Taping, Labeling, Packing, Storage and Coding Taiwan Semiconductor

Transcription

1 1 Taping 1.1 Order Information, Related Packing Units, Tape and Reel Size and Labeling 1.2 Shape of Reel and Dimensions 1.3 Leader and Trailer Dimensions 1.4 Cover Tape Peel Strength Tape Dimensions 2 Labeling 2.1 Barcode Label (Code 128) 3 Packing 3.1 Final Packing 3.2 Moisture Proof Packing / MSL 3.3 Pb Free 4 Storage 4.1 Storage Recommendations 4.2 ESD Precaution 5 Product Coding Taping, Labeling, Packing, Storage and Coding Page 1 of 15

2 1. Taping 1.1 Order Information, Related Tape, Box and Reel Size REEL PACKING Outline (Package) Green Tape Tape Reel AEC-Q101 Reel Size Reel Packing code compound size Figure Figure Qualified (inch) Material code (mm) No. No. TS-1 Prefix "H" R0 Suffix "G" Paper T001 R001 A-405 Prefix "H" R0 Suffix "G" Paper T001 R001 DO-41 Prefix "H" R0 Suffix "G" Paper T001 R001 DO-41 Prefix "H" R1 Suffix "G" Paper T001 R001 DO-15 Prefix "H" R0 Suffix "G" Paper T001 R001 DO-201 Prefix "H" R0 Suffix "G" Paper T001 R001 DO-201AD Prefix "H" R0 Suffix "G" Paper T001 R001 R-6 Prefix "H" R0 Suffix "G" Paper T001 R001 Mirco SMA Prefix "H" RS Suffix "G" 8 7 Plastic T003 R002 Sub SMA Prefix "H" RU Suffix "G" 8 7 Plastic T002 R002 Sub SMA Prefix "H" RV Suffix "G" 8 7 Plastic T002 R002 Sub SMA Prefix "H" RT Suffix "G" 8 13 Paper T002 R003 Sub SMA Prefix "H" MT Suffix "G" 8 13 Plastic T002 R003 Sub SMA Prefix "H" RQ Suffix "G" 8 13 Paper T002 R003 Sub SMA Prefix "H" MQ Suffix "G" 8 13 Plastic T002 R003 Sub SMA Prefix "H" R3 Suffix "G" 12 7 Plastic T002 R002 Sub SMA Prefix "H" RF Suffix "G" 12 7 Plastic T002 R002 Sub SMA Prefix "H" R2 Suffix "G" Paper T002 R003 Sub SMA Prefix "H" M2 Suffix "G" Plastic T002 R003 Sub SMA Prefix "H" RH Suffix "G" Paper T002 R003 Sub SMA Prefix "H" MH Suffix "G" Plastic T002 R003 SMA Prefix "H" R3 Suffix "G" 12 7 Plastic T002 R002 SMA Prefix "H" M2 Suffix "G" Plastic T002 R003 SMA Prefix "H" R2 Suffix "G" Paper T002 R003 Folded SMA Prefix "H" F3 Suffix "G" 12 7 Plastic T002 R002 Folded SMA Prefix "H" F2 Suffix "G" Paper T002 R003 Folded SMA Prefix "H" F4 Suffix "G" Plastic T002 R003 C SMA Prefix "H" E3 Suffix "G" 12 7 Plastic T002 R002 C SMA Prefix "H" E2 Suffix "G" Plastic T002 R003 SMB Prefix "H" R5 Suffix "G" 12 7 Plastic T003 R002 SMB Prefix "H" R4 Suffix "G" Paper T003 R003 SMB Prefix "H" M4 Suffix "G" Plastic T003 R003 SMC Prefix "H" R7 Suffix "G" 16 7 Plastic T003 R002 SMC Prefix "H" R6 Suffix "G" Paper T003 R003 SMC Prefix "H" M6 Suffix "G" Plastic T003 R003 D2PAK Prefix "H" RN Suffix "G" Paper T004 R003 ABS - RE Suffix "G" 12 7 Plastic T004 R002 ABS - RG Suffix "G" Paper T004 R003 MBS - RC Suffix "G" Paper T004 R003 DBLS - RD Suffix "G" Paper T004 R003 TO-277A(SMPC) - S1 Suffix "G" 12 7 Plastic T003 R002 TO-277A(SMPC) - S2 Suffix "G" Plastic T003 R003 SMPC4.0 - S1 Suffix "G" 12 7 Plastic T003 R002 SMPC4.0 - S2 Suffix "G" Plastic T003 R003 PDFN56 - S3 Suffix "G" 12 7 Plastic T003 R002 PDFN56 - S4 Suffix "G" Plastic T003 R003 AMMO BOX PACKING Outline (Package) AEC-Q101 Qualified Packing code Green compound code Tape size (mm) Box Size (mm) Reel Material Tape Figure No. Reel Figure No. A-405 Panasert/Cathode Up, Prefix "H" P0 Suffix "G" *42*200 Paper T005 B001 A-405 Panasert/Cathode Up, Prefix "H" P1 Suffix "G" *42*200 Paper T005 B001 TS-1 Prefix "H" A1 Suffix "G" *50*92 Paper T001 B001 TS-1 Prefix "H" A0 Suffix "G" *73*97 Paper T001 B001 A-405 Prefix "H" A0 Suffix "G" *73*97 Paper T001 B001 DO-41 Prefix "H" A0 Suffix "G" *73*97 Paper T001 B001 DO-15 Prefix "H" A0 Suffix "G" *73*84 Paper T001 B001 DO-201AD Prefix "H" A0 Suffix "G" *76*67 Paper T001 B001 R-6 Prefix "H" A0 Suffix "G" *78*150 Paper T001 B001 Page 2 of 15

