A Guide to O-Ring Applications, Specifications and Elastomeric Materials
|
|
- Rosanna Ryan
- 5 years ago
- Views:
Transcription
1 A Guide to O-Ring Applications, Specifications and Elastomeric Materials Products Include: FDA, 3A and Class VI Detectomer ionassure Antimicrobial Cord Quad Rings Vulcanizing
2 What is an O-ring? O-ring Specifications and Applications Seal design is an important factor in food, dairy, beverage and pharmaceutical processing. An o-ring is a very important part of that seal. An o-ring is a doughnut-shaped seal manufactured in a specific elastomer. O-rings are generally installed in a seal to prevent leaking and unwanted escape or loss of fluid. Rubber Fab offers AS568 Standard o-rings, metric, DIN and custom sizes in a wide variety of materials. There are many factors to think about when choosing an elastomer for your application. Having o-rings and gaskets that are FDA Compliant for use in food applications, Class VI tested for pharmaceutical applications or Detectomer products that meet the requirements of the Food Safety Modernization Act means you can be assured that your sanitary o-ring and gasket has been tested to the highest standards. This means reduced downtime, giving you the best product for your application. Our Detectomer products meet and exceed the standards set by the Food Safety Modernization Act, making it detectable by in-line x-ray inspection and metal detection systems as well as magnetic separators, reducing costly product loss and recalls. Our FDA & Detectomer o-rings are FDA CFR approved. Physical Properties of an O-ring Hardness: O-rings are available in medium-hard (70 durometer), softer (50 & 60 durometer) & harder (85+ durometer). Standard is 70, +/- 5 with other durometers available. Tensile Strength: is the force (measured in psi) needed to break an o-ring at its ultimate strain. This is a good measure to determine if an o-ring is at the end of its life from being exposed to certain fluids. Creep: the characteristic of all elastomers to show a gradual decrease in the o-rings shape under a constant load over time. Temperature: is important when choosing an o-ring. Not all elastomers will react the same way in the same application. Temperature plays a large part in how an o-ring will function. Each of Rubber Fab s o-rings ship with a certificate of conformance, ensuring complete lot and batch traceability. Rubber Fab also offers solid cord stock or we can vulcanize (cut and bond) an o-ring to your size specification. Available Elastomers Detectomer Tuf-Steel Buna EPDM FKM & Aflas FFKM Kalrez PTFE Platinum-Cured Silicone FEP Encapsulated EPDM, FKM & Silicone Other materials are available upon request 2 Kalrez is a registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. All Rubber Fab O-Ring Group rights reserved.
3 Detectomer Metal Detectable/X-ray Inspectable O-rings Rubber Fab presents a full line of metal detectable/x-ray inspectable o-rings and cord. Over time and repeated clean-in-place, sterilization, and handling during equipment cleaning, component parts used in food, beverage and pharmaceutical processing equipment and pipework can degrade. As the o-ring degrades, there is a high risk of material fragments breaking off, resulting in product contamination, product recall, product loss and costly downtime. Rubber Fab s line of Detectomer o-rings can be spotted by in-line x-ray inspection and metal detection systems as well as magnetic separators. Detectomer fragments as small as mm can easily be detected allowing your system to quickly reject contaminated product, allowing worn elastomers to be replaced without great expense or costly downtime. Detectomer Benefits Increase effectiveness of existing detection systems Reduce potential product loss Minimize product recalls Decrease operating and labor costs Available Detectomer Materials (In Standard & FDA) Buna FKM Tuf-Steel EPDM Silicone Do You Know About... DETECTOMER The Gasket Champion X-ray inspection and metal detection systems provide confidence to food, dairy and pharmaceutical manufacturers by insuring product safety and integrity as outlined by the Food Safety Modernization Act. Detectomer is a full line of metal detectable/x-ray inspectable elastomeric products designed to work with any existing conveyor, pipe line or free fall detection systems. Detectomer products include sanitary gaskets, o-rings, cord, sanitary screens, sheet, rod, extrusions, and cam & groove gaskets and screens. DETECTOMER : Providing Processing Security Against Elastomeric Contamination. Rubber Fab O-Ring Group 3
4 Tuf-Steel Metal Detectable O-rings Composed of a unique proprietary blend of non-pigmented PTFE and 36L passivated and atomized Stainless Steel, Tuf-Steel o-rings, are the strongest o-rings in the pharmaceutical, biotech, food and beverage industries. Whatever your application, the Tuf-Steel o-ring is ready to do the job. Tuf-Steel is ideal for extreme temperature applications, such as steam, hot oil and friers, where temperatures range from -350 F to 550 F. Tuf-Steel does not revert, eliminating creep and cold flow, resulting in a leak free seal. Because the superior strength and chemical resistance of Tuf-Steel allows it to go the distance without leaking, it significantly reduces maintenance and system downtime by staying in place when cleaning and validating a system. Testing and a decade of documented application usage has demonstrated that Tuf-Steel is the choice for perfect surface performance, outstanding durability and extended service life in both SIP (steam in place) and WFI (water for injection) applications. Tuf-Steel Benefits 500 CIP/SIP cycles guaranteed Minimal expansion/contraction stability with minimal thermal expansion Excellent chemical resistance Semi-rigid material No obstruction of flow Maintains sealing stability in T processes TUF-STEEL IS NOT JUST ANOTHER PRODUCT LINE Testing and a decade of documented application usage has demonstrated that Tuf-Steel is the choice for perfect surface performance, outstanding durability and extended service life. Tuf-Steel is ideal for sanitary steam pipe connections in extreme temperature applications, such as frier and hot oil applications, with temperatures ranging from -350 F up to 550 F. The superior strength of Tuf-Steel eliminates creep and cold flow providing a leak-free seal. Tuf-Steel is available in: Type I Standard TC Gasket, Mini TC Gasket, Type II Flanged, Type III Envelope Style, Sanitary TC Screen Gasket, Sanitary TC Orifice Plate Gasket, Steam Trap Orifice Plate Gasket, Sheet, Solid Rod, Ansi Flange, and Custom Gaskets. It s the future of the processing industry 4 Rubber Fab O-Ring Group
