) Series 9300 Installation, Maintenance
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
More informationFS-1601C (EN) FORGED STEEL VALVE
FS-0C (EN) ABOUT US FBV Inc. is an ISO 00 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves
More informationStainless Steel Sanitary Products. 3A & BPE Industry Standard Designs Without Brand Name Price. More For Less
Stainless Steel Sanitary Products 3A & BPE Industry Standard Designs Without Brand Name Price More For Less Material Inspection Certification EN 10204 3.1 Positive Material Identification ( PMI ) X-Ray
More informationP303 Pressure Regulator
P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,
More informationPROVEN PERFORMANCE WORLD CLASS PRODUCTS SERIES VF FLOATING BALL VALVES
PROVEN PERFORMANCE WORLD CLASS PRODUCTS SERIES VF FLOATING BALL VALVES Standards and Specifications Vintrol Series VF Flanged End Ball Valves are designed and manufactured to meet the requirements of the
More informationTRUNNION BALL VALVE BA-1401D (EN)
TRUNNION BALL VALVE BA-1 (EN) ABOUT US FBV Inc. is an ISO 1 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves
More informationSeries P0 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1934, 1843 Rev. : C, D Rev. Date : 6/01, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE SPACER, E.P.U PUMP HEAD RETURN LINE (PRESSURE RELIEF) METERING PUMP HOUSING STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT POWER
More informationABOUT US MISSION STATEMENT
PL-0B PLUG VALVE ABOUT US FBV Inc. is an ISO 00 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valve and butterfly
More informationThe Ultimate Innovators
Product Over view america, inc. The Ultimate Innovators www.yamadapump.com Yamada Corporation S ince its beginning in 1905, Yamada has been at the forefront in developing the most complete line of air
More informationConductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
More informationINDEX OF ILLUSTRATIONS
INDEX OF ILLUSTRATIONS FIG 3.1.1 FIG 3.1.2 FIG 3.1.3 FIG 3.2.1 FIG 3.2.2 FIG 3.2.3 FIG 3.2.4 FIG 3.3.1 FIG 3.4.1 FIG 3.4.1.1 ENVELOPE TYPES ENVELOPE NOMENCLATURE OVERVIEW VELCRO RIP & Q-VENT BASKET NOMENCLATURE
More informationFVBSS fixed volume bottle
N FVBSS fixed volume bottle Sampling System The SENSOR Fixed Volume Bottle Sampling System (FVBSS) provides a repeatable fixed volume of sample during each sampling process without stopping flow of the
More informationORTHOBLOC 3000 Drive systems Maintenance
15 en 284 261 282 113 130 120 061 002 264 193 099 001 25 063 65 119 112 133 252 254 1 115 118 04 ORTHOBLOC 3000 Maintenance NOTE LEROY-SOMER reserves the right to modify the characteristics of its products
More informationhard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version
YR Pneumatic actuators for process automation Pneumatic connections configuration: NMUR interface V/VE Top pinion: V/VE Holes for sensor box connection: V/VE ottom holes for connecting valves: SO Single
More informationContents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key
Contents dentification Type key Product data ntroduction Applications Features and benefits Performance range pole pole pole Construction Sectional drawing Construction features Test pressure Operating
More informationMil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
More informationA wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
More informationEdition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions
660072 Edition 3 September 2007 Air Angle Wrench and Nut Runner QA6 and QA8 Series Parts Information Save These Instructions Module Exploded Diagram 7 5 9 7 2 9 50 3 8 3 38 39 8 9 20 2 33 22 23 3 2 3 37
More informationLES. Single-stage end-suction pumps Identification Type key
Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction
More informationStandardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
More informationMelton Series. Owners Manual. Lab Centrifuge. Model # s A C, A C, B C, B C, C C, C C, D C, D C
Melton Series Owners Manual Lab Centrifuge Model # s A-4-115-C, A-4-220-C, B-4-115-C, B-4-220-C, C-4-115-C, C-4-220-C, D-4-115-C, D-4-220-C Serial Numbers 85500 & Above NOTICE Wire this centrifuge according
More information2.3 T214 PTFE-LINED BUTTERFLY VALVE T 214 TECHNICAL DATA
-INED BUTTERFY VAVE T ug type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal diameter: 0 Face-to-face:
More informationDN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationConversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationBettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
More information2.1 T 211-A TECHNICAL DATA
PTFE-INED BUTTERFY VAVE T -A Fully PTFE-lined wafer type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA
More information/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
More informationConfigurations & Parts Identification
Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com
More informationDN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore Materials
More informationSample and Bleed Valves
Pure-Flo Sample and Bleed Valves www.ittpureflo.com Application The Pure-Flo product line of Sample and Bleed Valves provides compact and economical means to extract process samples and bleed off excess
More information5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
More information2.3 T 214-A TECHNICAL DATA
-INED BUTTERFY VAVE T -A ug type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal diameter: 0 Face-to-face:
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA:
TECNICA DATA: ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. Nominal diameter: Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS Series NF E -0.
