O-Rings. Product Description: Part Numbers: O-Rings: Imperial Seals. Quad O-Rings: O-Ring
|
|
- Curtis Rodgers
- 6 years ago
- Views:
Transcription
1 Material: Temp. ange Nitrile -40 C to 120 C Low Temp. Nitrile -55 C to 120 C Highly Saturated Nitrile -40 C to 150 C Viton (Fluorocarbon) -25 C to 204 C PTFE -200 C to 250 C Aflas 0 C to 230 C Neoprene -45 C to 135 C EPM -54 C to 150 C Perfluoroelastomer -15 C to 300 C Silicone -55 C to 230 C Fluorosilicone -55 C to 200 C Material information is not intended for design purposes. Please consult Hi-Tech Seals when designing applications. O-ing Square Cut O-ing Quad O-ing Product escription: The O-ring is the most widely used seal in history because of its simplicity, low cost, ease of installation and small space requirements. O-rings are designed for both static and dynamic applications. A properly designed O-ring groove allows the O-ring to be squeezed diametrically out-of-round even before the application of pressure. The O-ring seals by distortion of its resilient elastic compound to fill the leakage path. Part Numbers: - Prefix ash Number Prefix (Material/urometer): : Square Cut : Quad : N70, N90, LTN, HS7, HS8, HS9, V75, V90, LTV, T, A80, NEO, E70, E80, PF7, PF9, KAL, S70, FS7 TS7, TS9 QN7, QN9, QV7, QE7 Example: HS Highly Saturated Nitrile, 80 urometer - 1-3/4 Nom. I.., 1/8 Nom Avenue N 1
2 Imperial Seals Static adial Applications E/2 Pneumatic applications typically do not use a Back-up ring. O-ing epth Squeeze Inches % E iametrical Clearance Max. * idth / No ing One ing Two ings adius Static Axial (Face) Applications O-ing epth / Squeeze idth / % Hydraulic Pneumatic adius Avenue N
3 eciprocating Applications E/2 Pneumatic applications typically do not use a Back-up ring. O-ing Squeeze epth Hydraulic Pneumatic iametrical No Clearance Hydraulic Pneumatic Inches % Inches % Max. ing E * idth / One ing Two ings adius Limits for Extrusion LIMITS FO EXTUSION There are different methods to counter O-ring extrusion. One of these methods is to simply increase the durometer rating of the O-ring. However, as you increase the durometer, the O-ring can become less malleable. Another option would be the use of anti-extrusion devices. These are thin rings made of hard plastic materials such as PTFE, Nylon, and PEEK. Once in place these rings will provide essentially zero clearance. Fluid Pressure (Bar) NO EXTUSION EXTUSION Fluid Pressure (psi) educe the clearance shown by 60% when using silicone or fluorosilicone elastomers. 6.9 mm 0 In UOMETE (HANESS SHOE A) Total iametral Clearance * (adial Clearance if Concentricity Between Avenue N 3
4 Imperial Seals I /32 1/ ± ± /64 3/ ± ± /16 1/ ± ± /64 1/ ± ± /32 1/ ± ± /8 1/ ± ± /32 1/ ± ± /16 1/ ± ± /32 1/ ± ± /4 1/ ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± /2 1/ ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± /4 1/ ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± / ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± /4 1/ ± ± /16 1/ ± ± /8 1/ ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± / ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± / ± ± /4 1/ ± ± /2 1/ ± ± /4 1/ ± ± / ± ± /4 1/ ± ± /2 1/ ± ± /4 1/ ± ± / ± ± /4 1/ ± ± /16 3/ ± ± /32 3/ ± ± /8 3/ ± ± /32 3/ ± ± /16 3/ ± ± /32 3/ ± ± /4 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /2 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /4 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± / ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /4 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /2 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /4 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± / ± ± Avenue N
5 /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /4 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /2 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /4 3/ ± ± /16 3/ ± ± /8 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± /16 1/ ± ± /4 1/ ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± /2 1/ ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± /4 1/ ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± / ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± /4 1/ ± ± /16 1/ ± ± /8 1/ ± ± /16 1/ ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± / ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± / ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± / ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± / ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± Avenue N 5
