98 Series Backpressure Regulators and Relief Valves
|
|
- Tyler Norris
- 5 years ago
- Views:
Transcription
1 9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or relief applications in liquid, gas, air, and steam service. The Types 9L, 9H, and 9HH are directoperated and spring-loaded. The Types 9LD and 9HD use additional pressure loading to maintain relief differential pressures, backpressures or for remote setpoint adjustment. The Type 9HM is a direct-operated, spring to close regulator for backpressure or relief applications in liquid, gas, or steam service. The regulator requires no external power to operate and features a sensing line connection for sensing pressure externally from the regulator. A seal washer for the set screw can be included when applications require pressure loading of the spring case (not available on NPS -/ and bodies (DN and )). Using a Type 9HM as a relief valve does not exclude the installation of an ASME certified full flow valve as specified by local codes and regulations or system design. Features W TYPE 9L Versatility Typical applications include backpressure on pumps, maintaining differential pressure across lubricated seals, steam header pressure, fuel and oil lines, air supply systems, pump bypass applications for API general and special purpose lube and seal oil systems, relief applications for flash tanks and accumulators, and other process and industrial uses. Excellent Fluid Compatibility Diaphragms come in stainless steel, Monel, Hastelloy C, or elastomers, and body is available in cast iron and steel as well as stainless steel, Hastelloy C, and Monel. Corrosionresistant trims are available. Close, Stable Regulation Diaphragm is isolated from the main flow stream. Slotted valve plug and pusher post assembly provides positive guiding for improved shutoff. Compact Design Small size allows easy installation in limited spaces. Hastelloy C is a mark owned by Haynes International, Inc. Monel is a mark owned by Special Metals Corporation. D0X0
2 Bulletin.:9 Specifications Available Constructions Type 9L: Direct-operated low-pressure backpressure/relief valve with internal pressure registration and standard adjusting screw for to psig (0, to, bar) set pressure range Type 9LD: Pressure-loaded low-pressure backpressure/relief valve with internal pressure registration and handwheel adjustment for to psi (0, to, bar) differential set pressure range Type 9H: Direct-operated high-pressure backpressure/relief valve with internal pressure registration and standard adjusting screw for to 0 psig (0, to, bar) set pressure range Type 9HD: Pressure-loaded low-pressure backpressure/relief valve with internal pressure registration and handwheel adjustment for to 0 psi (0, to, bar) differential set pressure range Type 9HH: Direct-operated high-pressure backpressure/relief valve with internal pressure registration and standard adjusting screw for 0 to psig (, to,9 bar) set pressure range Type 9HHD: Pressure-loaded high-pressure backpressure/relief valve with internal pressure registration and handwheel adjustment for 0 to psi (, to,9 bar) differential set pressure range Type 9HM: Direct-operated high-pressure backpressure/relief valve with external pressure registration and standard adjusting screw for to psig (0, to 9,0 bar) set pressure range Body Sizes and End Connection Styles TYPES 9L and 9LD 9H and 9HD MATERIAL WCC Steel, Cast Iron CFM Stainless steel, Hastelloy C, Monel /, /, /, NPT /, /, /,, -/, NPT / through NPT, NPS / through SWE, CL0RF, CL0RF, PN // RF / through NPT, NPS / through SWE, CL0 RF, CL0 RF, PN // RF 9HM /, /,, -/, NPT 9HH, 9HHD /, /, /, NPT Construction Materials Cast iron, WCC Steel, CFM Stainless steel, Monel, or Hastelloy C Trim Materials See Table CASE Cast iron, WCC Steel, or CFM Stainless steel Maximum Cold Working Pressures of Body Size and Material ()() REGULATOR Type 9L Type 9LD Type 9H Type 9HD Type 9HH, 9HHD Type 9HM SIZE All Sizes All Sizes All Sizes All Sizes All Sizes All Sizes Relief Pressure Ranges See Table AND CASE MATERIALS Cast Iron Steel Stainless Steel Cast Iron Steel Stainless Steel Cast Iron Steel Stainless Steel Cast Iron Steel Stainless Steel Cast Iron Steel Stainless Steel Steel Stainless Steel MAXIMUM INLET ()() 0 (,) (,) (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) 0 (,) Temperature Capabilities for Elastomer Parts ()() MATERIAL Nitrile (NBR) Neoprene (CR) Fluorocarbon (FKM) () Ethylenepropylene (EPDM) () Perfluoroelastomer (FFKM) () Polytetrafluoroethylene (PTFE) Diaphragm protector () TEMPERATURE RANGE - to 0 F (- to C) - to 0 F (- to C) 0 to 0 F (- to 9 C) Limited to 0 F (9 C) for hot water - to F (- to C) 0 to F (- to C) - to 0 F (- to C). The pressure/temperature limits in this Bulletin and any applicable standard limitation should not be exceeded.. Loading pressure plus spring setting should not exceed maximum inlet pressure.. Temperature and/or the body end connection may decrease these maximum pressures.. Maximum inlet pressure equals set pressure plus build-up.. Pressure and/or the body end connection may decrease these maximum temperatures.. Not for use on steam service.. Not available for Type 9HM.
3 Bulletin.:9 Specifications (continued) Temperature Capabilities for Metal Parts ()() MATERIAL Cast Iron () WCC Steel CFM Stainless steel, Monel, or Hastelloy C TEMPERATURE RANGE - to F (- to C) - to F (-9 to C) - to F (- to C) Maximum Spring Case Loading Pressure for Types 9LD and 9HD (Spring Setting Plus Loading Pressure) ()() Type 9LD Spring Case Cast Iron: psig (, bar) Steel or Stainless steel: psig (, bar) Type 9HD Spring Case Cast Iron: psig (, bar) Steel or Stainless steel: 0 psig (, bar) Type 9HHD Spring Case Cast Iron: 0 psig (, bar) Steel or Stainless steel: 0 psig (, bar) Capacities Types 9L and 9LD: See Tables through Types 9H and 9HD: See Tables through Type 9HH and 9HHD: See Tables through Type 9HM: See Tables through Shutoff Classification Per ANSI/FCI 0--0 Metal Seats: Class IV PTFE: Class IV Elastomer Seats: Class VI Flow Coefficient C : Type 9HM Sensing Line Connection /, -/, or NPT body: / NPT / or NPT body: / NPT IEC Sizing Coefficients NPS (DN) / X T F D F L K m / () / and ( and ) -/ and ( and ) Options Handwheel or tee handle for Types 9L, 9H, and 9HH Tapped spring case vent for Types 9L, 9H, 9HH, and 9HM Seal washer to permit spring case pressure loading for Types 9L, 9H, 9HH, and 9HM. The pressure/temperature limits in this Bulletin and any applicable standard limitation should not be exceeded.. Loading pressure plus spring setting should not exceed maximum inlet pressure.. Pressure and/or the body end connection may decrease these maximum temperatures.. Not available for Type 9HM. Differential Pressure Capability Spring-loaded PTFE packing and tapped connections permit pressure loading of Types 9LD and 9HD spring cases. Handwheels Handwheels (standard on the Types 9LD and 9HD and optional on some sizes of the Types 9L and 9H) allow easy pressure setting changes. Sour Gas Service Capability Optional materials are available for applications handling sour gases. These constructions comply with the recommendations of NACE International Standards MR0 and MR0. Principle of Operation Relief or backpressure valves respond to changes in upstream pressure. Pressure changes register under the diaphragm (see Figure ) through a registration hole in the valve body (through upstream sensing line connection for Type 9HM). When the pressure increases beyond the spring setting, the diaphragm pressure overcomes the spring compression. This causes the valve plug to move away from the orifice. The flow line through the valve is open and excess pressure is vented. When upstream pressure drops back to normal, the valve resumes its closed position. The chart in Figure illustrates the operation of an NPS / (DN ) body used in air service. As the inlet pressure increases, initial flow occurs at the bubble point of. psig (0, bar). Flow increases with further rises in the inlet pressure, reaching SCFH (, Nm /h) at the relief pressure setting of psig (0, bar). Greater capacities are obtained with higher build-ups over the relief pressure setting, as shown in the capacity tables. When the inlet pressure decreases, flow decreases until the valve reseals to reseat point of 9 psig (0, bar).
