(V DD =3.3V,Ta=25 C) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Operating Current I DD fosc=16mhz,c L =30pF 8 ma Oscillation Stopping Current
|
|
|
- Logan Phelps
- 5 years ago
- Views:
Transcription
1 Quartz rystal Oscillator I with Selectable Divider GENERAL DESRIPTION The is a fundamental quartz crystal oscillator, up to 5MHz. The oscillation amplifier incorporates feedback resistor and capacitors (g, d), therefore, it requires no external component expect quartz crystal, and realizes very low standby current with NAND circuit. The output frequency select 6-stage to use selectable switch,, and, divided output are f, f /2, f /4, f /8, f /16 and f /32. The drivability of the 3-state output buffer is 16mA@5, thus it can drive -MOS load. Furthermore, the package is Thin-SP1. PAKAGE OUTLINE -D RB2 FEATURES Operating oltage 2. to 5.5 5MHz Low Operating High Fan-out I OH /I OL I OH /I OL Selectable Divider I OH /I OL fo, fo/2, fo/4, fo/8, fo/16 and fo/32 Oscillation Stop and Output Stand-by Function 3-State Output Buffer Oscillation apacitors g and g on-die Package Outline -MOS Technology Thin-Die/TSP-1 PAD LOATION Thin-Die N TSP-1 SELETABLE DIIDER LOGI H H H fo L H H f /2 H L H fo/4 L L H fo/8 H H L fo/16 L H L H L L fo/32 L L L OORDINATES No Pad Name X Y Starting Point:Die enter Unit[um] Die Size:.7x.95mm Thin-Die Thickness (-D):2 2um Pad Size:9x9um 218/6/2 ( 1 / 5 )
2 BLOK DIAGRAM Rf 1/2 1/2 1/2 1/2 1/2 g d Output Selector 3-State Buffer Fout TERMINAL DESRIPTION SYMBOL FUNTION Oscillation and 3-state Output Buffer onol H or OPEN Output corresponding to Selectable Divider L Oscillation Stop and High impedance Output Quartz rystal onnecting Terminals = Output Selectable Divider H H H fo L H H f /2 H L H fo/4 L L H fo/8 H H L fo/16 L H L H L L fo/32 L L L H or OPEN =2.5/3.3/5. 218/6/2 ( 2 / 5 )
3 ABSOLUTE MAXIMUM RATINGS (Ta=25 ) PARAMETER SYMBOL RATING UNIT Supply oltage -.5 to +7. IN -.5 to +.5 Output oltage O -.5 to +.5 Input 1 ma Output I O 25 ma Power Dissipation P D 32 (TSP-1) mw Operating Temperature Range Topr -4 to +85 Storage Temperature Range Tstg -55 to +125 Note1) If the supply voltage( ) is less than 7., the input voltage must not over the level though 7. is limit specified. Note2) Decupling capacitor should be connected between and due to the stabilized operation for the circuit. Note3) The power dissipation is the maximum value at only the package. ELETRIAL HARATERISTIS (Ta=25 ) Operating oltage ( =2.5,Ta=25 ) Operating I DD fosc=16mhz, L =15pF 6 ma ====, No load 4 1 ua Stand-by Ist ==, No load Note4) 1 ua,,,,, ,.75 Output OL =.25 ma I OH OH = ma I OL 6 Input = === ua = === ua =, = or.1 ua F MAX Note5) 5 MHz SYM L / L / Rise L =15pF,1 to L =3pF,1 to Fall L =15pF,9 to L =3pF,9 to Output Disable time T PLZ L =15pF,R UP =1k 2 Output Enable T PZL L =15pF,R UP =1k 2 Note4) Excluding input current on Terminal. Note5) NJR s standard crystal is used for measurement of the oscillation frequency range and it does not guaranteed oscillation. 218/6/2 ( 3 / 5 )
4 ( =3.3,Ta=25 ) Operating I DD fosc=16mhz, L =3pF 8 ma ====, No load 8 2 ua Stand-by Ist ==, No load Note4) 1 ua,,,,, ,.99 Output OL =.33 ma I OH OH = ma I OL 8 Input = === ua = === ua =, = or.1 ua F MAX Note5) 5 MHz SYM L / L / Rise L =15pF,1 to L =3pF,1 to Fall L =15pF,9 to L =3pF,9 to Output Disable time T PLZ L =15pF,R UP =1k 15 Output Enable T PZL L =15pF,R UP =1k 15 ( =5.,Ta=25 ) Operating I DD fosc=16mhz, L =5pF 15 ma ====, No load 2 4 ua Stand-by Ist ==, No load Note4) 1 ua,,,,, , 1.5 Output OL =.5 ma I OH OH = ma I OL 16 Input = === ua = === ua =, = or.1 ua F MAX Note5) 5 MHz SYM L / L / Rise L =15pF,1 to L =5pF,1 to Fall L =15pF,9 to L =5pF,9 to Output Disable time T PLZ L =15pF,R UP =1k 1 Output Enable T PZL L =15pF,R UP =1k 1 Note4) Excluding input current on Terminal. Note5) NJR s standard crystal is used for measurement of the oscillation frequency range and it does not guaranteed oscillation. 218/6/2 ( 4 / 5 )