6 Imperial Seals / ± ± /4 1/ ± ± /2 1/ ± ± /4 1/ ± ± / ± ± /4 1/ ± ± /2 1/ ± ± /4 1/ ± ± / ± ± /4 1/ ± ± /2 1/ ± ± /4 1/ ± ± / ± ± /4 1/ ± ± /2 1/ ± ± /4 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± /16 3/ ± ± /2 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /4 3/ ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± / ± ± /16 3/ ± ± /8 3/ ± ± /16 3/ ± ± /4 3/ ± ± /16 3/ ± ± /8 3/ ± ± /2 3/ ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± / ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± /2 3/ ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± / ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± /2 3/ ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± / ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± /2 3/ ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± / ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± /2 3/ ± ± /8 3/ ± ± /4 3/ ± ± /8 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /4 3/ ± ± /2 3/ ± ± /4 3/ ± ± / ± ± /2 3/ ± ± / ± ± /2 3/ ± ± Avenue N
7 / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± / ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± /2 1/ ± ± /8 1/ ± ± /4 1/ ± ± /8 1/ ± ± / ± ± /4 1/ ± ± /2 1/ ± ± /4 1/ ± ± / ± ± /4 1/ ± ± /2 1/ ± ± /4 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± /2 1/ ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± / ± ± ash Number OB Series I ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± Hi-Tech Seals offers O-rings in sizes ranging from These O-ring size dimensions and tolerances are unassigned under ISO In addition, Hi-Tech Seals stocks specific non-standard crosssection O-rings such as 3/8, 1/2 and 3/ Avenue N 7
O-Ring Design Guide REGISTERED QMS. ISD
O-Ring Design Guide ISO 9001 REGISTERED QMS ISD Table of Contents O-Ring Design Guide Hi-Tech Seals Inc. Compound Specifications 3 Machining Specifications 4 O-Ring -Section 4 O-Ring Gland Types 4 ID Stretch/OD
More informationO-RING REFERENCE AS568 SIZES
O-RING REFERENCE S THE FREUDENBERG NOK SEALING TECHNOLOGIES O-RING DESIGN QUICK REFERENCE GUE This design quick reference guide is intended for use in specifying O-ring and groove dimensions for static
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationO-Ring Handbook. America s Most Responsive Warehouse. Houston, Texas
14407_APG_CVR 7/12/04 12:33 PM Page 1 O-Ring Handbook America s Most Responsive Warehouse (713) 675-5271 1-800-888-5223 FAX: (713) 675-2730 FAX: 1-800-444-3252 P.O. Box 213 (77001) 6039 Armour Dr. (77020)
More informationThe 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
More informationA Guide to O-Ring Applications, Specifications and Elastomeric Materials
A Guide to O-Ring Applications, Specifications and Elastomeric Materials Products Include: FDA, 3A and Class VI Detectomer Cord Quad Rings What is an O-ring? O-ring Specifications and Applications Seal
More informationHRN/HRN-C Series Hydraulic Vane Rotary Actuators
HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12
More informationParker O-Ring Material Offering Guide ORD 5712
Parker O-Ring Material Offering Guide ORD 5712 Failure, improper selection or improper use of the products and/ or systems described herein or related items can cause death, personal injury or property
More informationA Guide to O-Ring Applications, Specifications and Elastomeric Materials
A Guide to O-Ring Applications, Specifications and Elastomeric Materials Products Include: FDA, 3A and Class VI Detectomer ionassure Antimicrobial Cord Quad Rings Vulcanizing What is an O-ring? O-ring
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationIndex. Warman 13.5 / 1 CHH SuperSet Numbers Warman 3 / 2 DHH SuperSet Numbers Warman 4 / 3 EHH SuperSet Numbers Warman 6 / 4 FHH SuperSet Numbers
Index Page 1. Page 2. Page 3. Page4. Page 5. Page6. Page 7. Page 8. Cover Index Ahlstrom - Imperial SuperSet numbers: Ahlstrom APT 1 Ahlstrom APT 2 Ahlstrom APT 3 Ahlstrom APT 4 Ahlstrom APT 5 Ahlstrom
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationCompound Selection Guide
THIS DOCUMENT SHOULD BE USED AS A DESIGN GUIDE FOR SELECTING SUITABLE ELASTOMERIC MATERIALS FOR YOUR APPLICATION. IT IS DIVIDED INTO THREE SECTIONS: POLYMERS The polymers used by Precision Associates are
More information98 Series Backpressure Regulators and Relief Valves
9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationO-Rings: A Definition
CORPORTE OFFICE http://www.zatkoff.com Copyright 2013 Zatkoff Seals & Packings, Farmington Hills, MI. ll Rights Reserved 1-1 GRND RPIDS, MI SGINW, MI WRREN, MI CINCINNTI, OH CLEVELND, OH TOLEDO, OH INDINPOLIS,
More informationCKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.
