Institute for Nanomaterials, Advanced Technologies and Innovation Liberec 1 tel.: cxi.tul.cz
|
|
- Sandra Gardner
- 5 years ago
- Views:
Transcription
1 Institute for Nanomaterials, Advanced Technologies and Innovation where NANOSPIDER TM was born Liberec 1 tel.: cxi.tul.cz
2 Agenda Introduction Research Programs o Material Research (MR) o Competitive Engineering (CE) Offer of Contractual Research Our Partners Contact Institute for Nanomaterials, Advanced Technologies and Innovation
3 Focus and Financing The Center is focused on preparation and application of new materials, mainly nanomaterials and advanced industrial designs and technologies. The project is financed from European fund for regional development (ERDF) and a state budget of the Czech Republic through Operational program: Research and Development for innovation (VaVpl). Controlling body OP VaVpl is Ministry of Education, youth and sports. Project exists under the Institute for nanomaterials, Advanced Technologies and Innovation (CxI), since February Institute for Nanomaterials, Advanced Technologies and Innovation
4 People at CxI People from faculties (FM, FT, FME,)+ new employees More than180 people are working on the premises of CxI 145 staff of CxI structure: senizor scientist and researcher (50 employees), young scientist, junior researcher (61 employees) technician/laboratory worker (34 employees). Institute for Nanomaterials, Advanced Technologies and Innovation
5 Equipment and Machinery 100 devices for > 250 mil. (10mil ) SEM high resolution ~ 1 nm, chemical analysis (EDS, WDS) microstructural technique (EBSD) 3D printers AFM microscope CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE CZ.1.05/2.1.00/
6 Research Programs Institute for nanomaterials, advanced technologies and innovation has ambitions to become state of the art research center for development and innovation in these areas: Material research focusing on research, development, processing and applications of progressive materials, especially nanomaterials Competitive engineering focusing on research, development and utilization of advanced engineering constructions and technologies, in particular mechatronic systems, propulsion units and other components of machines and vehicles and progressive methods for the processing of new materials CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE CZ.1.05/2.1.00/
7 Head of the research program: doc. Ing. Stanislav Petrík, CSc. tel.: Orientation of the research program: processing and utilization of new progressive materials (in particular nanomaterials) Material Research Basic research activities: electrostatic spinning, preparation of various types of nano-surface treatments and nanomaterial composites. Applied research: examining the properties of nanomaterials and their usability in specific applications, for example development of filters, surface treatments in medicine and engineering, biotechnological and chemical nanomaterials for water treatment etc. CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE CZ.1.05/2.1.00/
8 Laboratories of Material Research Department of Nanostructure Preparation and Analysis Department of Physical Measurements Department of Nanomaterials in Natural Science Department of Nanotechnology and Informatics Laboratory of Nanolayer Evaluation Laboratory of Nanocomposite Materials Laboratory of Analytical Methods Laboratory of Fluid Mechanics Laboratory of Sample Production and Product Prototypes Laboratory of Chemical Remediation Processes Physico-chemical Laboratory of Nanomaterials Laboratory of Biotechnology Laboratory of Nanomaterial Applications doc. Ing. Stanislav Petrík, CSc. prof. Ing. Václav Kopecký, CSc. prof. Ing. Miroslav Černík, CSc prof. Dr. Ing. Jiří Maryška, CSc. CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE CZ.1.05/2.1.00/
9 Department of Preparation and Analysis of Nanostructures Laboratories: Laboratory of nanolayer evaluation Laboratory of nanocomposite materials Laboratory of analytical methods Aims: Development of thin layers, nanocomposites, modification of polymer materials using plasmatic methods Equipments: SEM, AFM, Radio Frequency Plasma Assisted Chemical Vapour Deposition, nano-mill Contact: doc. Ing. Stanislav Petrík, CSc.
10 Department of Physical Measurements Laboratories: Laboratory of fluid mechanics Laboratory of sample production and product prototypes Aims: Measurement of physical properties during the technological processes, Automatisation of technical processes, Non contact measurements based on optical systems, Software developement Equipments: Time Resolved PIV, micropiv, process tomography, Flir thermal camera for precise measurement of surface temperatures, portable X-ray structure anylyzer Contact: prof. Ing. Václav Kopecký, CSc.
11 Department of Nanotechnology and Informatics Laboratories: Laboratory of nanomaterial applications Aims: Technologies for the nanofibrous materials preparation and functionalization (filtration, catalysis, barrier systems) Equipments: Porozimeter, Instrument for measuring HEPA filters, Instrument for measuring particle size, Portable X-ray fluorescence analyzer Contact: prof. Dr. Ing. Jiří Maryška, CSc.
12 Department of Nanomaterials in Natural Science Laboratories: Laboratory of chemical remediation Laboratory of biotechnology Physico-chemical laboratory of nanomaterials Aims: application of new methods for water treatment and remediation, the application of nanomaterials in remediation technologies and study of the potential hazards of nanomaterials. Equipments: GC/MS, HPLC, ICP/MS, zeta-sizer, UV-VIS, genomic sequencing, Contact: Prof. Dr. Ing. Miroslav Černík, CSc.
