Mark 55, SPA55 & PA55 Series
|
|
|
- Felix Poole
- 5 years ago
- Views:
Transcription
1 single solenoid open center single solenoid pilot closed center pilot 5 orted, 2 and 3 position, 4-way, Spool & Sleeve v: 5.5 Direct solenoid, solenoid pilot, or air pilot actuated lug-in solenoid with indicator light (ark 55 and S 55) nlubricated or lubricated service Integral speed control available Integral regulators available N 4 / I65 pilot open center pilot closed center single air pilot with spring offset 3 osition 4-Way (5/3), open to 4 and 2 in center double air pilot 3 osition 4-Way (5/3), open to 4 and 2 in center open center closed center pilot 3 osition 4-Way (5/3), open to 4 and 2 in center
2 echnical Data VV D NGISH ark 55 Only RI v 3/8 N = 4.0 1/2 N = 5.0 3/4 N = 5.5 G3/8 = 5.0 G1/2 = 5.0 G3/4 = 5.5 low capacity 185 S 232 S 255 S pstream pressure to SIG 3940 NI/m 4925 NI/m bar upstream/5 bar downstream Operating ressure Range 28 Hg. Vacuum to 150 SIG ilot ressure Range 2-osition, Single, 2-osition, Double, 3-osition, 20 to 5 SIG 15 to 5 SIG 20 to 5 SIG emperature Range (ambient) ark 55 S to to to to +46 Operating Data - ark 55 SONOIDS R ONINOS DY RD 24 V 115 V 0 V 230 V 240 V ower (Watts) Single Solenoid Double Solenoid N/ N/ Holding urrent (mps.) Single Solenoid Double Solenoid Inrush urrent (mps.) Single Solenoid Double Solenoid nergize in seconds De-energize in seconds 2-osition, Single, 2-osition, Double, 3-osition, 2-osition, Single, 2-osition, Double, 3-osition, N/ N/ N/ N/ N/ Operating Data - S 55 SONOIDS R ONINOS DY RD 24 VD 24 V 24 V 115 V 0 V 230 V 240 V ower (Watts) 4.0 N/ N/ N/ N/ N/ N/ 4 nergize in seconds De-energize in seconds Holding urrent (mps.) Inrush urrent (mps.) 2-osition, Single, 2-osition, Double, 3-osition, 2-osition, Single, 2-osition, Double, 3-osition, N/ N/ N/ N/ N/ N/ N/ N/
3 How to Order Valves 553 S 4 15 K Valve Series & ort Size 553 = 3/8 554* = 1/2 555 = 3/4 *Valve unit only. Valve ype S = Single Direct Solenoid, w/lush Non-ocking Override (Std.) SS = Double Direct Solenoid w/lush Non-ocking Override (Standard) = Single Solenoid ilot, w/lush Non-ocking Override = Double Solenoid ilot w/lush Non-ocking Override J = Single ir ilot, JJ = Double ir ilot JK = Double ir ilot, w/lush Non-ocking Override (2 position Only) = Single ir ilot, w/out Override = Double ir ilot w/out Override unction 4 = 2 osition, 4-Way 5 = 3 osition, 4-Way Open enter 6 = 3 osition, 4-Way losed enter 7 = 3 osition 4-Way (5/3), Open to 4 and 2 in enter ounting 00 =Valve nit Only 01 =Valve nit Only w/speed ontrol 2 = 15 w/ompact anifold lock 2 = 2 w/speed ontrol 2 = 2 w/uxiliary Inlet 2 = 2 w/lternate Outlet 2G = 2 w/lternate Outlet & uxiliary Inlet 3 = Individual ase, Side orts, Individual xhaust 3 = Individual ase, Side and ottom orts, Individual xhaust 3 = 3 w/speed ontrol 3D = 3 w/speed ontrol 15 = anifold lock w/side and ottom ylinder orts 25 = 15 w/speed ontrol 31 = lug-in