HDO Series Precision compensated pressure sensors
|
|
|
- Melina Booth
- 5 years ago
- Views:
Transcription
1 FEATURES to, absolute, gage or differential pressure Calibrated and temperature compensated High impedance for low power applications Sm SMD packages RoHS compliant MEDIA COMPATIBILITY To be used with non-corrosive, non-ionic working fluids such as clean dry air, dry gases and the like. SPECIFICATIONS EQUIVALENT CIRCUIT Maximum ratings Supply voltage V S + V DC Lead specifications Average preheating temperature gradient. K/s Soak time ca. min Time above 7 C s Time above C s Time above C s Peak temperature C Cooling temperature gradient -. K/s -Vout +Vs +Vout Temperature ranges Compensated... C (... 7 C on request) Operating -... C Storage -... C Humidity limits (non-condensing)... % RH GND /
2 PRESSURE RANGES SPECIFICATIONS Part number HDOM...P HDOM...P HDOM...P HDOM...P HDOM...P HDOM...P HDOBA...P HDOB(D,G)...P HDOB...P HDOB...P HDOM...H HDOM...H HDOM...H HDOM...H HDOM...H HDOM...H HDOBA...H HDOB(D,G)...H HDOB...H HDOB...H Operating pressure Proof ressure p Burst ressure p Full-scale span M in. T yp a a a a a a Specification notes:. Reference conditions: supply voltage, V S = V DC ; T A = C; RH= %; common mode line pressure = ; pressure applied to high pressure port.. Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage.. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure.. Maximum error band of the offset voltage and the error band of the span, relative to the C reading.. Maximum difference in offset respectively maximum difference in span within the temperature range of...+ C after: a) temperature cycles,...+ C. b). million pressure cycles, psi to full scale span.. Input impedance is the impedance between V S and ground. 7. Output impedance is the impedance between + and - outputs.. This is the common mode voltage of the output arms for V S = V DC. 9. Response time for a zero to full scale span pressure step change, to 9 % rise time.. Long term stability over a one year period.. Proof pressure is the maximum pressure which may be applied without causing durable shifts of the electrical parameters of the sensing element.. Burst pressure is the maximum pressure which may be applied without causing damage to the sensing element or leaks to the housing. /
3 PERFORMANCE CHARACTERISTICS All HDO...P devices (Prime Grade) C haracteristics M in. T yp. Zero pressure offset Unit Combined linearity and hysteresis ±. ±. Temperature effects (... C) Offset ±. ±. Span ±. ±. Repeatability ±. ±. Input impedance devices from > > 7 Output impedance. Common mode voltage.. 7. V DC 9 Response time µsec Long term stability of offset and span. kω ± All HDO...H devices (High Grade) Zero pressure offset C haracteristics M in. T yp. devices up to Unit Combined linearity and hysteresis ±. ±. Temperature effects (... C) Offset ±. ±. Span ±. ±. Repeatability ±. ±. Input impedance devices from > > 7 Output impedance. Common mode voltage.. 7. V DC 9 Response time µsec Long term stability of offset and span. kω ± /
4 PHYSICAL DIMENSIONS AND ELECTRICAL CONNECTIONS Different housing options are available on request. Please contact First Sensor. HDO...E... (SMD, ports same side) marking Ø High pressure port. Connection +Vout GND -Vout I / C* +Vs I / C* * Internal connection. Do not connect for any reason The polarity indicated is for pressure applied to high pressure port (forward gage) first angle projection dimensions in mm HDO...Y... (SMD, port axial) marking Ø.9 Connection +Vout GND -Vout I / C* +Vs I / C* * Internal connection. Do not connect for any reason Pressure port is in forward gage configuration...9 first angle projection dimensions in mm /