5 New! ionassure Antimicrobial Treated Products UNTREATED TRI-CLAMP GASKET Rubber Fab is pleased to announce our new Antimicrobial Technologies division and the ionassure line of products. These new gaskets and o-rings integrate a patented and EPA registered antimicrobial that is permanently embedded in our elastomers for durable, potent and long-lasting effectiveness* against a broad spectrum of bacterial contamination including but not limited to Salmonella, Listeria, and E.coli. TREATED TRI-CLAMP GASKET * SANITIZING ON CONTACT* Key Features: Highly Effective, Long Lasting Chemical Free Non-Leaching Maintain Cleanliness Permanently Embedded Currently ionassure antimicrobial treated gaskets and o-rings are available in Buna, Platinum-Cured Silicone, Peroxide-Cured Silicone and EPDM. Sizes will range from /2 through 4 for gaskets. Antimicrobial sheet available upon request. 6 Log Reduction ( %) Sample Test Results for E.coli** 8 Control Material E.coli Concentration (CFU/mL)(CFU/mL) E.coli Concentration Listeria Concentration (CFU/mL) BacteriaBacteria Recovered T=24h@ T=24h 7 Log Reduction ( %) 9. x (07) 0,000,000 7 Log Reduction 0ˆ7 7 LogMaterial Reduction ( %) ( %) Treated 8 (0 ) 00,000,000 (0 ) 00,000,000 (06),000,000 Control Material 9. x 9. x Control Material (07) 0,000,000 (07) 0,000,000 0ˆ7 0ˆ7 2.2 x 0ˆ5 Treated Material Treated Material (05) 00,000 (06),000,000 (06),000,000 (04) 0, x 0ˆ5 2.2 x 0ˆ5 5 (0 ) 00,000 (05) 00,000 3 (0 ),000 (04) 0,000 (04) 0,000 (02) 00 (03),000 (03),000 (0) 0 (02) 00 (02) 00 <0 Bacteria Recovered Inoculated (0 ) 0(0 ) T=24h Bacteria <0 <0 Inoculated Inoculated BacteriaBacteria BacteriaBacteria Recovered T=24h@ T=24h ** Products evaluated in accordance with ASTM-280 method to test ability to inhibit the growth of microorganisms in a 24 hour period of contact. Sample Test Results for Salmonella** (08) 00,000, % % <0 <0 Inoculated Inoculated BacteriaBacteria (07) 0,000,000 6 Log Reduction 6 Log Reduction ( %) ( %) Treated Material (08) 00,000,000 (08) 00,000, x 0ˆ7 3.7 x 0ˆ7 (06),000,000 Control Material Control 3.5 x Material 0ˆ5 (07) 0,000,000 (07) 0,000,000 Treated Material Treated Material (05) 00,000 (06),000,000 (06),000, x 0ˆ5 (04) 0, x 0ˆ5 (05) 00,000 (05) 00,000 (03),000 (04) 0,000 (04) 0,000 (02) 00 (03),000 (03),000 (0) 0 (02) 00 (02) 00 <0 Bacteria Recovered Inoculated (0 ) 0(0 ) T=24h Bacteria % % % (07) 0,000,000 6 Log Reduction 6 Log Reduction ( %) ( %) Treated Material (08) 00,000,000 (08) 00,000,000 (06),000,000 Control Material 2.3 x 0ˆ7 Control Material 2.3 x 0ˆ7 2.3 x 0ˆ5 (07) 0,000,000 (07) 0,000,000 Treated Material Treated Material (05) 00,000 (06),000,000 (06),000, x 0ˆ5 (04) 0, x 0ˆ5 5 (0 ) 00,000 (05) 00,000 3 (0 ),000 (04) 0,000 (04) 0,000 (02) 00 (03),000 (03),000 (0) 0 (02) 00 (02) 00 <0 Bacteria Recovered Inoculated (0 ) 0(0 ) T=24h Bacteria 6 Log Reduction ( %) (0 ) 00,000,000 Sample Test Results for Listeria** 3.7 x 0ˆ7 2.3 x 0ˆ % E.coli Concentration (CFU/mL) Control Material Listeria Concentration (CFU/mL)(CFU/mL) Listeria Concentration (08) 00,000,000 Salmonella Concentration (CFU/mL)(CFU/mL) Salmonella Concentration Control Material % % % Salmonella Concentration (CFU/mL) 8 <0 <0 Inoculated Inoculated BacteriaBacteria BacteriaBacteria Recovered T=24h@ T=24h Antimicrobial Technologies *Antimicrobial protection is limited to the treated article and does not protect a user against disease causing bacteria. Always clean products thoroughly after each use and follow recommended maintenance and cleaning procedures. Rubber Fab O-Ring Group 5
6 Quad Rings Double the Sealing Surface Quad rings are a unique o-ring with a unique profile, doubling the sealing surface of a traditional o-ring. This design also provides lower friction and because it has more of a square profile, and can resist spiral twisting. Quad Ring Profile Features Two sealing surfaces for a positive seal with less friction The quad cross-section resists twisting and extrusion Twice the surface for sealing which creates a more effective seal with less wear and longer service life. Available in Buna, EPDM, FKM, & Silicone, as well as Detectomer Buna, EPDM, FKM, & Silicone O-ring Sizing Cone For Sizing O-rings Have an o-ring that you need to replace and you don t know what size it is? Rubber Fab s o-ring cone is the best solution for sizing o-rings when you are unsure of what to order. Slide the o-ring down the cone to see what size is needed. Makes for easy measuring as the numbers are printed directly on the cone. Insert the o-ring to determine the crossection then slide the o-ring down the corresponding side. 6 Rubber Fab O-Ring Group
7 Encapsulated O-rings FEP and PFA Encapsulated Chemical attack and swelling are the primary causes of o-ring failure. Encapsulated o-rings match the chemical and temperature resistance of solid PTFE o-rings, and possess properties of elasticity and recovery, which are crucial in many sealing applications. Encapsulated o-rings are virtually chemically inert and provide easy cleanup of viscous materials. These o-rings economically and effectively replace Kalrez and other exotic o-ring compounds. Encapsulated o-rings will decrease downtime and hence increase profitability wherever corrosive fluids and gases cause premature seal failure. Encapsulated o-rings are available in AS568 Dash sizes and metric and are phthalate free. Temperature ranges by elastomer: FEP/PFA Encapsulated FKM: -0ºF to 300ºF FEP Encapsulated Silicone: -80ºF to 400ºF PFA Encapsulated Silicone: -80ºF to 500ºF FEP Encapsulated EPDM: -65ºF to 300ºF Encapsulated O-ring Profile Kalrez is a registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. Do You Know About... Camlock Gaskets Rubber Fab s gaskets for Camlock couplings are available in the standard style and Detectomer. Available in the following materials: Buna, EPDM, FKM, & Silicone Available in the following sizes: /2, 3/4,, -/4, -/2, 2, 2-/2, 3, 4, and 6 Rubber Fab s camlock gaskets are also available in FEP encapsulated for use with practically all chemicals, even in the toughest corrosive environments. These gaskets combine the best qualities of two materials to form a superior seal: Elastomer as the core for resilience, and FEP on the outside for chemical resistance. FEP Encapsulated Camlock gaskets are available in Silicone with sizes ranging from /2-4. FEP Silicone or FKM Rubber Fab O-Ring Group 7