5 MEASUREMENT IRUITS (1) 1pF 1/2 5 L=15/3/5pF H L (2) Rise/Fall 1pF 5 L=15/3/5pF (3)Output Disable/Enable R UP=1k L=15pF T PLZ OL OH T PZL [AUTION] The specificatio on this data book are only given for information, without any guarantee as regards either mistakes or omissio. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the indusial rights. 218/6/2 ( 5 / 5 )
NJU BIT PARALLEL TO SERIAL CONVERTER PRELIMINARY PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
PRELIMINARY 11-BIT PARALLEL TO SERIAL CONVERTER GENERAL DESCRIPTION The NJU3754 is an 11-bit parallel to serial converter especially applying to MCU input port expander. It can operate from 2.7V to 5.5V.
Octal 3-State Noninverting D Flip-Flop
TEHNIAL ATA IN74H74A Octal 3-State Noninverting Flip-Flop High-Performance Silicon-Gate MOS N SUFFIX PLASTI IP The IN74H74A is identical in pinout to the LS/ALS74. The device inputs are compatible with
74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver
74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed
NTE74HC173 Integrated Circuit TTL High Speed CMOS, 4 Bit D Type Flip Flop with 3 State Outputs
NTE74HC173 Integrated Circuit TTL High Speed CMOS, 4 Bit D Type Flip Flop with 3 State Outputs Description: The NTE74HC173 is an high speed 3 State Quad D Type Flip Flop in a 16 Lead DIP type package that
74LS240 / 74LS241 Octal 3-STATE Buffer/Line Driver/Line Receiver
74LS240 / 74LS241 Octal 3-STATE Buffer/Line Driver/Line Receiver General Description These buffers/line drivers are designed to improve both the performance and PC board deity of 3-STATE buffers/ drivers
PO3B20A. High Bandwidth Potato Chip
FEATURES: Patented technology High signal -3db passing bandwidth at 1.6GHz Near-Zero propagation delay CC = 1.65 to 3.6 Ultra-Low Quiescent Power: 0.1 A typical Ideally suited for low power applications
DM74LS240 DM74LS241 Octal 3-STATE Buffer/Line Driver/Line Receiver
Octal 3-STATE Buffer/Line Driver/Line Receiver General Description These buffers/line drivers are designed to improve both the performance and PC board deity of 3-STATE buffers/ drivers employed as memory-address
74LCX16374 Low Voltage 16-Bit D-Type Flip-Flop with 5V Tolerant Inputs and Outputs
74LCX16374 Low oltage 16-Bit D-Type Flip-Flop with 5 Tolerant Inputs and Outputs General Description The LCX16374 contains sixteen non-inverting D-type flip-flops with 3-STATE outputs and is intended for
74LCX16374 Low Voltage 16-Bit D-Type Flip-Flop with 5V Tolerant Inputs and Outputs
74LCX16374 Low oltage 16-Bit D-Type Flip-Flop with 5 Tolerant Inputs and Outputs General Description The LCX16374 contains sixteen non-inverting D-type flip-flops with 3-STATE outputs and is intended for
DM74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver
DM74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed
S6B CH SEGMENT / COMMON DRIVER FOR DOT MATRIX LCD
6B006 0 H EGENT / OON RIVER FOR OT ATRIX L June. 000. Ver. 0.0 ontents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by
Io=500mA LDO with Reset function
Io=mA LDO with Reset function GENERAL DESCRIPTION The NJW4116 is a ma output low dropout voltage regulator with reset function monitoring output voltage. Reset Output Hold Time is adjustable by external
74LCX841 Low Voltage 10-Bit Transparent Latch with 5V Tolerant Inputs and Outputs