G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke
More informationA COMPLETE LINE OF QUALITY SEALS
Catalog $6.00 DEMAND QUALITY DEMAND U.S. SEAL A COMPLETE LINE OF QUALITY SEALS Catalog 1008 ADVANTAGES OF U.S. SEALS As most engineers know, a successful seal must be designed to give long life, reduce
More information507F. Multi-Port Sanitary Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. Pharmaceutical. Bio-Technology.
507F Multi- Sanitary Ball Valve Full ISO 5 Mounting Pad For Automated & Manual Service Pharmaceutical Bio-Technology Cosmetic Food & Beverage The 507F Series //5-Way Sanitary Ball Valve The 507F is a true
More informationmandata_us :43 Pagina 83 (1,1) FHB 82
8 FHB SERIES FHB Working pressure 4600 psi Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body ( M a t e r i a l s ) Head: Cast iron (chemical heat tre a t
More informationPolymer Chemistry POLYMER CHEMISTRY
Polymer Chemistry POLYMER CHEMISTRY Polymer Chemistry As far back as 1839, Charles Goodyear first improved the elastic properties of natural rubber by heating with sulfur (vulcanization). It was not until
More informationO-rings around the clock... around the clock...
O-rings Designation The common designation of an O-ring provides information on the inner diameter, the cross section, the material and the hardness: O-ring 50-3 NBR 70 hardness in Shore A 1629 material
More informationxanik API 6D Trunnion Ball Valves
API 6D Trunnion Ball Valves BV - XANIK SIDE ENTRY TRUNNION BALL VALVES table of contents BALL VALVES INDEX BV - XANIK SIDE ENTRY TRUNION BALL VALVES BV - 3 XANIK BALL VALVE DESIGN FEATURES BV - 4 thru
More informationInternational O-Ring Standard
-1 NF T 47-501 SMS 1586 ISO 6149 Minneapolis, MN 55412 Toll: (800) 394-6590 Shortly after O-Rings first came into coon use, it became obvious that standards for O-Ring sizes, tolerances, and groove design
More informationExperimental study of the frictional heating phenomenon in elastomers
Surface and Contact Mechanics including Tribology XII 189 Experimental study of the frictional heating phenomenon in elastomers B. Pinedo 1, M. Hadfield 2, M. Conte 3 & A. Igartua 1 1 IK4 Tekniker, Tribology
More informationBettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
More informationFluid Cooling Industrial PF Series
Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationPRESSURE GAUGE SELECTORS
PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed
More informationDS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
More informationCooler-Bypass Thermostat Valve, Size 10
Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
/way ball valve with electric rotary actuator, ball valve in plastic, N 50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Type 0 can
More informationTellus 27 cross reference
Tellus 27 cross reference The Borg System is 100 % Tellus 27 cross reference Introduction This web site: Describes methods for forecast verification, including their characteristics, pros and cons. The
More informationTRUNNION BALL VALVE BA-1401D (EN)
TRUNNION BALL VALVE BA-1 (EN) ABOUT US FBV Inc. is an ISO 1 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves
More informationOnline Calculation of Guide Rings for Hydraulic Cylinders
Online Calculation of Guide Rings for Hydraulic Cylinders Fietz Roland Haraldsson Anna 1 Outline 1 2 3 4 5 6 7 Guide Rings General Information / Introduction Guide Rings Synthetic Materials Demarcation
More informationNews & Views from Hi-Tech Seals Vol. 35 March 2014 ISO Micro-Vu Matrix. Edmonton, AB (Head Office) Avenue NW
News & Views from Hi-Tech Seals Vol. 35 March 2014 Micro-Vu Matrix ISO 9001 REGISTERED QMS ISD Edmonton, AB (Head Office) 1 Tech Talk News & Views from Hi-Tech Seals Vol. 35 March 2014 Tolerances vs. Dimension
More informationIdentification of SFD force coefficients Large Clearance Open Ends SFD
32 nd Turbomachinery Research Consortium Meeting Identification of SFD force coefficients Large Clearance Open Ends SFD TRC-SFD-1-212 Luis San Andrés Mast-Childs Professor May 212 TRC Project 32513/1519FB
More informationRelative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully
More informationABOUT US MISSION STATEMENT
PL-0B PLUG VALVE ABOUT US FBV Inc. is an ISO 00 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valve and butterfly
More informationAPPENDIX APPENDIX. appendix table of contents
Contents page Alphabetical Index 410-415 Materials Used / Glossary of Terms 416 Fluid Compatibility Table 417-419 How to Size Groove Dimensions for Seals 420-421 Examples of Seal Failures and Their Causes
More informationTelecommunications Pipe
Telecommunications Pipe About Poly Pipe Pty Ltd Located in the Hunter Valley, NSW, Australia, Poly Pipe Pty Ltd (Poly Pipe) has an ultra modern extrusion, high tech manufacturing facility. It supplies
More information[5] Stress and Strain
[5] Stress and Strain Page 1 of 34 [5] Stress and Strain [5.1] Internal Stress of Solids [5.2] Design of Simple Connections (will not be covered in class) [5.3] Deformation and Strain [5.4] Hooke s Law
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA:
TECNICA DATA: ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. Nominal diameter: Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS Series NF E -0.
