PMF2000 Series DESCRIPTION FEATURES APPLICATIONS MAXIMUM RATINGS MASS AIR FLOW SENSOR
|
|
|
- Lora Ryan
- 5 years ago
- Views:
Transcription
1 DESCRIPTION PMF2000 features Posifa s third-generation thermal flow die, benefiting from the latest innovations in microfabrication. The sensor die uses a pair of thermopiles to detect changes in temperature gradient caused by mass flow, delivering excellent signal-to-noise, and unsurpassed repeatability. The solid state thermal isolation structure on the sensor die eliminates the need for surface cavity or fragile membrane used in competing technologies, making the sensor resistant to clogging and pressure shock. The PMF2000 series includes an analog version PMF2000V and a digital version PMF2000D that supports the I2C protocol. The supported flow rate ranges from 10 sccm to 10 SLM. The sensors are temperature compensated over the temperature range of 0 to 50 C. The linearized output provides maximum flexibility and ease-of-use. APPLICATIONS Oxygen concentrators Nebulizers CPAP equipment Leak detection Spectroscopy Mass flow controller Fuel cell control Environmental monitoring FEATURES Unsurpassed performance in a robust and cost effective package Solid state sensing core (no surface cavity or fragile membrane) resistant to clogging and pressure shock Highly accurate (4% reading typ.) Fast response time (5 ms typ.) Linear output and temperature compensation Long-term stability with minimal null drift MAXIMUM RATINGS Operating Temperature: -25 to 85 C Calibrated Temperature Range: 0 to 50 C Storage Temperature: -40 to 90 C Humidity: 0 to 100% RH, non-condensing Shock: 100 g peak (5 drops, 3 axis) Common Mode Pressure: 25 psi
2 SPECIFICATIONS Test Conditions: Vin=10±0.01VDC, Ta=25 C. Relative Humidity: 40%<RH<60% SPECIFICATIONS MIN TYP MAX UNIT CONDITIONS PMF sccm 1 PMF sccm PMF sccm PMF sccm PMF sccm PMF sccm PMF SLM Output Voltage (V) 2 1 to 5 VDC Null Voltage (V) VDC Output Count (D) 256 to Count Null Count (D) Count Null Drift 0.2 % F.S. Repeatability 0.1 % F.S. Accuracy 3 1% F.S. 0 to 25% F.S. 4% Reading 25 to 100% F.S. Resolution (D) 14 Bit Response Time 4 5 msec Supply Voltage (V) Vdc Supply Voltage (D) Vdc Current ma Wetted Materials Silicon carbide, epoxy, PPE+PE, FR4, and silicone as static seal 1. SLM: standard liter per minute. Standard conditions: 0 C and 1 atmosphere. 2. V refers to the analog version of PMF2000, and D refers to the digital I2C version. 3. Maximum deviation in output from nominal over the entire calibrated flow range and temperature range. Errors include offset, full scale span, linearity, flow hysteresis, repeatability and temperature effects over the compensated temperature range % to 90% rise time of the flow sensor to electrically respond to any mass flow change. May be affected by the pneumatic interface.