74LCX841 Low oltage 10-Bit Traparent Latch with 5 Tolerant Inputs and Outputs General Description The LCX841 coists of ten latches with 3-STATE outputs for bus organized system applicatio. The device is
ILX485 Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers
Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers General Description The ILX485 is low-power transceivers for RS-485 and RS- 422 communication. I contains one driver and one receiver. The driver
74LCXH Low Voltage 16-Bit D-Type Flip-Flop with Bushold and 26Ω Series Resistors in Outputs
February 2001 Revised October 2001 74LCXH162374 Low oltage 16-Bit D-Type Flip-Flop with Bushold and 26Ω Series Resistors in Outputs General Description The LCXH162374 contains sixteen non-inverting D-type
NTE74HC299 Integrated Circuit TTL High Speed CMOS, 8 Bit Universal Shift Register with 3 State Output
NTE74HC299 Integrated Circuit TTL High Speed CMOS, 8 Bit Universal Shift Register with 3 State Output Description: The NTE74HC299 is an 8 bit shift/storage register with three state bus interface capability
Quad 2-Input NAND Gate with Open-Drain Outputs High-Performance Silicon-Gate CMOS
IN74C3A Quad 2-Input NAND ate with Open-Drain Outputs igh-performance Silicon-ate CMOS The IN74C3A is identical in pinout to the LS/ALS3. The device inputs are compatible with standard CMOS outputs; with
74HC257; 74HCT257. Quad 2-input multiplexer; 3-state
Product data sheet 1. General description 2. Features The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The has four identical 2-input multiplexers with
MM74HC574 3-STATE Octal D-Type Edge-Triggered Flip-Flop
MM74HC574 3-STATE Octal D-Type Edge-Triggered Flip-Flop General Description The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high
LH5P832. CMOS 256K (32K 8) Pseudo-Static RAM
LH5P832 CMOS 256K (32K 8) Pseudo-Static RAM FEATURES 32,768 8 bit organization Access time: 100/120 ns (MAX.) Cycle time: 160/190 ns (MIN.) Power consumption: Operating: 357.5/303 mw Standby: 16.5 mw TTL
DM74S373 DM74S374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops
3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops General Description These 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or
DM74LS373 DM74LS374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops
DM74LS373 DM74LS374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops General Description These 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving
74HC573; 74HCT573. Octal D-type transparent latch; 3-state. The 74HC573; 74HCT573 is functionally identical to:
Product data sheet 1. General description The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The has octal D-type transparent latches featuring separate
HM6264A Series. Features. Ordering Information word 8-bit High Speed CMOS Static RAM
8192-word 8-bit High Speed CMOS Static RAM Features Low-power standby 0.1 mw (typ) 10 µw (typ) L-/LL-version Low power operation 15 mw/mhz (typ) Fast access time l00/120/ (max) Single +5 V supply Completely
Features Y Wide supply voltage range 3 0V to 15V. Y High noise immunity 0 45 VDD (typ ) Y Low power TTL fan out of 2 driving 74L
CD4025 CD4023BM CD4023BC Buffered Triple 3-Input NAND Gate CD4025BM CD4025BC Buffered Triple 3-Input NOR Gate General Description These triple gates are monolithic complementary MOS (CMOS) integrated circuits
BCD-TO-DECIMAL DECODER HIGH-VOLTAGE SILICON-GATE CMOS IW4028B TECHNICAL DATA
TECHNICAL DATA BCD-TO-DECIMAL DECODER HIGH-OLTAGE SILICON-GATE CMOS IW4028B The IW4028B types are BCD-to-decimal or binary-tooctal decoders consisting of buffering on all 4 inputs, decoding-logic gates,