8 Rubber Fab Has Cord For Custom O-rings Rubber Fab s cord is the perfect solution for custom o-ring sizes as well as in the field fabrication. Our cord can be ordered in different lengths and vulcanized to make o-rings for applications where a standard size will not fit. FDA and Class VI materials are offered in both standard and metric. Our Silicone coated fiberglass cord is perfect for high heat applications. We stock metal detectable/x-ray inspectable cord in.093 ID - diameter,.6 mm - 7 mm diameter. Consult factory for other sizes. Available Materials Buna Silicone EPDM FKM Silicone/Fiberglass Metal Detectable Metal Detectable/ X-ray Inspectable We Can Vulcanize Rubber Fab has the capability to vulcanize or cut and bond o-rings, manway gaskets and other custom profiles to meet all of your application requirements. There are two types of bonding Hot Bond (is the stronger bond) Cold Bond Bonding Agent is dependent of material you are bonding. The two types of cuts we can make are Straight or Blunt and Angled (45 degrees). Please visit for available manway profiles. How to Measure an O-ring There is a simple way to measure an o-ring. Of course we suggest an o-ring cone to make sure that the size is exactly what you need. Formula to determine an o-ring diameter is: Cut length 3.45 = xx cross section = I.D. I.D. O.D. W 8 Rubber Fab O-Ring Group
9 Buna O-rings Nitrile Rubber Buna is one of the most versatile of materials due to its resistance to many chemicals and good physical properties. Buna is the material of choice for food applications. It should not be exposed to direct sunlight as it will deteriorate. Buna s operating temperature is -22ºF to 22ºF and is manufactured in black and white. Buna is available in phthalate free or metal detectable/x-ray inspectable. Physical Properties* of Buna Excellent Good Fair Poor Abrasion Resistance Compression Set Elongation Flame Resistance Gas Permeability Low Temperature Flexibility Tear Resistance Tensile Strength Chemical Resistance* of Buna Excellent Good Fair Poor Brake Fluid Dilute Acids Dilute Alkalis Hydraulic Fluids Ketones Ozone Petroleum Oils Silicone Fluids Steam Strong Acids Transmission Fluids Water Weather * Excellent, good, fair and poor are intended to serve as general guidelines only. Actual testing in the application environment is always recommended. Rubber Fab O-Ring Group 9
10 EPDM O-rings Ethylene Propylene EDPM is a versatile compound that works well in both low & high temperatures. It has an acceptable level when it comes to using it with steam and water. EPDM has moderate to good resistance to a variety of chemicals, making it compound of choice for a variety of applications. EPDM temperature range is -58ºF to 302ºF and is manufactured in black and white. EPDM is available in phthalate free or metal detectable/x-ray inspectable. Physical Properties* of EPDM Excellent Good Fair Poor Abrasion Resistance Compression Set Elongation Flame Resistance Gas Permeability Low Temperature Flexibility Tear Resistance Tensile Strength Chemical Resistance* of EPDM Excellent Good Fair Poor Alcohols Dilute Acids Dilute Alkalis Gasoline Hydraulic Fluids Oxygenated Solvents Ozone Petroleum Oils & Greases Steam Water Weather * Excellent, good, fair and poor are intended to serve as general guidelines only. Actual testing in the application environment is always recommended. 0 Rubber Fab O-Ring Group
11 FKM and Aflas FFKM O-rings Fluorocarbon FKM is a better grade compound which is well suited for prolonged exposure to oils at high operating temperatures. FKM is also good for steam applications. Operating temperature range is 2ºF to 392ºF and is manufactured in black, white and brown. FKM is phthalate free and also available in metal detectable/x-ray inspectable. Aflas FFKM - combines the great chemical resistance of PTFE & FKM. This perfluoroelastomer is great for chemical plants as it can withstand highly corrosive fluids. FFKM s operating temperature range is -0ºF to 599ºF. FKM is available in phthalate free or metal detectable/x-ray inspectable. Physical Properties* of FKM Excellent Good Fair Poor Abrasion Resistance Compression Set Elongation Flame Resistance Gas Permeability Low Temperature Flexibility Tear Resistance Tensile Strength Chemical Resistance* of FKM Excellent Good Fair Poor Anhydrous Ammonia Dilute Acids Dilute Alkalis Ketones Ozone Petroleum Oils Solvents Steam Water Weather * Excellent, good, fair and poor are intended to serve as general guidelines only. Actual testing in the application environment is always recommended. Rubber Fab O-Ring Group
12 PTFE O-rings Polytetrafluoroethylene PTFE is a premium grade material that works well in harsh chemical applications because of its low moisture absorption and wide temperature range. Operating temperature range for PTFE is -300ºF to 500ºF and is manufactured in white. PTFE is available in phthalate free or metal detectable/x-ray inspectable. Physical Properties* of PTFE Excellent Good Fair Poor Abrasion Resistance Compression Set Elongation Flame Resistance Gas Permeability Low Temperature Flexibility Tear Resistance Tensile Strength Chemical Resistance* of PTFE Excellent Good Fair Poor Brake Fluid Dilute Acids Dilute Alkalis Hydraulic Fluids Ketones Ozone Petroleum Oils Silicone Fluids Steam Strong Acids Transmission Fluids Water Weather * Excellent, good, fair and poor are intended to serve as general guidelines only. Actual testing in the application environment is always recommended. 2 Rubber Fab O-Ring Group
