Package Vibration Test Report
|
|
- Augustine Stanley
- 5 years ago
- Views:
Transcription
1 i Package Vibration Test Report Issue by Product Model Product Description Engineering Department Report No:0710VP0187 Rugged LCD : WRD1040 New product Rugged Display PCB: i-tech / R5W-310 Rugged Display Renew product PCB: BIOS: Test Reason Revision change PCB: BIOS: Component: 2007/10/11 Issue date Lindon Lin Approved Polo Chang Test Engineer I
2 1.Document Introduction This document describes how we conduct the environment conditions and test procedure. It includes the test equipment we use,the test condition,and the test procedure we take. We also define our test criteria and the way to conclude the test result. (According to client's test specification, please see following sheets in detail.) Table of Testing Summary Results NO Test Item Condition Description Sect. 1 Vibration Test -Package -Random vibration: 5 Hz ~ 500 Hz -Impact acceleration: 2.16Grms -Axis of vibration: Longitudinal-X, Lateral-Y, Vertical-Z -Duration time: each axis 30 min. / Page 4 IA Reference to IEC Product Configuration 1. A/D Board : i-tech / R5W Display : Panel 10.4 Mitsubishi/AA104SG01 3. Inverter: TPCI For 10.4 WM System FAN: NO
3 3. Product Configuration of Photo EUT of Photo Top View Bottom View C3f o <^m«c Front View Back View Right Side View Left Side View
4 4. Vibration Test (Package) A. Test Equipment: - Test Site: i-tech LAB -Vibration Tester :King Design / EM-600F2K-50N120 (S/N:BT ) - Controller :Dactron Photon PH-100 RT-PRO (S/N: ) - Control Accelerometer: B&K 4398A (S/N: ) - PC System: HP/ Brio BA600 (S/N:SG ) B. LAB Environmental Conditions: Ambient Temperature :25 +/- 3 C -Relative Humidity :55 +/- 20% RH C. Test Method / Specification : -Standard of IEC Random vibration: 5 Hz ~ 500 Hz Impact acceleration: 2.16Grms Axis of vibration: Longitudinal-X, Lateral-Y, Vertical-Z Duration time: each axis 30 min. Total Time: 1.5 hours -Quantity : Total 1 Set -Testing Period: Oct. 9, 2007 to Oct. 9,2007 PSD g2/hz 2.16 Grms 5Hz 100Hz 500Hz 4
5 Frequency (Hz) Left Slope (db/oct.) PSD (92/Hz) Right Slope (db/oct.) > equivalent to 2.16 Grms C. Check Condition and Requirements: Place the product on the vibration table in its non-operating orientation and configuration. The product shall be fixture to the vibration table such that the vibration input is transmitted directly to the product. Do not operate the product during this test. Vibrate the product up to frequency range at a rate of 5 to 500 Hz. At the appropriate level in the table of test condition in each of three orthogonal axes. The test shall last approximately 30 minutes per axis. Equivalent to 2.16Grms. Power on the product at this step, document the result after the check. The functional and electrical check is required, document the result after the check. P. Test Result: No visible damage to the product. No displacement of components, cables, or hardware. The exterior container must not be broken exposing the contents. The test unit operates normally after the completion of the vibration test. E. Test Judgment: Test Result as below: ^"Check Item Appearance check (Visual check) Functional & Style ltem". Initial Final Performance No. ^ check Rugged PC : WRD1040 No visible damage No visible damage Normal 5
6 Testing of Photo l-tech Operating Vibration Test Z axis Operating Vibration Test Z axis Operating Vibration Test X axis Operating Vibration Test X axis Operating Vibration Test Y axis Operating Vibration Test Y axis
7 I-TECH F Appearance of specimen Functional check (G)2/Hz ; / ^"^ /~~ / -^ AAL ^ / /- 1 "/ IN 1 A '1 A V /v VJ A^ / J T V ' I. k. Profile(f) High Abort(f) Low Abort(f) High Alarm(f) Low Alarm(f) ; i i i i i i I I I Frequency(Hz) >'J, ' % i Hi, Frequency response spectrum: X axis,