Octal 3-State Noninverting Transparent Latch
SL74HC73 Octal 3-State Noninverting Traparent Latch High-Performance Silicon-Gate CMOS The SL74HC73 is identical in pinout to the LS/ALS73. The device inputs are compatible with standard CMOS outputs;
74LCX760 Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and Open Drain Outputs
July 2001 74LCX760 Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and Open Drain Outputs General Description The LCX760 is the Open Drain version of the LCX244. The LCX760 contains eight non-inverting
Quad 2-input NAND gate
Quad 2-input NAND gate BU40B / BU40BF / BU40BF The BU40B, BU40BF, and BU40BF are dual-input positive logic NAND gates. Four circuits are contained on a single chip. An inverter-based buffer has been added
74LVX374 Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs
Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs General Description The LVX374 is a high-speed, low-power octal D-type flipflop featuring separate D-type inputs for each flip-flop and 3-STATE outputs
Dual 4-Input AND Gate
TENIAL DATA Dual 4-Input AND ate The is high-speed Si-gate MOS device and is pin compatible with low power Schottky TTL (LSTTL). The device provide the Dual 4-input AND function. Outputs Directly Interface
74HC573; 74HCT573. Octal D-type transparent latch; 3-state. The 74HC573; 74HCT573 is functionally identical to:
Product data sheet 1. General description The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The has octal D-type transparent latches featuring separate
MM74HC244 Octal 3-STATE Buffer
MM74HC244 Octal 3-STATE Buffer General Description The MM74HC244 is a non-inverting buffer and has two active low enables (1G and 2G); each enable independently controls 4 buffers. This device does not
SA CH SEGMENT /COMMON DRIVER FOR DOT MATRIX LCD
A06 A06 0 H EGMENT /OMMON RIVER FOR OT MATRIX L Ver. July, 000 A06 INTROUTION The A06 is an L driver LI which is fabricated by low power MO high voltage process technology. In segment driver mode, it can
4-Channel Electronic Volume with Input Selector. Available for using four chips on same serial bus line
4-Channel Electronic Volume with Input Selector GENERAL DESCRIPTION The NJW1195A is a 4-channel electronic volume with 4-in 2-out stereo audio selector. It performs low noise and low distortion characteristics
NTE4501 Integrated Circuit CMOS, Dual 4 Input NAND Gate, 2 Input NOR/OR Gate, 8 Input AND/NAND Gate
NTE4501 Integrated Circuit CMOS, Dual 4 Input NAND Gate, 2 Input NOR/OR Gate, 8 Input AND/NAND Gate Description: The NTE4501 is a triple gate device in a 16 Lead DIP type package constructed with MOS P
PO3B14A. Description. Truth Table. High Bandwidth Potato Chip V CC N.C. EN EN S 1 A 3 B 3 B 2 A 2 A 1 B 1 Y A Y B GND
www.potatosemi.com FEATURES: Patented technology High signal -3db passing bandwidth at 1.2GHz Near-Zero propagation delay VCC = 1.65V to 3.6V Ultra-Low Quiescent Power: 0.1 A typical Ideally suited for
74LCX112 Low Voltage Dual J-K Negative Edge-Triggered Flip-Flop with 5V Tolerant Inputs
June 1998 Revised February 2001 74LCX112 Low oltage Dual J-K Negative Edge-Triggered Flip-Flop with 5 Tolerant Inputs General Description The LCX112 is a dual J-K flip-flop. Each flip-flop has independent
Triple 3-Input NOR Gate
TENIAL DATA IN4T2A Triple 3-Input NOR ate The IN4T2A is high-speed Si-gate MOS device and is pin compatible with low power Schottky TTL (LSTTL). The device provide the Triple 3-input NOR function. Outputs
Hex 3-State Noninverting Buffer with Common Enables High-Performance Silicon-Gate CMOS