5 ORDERING INFORMATION Options Example: Series HDO M Pressure range M M M M M B Pressure mode Housing Porting Grade A* A bsolute E* SMD, ports Straight H High D Differentia l same side P Prime G G age Y* * ( BA) a B B * only available from SMD, port axial * standard for differential devices, "D" ** standard for absolute and gage devices, "A" and "G" HDO M G Y P Devices highlighted in grey are preferred stock items First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. /
HCL Series Miniature compensated low pressure sensors
FEATURES 0... 5 to 0... 5, differential or gage Calibrated and temperature compensated Matched pressure volumes Miniature SMT and SIL housings RoHS compliant SPECIFICATIONS Maximum ratings EQUIVALENT CIRCUIT
HRO Series Precision compensated pressure sensors
Precision compensated sensors FEATURES to, O to, differential Precision temperature compensated Calibrated offset and span RoHS compliant Quality Management System according to ISO 8:00 and ISO 0:008 MEDIA
RCO Series Precision compensated pressure sensors
FEATURES 0...0 m to 0..., to 0, differential, gage or absolute Temperature compensated Calibrated zero and span High for low power applications Sensortechnics PRO services MEDIA COMPATIBILITY To be used
RDO Series Precision compensated pressure sensors
FEATURES 0...0 to, inch H O to 0...00, differential, gage or absolute Temperature compensated Calibrated zero and span High impedance for low power applications Sm DIP packages Sensortechnics PRO services
HMA Series Amplified pressure sensors
FEATURES 00 to 0 bar, to 0 psi gage or differential pressure Increased media compatibility Analog output Precision ASIC signal conditioning Calibrated and temperature compensated 2 SIL and DIP housings
Amplified Low Pressure Sensors
Amplified Low Pressure Sensors 1 mbar (0.4 In H2O) to 60 In H2O Pressure Sensors Features 0 to 1 mbar to 0 to 60 In H2O Pressure Ranges Ratiometric 4 Output Temperature Compensated Calibrated Zero and
Millivolt Output Pressure Sensors
Millivolt Output Pressure Sensors H-Grade Pressure Sensors Features 0 to 4 H2O to 0 to 100 Pressure Ranges % linearity...high accuracy version Temperature Compensated Calibrated Zero and Span General Description
Amplified Low Pressure Sensors
Amplified Low Pressure Sensors 1 mbar (0.4 In H2O) to 60 In H2O Pressure Sensors Features 0 to 1 mbar to 0 to 60 In H2O Pressure Ranges Ratiometric 4 Output Temperature Compensated Calibrated Zero and
HME Series Amplified pressure sensors
FEATURE 100 to 10, 1 to 10 psi, gage or differential pressure Increased media compatibility 1 Digital PI bus output Precision AIC signal conditioning Calibrated and temperature compensated DIP housings
HCE Series Miniature amplified pressure sensors
FEATURES 10 to 5, absolute, gage or differential pressure Barometric pressure ranges Digital SPI bus and analog output Precision ASIC signal conditioning Calibred and temperure compensed Mched pressure
BTE5000 / PTE5000 / PTU5000 Series Precision differential pressure transmitters
FEATURES 5 mbar to 0 bar, 0. to 50 psi differential pressure...6 or...0 ma Precision temperature compensated and calibrated Rugged aluminium housing Female /8" BSP and /8" NPT fittings MEDIA COMPATIBILITY
BLC Series - Basic Compact Pressure Sensor Series. Introduction
Sensors CoBeam TM Technology. The device provides a high output Features & Applications... signal at a low operating voltage and reduces the overall supply Standard Pressure Ranges... voltage while maintaining