13 Silicone O-rings Fluorocarbon Silicone is the material of choice in pharmaceutical applications, and in sanitary water systems when PTFE is not feasible due to severely misaligned fittings. Platinumcured silicone is very flexible at low temperatures and will not impart any taste or odor. The operating range is -70ºF to 390ºF and is manufactured in clear, white and red. Silicone is available in phthalate free or metal detectable/x-ray inspectable. Physical Properties* of Silicone Excellent Good Fair Poor Abrasion Resistance Compression Set Elongation Flame Resistance Gas Permeability Low Temperature Flexibility Tear Resistance Tensile Strength Chemical Resistance* of Silicone Excellent Good Fair Poor Dilute Acids Dilute Alkalis Ketones Ozone Petroleum Oils Steam Vegetable Oils Water Weather * Excellent, good, fair and poor are intended to serve as general guidelines only. Actual testing in the application environment is always recommended. Rubber Fab O-Ring Group 3
14 Standard O-ring Sizes by AS 568 Dash Numbers Custom Sizes are Available Call for Details Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. I.D. O.D. Width I.D. C.S. Cu.In. I.D. C.S. #00 /32 3/32 / ± ± ± ± #002 3/64 9/64 3/ ± ± ± ± #003 /6 3/6 /6.056 ± ± ± ± #004 5/64 3/64 /6.070 ± ± ± ± #005 7/64 5/64 /6.0 ± ± ± ± #006 /8 /4 /6.4 ± ± ± ± #007 5/32 9/32 /6.45 ± ± ± ± #008 3/6 5/6 /6.76 ± ± ± ± #009 7/32 /32 /6.208 ± ± ± ± #00 /4 3/8 /6.239 ± ± ± ± #0 5/6 7/6 /6.30 ± ± ± ± #02 3/8 /2 /6.364 ± ± ± ± #03 7/6 9/6 /6.426 ± ± ± ± #04 /2 5/8 /6.489 ± ± ±.2.78 ± #05 9/6 /6 /6.55 ± ± ± ± #06 5/8 3/4 /6.64 ± ± ± ± #07 /6 3/6 /6.676 ± ± ± ± #08 3/4 7/8 /6.739 ± ± ± ± #09 3/6 5/6 /6.80 ± ± ± ± #020 7/8 /6.864 ± ± ± ± #02 5/6 -/6 /6.926 ± ± ± ± #022 -/8 /6.989 ± ± ± ± #023 -/6-3/6 /6.05 ± ± ± ± #024 -/8 -/4 /6.4 ± ± ± ± #025-3/6-5/6 /6.76 ± ± ± ± #026 -/4-3/8 /6.239 ± ± ± ± #027-5/6-7/6 /6.30 ± ± ± ± #028-3/8 -/2 /6.364 ± ± ± ± #029 -/2-5/8 /6.489 ± ± ± ± #030-5/8-3/4 /6.64 ± ± ± ± #03-3/4-7/8 /6.739 ± ± ± ± #032-7/8 2 /6.864 ± ± ± ± # /8 /6.989 ± ± ± ± #034 2-/8 2-/4 /6 2.4 ± ± ± ± #035 2-/4 2-/8 / ± ± ± ± # /8 2-/2 / ± ± ± ± #037 2-/2 2-5/8 / ± ± ± ± # /8 2-3/4 / ± ± ± ± # /4 2-7/8 / ± ± ± ± # /8 3 / ± ± ± ± Vol. Cu. Cent. 4 Rubber Fab O-Ring Group
15 Standard O-ring Sizes by AS 568 Dash Numbers Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. # /8 / ± ± ± ± #042 3-/4 3-3/8 / ± ± ± ± #043 3-/2 3-5/8 / ± ± ± ± # /4 3-7/8 / ± ± ± ± # /8 / ± ± ± ± #046 4-/4 4-3/8 / ± ± ± ± #047 4-/2 4-5/8 / ± ± ± ± # /4 4-7/8 / ± ± ± ± Vol. Cu. Cent. # /8 / ± ± ± ± #050 5-/4 5-3/8 / ± ± ± ± #05 to #0 O-Ring Sizes that are Custom #02 /6 /4 3/ ± ± ± ± #03 3/32 9/32 3/32.08 ± ± ± ± #04 /8 5/6 3/32.2 ± ± ± ± #05 5/32 /32 3/32.43 ± ± ± ± #06 3/6 3/8 3/32.74 ± ± ± ± #07 7/32 3/32 3/ ± ± ± ± #08 /4 7/6 3/ ± ± ± ± #09 5/6 /2 3/ ± ± ± ± #0 3/8 9/6 3/ ± ± ± ± # 7/6 5/8 3/ ± ± ± ± #2 /2 /6 3/ ± ± ± ± #3 9/6 3/4 3/ ± ± ± ± #4 5/8 3/6 3/32.62 ± ± ± ± #5 /6 7/8 3/ ± ± ± ± #6 3/4 5/6 3/ ± ± ± ± #7 3/6 3/ ± ± ± ± #8 7/8 -/6 3/ ± ± ± ± #9 5/6 -/8 3/ ± ± ± ± #20-3/6 3/ ± ± ± ± #2 -/6 -/4 3/ ± ± ± ± #22 -/8-5/6 3/32.2 ± ± ± ± #23-3/6-3/8 3/32.74 ± ± ± ± #24 -/4-7/6 3/ ± ± ± ± #25-5/6 -/2 3/ ± ± ± ± #26-3/8-9/6 3/ ± ± ± ± #27-7/6-5/8 3/ ± ± ± ± #28 -/2 -/6 3/ ± ± ± ± #29-9/6-3/4 3/ ± ± ± ± Rubber Fab O-Ring Group 5
16 Standard O-ring Sizes by AS 568 Dash Numbers Custom Sizes are Available Call for Details Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. #30-5/8-3/6 3/32.62 ± ± ± ± #3 -/6-7/8 3/ ± ± ± ± #32-3/4-5/6 3/ ± ± ± ± #33-3/6 2 3/ ± ± ± ± #34-7/8 2-/6 3/ ± ± ± ± #35-5/6 2-/8 3/ ± ± ± ± # /6 3/ ± ± ± ± #37 2-/6 2-/4 3/ ± ± ± ± #38 2-/8 2-5/6 3/ ± ± ± ± #39 2-3/6 2-3/8 3/ ± ± ± ± Vol. Cu. Cent. #40 2-/4 2-7/6 3/ ± ± ± ± #4 2-5/6 2-/2 3/ ± ± ± ± #42 2-3/8 2-9/6 3/ ± ± ± ± #43 2-7/6 2-5/8 3/ ± ± ± ± #44 2-/2 2-/6 3/ ± ± ± ± #45 2-9/6 2-3/4 3/ ± ± ± ± #46 2-5/8 2-3/6 3/ ± ± ± ± #47 2-/6 2-7/8 3/ ± ± ± ± #48 2-3/4 2-5/6 3/ ± ± ± ± #49 2-3/6 3 3/ ± ± ± ± #50 2-7/8 3-/6 3/ ± ± ± ± # /6 3/ ± ± ± ± #52 3-/4 3-7/6 3/ ± ± ± ± #53 3-/2 3-/6 3/ ± ± ± ± #54 3-3/4 3-5/6 3/ ± ± ± ± # /6 3/ ± ± ± ± #56 4-/4 4-7/6 3/ ± ± ± ± #57 4-/2 4-/6 3/ ± ± ± ± #58 4-3/4 4-5/6 3/ ± ± ± ± # /6 3/ ± ± ± ± #60 5-/4 5-7/6 3/ ± ± ± ± #6 5-/2 5-/6 3/ ± ± ± ± #62 5-3/4 5-5/6 3/ ± ± ± ± # /6 3/ ± ± ± ± #64 6-/4 6-7/6 3/ ± ± ± ± #65 6-/2 6-/6 3/ ± ± ± ± #66 6-3/4 6-5/6 3/ ± ± ± ± # /6 3/ ± ± ± ± #68 7-/4 7-7/6 3/ ± ± ± ± #69 7-/2 7-/6 3/ ± ± ± ± Rubber Fab O-Ring Group
17 Standard O-ring Sizes by AS 568 Dash Numbers Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. Vol. Cu. Cent. #70 7-3/4 7-5/6 3/ ± ± ± ± # /6 3/ ± ± ± ± #72 8-/4 8-7/6 3/ ± ± ± ± #73 8-/2 8-/6 3/ ± ± ± ± #74 8-3/4 8-5/6 3/ ± ± ± ± # /6 3/ ± ± ± ± #76 9-/4 9-7/6 3/ ± ± ± ± #77 9-/2 9-/6 3/ ± ± ± ± #78 9-3/4 9-5/6 3/ ± ± ± ± #79 - #200 O-Ring Sizes that are Custom #20 3/6 7/6 /8.7 ± ± ± ± #202 /4 /2 /8.234 ± ± ± ± #203 5/6 9/6 /8.296 ± ± ± ± #204 3/8 5/8 /8.359 ± ± ± ± #205 7/6 /6 /8.42 ± ± ± ± #206 /2 3/4 /8.484 ± ± ± ± #207 9/6 3/6 /8.546 ± ± ± ± #208 5/8 7/8 /8.609 ± ± ± ± #209 /6 5/6 /8.67 ± ± ± ± #20 3/4 /8.734 ± ± ± ± #2 3/6 -/6 /8.796 ± ± ± ± #22 7/8 -/8 /8.859 ± ± ± ± #23 5/6-3/6 /8.92 ± ± ± ± #24 -/4 /8.984 ± ± ± ± #25 -/6-5/6 /8.046 ± ± ± ± #26 -/8-3/8 /8.09 ± ± ± ± #27-3/6-7/6 /8.7 ± ± ± ± #28 -/4 -/2 /8.234 ± ± ± ± #29-5/6-9/6 /8.296 ± ± ± ± #220-3/8-5/8 /8.359 ± ± ± ± #22-7/6 -/6 /8.42 ± ± ± ± #222 -/2-3/4 /8.484 ± ± ± ± #223-5/8-7/8 /8.609 ± ± ± ± #224-3/4 2 /8.734 ± ± ± ± #225-7/8 2-/8 /8.859 ± ± ± ± # /4 /8.984 ± ± ± ± #227 2-/8 2-3/8 / ± ± ± ± #228 2-/4 2-/2 / ± ± ± ± # /8 2-5/8 / ± ± ± ± Rubber Fab O-Ring Group 7
