MX25-BFM SA TÜV MX25-BFM ASME MX25-BFG MX25-BFD SA TÜV MX25-BFD ASME MX25-BFS ASME
|
|
|
- Evan Walter Phelps
- 5 years ago
- Views:
Transcription
1 lfa Laval MX25 Data sheet MX25-B rame types: MX25-BM S TÜV MX25-BM SM MX25-BG MX25-BD S TÜV MX25-BD SM MX25-BS SM Return to PH types
2 DT SHT PH TYP MX25 B arrying bar Tightening bolt Support column Plate pack Guiding bar onnection Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a frame plate and a pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the channel and directs the fluids into alternate channels. The number of the plates are determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The plates and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar both of which are fixed to the support columns. onnections are located in the frame cover, or of either or both fluids make more than a single pass within the unit, the frame and pressure plates. Plates can be obtained in all pressable materials. Gaskets are available in a wide range of elastomers. 1 MX25 B dition
3 RMS MX25 rame type Pressure vessel code onnect. standard rame and pressure plates Material Material Bolt Nut Tightening bolts Number x size Max. Design/ Test pressure bar, (psig) Design temp. Notes S DIN PN10 H II S 193 B7 S 194 2H 8 x M39 10/ M NSI 150 TÜV DIN PN10 H II 8.8 / B7 8 / 2H 8 x M39 10/ SM NSI 150 S S 193 B7 S 194 2H 8 x M39 (100/150) x 1 1/2 S DIN PN16 H II S 193 B7 S 194 2H x M39 16/ NSI 150 G TÜV DIN PN16 H II 8.8 / B7 8 / 2H x M39 16/ SM NSI 150 S S 193 B7 S 194 2H x M39 (150/225) x 1 1/2 S DIN PN25 H II S 193 B7 S 194 2H x M48 25/ D NSI 300 TÜV DIN PN25 H II 8.8 / B7 8 / 2H x M48 25/ SM NSI 300 S S 193 B7 S 194 2H 16 x M48 (300/450) x 2 S SM NSI 400 S S 193 B7 S 194 2H x M48 (400/600) x 2 Notes ll frames: arrying bar in painted carbon steel. Guiding bar in stainless steel. Supporting column in carbon steel. The maximum pressure ratings are valid for plate packs with more than 30 plates. NOT! Plates, gaskets and frames may have different pressure and temperature limits. The weakest part determines the performance limit of the PH.
4 PS MX25 B GSKTS MX25 B Grade Thickness mm WP weight kg Gasket material Gasket type Max. oper. temp. T(T) Min. temp. Rec. temp. at max. pressure T(P) Notes ISI NBRP lip d ISI NBRP Glued ISI PDMT lip d ISI PDM Glued TI PDML (1) lip d Min. 0.6 SS and Ti TI PDML (1) Glued Min. 0.6 SS and Ti LLOY 254 SMO HNBR lip d LLOY HNBR Glued Plate area: Volume per channel: ree channel: low: 1.5 m l 2.5 mm Parallel PRORMN LIMITS MX25 B PS See sheet 3 05c in hapter 3 Plate material Thickness mm Max. Test pressure (bar) Max. Design pressure (bar) S, TÜV P(P) SM P(P) t max. operating temperature max. operating pressure (bar) P(T) Max. operating differential pressure (bar) DP(T) ISI ISI ISI ISI TI TI LLOY 254 SMO LLOY (1) Do not use M frames.