3 LINEAR OUTPUT For PMF2000V Flow Rate = [(Vout - 1 V) / 4 V] x Full Scale Flow Rate For example, for PMF2101V full scale flow rate is 200 sccm. When Vout reads 3 V, the Flow Rate is: [(3 V - 1 V)/4V x 200 sccm] =100 sccm For PMF2000D Flow Rate = [(Count - 256) / 15868] x Full Scale Flow Rate For example, for PMF2101D full scale rate is 200 sccm. When digital output reads 10000, the Flow Rate is: [( )/15868 x 200 sccm] = sccm
4 PACKAGE DIMENSIONS PMF2000V 1 OUT 2 Vdd 3 GND Unit: mm PMF2000D 1 OUT 2 Vdd 3 GND 4 SCL 5 SDA
5 ORDERING INFORMATION PART NUMBER PMF2050V PMF2100V PMF2101V PMF2102V PMF2103V PMF2108V PMF2101D PMF2103D SPECIFICATIONS 10 sccm, 1 to 5 V, Linear 30 sccm, 1 to 5 V, Linear 1000 sccm, 1 to 5 V, Linear 2000 sccm, 1 to 5 V, Linear 3000 sccm, 1 to 5 V, Linear 10 SLM, 1 to 5 V, Linear 1000 sccm, I2C, Linear 3000 sccm, I2C, Linear EUROPEAN DISTRIBUTOR BS-rep GmbH Eichertstr. 68, D Weibern, Germany Tel: +49 (0) 2655 / info@sensor-rep.de
Differential Pressure Sensor
Differential Pressure Sensor MDP200 Series Features Pressure range up to ±500Pa with high accuracy of ±3.0% m.v. Pressure based on thermal micro-flow measurement Outstanding hysteresis and repeatability
SPECIFICATION. Messrs. DATE 20 June, 2013 No. V AP4, AG4 Pressure Sensor
DATE 20 June, 2013 No. Messrs. SPECIFICATION Model: AP4, AG4 Pressure Sensor Project: Distributor: Preliminary Edition rev. 1.00 This document has a possibility to be revised without notice. Reference:
MS4525HRD (High Resolution Digital) Integrated Digital Pressure Sensor (24-bit Σ ADC) Fast Conversion Down to 1 ms Low Power, 1 µa (standby < 0.15 µa)
Integrated Digital Pressure Sensor (24-bit Σ ADC) Fast Conversion Down to 1 ms Low Power, 1 µa (standby < 0.15 µa) Supply Voltage: 1.8 to 3.6V Pressure Range: 1 to 150 PSI I 2 C and SPI Interface up to
Low Pressure Sensor Amplified Analog Output SM6295-BCM-S
Low Pressure Sensor Amplified Analog Output SM6295-BCM-S-040-000 FEATURES Pressure range from 0 to 40 cmh 2 O 5.0 V operation Amplified analog output (10 to 90%Vdd) Compensated temperature range: 0 to
HMA Series Amplified pressure sensors
FEATURES 00 to 0 bar, to 0 psi gage or differential pressure Increased media compatibility Analog output Precision ASIC signal conditioning Calibrated and temperature compensated 2 SIL and DIP housings
Smartec Pressure Sensor (bridge output)
DATASHEET Pressure sensor family 1/5 Smartec Pressure Sensor (bridge output) Features * Commercial grade * DIP version for high volume production * Gauge or absolute pressure * Resistive bridge technology
HTM2500 Temperature and Relative Humidity Module
Hermetic Housing Humidity calibrated within +/-2% @55%RH Temperature measurement through NTC 10kOohms +/- 3% direct output Small size product Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc DESCRIPTION
HCL Series Miniature compensated low pressure sensors
FEATURES 0... 5 to 0... 5, differential or gage Calibrated and temperature compensated Matched pressure volumes Miniature SMT and SIL housings RoHS compliant SPECIFICATIONS Maximum ratings EQUIVALENT CIRCUIT
HDO Series Precision compensated pressure sensors
FEATURES to, absolute, gage or differential pressure Calibrated and temperature compensated High impedance for low power applications Sm SMD packages RoHS compliant MEDIA COMPATIBILITY To be used with
Millivolt Output Pressure Sensors
Millivolt Output Pressure Sensors H-Grade Pressure Sensors Features 0 to 4 H2O to 0 to 100 Pressure Ranges % linearity...high accuracy version Temperature Compensated Calibrated Zero and Span General Description
DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
ADVANCED INFORMATION MS4525HRD (High Resolution Digital)
Integrated Digital Pressure Sensor (24-bit Σ ADC) Fast Conversion Down to 1 ms Low Power, 1 µa (standby < 0.15 µa) Supply Voltage: 1.8 to 3.6V Pressure Range: 1 to 150 PSI I 2 C and SPI Interface up to
Freescale Semiconductor
Freescale Semiconductor Pressure Rev 14, 10/2008 + 10 kpa Uncompensated Silicon Pressure The series silicon piezoresistive pressure sensors provide a very accurate and linear voltage output, directly proportional
LME series digital low differential pressure sensors
The LME differential low pressure sensors are based on thermal flow measurement of gas through a micro-flow channel integrated within the sensor chip. The innovative LME technology features superior sensitivity
ED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
DATA SHEET. Thermocouple module with digital I²C-Interface - THMOD-I²C. Characteristic features. Areas of application. Features.
Description Characteristic features Industrial temperature measuring method Wide measuring range, -270...+1360 C Digital I²C-interface Simple integration to micro-controller Scope of supply with thermocouple,
SCB10H Series Pressure Elements PRODUCT FAMILY SPEFICIFATION. Doc. No B
PRODUCT FAMILY SPEFICIFATION SCB10H Series Pressure Elements SCB10H Series Pressure Elements Doc. No. 82 1250 00 B Table of Contents 1 General Description... 3 1.1 Introduction... 3 1.2 General Description...