18 Standard O-ring Sizes by AS 568 Dash Numbers Custom Sizes are Available Call for Details Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. Vol. Cu. Cent. #230 2-/2 2-3/4 / ± ± ± ± #23 2-5/8 2-7/8 / ± ± ± ± # /4 3 / ± ± ± ± # /8 3-/8 / ± ± ± ± # /4 / ± ± ± ± #235 3-/8 3-3/8 / ± ± ± ± #236 3-/4 3-/2 / ± ± ± ± # /8 3-5/8 / ± ± ± ± #238 3-/2 3-3/4 / ± ± ± ± # /8 3-7/8 / ± ± ± ± # /4 4 / ± ± ± ± #24 3-7/8 4-/8 / ± ± ± ± # /4 / ± ± ± ± #243 4-/8 4-3/8 / ± ± ± ± #244 4-/4 4-/2 / ± ± ± ± # /8 4-5/8 / ± ± ± ± #246 4-/2 4-3/4 / ± ± ± ± # /8 4-7/8 / ± ± ± ± # /4 5 / ± ± ± ± # /8 5-/8 / ± ± ± ± # /4 / ± ± ± ± #25 5-/8 5-3/8 / ± ± ± ± #252 5-/4 5-/2 / ± ± ± ± # /8 5-5/8 / ± ± ± ± #254 5-/2 5-3/4 / ± ± ± ± # /8 5-7/8 / ± ± ± ± # /4 6 / ± ± ± ± # /8 6-/8 / ± ± ± ± # /4 / ± ± ± ± #259 6-/4 6-/2 / ± ± ± ± #260 6-/2 6-3/4 / ± ± ± ± #26 6-3/4 7 / ± ± ± ± # /4 / ± ± ± ± #263 7-/4 7-/2 / ± ± ± ± #264 7-/2 7-3/4 / ± ± ± ± # /4 8 / ± ± ± ± # /4 / ± ± ± ± #267 8-/4 8-/2 / ± ± ± ± #268 8-/2 8-3/4 / ± ± ± ± Rubber Fab O-Ring Group
19 Standard O-ring Sizes by AS 568 Dash Numbers Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. Vol. Cu. Cent. # /4 9 / ± ± ± ± # /4 / ± ± ± ± #27 9-/4 9-/2 / ± ± ± ± #272 9-/2 9-3/4 / ± ± ± ± # /4 0 / ± ± ± ± # /4 / ± ± ± ± #275 0-/2 0-3/4 / ± ± ± ± #276 -/4 / ± ± ± ± #277 -/2-3/4 /8.484 ± ± ± ± # /4 /8.984 ± ± ± ± # /4 / ± ± ± ± # /4 / ± ± ± ± # /4 / ± ± ± ± # /4 / ± ± ± ± # /4 / ± ± ± ± # /4 / ± ± ± ± #285 to #308 O-Ring Sizes that are Custom #309 7/6 3/6 3/6.42 ± ± ± ± #32 5/8 3/6.600 ± ± ± ± #33 /6 -/6 3/6.662 ± ± ± ± #34 3/4 -/8 3/6.725 ± ± ± ± #35 3/6 -/2 3/6.787 ± ± ± ± #36 7/8 -/4 3/6.850 ± ± ± ± #37 5/6-5/6 3/6.92 ± ± ± ± #38-3/8 3/6.975 ± ± ± ± #39 -/6-7/6 3/6.037 ± ± ± ± #320 -/8 -/2 3/6.00 ± ± ± ± #32-3/6-9/6 3/6.62 ± ± ± ± #322 -/4-5/8 3/6.225 ± ± ± ± #323-5/6 -/6 3/6.287 ± ± ± ± #324-3/8-3/4 3/6.350 ± ± ± ± #325 -/2-7/8 3/6.475 ± ± ± ± #326-5/8 2 3/6.600 ± ± ± ± #327-3/4 2-/8 3/6.725 ± ± ± ± #328-7/8 2-/4 3/6.850 ± ± ± ± # /8 3/6.975 ± ± ± ± #330 2-/8 2-/2 3/ ± ± ± ± #33 2-/4 2-5/8 3/ ± ± ± ± Rubber Fab O-Ring Group 9
20 Standard O-ring Sizes by AS 568 Dash Numbers Custom Sizes are Available Call for Details Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. Vol. Cu. Cent. # /8 2-3/4 3/ ± ± ± ± #333 2-/2 2-7/8 3/ ± ± ± ± # /8 3 3/ ± ± ± ± # /4 3-/8 3/ ± ± ± ± # /8 3-/4 3/ ± ± ± ± # /8 3/ ± ± ± ± #338 3-/8 3-/2 3/ ± ± ± ± #339 3-/4 3-5/8 3/ ± ± ± ± # /8 3-3/4 3/ ± ± ± ± #34 3-/2 3-7/8 3/ ± ± ± ± # /8 4 3/ ± ± ± ± # /4 4-/8 3/ ± ± ± ± # /8 4-/4 3/ ± ± ± ± # /8 3/ ± ± ± ± #346 4-/8 4-/2 3/ ± ± ± ± #347 4-/4 4-5/8 3/ ± ± ± ± # /8 4-3/4 3/ ± ± ± ± #349 4-/2 4-7/8 3/ ± ± ± ± # /8 5 3/ ± ± ± ± #35 4-3/4 5-/8 3/ ± ± ± ± # /8 5-/4 3/ ± ± ± ± # /8 3/ ± ± ± ± #354 5-/8 5-/2 3/ ± ± ± ± #355 5-/4 5-5/8 3/ ± ± ± ± # /8 5-3/4 3/ ± ± ± ± #357 5-/2 5-7/8 3/ ± ± ± ± # /8 6 3/ ± ± ± ± # /4 6-/8 3/ ± ± ± ± # /8 6-/4 3/ ± ± ± ± # /8 3/ ± ± ± ± #362 6-/4 6-5/8 3/ ± ± ± ± #363 6-/2 6-7/8 3/ ± ± ± ± # /4 7-/8 3/ ± ± ± ± # /8 3/ ± ± ± ± #366 7-/4 7-5/8 3/ ± ± ± ± #367 7-/2 7-7/8 3/ ± ± ± ± # /4 8-/8 3/ ± ± ± ± # /8 3/ ± ± ± ± #370 8-/4 8-5/8 3/ ± ± ± ± Rubber Fab O-Ring Group
21 Standard O-ring Sizes by AS 568 Dash Numbers Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. Vol. Cu. Cent. #37 8-/2 8-7/8 3/ ± ± ± ± # /4 9-/8 3/ ± ± ± ± # /8 3/ ± ± ± ± #374 9-/4 9-5/8 3/ ± ± ± ± #375 9-/2 9-7/8 3/ ± ± ± ± # /4 0-/8 3/ ± ± ± ± # /8 3/ ± ± ± ± #378 0-/2 0-7/8 3/ ± ± ± ± #379-3/8 3/ ± ± ± ± #380 -/2-7/8 3/6.475 ± ± ± ± # /8 3/6.975 ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ± ± ± ± # /8 3/ ±.0.20 ± ± ± # /8 3/ ±.5.20 ± ± ± # /8 3/ ± ± ± ± #396 to #424 O-Ring Sizes that are Custom #425 4-/2 5 / ± ± ± ± # /8 5-/8 / ± ± ± ± # /4 5-/4 / ± ± ± ± # /8 5-3/8 / ± ± ± ± # /2 / ± ± ± ± #430 5-/8 5-5/8 / ± ± ± ± #43 5-/4 5-3/4 / ± ± ± ± # /8 5-7/8 / ± ± ± ± #433 5-/2 6 / ± ± ± ± # /8 6-/8 / ± ± ± ± # /4 6-/4 / ± ± ± ± # /8 6-3/8 / ± ± ± ± Rubber Fab O-Ring Group 2
22 Standard O-ring Sizes by AS 568 Dash Numbers Custom Sizes are Available Call for Details Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. Vol. Cu. Cent. # /2 / ± ± ± ± #438 6-/4 6-3/4 / ± ± ± ± #439 6-/2 7 / ± ± ± ± # /4 7-/4 / ± ± ± ± # /2 / ± ± ± ± #442 7-/4 7-3/4 / ± ± ± ± #443 7-/2 8 / ± ± ± ± # /4 8-/4 / ± ± ± ± # /2 / ± ± ± ± #446 8-/2 9 / ± ± ± ± # /2 / ± ± ± ± #448 9-/2 0 / ± ± ± ± # /2 / ± ± ± ± #450 0-/2 / ± ± ± ± #45 -/2 / ± ± ± ± #452 -/2 2 /4.475 ± ± ± ± # /2 /4.975 ± ± ± ± #454 2-/2 3 / ± ± ± ± # /2 / ± ± ± ± Rubber Fab O-Ring Group
23 Standard O-ring Sizes by AS 568 Dash Numbers Size Ref. AS 568 Nominal Size (inches) Actual Size (inches) Actual Size (Millimeters) Vol. Cu.In. I.D. O.D. Width I.D. C.S. I.D. C.S. Vol. Cu. Cent. #456 3-/2 4 / ± ± ± ± # /2 / ± ± ± ± #458 4-/2 5 / ± ± ± ± # /2 / ± ± ± ± #460 5-/2 6 / ± ± ± ± # /2 / ± ± ± ± #462 6-/2 7 / ± ± ± ± # /2 / ± ± ± ± #464 7-/2 8 / ± ± ± ± # /2 / ± ± ± ± #466 8-/2 9 / ± ± ± ± # /2 / ± ± ± ± #468 9-/2 20 / ± ± ± ± # /2 / ± ± ± ± # /2 / ± ± ± ± # /2 / ± ± ± ± # /2 / ± ± ± ± # /2 / ± ± ± ± # /2 / ± ± ± ± # /2 / ± ± ± ± Rubber Fab O-Ring Group 23
24 Rubber Fab Offers a Complete Line of Sanitary Gaskets and Hoses Tri-Clamp Gaskets, Screens, Sock Screens, 50# Flanges, Orifice Plates and Vertical Orifice Plates Sight Gauges: PTFE & Polysulfone High Purity Hose, Tubing, Sanitary Molded Ends in Various Different Materials Fittings & Adapters: 36L, Standard Number Special Alloys & Non Metallic Rubber Fab Technologies Group is a member of: A Material Science Company Distributed by: ISPE 26 Brookfield Drive Sparta, NJ Fax Rubber Fab Technologies Group #RF-ORC66
A Guide to O-Ring Applications, Specifications and Elastomeric Materials
A Guide to O-Ring Applications, Specifications and Elastomeric Materials Products Include: FDA, 3A and Class VI Detectomer Cord Quad Rings What is an O-ring? O-ring Specifications and Applications Seal
More informationO-Ring Design Guide REGISTERED QMS. ISD
O-Ring Design Guide ISO 9001 REGISTERED QMS ISD Table of Contents O-Ring Design Guide Hi-Tech Seals Inc. Compound Specifications 3 Machining Specifications 4 O-Ring -Section 4 O-Ring Gland Types 4 ID Stretch/OD
More informationO-RING REFERENCE AS568 SIZES
O-RING REFERENCE S THE FREUDENBERG NOK SEALING TECHNOLOGIES O-RING DESIGN QUICK REFERENCE GUE This design quick reference guide is intended for use in specifying O-ring and groove dimensions for static
More informationTHREADED CLOSURES. For access to Filter Vessels, Strainers, Pig Launchers & Receivers. Tube Turns Products
THREADED CLOSURES For access to Filter Vessels, Strainers, Pig Launchers & Receivers Tube Turns Products HISTORY Tube Turns was founded in 927 in Louisville, Kentucky, USA. We were the f i r s t A m e