5 8 Plate heat exchanger type MX25 BM S, TÜV P 0/4 Hole 60 55/60 P M39 1 1/ B 280 ll dimensions in mm 0 SYMBOLS USD IN TH TBLS ND ORMULS BLOW N = of plates X = Thickness of plate material NP= of partition plates STNDRD LNGTHS (S IG. BOV) Tight. bolts Max no. of plates Main dimensions M39 X = 0.4 X = 0.5 X = 0.6 B / / / 296/ / /404 / / / / /1 168/ / /297 4/ / / / /99 155/ / / / /387 4/ / / /4 holes pressure plate LNGTHS ORDING TO SPIITION arrying bars: = 470/580 + N(4.1 + X) + NP 10 Tightening bolts: = 275/285 + N(4.1 + X) + NP 10 B = 40 = RM WIGHTS (IN KG) Type of carrying bar Normal Reinforced ( 3600) S,TÜV When 4 holes pressure pl.: add 25kg hannel plates: WP N Partition plate: 130 P PKG LNGTHS = N (2.5 + X) + NP 10 or WP see Data Sheet ONNTION TYPS ONNTION LOTIONS STNDRD D of stud bolts DN0 PN10 DN250 PN10 DN0 NSI 150 DN250 NSI M M 3/4 10UN 7/8 9UN (DN0) 326(DN250) 8 8 LOTION MDI ONN.TYP PS74651 dition 4
6 ll dimensions in mm Plate heat exchanger type MX25 BM S, TÜV 8 P 0/4 Hole 60 55/60 P 2895 M39 1 1/2 ONNTION TYPS B ONNTION LOTIONS 229 STNDRD D of stud bolts DN0 PN10 DN250 PN10 DN0 NSI 150 DN250 NSI M M 3/4 10UN 7/8 9UN (DN0) 326(DN250) 8 8 LOTION MDI ONN.TYP QUOTTION NO. ORDR NO. ITM NO. UION NO. dition PRPRD HKD ROVD
7 Plate heat exchanger type MX25 BM SM 8 P 0/4 Hole 65 55/65 P M39 1 1/ B 285 ll dimensions in mm 0 SYMBOLS USD IN TH TBLS ND ORMULS BLOW N = of plates X = Thickness of plate material NP= of partition plates STNDRD LNGTHS (S IG. BOV) Tight. bolts Max no. of plates Main dimensions M39 / 1 1/2 X = 0.4 X = 0.5 X = 0.6 B / / / 296/ / /404 / / / /1 168/ / /297 4/ / / /99 155/ / / / /387 4/ / / / /546 0/4 holes pressure plate LNGTHS ORDING TO SPIITION arrying bars: = 470/580 + N(4.1 + X) + NP 10 Tightening bolts: = 275/285 + N(4.1 + X) + NP 10 B = 40 = RM WIGHTS (IN KG) Type of carrying bar Normal Reinforced ( 3600) SM When 4 holes pressure pl.: add 100kg hannel plates: WP N Partition plate: 130 P PKG LNGTHS = N (2.5 + X) + NP 10 or WP see Data Sheet ONNTION TYPS 229 ONNTION LOTIONS 266(DN0) 326(DN250) LOTION MDI ONN.TYP STNDRD D of stud bolts DN0 NSI 150 DN250 NSI /4 10UN 7/8 9UN 93 8 PS74667 dition 5
8 ll dimensions in mm Plate heat exchanger type MX25 BM SM 8 P 0/4 Hole 65 55/65 P 2895 M39 1 1/2 B ONNTION TYPS ONNTION LOTIONS (DN0) 326(DN250) LOTION MDI ONN.TYP STNDRD D of stud bolts DN0 NSI 150 DN250 NSI /4 10UN 7/8 9UN 93 8 QUOTTION NO. ORDR NO. ITM NO. UION NO. dition PRPRD HKD ROVD
9 Plate heat exchanger type MX25 BG 8 P 0/4 Hole S,TÜV 80 65/80 SM 75 65/75 P M39 1 1/ B 300 ll dimensions in mm SYMBOLS USD IN TH TBLS ND ORMULS BLOW N = of plates X = Thickness of plate material NP= of partition plates STNDRD LNGTHS (S IG. BOV) Tight. bolts Max no. of plates Main dimensions M39 X = 0.4 X = 0.5 X = 0.6 B /94 159/ / / / / / / /561 96/92 155/ / / / / / / /549 94/90 152/8 157/ / / / /410 5/ / /4 holes pressure plate 0 LNGTHS ORDING TO SPIITION arrying bars: = 485/600 + N(4.1 + X) + NP 10 Tightening bolts: = 310/325 + N(4.1 + X) + NP 10 B = 40 = RM WIGHTS (IN KG) Type of carrying bar Normal Reinforced ( 3600) S,TÜV SM When 4 holes pressure pl.: dd kg When 4 holes pressure pl.: dd 80kg hannel plates: WP N Partition plate: 130 P PKG LNGTHS = N (2.5 + X) + NP 10 or WP see Data Sheet ONNTION TYPS ONNTION LOTIONS STNDRD D of stud bolts DN0 PN16 DN250 PN16 DN0 NSI 150 DN250 NSI M M24 3/4 10UN 7/8 9UN (DN0) 326(DN250) 8 LOTION MDI ONN.TYP PS74652 dition 3