8 (G)2/Hz ; Profile(f) High Abort(f) Low Abort(f) High Alarm(f) Low Alarm(f) Control(f) ; / ~ /' v A A I ia ra I» V J H 1 * ; J 1 Frequency(Hz) Frequency response spectrum: Y axis ',# i D (G)2/Hz /" ^ /~ >. x/ / v_ "N, / -A "-V ~V V J /V -i "V Profile(f) High Abort(f) Low Abort(f) High Alarm(f) Low Alarm(f) "1 1 i i i i i i i i i i i i i i X, 5. D Frequencv(Hz) Frequency response spectrum: Z axis
Operating Vibration Test Report
Operating Vibration Test Report I-TECH Issue by Engineering Department Product Model Product Description Report No:0807VO0255 8.4" Rugged LCD : WRD0840 New product Rugged Display A/D Board :i-tech / R5W-310
More informationThermal Test Report. Issue by. Certification Center. 20.1" Bus Bundle : WCH2000-BUS. Test Reason. Product Model Product Description
Thermal Test Report Issue by Product Model Product Description Certification Center Report No:0906TT0249 20.1" Bus Bundle : WCH2000-BUS New product Bus Bundle A/D Board : itech 20.1" Bus Bundle / S2M210
More informationVerification Test Report J11458-Val
Verification Test Report Product Tested: Test Type: Standard: VCCM600 Power Supplies Verification Testing Customer Specified Environmental Testing Non-operational and operational EN60068-2-27 Mechanical
More informationQualification Test Report
Qualification Test Report 501-97 28Jun10 Rev E Connector, Shielded, Miniature Circular DIN, PCB Mounted 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics Mini DIN Printed Circuit Board
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationTEST REPORT ENVIRONMENTAL TESTING
Report No.: 19616025 001 Page 2 of 13 Report reference No... : 19616025 001 TEST REPORT ENVIRONMENTAL TESTING Tested by (printed name and signature)... : (see cover page) Approved by (printed name and
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationProduct Dimension Recommended Solder Pad
1,45±0,2 Product Identification GMWI - 201209-1R0 M R 1 2 3 4 5 1 :Product Code 2 :Dimension Code (mm) 3 :Inductance 4 :Tolerance Code :N = ±30%,M = ±20% 5 :Code for Special Specification Product Dimension
More informationReference Only Spec. No. JEFL243B 0003F-01 P 1/ 6
Spec. No. JEFL243B 0003F-01 P 1/ 6 DC Common Mode Choke Coil PLT09HN2003R0P1B Reference Specification 1. Scope This reference specification applies to DC Common Mode Choke Coil (PLT09H Series). 2. Part
More informationQualification Test Report. Modular Plugs, Unshielded and Shielded
Qualification Test Report 501-131013 26 JAN 16 Rev. A Modular Plugs, Unshielded and Shielded 1. INTRODUCTION 1.1. Purpose Testing was performed on modular plugs to determine their conformance to the requirements
More informationChapter 3. Experimentation and Data Acquisition
48 Chapter 3 Experimentation and Data Acquisition In order to achieve the objectives set by the present investigation as mentioned in the Section 2.5, an experimental set-up has been fabricated by mounting
More informationProduct Specification
Product Specification 2013-10-21 FPC Connector 0.5mm Pitch SMT Type Bottom Contact H:2.0 Update List: Item Update Description Rev. Issued Date Revisor 1 New Edit A 2013/10/21 DLITY Prepared By DLITY Rechecked
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
More informationTechnical Report No a
Technical Report No. 71361308a dated 2009-11-17 Client: Manufacturer and / or location of manufacturing: Hartmann Elektronik GmbH Motorstraße 43 70499 Stuttgart see client Unit/s under test (UUT): Test
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationVibration Measurements Vibration Instrumentation. MCE371: Vibrations. Prof. Richter. Department of Mechanical Engineering. Handout 11 Fall 2011
MCE371: Vibrations Prof. Richter Department of Mechanical Engineering Handout 11 Fall 2011 Overview of Vibration Measurements Follow Palm, Sect. pp 425-430 and 559-562. Additional references: Holman, J.P.,
More informationAPR 10 Rev. A
1. Introduction 1.1 Testing was performed on the DDR SODIMM SOCKET 200P to determine if it meets the requirement of Product Specification, 108-78628 1.2 Scope This report covers the electrical, mechanical
More informationTechnical Report No b