Medium Pressure Sensor Analog Output
Medium Pressure Sensor Analog Output SM6844-015-A-B-5-S FEATURES Analog pressure calibrated and temperature compensated output Amplified analog output Compensated temperature range: 0 to 85oC Absolute
AWM3000 Series Mass flow sensor for gases
FEATURES Ranges 0...30 to 0...±1000 1 or 0...0. to 0... "H O (0... to 0... mbar).. V,..3.7 V, 4...0 ma output Actual mass flow sensing Low differential pressure sensing SERVICE To be used with dry gases
MS4525HRD (High Resolution Digital)
MS4525HRD (High Resolution Digital) Integrated Digital Pressure Sensor (24-bit Σ ADC) Fast Conversion Down to 1 ms Low Power, 1 µa (standby < 0.15 µa) Supply Voltage: 1.8 to 3.6V Pressure Range: 1 to 150
Amplified Low Pressure Sensors
Amplified Low Pressure Sensors 1 mbar (0.4 In H2O) to 60 In H2O Pressure Sensors Features 0 to 1 mbar to 0 to 60 In H2O Pressure Ranges Ratiometric 4 Output Temperature Compensated Calibrated Zero and
LDE/LME/LMI pressure sensors in bypass configuration for gas flowmeters
1. Introduction 1.1 Mass flow Ṁ and volumetric flow Q A restrictive element in the main channel defines the relationship between gas flow F and differential pressure ( P): F = ƒ ( P) Bypass channel LDE/LME/LMI
Pressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
WEATHER MULTI-SENSOR. Vaisala Weather Transmitter WXT510. Change the Way You Measure Weather
WXT510 WEATHER MULTI-SENSOR Vaisala Weather Transmitter WXT510 Change the Way You Measure Weather Vaisala Weather Transmitter WXT510 The Most Essential of Weather The Vaisala Weather Transmitter WXT510
ᓸᯏ㔚ㆇ ᗵ ℂ ᙥ ޕ ᑞ ᇷ ݾ ᔭ ஃ რऄתᖄ ៰ⷐ ᓸᯏ㔚ᛛⴚ ข ᓸᯏ㔚ㆇ ᗵ ℂ ᧂ น ਯ ᣂᙥ inemo ᘠᕈ㊂
inemo (MEMS)? MEMS = Micro-Electro-Mechanical System, : / ST (THELMA: THick Epitaxial Layer for Microactuators and Accelerometers) THELMA ST ST ST Source: ifixit teardown report inemo 9 : A+M+G [m/sec²]
HME Series Amplified pressure sensors
FEATURE 100 to 10, 1 to 10 psi, gage or differential pressure Increased media compatibility 1 Digital PI bus output Precision AIC signal conditioning Calibrated and temperature compensated DIP housings
HAL501...HAL506, HAL508 Hall Effect Sensor ICs MICRONAS INTERMETALL MICRONAS. Edition May 5, DS
MICRONAS INTERMETALL HAL1...HAL, HAL Hall Effect Sensor ICs Edition May, 1997 1--1DS MICRONAS HAL1...HAL HAL Hall Effect Sensor IC in CMOS technology Common Features: switching offset compensation at khz
BLC Series - Basic Compact Pressure Sensor Series. Introduction
Sensors CoBeam TM Technology. The device provides a high output Features & Applications... signal at a low operating voltage and reduces the overall supply Standard Pressure Ranges... voltage while maintaining
Amplified Low Pressure Sensors
Amplified Low Pressure Sensors 1 mbar (0.4 In H2O) to 60 In H2O Pressure Sensors Features 0 to 1 mbar to 0 to 60 In H2O Pressure Ranges Ratiometric 4 Output Temperature Compensated Calibrated Zero and
HRO Series Precision compensated pressure sensors
Precision compensated sensors FEATURES to, O to, differential Precision temperature compensated Calibrated offset and span RoHS compliant Quality Management System according to ISO 8:00 and ISO 0:008 MEDIA
Pressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
SX Series Pressure sensors
FEATURES 0...1 to 0...150 Absolute, differential and gage devices High impedance bridge Low power consumption for battery operation APPLICATIONS Industrial controls Pneumatic controls Medical instrumentation
RT9403. I 2 C Programmable High Precision Reference Voltage Generator. Features. General Description. Ordering Information.