4 Bulletin.:9 METAL DIAPHRAGMS REGISTRATION HOLE GASKET DIAPHRAGM VALVE PLUG FOR TYPE 9H WITH TWO METAL DIAPHRAGMS (ALSO TYPICAL OF 9HH AND 9L EXCEPT FOR TYPE 9L, / NPT, TO PSI (0, TO 0, bar) RANGE) C OMP O-RING SEAT METAL DIAPHRAGMS ORIFICE A9 INLET OUTLET ATMOSPHERIC GASKET TYPE 9L (/ NPT, TO PSI (0, TO 0, bar) RANGE) WITH ONE METAL DIAPHRAGM TYPE 9H (ALSO TYPICAL OF 9L AND 9HH) HANDWHEEL METAL DIAPHRAGMS CONTROL VALVE PLUG GUIDE GASKET FOR TYPE 9HD/LD/HHD WITH TWO METAL DIAPHRAGMS, ASSEMBLE DIAPHRAGM GASKETS UNDER AND ABOVE THE METAL DIAPHRAGMS AS SHOWN ABOVE M0 INLET OUTLET LOADING TYPE 9HD (ALSO TYPICAL OF 9LD AND 9HHD) Figure. 9 Series Operational Schematic
5 Bulletin.:9 METAL DIAPHRAGMS TO UPSTREAM SENSING LINE GASKET FOR TYPE 9HM WITH TWO METAL DIAPHRAGMS, ASSEMBLE DIAPHRAGM GASKETS UNDER AND ABOVE THE METAL DIAPHRAGMS AS SHOWN ABOVE INLET OUTLET ATMOSPHERIC M INLET OUTLET ATMOSPHERIC TYPE 9HM Figure. 9 Series Operational Schematic (continued) Once the valve has resealed, leakage will not occur again until the bubble point pressure of. psig (0, bar) is reached. Table shows typical pressure differences between the relief pressure setting and the bubble point, and between the relief pressure setting and the reseat point. These differences are to be used in conjunction with the capacity tables to determine the total inlet pressure increase required to develop the tabulated flows and to determine the actual inlet pressure reductions required for reseat point. Capacity Information Relieving capacities at selected pressures and outlet pressure flows are given in SCFH (0 F and. psia) of air in Tables,,,,,,, and 9. To determine the equivalent capacities for other gases, multiply the table capacities by the following appropriate conversion factors:.9 for 0. specific gravity natural gas, 0.0 for propane, 0.0 for butane, or.0 for nitrogen. For gases of other specific gravities, divide by the square root of the appropriate specific gravity. Then, if capacity is desired in normal cubic meters per hour at 0 C and,0 bar, multiply SFCH by 0.0. Typical relieving capacities in pounds per hour and kilogram per hour of saturated steam are shown in Tables,, and. Tables,,, 9,,,, and gives relieving capacities in U.S. gallons per minute and in liters per minute of water. Sizing Determine Flow Rates for units used as differential relief valves as follows: Air and Steam Service When the Capacity Information section do not cover the actual service conditions, it will be necessary to calculate the flow rate available from the relief valve. Step. From the Capacity Information section determine a flow rate using the closest available data for setpoint
6 Bulletin.:9 and build-up. With this information, calculate a flow coefficient using the following: Equation : C g Q P a G T C g = GT P a SIN Q ) C = Calculated Flow coefficient P P a = Flow rate from tables (SCFH) ) DEG = Inlet pressure from table (set pressure and build-up) converted to absolute pressure = Specific gravity = Absolute temperature of gas at inlet degrees Rankine = F + 0 P = Absolute inlet pressure, psia = psig +. C = P = P - P, psid Calculate the C g coefficient for the setting and build-up nearest to the desired service conditions within the selected spring range. Then use this C g to calculate the approximate flow available for the actual setpoint and build-up desired. Available C g will vary based upon setpoint, differential pressure, build-up, and spring range. Step. Calculate the actual flow rate available using the coefficient from Step and the actual inlet pressure (setpoint plus build-up) and actual outlet pressure (if not atmospheric). Equation : ) P Q SCFH = C g P a SIN DEG GT P a Example. Service Conditions: ) C Setpoint, psi (,9 bar) Build-up allowed, psi (0,9 bar) Outlet discharges to atmosphere Require 0 SCFH ( Nm /h) air flow rate INLET, A9-. (0,) Figure. Typical Bubble Point and Reseat Point Performance From Table, select NPS / or (DN or ) body, red spring for 0 psi (,9 bar) setpoint, and psi (0,9 bar) build-up. The Type 9H will flow 000 SCFH ( Nm /h) air. Calculate C g for these table conditions using Equation : P = 0 psig (,9 bar) + psig (0,9 bar) build-up = psig or. psia (, bar g or, bar a) P = P - P = psid (, bar d) Q C = = 000 SCFH ( Nm /h) Answer from Equation, C g = * *Since build-up relates to travel, this coefficient is valid for all pressure settings on the spring used in the calculation whenever the build-up is psi (0,9 bar). Now, solve for actual flow, Q, from the original service conditions using Equation : P = psig (,9 bar) + psig (0,9 bar) build-up = psig or 9. psia (, bar or 9, bar a) P = 0, therefore P = P - P = psig (, bar) - 0 = psid (, bar d) C g (,) (0,9) (0,) 9 (0,) (0,) C = BUBBLE POINT TIGHT SHUTOFF POINT = (from above) PSIG (0, bar) SETTING SCFH (, Nm /h) SETTING NPS / (DN ) TYPE 9L (0,) 0 00 (,) (,) AIR FLOW, STANDARD CUBIC FEET PER HOUR (Nm /h) and and INCREASING INLET DECREASING INLET
7 Bulletin.:9 Answer from Equation, Q = SCFH (9 Nm /h) rated capacity. Since this capacity is greater than the 0 SCFH ( Nm /h) required, the relief valve may be used or the calculation could be repeated to try for a smaller body size. Example. Service Conditions: Setpoint, psi (, bar) Build-up allowed, psi (0,9 bar) Outlet discharges into pressured system of psi (, bar) Require 00 SCFH (0, Nm /h) air flow rate From Table, select NPS / or (DN or ) body, blue spring. For 0 psi (, bar) setpoint and psi (0,9 bar) build-up, the Type 9H will flow 0 SCFH ( Nm /h) air. Calculate C g for these table conditions using Equation : P (inlet) = 0 psig (, bar) + psig (0,9 bar) build-up = 0 psig or. psia (,0 bar g or,0 bar a) P = P - P = 0 psig (,0 bar) - 0 = 0 psid (,0 bar d) Q C = = 0 SCFH ( Nm /h) Answer from Equation, C g =.* *Since build-up relates to travel, this coefficient is valid for all pressure settings on the spring used in the calculation whenever the build-up is psi (0,9 bar). Now, solve for actual flow, Q, from the original service conditions using Equation : Answer from Equation, Q = 9 SCFH ( Nm /h) rated capacity. Since this capacity is greater than the 00 SCFH (0, Nm /h) required, the relief valve may be used or the calculation could be repeated to try for a smaller body size. Liquid Sizing for Liquids Other than Water Step. Determine C v at build-up conditions of application. Q P C v Step. C v = Q P = Flow in GPM from capacity tables = Pressure drop in psi (setpoint and build-up) = Valve sizing coefficient To determine flow rate for liquids other than water or flow rate for differential relief service: Q = C v P/G G = Specific gravity of fluid Maximum Allowable Pressure Drop for Liquid Service Pressure drops in excess of allowable will result in choked flow and possible cavitation damage. To determine maximum allowable pressure drop for water: P P C g = psig (, bar) + psig (0,9 bar) build-up = psig or 9. psia (, bar g or, bar a) = P - P = 0 psig (, bar) - psig (, bar) = psid (, bar d) =. (from above) P(allow) = K m (P ) P = Valve differential - PSI K m P = Valve recovery coefficient from table = Valve inlet pressure psig C = To determine maximum allowable pressure drop for fluids other than water, see Fisher Catalog.