More informationKM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3
NO. ISSUED: REVISED: 71193 OCT. 2, 2001 JAN. 27, 2003 HOSHIZAKI STACKABLE CRESCENT CUBER MODELS KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 PARTS LIST KM-1600SWH L-0 June, 2001 M-0 Feb., 2002 M-1 Feb.,
More information98 Series Backpressure Regulators and Relief Valves
9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or
More informationRepair Parts List DUEL FUEL RANGE MODEL NUMBER SVD48600BC. When requesting service or ordering parts, always provide the following information:
Repair Parts List DUEL FUEL RANGE MODEL NUMBER SVD48600BC When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description
More informationPR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationRef. Parts No. Parts Name P A B BS A B BS Remarks Gear Case Assy Gear Case (Inside)
GR 480 / GR 530 Quantity GR480 GR530 Ref. Parts No. Parts Name P A B BS A B BS Remarks 80-1020-100-00 Gear Case Assy 1 1 1 1 1 1 1 80-1020-101-00 Gear Case (Inside) 1 1 1 1 1 1 2 80-1020-103-00 Gear Case
More informationDRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationDRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationApplication PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic
pplication Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital FOXBORO/Eckardt positioner Type SRD 992 facililates trouble free expansion to allow for
More informationG-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter
More informationCNG Trunnion Ball valve of class 0 Of BMT Co. Ltd. Make
Mobilität Documents regarding Approval of CNG Trunnion Ball valve of class 0 Of BMT Co. Ltd. Make Approval number: E4-110R-000308-00 Report No: IN110-A0-120035 Dated 16-July-2012 Name of technical service
More informationLOW PROFILE TRANSFERS
LOW PROFILE TRANSFERS PARTS CATALOG 1 INDUSTRIAL DRIVE PO BOX 0 SWIFT CURRENT, SASKATCHEWAN, CANADA SH 0L0 PHONE:.66. (NORTH AMERICA) FAX: 06.. WEBSITE: HTTP://WWW.BATCOMFG.COM EMAIL: SALES@BATCO-REM.COM
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationVALVES & ACCESSORIES 91
VAVES & ACCESSORIES 91 Table of Contents Figure 39101 & 39107 Grooved Butterfl Valves Flow Data Page 93 Figure 39101HV Butterfl Valves 10 Position Handle ever Operated for HVAC Applications Page 94 Figure
More informationWAFER PATTERN BUTTERFLY TYP Z 011-A
TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: 0 ( only PN0/) Face-to-face: EN
More informationSmartLine Radar Level Meter RM70
Page 1 of 5 SmartLine Radar Level Meter Model Selection Guide Reliable measurement in difficult process conditions +/- 3 mm / +/-0.12" standard accuracy Operates up to a flange temperature of 200 0 C /
More informationVDN2.. VEN2.. VUN2.. Radiator valves. Building Technologies HVAC Products ACVATIX TM. NF norm, for 2-pipe heating systems
06 EN - Straight valves VDN.. Angle valves VEN.. Reverse angle valves VUN.. ACVATIX TM Radiator valves NF norm, for -pipe heating systems VDN.. VEN.. VUN.. Valve bodies made of brass, mat nickel-plated
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 25 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationValve Selection Guide
Valve Selection Guide Series Inlet Sizes Available Metals Min. Temp F ( C) 0 / to - -( ) 0 ( ) Yes 00 (.) Air/Gas / Steam / Liquid ASME VIII, CE, CRN / to /Bronze - -( ) ( ) Yes 0 (.) Air/Gas / Steam /
More informationInnovation in. Motionless Mixers
Innovation in Motionless Mixers Ross Motionless Mixers PIONEERING TECHNOLOGY. INCOMPARABLE QUALITY. WORLDWIDE LEADERSHIP. Serving all the process industries in virtually every industrialized country around
More informationRYOBI 10 in. TABLE SAW MODEL NUMBER BTS21
0 1 1 1 1 1 1 1 SEE FIGURE A 1 1 1 1 1 1 1 1 SEE FIGURE C 1 1 1 1 0 1 SEE FIGURE E 1 SEE FIGURE D 1 1 10 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1 10 1 0 1 1 0 1 1 SEE FIGURE