I 2 C Programmable High Precision Reference Voltage Generator General Description The RT9403 is a high precision reference voltage generating console consisting of three I 2 C programmable DACs. Each DAC
Legacy Calibration of the Automatic Weather Station Model 2 of the United States Antarctic Program
Legacy Calibration of the Automatic Weather Station Model 2 of the United States Antarctic Program G. A. Weidner 2, J. E. Thom 1, and M. A. Lazzara 1 1 Antarctic Meteorological Research Center Space Science
Thermal Analysis Excellence
Thermal Analysis Excellence Sorption Test Systems SPS11-1µ SPSx-1µ High Load SPSx-1µ Advance SPS23-1n Multi-Sample Moisture Sorption Analysis Simple, Accurate and Reliable Sorption Test Systems Moisture
v A v B V + V v S v A v B K = v S /(V + V K T = N/v S
vs S v A v B V + V v S v A v B K = v S /(V + V K v S N T = N/v S P affiche = P S K T H u etal (S) = 50 µv/kp a P =2 R1 K u etal (K) = 0, 1 SEMICONDUCTOR TECHNICAL DATA Order this document by MPX2200/D
TM04N- General Description
N ( CH Capacitive Touch Sensor Module) N -CH Capacitance Touch Sensor Module with Differential Sensitivity Calibration General Description The N Touch Sensor Module is designed specifically for detecting
The Ordering Code for various standard model Recorders with an AC supply and without any additional options are as follows:
The basic PC software is supplied free with the recorder. There is an additional charge for the extensive Data Acquisition Software supplied with communication of RS-232/422/485 or Ethernet. The Ordering
Paroscientific, Inc. Digiquartz Technology Overview. Paroscientific, Inc.
Digiquartz Technology Overview Quartz Crystal A quartz crystal resonator is the key sensing element in a Digiquartz pressure transducer. Quartz was chosen for the following inherent characteristics: High
ORDERING INFORMATION # of Ports Pressure Type Device Name
Rev 13, 10/2008 10 kpa On-Chip Temperature + Compensated and Calibrated Silicon Pressure The series silicon piezoresistive pressure sensors provide a very accurate and linear voltage output directly proportional
HCE Series Miniature amplified pressure sensors
FEATURES 10 to 5, absolute, gage or differential pressure Barometric pressure ranges Digital SPI bus and analog output Precision ASIC signal conditioning Calibred and temperure compensed Mched pressure
High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035
19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options
SPECIFICATIONS FOR COB SERIES WHITE LED
SPECIFICATIONS FOR COB SERIES WHITE LED Model:Metal COB SERIES LIGHTNING Customer Part No:TMN1-16-xxxx-5802AA0 DATE: 2018/11/05 REV. No.: VERSION A00 1 Features: * Compact high flux density light source
Silicon Capacitive Accelerometers. Ulf Meriheinä M.Sc. (Eng.) Business Development Manager VTI TECHNOLOGIES
Silicon Capacitive Accelerometers Ulf Meriheinä M.Sc. (Eng.) Business Development Manager VTI TECHNOLOGIES 1 Measuring Acceleration The acceleration measurement is based on Newton s 2nd law: Let the acceleration
Hydraulic Pressure NAH Applications. Features. New generation available - refer to
NAH 8 Hydraulic Pressure Transmitter New generation available - refer to www.trafag.com/h70 Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for
3.3V Power Supply Isolated Current Sensor with Common Mode Field Rejection
Fully Integrated Current Sensor IC 3.3V Power Supply Isolated Current Sensor with Common Mode Field Rejection Description The Senko Micro s provides economical and precise solutions for AC or DC current
PGA309 Programmable Sensor Signal Conditioner. Bringing Linearity to a Non-Linear Pressure Sensor World
PGA309 Programmable Sensor Signal Conditioner Bringing Linearity to a Non-Linear Pressure Sensor World Typical Wheatstone Bridge Pressure Sensor Bridge Resistance is Symmetrical Pressure Sensor Terminology
Isolated Current Sensor with Common Mode Field Rejection
Fully Integrated Current Sensor IC Isolated Current Sensor with Common Mode Field Rejection Description The Senko Micro s SC810 provides economical and precise solutions for AC or DC current sensing in
Operating Characteristics Table 1. Operating Characteristics (V S = 3.0 Vdc, T A = 25 C unless otherwise noted, P1 > P2) Characteristic Symbol Min Typ
Freescale Semiconductor Pressure Rev 14, 10/2008 + 10 kpa Uncompensated Silicon Pressure Sensors The series silicon piezoresistive pressure sensors provide a very accurate and linear voltage output, directly
Model TS105-10L5.5mm Thermopile Sensor
Thermopile IR-Sensor For Contactless Temperature Measurement Single Element For Industrial Pyrometers Silicon Lens Accurate Reference Sensor DESCRIPTION Thermopiles are mainly used for contactless temperature
Fitting PS P - B - R2
INTERNAL STRUCTURE PS86 (G 3/8) 2 3 FEATURES Solidstate pressure switch with no mechanical moving parts Isolated output via a photo-coupler Switching pressure adjustable and hysteresis band adjustable