More informationMaterials of Construction and Chemical Compatibility for Sensing and Control Products
ADVANCED MATERIALS HANDLING TECHNICAL NOTE Materials of Construction and Compatibility for Sensing and Control Products INTRODUCTION Entegris Sensing and Control products are designed for use in highly
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
More informationPFA HP Plus GBK Lining Sheet
Safeguarding process purity Dupont has enhanced Teflon PFA HP in such a way that gives Teflon PFA HP Plus the same unsurpassed purity but have improved mechanical toughness and stress crack resistance,
More informationO-Ring Handbook. America s Most Responsive Warehouse. Houston, Texas
14407_APG_CVR 7/12/04 12:33 PM Page 1 O-Ring Handbook America s Most Responsive Warehouse (713) 675-5271 1-800-888-5223 FAX: (713) 675-2730 FAX: 1-800-444-3252 P.O. Box 213 (77001) 6039 Armour Dr. (77020)
More informationASTM upvc Schedule 80
ASTM upvc PRESSURE PIPING SYSTEM SPECIFICATION Pipes Standards & Quality Sch. 80 pipe is manufactured to comply with NSF Standard 61, CSA B 137.3 and ASTM D1785, consistently meeting the Quality Assurance
More informationZeta Plus HT Series. Lenntech. Applications. Features and Benefi ts. Lenticular Depth Filter Cartridges
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Zeta Plus Series Zeta Plus Series is a charge-modifi ed depth fi lter constructed with high-tensile strength media
More information60PS Series Couplings
60PS Series Couplings Tubing Size 3/8 3/4 3/8 Flow Polysulfone Produced in high performance thermoplastic Udel Polysulfone, these 3/8 flow size couplings are more durable and stable at higher temperatures.
More informationS E A L E D F L A T E X P A N S I O N J O I N T T A P E S
Uniclass CI/SfB L554 Z R E D L I N E & F L A M L I N E S E A L E D F L A T E X P A N S I O N J O I N T T A P E S R E D L I N E & F L A M L I N E S E A L E D F L AT E X PA N S I O N J O I N T S ROOF-PRO
More informationO-rings around the clock... around the clock...
O-rings Designation The common designation of an O-ring provides information on the inner diameter, the cross section, the material and the hardness: O-ring 50-3 NBR 70 hardness in Shore A 1629 material
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationS u p e r T o r q u e Pd
12 S u p e r T o r q u e Pd No: S4.5M1 mm Width S Super Torque Positive Drive Belt 4.5M 4.5mm Pitch Modified Round Tooth Profile 1 1mm Pitch Length B u i l t F o r S t r e n g t h & E n d u r a n c e Super
More informationInnovation in. Motionless Mixers
Innovation in Motionless Mixers Ross Motionless Mixers PIONEERING TECHNOLOGY. INCOMPARABLE QUALITY. WORLDWIDE LEADERSHIP. Serving all the process industries in virtually every industrialized country around
More information507F. Multi-Port Sanitary Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. Pharmaceutical. Bio-Technology.
507F Multi- Sanitary Ball Valve Full ISO 5 Mounting Pad For Automated & Manual Service Pharmaceutical Bio-Technology Cosmetic Food & Beverage The 507F Series //5-Way Sanitary Ball Valve The 507F is a true
More informationTarget Insertion Flowmeter
Principle of Operation Flow is measured in terms of dynamic force acting on a target (solid disk) in the flow stream. Hermetically sealed, bonded strain gages in a bridge circuit configuration mounted
More informationConductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
More informationCorzan Dimensional Data & Weights
Volume II: 140 PVC & CPVC Dimensional Data & Weights Industrial Technical Manual Series S E C O N D E D I T I O N XIRTEC 140 PVC & CORZAN CPVC Dimensional Data and Weights www.ipexinc.com 140 PVC & CPVC
More informationPCB-RULER-ND: Metric Side Rev 1 (March 2016) 12 inch (~30.5cm)
PCB-RULER-ND: Metric Side Rev 1 (March 2016) 12 inch (~30.5cm) Our aim was to create a reliable and accurate PCB layout reference tool. We tried to include as many useful features as possible. 1.25 x 12
More information411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.
Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00
More informationD u r a b i l i t y T h a t G o e s T h e D i s t a n c e
WEDGE TLP NARROW V-belTS A p p l i c a t i o n s Premium, longer-life narrow-profile belts for compact, high-horsepower drives. Excellent in short-centered drives or where high shock loads are present;
More informationStandard Classification System for Rubber Products in Automotive Applications 1
Designation: D 2000 0 Approved by Society of Automotive Engineers SAE Recommended Practice J200 Standard Classification System for Rubber Products in Automotive Applications 1 This standard is issued under
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationLiquid Polybutadienes and Derivatives
Liquid Polybutadienes and Derivatives Coatings & Colorants Product Range Our polyoils and derivatives are stereospecific, lowviscosity and unsaponifiable liquid polybutadienes having a high 1.4-cis double
More informationPolymer Chemistry POLYMER CHEMISTRY
Polymer Chemistry POLYMER CHEMISTRY Polymer Chemistry As far back as 1839, Charles Goodyear first improved the elastic properties of natural rubber by heating with sulfur (vulcanization). It was not until
More informationACRIFIX. Adhesives and Auxiliaries
ACRIFIX Adhesives and Auxiliaries For a perfect union PLEXIGLAS, the world s first acrylic, manufactured by our company, can be joined by a variety of methods. A distinction is made between permanent and
More informationElectromagnetic Flowmeter
Overview Flokal B.V. smart electromagnetic flow meter is hallmarked by its high performance and reliability that are based on successful, field-proven technology. It s being widely used in industries such
More informationChemistry & Technology of Sanitizers
Chemistry & Technology of Sanitizers Sterilize: Terms An Agent that will Destroys or Eliminates All Forms of Life, Including All Forms of Vegetative, or Actively Growing Bacteria, Bacterial Spores, Fungi
More informationG-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
More informationCone differential pressure flow meter. Operating manual WIDE PLUS PRECISION INSTRUMENTS CO., LTD.