8 Bulletin.:9 Table. Trim Materials ELASTOMER SEAT STANDARD OPTIONAL Orifice O-ring retainer Valve plug Valve plug guide Pusher post Diaphragm retaining washer Diaphragm O-ring seat Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Neoprene (CR) Nitrile (NBR) Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Fluorocarbon (FKM) () or Ethyleneproplylene (EPDM); PTFE protector available; Stainless steel () Fluorocarbon (FKM), Ethyleneproplylene EPDM, Perfluoroelastomer (FFKM) () METAL SEAT STANDARD OPTIONAL Orifice Valve plug Valve plug guide Pusher post Diaphragm Diaphragm retaining washer Stainless steel, hardened Stainless steel, hardened Stainless steel Stainless steel Stainless steel () Not used Stainless steel, Hastelloy C, Monel Stainless steel, Hastelloy C, Monel Stainless steel, Hastelloy C, Monel Stainless steel, Hastelloy C, Monel Neoprene (CR), Fluorocarbon (FKM) (), PTFE protector available, Hastelloy C, Monel Stainless steel. Available for Type 9HM only.. Two metal diaphragms will be used except only for Type 9L, / NPT, to psi (0, to 0, bar) range which uses only one metal diaphragm (see Figure for assembly reference).. Two diaphragms will be used if elastomer diaphragm is Fluorocarbon (FKM) Table. Spring Ranges for Relief or Differential Relief Pressures NPS (DN) / () / () /, (, ) -/, (, ) SET RANGE (), PSIG OR PSI (bar) Type 9L or 9LD Type 9H, 9HD, or 9HM Type 9HH or 9HHD PART NUMBER COLOR to (0, to 0, bar) to (,0 to, bar) E90 to (0, to 0,9 bar) to (, to, bar) E90 to (0, to, bar) 0 to (, to 9, bar) E9 to (, to, bar) to 0 (9,0 to, bar) L to (, to,9) N9 Light Gray to (0, to 0, bar) to (,0 to, bar) E90 to (0, to 0,9 bar) to (, to, bar) DT00 to (0, to, bar) 0 to (, to 9, bar) E99 to (, to, bar) to 0 (9,0 to, bar) L to 0 () (,0 to,9 bar) B99X0 Unpainted to () (,9 to 9,0 bar) B99X0 Unpainted to (, to,9) N9 Light Gray to (0, to 0, bar) to (,0 to, bar) E990 to (0, to 0,9 bar) to (, to, bar) E990 to (0, to, bar) 0 to (, to 9, bar) E99 to (, to, bar) to 0 (9,0 to, bar) L to 0 () (,0 to,9 bar) B99X0 Unpainted to () (,9 to 9,0 bar) B99X0 Unpainted to (, to,9) N9 Black Stripe to (0, to, bar) E909 Dark Gray to (, to, bar) E90 Light to 0 (, to,9 bar) E9 Light Gray to 0 (, to, bar) P0 Black. All springs may be backed off to 0 psig (0 bar). However, highest capacities and best performances are obtained by using these springs in their recommended ranges. Psi rather than psig are used for differential relief constructions.. Not available for Type 9HM.. Only available for Type 9HM. Stainless steel construction.
9 Bulletin.:9 9 Table. Water Relief Capacities in Gallons per Minute (l/min), Types 9L and 9LD with Elastomer Diaphragm NPS (DN) GPM (l/min) BUILD-UP OVER Part Number Color Code (0,) (0,) (0,) (0,) (,) (,) / E90 (0,) 0. (,) 0. (,). (,0).9 (,0). (9,). (,) (,). (,0). (,9). (,). (,). (,0). (,0). (9,). (9,). (,0). (,). (,). (,).9 (,) E90. (,). (,). (,0) (,9). (,). (,).9 (,). (,).0 (,). (,) E9 (,). (,). (,). (,). (,). (,). (,) (,9). (,). (,). (,). (,). (,) (,). (,). (,). (,). (,). (,9).9 (,) (,). (,). (,0). (,0).9 (9,9). (9,). (9,). L (,). (,9). (,). (,9). (,). (9,). (,). (,) (,). (,). (,). (,) (,). (,0). (,). (,0). (,). (,) (,). (,) (,). (,) (,). (,). (,9). (,). (,) 9. (,) / () E90 (0,). (,). (,). (9,) (,). (,). (,0). (,) 9. (,) 9. (,0). (,). (,). (,). (,).9 (,). (,). (,9). (,9). (9,). (,). (,) DT00. (.). (,). (,) (,9). (,). (,). (,). (9,0). (,).0 (,) E99 (,). (,0) (,9). (,). (,). (9,). (,0) 9. (,). (9,). (,). (,). (,). (,0). (,). (,9). (,9). (,). (,). (,). (,0). (,9). (,). (,) 9. (,). (9,) 9.9 (,). (,) L (,). (,9). (,0). (,) (,). (,) (,) 9. (,). (,). (,) (,). (,) (9,). (,) (,0). (,). (,). (,). (,). (,9). (0,) 9. (,) 9. (,) (,). (,). (,) (9,). (0,) /, (, ) E990 (0,). (,). (,). (,). (0,0) 9 (,9) (,) (9,). (,) (,) (90,). (9,). ().9 (9). (). ().0 (). (9) 9. () 9. (0) E990. (.). (,). (,). (9,). (0). () 9. (). ().9 (). () E99 (,) (,0). (,). (,) (9,) (90,). (9,). (9,). (). () (). () () () () (9) () (9) (). () () ().9 (). () () 9. (). ().0 (9) L (,) (,9) (,) 9. (,) (,) (90,) () (9,) (). () 9 (). (). () (). () () () () () () () (9) () (9) ().0 (9) () (9)
10 Bulletin.:9 Table. Water Relief Capacities in Gallons per Minute (l/min), Types 9L and 9LD with Metal Diaphragm NPS (DN) GPM (l/min) BUILD-UP OVER Part Number Color Code (0,) (0,) (0,) (0,) (,) (,) / E90 (0,) 0. (,) 0. (,). (,). (,9). (,0). (9,).0 (,).0 (,). (,). (,). (,).9 (,). (,). (,0).9 (,).9 (,). (,). (,). (,0) E90. (,). (,9) (,). (,0). (,). (9,). (,).0 (,). (,).0 (,) E9 (,) (,). (,). (,).9 (,) (,). (,). (,0). (,). (9,) (,9). (9,). (,). (,). (,). (,). (,0). (,). (,). (,). (,). (,9). (,). (,9). (,). (,9). (,).9 (9,9) L (,). (9,). (,). (,). (,0). (,). (,). (,0).9 (,). (,) (,9). (,) (,). (,) (,). (,). (,) (,). (,). (,9). (,).9 (9,9). (,).9 (9,9)..9 (9,9).. (,9) / () E90 (0,). (,). (,). (,0). (,) (,). (,). (,) (,). (,0) 9. (,) 9. (,). (,).0 (,) (,). (,). (,0). (,). (,).0. (9,0) DT00. (.). (,). (,). (,) 9 (,). (9,) (9,). (,). (,). (,) E99 (,). (,9). (,) (,9). (,) (,). (,). (,). (,) 9. (,). (,9) 9. (,). (,) 9. (,). (,) (,). (,). (,) (,0). (,9) (,0). (,). (,0). (,).. (9,0).0 L (,). (,) (,). (,0). (,). (,). (,). (,). (,) 9. (,0) 9. (,). (,) (,). (,). (,). (,). (,) (,0). (,). (,) (0,). (,). (,). (,). (,9).0. (,9) 9. (,) /, (, ) E990 (0,). (,). (,) (9,). (,). (,). (,9). (0,0) (,) 9. (,) (9,). (,) (,). (9,). (9,). (). (). (). (). (). () E990. (.). (,). (,). (,). (,) (90,). (0) 9.0 (). (9). () E99 (,) (,9). (9,). (,) (,0) (,). (0,0) (,). (,9) (9,). (,9). (0). (,9) (9,) 9 (). () () () 9. (). (9). (). (). (). (). (). (). () L (,). (9,) (,). (9,). (,) 9 (,). (,). (,) (,0). (,) (,). (,) (,) (,) (9,) (9,). (). (9). () () (). (). () 9. (0). () 9. (0) (9)