More informationBB1 & BB2 INSTALLATION & MAINTENANCE INSTRUCTIONS
BB1 & BB2 INSTALLATION & MAINTENANCE INSTRUCTIONS DESCRIPTION / IDENTIFICATION The BB series valve uses Proportion- Air closed loop technology for pressure control. It gives an output pressure proportional
More informationCNG Trunnion Ball valve of class 0 Of BMT Co. Ltd. Make
Mobilität Documents regarding Approval of CNG Trunnion Ball valve of class 0 Of BMT Co. Ltd. Make Approval number: E4-110R-000308-00 Report No: IN110-A0-120035 Dated 16-July-2012 Name of technical service
More informationPa 200 100 50 100-80 125-100 160-125 200-160 250-200 315-250 400-315 500-400 630-500 p t drop Pressure 10 5 800-630 1000-800 1250-1000 1 0,5 20 50 100 500 1000 5000 l/s 100 500 1000 5000 10000 m 3 /h Volume
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS
More informationWAFER PATTERN BUTTERFLY TYP Z 011-A
TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: 0 ( only PN0/) Face-to-face: EN
More informationDOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ.
LOREM IPSUM JE ZULT MAAR HZ m Head m/s m/s m/s m/s m/s Ø m Ø Ø Ø Ø l/s Flow kw Shaft power P Ø m/h Ø 9 Ø Ø kw 9 Total input power P Ø DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, xv AP-, AKP- and AEP-
More informationRotary Joints. Series DP
Rotary Joints Series DP Rotary Joints Series DP DP rotary joints are suitable for: hot and cold water modified design -00 for thermal oil Small Series also for hydraulic oil and compressed air high speeds
More informationPaper GT Luis San Andrés. Bonjin Koo. Sung-Hwa Jeung. Supported by Pratt & Whitney Engines and Turbomachinery Research Consortium
Proceedings of ASME Turbo Expo 2018: Turbine Technical Conference and Exposition, June 11-15, 2018, Oslo, Norway Paper GT2018-76224 EXPERIMENTAL FORCE COEFFICIENTS FOR TWO SEALED ENDS SQUEEZE FILM DAMPERS
More informationDescription Quantity Opening Weight Max Rating 01/4721 Hydraulic Grip supplied with no faces, Single actuator, 15mm Pair Face 15Kg 60kN 315 bar
A Hydraulic grip with single actuator, single actuator grips have one side adjusted by manual tightening action screw and the grips are suitable for offset sample alignment for shear testing Ideal for
More informationSafety valve with unit approval type MV..X.., SV..X..
Safety valve with unit approval type MV..X.., SV..X.. Operating pressure p max = 0 bar Flow Q max = 0 lpm Safety valve type CMVX 2.. with unit approval see D 77 TÜV These safety valves are intended for
More informationHydraulic Fundamentals Hydraulics Definition Advent of Oil Hydraulics Pascal s Law Pressure
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
More informationCustomer: Ashton Industrial Sales Ltd. South Road, Harlow Essex CM20 2AR UNITED KINGDOM. Project/Customer: Profilex HM spacer
Page 1 of 11 Customer: Ashton Industrial Sales Ltd. South Road, Harlow Essex CM20 2AR UNITED KINGDOM Project/Customer: Profilex HM spacer Content: U f simulation of profiles in accordance to EN ISO 10077-2
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationMM54HC08 MM74HC08 Quad 2-Input AND Gate
MM54HC08 MM74HC08 Quad 2-Input AND Gate General Description These AND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption
More informationPRODUCTION LINES INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS. compliance on products shown is complete or in-progress
PRODUCTION LINES European Product Line INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS compliance on products shown is complete or in-progress INDEX: Air Feeds...2 Servo Feeds...4 Straighteners...6 Stock Reels...7
More informationEngineered Plastic Solutions TM. Surface Modification
Engineered Plastic Solutions TM Surface Modification E n g i n e e r i n g C u s t o m F a b r i c a t i o n M a n u f a c t u r i n g Services A partnership with TriStar will give you a competitive edge.