Cone differential pressure flow meter Operating manual WIDE PLUS PRECISION INSTRUMENTS CO., LTD. INDEX Introduction 2 Principle Application The characteristics of flow meter Specification Technical features
More information@Copyright 2016 SKAPS Industries.
SKAPS INDUSTRIES 571 Industrial Pkwy, Commerce, GA 30529 Phone: (706) 336 7000 Fax: (706) 336 7007 E Mail: contact@skaps.com SKAPS GEOCOMPOSITE DROP IN SPECIFICATIONS @Copyright 2016 SKAPS Industries www.skaps.com
More informationIBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSNOWPLOW ACCESSORIES. Factory Original Parts
Factory Original Parts Your WESTERN snowplow is a valuable investment. The best way to assure original equipment reliability and efficiency is to purchase only genuine Western Factory Original parts and
More informationIBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSeries 7500 Formed Metal Bellows Catalog 974C
Series 00 Formed Metal Bellows Catalog C Innovators of the industry Bellows assemblies for safety valves, control valves, and regulators. When you look for a formed bellows which is reliable, has a long
More informationSTEEL. General Information
General Information General Information TYPICAL STRESS-STRAIN CURVE Below is a typical stress-strain curve. Each material has its own unique stress-strain curve. Tensile Properties Tensile properties indicate
More informationCFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
More informationED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationRubber- and cellular buffers
Rubber- and cellular buffers Rubber- and cellular buffers Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane Rail Wheels Rail
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-S10-AH-L 179517-1 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in
More informationDuPont Photovoltaic Solutions The Crucial Role of Materials in Protecting the Longevity of Solar Investments Riyadh, Saudi Arabia October 3 rd, 2017
DuPont Photovoltaic Solutions The Crucial Role of Materials in Protecting the Longevity of Solar Investments Riyadh, Saudi Arabia October 3 rd, 2017 Dr. Stephan Padlewski, Marketing Leader, EMEA DuPont
More informationSta-Saf. System. The. BSBsystems.com BSB.ie Visit our website for the most complete, up-to-date information. Reverse Buckling Technology
Catalog # 77-4001 The Sta-Saf System Reverse Buckling Technology BSBsystems.com BSB.ie Visit our website for the most complete, up-to-date information. 1 Sta-Saf System The Sta-Saf System includes 11 reverse
More informationViega ProPress Systems
Viega ProPress Systems The global leader in plumbing, heating and pipe joining systems Viega ProPress Systems Viega... The global leader in plumbing, heating and pipe joining systems. Building on Tradition
More informationTrevira Bioactive * For a plus in cleanliness and freshness. Workwear Hospital textiles. Functional apparel. Flame retardant Home textiles
Trevira Bioactive * For a plus in cleanliness and freshness Workwear Hospital textiles *This product contains an antimicrobial additive to prevent the growth of bacteria on the fibre. Functional apparel
More informationTYGON APPLICATION SPECIFIC TUBING. When there s no margin for error. A guide to Tygon tubing formulations
TYGON APPLICATION SPECIFIC TUBING When there s no margin for error A guide to Tygon tubing formulations table of contents by applications chemical processing 8, 10-18, 20, 21 environmental 8, 9, 11-13,
More information98 Series Backpressure Regulators and Relief Valves
9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or
More information135WRx-2 Direct Thermal Film
Specifications may change without notice Last update: Aug. 2016 Ref: PS-1531 (Rev. 3) S P E C I F I C A T I O N 135WRx-2 S H E E T This product specification sheet provides the detail to aid you in identifying
More informationAM 500A 500 WATT AM 1A 1 KILOWATT AM BROADCAST TRANSMITTERS. October, 1999 IM No
AM 500A 500 WATT AM 1A 1 KILOWATT AM BROADCAST TRANSMITTERS October, 1999 IM No. 597 1112 EQUIPMENT LOST OR DAMAGED IN TRANSIT. When delivering the equipment to you, the truck driver or carrier s agent
More informationUSA Mexico
1.800.231.6074 USA 001.800.426.1447 Mexico 1.800.231.6074 USA 001.800.426.1447 Mexico 1.800.231.6074 USA 001.800.426.1447 Mexico 1.800.231.6074 USA 001.800.426.1447 Mexico 1.800.231.6074 USA 001.800.426.1447
More informationConnector~Tech Providing Harsh Environment Connector
Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction
More informationA Case for Periodic Calibration or Verification of RTDs
A Case for Periodic Calibration or Verification of RTDs If you are experiencing audio problems please call the teleconference number below Phone 650-479-3208 Access code 668 676 434 Your Host and Presenter
More informationNews & Views from Hi-Tech Seals Vol. 35 March 2014 ISO Micro-Vu Matrix. Edmonton, AB (Head Office) Avenue NW
News & Views from Hi-Tech Seals Vol. 35 March 2014 Micro-Vu Matrix ISO 9001 REGISTERED QMS ISD Edmonton, AB (Head Office) 1 Tech Talk News & Views from Hi-Tech Seals Vol. 35 March 2014 Tolerances vs. Dimension
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationPIOX R. Process Analytics by Inline Refractometry. Process Insight Through Transmitted Light. Concentration Measurement.
PIOX R Concentration Measurement Process Control Conversion Rate Determination Phase Detection Product Identification Density Measurement Process Insight Through Transmitted Light PIOX R Benefits: PIOX
More informationO-Rings. Product Description: Part Numbers: O-Rings: Imperial Seals. Quad O-Rings: O-Ring
Material: Temp. ange Nitrile -40 C to 120 C Low Temp. Nitrile -55 C to 120 C Highly Saturated Nitrile -40 C to 150 C Viton (Fluorocarbon) -25 C to 204 C PTFE -200 C to 250 C Aflas 0 C to 230 C Neoprene
More informationCFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
More informationTurbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
More informationTelecommunications Pipe
Telecommunications Pipe About Poly Pipe Pty Ltd Located in the Hunter Valley, NSW, Australia, Poly Pipe Pty Ltd (Poly Pipe) has an ultra modern extrusion, high tech manufacturing facility. It supplies
More informationHydraulic Fundamentals Hydraulics Definition Advent of Oil Hydraulics Pascal s Law Pressure
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
More informationHELOXY Epoxy Functional Modifiers
Product Selector HELXY Epoxy Functional Modifiers Momentive's epoxy functional product line of HELXY Modifiers offers formulators the ability to choose between monofunctional and polyfunctional glycidyl
More informationMATERIALS SCIENCE POLYMERS
POLYMERS 1) Types of Polymer (a) Plastic Possibly the largest number of different polymeric materials come under the plastic classification. Polyethylene, polypropylene, polyvinyl chloride, polystyrene,
More informationTrevira Bioactive * For a plus in cleanliness and freshness. Workwear Hospital textiles. Functional apparel. Flame retardant Home textiles
Trevira Bioactive * For a plus in cleanliness and freshness Workwear Hospital textiles *This product contains an antimicrobial additive to prevent the growth of bacteria on the fibre. Functional apparel
More informationProtective Coatings: Non-lead orange paint RAL red (optional) non-lead paint Hot dipped galvanized conforming to ASTM A-153.
