BSD MODULFLEX R Torsionally Rigid Couplings
|
|
- Marianna Nash
- 6 years ago
- Views:
Transcription
1 BSD MODULFLEX R Torsionally Rigid Couplings for T1F Torque Flange View B Thread opening turned in sectionel plane b b 6 b 7 b 2 b 8 b 3 b za View A A B NVm 1 NVm View A btot Reference dimension X X 2 NVm 1 knvm 2 knvm NVm 3 knvm knvm 1 knvm Dimensions Nom. Coupling Torque flange T Kmax d H7 zk d K d zm d M d G b tot b b 6 b 7 b 8 X d za d F d B b 2 b 3 b za Y g M8 7 g M g g M k g6 M g M12 2k M k g M12 g M14 k k g M g M18 B6-6. en
2 Technical Data T1F Article number (rated) torque Maximum rotation speed 1) Limit torque Oscillation bandwith (torque) DIN 1 (peak-topeak) Weight of the coupling Mass moment of inertia J (without torque flange) Rotational rigidity C T tot (without torque flange) (rpm) (kg) (kgm 2 ) (1 6 N m/rad) k k k k k 1) The specified values were ascertained in an available machine plant. The maximum rotation speed and resonance s are closely related to the running characteristics and quadratic response of the whole machine plant in which the torque gauging flange and coupling set are used. Note that resonance s may change in accordance with the stable and unstable ratios occurring in different machine plants. Permitted shaft end misalignment Max. permitted axial misalignment of coupling half members Max. permitted radial misalignment of coupling half members Angular displacement, D K W K a (deg.) k 2k 3k k 1k K r The compliance values quoted are maxima when there is compliance in one direction only. If several compliance characteristics are required simultaneously during operation, compliance values are reduced in accordance with diagram 1: Diagram 1 K a Applicable norms and standards: Coupling characteristics in accordance with DIN 74, Part 2, Section 2.1. Loading quantities in accordance with DIN 74, Part 2, Sections 2.2 and 3 (Coupling design for special applications). HBM 2 B6-6. en
3 Diagram: axial and radial displacement N m 1 N m N m 1 N m N m N m. 2 N m N m kn m kn m B6-6. en 3 HBM
4 Diagram: axial and radial displacement (continued) kn m kn m kn m kn m kn m 1 kn m kn m 3 1 kn m HBM 4 B6-6. en
5 General notes on installation The laminated packaging of the couplings must not be overstressed beyond the specified permitted compliance values. Installation position The BSD-MODULFLEX coupling can be operated in any installation position (horizontally or vertically) with the T1F/... torque flange. During vertical operation, ensure that the permitted axial force is not exceeded due to the masses present in the test rig. Delivery state a) If the T1F has been ordered complete with coupling (Code 6: Y; see data sheet B121-x.x en), the coupling will be fitted to the torque flange at HBM. Couplings and the torque flange are individually balanced in accordance with DIN ISO194 quality levels G 2. (coupling) and G 6.3 (torque flange). Screws for connecting the coupling and torque flange are included in the list of components supplied. b) If the T1F has been ordered without coupling (Code 6: N), the coupling may be re-ordered individually. Installation For perfect function it is essential to conform to reference dimension b tot. If the coupling and torque flange are separate when delivered (see delivered status A), you must first fit the coupling to the torque flange before installing the combined unit in the shaft run. Use only screws of the type specified in table 1. (fillister-head screws DIN EN ISO (Nom. 1 kn m DIN EN ISO ), black, oiled, µ tot =.12). Clean the flange and degrease it with a solvent (e.g. acetone). First of all tighten the screws crosswise with half tightening torque. Then tighten them crosswise again with full tightening torque (for tightening torque see table 1). Then install the combined unit in the shaft run. First of all tighten the screws crosswise with half tightening torque. Then tighten them crosswise again with full tightening torque (for tightening torque see table 2). Caution: The connecting screws on the user side must not impede the function of the couplings (see maximum screwed-in depth, table 2). After installation, please check that the couplings are not deformed. 1 Number of screws Fillister head screw DIN EN ISO bk/oiled /m tot =.12 Prescribed tightening torque Weight of screw (kg/piece) M6x M8x M12x k 8 M12x k M14x k M14x4.69 k M18x k M18x (DIN EN ISO ) Table 1: Screws for connecting coupling to torque flange T1F (View B) 1 Number of screws Fastening screws strength class 1.9 Prescribed tightening torque Maximum screwed in depth 4 M M M k 1. 2 k M k M k 16 1 k M Table 2: Fastening screws for coupling and test rig (View A) More notes on fitting can be found in the mounting instructions for the T1F torque flange. B6-6. en HBM