AWM3000 Series Mass flow sensor for gases
FEATURES Ranges 0...30 to 0...±1000 1 or 0...0. to 0... "H O (0... to 0... mbar).. V,..3.7 V, 4...0 ma output Actual mass flow sensing Low differential pressure sensing SERVICE To be used with dry gases
BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters
FETURES to, to differential pressure...6 or... m Precision temperature compensated and calibrated Rugged aluminium housing Female /8" BSP and /8" NPT fittings MEDI CMPTIBILITY Pressure inlet: Non-corrosive,
Low Pressure Sensor Amplified Analog Output SM6295-BCM-S
Low Pressure Sensor Amplified Analog Output SM6295-BCM-S-040-000 FEATURES Pressure range from 0 to 40 cmh 2 O 5.0 V operation Amplified analog output (10 to 90%Vdd) Compensated temperature range: 0 to
SX Series Pressure sensors
FEATURES 0...1 to 0...150 Absolute, differential and gage devices High impedance bridge Low power consumption for battery operation APPLICATIONS Industrial controls Pneumatic controls Medical instrumentation
Small Gage Pressure Sensor
Small Gage Pressure Sensor FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported configuration
Freescale Semiconductor
Freescale Semiconductor Pressure Rev 14, 10/2008 + 10 kpa Uncompensated Silicon Pressure The series silicon piezoresistive pressure sensors provide a very accurate and linear voltage output, directly proportional
Small Absolute Pressure Sensor
Small Absolute Pressure Sensor SM5420E Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 95 millivolt span Constant current or constant voltage drive or non-ported
Medium Pressure Sensor Analog Output
Medium Pressure Sensor Analog Output SM6844-015-A-B-5-S FEATURES Analog pressure calibrated and temperature compensated output Amplified analog output Compensated temperature range: 0 to 85oC Absolute
200 kpa On-Chip Temperature Compensated Silicon Pressure Sensors
Freescale Semiconductor Data Sheet: Technical Data Pressure Document Number: Rev 8, 10/2012 200 kpa On-Chip Temperature Compensated Silicon Pressure The devices series are silicon piezoresistive pressure
Operating Characteristics Table 1. Operating Characteristics (V S = 3.0 Vdc, T A = 25 C unless otherwise noted, P1 > P2) Characteristic Symbol Min Typ
Freescale Semiconductor Pressure Rev 14, 10/2008 + 10 kpa Uncompensated Silicon Pressure Sensors The series silicon piezoresistive pressure sensors provide a very accurate and linear voltage output, directly
Small, Gauge Pressure Sensor
Small, Gauge Pressure Sensor SM5G-GG Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported
ORDERING INFORMATION # of Ports Pressure Type Device Name
Rev 13, 10/2008 10 kpa On-Chip Temperature + Compensated and Calibrated Silicon Pressure The series silicon piezoresistive pressure sensors provide a very accurate and linear voltage output directly proportional
OEM Silicon Pressure Die
OEM Silicon Pressure Die SM9520 Series FEATURES High volume, cost effective Gauge configuration Constant current or constant voltage drive Millivolt output Available in 0.15, 0.60 & 1.50 PSIG full-scale
Smartec Pressure Sensor (bridge output)
DATASHEET Pressure sensor family 1/5 Smartec Pressure Sensor (bridge output) Features * Commercial grade * DIP version for high volume production * Gauge or absolute pressure * Resistive bridge technology
Temperature Compensation for MEAS Pressure Sensors
INTRODUCTION Advancements in microelectronic technology have pushed silicon sensors not only toward greater sophistication and lower functional cost but also in the direction of higher performance. The