TECNICAL DATA IN74C365A ex 3-State Noninverting Buffer with Common Enables igh-performance Silicon-ate CMOS The IN74C365A is identical in pinout to the LS/ALS365. The device inputs are compatible with
74FR244 Octal Buffer/Line Driver with 3-STATE Outputs
74FR244 Octal Buffer/Line Driver with 3-STATE Outputs General Description The 74FR244 is a non-inverting octal buffer and line driver designed to be employed as memory and address driver, clock driver
DM74LS670 3-STATE 4-by-4 Register File
DM74LS670 3-STATE 4-by-4 Register File General Description August 1986 Revised March 2000 These register files are organized as 4 words of 4 bits each, and separate on-chip decoding is provided for addressing
MM74HC540 MM74HC541 Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer
September 1983 Revised February 1999 MM74HC540 MM74HC541 Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer General Description The MM74HC540 and MM74HC541 3-STATE buffers utilize advanced silicon-gate
NTE74177 Integrated Circuit TTL 35Mhz Presettable Binary Counter/Latch
NTE74177 Integrated Circuit TTL 35Mhz Presettable Binary Counter/Latch Description: The NTE74177 is a high speed monolithic counter in a 14 Lead plastic DIP type package consisting of four DC coupled master
74VHC573 Octal D-Type Latch with 3-STATE Outputs
74HC573 Octal D-Type Latch with 3-STATE Outputs General Description Ordering Code: March 1993 Revised April 1999 The HC573 is an advanced high speed CMOS octal latch with 3-STATE output fabricated with
Features. Y TRI-STATE versions LS157 and LS158 with same pinouts. Y Schottky-clamped for significant improvement in A-C.
54LS257A DM54LS257B DM74LS257B 54LS258A DM54LS258B DM74LS258B TRI-STATE Quad 2-Data Selectors Multiplexers General Description These Schottky-clamped high-performance multiplexers feature TRI-STATE outputs
NC7SP05 TinyLogic ULP Inverter (Open Drain Output)
TinyLogic ULP Inverter (Open Drain Output) General Description The NC7SP05 is a single inverter with open drain output from Fairchild s Ultra Low Power (ULP) series of TinyLogic. Ideal for applications
NL27WZ126. Dual Buffer with 3 State Outputs. The NL27WZ126 is a high performance dual noninverting buffer operating from a 1.65 V to 5.5 V supply.
Dual Buffer with 3 State Outputs The NL27WZ126 is a high performance dual noninverting buffer operating from a 1.65 to 5.5 supply. Features Extremely igh Speed: t PD 2.6 ns (typical) at = 5.0 Designed
CD4514BC CD4515BC 4-Bit Latched/4-to-16 Line Decoders
CD4514BC CD4515BC 4-Bit Latched/4-to-16 Line Decoders General Description The CD4514BC and CD4515BC are 4-to-16 line decoders with latched inputs implemented with complementary MOS (CMOS) circuits constructed
MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter
MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power
74HC574; 74HCT574. Octal D-type flip-flop; positive edge-trigger; 3-state
Rev. 7 4 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device
Dual 4-Input AND Gate
TENIAL DATA IN42A Dual 4-Input AND ate The IN42A is high-speed Si-gate MOS device and is pin compatible with pullup resistors with low power Schottky TTL (LSTTL). The device provide the Dual 4-input AND
MM74HCT573 MM74HCT574 Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop
February 1990 Revised May 1999 MM74HCT573 MM74HCT574 Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT573 octal D-type latches and MM74HCT574 octal D-type flip-flop advanced
74ACT Bit D-Type Flip-Flop with 3-STATE Outputs
74ACT18823 18-Bit D-Type Flip-Flop with 3-STATE Outputs General Description The ACT18823 contains eighteen non-inverting D-type flipflops with 3-STATE outputs and is intended for bus oriented applications.