3 1.2.1 Tape and Reel Dimensions AXIAL-LEAD COMPONENT OUTLINE COMPONENT PITCH A + / mm (.02") INNER TAPE PITCH B + / - mm (.059") CUMULATIVE PITCH TOLERANCE A-405/TS-1 A-405/TS-1 DO-41 DO-15 DO-201/DO-201AD 5.0 mm 5.0 mm 5.0 mm 5.0 mm 10.0 mm 26.0mm 52.4mm 52.4mm 52.4mm 52.4mm 2.0mm/20 pitch 2.0mm/10 pitch 2.0mm/10 pitch 2.0mm/10 pitch 2.0mm/10 pitch R-6/P mm 52.4mm 2.0mm/10 pitch Figure No. : T001 Figure No. : R001 ITEM Component alignment Tape width Exposed adhesive Body eccentricity Reel outside diameter Reel inner diameter Feed hole diameter Reel width (Note2) SYMBOL Z T 6.0 ± ± E 0.8 max max I L1 - L2 I 1.0 max max D D ± ± D ± ± W SPECIFICATIONS (m/m) SPECIFICATIONS (inch) 1.2 max max 76.0 ± ± Note: 1. Each component lead shall be sandwiched between tapes for a minimum of 3.2 mm(0.126") 2. The reel width "W" for 26mm taping is 50 ± 1.0m/m (1.97 ± 0.03") Page 3 of 15

4 1.2.2 Shape of Reel and Dimensions SMD 7" Plastic Reel Figure No. : R002 Unit : mm Reel Tape A B C D E G N Case Size Size ±2 ±0.4 (+0.5;-0.2) ±0.4 ±0.1 (+0.8;-0) ±1.0 8 Sub SMA 8.2 SMA/SMB/ 7" Plastic Reel 12 MBS/ABS/ Sub SMA SMPC/SMPC4.0 PDFN DIP/SMC 16.2 Page 4 of 15

5 1.2.3 Shape of Reel and Dimensions 13" Paper / Plastic Reel Figure No. : R003 Unit : mm Reel Tape A B C D N G T Case Size Size max ±0.5 ±0.5 min ±0.5 (+2.0;-0) max 8 Sub SMA SMA/SMB/ 13" 12 MBS/ABS/ Paper Reel Sub SMA 16 DIP/SMC D2PAK Reel Tape A B C N G Case Size Size ±0.5 (+0.3;-0) (+0.3;-0) ±0.3 ±0.4 SMA/SMB/ 13" MBS/ABS/ Plastic Reel 12mm Sub SMA SMPC/SMPC PDFN56 Page 5 of 15

