FOR INFORMATIONAL PURPOSES ONLY CONTACT TNT MANUFACTURING FOR SUBMITTAL

Size: px

Start display at page:

Download "FOR INFORMATIONAL PURPOSES ONLY CONTACT TNT MANUFACTURING FOR SUBMITTAL"

Francine Holt
5 years ago
Views:

1 iameter 10" W.G. Positive 2" W.G. Neg. Un- 2" W.G. Neg. 4" W.G. Neg. Un- 4" W.G. Neg. 6" W.G. Neg. Un- 6" W.G. Neg. 10" W.G. Neg. Un- 10" W.G. Neg. 4"-6" "-8" () 9"-10" () () 11"-12" () () () 13"-14" () () () () 15"-16" () () () () 17"-18" () () () () 19"-20" () () () () 22" () () () () 24" () () () () 26"-30" () () () N/ 20 () 32"-36" () N/ 22 () N/ 20 () N/ 18 () 38"-42" () N/ 22 () N/ 20 () N/ 18 () 44"-48" 22 N/ 22 () N/ 20 () N/ 18 () N/ 18 () 50"-60" 22 N/ 22 () N/ 20 () N/ 18 () N/ 16 (E) ngle Ring Reinforcement is as follows: Ring ttachment chedule - 1" x 1" x ⅛" uct iameter (inches) Number of ttachments - 1¼" x 1¼" x 3/16" up to 6" 4-1½ x 1½ x 3/16" 7"-12" 6-1½ x 1½ x ¼" 13"-17" 8 E - 2" x 2" x 3/16" 18"-29" 12 30"-54" 16 55"-60" 20 Gauges listed meet or exceed 2005 MN standards Reinforcing rings are based on 120" spacing and may be attached to the duct utilizing screws, rivits or tack welds ll duct 14" and larger will be double ribbed corrugated for additional rigidity unless otherwise specified FX: aton ve. altimore, M 21229

2 EOW 90 1 PIEE EOW ist: enterline Radius = 1.5 x izes: 3 Thru 12 = PIEE EOW ist: enterline Radius = 1.5 x = PIEE EOW ist: enterline Radius = 1.5 x izes: 3 Thru 12 = PIEE EOW ist: enterline Radius = 1.5 x = 2 X OFFET ist:,x, = FX: aton ve. altimore M

3 EOW 90 5 PIEE EOW WITH TP ist:, enterline Radius = 1.5 x = PIEE EOW ist: enterline Radius = 1.5 x = PIEE EOW ist: enterline Radius = 1.5 x = PIEE EOW WITH TP ist:, enterline Radius = 1.5 x = PIEE EOW ist: enterline Radius = 1.5 x = FX: aton ve. altimore M

4 TEE REUING TRIGHT TEE ist:,,, = - (4 min and 12 max) = 2 = - (4 min and 12 max) = 2 90 REUING TRIGHT RO ist:,,,,, = arger of or, TRIGHT TEE ist:,, = 2 = 2 90 TRIGHT RO ist:,,,, = arger of or, REUING TRIGHT RO ist:,,,,, = arger of or, + 2 = - (4 min and 12 max) = FX: aton ve. altimore M

5 TER TER TEE ist:,,, = 2 45 TER = ( or x 1.41) TER = ( or x 2) TER = ( or x 1.15) + 2 TER RO ist:,,,, = 2 REUING TER TEE ist:,,,, = - (4 min and 12 max) = 2 REUING TER RO ist:,,,,, = - (4 min and 12 max) = FX: aton ve. altimore M

6 MIENEOU TEE rotch Height is 3/4 of "" iameter REUING WYE RNH ist:,, = 2 = = - (4 min and 12 max) = 2 REUING ONI TEE ist:,,, = - (4 min and 12 max) = 2 ONI TEE ist:,,, WYE RNH ist:,,, rotch = ( x 1.41) - 2 =.207 x +1 = - (4 min and 12 max) = 2 = - (4 min and 12 max) = 2 REUING ONI RO ist:,,,,, = arger of or, + 4 ONI RO ist:,,,,, = arger of or, FX: aton ve. altimore M

7 TP TER 45 E TP When Ordering ist:, 1, 3 tandard flange is 1/2. 2 flange is also available = E TP When Ordering ist: 1, 3 tandard flange is 1/2. 2 flange is also available = 2 addle Taps vailable In 1 Piece tamped To 12 iameter hop Fabricated From 12 and above 1 OW O OMINTION TP When Ordering ist:, 1, 3,Y tandard flange is 1/2. 2 flange is also available = 2 1" 3 1 FNGE IN OR OUT 2" FNGE Y" ONI TP When Ordering ist: 1, 3, = - (4 min and 12 max) tandard flange is 1/2. 2 flange is also available = 2 W 3 X 3 1 E EMOUTH TP ist: REGITER E TP When Ordering ist: 1, 3,W 3,E E = tandard 6 ength FX: aton ve. altimore M

8 MIENEOU 2 PUN REUER When Ordering ist:,, & are small ends Raw Edge QURE TO ROUN ist:,, pecify what connection is needed on End 1" or 3" = - (4 min and 12 max) = - (4 min and 12 max) = 2 ONENTRI REUER When Ordering ist:,,, = - (4 min and 12 max) = 2 Male (O) Female (FO) OUPING When Ordering ist:, = 2 EN P When Ordering ist:, = 2 EENTRI REUER When Ordering ist:,,,,z = - (4 min and 12 max) = 2 Z = (-)/2 Z FX: aton ve. altimore M

Single-Wall Round UNI-GASKET Fitting and Related Product Dimensions

Single-Wall Round UNI-GASKET Fitting and Related Product Dimensions n enterprise of United McGill orporation - Founded in 1951 One Mission Park Groveport, Ohio 43125-1149 614/836-9981, Fax: 614/836-9843 E-mail: marketing@mcgillairflow.com Web site: http://www.mcgillairflow.com