11 Bulletin.:9 Table. Steam Relief Capacities in Pounds per Hour (kg/h), Types 9L and 9LD with Metal Diaphragm Only NPS (DN) POUNDS/ HOUR (kg/h) BUILD-UP OVER Part Number Color Code (0,) (0,) (0,) (0,) (,) (,) / E90 (0,).. (,) (,) (,) (,0) (,) (,9) (,) (,) (,) 0 (,) (9,0) 0. (,). (,) 0. (,). (,) 90. (,0) 9. (,) 0 (,) E90 9 (,) (,) (,) 9 (,) (,) (9,0) 9. (,9) (9,0) 9 (,0) E9 (,) (,) 9 (,) (,) (,) (,) (,) (,) 9 (,) (9,0) (9,0) (,) (,) (,) (,9) (,) 9 (,) 9 (,) (,) (,) (,) (,) (,) (,) (9,9) (,) (,) (,) L (,) (,) 9 (,) (,) (,) 9 (,) (,) (9,0) (9,9) (,) (,) (,9) (,) (9,0) 9 (,) 9 (,) 9 (9,) (,) (,) (,) (,) (,) (,) (,) 0 (,0) (,) (0,) 9 (,) / () E90 (0,) 9 (,) (,) (9,0) 9 (,) 0 (,) (,) (,) (,) (,) (,) (,) 9 (,) (9,) (,) 9 (9,) (9,0) () () DT00 (,9) (,) (,) (,) (,) 9 (,) (9,0) () E99 (,) 9 (,) (9,0) (,) 9 (,) 0 (,) 9 (9,) (,) (,) (,) (,0) (,) (0,) (,) (,) (,) (9,) () (9,) () 0 () 9 () () () 0 () 9 () () L (,) (,) (,) (,9) (,9) (,) (9,0) 0 (,) 9 (9,) (,) (,) (,) (,0) 9 (,) (,) 90 (,) (9,) (99,) () 0 () () () () 9 () (9) () () /, (, ) E990 (0,) (,) (,) (0,) (,) (9,) (9,9) () () () () () () () () () () () () E990 (,) 0 (90,) (9) 0 () () 0 () (9) () 9 () E99 (,) 0 (,) (,) (,) (,) (9,) () () () 0 () () () (9) 0 () () () 0 () (9) () (9) () () () 9 () () () () () L (,) 9 (,) (,) (,) (,) 90 (,) (99,) () () 0 () () () () () () 90 () (9) () () () () 90 () 90 (90) () 0 () ()
12 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Types 9L and 9LD with Elastomer Diaphragm NPS (DN) Part Number Color Code SCFH (Nm /h) (0,) (0,) BUILD-UP OVER (0,) (0,) (,) (,) E90 (0,) 0 (,0) 0 (,0) 0 (,0) (,) (,) (,) 90 (,) (,) 0 (,9) 0 (,) (,) 0 (,0) (,) (,) (,) (9,) 0 (,) 0 (,) 0 (,) E90 (,) 0 (,) 0 (,) (,) 00 (,) (,9) (,) 0 (,) (0,) / E9 (,) 0 (9,) 0 (,) 0 (,) 0 (,) 00 (,9) 00 (,) 00 (,9) 00 (,) 00 (,) 00 (,) (,9) 00 (,) 00 (,) 0 (,) 0 (,) 0 (,) 0 (,) 00 (9,) (,) 00 (9,) (,) 0 (,) (,) (,) 00 (,0) 0 (,) (9,) L (,) (,) 0 (,) 0 (,) 00 (,9) 00 (,) (,9) (,9) 00 (,) 0 (,) 0 (,) 0 (,) (,0) 0 (,) 0 00 (9,) 00 (9,) 00 (,) (,) (,) 00 (0,) (,) (,) 0 (,) (9,) (9,) (9,) () E90 (0,) (,9) (,9) 0 (,) 0 (9,0) 0 (,0) 00 (9,) 00 (,) 00 (,0) 00 (0,) (9,0) (9,) () () 0 () 90 () () () DT00 0 (,) 00 (,) (,) (,) 0 (9,) 00 () () () () / () E99 (,) 0 (,) 00 (,) 00 (,0) 00 (,) 0 (,) (9,) (,) (99,) () (9,) () () () () 0 (9) 0 () () 0 () 90 () () () 0 () () () 0 () () 000 () L (,) (,) 00 (,) 00 (,) 0 (,) 00 (,) 00 (,0) (,) (9,) (9,) (99,) () () () 0 () 0 (9) 0 () 00 () 00 () () () 00 () () 0 (90) 0 (9) 000 () () 000 () E990 (0,) 00 (0,) () () 0 () () 00 (0) 0 () () 00 () 00 () 000 () () 0 () () 9 (0) 99 () 0 (9) 000 (9) E () 0 () () 0 (9) 000 () (9) (9) 0 () /, (, ) E99 (,) 0 () 0 (9) 00 () 0 () 00 () 000 () 0 (9) () 0 () () 00 () 900 () () 90 () (9) (9) () 0 () 000 () 0 (9) 0 () 0 () L (,) (9,) 0 (9) 0 () () 000 () 00 () 0 (9) 00 () 90 () 0 () (9) (9) () 000 () 000 () 000 () 000 (9) 0 () 000 (9) 000 ()
13 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Types 9L and 9LD with Metal Diaphragm NPS (DN) SCFH (Nm /h) BUILD-UP OVER Part Number Color Code (0,) (0,) (0,) (0,) (,) (,) / E90 (0,) 0 (,0) 0 (,0) 0 (9,) 0 (9,) (,) 0 (,0) (,) 9 (,) 90 (,) 0 (,9) 0 (,9) (,) (,) (9,) 0 (,) 90 (,) 0 (,) (,9) 90 (,) (,) E90 (,) 0 (9,) (,) 0 (,) (,) (,9) (,) 0 (,) (0,) E9 (,) 00 (,) (,) (,) 0 (9,) (,) (,) (,) 0 (,) 0 (,) 0 (,) (,) 00 (,9) 00 (,9) 00 (,) 00 (,) 00 (,) 0 (,) 0 (,) (9,) 0 (,) 00 (,) (,) (,) (,) 0 (,) (,9) (,) L (,) 00 (,) (,) (,) (,) 0 (,) (,) 0 (,) (,9) (,) 00 (,9) 00 (,) 00 (,) (,9) 00 (,) 0 (,) 0 (,0) 00 (,) 00 (,) 00 (,0) (,) 00 (0,) (,) 0 (,) (,) 0 (9,) (9,) / () E90 (0,) 0 (,) 00 (,9) (,9) 0 (,) 0 (9,0) (,0) (,0) 00 (,0) 00 (,0) 00 (0,) (9,0) (9,) () () 0 () () () () DT00 00 (,) 0 (,) 00 (,) 00 (0,) (,) () () 0 () () E99 (,) 0 (,) 0 (,) (,) 0 (,) 0 (9,0) 0 00 (,) 00 (,0) 00 (0,) (,) (,) (9,) 0 (9,) (99,) 00 () () () 0 () 0 () 0 () 00 () () 0 () 0 (9) () 9 () 90 () L (,) 0 (9,) (,) (,) 00 (,) 00 (,) (,9) 0 (9,0) 0 (,0) 00 (,) 00 (0,) (,) (,) (9,) (99,) () 00 () () 0 () () 00 () 00 () 0 () () 0 () () 0 (9) /, (, ) E990 (0,) 00 (,) 00 (,0) () 00 () 00 () 0 (9) (9) 0 () 00 () () 0 () 0 () (99) 0 () () 90 () 9 () 000 E (0,) 0 () 0 () 0 () 00 () 0 () 0 () 9 (0) 0 () E99 (,) 0 (9,0) 00 (,0) 00 (0,) () 00 () (9) 0 () 00 () 0 () () 00 () 0 (9) 00 () 00 () 000 () 0 () 90 () (0) (9) 0 () (9) (0) 00 () () L (,) 00 (,) 00 (9,) 00 (,0) (9,) () 0 (9) 0 () 00 (0) 0 () () 000 () 00 () 000 () 00 (9) 00 () 90 () (9) 000 (9) () () 000 () 000 (9)