6 Modifications reserved. All details describe our products in general form only. They are not to be understood as express warranty and do not constitute any liability whatsoever. B6-6. en Hottinger Baldwin Messtechnik GmbH Im Tiefen See 4, D Darmstadt, Germany Tel.: ; Fax: E mail: support@hbm.com
T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en
T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission
More informationTOP Transfer. Data Sheet. Force transfer standard. Special characteristics. D 20.TOPTRANS.10 en
TOP Transfer Force transfer standard Data Sheet Special characteristics Ultimate precision force transducer for international comparative measurements Tensile/compressive force transducer Nominal forces
More informationTOP Transfer. Data sheet. Force transfer standard. Special features. B en
TOP Transfer Force transfer standard Data sheet Special features - Force transducer with ultimate precision for international comparison measurements - Tensile/compressive force transducer - Nominal forces
More informationTB2. Data Sheet. Torque reference transducer. Special features. B en
T2 Torque reference transducer Data heet pecial features tandard version ptional: rotection I67 - ccuracy class 0.03 - s 100 m, 200 m, 500 m, 1 k m, 2 k m, 3 k m, 5 k m and 10 k m - High permissible oscillation
More informationZ7A. Load cells. Special features. Data sheet. Wiring code
Z7A Load cells Special features - Complies with OIML R60 regulations up to 3000 d - Max. capacities: 500 kg... 10 t - Fulfills EMC requirements in accordance to EN 45 501 - Low transducer height - Robust
More informationLexium integrated drives
Presentation GBX planetary gearbox Presentation In many cases the axis controller requires the use of a planetary gearbox for adjustment of speed of rotation and torque; the accuracy required by the application
More informationLinear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.
Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)
More informationBacklash-free Torque Limiting Clutches
ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs
More informationBacklash-free Safety Couplings. pioneer in innovation
Backlashfree Safety Couplings pioneer in innovation T h e m o d u l a r s y s t e m s a t i s f i e s a l l y o u r w i s h e s! Edition 8/007 G E R W A H T h e C o m p a n y GERWAH GmbH was founded in
More informationBacklash-free Safety Couplings
Backlashfree Safety Couplings You Can Rely On Us! T h e m o d u l a r s y s t e m s a t i s f i e s a l l y o u r w i s h e s! Edition /00 G E R W A H T h e C o m p a n y GERWAH GmbH was founded in 19.
More informationDigital AC Motors MHD
Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric
More informationIdentification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )
Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive
More informationZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors
ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron
More informationTSCHAN S US Elastische Kupplungen Flexible Couplings TNS Flexible Couplings. Partner for Performance
US 11 2015 TSCHAN S Elastische Kupplungen Flexible Couplings TNS Flexible Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today
More informationINVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE
IMEKO 23 rd TC3, 13 th TC5 and 4 th TC22 International Conference 30 May to 1 June, 2017, Helsinki, Finland INVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE
More informationActuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT
Actuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT Product overview Actuators with ball monorail guidance system and ball screw drive Actuators with ball monorail
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationAPEX DYNAMICS, INC. Staianless
APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer
More informationStress Analysis Lecture 3 ME 276 Spring Dr./ Ahmed Mohamed Nagib Elmekawy