CD4071BC CD4081BC Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate
Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate General Description The CD4071BC and CD4081BC quad gates are monolithic complementary MOS (CMOS) integrated circuits cotructed
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. September 2001 S7C256 5V/3.3V 32K X 8 CMOS SRM (Common I/O) Features S7C256
74ACT825 8-Bit D-Type Flip-Flop
8-Bit D-Type Flip-Flop General Description The ACT825 is an 8-bit buffered register. They have Clock Enable and Clear features which are ideal for parity bus interfacing in high performance microprogramming
MM74HC374 3-STATE Octal D-Type Flip-Flop
3-STATE Octal D-Type Flip-Flop General Description The MM74HC374 high speed Octal D-Type Flip-Flops utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption
NTE74176 Integrated Circuit TTL 35Mhz Presettable Decade Counter/Latch
NTE74176 Integrated Circuit TTL 35Mhz Presettable Decade Counter/Latch Description: The NTE74176 is a high speed monolithic counter in a 14 Lead plastic DIP type package consisting of four DC coupled master
IN74HC164А 8-Bit Serial-Input/Parallel-Output Shift Register
TECHNICAL DATA IN74HC164А 8-Bit Serial-Input/Parallel-Output Shift Register High-Performance Silicon-Gate CMOS The IN74HC164 is identical in pinout to the LS/ALS164. The device inputs are compatible with
MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop
MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicon-gate CMOS
Dual D Flip-Flop with Set and Reset High-Speed Silicon-Gate CMOS
TECHNICAL DATA IN74ACT74 Dual D Flip-Flop with Set and Reset High-Speed Silicon-Gate CMOS The IN74ACT74 is identical in pinout to the LS/ALS74, HC/HCT74. The IN74ACT74 may be used as a level converter
Octal 3-State Noninverting Transparent Latch
TECNICAL DATA IN74CT373A Octal 3-State Noninverting Transparent Latch The IN74CT373A may be used as a level converter for interfacing TTL or NMOS outputs to igh-speed CMOS inputs. The IN74CT373A is identical
MM74HC574 3-STATE Octal D-Type Edge-Triggered Flip-Flop
3-STATE Octal D-Type Edge-Triggered Flip-Flop General Description The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity
Octal 3-State Noninverting Buffer/Line Driver/Line Receiver High-Performance Silicon-Gate CMOS
TECNICAL DATA IN74C244A Octal 3-State Noninverting Buffer/Line Driver/Line Receiver igh-performance Silicon-ate CMOS The IN74C244A is identical in pinout to the LS/ALS244. The device inputs are compatible
SC1301A/B. 2A High Speed Low-Side MOSFET Driver in SOT-23 POWER MANAGEMENT. Applications. Typical Application Circuit
查询 SC1301B 供应商 Description The is a cost effective single-channel highspeed MOSFET driver. The driver is capable of driving a 1000pF load in 0ns rise/fall time and has a 60ns propagation delay time from
CD4093BC Quad 2-Input NAND Schmitt Trigger
CD4093BC Quad 2-Input NAND Schmitt Trigger General Description The CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a 2-input NAND gate with Schmitttrigger action on both inputs.
CD4028BC BCD-to-Decimal Decoder
CD4028BC BCD-to-Decimal Decoder General Description The CD4028BC is a BCD-to-decimal or binary-to-octal decoder consisting of 4 inputs, decoding logic gates, and 10 output buffers. A BCD code applied to
NJW CHANNEL ELECTRONIC VOLUME
2-CHANNEL ELECTRONIC VOLUME GENERAL DESCRIPTION NJW9 is a two channel electronic volume IC. It is included output buffer amplifier and also resistor output terminal for using external amplifier to customize
Programmable Timer High-Performance Silicon-Gate CMOS
TECNICAL DATA Programmable Timer igh-performance Silicon-ate CMOS The IW1B programmable timer consists of a 16-stage binary counter, an oscillator that is controlled by external R-C components (2 resistors
HN58C66 Series word 8-bit CMOS Electrically Erasable and Programmable CMOS ROM. ADE F (Z) Rev. 6.0 Apr. 12, Description.