14 Bulletin.:9 Table. Water Relief Capacities in Gallons per Minute (l/min), Types 9H and 9HD with Elastomer Diaphragm NPS (DN) GPM (l/min) BUILD-UP OVER Part Number Color Code (0,) (,) (,) (,) 0 / E90. (,) (,9). (,) (,). (,). (,0). (,9). (,). (,). (,). (,) (,). (,0). (,). (,0).0 (,). (,).9 (,).9 (,) 9. (,0). (,). (9,).0 (,). (,) (,). (,). (,) E90 (,). (,). (,). (,). (,). (,). (,9) (,). (,). (9,) (,9). (,). (,). (,0). (,) (,) (,). (,) 9 (,). (,0). (,). (9,). (,). (,). (,) 9. (,0) (,). (,). (9,).9 (,). (,0) E9 (,) 0 (,). (,9). (,9). (,9). (,). (,0) (,). (,). (,) (,9). (,). (,) (,). (,). (,0). (,). (,). (,). (,). (9,) 9. (,). (,) (,9) (,). (,). (,9). (,). (,). (9,). (9,0). (,) L 0 (,) (,) 0 (,). (,). (9,). (,). (9,) (,). (,). (,). (,) (,). (,9). (,). (9,) (,9). (,0). (,). (,). (9,). (,) 9.9 (,) (,) (,). (,) (,0). (,) (0,). (,). (,) / () E90. (,) (,9). (,9) 9. (,) (,) (0,) (,9). (,). (,). (,). (,) (,). (,). (,) 9. (,). (,). (0,0). (,) (,) (9,) (,). (9,) (9,) (9,). (9,). () () DT00 (,). (,). (,). (,) (,). (,). (9,). (,) 9 (,) (9,) 9. (,) (,) (,). (,). (,) (9,). (,) 9. (,) (0,). (0,0) (,) (,) (,) (9,) (,) (90,). () (9,) (9,) () E99 (,) 0 (,). (,9). (,9). (,9) (,9) (,). (,). (,) (,) (,9) 9 (,) (,) (,0) (9,) (0,). (,). (,) 9. (,). (,9) 9. (,). (,9). (). (9,) (). (9) (). (9). () 9 (). () () L 0 (,) (,) 0 (,). (,) (,). (,). (,). (,) (,). (,). (,) (,) 9 (,). (9,). (,) (,) (,0). (,) 9 (,9). (,) (,) (9,) 9. () 9 (). (). (). (). (). () /, (, ) E990 (,) (9,) (). (,9) 9 (). () () (). () () () (9) () () (0) () (0) 9. () (0) () () () () () 9 () () 0 () E990 (,). (,). (,). (,) (,) (9,) () (9,) () () () () (0) (). () (9) () () () () (9) () (9) (). () () (). (9) ().0 (9) (0) - continued -
15 Bulletin.:9 Table. Water Relief Capacities in Gallons per Minute (l/min), Types 9H and 9HD with Elastomer Diaphragm (continued) NPS (DN) GPM (l/min) BUILD-UP OVER Part Number Color Code (0,) (,) (,) (,) 0 /, (, ) E99 (,) 0 (,). (,9). (,9). (,9) 9 (,9) (,) () (9,) 9 (). () () () (9) () (). (9) (). () () () () () (). (). (). () () (9) () (9) () L 0 (,) (,) 0 (,) 9 (,9) (,) (,) (90,) () () () () 9 () (9) () () 0 () () () () (9) (9) () () (). () 9 () () 9 () 9 () -/, (, ) E909 Dark Gray. (,). (,). (,). (,). (,) (,) (9,) (9,) () (,) (9,) () () () () () () (9) () () () () () () () (0) 9 () (9) 90 () (9) (9) () 9 () 9 () () () () () () (0) () 9 (0) 9 () () (9) () () () E90 Light (,) (,) (,) (,) (,) (0,) (,) (9,) () (,) (9,) () () () () () (9) (9) () 0 () 0 () () 0 () (9) 9 (0) () 0 (9) () (9) () () 0 (0) 0 () 9.9 () (9) 9 () (0) (9) () 9 () () E9 Light Gray (,) 0. (9,). (9,). (9,) 9 (,9) (,) (90,) () () () () () () (0) (9) () () () 0 (9) () () 0 () () () () 0 () 90 (9) (9) 9 () () P0 Black (,) 0 (,) 0 (,). (,). (,). (,). (,) (,) 9 (,) (,) (,) (,0) (,) (,) (,) (9,) () (9) () () (0) () () (9) () 90 () 9 (0) 0 (9) () (9) 0 () (9) () 90 (9) 0 () (9) () () () (90)
16 Bulletin.:9 Table 9. Water Relief Capacities in Gallons per Minute (l/min), Types 9H and 9HD with Metal Diaphragm NPS (DN) GPM (l/min) BUILD-UP OVER Part Number Color Code (0,) (,) (,) (,) (,) 0 / E90.9 (,0). (,9). (,). (,9). (,). (,) (,). (,). (9,).9 (,). (,). (,). (,). (,) (,). (,).9 (,). (,). (,). (,0) 9.0 (,). (,0).9 (9,9) 9. (,). (,9) 9. (,). (9,) 9. (,). (,). (,) E90 (,). (,). (,). (,). (,). (,). (,9). (,). (,). (,0). (,0). (,). (,0). (,). (9,) (,). (,0). (,). (,). (,) (,) 9. (,). (9,) 9. (,).9 (,). (,0). (,) (,) 9. (,).9 (,0).9 (,). (,).9 (,). (,9) E9 (,) 0 (,). (,9). (,9). (,9). (,) (,). (,) (,). (,). (9,). (9,).9 (,0). (,). (,). (,). (,) (,). (,). (,). (,). (,0). (,0) (,). (,0) 9. (,0). (,0) 9. (,) (,). (,) (,). (,0). (,0). (,) L 0 (,) (,) 0 (,) (,). (,). (,). (9,0). (,). (,) (,). (,9). (,0). (,9). (,). (,). (9,).9 (,). (,0). (,) (,). (,0) 9. (,). (,) 9. (,). (,9) (,). (,). (,). (,). (9,0).9 (,0) / () E90 (,) (,9) (,). (,0). (,) 9. (,). (,) (,) 9. (,0). (9,) (,9) (,) (,9). (,) (,0) (,).9 (,). (,). (,). (,9). (,0). (,9). (,). (9,) (0,) (,). (,). (,9) DT00 (,). (,). (,). (,) (,). (,0). (,9). (,0). (,0). (,). (,). (,). (,) (,). (,). (9,). (,) 9 (,) (9,) (,9) (,). (,). (,9) 9 (,9). (,0). (,) (9,). (,) (,). (9,) (9,) 9 (,9) (9,) E99 (,) 0 (,). (,9). (,9). (,9). (,) (,). (,9). (,) (,). (,). (,0). (9,) (,). (,). (,) 9. (,0) (,) 9. (,) (,). (,). (,9). (,). (,9) (,) 9. (,). (,). (,). (9,) () (,) () () L 0 (,) (,) 0 (,) (,). (,). (,). (,0). (,9). (,). (,). (,). (,). (,). (,) (,). (,) 9. (,0). (,). (,). (,). (,). (,) 9 (,9). (,). (,). (,0) (90,) () 9. () 9 (). () () /, (, ) E990 (,) (9,) (0,) (9,) (0,) 9 (,9) (0,) 9. (,) (,) (,) (90,) () (9,) () () () () () (9) () 9 () () () () () () () 9 () (9) (9) E990 (,). (,). (,). (,) (,) (,) (,0) (,0) (,). (,). (0,0) (9,) (9,) (90,) () (,). () () 9. (). (). () () () () () () (9) () 9 () () () () () - continued -
17 Bulletin.:9 Table 9. Water Relief Capacities in Gallons per Minute (l/min), Types 9H and 9HD with Metal Diaphragm (continued) NPS (DN) GPM (l/min) BUILD-UP OVER Part Number Color Code (0,) (,) (,) (,) (,) 0 /, (, ) E99 (,) 0 (,). (,9). (,9). (,9) (,) 9 (,) (,) (,9) (,). (,9) (,0) (,) (,) (,). (9,) () (9,) () () () () (9). () 9 () () () () 0. (9) () (). () () () () L 0 (,) (,) 0 (,) (,) (,) 9 (,) 9 (,) (,9) (,) (,) (,0). (,). (,). (9,) (,) (). () (9) 9 () () () (9) () (9) 9 () (0) (0) (0) 9 (99) () () -/, (, ) E909 Dark Gray. (,). (,). (,). (,). (,) (,) (,) (,) (9,) 9 () (,) () () (9) () () 9 () () () (9) () () 0 () () 0 () (0) () () () () () () () () 9 (0) 0 () () 0 () 9 () () (0) () (9) 9 () () 9 (99) 0 () () () () () 9 () () () () E90 Light (,) (,) (,) (,) (,) (,) (90,) () (90,) () () () () () () () () (9) () () () 0 () () 0 () (9) 0 () 90 () 0 (9) (9) 9 () () () 9 () (9) () 9 () (90) () (9) (9) () () (0) E9 Light Gray (,) 0. (9,). (9,). (9,) (,0) (,) (,) (9,) () (9) () () () () () () 0 () () 9 () 9 () (9) () () () () () 0 () () () 0 (0) () P0 Black (,) 0 (,) 0 (,). (,). (,). (,). (,) (,) (,9) (9,) (0,) (9,) (0,) (,) (,) (,) (9,) 9 () () () () (9) () (9) () 0 () () () () 0 () () 9 () 9 () (9) 9 (0) (9) () () (9) () 0 () () () () 0 () 9 ()