Technical Report No. 71361308b dated 2009-11-18 Client: Manufacturer and / or location of manufacturing: Hartmann Elektronik GmbH Motorstraße 43 70499 Stuttgart see client Unit/s under test (UUT): Test
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationPRELIMINARY PRODUCT SPECIFICATION. Part Number Product Description Doc Number
Page 1 PRELIMINARY Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the USB Type C Receptacle range. USB4050, USB4055, USB4060, USB4065. 2.0 PRODUCT NAME AND
More informationConductive Polymer Capacitors
CONDUCTIVE POLYMER CHARACTERISTICS Conductive Polymer Capacitors ITEM CONDITIONS SPECIFICATION Rotational temperature test High-temperature endurance life test Capacitors are placed in an oven with a specific
More informationWIESON TECHNOLOGIES CO., LTD.
TABLE OF CONTENT 1. Scope.... 2 2. Reference Documents. 2 3. Material and Components.... 2 4. Design and Construction.... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements and
More informationPRODUCT SPECIFICATION FOR Micro SIM +Nano SIM/Micro SD (T/F)Card Connector SERIES
Page 1 of 5 1.0 SCOPE This Specification covers Micro SIM +Nano SIM/Micro SD Card Connector SERIES 2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings and other sections of this specification
More informationRF Transformer (Stabilized Matching Device) SMST15 series
1 Features RF Transformer Stabilized Matching Device is RF impedance matching components. You can adjust impedance matching easily between antenna and feeding point, when you use RF Transformer. RF Transformer
More informationTel: Fax: PRODUCT INFORMATION
PRODUCT INFORMATION Part Numbers CEM-OB6027E-354G-PAHC01-00-0 Revision 1-2016 Type Compliance Condenser Microphone RoHS, Lead Free ISO 9001:2000 REACH: SUBSTANCE OF VERY HIGH CONCERN (SVHC) This product
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
More informationDATA SHEET Anti-Sulphur Thick Film Chip Resistor SAS(A/B) Series
DATA SHEET Anti-Sulphur Thick Film Chip Resistor SAS(A/B) Series 0.5% TO 5.0%, TCR -200 TO +400 SIZE: 0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant May 08, 2017 V.4 Page: 2 of 1. SCOPE 1.1 This
More informationSPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000
Sunlord Specifications for Multi-layer Chip Ferrite Bead Page 1 of 16 SPECIFICATIONS Customer Product Name Sunlord Part Number Multi-layer Chip Ferrite Bead G Series Customer Part Number [ New eleased,
More informationConfigurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
More informationDevelopment of Microwave Engine
Development of Microwave Engine IEPC-01-224 Shin SATORI*, Hiroyuki OKAMOTO**, Ted Mitsuteru SUGIKI**, Yoshinori AOKI #, Atsushi NAGATA #, Yasumasa ITO** and Takayoshi KIZAKI # * Hokkaido Institute of Technology
More informationKF Series. -40 to to 100 VDC 0.47 to F
Low Impedance Features Used in communication equipments, switching power supply, industrial measuring instruments, etc. Load life 000~000 Hrs at Safety vent construction design. For detail specifications,
More informationRecommended Testing Method of Aluminum Electrolytic Capacitor
Recommended Testing Method of Aluminum Electrolytic Capacitor Aluminum Electrolytic Capacitor (for LED Products) I. Endurance ) Testing device: Ripple power tester, Thermostatic drier, LCR digital electric
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More informationPRODUCT SPECIFICATION
CONNECTOR CONNECTOR 1 of 6 CONNECTOR 1.0 SCOPE This Product Specification covers the dip type for 13pins slimline SATA receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMER(S)
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationWLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PRODUCT SPECIFICATION 1. SCOPE 1.0mm9(&FPC 2$ This specification covers
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
More informationSize Code .04±.004 (1.1±0.1).063±.004 (1.6±0.1).079±.008 (2.0±0.2) KQ0402. Ceramic Core Electrode KQ0603 KQ ±.008 (2.5±0.