8192-word 8-bit CMOS Electrically Erasable and Programmable CMOS ROM ADE-203-375F (Z) Rev. 6.0 Apr. 12, 1995 Description The Hitachi HN58C66 is a electrically erasable and programmable ROM organized as
CD40106BC Hex Schmitt Trigger
CD40106BC Hex Schmitt Trigger General Description The CD40106BC Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N and P-channel enhancement transistors.
MM74HC251 8-Channel 3-STATE Multiplexer
8-Channel 3-STATE Multiplexer General Description The MM74HC251 8-channel digital multiplexer with 3- STATE outputs utilizes advanced silicon-gate CMOS technology. Along with the high noise immunity and
1-OF-8 DECODER/DEMULTIPLEXER High-Speed Silicon-Gate CMOS
1-OF-8 DECODER/DEMULTIPLEXER High-Speed Silicon-Gate CMOS The IN74AC138 is identical in pinout to the LS/ALS138, HC/HCT138. The device inputs are compatible with standard CMOS outputs; with pullup resistors,
8-Input Data Selector/Multiplexer with 3-State Outputs High-Performance Silicon-Gate CMOS
TECNICAL DATA IN74C251A 8-Input Data Selector/Multiplexer with 3-State Outputs igh-performance Silicon-ate CMOS The IN74C251A is identical in pinout to the LS/ALS251. The device inputs are compatible with
Dual JK Flip-Flop IW4027B TECHNICAL DATA PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE. Rev. 00
TECHNICAL DATA IW027B Dual JK Flip-Flop The IW027B is a Dual JK Flip-Flop which is edge-triggered and features independent Set, Reset, and Clock inputs. Data is accepted when the Clock is LOW and traferred
UNISONIC TECHNOLOGIES CO., LTD U74LVC1G125
UNISONIC TECHNOLOGIES CO., LTD U74LVC1G125 BUS BUFFER/LINE DRIVER 3-STATE DESCRIPTION The U74LVC1G125 is a single bus buffer/line driver with 3-state output. When the output enable ( ΟΕ ) is high the output
74LV374 Octal D-type flip-flop; positive edge-trigger (3-State) INTEGRATED CIRCUITS
INTEGRATE CIRCUITS Octal -type flip-flop; positive edge-trigger (3-State) Supersedes data of 1996 Feb IC24 ata Handbook 1997 Mar 20 FEATURES Wide operating voltage: 1.0 to 5.5 Optimized for Low oltage
MM74HCT573 MM74HCT574 Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop
February 1990 Revised May 2005 MM74HCT573 MM74HCT574 Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT573 octal D-type latches and MM74HCT574 octal D-type flip-flop advanced
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. DS0026 Dual High-Speed MOS Driver General Description DS0026 is a low cost
Switching Regulators MC33063A SOP
MC0A Features Operation from.0 to 0 Input Low Standby Current Current Limiting Output oltage Adjustable Frequency Operation to 00 khz Pb Free Packages are Available Output Current to. A SOP- 0. 0.0-0.0.0
LB1846M, 1848M. Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver
Ordering number : ENN5339A Monolithic Digital IC LB1846M, 1848M Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver Overview The LB1846M and LB1848M are 2-channel low-voltage, low saturation
AIC431/TL431A/TL431. Adjustable Precision Shunt Regulators FEATURES DESCRIPTION TYPICAL APPLICATION CIRCUIT. Precision Regulator
/TL431A/TL431 Adjustable Precision Shunt Regulators FEATURES Unconditionally Stable. Precision Reference Voltage. :2.495V ±0.5% TL431A :2.495V ±1.0% TL431 :2.495V ±1.6% Sink urrent apability: 200mA. Minimum
MM74HC373 3-STATE Octal D-Type Latch
3-STATE Octal D-Type Latch General Description The MM74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption
MM74HC373 3-STATE Octal D-Type Latch
MM74HC373 3-STATE Octal D-Type Latch General Description The MM74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power