More informationM O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features
T E C H N I C A L I N F O R M A T I O N M A N U A L F O R T H E A 1 0 V 0 V A R I A B L E D I S P L A C E M E N T P U M P S A10V0 PUMP Features High Efficiency through load sensing (= fuel savings) Maximum
More informationStandard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between 30 C and 30 C with a Vitreous Silica Dilatometer 1
Designation: D 696 08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between 30 C and 30 C with a Vitreous Silica Dilatometer 1 This standard is issued under the fixed designation
More informationFluorocarbon C3F8 Properties. Table of Contents
Fluorocarbon C3F8 Properties (octafluoropropane R218) Table of Contents 1. C3F8... 2 1.1 Saturation line curve for C 3 F 8...3 1.2 logp-h diagram for C 3 F 8...4 1.3 Extended logp-h diagram for C 3 F 8...5
More informationHD 049 HD 069 HD 172 HD 319 HD 419 HD 619. Operating pressure up to 8700 psi Nominal flow rate up to gpm us
H i g h P re s s u re i l t e r K i t s H 049 H 069 H 172 H 319 H 419 H 619 Operating pressure up to 8700 psi Nominal flow rate up to 118.9 gpm 40.95-3us e s c r i p t i o n pplication In the high pressure
More informationSmart Polymer Material as Artificial Muscle Actuator
Smart Polymer Material as Artificial Muscle Actuator Yusuf Wibisono Advanced Materials Science and Engineering Actuator Motion-generating device A mechanical device for moving or controlling a mechanism
More informationRATE- AND STATE-DEPENDENT FRICTION MODEL FOR ELASTOMERIC SEALS
RATE- AND STATE-DEPENDENT FRICTION MODEL FOR ELASTOMERIC SEALS Oliver Heipl*, Hubertus Murrenhoff* * Institute for Fluid Power Drives and Controls (IFAS) RWTH Aachen University Steinbachstraße 53, 5272
More information411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.
Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00
More informationCarousel 6 Plus Reaction Station
1/5 Carousel 6 Plus Reaction Station Référence Description Qté Prix (2011) RR99943 System 34 - Heated System - Basic 5,948.50 RR99942 System 33 - Heated System - Basic + Hotplate 6,971.50 RR99944 System
More informationN-Channel Enhancement-Mode Vertical DMOS FET
N-Channel Enhancement-Mode Vertical DMOS FET Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds Excellent thermal stability Integral
More informationR=1/u. May 27, POE FINAL REVIEW.notebook
POE PART B THURSDAY 6/12 FINAL REVIEW 1. Design Process A problem solving strategy used to develop a solution A) Design Brief written information which contains problem statement, spec s, and constraints.
More informationSmartec Pressure Sensor (bridge output)
DATASHEET Pressure sensor family 1/5 Smartec Pressure Sensor (bridge output) Features * Commercial grade * DIP version for high volume production * Gauge or absolute pressure * Resistive bridge technology
More information2.3 T214 PTFE-LINED BUTTERFLY VALVE T 214 TECHNICAL DATA
-INED BUTTERFY VAVE T ug type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal diameter: 0 Face-to-face:
More information2.1 T 211-A TECHNICAL DATA
PTFE-INED BUTTERFY VAVE T -A Fully PTFE-lined wafer type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA
More information3mm Phototransistor PT204-6C
Features Fast response time High photo sensitivity Pb free RoHS Compliance This product itself will remain within RoHS compliant version. Copliance with EU REACH Compliance Halogen Free.(Br
More informationFVBSS fixed volume bottle
N FVBSS fixed volume bottle Sampling System The SENSOR Fixed Volume Bottle Sampling System (FVBSS) provides a repeatable fixed volume of sample during each sampling process without stopping flow of the
More informationNUMERICAL ANALYSES OF ELECTROMAGNETIC FIELDS IN HIGH VOLTAGE BUSHING AND IN ELECTROMAGNETIC FLOW METER
Intensive Programme Renewable Energy Sources May 2011, Železná Ruda-Špičák, University of West Bohemia, Czech Republic NUMERICAL ANALYSES OF ELECTROMAGNETIC FIELDS IN HIGH VOLTAGE BUSHING AND IN ELECTROMAGNETIC
More informationMM54HC154 MM74HC154 4-to-16 Line Decoder
MM54HC154 MM74HC154 4-to-16 Line Decoder General Description This decoder utilizes advanced silicon-gate CMOS technology and is well suited to memory address decoding or data routing applications It possesses
More informationWorking pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.