K high inductor features Surface mount Flat top suitable for high speed pick-and-place components Excellent high frequency applications High factors and self-resonant frequency values : Black body color
More informationERB Series. High Frequency Ceramic Capacitors. ERB Product Summary
ERB Product Summary : Exhibiting a capacitance range of 0.5 to 1,000pF, the ERB series of capacitors comes with higher Q and lower ESR which is better than the standard products of equivalent packages.
More informationJun-2012 Rev A
Design Objective 108-57912 01-Jun-2012 Rev A MINI USB CONNECTOR, RECEPTACLE, VERTICAL, DIP, B TYPE 1. SCOPE 1.1. Contents This specification covers the performance, tests and quality requirements for the
More informationTechnical Protocol of the CIPM Key Comparison CCAUV.V-K5
Technical Protocol of the CIPM Key Comparison CCAUV.V-K5 2017-03-06 revised 2018-02-13 (changed schedule) Task and Purpose of the Comparison According to the rules set up by the CIPM MRA the consultative
More informationFlight Demonstration of Electrostatic Thruster Under Micro-Gravity
Flight Demonstration of Electrostatic Thruster Under Micro-Gravity Shin SATORI*, Hiroyuki MAE**, Hiroyuki OKAMOTO**, Ted Mitsuteru SUGIKI**, Yoshinori AOKI # and Atsushi NAGATA # * Hokkaido Institute of
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationWLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More informationThis specification covers the requirements for product performance, test methods and quality assurance provisions of FG Terminal.
DESIGN OBJECTIVES The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore AMP Ltd makes no representation or warranty, express
More informationSpecification LW514. [Preliminary] CUSTOMER SSC. Rev. 00 October Document No. : SSC-QP (Rev.00)
Specification LW514 [Preliminary] Drawn SSC Approval CUSTOMER Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline
More informationNTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
More informationPRODUCT. Part. A1 Micro USB USB3140. Rev. Page. Description Doc USB3140.
1 PREL LIM MI IN AR RY 1.0 SCOPE. This specification covers performance, tests and quality requirements for the Receptacle (Type B, SMT, Vertical)..0 NAME AND PART NUMBER. Receptacle, 5 Pins, SMT, Type
More informationEM ELECTRET CONDENSER MICROPHONE
Sensitivity Symbol: S Unit: db Condition: 0dB=V/Pa at khz Limits: Min: -43 Center: -40 Max: 7 Output impedance Symbol: Z out Unit: KΩ Condition: f=khz Limits: Max: 2.2 Product No: EM-405LRNW-40C Current
More informationACX Advanced Ceramic X
DP 1608 Series Multilayer Chip Diplexers Features Monolithic structure including one low-pass and one band-pass filters with loss pole at adjacent passband. RoHS compliant ACX Applications Dual-band /
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationCustomer Approval Sheet
Customer Approval Sheet Product: 3014 White SMD LED Part Number: PT30A02 V0 (5600K) Customer: Issue Date: 2011/01/03 Feature High brightness Top view LED Dice Technology : InGaN Small package outline (LxWxH)
More informationEpoxy-coated Solid Electrolytic Tantalum Capacitors (LEAD FREE) TCR Series (LEAD FREE)
1. Scope This specification applies to. 2. Product identification T C R S 1 (1) (2) (3) (4) (5) (6) (7) Part no. Designation: (1) series: TCR represent series number of epoxy-coated solid electrolytic
More informationReference Only. Spec. No. JENF243G 0004G-01 P 1 / 12. Ferrite Bead Inductor BL02/BL03 Series
Spec. No. JENF243G 0004G-01 P 1 / 12 1. Scope Ferrite Bead Inductor B02/B03 Series Reference Specification This reference specification applies Ferrite Bead Inductor (Radial Type). 2. Part Numbering (Ex.)