ase, Side orts, ommon xhaust 32 = Individual ase, Side and ottom orts, ommon xhaust 35 = 31 w/speed ontrol 36 = 32 w/speed ontrol Voltage 00 = ir ilot 20 = 24/50-60 V 30 = 110-0/50-60 V 40 = /50-60 V 61 = 24 VD (S only) Options 11 = lush ocking Override 11Z = xtended ocking Override (ark 55 & 55) 13 = 48" eads (ark 55 & S 55) = Internal ilot Supply from if Not Standard (S 55 only) = Internal ilot Supply from (3) (S 55 only) D = Internal ilot Supply from (5) (S 55 only) X = xternal ilot Supply hrough anifold (S 55 only) 16 = ottom orts 19 = erminal lock in onduit rea (ark 55 & S 55 only) 46 = Zinc lated rmature (ark 55 only) ort ype 0 = N G = G ap = G ap (Solenoid ilot Valves) = N (Solenoid ilot Valves) Wiring Option J = lug-in w/ight and Speed ontrol (se only with 01 mounting) K = lug-in w/ight = lug-in D w/ight (S 55 only) O = Not pplicable (sed for ir ilot) Q = lug-in D w/ight and Speed ontrol (se only with 01 mounting) 6 = DIN lug-in w/ight (ark 55 only) NO: or S Series valves, internal pilot supply is standard as follows: 4 = internal from port 4 = internal from port 5 = internal from port 6 = internal from port 5
4 ark 55 Valve on Individual ase 1/2 N conduit port connection D G H I J K R S D O O Q 3/4 N ommon xhaust (only) 3/8, 1/2, 3/4 N or G (5) V Optional ottom ort ocations (5) 3/8, 1/2, or 3/4 N or G tap W W X X Dimensions top dimensions = inches and bottom dimensions (in parenthesis) = millimeters D G H I J K O 1.19 (30.2) 0.94 (23.9) 0.28 (17.1) 1.38 (35.1) 2.76 (70.1) 5.88 (9.4) 5.49 (139.4) 8.49 (215.6) (276.1) 2.56 (65.0) Q R S V W X 3.38 (85.9) 2.06 (52.3) 3.10 (78.7) 4.26 (108.2) 1.59 (40.4) 7.30 (185.4) 0.88 (22.4) 8
5 55 Valve on Individual ase D.28 (7.1) Diameter 2 ounting Holes 1/8 N or G ap ilot ort J I 1/8 N or G ap ilot ort R H K Q G 3/4 N or G ap ommon xhaust (only) N O 3/8, 1/2, or 3/4 N or G ap 5 orts S 3/8, 1/2, or 3/4 N or G ap ottom orts Optional V V Dimensions top dimensions = inches and bottom dimensions (in parenthesis) = millimeters D G H I J K 5.88 (9.4) 1.38 (35.1) 2.76 (70.1) 0.37 (9.4) 1. (28.4) 0.25 (6.4) 8.07 (205.0) 4.03 (102.4) 1.19 (30.2) N O Q R S V 1.59 (40.4) 3.00 (76.2) 7.28 (184.9) 2.06 (52.3) 3.10 (78.7) 4.26 (108.2) 1.00 (25.4) 1.69 (42.9) 3.39 (86.1) 0.88 (22.4) 9
6 S 55 Valve on Individual ase D J I H K N O G R Q S 3/8, 1/2, or 3/4 N ottom orts Optional Dimensions top dimensions = inches and bottom dimensions (in parenthesis) = millimeters D G H I J K 5.88 (9.4) 1.38 (35.1) 2.76 (70.1) 0.37 (9.4) 1. (28.4) 0.25 (6.4) (263.4) 5.18 (131.6) 1.19 (30.2) 1.59 (40.4) N O Q R S 7.28 (184.9) 2.06 (52.3) 3.10 (78.7) 4.26 (108.2) 1.00 (25.4) 1.69 (42.9) 3.38 (85.8) 0.88 (22.4) 10
LO1 SERIES. compact direct solenoid actuated valves
SRS compact direct solenoid actuated valves 0 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T N T................................................... V V O S T O N........................................