8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel
More informationMM54HC175 MM74HC175 Quad D-Type Flip-Flop With Clear
MM54HC175 MM74HC175 Quad D-Type Flip-Flop With Clear General Description This high speed D-TYPE FLIP-FLOP with complementary outputs utilizes advanced silicon-gate CMOS technology to achieve the high noise
More informationLME series digital low differential pressure sensors
The LME differential low pressure sensors are based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. The innovative LME technology features superior sensitivity
More informationExternal gear pump Type G3, Series 3X
NS to 5 External gear pump Type G3, Series 3X Up to 2 bar Up to 5.2 cm 3 RE 039/07.00 Replaces: 03.00 Plain bearings for high loads Mono-block bearing New principle of hydrostatic gap compensation Drive
More informationTaping, Labeling, Packing, Storage and Coding Taiwan Semiconductor
1 Taping 1.1 Order Information, Related Packing Units, Tape and Reel Size and Labeling 1.2 Shape of Reel and Dimensions 1.3 Leader and Trailer Dimensions 1.4 Cover Tape Peel Strength Tape Dimensions 2
More informationMookambigai College of Engineering, Pudukkottai, Tamil Nadu, India
ISSN XXXX XXXX 2017 IJESC Research Article Volume 7 Issue No.6 Structural Optimization of ER Spring Collet for Maximized Gripping Action Ram Prasad. S 1, Pravin Kumar. N 2, Jerry Andrew Fabian. S 3 M.E
More informationCharacteristic Symbol Value Units V GSS
NEW PROUCT Features Low On-Resistance: R S(ON) Low Gate Threshold Voltage Low Input Capacitance Fast Switching Speed Low Input/Output Leakage Complementary Pair lso vailable in Lead Free Version Mechanical
More informationIMAGINE A WORLD WHERE YOUR CRITICAL SERVICE ACTUATION PROBLEMS ARE SOLVED
ROTARY ACTUATORS IMAGINE A WORLD WHERE YOUR CRITICAL SERVICE ACTUATION PROBLEMS ARE SOLVED A SERIES SINGLE RACK, FULL FEATURE PNEUMATIC ROTARY ACTUATORS A SERIES OHIO OSCILLATOR HIGH TORQUE, PNEUMATIC
More informationN-Channel Enhancement-Mode Vertical DMOS FETs
VN16 N-Channel Enhancement-Mode Vertical DMOS FETs Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds High input impedance and high
More information5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
More informationA wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
More informationAttachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface
ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the
More informationTHE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.
P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE
More informationStandardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
More informationApplications C9T S 5 M D 6137 AAR X. Internal Connection. Terminal Style. M = Screw clamp Terminal
Overview Polypropylene metallized film with cylindrical aluminium can type filled with resin, 3 phase delta connection and safety device FPU. Applications Typical applications power factor correction.
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationThe Ultimate Innovators
Product Over view america, inc. The Ultimate Innovators www.yamadapump.com Yamada Corporation S ince its beginning in 1905, Yamada has been at the forefront in developing the most complete line of air
More informationSample and Bleed Valves
Pure-Flo Sample and Bleed Valves www.ittpureflo.com Application The Pure-Flo product line of Sample and Bleed Valves provides compact and economical means to extract process samples and bleed off excess
More informationCustomer Approval Sheet
Customer Approval Sheet Product: 3014 White SMD LED Part Number: PT30A02 V0 (5600K) Customer: Issue Date: 2011/01/03 Feature High brightness Top view LED Dice Technology : InGaN Small package outline (LxWxH)
More informationFitting PS P - B - R2
INTERNAL STRUCTURE PS86 (G 3/8) 2 3 FEATURES Solidstate pressure switch with no mechanical moving parts Isolated output via a photo-coupler Switching pressure adjustable and hysteresis band adjustable
More informationConductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
More informationE 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.
More information