More informationSPECIFICATION WHITE SIDE VIEW LED. Customer. Approved by Approved by Approved by / / / Supplier. Drawn by Checked by Approved by / / /
SPECIFICATION ITEM MODEL WHITE SIDE VIEW LED CUSTOMER Customer Approved by Approved by Approved by / / / Supplier Drawn by Checked by Approved by / / / Contents 1. Features 2. Applications 3. Absolute
More informationSERIAL ATA POWER CONNECTOR 1.27 mm PITCH
: 1.27 mm PITCH TBLE OF CONTENTS 1.0 SCOPE 2.0 PPLICBLE DOCUMENTS 3.0 MTERIL SPECIFICTIONS 3.1 DESIGN ND CONSTRUCTION 3.2 MTERILS 4.0 PERFORMNCE ND TEST 5.0 TEST REQUIREMENTS ND PROCEDURES SHT 1 2 3 4
More informationOptimized PSD Envelope for Nonstationary Vibration Revision A
ACCEL (G) Optimized PSD Envelope for Nonstationary Vibration Revision A By Tom Irvine Email: tom@vibrationdata.com July, 014 10 FLIGHT ACCELEROMETER DATA - SUBORBITAL LAUNCH VEHICLE 5 0-5 -10-5 0 5 10
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationPRODUCT SPECIFICATION
1 of 10 H 1.0 GENERAL THIS SPECIFICATION COVERS.039 INCHES VERTICAL DDR II SOCKETS WITH BLANKED / FORMED CONTACT DESIGNED FOR PRINTED WIRING BOARD TO DUAL IN-LINE MEMORY MODULE INTERCONNECTION. IN ALL
More informationMAG.LAYERS G M L B A - N 8
APPLIICATIION GMLB chip beads can be used in a variety of electronic applications including: Computers and Computer Peripherals Cellular Communication Equipment Digital Cameras Digital Televisions Audio
More informationSpecification LR530 SSC CUSTOMER. Rev. 07 January acriche.com. Document No. : SSC-QP (Rev.00)
Specification LR530 Drawn SSC Approval CUSTOMER Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationMetallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type
Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability,
More informationMulti-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ODEING CODE BP 3 T T S PODUCT CODE BF : For General Signal Lines BP : For Power Lines BH : For High Speed Signal Lines (1MHz~) BS : For Higher Speed Signal Lines (MHz~) DIMENSION
More informationACX Advanced Ceramic X
LF 1608 Series Multilayer Chip Low-Pass Filters ACX Features Monolithic structure replacing one inductor and three capacitors. Applications 0.8-6GHz wireless communication systems, including DECT / PACS
More informationMetal Oxide Varistor:TVM-G Series
Features 1. RoHS compliant 2. Low clamping voltage 3. EIA size 0402, 0603, 0805 4. Working voltage: 5.5 ~ 30 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
More informationSpecification LR521. Drawn Approval Approval. Rev. 05 December 서식번호 : SSC-QP (Rev.00)
Specification LR521 SSC Customer Drawn Approval Approval 1. Features Contents 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color &
More informationThe Ordering Code for various standard model Recorders with an AC supply and without any additional options are as follows:
The basic PC software is supplied free with the recorder. There is an additional charge for the extensive Data Acquisition Software supplied with communication of RS-232/422/485 or Ethernet. The Ordering
More informationSpecification LW514. Drawn Approval Approval. Rev. 02 December 서식번호 : SSC-QP (Rev.00)
Specification LW514 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/16/2016 1/12 GmbH www.freltec.com SPECIFICATION Part Number 19C 03 * 151 * A50 D * Q * T04 _ Type Size Impedance Rated Current Material Toler ance Packing
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationApproval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationSpecification LY530. Drawn Approval Approval. Rev. 08 December 서식번호 : SSC-QP (Rev.00)
Specification LY530 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationWLPN Series Shielded SMD Power Inductors