Alfa-MOS Technology. AF V / 50mA Linear LED Driver
General Description The is a linear LED driver. The application of high bright LED is widely used for general illumination. The maximum output current is 50mA. Typical variations is % in V IN = 6 ~ 500V
Automated multi-vapor gravimetric sorption analyzer for advanced research applications
Automated multi-vapor gravimetric sorption analyzer for advanced research applications Automated multi-vapor gravimetric sorption analyzer for advanced research applications Key benefits of the DVS Advantage
473-SHX Dew Point Mirror
Humidity and Temperature Reference Hygrometer For Temperature up to 125 C Precise and stable chilled mirror dew point mirror technology High temperature optical components High temperature sample fan Cable
Pressure. 1 Fitting PA R - N R2
INTERNAL STRUCTURE (R 1/4) 4 1 2 3 FEATURES High corrosion resistance and drip-proof construction port attachment made of Proven IP-65 grade gauge body (IP-65 in accordance with IEC) Standard product provides
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
Small, Gauge Pressure Sensor
Small, Gauge Pressure Sensor SM5G-GG Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported
CTC 155 / 350 / 660 Dry-block calibrator
CTC 155 / 350 / 660 Dry-block calibrator Wide temperature range: CTC-155: -25 to 155 C CTC-350: 28 to 350 C CTC-660: 28 to 660 C Fast calibration External reference sensor External sensor control Easy
E8EB-N0C2B E8EB-N0B2B
Slim Sensor CSM DS_E 1 Ideal for Workpiece Position and Original Checking The to 1 kpa model can be used for workpiece position checking. The to 1MPa model is ideal for original pressure checking. Degree
Precision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References
19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
Ultra-Low-Power Series Voltage Reference
19-257; Rev 2; 3/5 Ultra-Low-Power Series Voltage Reference General Description The micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
Description. Features. Absolute Maximum Ratings (T A =25 C) Thermal Data. Schematic Diagram & Equivalent Circuit. 7805AJ Pin Assignment
Description The can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each employs internal current limiting, thermal shut-down and safe operating
FATEK. FBs-1HLC. Precision Load Cell Module. Operation manual V1.1 06/07/2017 FATEK AUTOMATION CORP.
FATEK FBs-1HLC Precision Load Cell Module Operation manual V1.1 06/07/2017 FATEK AUTOMATION CORP. 1 Contents Chapter 1 1HLC module introduction... 3 1.1 Module specification... 3 1.2 Module appearance
STATIC GAS MONITOR Type SGM/DEW Revision A of 20 aprile 2016
APPLICATIONS Moisture monitoring of air or gas (SF6) Suitable for indoor or outdoor Industrial, medical or aerospace fields HIGHLIGHTS High voltage circuit breakers commonly used for distribution and transmission
HTS2030SMD Temperature and Relative Humidity Sensor
Miniature Surface mount SMD package Lead free component Patented solid polymer structure Suitable for linear voltage or frequency output circuitry Fast response time and very low temperature coefficient
(PT-A6) Visible Light Detector for Security Lighting
Version: July 4, 2017 (PT-A6) Visible Light Detector for Security Lighting Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu
3mm Photodiode PD204-6B
3mm Photodiode Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
DSL800480STMQWTA0 LCD-Display 7 TFT Active Matrix with White LED Backlight & Touch Panel
1. Features 7 inch module is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel,
(PT-A6) Visible Light Detector for Security Lighting
Version: July 31, 2017 Electronics Tech. (PT-A6) Visible Light Detector for Security Lighting Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong
MS BA Altimeter and diving pressure sensor
MS5803-07BA Altimeter and diving pressure sensor Excellent accuracy for both altimeter and diving applications until 70m depth Operating range: 0 to 7 bar, -20 to +85 C High resolution module, 0.4m air
AME, Inc. 5A Low Dropout AME1084 Positive Voltage Regulator General Description Functional Block Diagram Input Current Limiting
General Description Functional Block Diagram The is a 5A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage versions. Overcurrent and thermal protection are
Isolated Current Sensor with Common Mode Field Rejection
Fully Integrated Current Sensor IC Isolated Current Sensor with Common Mode Field Rejection Description The SENKO SC820 provides economical and precise solutions for AC or DC current sensing in industrial,
MAX31855 Cold-Junction Compensated Thermocouple-to-Digital Converter
19-5793; Rev 0; 3/11 General Description The performs cold-junction compensation and digitizes the signal from a K, J, N, T, or E type thermocouple. (Contact the factory for S and R type thermocouples.)