MICRO-AIR SERIES. miniature direct solenoid actuated valves
R-R SERES miniature direct solenoid actuated valves RR i c r o i r d i r e c t s o l e n o i d a c t u a t e d m i n i a t u r e v a l v e s T E D T................................................... 3
Valve Products ADEX Series Valves
atalog 000-2US X alves X is a miniature low power consumption solenoid valves, ideal for powering small to mid-sized pneumatic actuators used in automation and process applications. X's versatility is
5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
Basic Features PAR -15 Series Features PAR TM -15 (Patent No. 4,630,632) is a unique 3-Way, programmable, air regulating valve that functions as a pre
PAR -15 Series Basic Features...2 Model Number Index...3 Solenoid Operated Valves...4 Truth Table & Dimensions...5 Narrow Band ontrol and ascading...6 ascading Truth Table...7 Technical Information...
PAR-15 Series. PAR -15 Series Valves
PAR-15 Series Proportional Regulators PAR -15 Series Basic Features... 32 Model Number Index... 33 Solenoid Operated Valves... 34 Truth Table & Dimensions... 35 Narrow Band ontrol and ascading... 36 ascading
Discontinued BL Series, Cross-Reference to MicroKing Series
4908 Discontinued BL Series, Cross-Reference to ISSUED: April, 2000 Discontinued BL Series, Cross-Reference to BL Series BL Valve will be discontinued December, 2000 General Notes: Parker BL Valve is the
A wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
Flow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min
RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division
40 to 300l/min 14MPa. wpressure adjustment is possible across a wide range, from 0.25 to 14MPa {2.5 to 143kgf/cm 2 }.
ounter alance eatures UR UR VV qhis modular valve is used to control actuator back pressure and for other pressure control valve applications. 0 to 00l/min a w adjustment is possible across a wide range,
air and solenoid air operated 5/2-5/3 ISO 5599/01 - Size 2
Series 4/PH MULTIFUNCTION SPOOL VALV air and solenoid air /-/ ISO 99/0 - Size ports / positions SPCIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PRSSUR : 0,90 to + bar (can be used with
SECTION 5 EDI Cartridge Valves
SECTION Cartridge Valves Make Model Page Way Pilot Operated Poppet Style Way Pilot Operated Double Lock Way Direct cting 3 Way -Position Direct cting 4 Way -Position Direct cting Spool Style 4 Way 3-Position
29 188/ way Proportional Flow Control Valve Model 2 FRE 6./.,Series 2X. Ordering Code: Proportional Flow Control Valve 2 FRE 6 2X K4 V *
-way roportional low Control Valve Model RE./.,Series X Size... SI ( bar).... GM ( L/min) R 9 88/.98 R 9 88/.98 Replaces:.9 With pressure compensator for the control of an oil flow independent of pressure
/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2
/ way valves (solenoid actuated diaphragm with forced lifting) /4... Damped operation Operation without differential Suitable for vacuum igh flow rate For systems with low or fluctuating Brass body Wide
The v alv e s with plug c onn e ctions in front are p erfera bly us e d on v alv e m o d ule s.
3/2 and 5/2 way valves Flow rate: 130 l/min; M5 and Legris ø 4 port connection Advantages / Benefits Optimal system solutions due to high level of modularity Maintenance-free and no wear due to high level
G 1/8 - G 3/8 G 1/2 - G 1 1/2. Poppet valves for compressed air 3/2
Poppet valves for compressed air Produced in a complete range of sizes from G 1/8 up to G 1 1/ these valves are particularly suitable for applications where high flow rates and high cycle rates are required.
Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface
ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the
1) Actual pressure drop required for each metering land, up to the specified maximum flow rate is: Q ΔP actual. ) 2 PSI; (Q in GPM) actual Q rated
tlog HY14-255/US echnicl Informtion Generl escription proportionl directionl control vlves re high performnce, two stge pilot operted solenoid vlves with electronic spool position feedck, nd on-ord integrted
CAUTION. All safety information must be followed as provided in this Technical Sheet and in Service Manual RS
peed Queen Domestic asher echnical nformation 0 V, 0 Hz Models 70 70 Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit.