10 Plate heat exchanger type MX25 BG ll dimensions in mm 8 P 0/4 Hole S,TÜV 80 65/80 SM 75 65/75 P 2895 M39 1 1/2 ONNTION TYPS B ONNTION LOTIONS 229 STNDRD D of stud bolts DN0 PN16 DN250 PN16 DN0 NSI 150 DN250 NSI M M24 3/4 10UN 7/8 9UN (DN0) 326(DN250) 8 LOTION MDI ONN.TYP QUOTTION NO. ORDR NO. ITM NO. UION NO. dition PRPRD HKD ROVD
11 Plate heat exchanger type MX25 BD S, TÜV 450 DN250 NSI 300 0/4 Hole 85/100 M B ll dimensions in mm SYMBOLS USD IN TH TBLS ND ORMULS BLOW N = of plates X = Thickness of plate material NP= of partition plates STNDRD LNGTHS (S IG. BOV) Tight. bolts Max no. of plates Main dimensions M48 X = 0.4 X = 0.5 X = 0.6 B /78 8/4 154/9 281/ /262 4/ / / /529 0/4 holes pressure plate 79/76 5/1 151/6 275/ / /402 4/ / /517 78/74 1/138 8/3 269/ / / / / / LNGTHS ORDING TO SPIITION arrying bars: = 505/6 + N(4.1 + X) + NP 10 Tightening bolts: = 385/400 + N(4.1 + X) + NP 10 B = 40 = RM WIGHTS (IN KG) Type of carrying bar Normal Reinforced ( 3600) When 4 holes pressure pl.: dd 0kg hannel plates: WP N Partition plate: 130 P PKG LNGTHS = N (2.5 + X) + NP or WP see Data Sheet ONNTION TYPS ONNTION LOTIONS STNDRD D of stud bolts DN0 PN25 DN250 PN25 DN0 NSI 300 DN250 NSI M24 M27 7/8 9UN 1 8UN (DN0) 326(DN250) 16 LOTION MDI ONN.TYP PS74654 dition 3
12 ll dimensions in mm Plate heat exchanger type MX25 BD S, TÜV 450 DN250 NSI 300 0/4 Hole 85/100 M ONNTION TYPS B ONNTION LOTIONS 229 STNDRD D of stud bolts DN0 PN25 DN250 PN25 DN0 NSI 300 DN250 NSI M24 M27 7/8 9UN 1 8UN (DN0) 326(DN250) 16 LOTION MDI ONN.TYP QUOTTION NO. ORDR NO. ITM NO. UION NO. dition PRPRD HKD ROVD
13 Plate heat exchanger type MX25 BD SM 450 DN250 0/4 Hole 85/100 M48 2 UN 100 B ll dimensions in mm SYMBOLS USD IN TH TBLS ND ORMULS BLOW N = of plates X = Thickness of plate material NP= of partition plates STNDRD LNGTHS (S IG. BOV) Tight. bolts Max no. of plates Main dimensions M48 2 X = 0.4 X = 0.5 X = 0.6 B /78 8/4 154/9 281/ /262 4/ / / /529 0/4 holes pressure plate 79/76 5/1 151/6 275/ / /402 4/ / /517 78/74 1/138 8/3 269/ / / / / / LNGTHS ORDING TO SPIITION arrying bars: = 505/6 + N(4.1 + X) + NP 10 Tightening bolts: = 385/400 + N(4.1 + X) + NP 10 B = 40 = RM WIGHTS (IN KG) Type of carrying bar Normal Reinforced ( 3600) SM When 4 holes pressure pl.: dd 0kg hannel plates: WP N Partition plate: 130 P PKG LNGTHS = N (2.5 + X) + NP 10 or WP see Data Sheet ONNTION TYPS ONNTION LOTIONS STNDRD D of stud bolts DN0 NSI 300 DN250 NSI /8 9UN 1 8UN (DN0) 326(DN250) 16 LOTION MDI ONN.TYP PS dition 3
14 ll dimensions in mm Plate heat exchanger type MX25 BD SM 450 DN250 0/4 Hole 85/100 M48 2 UN 100 ONNTION TYPS ONNTION LOTIONS 229 B STNDRD D of stud bolts 266(DN0) 326(DN250) LOTION MDI ONN.TYP DN0 NSI 300 DN250 NSI /8 9UN 1 8UN QUOTTION NO. ORDR NO. ITM NO. UION NO. dition PRPRD HKD ROVD
15 Plate heat exchanger type MX25 BS 450 DN250 0/4 Hole 100/115 M48 2 UN This space should be kept free from fixed installations 115 SM B ll dimensions in mm SYMBOLS USD IN TH TBLS ND ORMULS BLOW N = of plates X = Thickness of plate material NP= of partition plates STNDRD LNGTHS (S IG. BOV) Tight. bolts Max no. of plates Main dimensions M48 2 X = 0.4 X = 0.5 X = 0.6 B /71 1/ /6 274/271 2/ / / / /526 0/4 holes pressure plate 73/70 138/1 8/3 268/ / / /3 529/ /5 71/68 1/132 5/1 263/ / / / / / LNGTHS ORDING TO SPIITION arrying bars: = 5/6 + N(4.1 + X) + NP 10 Tightening bolts: = 415/430 + N(4.1 + X) + NP 10 B = 40 = + 4 RM WIGHTS (IN KG) Type of carrying bar Normal Reinforced ( 3600) SM When 4 holes pressure pl.: dd 1kg hannel plates: WP N Partition plate: 130 P PKG LNGTHS = N (2.5 + X) + NP 10 or WP see Data Sheet ONNTION TYPS ONNTION LOTIONS STNDRD D of stud bolts DN0 NSI 400 DN250 NSI UN 1 1/8 8UN (DN0) 326(DN250) 16 LOTION MDI ONN.TYP PS dition 3