10 kpa On-Chip Temperature Compensated & Calibrated Silicon Pressure Sensors
Freescale Semiconductor Technical Data 10 kpa On-Chip Temperature Compensated & Calibrated Silicon Pressure The /MPXV2010G series silicon piezoresistive pressure sensors provide a very accurate and linear
HT75XX-2 100mA Low Power LDO
100mA Low Power LDO Features Low power consumption Low voltage drop Low temperature coefficient High input voltage (up to 24V) High output current : 100mA Output voltage accuracy: tolerance 1% TO92 SOT89
Institute for Electron Microscopy and Nanoanalysis Graz Centre for Electron Microscopy
Institute for Electron Microscopy and Nanoanalysis Graz Centre for Electron Microscopy Micromechanics Ass.Prof. Priv.-Doz. DI Dr. Harald Plank a,b a Institute of Electron Microscopy and Nanoanalysis, Graz
Introduction to Blackbody Sources
Introduction to s This section contains dedicated blackbody sources for low uncertainty calibration of infrared thermometers. A range of portable primary blackbody sources combine high emissivity with
RoHS. Versatile. X g. X 2 e
s IN8, - and The inclinometers of the IN8 series allow measuring inclinations in the range of ±85 or -dimensional inclinations up to 0. With their high robustness, their protection level up to max. IP9k
LM34 Precision Fahrenheit Temperature Sensors
1 Precision Fahrenheit Temperature Sensors 1 Features 3 Description 1 Calibrated Directly in Degrees Fahrenheit The series devices are precision integratedcircuit temperature sensors, whose output voltage
MS BA01. PHT Combination Sensor SPECIFICATIONS
SPECIFICATIONS Integrated pressure, humidity and temperature sensor QFN package 5 x 3 x 1 mm 3 Operating range: 10 to 2000 mbar, 0%RH to 100%RH, -40 to 85 C High-resolution module: 0.016 mbar, 0.04%RH,
Product Description. TMP01: Low Power, Programmable Temperature Controller (Temperature Sensor)
TMP0: Low Power, Programmable Temperature Controller (Temperature Sensor) Product Description The TMP0 is a temperature sensor which generates a voltage output proportional to absolute temperature and
MAU200 Series. 1W, High Isolation SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
Component Distributors, Inc. ~ www.cdiweb.com ~ sales@cdiweb.com ~ -0--33 W, High Isolation SIP, Single & DC/DC s Key Features Efficiency up to 00 Isolation MTBF >,000,000 Hours Low Cost Input, and Output
New Die Attach Adhesives Enable Low-Stress MEMS Packaging
New Die Attach Adhesives Enable Low-Stress MEMS Packaging Dr. Tobias Königer DELO Industrial Adhesives DELO-Allee 1; 86949 Windach; Germany Tobias.Koeniger@DELO.de Phone +49 8193 9900 365 Abstract High
ic-wg BLCC WGC PACKAGE SPECIFICATION
Rev B1, Page 1/5 ORDERING INFORMATION Type Package Options Order Designation ic-wg BLCC WGC none ic-wg BLCC WGC ic-wg BLCC WGC reticle ic-wg BLCC WGC-WG1R WG1R Code Disc 13bit-Gray +2048 PPR A/B, d 44mm
PG-100 HANDY MANOMETER COPAL ELECTRONICS FEATURES MODEL NUMBER DESIGNATION P G G P. marking Compatible with EMC directive
HANDY MANOMETER Power button Hold button marking Compatible with EMC directive Digital 3 1/2 digits Zero adjustment VR FEATURES Excellent stability State of the art sensor and circuit technology guarantees
Evaluation of Pressure Sensor Performance Dr. Lynn Fuller Webpage:
ROCHESTER INSTITUTE OF TECHNOLOGY MICROELECTRONIC ENGINEERING Evaluation of Pressure Sensor Performance Webpage: http://people.rit.edu/lffeee 82 Lomb Memorial Drive Rochester, NY 14623-5604 Tel (585) 475-2035