6 1.3 Leader and Trailer Dimensions Taping, Labeling, Packing, Storage and Coding Trailer Leader no devices devices no devices End Start Y pcs empty X pcs empty Package Sub SMA SMA SMB SMC DBL/DBLS ABS D2PAK X Y Cover Tape Peel Strength According to IEC Peel Strength: 0.1 N to 1.3 N (300 ± 10 %) mm/min 165 TO 180 peel angle IEC Packing of components for automatic handling IEC : Tape packing of components with axial leads on continuous tapes IEC : Tape packing of components with unidirectional leads on continuous tapes IEC : Packing of surface mount components on continuous pressed carrier tapes IEC : Stick magazines for electronic components encapsulated in packages of form E and G IEC : Matrix trays IEC : Bulk case packaging for surface mounting components Page 6 of 15

7 Tape Dimensions.1 PANASERT AND AVISERT (AVAILABLE FOR A-405 PACKAGE ONLY) PANASERT Figure No. : T005 * ALL DIMENSTION IN MILLIMETERS AND (INCH) * STANDARD POLARITY CATHODE ORIENTED AWAY FROM SPROCKET HOLE (OPTIONAL POLARITY CATHODE ORIENTED TOWARD SPROCKET HOLES) PACKING METHOD CODE P/N - AB A - N : PANASERT B - 0 : INSULATION COATING / LEAD FIRST OUT / CATHODE UP / IN REEL 1 : INSULATION COATING / BODY FIRST OUT / CATHODE UP / IN REEL 2 : INSULATION COATING - LEAD FIRST OUT / CATHODE DOWN / IN REEL 3 : INSULATION COATING -- BODY FIRST OUT / CATHODE DOWN / IN REEL Page 7 of 15

8 .2 Box Dimensions AMMO Packaging 26mm Horizontal Ammo Pack 52mm Horizontal Ammo Pack Available Product TS-1 TS-1, DO-41 DO-15 DO-201 DO-201AD Dimension "A" 9.9"(252mm) 10"(253mm) 10"(253mm) 9.9"(251mm) Dimension "B" 1.9"(50mm) 2.8"(73mm) 2.8"(73mm) 3.0"(76mm) Dimension "C" 3.6"(92mm) 3.8"(97mm) 3.3"(84mm) Quantity Box 3K 3K K 2.6"(67mm) 0.5K Figure No. : B001 Panasert with Ammo Pack Page 8 of 15

9 .3 SMD Sub SMA/SMA User Direction of Feed Figure No. : T002 Mirco-SMA/SMB/SMC/SMPC/SMPC4.0 PDFN56 Figure No. : T003 ABS/MBS/DBLS/D2PAK Figure No. : T004 Page 9 of 15

10 .3 SMD EMBOSSED TAPE ALL DIMENSION IN MILLIMETERS AND (INCHES) TAPE SIZE D E P0 t MAX. A0/B0/K0 P2 8mm 12mm 16mm 5±0.05 (0.061±0.002) 1.75±0.10 (0.069±0.004) 4.0±0.10 (0.157±0.004) (0.015) NOTE 1) 2±0.10 (0.079±0.004) CONSTANT DIMENSIONS PRODUCT TYPE Mirco-SMA Sub SMA Sub SMA SMA SMB SMPC/ SMPC4.0 PDFN56 ABS MBS SMC DBLS D 2 PAK EMBOSSED TAPE TAPE SIZE 8mm 12mm 16mm 24mm D1 MIN 0.95 (0.037) 0.95 (0.037) 0.95 (0.037) 1.4 (0.055) F 3.5±0.05 (0.138±0.002) 3.5±0.05 (0.138±0.002) 5.5±0.05 (0.215±0.002) 5.5±0.05 (0.215±0.002) 5.5±0.05 (0.215±0.002) 5.5±0.05 (0.217±0.002) 5.5±0.05 (0.217±0.002) 5.5±0.05 (0.215±0.002) 5.5±0.05 (0.215±0.002) 7.5±0.10 (0.295±0.004) 7.5±0.10 (0.295±0.004) 1±0.10 (0.453±0.004) ALL DIMENSION IN MILLIMETERS AND (INCHES) K MAX 1 (0.039) 2 (0.060) 2 (0.060) 2.46 (0.097) 2.77 (0.109) 1.6 (0.062) 6.75 (0.266) 3.05 (0.120) 2.64 (0.104) 3.91 (0.154) 5.31 (0.209) W , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) , -0.1 ( , ) P 4.0±0.10 (0.157±0.004) 4.0±0.10 (0.157±0.004) 4.0±0.10 (0.157±0.004) 4.0±0.10 (0.157±0.004) 8.0±0.10 (0.315±0.004) 8.0±0.10 (0.315±0.004) 8.0±0.10 (0.315±0.004) 8.0±0.10 (0.315±0.004) 8.0±0.10 (0.315±0.004) 8.0±0.10 (0.315±0.004) 12.0±0.10 (0.472±0.004) 16.0±0.10 (0.630±0.004) VARIABLE DIMENSIONS NOTE 1) A0,B0,K0 are determined by component size. The clearance between the component and the cavity must be within 0.05mm(.002")min. to 0.65mm(.025")max. for 12mm tape, 0.05mm(.002")min to 0.90mm(.035")max. for 16mm tape. In addition, the components cannot rotate more than 20 within the determined cavity. Page 10 of 15