16 ll dimensions in mm Plate heat exchanger type MX25 BS SM 450 DN250 0/4 Hole 100/115 M48 2 UN This space should be kept free from fixed installations 115 ONNTION TYPS ONNTION LOTIONS 229 B STNDRD D of stud bolts 266(DN0) 326(DN250) LOTION MDI ONN.TYP DN0 NSI 400 DN250 NSI UN 1 1/8 8UN QUOTTION NO. ORDR NO. ITM NO. UION NO. dition PRPRD HKD ROVD
Fluid Cooling Industrial PF Series
Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure
PLATE & FRAME HEAT EXCHANGER
PLATE & FRAME HEAT EXCHANGER By Farhan Ahmad Department of Chemical Engineering, University of Engineering & Technology Lahore Introduction The plate heat exchanger (PHE) was first introduced by Dr Richard
PR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
SmartLine Radar Level Meter RM70
Page 1 of 5 SmartLine Radar Level Meter Model Selection Guide Reliable measurement in difficult process conditions +/- 3 mm / +/-0.12" standard accuracy Operates up to a flange temperature of 200 0 C /
IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)
Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:
98 Series Backpressure Regulators and Relief Valves
9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or
Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
The 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
Application PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic
pplication Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital FOXBORO/Eckardt positioner Type SRD 992 facililates trouble free expansion to allow for
Flow rates to 590 l/min
LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball
Cartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
Flow Meter FVone-NP-CA. FVone-NP-CA 11 (Plug-in type) (Screw-in type) Recommended for: DN 20 DN 80 Required accessory: Cable type 31.
FVone-NP- 00/ (Push-in type) Recommended for: DN and bigger Required accessory: Threaded installation bush able type Optional accessory: PTFE sealing ring Locking set FVone-NP- 0/0 (Screw-in type) Recommended
G-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
Direct-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
General characteristics
General characteristics This range of insulators and partition bushings provides for connecting and supporting low- and medium-voltage electrical equipment. - Their purpose is to provide electrical and
TEPZZ 95785_A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION
(19) TEPZZ 978_A_T (11) EP 2 97 81 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: 23.12. Bulletin /2 (21) Application number: 14172928. (1) Int Cl.: F28F 3/04 (06.01) F28F 3/08 (06.01) F28F
Direct-operated 2/2-way compact solenoid valves Type EV210A
Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together
WTS Table of contents. Layout
Table of contents Thermal and hydraulic design of shell and tube heat exchangers... 2 Tube sheet data... 4 Properties of Water and Steam... 6 Properties of Water and Steam... 7 Heat transfer in pipe flow...