1/8 Solenoid Operated Directional Valves, DSG-01 Series. Max. Operating Pressure Kgf/cm {Spool Type 60 Only 250}
/8 Solenoid Operted Directionl Vlves, DSG- Series WID RNG OF MODLSChoose the optimum vlve to meet needs from lrge selection ville. DIRCIONL CONROLS IC--- he DSG- series solenoid operted directionl vlve
Max. Operating Pressure. Min. *2 Required Pilot Pres. Max. Pilot
DIRCIONL CONROLS Solenoid Controlled ilot Operted Directionl Vlves hese vlves re composed of solenoid operted pilot vlves nd pilot operted slve vlve. When solenoid is energised the pilot vlve directs the
MONITOR REGULATOR SIZING AND OTHER CONSIDERATIONS
MONITOR REGULATOR SIZING AND OTHER CONSIDERATIONS 6" 4" 6" 4" 4" 8" 4" 6" 6" 8" 6" 6" OGA 015 Regulator Fundamentals Seminar Monitor Regulator Sizing Theory FLOW in m out USTREAM MONITOR REGULATOR DOWNSTREAM
Solenoid Pilot Actuated Valves. 501 Series 502 Series Directional Control Valve 503 Series
Solenoid Pilot ctuated Valves 0 Series 0 Series irectional ontrol Valve 0 Series Table of ontents 0/0/0 Series 0 Series Features and enefits Performance ata How to Order 0 Series Features and enefits Performance
Elevator Control Valves
E 00 Elevator ontrol alves IO 00 he LIN E 00 program includes the widest range of options offered to the elevator industry for high performance passenger service. Easy to install, E 00 s are smooth, reliable
DRF RELIABILITY DATA
Y K-ambda 9--0 X alculated values of - omponent derating -~ ain components temperature rise list -~ lectrolytic capacitor lifetime -9 Vibration test -0 bnormal est -~ hermal shock test - est results are
Direct-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
Size A DIN EN
Size A DIN EN 70-0 Actuators 0 series DIN EN 70-0 +, + ow and high housing Degree of protection IP6 Wired versions Moulded versions Degree of protection IP67 Contacts Thread Cable outlet Ordering-No. Female
AIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control
AIR PREPARATION ELECTRONICALLY CONTROLLED PRESSRE REGLATING ALE (PROPORTIONAL PRESSRE REGLATING ALE) SERIES control Description Abb. Port size Recommended Type Data Sheet No. flow (l/min)* airfit tecno
2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2.
2.9 page 175 Namur 1/4 also called Namur 1 in accordance to VDI / VDE 3845. Namur 1/2 also called Namur 2. 2.9 Namur Valves + Selected models are available for low temperature application. Temperature-range:
Smaller. Performance Characteristics. 0.5C (ma) [ C : Rated Capacitance(F)] (After 30 minutes' application of rated voltage : 2.7V) ESR ESR 2 U P±0.
![Smaller. Performance Characteristics. 0.5C (ma) [ C : Rated Capacitance(F)] (After 30 minutes' application of rated voltage : 2.7V) ESR ESR 2 U P±0.](/thumbs/82/86614833.jpg "Smaller. Performance Characteristics. 0.5C (ma) [ C : Rated Capacitance(F)] (After 30 minutes' application of rated voltage : 2.7V) ESR ESR 2 U P±0.")