13 head of the research program> prof. Ing. Jaroslav Beran, CSc. tel.: Orientation of the research program: Competitive Engineering - sophisticated structures of production machines and robots with mechatronic systems, - new propulsion units for machines and mobile equipment, - development and optimization of safe engineering constructions, - progressive technologies for the processing of technical materials. Research and development focused on the manufacturing and automobile industries with large application potential. CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE CZ.1.05/2.1.00/
14 Laboratories of Competitive Engineering Department of Machinery Construction Laboratory of Nanofiber and Nanosurface Preparation Laboratory of Innovative Textile Machinery Laboratory of Hydrodynamics Laboratory of Mechanics Ing. Michal Petrů, Ph. D.. Department of Vehicles and Engines Department of Industrial Technology Department of Robotic Systems and Mechatronic Systems Laboratory of Propulsion Units Laboratory of Advanced Industrial Technologies Laboratory of Particle Technologies and Processes Laboratory of Prototype Technologies and Processes Laboratory of Robotic Systems Laboratory of Controlled Electric Drives and Servomechanisms Ing. Robert Voženílek, Ph. D.. Ing. Jiří Bobek, Ph. D. doc. Ing. František Novotný, CSc. CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE CZ.1.05/2.1.00/
15 Department of Machinery Constructions Laboratories: Laboratory of nanofiber and nanosurface preparation Laboratory of innovative textile machinery Aims: Development of new nonwoven and nanofiber materials, theoretical research on the production and properties of nanofiber materials, new machines and equipment for fiber and nanofiber structures Equipment: Lab. unit for nanofibers, high speed, thermographic cameras Contact: Ing. Michal Petrů, Ph. D.
16 Department of Machinery Constructions Laboratories: Laboratory of hydrodynamics Laboratory of mechanics Aims: Active and passive vibration isolation systems, measurement of noise and vibration (of vehicle components), measurement of kinematic variables, deformation, strain, force effects, etc. using the appropriate detectors, sensors and measuring chains Equipment: Climate chamber, platform with 6 degrees of freedom hexapod, 25 tons shredder, vibration device Contact: Ing. Michal Petrů, Ph. D.
17 Department of Vehicles and Engines Laboratories: Laboratory of propulsion units Aims: Research and development of ecological propulsion units with optimized transmission and energy conversion for transport, mobile machinery and energy equipment Equipment: Powertrain test bed, FTIR spectrometer, emission roller dynamometer, VISIOSCOPE and an INDIMETER instrument for measuring dynamic combustion pressure Contact: Ing. Robert Voženílek, Ph. D.
18 Department of Industrial Technologies Laboratories: Lab. of advanced industrial technol. Laboratory of particle technologies and processes Aims: non-chip-producing technologies for processing plastics, composites, metals and nonferrous metals, evaluation of cutting forces, material removal, temperature, deformation Equipment: injection molding machine for Powder injection molding (PIM), furnaces for PIM technology, mobile diffractometer, X-ray diffraction system with surface radiation detection Contact: Ing. Jiří Bobek, Ph. D
19 Department of Industrial Technologies Laboratories: Laboratory of prototype technologies and processes Aims: Implementation of advanced technologies into the development of products and equipment, development of products and equipment with the application of new procedures and methods Equipment: 3D printer -first printing with two-component materials, LAO fiber laser with an output of 400 W and a laser cutting head, Contact: Ing. Jiří Bobek, Ph. D.
20 Department of Robotic and Mechatronic Systems Laboratories: Laboratory of robotic systems Laboratory of controlled electric drivers and servomechanisms Aims: Solutions for specific design nodes of industrial robots, implementation of elements with a high degree of intelligence and new materials in robotic systems, Equipment: Robot with double gripper for handling hot utility glass, development of advanced technologies in the field of automation technology, electrical engineering, and robotics Contact: doc. Ing. František Novotný, CSc.
21 Types of cooperation Exclusive relations Non-exclusive relations Individual short-term contracts Long-term collaboration (framework agreement, collaboration agreement) series of subsequent contracts Partnership within grant projects Applied research and development Basic / searching research Association )
22 National and international grants DZS; GESHER/MOST; 473 A structure of incomes in indicator (mil) reality (mil) 215 (USA); 455 MPO TIP; CZ - VES14; , , , : 42 projects recieved 80 mil. CZK / Large-scale Integrating Collaborative projects; : 75 projects recieved 215 mil. CZK 2015: 60 projects recieved 155 mil. CZK Ministerstvo vnitra; 925 seed; 25773, projekt; VES13 PROGRAMU INGO II; RP; CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE CZ.1.05/2.1.00/
23 Contract Research 1,6 1,4 Contract research in mil. EUR 1,48 1,2 1, ,904 0,8 0,6 0,643 0,754 prediction reality 0,4 0,397 0,358 0,2 0 0,174 0,1374 0,048 0,