More informationTarget Insertion Flowmeter
Principle of Operation Flow is measured in terms of dynamic force acting on a target (solid disk) in the flow stream. Hermetically sealed, bonded strain gages in a bridge circuit configuration mounted
More informationCOMMON BLACK IRON & BLADE PARTS
LT RD HD SW PP 0 PP KIT, ALL BLADE LABEL 0 LABEL, BLADE CENTER 0 0 0 0 KIT, LABEL BLACK IRON COVER, HYDRAULICS 0 KIT, COTTER () / R PIN () PLOW PACK KIT, GREASE ZERK ( PACK) CONTROLS / MODULES CONTROL
More informationIL series. Centrifugal marine IN-LINE pumps
IL series Centrifugal marine IN-LINE pumps DESCRIPTION Vertically built centrifugal IN-LINE pumps are made with standardized DIN-22 parts, with in-line suction and discharge flanges. This arrangement requires
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More information2.1 T211 PTFE-LINED BUTTERFLY VALVE T 211 TECHNICAL DATA
-INED BUTTERFY VAVE T Fully -lined wafer type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with highcorrosive applications. TECNICA DATA Nominal diameter:
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationASTM upvc Schedule 80
ASTM upvc PRESSURE PIPING SYSTEM SPECIFICATION Pipes Standards & Quality Sch. 80 pipe is manufactured to comply with NSF Standard 61, CSA B 137.3 and ASTM D1785, consistently meeting the Quality Assurance
More informationPressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
More informationXL-580. Liste de pièces Lista de Piezas Parts List Copyright SVP Worldwide - All rights reserved
0 Copyright SVP Worldwide - All rights reserved XL-0 Liste de pièces Lista de Piezas Parts List 0-6 0 March 0 A 0 0 6 6 Singer XL-0 Pos Part No Description 0 0 THRUST WASHER 60 MAIN SHAFT WITH BALANCER
More informationPN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
More informationDIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
More informationA.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual
70 8TH AVE W PO BOX 7 SPENCER, IA 0 PHONE: 7-6-9 FAX: 7-6-08 SERVICE: 800-8- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER 0-00 BLACK MODEL
More informationParts List with Exploded Views
Parts List with Exploded Views Dual Fuel- Series Dual Fuel Range Top Parts List for Model DF Ref # Part # Description 0 Grate, Burner W/Rubber Pad 0 Burner Cap Assy, Sml 0 Burner Head 0 Venturi, Small
More informationTHE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.
P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationPVC - WHITE PRESSURE FITTINGS PRODUCTS PRICE LIST INCLUDES: PVC SCHEDULE 40, CLASS 125, POOL/SPA, LASCOTITE, ULTRAFIX REPAIR COUPLINGS PRICE GROUP
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationParts list and list of drawings
X-FEL Coupler Doc. Ref. : XFEL/05/01/MEM05/V2 Page : 1/7 Parts list and list of drawings Version n 2 Version n 1 on 30/03/05 on 28/02/05 Writed by : A. Gonnin Checked by : S. Prat On 30/11/04 On 25/03/05
More informationXL-550. Liste de pièces Lista de Piezas Parts List
SINGER is the exclusive trademark of The Singer Company S.à.r.l or its Affi liates. 0 The Singer Company Limited S.à.r.l or its Affi liates. All rights reseved. XL-0 Liste de pièces Lista de Piezas Parts
More informationS E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S
1. P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S Helical foundation pile includes a lead and extension(s). The lead section is made of a central steel
More informationWELCO VALVE. Cast Steel & Pressure Seal Swing Check Valves.
WECO VAVE Cast Steel & Pressure Seal Swg Check Valves www.cnvalveco.com Swg Check Valve, BB, CS Design The cast steel check valves are designed and manufactured to provide maximum service life and dependability.
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More information