Technical Services: Tel: (66) 500-76 / Fax: (01) 71-7317 www.grinnell.com Grinnell Mechanical Products Grooved Fittings, Ductile Iron & Fabricated Steel General Description Grooved fittings provide an
More informationPhysical Properties Testing Technical Bulletin
Technical Bulletin MANUFACTURER Raven Lining Systems 13105 E. 61 st Street, Suite A Broken Arrow, OK 74012 (918) 615-0020 TENSILE TESTING OF PLASTICS ASTM D638, ISO 527 Tensile tests measure the force
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More informationTechnical Note PP TN Engineering Considerations for Temperature Change
Technical Note PP 814 - TN Engineering Considerations for Temperature Change www.performancepipe.com Like most materials, polyethylene is affected by temperature change. However, polyethylene s response
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these
More informationProperty Ozone Vs Oxygen. Molecular Formula: O3 O2. Molecular Mass: Color: light blue Colourless
What is Ozone? Ozone is a naturally occurring oxidizing and disinfecting agent which is composed of three oxygen atoms combine to form O3. It is a bluish or colorless gas with a very characteristic odour.
More informationPressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
More informationPolypropylene pleated graded-density fi lter cartridges featuring APT Construction for Extended Filter Lifetime
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Betafi ne Polypropylene pleated graded-density fi lter cartridges featuring APT Construction for Extended Filter Lifetime
More informationPVC - WHITE PRESSURE FITTINGS PRODUCTS PRICE LIST INCLUDES: PVC SCHEDULE 40, CLASS 125, POOL/SPA, LASCOTITE, ULTRAFIX REPAIR COUPLINGS PRICE GROUP
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationDS 200P. Electronic Pressure Switch. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: standard: 0. % FSO option: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 0 bar
More informationAvery Dennison LV-0700 Series Retroreflective Validation Decal Film Issued: July 2013
LV-0700 Series Reflective film is a quality, enclosed lens retorreflective material. LV- 0700 is ideal for vehicle tag and sticker requirements where low temperature application is desired such as for
More informationflexible couplings for pipe connections
www.arpol.com A R P O L INSTAL flexible couplings for pipe connections 1 TABLE OF CONTENTS Advantages & installation 3 Sealing system & applications Nominal charts Material Specifications Gaps between
More informationSPECIALTY. T h e L o w - M a i n t e n a n c e V - B e l t A l t e r n a t i v e
2012 N e o t h a n e Specialty belt for specific types of machines and equipment. Machine Tools Appliances Computer Industry Blowers Woodworking Machines Medical Industry Part No: 5M 710 5M 5mm ( 3 16
More informationCFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
More informationLecture No. (1) Introduction of Polymers
Lecture No. (1) Introduction of Polymers Polymer Structure Polymers are found in nature as proteins, cellulose, silk or synthesized like polyethylene, polystyrene and nylon. Some natural polymers can also
More informationPVC - WHITE PRESSURE FITTINGS L40P EFFECTIVE OCTOBER 1, 2018 REVISED PRODUCTS PRICE LIST
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationACRYSOL TM RM-8WE Rheology Modifier
Technical Data Sheet ACRYSOL TM RM-8WE Rheology Modifier For Water Based Coatings Regional Product Availability EMEAI Summary ACRYSOL RM-8WE Rheology Modifier is a non-ionic urethane type polymer, designed
More information3000 Residential 4000 Commercial 5000 Industrial Aluminum Fence Systems Lifetime Limited Warranty
3000 Residential 4000 Commercial 5000 Industrial Aluminum Fence Systems Lifetime Limited Warranty 3000 Series - Lifetime Limited Warranty* - Model 3131 3 Rail - With Spears Heights: 36, 42, 48 & 60 Model
More informationGUIDE TO UNDERSTANDING ASTM D2000 SPECIFICATIONS
California Gasket and Rubber Corporation 533 W. Collins Ave. Orange, CA 92867 (714) 202-8500 Phone (714) 639-0586 Fax www.calgasket.com GUIDE TO UNDERSTANDING ASTM D2000 SPECIFICATIONS ASTM D2000 is a
More information3000 Residential 4000 Commercial Aluminum Fence Systems Lifetime Limited Warranty
3000 Residential 4000 Commercial Aluminum Fence Systems Lifetime Limited Warranty 3000 Series - Lifetime Limited Warranty - w/triad Finial 36 and 42 Heights Not Available 36 and 42 Heights Not Available
More information2.3 T214 PTFE-LINED BUTTERFLY VALVE T 214 TECHNICAL DATA
-INED BUTTERFY VAVE T ug type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal diameter: 0 Face-to-face:
More informationSTATIC GAS MONITOR Type SGM/DEW Revision A of 20 aprile 2016
APPLICATIONS Moisture monitoring of air or gas (SF6) Suitable for indoor or outdoor Industrial, medical or aerospace fields HIGHLIGHTS High voltage circuit breakers commonly used for distribution and transmission
More informationFluid Cooling Industrial PF Series
Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure
More informationZeta Plus LP Series. Lenntech. Applications. Features and Benefi ts. Lenticular Depth Filter Cartridges
Lenntech info@lenntech.com Tel. +3-52-6-9 www.lenntech.com Fax. +3-52-66-289 Zeta Plus LP Zeta Plus LP filter media is a depth filter composed of inorganic filter aid cationic resin and cellulose and is
More informationThe greater the thickness the darker the colour may appear, as less light can transfer through.
T h e s p e c i f i e r s g u i d e t o P r o d u c t s u m m a r y P r o d u c t i o n F a b r i c a t i o n S h e e t s i z e s C u s t o m s h e e t s F i n i s h e s C o l o u r s Marblo * is a cross-linked
More informationStandard Practice for Heat Aging of Plastics Without Load 1
Designation: D 3045 92 (Reapproved 2003) Standard Practice for Heat Aging of Plastics Without Load 1 This standard is issued under the fixed designation D 3045; the number immediately following the designation
More informationAMBERLITE HPR1300 H Ion Exchange Resin
Product Data Sheet AMBERLITE HPR1300 H Ion Exchange Resin Uniform Particle Size, Gel, Strong Acid Cation Exchange Resin for Condensate Polishing in the Power Industry and Industrial Demineralization Applications
More informationPrima range. Alifter range. magnetical driven pumps in thermoplastic materials TMP TMA. centrifugal. self-priming
Prima range TMP centrifugal Alifter range magnetical driven pumps in thermoplastic materials TMA self-priming Prima - Alifter In this catalog Argal proposes the range of PRIMA pumps, magnetical driven,
More informationflexible couplings for pipe repair
A R P O L R E P flexible couplings for pipe repair 1 TABLE OF CONTENTS Advantages and Installation Arpol Repair Systems Nominal charts Material specifications Gaps between pipe ends Outside Diameter tolerances
More informationIntroduction to Geohazard Standard Specification for Simple Drapery
Introduction to Geohazard Standard Specification for Simple Drapery Up to now, there is no standard specification for geohazard solutions in North America. Often projects specifications are referring to
More informationCell Rupture Nanoparticles Emulsions Liposomes
Cell Rupture Nanoparticles Emulsions Liposomes High Pressure Homogenizers AVESTIN Inc., Ottawa, Canada AVESTIN Europe GmbH, Germany Tel: +1-613-736-0019 Tel: +49-621-724-5980 E-mail: avestin@avestin.com
More informationThe Ultimate Innovators
Product Over view america, inc. The Ultimate Innovators www.yamadapump.com Yamada Corporation S ince its beginning in 1905, Yamada has been at the forefront in developing the most complete line of air
More informationTemperature Measurement
Temperature Measurement 157 12 Precise and reliable measurements even in aggressive liquids all probes are encapsulated with PTFE for maximum chemical resistance. PRODUCT TIPS Page 161: 143 PT100 Temperature
More information2.1 T 211-A TECHNICAL DATA
PTFE-INED BUTTERFY VAVE T -A Fully PTFE-lined wafer type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA
More information