24 Environmental friendly nano- and bio-technologies in water and soil remediation 2 uni + AS CR + 6 industrial partners TUL, UPOL, MBU, AQUATEST, GEOtest, DEKONTA, MEGA, AECOM CZ, LAC Aim: INCREASE OF COMPETIVENESS of the CR in water and soil treatment technologies and related fields including nano-, bio- and envi- technologies providing enormous market opportunities
25 Ing. Tomáš Martinec, PhD. tel.: Example of Commercial Solution Synthetic leather technology We cooperate with company Magna on development of a new type of machine for production of synthetic leather, using technology Slush Molding. Basic principle of this technology is heating up of a form to desired temperature and application of a material in a state of powder. Advantages of the new device: To heat up the form only infrared emitters are used. This leads to considerable savings in energy and significantly shorter time of the cycle Possibility of local manipulation of temperature. Controlled local changes in thickness (for example in the area of airbag), not being offered by anyone on the market. CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE CZ.1.05/2.1.00/
26 Liberec 1 tel.: cxi@tul.cz cxi.tul.cz Research on the Top
Institute for Nanomaterials, Advanced Technologies and Innovation
Institute for Nanomaterials, Advanced Technologies and Innovation Adam Blazek Industry Relations Director where NANOSPIDER was born TM Studentská 1402/2 461 17 Liberec 1 tel.: +420 485 353 006 cxi.tul.cz
More informationOptical Emission Spectroscopy of Diffuse Coplanar Surface Barrier Discharge
WDS'13 Proceedings of Contributed Papers, Part II, 144 148, 2013. ISBN 978-80-7378-251-1 MATFYZPRESS Optical Emission Spectroscopy of Diffuse Coplanar Surface Barrier Discharge Z. Tučeková, 1 A. Zahoranová,
More informationUltrafast Nano Imprint Lithography
Ultrafast Nano Imprint Lithography Imprint in less than 1 sec Logos Anti-counterfeiting nanostructures Miniaturized QRs Customized designs 2 Pulsed-NIL technology enables printing times in less than 100
More informationACTIVE THERMOGRAPHY FOR MATERIALS NON-DESTRUCTIVE TESTING
ACTIVE THERMOGRAPHY FOR MATERIALS NON-DESTRUCTIVE TESTING Michal ŠVANTNER a, Zdeněk VESELÝ b a University of West Bohemia, Univerzitní 8, 30614 Plzeň, msvantne@ntc.zcu.cz b University of West Bohemia,
More informationKAZAN NATIONAL RESEARCH TECHNOLOGICAL UNIVERSITY
KAZAN NATIONAL RESEARCH TECHNOLOGICAL UNIVERSITY Introduction & Collaboration Opportunities А. Belyakov, R. Ilyasov WWW.KNRTU.RU 26.1.12 26.1.12 26.1.12 XXVII WORLD UNIVERSIADE 2013 June 14, 1890 INTEGRATED
More informationTHERMAL PROPERTIES OF SILICON OXIDE NANOFIBERS
THERMAL PROPERTIES OF SILICON OXIDE NANOFIBERS J. Studničková, 1 M. Maršálková, 2 P. Exnar, 3 J. Grabműllerová, 2 J. Műllerová 3 1 Technical University of Liberec, Department of Textile Chemistry; Hálkova
More informationDOUBLE DEGREE MASTER PROGRAM
DOUBLE DEGREE MASTER PROGRAM in Engineering Science/Mechanical Engineering at Warsaw University of Technology and Technical University Berlin (WUT/TUB) I SEMESTER COURSE PROGRAM WUT TUB SUBJECT SUBJECT
More informationInnovation Project Active Force Material. Alexander V. Frolov Russia, 2012
Innovation Project Active Force Material Alexander V. Frolov Russia, 2012 1 Goal Using modern nanoscience surface engineering, it is planned to create new material providing propulsion active force due
More informationRUSSIAN CHEMICAL INDUSTRY
RUSSIAN CHEMICAL INDUSTRY SHARE OF CHEMICAL PRODUCTS IN MANUFACTURING (% OF THE TOTAL VOLUME IN RUBLES)* INDEX OF CHEMICAL PRODUCTION BY VOLUME (% OF THE TOTAL VOLUME IN TONNES)* FIXED INVESTMENTS (% OF
More informationDouble Degree Master Program in Engineering Science (DDMPES) Module Catalogue
Double Degree Master Program in Engineering Science (DDMPES) Module Catalogue The DDMPES shall consist of the following categories: 18 credits advanced mathematical courses 24 credits + project (6 credits)
More informationNational Aeronautics and Space Administration X-RAY THE SCIENCE OF. technology
National Aeronautics and Space Administration X-RAY THE SCIENCE OF technology www.nasa.gov chandra.si.edu/tech BACKGROUND ON X-RAY TECHNOLOGY X-ray astronomy is a relatively new science. It was pioneered
More informationSemester s projects at UTT in Autumn 2011
Project title: Design of special rapid prototyping machine Our laboratory intend to create a new technique for medium to large scale rapid prototyping. This involve the design of new machine allowing to
More informationINITIAL STUDY OF STRUCTURE OF NANOFIBER TEXTILES AND THE CREATIN OF ITS MODEL
INITIAL STUDY OF STRUCTURE OF NANOFIBER TEXTILES AND THE CREATIN OF ITS MODEL HAVRLÍK Michal 1, SVESHNIKOV Alexey 1,2 1 CTU Czech Technical University in Prague, Prague, Czech Republic, EU 2 Institute
More informationMaterials Having a High Degree of Adhesion for Gripping Elements Designing
Applied Mechanics and Materials Online: 2014-08-11 ISSN: 1662-7482, Vol. 613, pp 220-225 doi:10.4028/www.scientific.net/amm.613.220 2014 Trans Tech Publications, Switzerland Materials Having a High Degree
More informationChapter 10. Nanometrology. Oxford University Press All rights reserved.