18 Bulletin.:9 Table. Steam Relief Capacities in Pounds per Hour (kg/h), Types 9H and 9HD with Metal Diaphragm Only NPS (DN) POUNDS/ HOUR (kg/h) BUILD-UP OVER Part Number Color Code (0,) (,) (,) (,) 0 / E90 (9,) (,) (,) (,) 9 (,) (9,0) 9 (,) (,) (,) (,) (,) (9,0) (,) 9 (,) (,) (,) (,) (9,9) (,) 0 (,0) 0 (,) (0,) 9 (,) (9,) (99,) () 0 () E90 (,) (,) (,9) 9 (,) (,) (,) (,) 9 (,) (,9) 0 (,) (,9) 9 (,) (,) 0 (,) 9 (9,) 0 (,0) (9,9) (,) (0,) 0 (,) 90 (,) () (9,) (9) 0 () 0 () 0 () () E9 (,) 0 (,) (,) (,9) (9,0) (,) (9,0) (,) (9,0) (,9) 9 (,) (,) 9 (,) (,) (,) (,) (,) (,) (0,) (,) 9 (,) () 0 () 0 () (0) () () () () L 0 (,) (,) 0 (,) (,) (,) (,) (,) (9,0) (,) (,) (,) (9,0) 9 (,) 0 (,) (,) (,) (9,9) (,) 0 (,) 0 (,) 9 (,) 0 () 0 () () 0 () 0 () () () () 90 / () E90 (,) (,) (,9) 9 (,) 9 (,) 0 (,) (,) (,) (,) 0 (,) 0 (,) (,9) 0 (90,) (99,) 0 () (9) 0 () (0) () 0 () () (9) () () () 0 (9) () DT00 (,) (9,0) (,) (,) (,) 9 (,) (9,9) (,) (,) (9,0) 0 (,) 0 (90,) (,) (9,) 0 () 0 () () 0 () 0 () () () () 0 (9) 0 () () () 0 () E99 (,) 0 (,) 9 (,) (,) (9,0) (,9) (,) (,) 0 (,) (,) 0 (,0) (,9) (9,) (,9) () 0 () 0 () 0 () 0 () () 90 () () 0 (9) 0 (90) (9) 0 (90) 9 () L 0 (,) (,) 0 (,) (,9) (,) 9 (,) (9,9) (,) (,) (,) (,) 0 (,) (,) 9 (,) () () 0 () 90 () () 0 () (9) () () () 9 () 00 () 00 () 0 (99) 0 () - continued -
19 Bulletin.:9 9 Table. Steam Relief Capacities in Pounds per Hour (kg/h), Types 9H and 9HD with Metal Diaphragm Only (continued) NPS (DN) POUNDS/ HOUR (kg/h) BUILD-UP OVER Part Number Color Code (0,) (,) (,) (,) 0 /, (, ) E990 9 (,) (,) (,) (,) 0 (,) 90 (,) 0 (,) () 0 () 0 () (0) 0 () 0 () 9 (9) () (0) () 90 0 () 0 (99) () 0 (9) () 9 () 9 () () 0 (99) L (,) (,) (9,9) 0 (,) (9,9) 0 (,) () 0 (,) (9,) () () () () (0) (9) () () (90) () () 9 () 0 (99) () 0 (99) () 9 () 0 (90) (0) E99 (,) 0 (,) (9,0) (,) (0,) 0 (,) (9,0) (9,) () 0 () () 0 (9) () () () () 90 0 () 0 (90) () 0 () 0 () () 00 () 0 (0) (0) 00 () 00 (90) L 0 (,) (,) 0 (,) (9,0) 9 (,) 0 (,) (,) () 0 (90,) () () () 0 (9) () () () () () 0 (9) 9 () 0 () () 00 () () 00 (90) 0 () 0 (99) 0 (9) 00 () -/, (, ) E909 Dark Gray (,) (,) (,) (,) (,) 0 () 0 () (0) (9) (9) (0) () () (9) () () () (9) 00 () () () 9 (9) 9 () 0 (99) () 9 () 0 () 0 () () (0) 0 (99) 0 (90) () () () () 0 (0) () (9) 0 () () 0 () 90 (9) () 90 () () 90 () 90 () 0 (9) 0 () E90 Light (,) (,) (,) (,) (,) 0 () () 0 (9) 0 () 0 () (0) () (9) (9) () 00 () () (9) () () () 00 () () () 00 () () (9) 0 (9) 0 (9) 0 (9) () (9) 0 () 0 () 90 () () (0) () () 90 () 0 (9) E9 Light Gray (,) 0 (,) (,) (,) (,) 90 (,) 0 () 0 (9) () 00 () () () () 00 () () 0 (90) 00 () (0) 00 () (0) 0 (99) () () 00 () 0 (9) 0 (9) () () 0 (9) () 0 () P0 Black (,) 0 (,) 0 (,) (,) (,) (,) (,) 0 (,0) 0 (9) () 0 () 0 () () () () () () () 00 () () () () () () (0) 00 () (0) (9) 0 () 0 (9) () () (9) (0) () () 0 (9) 00 () (0) () 0 () ()
20 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Types 9H and 9HD with Elastomer Diaphragm NPS (DN) Part Number Color Code SCFH (Nm /h) BUILD-UP OVER (0,) (,) (,) (,) 0 E90 00 (,9) 00 (,) 00 (,) 00 (,) (,9) 0 (,) 00 (,) 0 (9,0) 00 (,) 0 (,) (,0) (,) 90 (,) 00 (,0) (,) 00 (,) (,) (99,) (9,) () 00 () 0 (9) 0 () 00 () () 0 () () / E90 E9 (,) (,) 0 (,) (,) 00 (,9) 0 (,) 0 (,) 00 (,) 0 (,) 0 (,) 0 (,) 00 (,0) 00 (,9) 0 (,) (,0) 0 (,) 00 (,0) (99,) (,0) (9,) () 00 (,) 0 (9,) () (9,) 0 () 0 () (,) (99,) 0 () () 00 (0) () (99,) () 0 () (9) 0 (9) 0 (9) 00 () 0 () () 0 () () 00 () 00 () 0 () 00 () 00 () 00 () 900 () 00 () 00 () 00 () 00 () 9 () 000 (9) L 0 (,) (,) 0 (,) 00 (,0) 00 (0,) (,) 0 (,) (9,) 00 () 0 () (9) 00 (0) 0 () 00 () () 00 (0) 0 (9) 0 () 00 () 0 () 90 (9) 0 () 000 () () () () E90 0 (9,0) 00 (9,) 00 (,0) 00 (9,) (9,) () 0 (9,) 0 () 00 () 0 () 0 () () (9) () () 0 (9) 0 (9) 0 () 0 () 90 () () 000 (9) 000 () 00 () 00 (9) 00 () / () DT00 E99 (,) (,) 0 (,) 00 (,) () 0 () 00 (9,) (9,) () (,0) 00 () 0 () (9,) 0 () 0 () (9,) 00 () 000 () 0 () 0 (9) 00 () 0 () 000 () () 000 (9) 000 (9) 0 () 00 () 000 (9) () 0 () () 000 (9) () 000 (9) (9) 000 () (9) (9) 000 (9) 000 (9) (9) 000 () 00 () 000 () 000 () 000 () 000 () 000 () L 0 (,) (,) 0 (,) 0 (,) 0 (9,) (,) 00 () () 00 () 0 () () 000 () 000 () 0 () 0 () 000 (9) (9) 000 () 000 () 000 () 000 (0) 000 () 000 (9) 000 () 000 (9) 000 () 000 (0) - continued -
21 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Types 9H and 9HD with Elastomer Diaphragm (continued) NPS (DN) Part Number Color Code SCFH (Nm /h) (0,) BUILD-UP OVER (,) (,) (,) 0 E990 0 () 000 () 0 () () () () 00 () 900 (0) () () () (9) () 000 () () () 00 () (0) () 000 (9) (9) () 000 () /, (, ) E990 E99 (,) (,) 0 (,) () () () 0 () () 000 () () 000 () 000 () () 0 () () () 000 () (9) 000 () 000 () 000 () 000 () 000 () 000 () 000 () 000 (90) 000 () 000 () 000 () 000 () 000 () 000 (0) 000 () () 000 () 00 () 000 () () () 000 (9) () 000 (9) () 000 (9) 000 (9) () 000 () 000 () 000 (9) () () 000 () 000 () L 0 (,) (,) 0 (,) 0 () 00 () 00 () () 000 () () 0 () () () 000 () 000 () (9) 000 () 000 () 000 () 000 (9) 000 (9) 000 () () 000 () 000 () 000 (0) 000 () 000 (0) 000 () 000 (9) E909 Dark Gray (,) (,) (,) (,) (,) 0 (9) () 000 () 0 (9) 0 () 000 () 000 () 0 () (9) () 000 (9) 000 () 000 () 000 () 000 (90) 000 () 000 () 000 (9) () 000 () 000 (99) () 000 () 000 (9) 000 (99) 000 (99) 000 (99) 000 (9) 000 (0) 000 (9) () 000 () 000 () 000 () 00 () 000 (9) () 000 (9) 000 () 000 (9) 000 () -/, (, ) E90 Light (,) (,) (,) (,) (,) () 00 () 90 (9) 900 () 000 (9) () 000 () (9) (9) 000 () 000 () 000 (0) 000 (9) 000 () () 000 () 000 (99) 00 (0) 000 () 000 () 000 () 000 () 000 () 000 () () 000 () 0 (0) 000 () () 000 () 0 00 () () 000 () E9 Light Gray (,) 0 (,) (,) (,) 0 () 0 () 00 () (9) 0 () 900 (0) () 000 () 000 () 000 () 000 () () 000 () 000 (99) 000 (0) 000 () () 000 (90) () 000 () (00) 000 (9) (0) 000 (0) 000 () P0 Black (,) 0 (,) 0 (,) (,) (,) (,) (,) 00 () 00 (0) 0 () () () () 90 () 90 () () 000 () 000 () (9) 000 (90) 000 () 000 (90) 000 (9) 000 (0) 000 () 000 (9) 000 () 000 (0) 000 (9) 000 (9) 000 (90) 000 () (0) (9) 000 (9) 000 () 000 () 000 (9) () 000 () 000 ()