LME series digital low differential pressure sensors
The LME differential low pressure sensors are based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. The innovative LME technology features superior sensitivity
10 kpa On-Chip Temperature Compensated & Calibrated Silicon Pressure Sensors
Freescale Semiconductor Technical Data 10 kpa On-Chip Temperature Compensated & Calibrated Silicon Pressure The /MPXV2010G series silicon piezoresistive pressure sensors provide a very accurate and linear
SM98A Harsh Media Backside Absolute Pressure Series
SM98A Harsh Media Backside Absolute Pressure Series SM98A Series FEATURES Pressure Range: 10 Bar (145 PSIA), 20 Bar (290 PSIA) On-Board temperature sensing diode Small die (1.2 mm x 1.33 mm) Backside entry
ATS177. General Description. Features. Applications. Ordering Information SINGLE OUTPUT HALL EFFECT LATCH ATS177 - P L - X - X
Features General Description 3.5V to 20V DC operation voltage Temperature compensation Wide operating voltage range Open-Collector pre-driver 25mA maximum sinking output current Reverse polarity protection
ATS276 X - P X - B - X. Lead Free L : Lead Free G : Green
Features General Description On-Chip Hall Sensor with Two Different Sensitivity and Hysteresis Settings for ATS276 3.5V to 2V Operating Voltage 4mA (avg.) Output Sink Current Built-in Protecting Diode
DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
v A v B V + V v S v A v B K = v S /(V + V K T = N/v S
vs S v A v B V + V v S v A v B K = v S /(V + V K v S N T = N/v S P affiche = P S K T H u etal (S) = 50 µv/kp a P =2 R1 K u etal (K) = 0, 1 SEMICONDUCTOR TECHNICAL DATA Order this document by MPX2200/D
Resistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
Fitting PS P - B - R2
INTERNAL STRUCTURE PS86 (G 3/8) 2 3 FEATURES Solidstate pressure switch with no mechanical moving parts Isolated output via a photo-coupler Switching pressure adjustable and hysteresis band adjustable
200 kpa On-Chip Temperature. Compensated Silicon Pressure Sensors. MPX2200 Series. Pressure. Application Examples. Features. MPX2200 Rev 13, 10/2008
Pressure Rev 13, 10/2008 200 kpa On-Chip Temperature + Compensated ilicon Pressure The series devices are silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output directly
H21A1 / H21A2 / H21A3 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH
HA / HA / HA.07 (.85). (.8) NOTES: 0.9 (6.5) 0. (6.5) 0.5 (.) 0.9 (.0) PACKAGE DIMENSIONS.95 (7.5).7 (6.9) 0.97 (.7) 0.957 (.) 0.7 (.0) 0.57 (.6) D E 0.755 (9.) 0.75 (8.9) 0.9 (.) 0.9 (.0) Ø 0. (.) Ø 0.6
SPECIFICATION. Messrs. DATE 20 June, 2013 No. V AP4, AG4 Pressure Sensor
DATE 20 June, 2013 No. Messrs. SPECIFICATION Model: AP4, AG4 Pressure Sensor Project: Distributor: Preliminary Edition rev. 1.00 This document has a possibility to be revised without notice. Reference:
Differential Pressure Sensor
Differential Pressure Sensor MDP200 Series Features Pressure range up to ±500Pa with high accuracy of ±3.0% m.v. Pressure based on thermal micro-flow measurement Outstanding hysteresis and repeatability
KMT37 Angular Sensor DESCRIPTION
AMR Sensor with 180 period For the use at moderate field strengths High accuracy Reliable SO8-package Qualified for automotive applications DESCRIPTION The KMT37 is a magnetic field sensor based on the
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
Freescale Semiconductor. 100 kpa On-Chip Temperature Compensated Silicon Pressure Sensors. MPX2102 Series. Pressure. Application Examples.