Chapter 10 Nanometrology Oxford University Press 2013. All rights reserved. 1 Introduction Nanometrology is the science of measurement at the nanoscale level. Figure illustrates where nanoscale stands
More informationThe Fluid Flow in the T-Junction. The Comparison of the Numerical Modeling and Piv Measurement
Available online at www.sciencedirect.com Procedia Engineering 39 (2012 ) 19 27 XIIIth International Scientific and Engineering Conference HERVICON-2011 The Fluid Flow in the T-Junction. The Comparison
More informationNanotechnologies as a key factor in the development of sustainable and cost-effective products. Carla Silva
Nanotechnologies as a key factor in the development of sustainable and cost-effective products Carla Silva csilva@centi.pt Summary Some words about CeNTI Nanocomposites synthesis Nanotechnologies for finishing
More informationQuantum Dots for Advanced Research and Devices
Quantum Dots for Advanced Research and Devices spectral region from 450 to 630 nm Zero-D Perovskite Emit light at 520 nm ABOUT QUANTUM SOLUTIONS QUANTUM SOLUTIONS company is an expert in the synthesis
More informationContents. Foreword by Darrell H. Reneker
Table of Foreword by Darrell H. Reneker Preface page xi xiii 1 Introduction 1 1.1 How big is a nanometer? 1 1.2 What is nanotechnology? 1 1.3 Historical development of nanotechnology 2 1.4 Classification
More informationOverview of Chemical Engineering Research in China Xing-Gui Zhou and Wei-Kang Yuan
Overview of Chemical Engineering Research in China Xing-Gui Zhou and Wei-Kang Yuan State Key Laboratory of Chemical Engineering East China University of Science and Technology Research Organizations Universities
More information6 th International Conference on Trends in Agricultural Engineering 7-9 September 2016, Prague, Czech Republic
DYNAMIC CHARACTERISTICS OF THE KARAKURI TRANSPORT TROLLEY I Mašín 1, T Riegr 2 1 Institute for Nanomaterials, Advanced Technology and Innovation, Technical University in Liberec, Czech Republic 2 Department
More informationTechniques useful in biodegradation tracking and biodegradable polymers characterization
Techniques useful in biodegradation tracking and biodegradable polymers characterization Version 1 Wanda Sikorska and Henryk Janeczek 1 Knowledge on biodegradable polymers structures is essential for the
More informationResearch and Development on European Cleaning Solutions for Radioactive Applications. Clean air solutions
Research and Development on European Cleaning Solutions for Radioactive Applications Dipl. Ing. Axel Mahler, R&D Director Europe, Camfil AB, Sweden 19.03.2014 Your speaker: Axel Mahler, R&D Director Europe
More informationNanotechnology Fabrication Methods.
Nanotechnology Fabrication Methods. 10 / 05 / 2016 1 Summary: 1.Introduction to Nanotechnology:...3 2.Nanotechnology Fabrication Methods:...5 2.1.Top-down Methods:...7 2.2.Bottom-up Methods:...16 3.Conclusions:...19
More informationCarbon Nanotubes: New Markets and Developing Applications July 5, 2007
Carbon Nanotubes: New Markets and Developing Applications July 5, 2007 Presented by Andrew Rich Nanocyl S.A. arich@nanocyl.com US Offices Tel : +1 781 261 9778 Fax : +1 781 261 9769 info@us-nanocyl.com
More informationUse of graphene by an energy utility
Use of graphene by an energy utility ENGIE A global player in the energy business (2015) Power Natural gas Energy services No.1 Independent Power Producer (IPP) in the world. No.1 producer of nonnuclear
More informationMATERIALS CHARACTERIZATION AND TESTING PLATFORM
service offer MATERIALS CHARACTERIZATION AND TESTING PLATFORM Materials Materials Characterization and Testing Platform LIST's Materials Characterization and Testing Platform supports all Luxembourg and
More informationGAS CAMERA MOBILE IMAGING SYSTEM FOR VISUALISING METHANE PLUMES AT DISTANCES BETWEEN 0 M AND 100 M AND MORE
23rd World Gas Conference, Amsterdam 2006 GAS CAMERA MOBILE IMAGING SYSTEM FOR VISUALISING METHANE PLUMES AT DISTANCES BETWEEN 0 M AND 100 M AND MORE Main Author Peter Schwengler, E.ON Ruhrgas AG, Pipelines
More informationMICROSTRUCTURE-BASED PROCESS ENGINEERING AND CATALYSIS
MICROSTRUCTURE-BASED PROCESS ENGINEERING AND CATALYSIS 1 2 APPLICATION PORTFOLIO Fine chemistry We design chemical processes from lab to pilot scale in a safe, efficient and flexible way: using micro-
More informationTAAQI - Advanced Instrumental Techniques of Chemical Analysis
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 714 - ETP - Department of Textile and Paper
More informationHELLA AGLAIA MOBILE VISION GMBH
HELLA AGLAIA MOBILE VISION GMBH DRIVING SOFTWARE INNOVATION H E L L A A g l a i a M o b i l e V i s i o n G m b H I C o m p a n y P r e s e n t a t i o n I D e l h i, A u g u s t 2 0 1 7 11 Hella Aglaia