54173 DM54173 DM74173 TRI-STATE Quad D Registers
54173 DM54173 DM74173 TRI-STATE Quad D Registers General Description These four-bit registers contain D-type flip-flops with totempole TRI-STATE outputs capable of driving highly capacitive or low-impedance
USB1T20 Universal Serial Bus Transceiver
Universal Serial Bus Transceiver General Description The USB1T20 is a generic USB 2.0 compliant transceiver. Using a single voltage supply, the USB1T20 provides an ideal USB interface solution for any
Excellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Fairchild Semiconductor CD4050BCN For any questio, you can email us
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS DESCRIPTION The U74LVC125A consists of four bus buffers with 3-state output controlled by enable input ( ΟΕ ), when ΟΕ is high,
HN58C256 Series word 8-bit Electrically Erasable and Programmable CMOS ROM
32768-word 8-bit Electrically Erasable and Programmable CMOS ROM ADE-203-092G (Z) Rev. 7.0 Nov. 29, 1994 Description The Hitachi HN58C256 is a electrically erasable and programmable ROM organized as 32768-word
74VHC373 Octal D-Type Latch with 3-STATE Outputs
74HC373 Octal D-Type Latch with 3-STATE Outputs General Description Ordering Code: February 1993 Revised April 1999 The HC373 is an advanced high speed CMOS octal D- type latch with 3-STATE output fabricated
MM74C93 4-Bit Binary Counter
MM74C93 4-Bit Binary Counter General Description The MM74C93 binary counter and complementary MOS (CMOS) integrated circuits cotructed with N- and P- channel enhancement mode traistors. The 4-bit binary
MM74HC573 3-STATE Octal D-Type Latch
MM74HC573 3-STATE Octal D-Type Latch General Description The MM74HC573 high speed octal D-type latches utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low
MM74HCT540 MM74HCT541 Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer
February 1984 Revised February 1999 MM74HCT540 MM74HCT541 Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer General Description The MM74HCT540 and MM74HCT541 3-STATE buffers utilize advanced silicon-gate
S-4670A. 128-bit THERMAL HEAD DRIVER FEATURES BLOCK DIAGRAM. Rev. 1.1
Rev. 1.1 128-bit THERMAL HEAD DRIVER S-4670A The S-4670A is a CMOS thermal head driver containing 128-bit (64 x 2) shift registers and latches. High speed operation at 16 MHz clock frequency together with
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT DESCRIPTION The U74AUC1G126 is single bus buffer gate with 3-state output. The output is disabled When the output enable (OE) is
Neotec Semiconductor Ltd. 新德科技股份有限公司
rystalfontz Neotec emiconductor Ltd. L river INTROUTION The is a L driver LI that is fabricated by low power MO high voltage process technology. In segment drive mode, it can be interfaced in -bit serial
BCD-to-decimal decoder
-to-decimal decoder U0 The U0 is a decoder which converts signals to decimal signals. Of the ten outputs to, those corresponding to the to input codes are set to, and the others are all set to. If inputs
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD BUS BUFFER/LINE DRIVER 3-STATE DESCRIPTION The U74LVC1G125 is a single bus buffer/line driver with 3-state output. When the output enable ( ΟΕ ) is high the output will be
HN58C65 Series word 8-bit Electrically Erasable and Programmable CMOS ROM
8192-word 8-bit Electrically Erasable and Programmable CMOS ROM ADE-203-374A (Z) Rev. 1.0 Apr. 12, 1995 Description The Hitachi HN58C65 is a electrically erasable and programmable ROM organized as 8192-word