Stress Analysis Lecture 3 ME 276 Spring 2017-2018 Dr./ Ahmed Mohamed Nagib Elmekawy Axial Stress 2 Beam under the action of two tensile forces 3 Beam under the action of two tensile forces 4 Shear Stress
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationApplying the Wheatstone Bridge Circuit
Applying the Wheatstone Bridge Circuit by Karl Hoffmann W1569-1.0 en Applying the Wheatstone Bridge Circuit by Karl Hoffmann Contents: 1 Introduction...1 2 Elementary circuits with strain gages...5 2.1
More informationLightweight. Geislinger Gesilco
Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes
More informationParameter Design of High Speed Coupling for 6 MW Wind Turbine Considering Torsional Vibration
Parameter Design of High Speed Coupling for 6 MW Wind Turbine Considering Torsional Vibration JongHun Kang 1, Junwoo Bae 2, Seungkeun Jeong 3, SooKeun Park 4 and Hyoung Woo Lee 1 # 1 Department of Mechatronics
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
More informationThe perfect Torque Limiting Clutch for
The perfect Torque Limiting Clutch for Machine Tools Packaging Machinery Printing and Paper Machinery Automated Systems Power Transmission compact, backlash-free torque limiting clutch Immediate disengagement
More informationsecond PLSA line R310EN 3308 ( )
01_1 Planetary st Headline_36 Screw Assemblies pt/14.4 mm second PLSA line R310EN 3308 (2011-09) 2 Planetary Screw Assemblies PLSA Planetary Screw Assemblies PLSA Product Overview 3 Nuts, Screws, Screw
More informationIncreased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them
B 3.1 Increased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them Dr. Schäfer, André Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45, 64293 Darmstadt andre.schaefer@hbm.com
More informationROTARY MOTION CONTROL
ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation
More informationOur classic for extreme parallel offset: Standard S series. The Schmidt-Kupplung compensates variable parallel Symbiosis of performance, com-
Schmidt-Kupplung Power Plus SK_PP_/0 The Schmidt-Kupplung series Schmidt-Kupplung Our classic for extreme parallel offset: Standard S series The Schmidt-Kupplung compensates variable parallel Symbiosis
More informationHPG xxx 030 C1 C2 C3. High performance angle gearboxes. Output. Input. Drawings. C with option motor flange. View x. Centering View y.
HPG 030 1 2 3 Input Output 1 View M6 ( deep) 0 Ø4 H (2.2 deep) 18.0 M6 ( deep) 0 2 3 M6 ( deep) 2 13.0 4 2.0 18.0 24.0 M Ø12 k6 6 M6 ( deep) M6 ( deep) 3 Eample HPG 030 2 with option motor flange 0 M6
More informationSTRUCTURE DESCRIPTION
Telescopic Lightning Protection Mast Height = 24,85 m above floor Part No. 103 025 Type with flange plate Design acc. DIN 4131 wind zone III (equal to 32,0m/s in EN 1991-1-4) STANDARD USED GENERAL INFORMATION
More informationBenefits/Application. Very high-cycle fatigue resistant up to 80 % of nominal load. Easy assembling, lots of possibilities. Options/Accessories
D a t a s h e e t T o r q u e T r a n s d u c e r S e r i e s M ( 2 N m 1 0 0 0 0 N m ) Benefits/Application For static and dynamic moments Non-rotational construction Very high-cycle fatigue resistant
More informationStrain Gauges and Accessories
Strain Gauges and Accessories Nurgül Er nurguel.er@hbm.com www.hbm.com 19.03.2008, Folie 1 Hottinger Baldwin Messtechnik GmbH Nurgül Er How to find the right strain gauge a wide range of of strain gauges
More informationWelcome to where precision is. Large Ball Screws Diameter mm
Welcome to where precision is. Large Ball Screws Diameter mm Large Ball Screws Diameter mm This section includes nuts with standard dimensions per ISO 8 / DIN 1. In most cases, there is a choice of three
More informationAPEX DYNAMICS, INC. Staianless
APE DYNAMICS, INC. HIGH PRECISION HIGH SPEED PLANETARY GEARBOES AF / AFR Series Staianless High precision high speed planetary gearboxes AF / AFR series Apex Dynamics, Inc. is the world s most productive
More informationDynamic Tests on Ring Shear Apparatus
, July 1-3, 2015, London, U.K. Dynamic Tests on Ring Shear Apparatus G. Di Massa Member IAENG, S. Pagano, M. Ramondini Abstract Ring shear apparatus are used to determine the ultimate shear strength of
More information3B SCIENTIFIC PHYSICS
3B SCIENTIFIC PHYSICS Torsion Apparatus 1018550 Torsion Apparatus Supplement Set 1018787 Instruction manual 11/15 TL/UD 1. Description The torsion equipment is designed for determining the torsion coefficient