22 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Types 9H and 9HD with Metal Diaphragm NPS (DN) Part Number Color Code SCFH (Nm /h) (0,) BUILD-UP OVER (,) (,) (,) (,) 0 E90 9 (,) 00 (,) 0 (9,) (,) 0 (,) 0 (,) 0 (,) (,) 00 (,9) 00 (,9) 00 (,) (,9) (,9) 0 (,) 0 (,) 0 (,) 00 (,) (,) 00 (,) (,) (9,) (,) (9,) () () () () 0 () 0 () 00 () / E90 E9 (,) (,) 0 (,) (,) (,) 0 (,) 0 (9,) (,) 0 (,) 0 (9,) (,) 00 (,) (,) 0 (,) 00 (,) 0 (,) 00 (,) 0 (9,0) 0 (,) 00 (,) 00 (,) 00 (,) 00 (,) 00 (,) (,) 0 (,) (,0) 0 (9,0) 0 0 (,) 00 (,) 00 (9,) 00 (0,) (,) 00 (0,) () 00 (,0) 0 (9,) 00 () (9,) (9,) () (9,) () 0 () () () 0 () () (9) () () 0 () () 0 () 0 (9) () 00 () 0 () () 000 () 0 () 000 L 0 (,) (,) 0 (,) 00 (,) (,) 0 (9,) (,) 0 (,) (,) (,) 00 (,) (,9) 00 (,) 0 (9,0) 0 (,) (,0) (,) 00 (0,) (9,) 00 () () () 0 () 00 () () 0 () () 000 () (9) E90 (,) 00 (,9) 00 (,) 00 (,) 0 (,) 0 (9,0) (,0) 00 (,) 00 (0,) (9,) () () () () 00 (0) 0 () 0 () 0 (9) 0 (9) 0 (9) 0 () 0 (9) 000 () () 90 () 0 () 0 (0) 00 () 00 () 00 () / () DT00 E99 (,) (,) 0 (,) 0 (,) 00 (,9) 00 (,) 0 (,) 00 (,) (,9) (,) 00 (,) 0 00 (,) 0 (,) (,0) 0 (,) 00 (9,) (,) 0 (9,0) 00 (0,) 0 (,) (,) (9,) 0 () (,) () 00 () (99,) 0 () 00 () () 0 () () 00 () () 0 () 0 () 000 () 00 () 000 () 00 () () (9) (9) () 000 (9) () 000 () 000 () 000 () (9) () 00 (9) 000 () 000 (9) (9) 000 () L 0 (,) (,) 0 (,) 00 (,) 00 (,) 00 (,) 0 (9,0) 0 (,) 00 (,) 00 (,0) 00 (0,) (9,) () () 0 () 0 () 00 () 0 () () 0 () 90 () 0 () 000 (9) () 000 () 000 () 000 (90) 000 (90) 000 () 000 (9) - continued -
23 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Types 9H and 9HD with Metal Diaphragm (continued) NPS (DN) /, (, ) -/, (, ) Part Number E990 E990 E99 L E909 E90 E9 P0 Color Code Dark Gray Light Light Gray Black (,) (,) 0 (,) 0 (,) (,) 0 (,) (,) (,) 0 (,) 0 (,) 0 (,) SCFH (Nm /h) (,) (,) (,) (,) (,) (,) (,) (,) (,) (,) (,) (,) (,) (,) (,) (,) 00 (,) 00 (,) 00 (0,) (,) (,0) 00 () (,) 00 (0,) (,) (,9) 00 (,) (9,) () 0 (9) () () 00 () () 00 (0) 000 () 000 () 0 () () 00 (,) 00 (0,) 000 () 0 (9) (0,) 00 (0,) 00 () () (,0) (9,) (9) 0 (9,) (9,) () 00 (0,) (,) 0 () 00 () 000 () 000 (9) 00 () 000 () 00 () 90 (9) 000 (9) 000 () () 000 () 000 () 0 () 000 BUILD-UP OVER 00 () (9) () (9,) 0 () 000 () 0 () 0 () 0 () () 0 () 000 () () () (9) 000 (9) 000 () 000 (9) 000 () 000 (9) 000 () () () 000 () 0 () 000 () () 000 () 00 () 0 (9) 000 () (9) () () 00 () 9 () () 00 () (9) 000 () 9 () 000 (90) 000 () (9) 000 () 000 () 000 (0) 000 (9) 000 () 000 (9) 000 () 000 () 000 () 000 () (,) () 00 () (9) 9 () 000 () 90 () (9) 000 () 000 () 000 () 000 () 000 () 000 (0) 000 () 000 () () 000 () 000 () 000 (0) 000 (9) 000 () 000 () 000 (0) 000 () (,) 0 (9) 0 () 000 (9) 000 (9) 000 () 000 () () (9) 000 (9) 000 () 000 () 000 () 00 (9) 000 () 00 () 000 () 000 () 000 (99) 000 () 000 () 000 (0) 000 (9) 000 () 000 (0) 000 (99) 000 () 000 () (,) 000 () 00 () 00 (0) 000 () 000 (90) 000 () 000 () 000 (0) 000 (90) 000 () 000 () 000 () 000 (0) 00 () 000 (99) 000 () 000 (9) 00 () 000 () () () 000 () () 000 (99) 000 (0) 000 () 000 (9) () 00 () 0 () 000 () 000 () 000 (0) 000 () 000 (9) 000 () 000 () 000 (0) 000 (9) 00 () 000 (9) 000 (99) 000 () 000 (0) 000 (99) 000 () 000 () 000 () 000 (0) (0) 000 (9) 000 () () 000 (90) 000 (9) (,) 000 () 000 () 00 () 00 (9) 000 () 000 (0) 000 (0) 000 (9) () 000 () 000 () 000 (9) 000 (9) 00 () () 000 () 00 (0) 000 (9) 000 () (9) 000 (9) 000 () () 000 () 000 (9) () 000 (9) 000 (9) 0 (0) 000 () 000 (9) 000 (9) 00 () 000 (9) 000 (9) 000 () 000 () 000 () 000 () (0) 00 (9) 00 (0) 000 () 00 () () 000 () () 00 () 00 (9) (09) 0 00 (0) (0) () 000 (9) 000 () 000 ()
24 Bulletin.:9 Table. Water Relief Capacities in Gallons per Minute (l/min), Types 9HH and 9HHD with Elastomer Diaphragm NPT PART NUMBER OF ZINC PLATED GPM (l/min) BUILD-UP OVER (,) (,) (,) (,) 0 / N9 0 (,) (,) 0 (,). (,). (9,). (,). (,). (,) (,). (,9). (,). (9,) (,9). (,0). (,) (,). (,). (,0). (,). (9,). (,). (9,). (,9) 9. (,0). (,) 9. (,). (9,) 9.9 (,) (,) (,). (,) (,0). (,) (0,). (,). (,) 0 (,) 0 (,) (,9) (,). (,) (,) (,) (,). (,) (,) 9 (,) (,9) (,) (,9) (9,) (,9) (,) (,) (,0) (9,) (,0) (0,) (0,) (,) (,) (,) (,) (,) / N9 0 (,) (,) 0 (,). (,) (,). (,). (,). (,) (,) (,9). (9,). (,) (9,). (,9) (0,) (,) (,) (,) (9,) (,) (,) (,) (9,) (,) (9,) () (9,) 9 () () (9) () () () () (0) 0 (,) 0 (,) (,9). (,) (,9). (9,).. (,). (,9). (,) (,). (,). (,) (0,) (,) (90,) (9,) (9,) () () () () () () 9 () () () () (9) /, N9 0 (,) (,) 0 (,) (,) (,) 9 (,). (,) (0,) 9 (,9) (,) (,) (9) () () () () (0) (9) (9) () () () () () () () 0 () () (0) () () () 9 9 (0) 0 (,) 0 (,) (,9) 9. (,0) (,9) (,). (,). (,) (90,) (9,) () () () () () () () () (0) () (0) () 9 (99) () (9) 90 () 0 (9) 99 () 9 () - Shaded areas show where maximum inlet pressures are exceeded.