LCRIC DOBL LAYR CAACIOR "VerCA " Radial Lead ype, Hig Voltage series Hig voltage type (.V). uitable for quick carge and discarge. Wide temperature range ( to + C). Compliant to te RoH directive (//). maller
Solenoid valve Types EVR 2 - EVR 40
Data sheet Solenoid valve s EVR 2 - EVR 40 EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with HCFC and HFC refrigerants. EVR valves are supplied complete or as
Series Shockless Type Solenoid Operated / Solenoid Controlled Pilot Operated Directional Valves
DIRCIL CROLS Series Shockless ype Solenoid Operted / Solenoid Controlled ilot Operted Directionl Vlves he G-Series incorporte electronic circuits o enle djustment of the spool shifting time. specil spool
UPDATE. Summary of Specifications
UPDAE oroidal Design Screw Mount Lowest hermal Resistance Optimum Cooling Capability New Lower Profile s New eat Sink Mounting Kit RoS Compliant he series available in low profile sizes offers high capacitance
P303 Pressure Regulator
P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,
PRESSURE GAUGE SELECTORS
PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed
Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.)
Series VVX// The models VX// have been revised. For details, please refer to catalog no. ES0-A. Similar updating Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Courtesy of Steven Engineering,
Universal type Port size: M5, Rc1/8, Rc1/4. Max. working. pressure
irect acting port solenoid valve for compressed air, manifold (special purpose valve) Series Universal type Port size: M, Rc/, Rc/ Refer to nding for more details. JIS symbol ommon supply / common exhaust
Features: Specification. Model. Acting type. Tube I.D.(mm) Port size. No. of port. Medium Operating pressure range
& F * eries to 3mm ore Features: qual forces on both ends of the piston. Force connection direct, torque safe. agnetic piston standard. % spacesavings. nd caps with 3 air connections and adjustable cushioning.
ISO 9001 TOP MOUNT SPOOL VALVES TOP MOUNT SPOOL VALVES
ISO 900 OP MOUN SPOOL VALVES OP MOUN SPOOL VALVES OP MOUN SPOOL VALVES MEHANIALLY LOKED AIR LINE SEDIMEN IPED AAY NO SPIRAL IS NO EXRUSION DESIGN FEAURES VALVES Balanced spool construction allows ports
F01 D S F01 F01 F01. Vacuum Ejector Box Type (Built in Silencer)/Body Ported Type Series ZH. How to Order. Product Recommendation.
2 Series ZH jector jector ox Type (uilt in Silencer)/ody Ported Type Series ZH eatures Symbol ompact and lightweight desing. hoice of nozzle diameters. Standard or low vacuum pressure options. One touch
2/2-3/2 POPPET VALVES FOR VACUUM (1/8"-6/4") Series AG
2/2/2 POPPET VLVES FOR VCUUM (1/"/") Series G G / 1/2 complete range: / / G/ G/ 1/2 Original Univer poppet system appreciated for decades Servoassisted version complete range of solenoid valves and valves
Softstarter range type PSD & PSDH
Softstarter range type SD & SDH Description Softstarters type S D and S DH ABB s solid state starter range is used when it is important to have a smooth start-up of various types of motor drives. Instead
Cooling Water Flow Regulator
Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data
ISO mm ISO mm. Nl/min. Nl/min. Nl/min. Nl/min. ISO /2 Distributors. ISO Interface. OVERSIZED interface (UNIVER original)
ISO 154071/ Distributors E Integrated electrical connection (ISO 15407/) B M1 connector (Automotive) A Single electrical connection (ISO 15407/1) A Pneumatic connection (ISO 15407/1) ISO 0 ISO Interface
2-way proportional throttle valve for block installation
-way proportional throttle valve for block installation Types FES; FESE Sizes to Component series X Maximum operating pressure bar Maximum flow 800 l/min at Δp = 0 bar Table of contents Contents Page Features
4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design)
4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) Type 4WRL10...25 Sizes (N) 10, 16, 25 Unit series 3 Maximum working pressure P,, 350
Safety valve with unit approval type MV..X.., SV..X..