More informationNanomanufacturing Issues
Nanomanufacturing Issues Ehr Ping Huangfu Industrial Technologies Program U.S. Department of Energy 2008 International Conference on Nanotechnology for the Forest Products Industry Nanotechnology from
More informationNational Academy of Sciences of Ukraine. Athens, 10 April 2008
National Academy of Sciences of Ukraine Athens, 10 April 2008 Proposals of Ukrainian Institutions in Physics Growth technology Fabrication technology Devices & Equipment Characterization and diagnostic
More informationSPRING-BACK PREDICTION FOR STAMPINGS FROM THE THIN STAINLESS SHEETS
SPRING-BACK PREDICTION FOR STAMPINGS FROM THE THIN STAINLESS SHEETS PAVEL SOLFRONK, JIRI SOBOTKA, MICHAELA KOLNEROVA, LUKAS ZUZANEK Technical University of Liberec Faculty of Mechanical Engineering Department
More informationMonitoring the Aggregation of Particles through Raman Spectroscopy
Monitoring the Aggregation of Particles through Raman Spectroscopy Name: Yanxiao Ma Advisor: Dr. Andrew Callender Submission Date: 19 Oct. 2012 Introduction Raman spectroscopy is a spectroscopic technique
More informationFRAUNHOFER INSTITUTE FOR SURFACE ENGINEERING AND THIN FILMS IST ATMOSPHERIC PRESSURE PLASMA PROCESSES
FRAUNHOFER INSTITUTE FOR SURFACE ENGINEERING AND THIN FILMS IST ATMOSPHERIC PRESSURE PLASMA PROCESSES 1 2 ATMOSPHERIC PRESSURE PLASMA PROCESSES AT THE FRAUNHOFER IST Today, atmospheric pressure plasma
More informationInterdepartmentalCenter for Materials Science and Engineering. University of Pisa
InterdepartmentalCenter for Materials Science and Engineering University Some history. On 1989, in the framework of the Engineering Faculty, the Center for Material Engineering (CIIM) was founded, regrouping
More informationSupporting Information s for
Supporting Information s for # Self-assembling of DNA-templated Au Nanoparticles into Nanowires and their enhanced SERS and Catalytic Applications Subrata Kundu* and M. Jayachandran Electrochemical Materials
More informationWall-Slip of Highly Filled Powder Injection Molding Compounds: Effect of Flow Channel Geometry and Roughness
Wall-Slip of Highly Filled Powder Injection Molding Compounds: Effect of Flow Channel Geometry and Roughness Berenika Hausnerovaa,b, Daniel Sanetrnika,b, Gordana Paravanovab a Dept. of Production Engineering,
More informationADVANCED ANALYTICAL LABORATORY
An Information Brochure on ADVANCED ANALYTICAL LABORATORY ANDHRA UNIVERSITY Visakhapatnam - 530 003 Andhra Pradesh, India Sponsored by DEPARTMENT OF SCIENCE & TECHNOLOGY Government of India New Delhi 110016
More informationMEMS Metrology. Prof. Tianhong Cui ME 8254
MEMS Metrology Prof. Tianhong Cui ME 8254 What is metrology? Metrology It is the science of weights and measures Refers primarily to the measurements of length, weight, time, etc. Mensuration- A branch
More informationClark Atlanta University Center for Surface Chemistry and Catalysis Instrument Capabilities
Center for Surface Chemistry and Catalysis Instrument Capabilities For information contact: Dr. Eric Mintz Research Center for Science and Technology Clark Atlanta University Atlanta, Georgia 30314 Phone:
More informationDiscovering The World Of Chemistry
Discovering The World Of Chemistry Dr. Dimitrios Tzalis IMI Open Info Day: Horizon 2020 - Health, demographic change and wellbeing 18th September 2015 Brussel Taros Chemicals GmbH & Co. KG Taros: Stability,
More informationFabrication of micro-optical components in polymer using proton beam micro-machining and modification
Nuclear Instruments and Methods in Physics Research B 210 (2003) 250 255 www.elsevier.com/locate/nimb Fabrication of micro-optical components in polymer using proton beam micro-machining and modification
More informationCourse Description. * LC: Lecture; LB: Laboratory; LL: Lecture/Lab; SM: Seminar; SP: Senior Project; IN: Internship; LI: Lecture/Internship
* : Lecture; LB: Laboratory; LL: Lecture/Lab; SM: Seminar; SP: Senior Project; IN: Internship; LI: Lecture/Internship ** FN: Foundation; UG: Undergraduate; DP: Diploma; : Master; CR: Certificate Course
More informationCURRENT STATUS OF NANOIMPRINT LITHOGRAPHY DEVELOPMENT IN CNMM
U.S. -KOREA Forums on Nanotechnology 1 CURRENT STATUS OF NANOIMPRINT LITHOGRAPHY DEVELOPMENT IN CNMM February 17 th 2005 Eung-Sug Lee,Jun-Ho Jeong Korea Institute of Machinery & Materials U.S. -KOREA Forums
More informationTABLE OF CONTENTS 1 RESEARCH SCOPE AND METHODOLOGY Report scope Market definition Categorization...
TABLE OF CONTENTS 1 RESEARCH SCOPE AND METHODOLOGY... 15 1.1 Report scope... 15 1.2 Market definition... 15 1.2.1 Categorization.... 16 1.3 Research methodology... 17 1.4 Assumptions and limitations...