11 2. Labeling 2.1 Barcode Label (Code 128) Label on 7" reel (Size : 75*40 mm) TSC Logo & Name TSC 22 digits product code Part Lot No. TSC Part No. "H" : AEC-Q101 Qualified Customer Part No. Quantity Date code RoHS compliance & MSL Level UL Factory code (1T), (1P), (P), (M), (Q), (10D), (K) : Identify code "G" : Halogen-free "G" : Halogen-free (1T), (1P), (P), (M), (Q), (10D), (K) : Identify code Label on 13" reel/ Inner box (Size : 100*65 mm) "H" : AEC-Q101 Qualified "G" : Halogen-free Page 11 of 15

12 2.1.2 Label on Carton (Size : 120*70 mm) TSC Logo & Name TSC 22 digits product code Part Lot No. TSC Part No. Customer Part No. MO No. RoHS compliance & MSL Level Quantity Date code PO No. Net Weight & Gross Weight "H" : AEC-Q101 Qualified (1T), (1P), (P), (M), (Q), (10D), (K) : Identify code "G" : Halogen-free Other special label format please refer to document: 1. HQ3QC14_Barcode Label Drawing Specification_PMD 2. HQ3QC13_Barcode Label Drawing Specification_SSD Labeling Reel Carton Barcode Label Box Micro SMA/Sub SMA/C-SMA/Folded SMA/SMA SMB/SMC/SMPC/D2PAK/DBLS TO-220/ITO-220/TO-3P/D2PAK/D3K/DBL/DBLS GBL/GBUGBPC/TS4B/TS4K/TS-6P/KBL/KBJL KBP/KBU/AR/ARS Bar code Label Page 12 of 15

13 3 Packing 3.1 Final Packing The reel is packed into a cardboard box. Cardboard box is used for shipping purposes, with the following sizes, slightly different for different production locations, see the following tables. Size, Length x Width x Heigth Quantity of Boxes Size, Length x Width x Heigth Quantity of Boxes mm x mm x mm mm x mm x mm 580x275x x360x x275x x360x x340x x360x x258x x340x x216x x340x x255x x255x x204x x204x x195x x340x x240x x340x x340x Moisture Proof Packing The reel with the taped components is packed in box to protect the devices from absorbing moisture during transportation and storage. This box finally is packed in a cardboard box. On the reel are the bar code product label and taping label and a ESD letterpress. For SMD package, MSL level indetify in label. 3.3 Pb-free information is part of the box. Page 13 of 15

14 4. Storage 4.1 Storage Recommendations We recommend to storage our products in a closed place in normal conditions of temperature and relative humidity: Temperature: 5ºC to 40ºC (Recommended 20ºC to 30ºC) Humidity: 30% to 80% RH (Recommended 40% to 60% RH) As all electronic components, they have to be preserved from corrosive and wet environments to prevent oxidations on the leads of components that could affect to solderability. In general, we suggest to storage the products no more than two years. In case some product is older than that, we recommend to test the solderability of components before assembling them. The other characteristics and reliability of the devices are not restricted to this storage period limitation. 4.2 ESD Precaution Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when these are removed from the antistatic shielding carrier. Electro-static sensitive devices - warning letterpress are show on the reel. Page 14 of 15

15 5. Product Coding ( 22 Digits ) 21~22 : House No. 13 ~ 20 : PN 12 : Logo identifier 9~ 11 : Packing Code 8 : Division (PRD/SSD/PMD) 6 ~ 7 : Wafer Code (SKY/Zener/ ) 5 : " 一 "(Fixed) 1 ~ 4 : Package (DO-14/ SMA/.) Page 15 of 15