WLPN202012 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN202012 Series_V2.0 Sep. 2014 Features 1. Close magnetic loop with
More informationSpecification LR530. Drawn Approval Approval. Rev. 08 December Document No. : SSC-QP (Rev.00)
Specification LR530 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 4012X - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationDATASHEET AMOTECH. Application
AMOTECH Co., Ltd. Document Datasheet Type Dielectric Chip Antenna Application.4GHz/5GHz Part No. AMAN0005ST06 Revision 0.0 DATASHEET Application WLAN Dual-band(.4GHz/5GHz) Features PIFA structure Size
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More informationACX Advanced Ceramic X
LF 2012 Series Multilayer Chip Low-Pass Filters Features Monolithic structure replacing two inductors and five capacitors. RoHS compliant Applications 0.8-6GHz wireless communication systems, including
More informationSpecification LW520A
Specification LW520A SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationApproval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationESL. Frequency ESR. Geometry AEC-Q200 IEC Capacitors. Insulation Current. Vibration. Temperatur Change Environmental Testing
Qualification of DC-Link Capacitors for Automotive Use General Requirements, Test Conditions and Tests IEC 60068-1 Insulation Current Vibration ESL Component Capacitors Frequency Temperatur Change Environmental
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationEDCON-COMPONENTS DATA SHEET. MLCC Chip Capacitor Size 2225 Serie: I X7R= X7R Material 100= 10Volt 102= 1000pf. Material: Voltage: Range:
DATA SHEET Serie: Mat. Code X7R Voltage Code 100 Range Code 102 Material: Voltage: Range: X7R= X7R Material 100= 10Volt 102= 1000pf Serie No.: APPD: Schumi FINISH Jamy Sheet No. 1 from 14 Customer: Structure
More informationMULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
More informationACX Advanced Ceramic X
BF 1608 Series Multilayer Chip Band-Pass Filters Features Ultra small SMD type with low loss at passband and high attenuation at stop-band. ACX Applications 0.8 ~ 6 GHz wireless communication systems,
More informationDDR4 SODIMM Socket 0.5mm Pitch 260Pos
1. Introduction 1.1 Testing was performed on DDR4 SODIMM SOCKET 260P to determine if it meets the requirement of Product Specification, 108-115122 Rev.A. 1.2 Scope This report covers the electrical, mechanical
More informationPERFORMANCE TEST REPORT. Rendered to: VELUX AMERICA, INC. PRODUCT: SUN TUNNEL Domes TYPES: Acrylic and Polycarbonate
PERFORMANCE TEST REPORT Rendered to: VELUX AMERICA, INC. PRODUCT: SUN TUNNEL Domes TYPES: Acrylic and Polycarbonate Report No.: E3490.01-106-31 Report Date: 07/13/15 Test Record Retention Date: 06/18/19
More informationShielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
More informationMetallized polypropylene film AC motor capacitor
Datasheet ENGLISH Metallized polypropylene film AC motor capacitor RS Product List: Item Description 843-2014 Motor cap 4uF AMP187 843-2020 Motor cap 2.5uF 350V tinned wire 3.8mm 843-2023 Motor cap 3uF
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More informationSPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-22 DATE July 23, 2013 WISOL. Hong, Seong-Su. User WISOL CO., LTD.
SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. SEMCO PART No. DOC. No. DATE July 23, 2013 REVISION Preliminary WISOL Kim, Kyung-Sik Hong, Seong-Su Jeon. Hyeon Cheol ISSUED BY APPROVED BY
More informationChip tantalum capacitors (Fail-safe open structure type)
TCFG1C6M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions
More information