More informationIn the name of Allah
In the name of Allah Nano chemistry- 4 th stage Lecture No. 1 History of nanotechnology 16-10-2016 Assistance prof. Dr. Luma Majeed Ahmed lumamajeed2013@gmail.com, luma.ahmed@uokerbala.edu.iq Nano chemistry-4
More informationContents. Preface...xv List of Contributors...xvii
Preface...xv List of Contributors...xvii CHAPTER 1 Nanotechnology to Nanomanufacturing... 1 1.1 Introduction...1 1.2 Approaches to Nanotechnology...2 1.3 Transition from Nanotechnology to Nanomanufacturing...3
More informationDesign and production of Scintillation Detectors
Design and production of Scintillation Detectors Components for nuclear radiation detectors Fields of application: * Medicine * Industry * Science * Security Scintillation Detectors : Instruments using
More informationIntroductory Lecture on Plasmas EEG 783. Robert A. Schill, Jr. University of Nevada Las Vegas
Introductory Lecture on Plasmas EEG 783 Robert A. Schill, Jr. University of Nevada Las Vegas States of Matter Four Naturally Occurring States of Matter Solids, Liquids, Gas, Plasmas Solids Condense matter
More informationAM activities at Linköping University (also including lightweight technologies)
AM activities at Linköping University (also including lightweight technologies) Johan Ölvander, PhD Professor in Machine Design Department of Management and Engineering Linköping University Students 27
More information3.30 TITANIUM DIOXIDE
181 3.30 TITANIUM DIOXIDE Technology Prospects Addressable market size 5 Competitive landscape 3 IP landscape 4 Commercial prospects 4 Technology drawbacks 3 Total score (out of max. 25): 19 3.30.1 Properties
More informationCHARACTERIZATION AND FIELD EMISSION PROPERTIES OF FIELDS OF NANOTUBES
CHARACTERIZATION AND FIELD EMISSION PROPERTIES OF FIELDS OF NANOTUBES Martin MAGÁT a, Jan PEKÁREK, Radimír VRBA a Department of microelectronics, The Faculty of Electrical Engineeering and Communication,
More informationCURRICULUM VITAE. Department of Physics (D.P), College of Science (C.S), Sudan University of Science and
CURRICULUM VITAE DATE: July 2016 PERSONAL DATA: NAME: Abd Ellateef Abbass Abd Ellateef Mohammed Khair (AE. Abbass) NATIONALITY: Sudanese GENDER: Male PLACE AND DATE OF BIRTH: Sudan, 02 / May / 1977 LANGUAGES:
More informationEuropean Network of Materials Research Centres NAME : INTERDEPARTMENTAL MATERIALS SCIENCE AND ENGINEERING CENTER (CISIM)
NAME : INTERDEPARTMENTAL MATERIALS SCIENCE AND ENGINEERING CENTER (CISIM) INSTITUTION : UNIVERSITY OF PISA (UNIPI) COUNTRY : ITALY Profile : CISIM is the Interdepartmental Materials Science and Engineering
More informationVALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur
VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203 DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION ENGINEERING QUESTION BANK V SEMESTER EI6501 Analytical Instruments Regulation 2013 Academic
More informationC- Mats and their Applications
C- Mats and their Applications Materials and Electrochemical Research (MER) Corporation Tucson, Arizona Dr. R. O. LOUTFY MER HISTORY g MER is a private Arizona Corporation started in 1985 by Drs. R.O.Loutfy
More informationFTIR INVESTIGATION OF THE AGEING PROCESS OF CARBON NANOWALLS
Romanian Reports in Physics, Vol. 68, No. 3, P. 1108 1114, 2016 FTIR INVESTIGATION OF THE AGEING PROCESS OF CARBON NANOWALLS V. MĂRĂSCU 1, 2,*, S. VIZIREANU 2, S. D. STOICA 2, V. BARNA 1, A. LAZEA- STOYANOVA
More informationYour partner in Science!
Your partner in Science! Your partner in Science! Laser Diffraction Particle Size Distribution Analyzer LA-960 Simple, Powerful, Reliable 10 nm - 5 mm The LA-960 features intuitive software, unique accessories,
More informationMECHANICAL ENGINEERING (ME)
Mechanical Engineering (ME) 1 MECHANICAL ENGINEERING (ME) ME 206. Mechanics II: Dynamics Prerequisite(s): ENGR 102 and CEE 205. Description: Study of motions and forces in engineering systems. Kinematics
More informationResearch Team name: Technology Research Center Laboratory, Selcuk University Presenter name: Prof. Dr. Mustafa Ersoz
Research Team name: Technology Research Center Laboratory, Selcuk University Presenter name: Prof. Dr. Mustafa Ersoz Team Presentation Annual Workshop, COST Action MP1106 Dublin, September, 2012 Research
More informationTHE STRUCTURE AND PROPERTIES OF POLYPROPYLENE- MODIFIED HALLOYSITE NANOCLAY FIBRES
THE STRUCTURE AND PROPERTIES OF POLYPROPYLENE- MODIFIED HALLOYSITE NANOCLAY FIBRES Z. Tomčíková 1, A. Ujhelyiová 2, P. Michlík 1, Š. Krivoš 1 and M. Hricová 2 1 Research Institute for Man-Made Fibres a.s.,
More informationEXPOSURE ASSESSMENT TO NOAA AT WORKPLACE AN OPPORTUNITY TOWARDS A SAFER AND MORE RESPONSIBLE DEVELOPMENT OF NANOCOMPOSITES: NANOLEAP PROJECT
EXPOSURE ASSESSMENT TO NOAA AT WORKPLACE AN OPPORTUNITY TOWARDS A SAFER AND MORE RESPONSIBLE DEVELOPMENT OF NANOCOMPOSITES: NANOLEAP PROJECT Cécile DUCROS 8 novembre 2016 Univ. Grenoble Alpes, CEA Tech
More informationinstruments anasys Nanoscale Thermal Analysis Craig Prater, CTO Research Challenges for Nanomanufacturing Systems Februay th, 2008
Nanoscale Thermal Analysis Craig Prater, CTO Research Challenges for Nanomanufacturing Systems Februay 11-12 th, 2008 Motivations Nanomanufacturing needs characterization for research, product development
More informationThe Green. Chemistry Checklist Why Green Chemistry? The Business Case. Inside. Support and Communication. Design and Innovation
The Green Chemistry Checklist Green Chemistry and Safer Products Business Commitment, v.1.0 Why Green Chemistry? The Business Case Inside Why Use the Green Chemistry Checklist page 2 The Checklist: Green
More informationWorkshop II Nanomaterials Surfaces and Layers Commercialising Carbon Nanotubes
Workshop II Nanomaterials Surfaces and Layers Commercialising Carbon Nanotubes Harry Swan, Carbon Nanomaterials Business Manager, Thomas Swan & Co. Ltd. Introduction Thomas Swan & Co. Ltd. Carbon Nanotubes
More informationThe laboratory at CE PoliMaT. a meeting point of. industrial-technological. experience, R&D. knowledge, and. high-level equipment.