MT1101 Series CMOS, Uni-polar, Hall-Effect
CMO, Unipolar, HallEffect Features and Benefits CMO Technology Magnetic Type: Unipolar Wide Operating Voltage Range: upply Voltage 2.8~24V pecified Operating Temperature Range: From 40 ~125 High Magnetic
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1BVW S/08
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1BVW S/08 Introduction The HAH1BVW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications
next generation Welcome to the Dispersion options Smarter particle sizing Your sample, expertly processed and prepared Particle size
Particle size Welcome to the next generation Your sample, expertly processed and prepared Dispersion options 3000 detailed specification sheets from Getting your sample preparation right The US Pharmacopeia
YB Pin Microprocessor Reset Monitor
Introduction The is a cost-effective system supervisor Integrated Circuit (IC) designed to monitor V CC in digital and mixed signal systems and provide a warning signal when the system power supply is
Technical Data Sheet DPT & DPIT-4005 SERIES DIFFERENTIAL PRESSURE TRANSDUCERS. Features. Description
Technical Data Sheet DPT & DPIT-4005 SERIES DIFFERENTIAL PRESSURE TRANSDUCERS Description The 4005 series of differential pressure transducers include Models DPT-4005 and DPIT-4005-M. The 4005 series differential
AND12C285-DHB-KIT 12.1 SVGA Color TFT LCD Module
12.1 SVGA Color TFT LCD Module Features 12.1 SVGA color display with Super High Luminance High Brightness 500cd/m 2 with 4-CCFL sidelight Built-in Long Life Lamps (MTTF:50,000 h) (Condition/Ta:25 C,/ FL
POLYMER Aluminum Electrolytic Capacitors
POLYMER Aluminum Electrolytic Capacitors Murata Manufacturing Co., Ltd.'s series of polymer aluminum electrolytic capacitors are ideal for low ESR, high capacitance applications in a variety of commercial
RDO Series Precision compensated pressure sensors
FEATURES 0...0 to, inch H O to 0...00, differential, gage or absolute Temperature compensated Calibrated zero and span High impedance for low power applications Sm DIP packages Sensortechnics PRO services
Fuel Consumption Measurement Uncertainty How can I evaluate the quality of my measurement results?
Fuel Consumption Measurement Uncertainty How can I evaluate the quality of my measurement results? Romain Lardet Consumption Measurement AVL-List GMBH 1 Content 1. What do we mean by Measurement Uncertainty?
Evaluation of Pressure Sensor Performance Dr. Lynn Fuller
ROCHESTER INSTITUTE OF TECHNOLOGY MICROELECTRONIC ENGINEERING Evaluation of Pressure Sensor Performance Dr. Lynn Fuller Webpage: http://people.rit.edu/lffeee 82 Lomb Memorial Drive Rochester, NY 14623-5604
200 kpa On-Chip Temperature Compensated Silicon Pressure Sensors
Freescale Semiconductor Data Sheet: Technical Data Pressure Document Number: Rev 8, 10/2012 200 kpa On-Chip Temperature Compensated Silicon Pressure The devices series are silicon piezoresistive pressure
MT3451 Series BiCMOS, Latch, Hall-Effect Magnetic Position Sensors
Features and Benefits BiCMOS Technology Magnetic Type: Latch Wide Operating Voltage Range: Supply Voltage 2.8~24V Specified Operating Temperature Range: From -40 ~ 150 High Magnetic Sensitivity B OP =20Gauss,
Miniature Electronically Trimmable Capacitor V DD. Maxim Integrated Products 1
19-1948; Rev 1; 3/01 Miniature Electronically Trimmable Capacitor General Description The is a fine-line (geometry) electronically trimmable capacitor (FLECAP) programmable through a simple digital interface.