Safety valve with unit approval type MV..X.., SV..X.. Operating pressure p max = 0 bar Flow Q max = 0 lpm Safety valve type CMVX 2.. with unit approval see D 77 TÜV These safety valves are intended for
ENERGY CONVERSION IN A FLUID POWER SYSTEM. Preview GRC. mechanical friction. File name GA: FLOW GENERATING GROUP. traen_eng GRC: CONTROL GROUP
PRIME MOVER (electric motor, IC engine) ENERGY CONVERSION IN FLUID POWER SYSTEM P P mech mech (exended) P P (useful) hydr hydr rotary shaft G M, Q, Q, M, F, v P W GRC P W GU oil ies oil ies rotary shafts,
Variable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
Manually Operated Directional Valves DMT- 03 / 06 / 10 DMG-01 / 03 / 04 / 06 / 10 Thread Connection / Sub-plate Mounting.
Manually Operated Directional s DM- / / DMG- / / / / hread Connection / Mounting Specifications hreaded Connections Numbers DM--C - DM--D - DM--D - DM--B - DM- -C - DM- -D - DM- -D - ( ) (.) (.) (.) (.)
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE)
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) RE 9035/. Replaces: 05. 1/1 Type 4WRPEH 6 Size 6 Unit series X Maximum
4KB1/2/3/4 Series. Applicable cylinder bore size: 20 to 160mm. Pilot operated soft spool valve. Compressed air
Discrete vlve Su se porting, port pilot operted vlve K1/2// Series pplicle cylinder ore size: 20 to 0mm CD DT VILLE. JIS symol port vlve 2position single port vlve 2position doule port vlve position ll
VALVES B D E B D A. ISO /2 Valves CHARACTERISTICS CODIFICATION KEY. BD 18 mm. BD 26 mm
BD ISO 15071/ Valves CHARACTERISTICS Ambient temperature Fluid Commutation system Max pressure Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil Voltage
MX Series COMPACT AND USER FRIENDLY. Metal Tube Type Variable Area Flowmeter OUTLINE STANDARD SPECIFICATION MODEL CODE MX-400, MX-71 MX-52E
OMPT ND USER FRIENDLY MX Series Metal Tube Type Variable rea Flowmeter OUTLINE MX Series flowmeter is the metal tube type variable area flowmeter having the unified face-to-face dimension. The compact
Its modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
Radial piston pump type R and RG
Radial piston pump type R and RG with radial piston pump acc. to D 6010 and several pressure outlet Operating pressure p max = 700 bar Delivery flow Q max = 76.0 lpm (at 1450 rpm) Radial piston pumps type
Pilot Operated Pressure Relief Valves with 2 or 3 Pressure Ratings Type DB 3U, Series 5X
ilot Operted ressure Relief Vlves with or ressure Rtings ype D U, Series RE 6/.9 RE 6/.9 Sizes,, Up to r Up to 6 L/min Replces: Specil fetures: Suplte mounting Mounting to DIN form E, Connection pltes
Karad-Dhebewadi Road Karad INDIA
MRR MDL K372LG-BXXX BLL MRL B230, B231, B130 Karad-Dhebewadi Road Karad - 415 110 D ote ales compressor drawing number and compressor model name are the same. 25-1206- 1 0591urrent Last Model ame K372LG-BXXX
HRN/HRN-C Series Hydraulic Vane Rotary Actuators
HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12
Model Selection 1. Process Valves. Air. Vacuum
Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air One-touch fittings
Direct-operated 2/2-way compact solenoid valves Type EV210A
Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together
Emerson Climate Technologies (India) Private Limited Karad Dhebewadi Road Karad INDIA
merson limate echnologies (ndia) rivate Limited MRR MDL merson limate echnologies (ndia) rivate Limited Karad Dhebewadi Road Karad - 415 110 D ote: ales compressor drawing number and compressor model name
2/3 Port Valves for Fluid Control Model Selection 1
/ Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each
4/3, 4/2 and 3/2 directional valve with fluidic actuation
4/3, 4/2 nd 3/2 directionl vlve with fluidic ctution RE 22282/04.10 Replces: 08.08 1/12 ype W, WH Size 6 Component series 6X (W), 5X (WH) Mximum operting pressure 315 r [4569 psi] Mximum flow 60 l/min
2017 HYDAC International GmbH. All rights reserved, also regarding any disposal, VT-info exploitation, 51A new reproduction, series 4WE10
2017 HYDAC International GmbH. All rights reserved, also regarding 2018-04 any disposal, VT-info exploitation, 51A new reproduction, series 4WE10 SPECIFICATIONS pmax. = 350 bar Qmax. = 160 l/min direct
CV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
Our policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features
T E C H N I C A L I N F O R M A T I O N M A N U A L F O R T H E A 1 0 V 0 V A R I A B L E D I S P L A C E M E N T P U M P S A10V0 PUMP Features High Efficiency through load sensing (= fuel savings) Maximum
MN4TB1/2 Series. Applicable cylinder bore size: ø20 to ø80
M port vlve DIN ril mount MN/ Series pplicle cylinder ore size: ø0 to ø0 MN W *0E JIS symol port vlve -position single solenoid -position doule solenoid -position ll ports closed -position //R connection
Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-T...