REDUX WAVE SPRINGS. When Size Does Matter. Now with Metric Sizes. Europe s no 1 spring company
REDUX WAVE SPRINGS When Size Does Matter Now with Metric Sizes Europe s no 1 spring company Order by telephone on 0118 978 1800 www.leespring.co.uk Ask us about free delivery ISO 9001 BUREAU VERITAS Certification
50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m
F Standardised EN 733 centrifugal pumps Hz n= 9 rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to (3 ) Head up to 9 m PPLICTION LIMITS Manometric suction lift up to 7 m Liquid temperature
Solenoid valves 2/2-way direct-operated type EV210A
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.
Right on Top. A new era in gasket technology. KLINGER The global leader in static sealing
World-wide Innovation Right on Top A new era in gasket technology www.klingerquantum.com KLINGER The global leader in static sealing Since the change-over to asbestosfree fibre gaskets, many users have
ISO-C Series chemical Pump
Structural drawing FEATURES ISO-C series chemical process pump, this product carried out the standard o GB/T perormance and dimension o axial suction centriugal pump (bar) ISO-C series pump take in appearance
Cooler-Bypass Thermostat Valve, Size 10
Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,
AIR BREATHER FILTERS. Temperature from -25 to +100 C
IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
AIR BREATHER FILTERS. Temperature from -25 C to +100 C
IR RETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
Its modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
HELLA. Linear slot diffuser. Ordering codes. HELLA - Linear diffuser. Linear Diffusers 1 / 18. Example of the ordering code HELLA B-0-0-AN
Linear Diffusers / 8 HELLA Linear slot diffuser Ordering codes HELLA - Linear diffuser HELLA - Number of slots... Diffuser length L (mm) ) Increment mm... Deflector colour Damper Diffuser construction
Pressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
Dial removed for clarity
8 7 4 1 18 19 15 1 9 24 21 24 29 17 14 20 21 29 23 22 3 40 22 25 2 44 41 39 2 32 12 33 13 12 31 43 42 ITEM QTY PART NO. DESCRIPTION 1 1 Back 2 1 Front 3 3 Spacer top 4 1 Pendulum hanger 5 1 Clock dial
Metal air breather filter
Series S Metal air breather filter 4 H 5 6 7 H H S (Materials) Screw: Galvanised Steel Washer: Teflon Cover: Steel 4 Filter element: Impregnated paper 5 Ring: Galvanised Steel 6 Seal: R 7 Connection: nodised
MADILL MBT GRAPPLE RETURN TO INDEX
MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions
Thermostatic expansion valves TUA/TUAE
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves A/AE www.danfoss.com Thermostatic expansion valves, type A/AE Contents Page Introduction... Features... Standard range...
ZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
STAINLESS STEEL MINI-CYLINDER SERIES ISO 6432 Ø mm
TN T N-YN O mm O stainless steel micro-cylinders are available in various versions with a wide range of accessories with or without magnet execution double-acting - single or through-rod gaskets: Polyurethane
Linear Guides SH Series
inear Guides S Series Ball Slide Models: A, B Front view of A and B types Side view of B type MRO B1 W B 4-M l 1 T MYO K E B 3 W2 W1 Model o. SA SB SA SB S2A S2B SA SB S3A S3B S4A S4B SA SB Assembly Ball
VISUAL LEVEL INDICATORS
VIUL LEVEL INDICTOR LV... The level indicators series is available for both static and mobile applications; the construction materials used make it possible to guarantee service with wide temperature variations
Terminal Block Accessories
Kliptite (Quick onnect) - Single Row Specifications: Terminal lock ccessories Kliptite (Quick onnect) accept standard female wire terminals. These Klipties are ideal for applications that require a positive,
BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
Cipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
Nickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
APPENDIX 2 RULES FOR BOLTED FLANGE CONNECTIONS WITH RING TYPE GASKETS
APPEDIX RULES FOR BOLTED FLAGE COECTIOS WITH RIG TYPE GASKETS -1 SCOPE GEERAL (a) The rules in Appendix apply specifically to the design of bolted flange connections with gaskets that are entirely within
Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
UNIT FOUR SOLAR COLLECTORS
ME 476 Solar Energy UNIT FOUR SOLAR COLLECTORS Flat Plate Collectors Outline 2 What are flat plate collectors? Types of flat plate collectors Applications of flat plate collectors Materials of construction
CRYOGENIC CONDUCTION COOLING TEST OF REMOVABLE PANEL MOCK-UP FOR ITER CRYOSTAT THERMAL SHIELD
CRYOGENIC CONDUCTION COOLING TEST OF REMOVABLE PANEL MOCK-UP FOR ITER CRYOSTAT THERMAL SHIELD K. Nam, a D. K. Kang, a W. Chung, a C. H. Noh, a J. Yu, b N. I. Her, b C. Hamlyn-Harris, b Y. Utin, b and K.