More informationBenefits/Application. Very high-cycle fatigue resistant up to 100 % of nominal load. Extremely robust against side forces and bending moments
Data sheet Force transducer Series RF-I (160 kn 4000 kn) Benefits/Application Accuracy class 0,05 For static and dynamic tensile and compressive forces Very high-cycle fatigue resistant up to 100 of nominal
More informationDimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial
Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach
More informationTurbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
More informationDRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationD a t a s h e e t. F o r c e T r a n s d u c e r. S e r i e s K. ( 4 k N k N ) Benefits/Application. Options/Accessories
D a t a s h e e t F o r c e T r a n s d u c e r S e r i e s K ( k N 6 3 0 k N ) Benefits/Application For static and dynamic tensile and compressive forces Hermetically sealed Very small force application
More informationInstruction for use Plunger Probes M FB and M78-Plus
Instruction for use Plunger Probes M5678-78FB and M78-Plus Rev 3 (10/2012) DIATEST Plunger Probe M5678-68FB Self-centering interior measuring gauge for bore diameter from 19,5 to 330 mm Design A plunger
More informationRubber- and cellular buffers
Rubber- and cellular buffers Rubber- and cellular buffers Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane Rail Wheels Rail
More informationCam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationCooler-Bypass Thermostat Valve, Size 10
Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,
More informationUS Safety Couplings. Partner for Performance
US 05 2016 Safety Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we mean and mean what
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationLoad cell. Special features. Data sheet
Z6 Load cell Special features - Welded on metal bellows - (rated) loads: 5 kg 1 t - Load cells and installation aids made of rust resistant materials - Verifiable up to 6000 divisions, test report as per
More informationPlanetary Screw Assemblies PLSA
Planetary Screw Assemblies PLSA R310EN 3308 (2011-09) The Drive & Control Company C/ Centauro, 13 Área Empresarial Las Cubiertas 28971-Griñón (Madrid) T. 0034 91 126 6627 info@diversiatec.com www.diversiatec.com
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationHRN/HRN-C Series Hydraulic Vane Rotary Actuators
HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12
More informationData Sheet. Functional Safety Characteristic Safety Values for BE.. Brakes * _0715*
Drive Technology \ Drive Automation \ System Integration \ Services *22291814_0715* Data Sheet Functional Safety Characteristic Safety Values for BE.. Brakes Edition 07/2015 22291814/EN SEW-EURODRIVE Driving
More informationTHE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY
THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY D. Peschel 1, D. Mauersberger 1, D. Schwind 2, U. Kolwinski 2 1 Solid mechanics department, PTB, Germany 2 Gassmann Theiss Messtechnik
More informationSelection table for guided systems (crank driven)
Selection table for guided systems (crank driven) One mass shaker brute-force system One mass shaker natural frequency system Two mass shaker fast-runner system with reaction force-compensation Single
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationLamp and Control Panel (Lamp Panel)
www.reinhausen.com Lamp and Control Panel (Lamp Panel) Operating Instructions BA 47/0 EN NOTE! Changes may have been made to a product after going to press with this documentation. We expressly reserve
More informationCouplings. highly-flexible ring coupling
product catalogue Couplings GKN Stromag TRIR highlyflexible ring coupling GKN Stromag TRIR highlyflexible ring coupling Special designs (see page 27) > TEF...F RR To connect a flywheel or equivalent to
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. SDA - Spindle direct drive actuator. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria
DRIVETECHNOLOGY ALBERTINKOMA GROUP SDA Spindle direct drive actuator Mascinenfabrik ALBERT GmbH Tecnologiepark A Gampern Austria pone: +/(0)0 fax: +/(0)0 email: office@albert.at internet: www.albert.at
More informationExperiment Instructions. Deformation of Frames
Experiment Instructions SE 0.20 Deformation of Frames Experiment Instructions This manual must be kept by the unit. Before operating the unit: - Read this manual. - All participants must be instructed