Magnetic and Hydraulic-Magnetic Circuit Breaker 830-T... Description ngle, two and three pole magnetic and hydraulic-magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of
2/3 Port Valves for Fluid Control Model Selection 1
/ Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each
4.4 E 60/E 100 ELECTRIC ACTUATORS E 60/E 100 TECHNICAL DATA E 60 GENERAL APPLICATIONS E 100 FEATURES. Valve interface: EN ISO 5211
ELETRI ATATORS E 0/E 0 TEIAL DATA Valve interface: E ISO Type E 0 A ) E 0 A ) * Operating time (0 0 ) ominal torque ominal current Starting current s 0 m 0, A A s 0 m 0, A 0, A s 0 m A A s 00 m A A s 00
Standard specifications ZX165UFE02001
Standard specifications ZXUF000 May, 0 KAWASAKI HAVY INDUSTRIS, LTD. ROBOT DIVISION Materials and specifications are subject to change without notice. Specification : (Arm): (Controller): 00-DA 0-00DA
HYDRAULIC POWER PACKS
HYDRULI POWER PKS Typical Electric Wiring Diagram (D Pack) HYDRULI POWER PKS Hydraulic Pump Hydraulic Valve Hydraulic ccessory pplication Oder ode System Power Packs SISSOR LIFT POST LIFT JP0 SISSOR LIFT
Pilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting
21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item
PART II. Fluid Mechanics Pressure. Fluid Mechanics Pressure. Fluid Mechanics Specific Gravity. Some applications of fluid mechanics
ART II Some applications of fluid mechanics Fluid Mechanics ressure ressure = F/A Units: Newton's per square meter, Nm -, kgm - s - The same unit is also known as a ascal, a, i.e. a = Nm - ) English units:
MPT Multifunction Multiport
MP Multifunction Multiport Maximum pressure 8 bar F l o w r a t e s t o 0 0 l / m i n echnical data housing (Materials) ead: luminium Cover: Nylon Bowl: Nylon Pressure Working pressure: 8 bar emperature
Directional spool valve type SWPN Nom. size 6 or 10 conforming DIN
Directional spool valve type SWPN Nom. size 6 or 10 conformg DIN 24 340 Max. pressure Max. flow = 350 bar = 150 lpm 1. General The valves illustrated here are directly actuated directional spool valves
Symbol Parameter Test Conditions Value Unit Sxx15L T C. = 90 C 15 RMS on-state current Sxx16R = 90 C 9.5 I T(AV) Sxx16R
Sxx15x & Sxx16x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SRs are triggered with few milliamperes
Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with
The 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
V5013B-F Three-Way Mixing & Diverting Valves
VB-F Three-Way Mixing & Diverting Valves FEATRES SPECIFICATION DATA Mixing or diverting models Bronze body with female, screwed-end connections or cast iron body with flanged-end connections Stainless
Type M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
Directional spool valves type UREP10 electrohydraulically
Directionl spool vlve type URE0 electro-hydruliclly operted NS0 up to 3,5 M up to 50 D SHEE - SERVICE MNU NUL dm 3 /min WK 42 60 05.202 LICION Directionl spool vlves type URE0 electrohydruliclly operted
Emerson Climate Technologies (India) Limited Karad Dhebewadi Road Karad INDIA
merson limate echnologies (ndia) Limited MRR MDL R53KQM-D-XXX (@ 50 Hz) BLL MRL 101, 102, 103, 201, 202, 203 ote : ales compressor drawing number and compressor model name are the same. 1 01 urrent merson