R&D Equipment at the PoliMaT Center of Excellence The laboratory at CE PoliMaT The laboratory at CE PoliMaT represents a meeting point of industrial-technological experience, R&D knowledge, and high-level
More informationA New Dielectrophoretic Coating Process for Depositing Thin Uniform Coatings on Films and Fibrous Surfaces
A New Dielectrophoretic Coating Process for Depositing Thin Uniform Coatings on Films and Fibrous Surfaces by Angelo Yializis Ph.D., Xin Dai Ph.D. Sigma Technologies International Tucson, AZ USA SIGMA
More informationOptoelectronic Characterization of Nanostructures
Optoelectronic Characterization of Nanostructures Aims of Research Improvement of diagnostic methods used for testing semiconductor materials and electronic components and structures. Determination of
More informationDamage to Molecular Solids Irradiated by X-ray Laser Beam
WDS'11 Proceedings of Contributed Papers, Part II, 247 251, 2011. ISBN 978-80-7378-185-9 MATFYZPRESS Damage to Molecular Solids Irradiated by X-ray Laser Beam T. Burian, V. Hájková, J. Chalupský, L. Juha,
More informationParameters of Plasma Generated by Diffuse Coplanar Surface Barrier Discharge Used for Inactivation of Escherichia Coli
WDS'15 Proceedings of Contributed Papers Physics, 187 191, 2015. ISBN 978-80-7378-311-2 MAFYZPRESS Parameters of Plasma Generated by Diffuse Coplanar Surface Barrier Discharge Used for Inactivation of
More informationApproved BME Electives (Updated 11/2/2015)
Approved BME Electives (Updated 11/2/2015) Department of Chemical and Biological Engineering CHE 302 (Heat and mass transfer operation) CHE 402 (Introduction to microelectronics fabrication technology)
More informationMicro/nano and precision manufacturing technologies and applications
The 4th China-American Frontiers of Engineering Symposium Micro/nano and precision manufacturing technologies and applications Dazhi Wang School of Mechanical Engineering Dalian University of Technology
More informationKavli Workshop for Journalists. June 13th, CNF Cleanroom Activities
Kavli Workshop for Journalists June 13th, 2007 CNF Cleanroom Activities Seeing nm-sized Objects with an SEM Lab experience: Scanning Electron Microscopy Equipment: Zeiss Supra 55VP Scanning electron microscopes
More informationSilesian Nano Cluster innovation - entrepreneurship - nanotechnology
Silesian Nano Cluster innovation - entrepreneurship - nanotechnology Origin Cluster was initiated and is coordinated by NANONET Foundation (organization devoted to promote modern entrepreneurship and popularize
More informationHaleh Azari, Ph.D. AASHTO Materials Reference Laboratory (AMRL) AASHTO Subcommittee on Materials Meeting August 2007
Haleh Azari, Ph.D. AASHTO Materials Reference Laboratory (AMRL) AASHTO Subcommittee on Materials Meeting August 2007 AMRL Research Program Mission Meet the Research and Standards Needs of the AASHTO Member
More informationCurriculum Vitae of Physics Department Faculty Members
Kingdom of Saudi Arabia Ministry of education King Khalid University Faculty of sciences for Girls in Abha Curriculum Vitae of Physics Department Faculty Members 1437/1438H (2016/2017G) 1- Dr. Magda Abd-
More informationIIT Bombay joins India-CMS proposal
IIT Bombay joins India-CMS proposal Pradeep Sarin, Assistant Professor, Department of Physics, IIT Bombay Page 1 of 13 Overlap of research interests: IIT-B & BARC Physics: Studies of jet fragmentation
More informationEFFECT OF CONCENTRATION AND SALT ADDITIVE ON TAYLOR CONE STRUCTURE. Baturalp YALCINKAYA, Fatma YENER, Funda Cengiz-Çallıoğlu, Oldrich JIRSAK
EFFECT OF CONCENTRATION AND SALT ADDITIVE ON TAYLOR CONE STRUCTURE Baturalp YALCINKAYA, Fatma YENER, Funda Cengiz-Çallıoğlu, Oldrich JIRSAK Nonwoven Department, Faculty of Textile Engineering, Technical
More informationCEITEC/Central European Institute of Technology BUT
GENERAL PRESENTATION Complete denomination: Brno University of Technology, Central European Institute of Technology Location (city, country): Brno, Czech Republic Technicka 10, 61600 Brno, CR Director:
More informationAgricultural. Chemistry. Agricultural production: crops and livestock Agrichemicals development: herbicides, pesticides, fungicides, fertilizers, etc.