Orifice Plate. Stainless Steel. Flow Data. Herz Valves UK Ltd.
Stainless Steel Orifice Plate Flow Data In this flow data manual we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility should it be found that in any
Domi Mega Phone Exhaust Norton 961
This section shows how to install the Domi Mega Phones IF YOU`RE A DEALER, Consider a donation as this Manual just made your life a lot easier! If you have the Standard exhaust or the Motad Shorties and
CV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
BELGICAST is a company of. Soft Sealing Gate Valves
BEGICST is a company of Soft Sealing Gate Valves BV-0- Soft Sealing Gate Valves Body and bonnet in spherical graphite cast iron EN-GJS-00- (GGG-0), with blue Ral 0 epoxy powder coating electrostacally
135-91G00N ONE-WAY CUSTOMER UNIT FOR VAT 30GX AND Easy-aire 10GX
ON-WY TV SYSTM OR VT GX UNITS L92 LL -8-999-6 -GN ON-WY USTOMR UNIT OR VT 2GX ND VT 2GX " (8. mm) OLOR D MR IN N NVIRONMNTLLY ONTROLLD HOUSING DIMNSIONS IN MILLIMTRS (DIMNSIONS IN T-INHS) -9GN ON-WY USTOMR
C-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
SHELVING SYSTEM SYSTEM AR
F34 SHELVING SYSTEM SERIES F R SFETY SFETY shelving depth DOULE LOCKING SFETY MECHNISM The shelving system is fitted with a double locking system to allow only one shelf to be pulled out at one time. The
Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
Miniature Slide Guide Series with Retained Ball now Offers Complete Selection
Miniature Slide Guide Series with Retained Ball now Offers Complete Selection Wide type of Miniature Slide Guide, providing greater allowable moment, is now available with retained ball structure. Due
SOCKET WELD OR THREADED BODY TYPE (3051SFP FLOWMETER SHOWN THROUGHOUT / 3051CFP, 2051CFP AVAILABLE)
9 10 12 13 14 15 16 RVISION T RVISION O NO. PP' T SI1053953 3/30/17 03/31/17 SRIPTION NOT 10 N RIITION ON ST 10. T 1 - OY INSIONS 2X 1/4" NPT VNT VVS INSIONS IN SIZ 3.4 [86.0] 3.8 [97.0] 4.5 [4.0] 4.7
Experimental Study on Port to Channel Flow Distribution of Plate Heat Exchangers
Proceedings of Fifth International Conference on Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology, Eds. R.K. Shah, M. Ishizuka, T.M. Rudy, and V.V. Wadekar, Engineering
WIREWAY & TROUGH. Lay-In Type 12 Wireway... WWY 1-2. Feed-Through Type 12 Wireway... WWY 3-4. Hinge/Screw Cover Wiring Trough...
ourtesy of Steven Engineering, Inc.! 230 Ryan Way, South San Francisco, 94080-6370! ain Office: (650) 588-9200! Outside Local rea: (800) 258-9200! www.stevenengineering.com W IREWY & TROU WIREWY & TROU...