Freescale Semiconductor 100 kpa On-Chip Temperature Compensated Silicon Pressure The series devices are silicon piezoresistive pressure sensors providing a highly accurate and linear voltage output directly
Pressure. 1 Fitting PA R - N R2
INTERNAL STRUCTURE (R 1/4) 4 1 2 3 FEATURES High corrosion resistance and drip-proof construction port attachment made of Proven IP-65 grade gauge body (IP-65 in accordance with IEC) Standard product provides
CAL GAUSS CALIBRATION MAGNET
CALIBRATION MAGNET CAL01 CAL01 800 GAUSS CALIBRATION MAGNET Features and Benefits High Field Magnetometer Calibration Calibrates Transverse and Axial Probes High Degree of Stability Accuracy Retained Between
ORDERING INFORMATION # of Ports Pressure Type Option Device Name
Freescale Semiconductor Integrated Silicon Pressure Sensor + On-Chip Signal Conditioned, Temperature Compensated and Calibrated The series piezoresistive transducers are state-of-the-art monolithic silicon
PMF2000 Series DESCRIPTION FEATURES APPLICATIONS MAXIMUM RATINGS MASS AIR FLOW SENSOR
DESCRIPTION PMF2000 features Posifa s third-generation thermal flow die, benefiting from the latest innovations in microfabrication. The sensor die uses a pair of thermopiles to detect changes in temperature
QEB651 Surface Mount Infrared AlGaAs LED
QEB651 Surface Mount Infrared AlGaAs LED Features Wavelength 850nm High output Emission angle 30 o Surface mount miniature package Fast switching RoHS Compliant Package Dimensions Description The QEB651
KMT32B Magnetic Angle Sensor
TDFN SO8 SM8 AMR Sensor with 80 period for the use at moderate field strengths high accuracy tiny TDFN package various packages available DESCRIPTION The KMT3B is a magnetic field sensor based on the anisotropic
Ruggedized Electrical Double Layer Energy Storage Capacitors
Ruggedized Electrical Double Layer Energy Storage Capacitors FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 2.7 V Available in through-hole (radial) version
TAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 3.2x MHz
TAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 3.2x2.5 24.0000MHz MODEL NO.: TX0283D REV. NO.: 1 Revise: Rev. Rev. Page Rev. Account Date Ref. No. Revised by 1 N/A Initial release 4/19/10 N/A C.C. Hsu 2 TAI-SAW
SDT800-STR. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The consists of two phototransistors, each optically coupled to a light emitting diode for DC input operation. Optical coupling between the input IR LED and output phototransistor allows for
ORDERING INFORMATION. # of Ports Pressure Type No. None Single Dual Gauge Differential Absolute
Freescale Semiconductor 200 kpa On-Chip Temperature + Compensated Silicon Pressure The devices series are silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output directly
HTM2500 Temperature and Relative Humidity Module
Hermetic Housing Humidity calibrated within +/-2% @55%RH Temperature measurement through NTC 10kOohms +/- 3% direct output Small size product Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc DESCRIPTION
PLW2835FKB Series. Product Datasheet. General Lighting
PLW2835FKB Series Product Datasheet Tube Lighting Bulb General Lighting Indoor Lighting Signage Introduction The PLW2835FKB series offers ultra-high luminous efficacy combined with the flexibility in design
Optical (2.8) (2.3) PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER
PACKAGE DIMENSIONS 0.97 (.7) 0.957 (.3) 0.7 (.0) 0.57 (.6) Ø 0.33 (3.) Ø 0.6 (3.) (X) 0.9 (6.35) 0.3 (6.5) D E 0.755 (9.) 0.75 (8.9) 0.39 (.00) 0.3 (0.85) 0.9 (3.3) 0.9 (3.0) 0.03 (.60) NOM 0.33 (.0) 0.
Relative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully
TEMPERATURE COMPENSATION FOR MEAS PRESSURE SENSORS APPLICATION NOTE
TEMPERATURE COMPENSATION FOR MEAS PRESSURE SENSORS INTRODUCTION Advancements in microelectronic technology have pushed silicon sensors not only toward greater sophistication and lower functional cost but
PLW5630AGC Series. Product Datasheet. Decorative Light
PLW5630AGC Series Product Datasheet Bulb Down Light Decorative Light Tube Light Track Light Panel Light Introduction Plessey s ultra-high luminous PLW5630AGC SMT LEDs are designed for optical indicators,
PHOTODARLINGTON OPTICAL INTERRUPTER SWITCH
HB HB HB3 PACKAGE DIMENSIONS 0.7 (.0) 0.57 (.6) C L 0.9 (6.35) 0.3 (6.5) D E C L 0.39 (.00) 0.3 (0.85).33 (3.38).073 (.85) 0.9 (3.3) 0.9 (3.0) 0.33 (.0) 0. (0.7) Optical C L 0.5 (3.) 0.9 (3.0).35 (8.00).95
PTC Thermistor:TPM-S Series
SMD PTC Thermistor for Features 1. RoHS & Halogen-free compliant 2. Thermistor chip with lead-free tinned terminals 3. EIA size 0402,0603,0805 4. Fast and reliable response 5. Suitable for reflow soldering
AN3002 Thermocouple measurement
AN3002 Thermocouple measurement This application note illustrates the correct measurement of thermocouple sensors. Contents 1 Introduction......................................... 3 2 Test configuration....................................