More information2. Determine the deflection at C of the beam given in fig below. Use principal of virtual work. W L/2 B A L C
CE-1259, Strength of Materials UNIT I STRESS, STRAIN DEFORMATION OF SOLIDS Part -A 1. Define strain energy density. 2. State Maxwell s reciprocal theorem. 3. Define proof resilience. 4. State Castigliano
More informationElectroMechanical Cylinder LEMC
www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC THE POWER OF KNOWLEDGE ENGINEERING www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC enefits High efficiency
More informationFOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]
FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] Number of the Loading Boundary Dimensions Static Ax.Basic Load Rating Designation Weight Abutment Dimensions Curve d D T C oa G J 1 J 2 N 1 N 2 n 1
More informationPlanetary Screw Assemblies PLSA
Planetary Screw Assemblies PLSA Ernst-Sachs-Straße 100 97424 Schweinfurt Tel. +49 9721 937-0 Fax +49 9721 937-275 www.boschrexroth.com Catalog "Planetary Screw Assemblies PLSA" R310XX 3308 (2014.01) Dear
More informationVIBRATION ANALYSIS OF TIE-ROD/TIE-BOLT ROTORS USING FEM
VIBRATION ANALYSIS OF TIE-ROD/TIE-BOLT ROTORS USING FEM J. E. Jam, F. Meisami Composite Materials and Technology Center Tehran, IRAN jejaam@gmail.com N. G. Nia Iran Polymer & Petrochemical Institute, Tehran,
More informationSLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY
SGL YPE he N slide is a linear motion earing utilizing the rotational motion of all elements along four rows of raceway grooves. It can e used in various applications due to its compactness and high load
More informationData Sheet. Functional Safety Characteristic Safety Values for BE..(FS) Brakes * _0715*
Drive Technology \ Drive Automation \ System Integration \ Services *22292616_0715* Data Sheet Functional Safety Characteristic Safety Values for BE..(FS) Brakes Edition 07/2015 22292616/EN SEW-EURODRIVE
More informationFigure 1.1 Torsional Pendulum
Torsional Pendulum Torsional Pendulum Torsional Pendulum (without masses) (with masses at d1 (with masses at d close to the axis) away from the axis) Figure 1.1 Torsional Pendulum Department of Physical
More informationVD1 CLC. Small Valves DIN-range with a higher k v -value
0 EN - Small Valves DIN-range with a higher k v -value VD CLC Valve body made of brass, mat nickel-plated DN, DN 0 and DN Internally and externally threaded (Rp / R) conforming to ISO 7- Manual knob /
More informationT e c h n i c a l L e x i c o n
T e c h n i c a l L e x i c o n T e r m s f r o m F o r c e a n d t o r q u e m e a s u r e m e n t t e c h n o l o g y a n d G T M d a t a s h e e t s Technisches Lexikon (eng.) 16/10/14 Introduction
More informationH a r m o n i c P l a n e t a r y
H a r m o n i c P l a n e t a r y HPG Series Planetary Gearhead Total Motion Control P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Harmonic Drive LLC is the world s largest manufacturer of
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationExperiment Two (2) Torsional testing of Circular Shafts
Experiment Two (2) Torsional testing of Circular Shafts Introduction: Torsion occurs when any shaft is subjected to a torque. This is true whether the shaft is rotating (such as drive shafts on engines,
More informationResearch Program Vibrations ENERGIFORSK Vibration Group
Vorlesungen Mechatronik im Wintersemester Research Program Vibrations ENERGIFORSK Vibration Group DIAM A Matrix Tool for Turbine and Generator Vibrations Detection, Investigation, Analysis, Mitigation
More informationAE / AER Series. AER Series
AE / AER Series Characteristic Highlights True helical gear design Precision helical gearing increases tooth to tooth contact ratio by over % vs spur gearing. The helix angle produces smooth and quiet
More informationSGF. The metric thread forming connection
SGF The metric thread forming connection Schriever SGF Our challenge: An economical solution Alication: Direct connections in cylindrical bores and casted bores. Schriever SGF -screws are metric thread-forming,
More informationServomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm
Servomotors Order Catalog LSP-Servomotors with optional planetary gearbox Stall torque 0.8 to 0 Nm Order Catalogue LSP Servomotors ID no.: 08.8B.-0 Date: 0/07 Subject to technical change without notice.
