ONOSOKKI HT Handheld Tachometer. Instruction Manual ONO SOKKI CO., LTD.

Transcription

1 ONOSOKKI HT-5200 Handheld Tachometer Instruction Manual ONO SOKKI CO., LTD.

2

3

4

5

6

7

8 HT-5200 HT-0501 Tachometer KS-300 Contact Tip KS-200 Circumferential Ring Reflective Screwdriver Manganese Batteries Instruction Carrying Case

9 IND OVER RECALL PULSE OUT MODE PULSE OUT UNIT DC IN e MAX MIN H BATT 3 2 r ON OFF LIGHT 8 7 COUNT m/min r/s r/min PERIOD ms ON HOLD HT-5200 DIGITAL TACHOMETER 1 w ONOSOKKI y t To access t and y, open w. u i o p a 9 0 q OVER MAX MIN H BATT d f COUNT m/min r/s r/min PERIOD ms g h j s

10 r/min r/s m/min COUNT PERIOD ms MAX MIN r/min r/min r/min

11

12 a

13 s d f g h j

14 Battery (+) and (-) marks

15 [UNIT Switch] [MODE Switch] RPM Tangen. speed Period Accum. count NORMAL r/min r/s m/min Period, ms Count MAX display Non-Contact measurement (HT-5100 only) MAX value r/min r/s m/min Period, ms --- MIN display MIN value r/min r/s m/min Period, ms ---

16 [UNIT Switch] [MODE Switch] RPM Tangen. speed Period Accum. count NORMAL r/min r/s m/min (mm/s) Period, ms Count Contact measurement (HT contact adaptor) MAX value r/min r/s MAX display m/min (mm/s) Period, ms --- MIN display MIN value r/min r/s m/min (mm/s) Period, ms ---

17 Reflective mark Rotating body

18 90 Minimize up/down & left/right movement. Shaft center Rotating shaft

19

20 Contact tip end angle

21

22

23

24 Other functions Measurement UNIT Switch MODE Switch NORMAL measurement MAX measurement MIN measurement Non-Contact Method Pulse output Memory recall Alarm (preset function) Power Switch ON position HOLD position r/min or r/s m/min Period, s Count (no max/min) RPM Tangen. speed Period Count 3-digit preset Alarm on/off awitch Hand hold Tripod Mount RESET switch = RECALL switch UNIT Switch MODE Switch Contact tip Other functions Measurement NORMAL measurement MAX measurement MIN measurement KS-300 Pulse output Memory recall Alarm (preset function) Curcum ring KS-200 (m/min) KS-100 (mm/s) Contact Method HT-0501 Contact Adaptor Power Switch ON position r/min or r/s Period, s Count (no max/min) RPM Period Count Use HOLD position UNIT Switch MODE Switch Tangen. speed m/min (KS-200) Tangen. speed mm/s (KS-100) Hand hold NORMAL measurement MAX measurement MIN measurement 3-digit preset Alarm on/off awitch mm/s measurement performed with "r/min" units. RESET switch = RECALL switch

25

26 (ON) (OFF) Alarm on/off switch Preset switches

27 (ON) (OFF)

28 Red light Center of rotation Reflective mark Rotating body

29 1/2 2/5 Reflective mark (mm) Radius r RPM 7 10 (10 4 )

30 [ Applied to flat surface ] [ Applied to shaft ] Reflective mark Radius r Reflective mark Rotating body Center of rotation Rotating body Center of rotation

31 Measurement pressure 30 N (approx. 3 kgf) max. Using a Contact Tip Measurement pressure 30 N (approx. 3 kgf) max. (Avoid applying pressure in any direction other than that shown here.) Using a Circumferential Ring

32

33

34

35

36

37

38

39 HT (cm) (cm) (cm) +90

40

41 IND OVER RECALL MODE UNIT DC IN (20.5) MAX MIN H BATT COUNT m/min r/s r/min PERIOD ms 218 ON 130 ON OFF LIGHT HOLD HT-5200 DIGITAL TACHOMETER 160 ONOSOKKI OUT PULSE OUT PULSE

42

43 B /IM (3) 042(MS)010