PLW2835ACC Series. Product Datasheet. Bulb Wall Light Floor Lamp Tube Lighting
V.8/17 PLW2835ACC Series Product Datasheet Bulb Wall Light Floor Lamp Tube Lighting General Lighting Introduction The PLW2835ACC series offer ultra-high luminous efficacy combined with the flexibility
KMT32B Magnetic Angle Sensor
TDFN SO8 AMR Sensor with 80 period high accuracy high resolution for the use at moderate field strengths tiny TDFN package ROHS & REACH compliant DESCRIPTION The KMT3B is a magnetic field sensor based
NTC Thermistor for Automotive: TTC3-C Series
Features 1. Qualification based on AEC-Q200 Rev-D 2. RoHS compliant 3. Halogen-Free(HF) series are available 4. Body size: Ф3mm 5. Operating temperature range: -55 ~+150 Recommended Applications 1. Car
Model TS318-11C55 Thermopile Sensor
Thermopile IR-Sensor For Contactless Temperature Measurement Single Element Small Package for Ear Thermometer High Signal Flat Filter Accurate Reference Sensor DESCRIPTION Thermopiles are mainly used for
NTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
5A Low Dropout Linear Regulator
Solved by SP084 TM 5A Low Dropout Linear Regulator TO-- features INPUT Low Dropout oltage:. Typically at 5A Current Limiting and Thermal Protection Output Current: 5A Current Limit:.5A Operating Junction
Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage
Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 3.0 V Available in through-hole
PLW2835EKA Series. Product Datasheet. Floor Light
PLW2835EKA Series Product Datasheet Bulb Wall Light Floor Light Tube Light General Lighting Introduction The PLW2835EKA series offer ultra-high luminous efficacy combined with the flexibility in design
Operating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
STATIC GAS MONITOR Type SGM/DEW Revision A of 20 aprile 2016
APPLICATIONS Moisture monitoring of air or gas (SF6) Suitable for indoor or outdoor Industrial, medical or aerospace fields HIGHLIGHTS High voltage circuit breakers commonly used for distribution and transmission
PHOTOVOLTAIC SOLID-STATE RELAY OPTOCOUPLERS
PACKAGE SCHEMATIC ANODE 6 DRAIN 6 CATHODE 2 5 6 N/C 3 4 DRAIN DESCRIPTION The HSR32 and HSR42 devices consist of a AlGaAs infrared emitting diode optically coupled to a power MOSFET detector which is driven
ic-wg BLCC WGC OPTO ENCODER PACKAGE SPECIFICATION
Rev D1, Page 1/5 ORDERING INFORMATION Type Package Options Order Designation ic-wg BLCC WGC none ic-wg BLCC WGC ic-wg BLCC WGC reticle ic-wg BLCC WGC-WG1R WG1R Code Disc 13bit-Gray +2048 PPR A/B, d 44mm
PLW3030EMB Series. Product Datasheet. Flood Light
PLW3030EMB Series Product Datasheet Street Light Flood Light High Bay Introduction Plessey EMC heat-resistant PLW3030EMB SMT LEDs are designed for linear tubes, spot lights, bulb replacements and other
HTS2030SMD Temperature and Relative Humidity Sensor
Miniature Surface mount SMD package Lead free component Patented solid polymer structure Suitable for linear voltage or frequency output circuitry Fast response time and very low temperature coefficient
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 60 bar Output
Power Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
AA2214VRBXS/A-TR-AMT 2.2 x 1.4 mm Surface Mount LED Lamp
2.2 x 1.4 mm Surface Mount LED Lamp DESCRIPTIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use
RIGHT ANGLE SURFACE MOUNT INFRARED PHOTOTRANSISTOR