Agricultural Agricultural production: crops and livestock Agrichemicals development: herbicides, pesticides, fungicides, fertilizers, etc. Agrichemicals testing Environmental testing Regulation Government:
More informationNanoscale Issues in Materials & Manufacturing
Nanoscale Issues in Materials & Manufacturing ENGR 213 Principles of Materials Engineering Module 2: Introduction to Nanoscale Issues Top-down and Bottom-up Approaches for Fabrication Winfried Teizer,
More informationJournal of Industrial Textiles OnlineFirst, published on January 29, 2009 as doi: /
Journal of Industrial Textiles OnlineFirst, published on January 29, 2009 as doi:10.1177/1528083708092013 Comparative Studies of Silver Nanocomposite Fibers QUFU WEI,* DAN TAO, BINGYAO DENG AND FENGLIN
More informationASTM International Committee E56 on Nanotechnology
ASTM International Committee E56 on Nanotechnology http://www.astm.org/commit/committee/e56.htm Debra L. Kaiser Material Measurement Laboratory, NIST Vice-Chair, Committee E56 ANSI Panel Meeting February
More informationNATIONAL INSTITUTE OF TECHNOLOGY WARANGAL MAKEUP EXAMINATIONS, JUNE 2012
MAKEUP EXAMINATIONS, JUNE 2012 1. Make up examinations are scheduled to be conducted from 18.06.2012 to 30.06.2012. 2. Make up examinations are conducted centrally for all B. Tech Students. 3. Make up
More informationSCANNING THERMAL MICROSCOPY OF THERMOELECTRIC PULSED LASER DEPOSITED NANOSTRUCTURES
SCANNING THERMAL MICROSCOPY OF THERMOELECTRIC PULSED LASER DEPOSITED NANOSTRUCTURES VANIŠ Jan 1,2, ZELINKA Jiří 1, ZEIPL Radek 1, JELÍNEK Miroslav 1, KOCOUREK Tomáš 1, REMSA Jan 1, NAVRÁTIL Jiří 3 1 Institute
More informationInstitute of Organic Chemistry with Centre of Phytochemistry
Institute of Organic Chemistry with Centre of Phytochemistry Sofia 2007 The Institute of Organic Chemistry with Centre of Phytochemistry (IOCCP) at the Bulgarian Academy of Sciences was founded in 1960.
More informationTraC A disruptive new hand-held rapid measurement system to verify pharma equipment surface cleanliness
TraC A disruptive new hand-held rapid measurement system to verify pharma equipment surface cleanliness Presented by: Ray Reid, President, Photon Systems Come see this at booth # 514 Agenda Present method
More informationStudent Projects for
MINERALS RESOURCES Student Projects for 2016-17 The CSIRO On-line Analysis (OLA) Group offers opportunities for students to undertake applied physics research projects at our Lucas Heights laboratories.
More informationx Contents Segmented Mirror Telescopes Metal and Lightweight Mirrors Mirror Polishing
Contents 1 Fundamentals of Optical Telescopes... 1 1.1 A Brief History of Optical Telescopes.................... 1 1.2 General Astronomical Requirements..................... 6 1.2.1 Angular Resolution.............................
More informationShared Experimental Facilities Your Partner for Materials Characterization at the University of California, Santa Barbara
Shared Experimental Facilities Your Partner for Materials Characterization at the University of California, Santa Barbara MATERIALS RESEARCH LABORATORY AT UCSB: AN NSF MRSEC Shared Experimental Facilities
More informationNanostructure. Materials Growth Characterization Fabrication. More see Waser, chapter 2
Nanostructure Materials Growth Characterization Fabrication More see Waser, chapter 2 Materials growth - deposition deposition gas solid Physical Vapor Deposition Chemical Vapor Deposition Physical Vapor
More informationCOMPARISON OF MIGRATION AND REACTIVATION PROPERTIES OF NEW TYPES OF IRON NANOPARTICLES. Jaroslav Nosek, Kristýna Pešková, Zuzana Masopustová
COMPARISON OF MIGRATION AND REACTIVATION PROPERTIES OF NEW TYPES OF IRON NANOPARTICLES Jaroslav Nosek, Kristýna Pešková, Zuzana Masopustová Technical University of Liberec, CxI, Studentská 2, 461 17 Liberec
More informationThe Second Half Year 2017 PAL-XFEL Call for Proposals
The Second Half Year 2017 PAL-XFEL Call for Proposals Summary Information for Submitting Proposals We encourage scientists from all over the world to submit applications for beam time proposal to utilize
More informationServices in Chemistry for a Sustainable World
Table of Content 2 Services in Chemistry for a Sustainable World COMPANY PROFILE TECHNICAL PROFILE General Information... 3 Our Services... 4 Project Types & Pricing Options... 5 Reaction & Catalyst Portfolio...
More informationTrade Sustainability Impact Assessment in support of negotiations of a DCFTA between the EU and Egypt
Trade Sustainability Impact Assessment in support of negotiations of a DCFTA between the EU and Egypt Annexes to the final Interim Technical Report Client: European Commission - DG TRADE Rotterdam, 30
More informationNanoQuébec: Québec network in nanotechnologies
NanoQuébec: Québec network in nanotechnologies Mohamed Chaker Professor, INRS-EMT Chair of the scientific affairs of NanoQuébec Tier I Canada Research Chair in Plasmas applied to micro and nanomanufacturing
More informationAccurate Measurement of Transmittance and Reflectance for Engineering Applications
Accurate Measurement of Transmittance and Reflectance for Engineering Applications Dr. Chen Fangzhi Laboratory Manager Façade & Roof Materials Testing Laboratory OTM Solutions Pte Ltd PerkinElmer INTour
More informationCHARACTERIZATION of NANOMATERIALS KHP
CHARACTERIZATION of NANOMATERIALS Overview of the most common nanocharacterization techniques MAIN CHARACTERIZATION TECHNIQUES: 1.Transmission Electron Microscope (TEM) 2. Scanning Electron Microscope
More information