HiPace 300 with TC 400, DN 100 CF-F
HiPace 300 with TC 400, DN 100 CF-F HiPace 300 with TC 400, DN 100 CF-F Similar Image Rugged, powerful turbopump with a pumping speed of up to 260 l/s for N 2 Integrated TC 400 drive electronics Ideal
HiPace 300 with TC 110, DN 100 CF-F
HiPace 300 with TC 110, DN 100 CF-F HiPace 300 with TC 110, DN 100 CF-F Rugged, powerful turbopump with a pumping speed of up to 260 l/s for N 2 Integrated TC 110 drive electronics Ideal for UHV applications
LAW WOODEN CLOCK 5 SHT 1 OF 9 SHTS. General Assembly 1 NTS FEB Designed by: BRLAW
2 43 31 42 4 32 39 14 29 21 2 21 22 40 23 22 20 18 1 17 1 4 8 7 9 15 20 29 40 ITEM NO. QTY. PART NO. 1 1 back 2 1 front 4 1 Pendulum hanger 4 Dial spacer 7 1 Pendulum head 8 1 Pendulum pivot 9 1 Pendulum
Prima range. Alifter range. magnetical driven pumps in thermoplastic materials TMP TMA. centrifugal. self-priming
Prima range TMP centrifugal Alifter range magnetical driven pumps in thermoplastic materials TMA self-priming Prima - Alifter In this catalog Argal proposes the range of PRIMA pumps, magnetical driven,
Installation, Maintenance and Operating Instructions
Trunnion-Design Ball Valves 12 20 (DN 300 500) Series 7150 12 (DN 300) Series 730S 12 20 (DN 300 500) Series 7300 14 24 (DN 350 600) Series 9150 14 24 (DN 350 600) Series 9300 Installation, Maintenance
HiPace 300 with TC 110 and power supply pack OPS 100, DN 100 CF-F
HiPace 300 with TC 110 and power supply pack OPS 100, DN 100 CF-F HiPace 300 with TC 110 and power supply pack OPS 100, DN 100 CF-F Similar Image Rugged, powerful turbopump with a pumping speed of up to
GRANT COUNTY PORT DISTRICT NO. 1 GRANT COUNTY
GRNT COUNTY PORT DISTRICT NO. GRNT COUNTY WSHINGTON PORT COMMISSIONERS Curt. Morris President rian. Kuest Secretary Patric F. Connelly Vice President 80 IRON HORSE COURT YKIM, WSHINGTON 9890 (509) 45-48
Inspired By Challenge. Trunnion mounted ball valves
Inspired y Challenge Trunnion mounted ball valves Trunnion Mounted all Valves Trunnion 81/82 83 91/92 93/94 95/96 Ordering code system Introduction The Habonim trunnion mounted valve series is specially
Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.)
Series VVX// The models VX// have been revised. For details, please refer to catalog no. ES0-A. Similar updating Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Courtesy of Steven Engineering,
a a a a. S-2 Turbine Rev
30-4037-1a 30-4037-0a 30-4038-1a 30-4038-0a S-2 Turbine 6-8-6 Rev. 01-24-01 6-8-6 Turbine Steam Engine Engine Parts 1.) Stanchion ( black ) FB-1200024 0.25 2.) Handrail ( nickel ) FB-12040 2.00 ( 20.0x207.0mm
ROSEMOUNT 3051SAM SCALABLE PRESSURE TRANSMITTER COPLANAR FLANGE PROCESS CONNECTION
ROSOUNT 3051S S PRSSUR TRNSITTR OPNR N PROSS ONNTION RVISION T RVISION O NO. PP' T RT1066757 N. STOS 10/21/2016 SRIPTION IN-IN V S PNTW OUSIN SOWN WIT OPTION IIT ISPY (PRIRY) PNTW OUSIN (PRIRY) RTIITION
CF (Conflat Flange) Fittings - Adapters. (505)
F (onflat ) 1 Fittings - dapters www.idealvac.com (505)72-0037 1 Vacuum Fittings - dapters - olt Kits F - onflat F onflat flanges (F) are used for ultra- Vin elasmer gaskets can be used over and over but
ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
Safety valve with unit approval type MV..X.., SV..X..
Safety valve with unit approval type MV..X.., SV..X.. Operating pressure p max = 0 bar Flow Q max = 0 lpm Safety valve type CMVX 2.. with unit approval see D 77 TÜV These safety valves are intended for
2.3 T214 PTFE-LINED BUTTERFLY VALVE T 214 TECHNICAL DATA
-INED BUTTERFY VAVE T ug type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal diameter: 0 Face-to-face:
Circle one: School of Mechanical Engineering Purdue University ME315 Heat and Mass Transfer. Exam #2. April 3, 2014
Circle one: Div. 1 (12:30 pm, Prof. Choi) Div. 2 (9:30 am, Prof. Xu) School of Mechanical Engineering Purdue University ME315 Heat and Mass Transfer Exam #2 April 3, 2014 Instructions: Write your name
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NAMUR, 1/4-1/2
SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / - / / N / 0 / / Series - FTURS The monostable spool valves have TÜV-XI certifi ed I 60
Ben Wolfe 11/3/14. Figure 1: Theoretical diagram showing the each step of heat loss.