PACKAGE DIMENSIONS.16 (3.).11 (.8).43 (1.1).3 (.9) FRONT. (.).87 (.).71 (1.8).39 (1.).87 (.).71 (1.8) TOP.3 (.9) R.17 (.4) COLLECTOR MARK 1 NOTE:.16 (.4) BACK 1. Emitter. Collector 3. Tolerance of ±.1
HIGH VOLTAGE HALL EFFECT LATCH General Description. Features. Applications
General Description The is an integrated Hall sensor with output driver designed for electronic commutation of brushless DC motor applications. The device includes an onchip Hall sensor for magnetic sensing,
Metal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION 1 SIP-3 The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed
THM80X Series Feature Application. Temperature & Humidity / Flow Measuring Specialist
THM80X Series Feature Application IP67 protection degree, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Linear adjustment temperature & humidity by computer,
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SG02FU IN A GND
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SG02FU 2 Input NOR Gate Features High-level output current: I OH /I OL = ±8 ma (min) at = 3.0 High-speed operation: t pd = 2.4 ns (typ.) at
HTS2030SMD Temperature and Relative Humidity Sensor
DESCRIPTION Miniature Surface mount SMD package Lead free component Patented solid polymer structure Suitable for linear voltage or frequency output circuitry Fast response time and very low temperature
CHP4012a98F RoHS COMPLIANT
RoHS COMPLIANT GaAs Monolithic Microwave IC Description The CHP4012a98F is a 6-bit phase shifter monolithic circuit, which integrates a CMOS and TTL compatible interface. It is designed for a wide range
1μA Ultra-Tiny Shunt Voltage Reference
EVALUATION KIT AVAILABLE MAX6069 General Description The MAX6069 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in a 4-bump wafer-level package
ED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
MOC205-M MOC206-M MOC207-M MOC208-M
DESCRIPTION These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic package.
N-channel enhancement mode Field-Effect Transistor (FET) in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package using
Rev. 24 March 29 Product data sheet. Product profile. General description N-channel enhancement mode Field-Effect Transistor (FET) in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Utilizes proven SuperTan
SMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
DS 200P. Electronic Pressure Switch. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: standard: 0. % FSO option: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 0 bar
all stainless steel transducer multimedia compatibility
all stainless steel transducer multimedia compatibility High-Performance Silicon technology LARGE INVENTORY Fast Shipment! 0-0.07 to 0-690 bar 100 mv, 0 to 5 V, and 4 to 20 ma Outputs U 1, 2 & 5 psi Low
Ceramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLECHANNEL: PACKAGE SCHEMATIC N/C V CC + V CC V F + V F 7 V B _ 7 V 0 _ V O _ V 0 V F N/C 4 5 GND + 4 5 GND,,, Pin 7 is not connected in Part Number / DESCRIPTION The /, / and / optocouplers consist
FAN4040 Precision Micropower Shunt Voltage Reference
www.fairchildsemi.com Precision Micropower Shunt Voltage Reference Features Fixed 2.500V, 3.300V and 5.00V s to ±0.1% (25 C) Low output noise Low temperature coefficient to 0ppm/ C Small package Extended
IntraSense TM Series 1-French Wire-Connected Pressure Sensor SMI-1A AAUU
IntraSense TM Series 1-French Wire-Connected Pressure Sensor SMI-1A-48-180-AAUU FEATURES Miniature size: 750 µm 220 µm 75 µm Fits within 1-French catheter products Typical drift