More informationMechanical vibration Rotor balancing. Part 2: Vocabulary. Vibrations mécaniques Équilibrage des rotors Partie 2: Vocabulaire. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 21940-2 First edition 2017-05 Mechanical vibration Rotor balancing Part 2: Vocabulary Vibrations mécaniques Équilibrage des rotors Partie 2: Vocabulaire
More informationSelection Calculations For Linear & Rotary Actuators
H-8 For Electric Linear Slides and Electric Cylinders First determine your series, then select your product. Select the actuator that you will use based on the following flow charts: Selection Procedure
More informationram reports in applied measurement
ram reports in applied measurement Introduction In the last decades, strain gage technology has developed into a standard procedure for experimental stress analysis. It is generally the case that three
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationMembers Subjected to Torsional Loads
Members Subjected to Torsional Loads Torsion of circular shafts Definition of Torsion: Consider a shaft rigidly clamped at one end and twisted at the other end by a torque T = F.d applied in a plane perpendicular
More informationStandard Range Nominal Diameter 3-16 mm
Standard Range Nominal Diameter - 1 mm 2 steps for ordering properly: Choose screw type A or B for ground or rolled screws: 1412 or 142 Flange 2422 or 2442 End cap with flange 1214 or 124 Cylindrical 1112
More informationPOLE WHEELS. Where the shaft is very large a cost-effective alternative is to add a pole band (see following section).
A pole wheel on the target shaft is required when using contactless sensors to generate a signal. Often an existing gear wheel can be used but where none is present a special gear, slotted or holed disk
More informationSingle point load cells
SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other
More informationSTANDARDISED MOUNTINGS
STANDARDISED MOUNTINGS for series 449 cylinders conforming to ISO 21287 standard Series 434 MOUNTINGS CONFORMING TO ISO 21287 - ISO 15552 - AFNOR NF ISO 15552 - DIN ISO 15552 STANDARDS applications Low
More informationASSOCIATE DEGREE IN ENGINEERING EXAMINATIONS. SEMESTER 2 May 2013
ASSOCIATE DEGREE IN ENGINEERING EXAMINATIONS SEMESTER 2 May 2013 COURSE NAME: CODE: Mechanical Engineering Science [8 CHARACTER COURSE CODE] GROUP: AD-ENG 1 DATE: TIME: DURATION: "[EXAM DATE]" "[TIME OF
More informationCoromant Capto Short Adapter
Coromant Capto Short Adapter The quick change system for reduced setup and production time. Faster return on investment. Short Adapter Short Adapter More available cutting tool length Short toolholder
More informationDrive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company
Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball
More informationModelling of a dynamic torque calibration device and determination of model parameters
ACTA IMEKO June 2014, Volume 3, Number 2, 14 18 www.imeko.org Modelling of a dynamic torque calibration device and determination of model parameters Leonard Klaus, Thomas Bruns, Michael Kobusch Physikalisch-Technische
More informationCompendium Screw Jacks
Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More informationIncremental Rotary Encoder G58
Shaft: Type S / L / H Hollow shaft: Type W Mechanical Data Housing diameter: mm Shaft:... 0 mm Hollow shaft:... mm Line counts:... 0.000 signals: S, KI, KS, HTL, TTL, O, Vpp, µapp onnector or output: axial
More informationFront flange FLV. Max. [knm/stroke]
SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,
More informationStress Analysis Lecture 4 ME 276 Spring Dr./ Ahmed Mohamed Nagib Elmekawy
Stress Analysis Lecture 4 ME 76 Spring 017-018 Dr./ Ahmed Mohamed Nagib Elmekawy Shear and Moment Diagrams Beam Sign Convention The positive directions are as follows: The internal shear force causes a
More informationVK2 volume flow controller Overview
New option with sound attenuator Maintenance-free VK2 volume flow controller that operates without an auxiliary power supply, for ventilation and air conditioning systems. Adjustable on site. Outstanding
More informationSensor Accessories. Rotary Motion Accessory Pack. Pendulum Rod with two masses, Angular Momentum disc set and Linear Rack with mini c-clamp
Sensor Accessories Rotary Motion Accessory Pack (Product No 3288) Pendulum Rod with two masses, Angular Momentum disc set and Linear Rack with mini c-clamp DATA HARVEST Data Harvest Group Ltd 1 Eden Court,
More information