Condenser Analysis Water Cooled Model: For this condenser design there will be a coil of stainless steel tubing suspended in a bath of cold water. The cold water will be stationary and begin at an ambient
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230. KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 KTY 16-6
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230 KTY 16-6 KTY 10-x KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 Features Temperature dependent resistor with positive temperature coefficient
Our Other Range Of Products. Various Types of Cable Clamps
Our Other Range Of Products Brass Terminal Bars & Blocks Brass & Copper Earthing Accessories Brass & G. I. Conduit Fittings Brass Glands Various Types of Clamps Din Rail 8 Our Other Range Of Products Brass
Effects of Chevron Angle on Thermal Performance of Corrugated Plate Heat Exchanger
doi: 10.14355/ijepr.014.0301.0 Effects of Chevron Angle on Thermal Performance of Corrugated Plate Heat Exchanger Masoud Asadi, Ramin Haghighi Khoshkhoo Department of Mechanical Engineering, Azad Islamic
THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)
CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5
Conductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
3.1 HP 111 HIGH-PERFORMANCE BUTTERFLY VALVE HP 111 TECHNICAL DATA
HIGH-PERFORMANCE BUTTERFY VAVE HP 111 Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter:
hard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version
YR Pneumatic actuators for process automation Pneumatic connections configuration: NMUR interface V/VE Top pinion: V/VE Holes for sensor box connection: V/VE ottom holes for connecting valves: SO Single
Element description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre
Style FZ Stainless Steel Pressure filter Technical data element Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working pressure:
KSV. Slot diffusers. Ordering code. Description. Linear diffusers 1 / 16
Linear diffusers 1 / 1 KSV Slot diffusers Ordering code Number of slots Diffuser Length (mm) KSV - 1... - 19 Description KSV is an air terminal element primarily designated for air supply. It is suitable
Pressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
MR medium rating busbar
technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of
General Specifications
General Specifications Model PR10 ph Retractable fitting On-line measurements always present extra challenges compared to at-line measurements. For example when maintenance needs to be done. pplications
Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
Size : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.
P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE
PERFORMANCE ANALYSIS OF CORRUGATED PLATE HEAT EXCHANGER WITH WATER AS WORKING FLUID
PERFORMANCE ANALYSIS OF CORRUGATED PLATE HEAT EXCHANGER WITH WATER AS WORKING FLUID Tisekar Salman W 1, Mukadam Shakeeb A 2, Vedpathak Harshad S 3, Rasal Priyanka K 4, Khandekar S. B 5 1 Student of B.E.,
深圳市永旭伟业贸易有限公司 SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, NAMUR, 1/4.
SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, NMUR, / / N / /-/ Series 0 FTURS The monostable spool valves, series, have TÜV certifi ed I 60 Functional
LV-MV INSULATORS INSULATORS
LV-MV INSULATORS LV-MV INSULATORS CONTENTS LOW VOLTAGE & MEDIUM VOLTAGE INSULATORS 0 0 0 0 0 0 0 0 /0 LV Insulators type SK LV Insulators type SR LV Insulators type RD LV Insulators type DS LV Insulators
STRUCTURAL ANALYSIS OF THE LIFTING DEVICE DETECTOR SUPPORTS FOR THE LHCb VERTEX LOCATOR (VELO)
National Institute for Nuclear Physics and High Energy Physics Kruislaan 409 1098 SJ Amsterdam The Netherlands NIKHEF Reference no.: MT-VELO 04-2 EDMS no: 466608 OF THE LIFTING DEVICE DETECTOR SUPPORTS
Thermal and mechanical modeling of thermal breaks in structural steel point transmittances
Thermal and mechanical modeling of thermal breaks in structural steel point transmittances Presented to the American Society of Mechanical Engineers Presented by: Scott Hamel P.E., Ph.D. Co-Author: Sava