hard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version
YR Pneumatic actuators for process automation Pneumatic connections configuration: NMUR interface V/VE Top pinion: V/VE Holes for sensor box connection: V/VE ottom holes for connecting valves: SO Single
Pneumatic Valves. Valve Actuators
Air Preparation Units Symbol Description Pneumatic Valves Symbol Description Symbol Cylinders Description Filter / Separator with manual drain 3-Position, 4-Way, APB ports closed, center pos. Standard
MPF SERIES RETURN FILTER
MPF SERIES The series of filters MPF has specifically been designed for use on mobile applications, agricultural machinery and power units. The MPF filter range is suitable for flow rates up to 750 l/min.
Time - timing relays 1 Industrial relays, solid state output, width 22.5 mm
haracteristics Zelio ime - timing relays Industrial relays, solid state output, width. mm Presentation 08 he E9 range of relays is designed for simple, repetitive applications with short and intensive
98 Series Backpressure Regulators and Relief Valves
9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or
Target Insertion Flowmeter
Principle of Operation Flow is measured in terms of dynamic force acting on a target (solid disk) in the flow stream. Hermetically sealed, bonded strain gages in a bridge circuit configuration mounted
Advanced modeling of automotive variable displacement vane oil pumps
Pierburg Pump Technology Italy S.p.a. Advanced modeling of automotive variable displacement vane oil pumps Italia GT-SUITE Conference 2017 Torino, 10 May 2017 Authors: Diego Saba, Matteo Gasperini, Gaia
THIS MANUAL IS THE PROPERTY OF THE OWNER. PLEASE BE SURE TO LEAVE IT WITH THE OWNER WHEN YOU LEAVE THE JOB.
-. September, 9 II DIMS gas-fired, power vented and separated combustion unit heaters for models HD/HDB, HDS/HD, PS/BS, P I. Fuel supply shall be shut-off and the electrical power disconnected before proceeding
LITTLE CHAMP TM POWER UNITS 3 to 25 Gallon Reservoir Capacity L I T T L E C H A M P TM P O W E R U N I T S
LILE HM M OWER UNIS 3 to Gallon Reservoir apacity L I L E H M M O W E R 80 U N I S 500 0 1000 bar 100xka 1500 2000 M-10N LILE HM M OWER UNIS 3 to Gallon Reservoir apacity Little hamp M ower Units are designed
Cartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
Hydraulic (Fluid) Systems
Hydraulic (Fluid) Systems Basic Modeling Elements Resistance apacitance Inertance Pressure and Flow Sources Interconnection Relationships ompatibility Law ontinuity Law Derive Input/Output Models ME375
MELCOR Analysis of Helium/Water/Air Ingress into ITER Cryostat and Vacuum Vessel
TM-2926-1 MELCOR Analysis of Helium/Water/Air Ingress into ITER Cryostat and Vacuum Vessel C. H. Sheng and L. L. Spontón Studsvik Nuclear AB, SE-611 82 Nyköping, Sweden chunhong.sheng@studsvik.se Abstract
Flow Measurement in Pipes and Ducts COURSE CONTENT
Flow Measurement in Pipes and Ducts Dr. Harlan H. Bengtson, P.E. COURSE CONTENT 1. Introduction This course is about measurement of the flow rate of a fluid flowing under pressure in a closed conduit.
Model Selection 1. Process Valves
Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air, Inert gas