25 Bulletin.:9 Table. Water Relief Capacities in Gallons per Minute (l/min), Types 9HH and 9HHD with Metal Diaphragm NPT PART NUMBER OF ZINC PLATED GPM (l/min) BUILD-UP OVER (,) (,) (,) (,) 0 / N9 0 (,) (,) 0 (,) (,). (,). (,) (,). (,9). (,0). (,9). (,). (,). (9,).9 (,). (,). (,) (,). (,0). (,) (,). (,0). (,0). (,). (,0) 9. (,) 9. (,) 9. (9,). (,9). (,). (,). (,). (,). (,). (9,0) 0 (,) 0 (,) (,9). (9,0). (,) (,). (,). (,). (,9) (,9). (9,). (,). (,). (,). (,). (,9). (,). (,).. (,) 9. (,) 9. (,0) (,9). (9,) (,) (,).0 (,0). (,9) (0,). (,) / N9 0 (,) (,) 0 (,) (,). (,). (,). (,). (,). (,). (,). (,) (,). (,) 9. (,0). (,) (,9). (,). (,) (,). (,) (,0). (,). 9 (,9) (9,). (,). (,0). () () 9. () () (). () 0 (,) 0 (,) (,9). (,9). (,). (,). (,0) (,). (,). (,0). (,). (,9). (9,) (,). (,). (,) (,). (,). (,) (0,). (,) (,) 9. (,) (,). (,) (,) (). (). () () /, N9 0 (,) (,) 0 (,) (,). (,9). (,) (,). (,) (,) (,). (,) (,). (,) (0,) 9 (,9) (,) (9,) (,) (90,) (9,) (9,) () () () () (9) () () () () () () (0) () 0 () 0 (,) 0 (,) (,9). (,). (,) (,9). (,) 9 (,) (,9). (,) (9,) (,) (9,) (,) (90,) (9,) () () () (9) () () () () () () (0) () - Shaded areas show where maximum inlet pressures are exceeded.
26 Bulletin.:9 Table. Steam Relief Capacities in Pounds per Hour (kg/h), Types 9HH and 9HHD with Metal Diaphragm Only NPT PART NUMBER OF ZINC PLATED POUNDS/ HOUR (kg/h) BUILD-UP OVER (,) (,) (,) (,) 0 / N9 0 (,) (,) 0 (,) (,) (,) (,) (,) (,) (9,9) (9,9) 9 (,) 9 (,) (,) (,) (,) (,) 0 (,0) 0 (,) (,) (0,) (,) 0 (90,) (9,0) (9,) 9 (9,) (9,) (9) 9 () () () () (9) (9) () () 0 (,) 0 (,) (,9) (,) (9,) (,) (,) 0 (,) (,) 9 (,) 9 (,0) 0 (,) (,) (9,9) (,) (9,9) 9 (,) (,9) (,) (,) (9,) (9,9) (9,9) () () () () () () () / N9 0 (,) (,) 0 (,) (,9) (,) 9 (,) 0 (,) (,) (,) (,) (,9) 9 (,) 9 (,) () 0 () 9 () 90 () 9 () () () () () (9) (9) (9) () () 90 0 () () 9 () 00 () 00 () 90 (9) 0 () 0 (,) 0 (,) (,9) 9 (,) 9 (,) 9 (,0) (,) (,) 9 (,) (,) (,0) (0,) () () (9) 9 () 0 () () 9 () () (9) (9) () () 0 () () () () () () /, N9 0 (,) (,) 0 (,) (,) (,0) (,) (,) (9,9) (,0) (9,) () 0 () () () () () () () (9) () 0 () 0 () () () () (9) 9 () () 0 () 90 (9) 90 () 0 () 0 () 90 (9) (0) 0 () 0 (,) 0 (,) (,9) 9 (,) 9 (,) 0 (,) (,) 9 (,) (9,) () 9 () () () (9) () () 90 (9) (0) () (9) 9 () 00 () () 0 () () 0 (0) 9 () 0 (0) 90 () - Shaded areas show where maximum inlet pressures are exceeded.
27 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Types 9HH and 9HHD with Elastomer Diaphragm NPT PART NUMBER OF ZINC PLATED / N9 / N9 /, N9 0 (,) (,) 0 (,) 0 (,) 0 (,) (,9) 0 (,) (,) 0 (,) 0 (,) 0 (,) (,9) 0 (,) (,) 0 (,) 0 (,) 0 (,) (,9) SCFH (Nm /h) 0 (,) 0 (,) (,) 00 (,) 0 (,) 0 0 (,) 0 (9,) (9,) (9,) (99,) 00 (,) 00 (0,) (9,) (99,) () 00 () - Shaded areas show where maximum inlet pressures are exceeded. (9,) () 00 () () () 0 (9) 00 () 0 () () 0 () 0 (9) 0 () 0 () () 0 (9) () 9 () 000 (9) BUILD-UP OVER 0 () 0 () () () 000 () 0 (9) () 000 () 0 () 90 () 90 (9) 90 () 0 () () () 000 (0) (,) () 000 () () () 0 () (9) 000 () () (9) 000 () 000 (9) 000 () 000 (90) 000 (0) 000 () 0 (9) 00 () 00 () 000 () () 000 (9) () 000 () 000 () 000 () 000 (90) 000 () 000 (9) 000 () 000 () (,) 00 () 0 () 90 (9) () (9) 000 () 000 () (9) (0) 000 (0) 000 () 000 () 000 () 000 (99) 000 () () 900 () 000 (9) () (9) 000 () 000 () 000 () () 000 () 000 () 000 (9) 000 () (,) 0 () 0 () () 000 () 000 () 000 () 000 (0) () 000 () 000 (9) 000 () 000 () 000 (9) 0 () 000 () () 000 () 000 () 000 (9) 000 () 000 () 000 () () 000 (9) () 000 () (,) () () 000 (9) 000 () 000 () 000 (9) 000 (0) 000 () 000 (9) 000 () 000 (9) 000 () 000 () 000 () () 000 (9) (9) 000 (9) 000 () 000 () 000 (9) 000 () 000 (0) 000 () 000 (9) 000 () 000 ()
28 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Types 9HH and 9HHD with Metal Diaphragm NPT PART NUMBER OF ZINC PLATED / N9 / N9 /, N9 0 (,) (,) 0 (,) 0 (,) 0 (,) (,9) 0 (,) (,) 0 (,) 0 (,) 0 (,) (,9) 0 (,) (,) 0 (,) 0 (,) 0 (,) (,9) SCFH (Nm /h) (,) 00 (,) (,) (,) 9 (,) 00 (,) 00 (,) 00 (,) 00 (,) (,9) 0 (,) (,) (,) (,) 00 (,) 00 (,) 0 (,) 0 (9,0) - Shaded areas show where maximum inlet pressures are exceeded. (,) 0 (,) (,9) (,) (,) 00 (,9) 0 (9,0) 0 (,) 00 (,) (,) 00 (,0) (,) 00 (0,) 0 (9,) () 00 () () () BUILD-UP OVER 9 (,) 00 (,) (,9) 0 (,) (,) 0 (9,0) (,) (,) (9,) (99,) () () () 0 () () () () () (,) (,0) 00 (9,) 00 (,) 00 (,0) (,) 00 (0,) () () 0 () 0 () (9) 0 () () 000 () () 0 () 9 () () 00 (0,) (,) 0 (,) 0 (9,) (9,) (9,) () 00 () 0 () () 00 () 00 (0) 000 () 000 (9) () (,) (9,) () () 00 () () () () 00 (9) () 000 () () 000 () 000 () 000 () 000 () 00 () 0 () () 0 () 0 (9) () 0 () 90 () 9 () 900 () () 000 (9) 000 () (9) 000 () (,) () 00 () 0 () 0 (9) (9) 0 () 900 () 000 (9) () () (9) 000 () 000 (90) 000 () 0 () 00 () 00 () () 0 (9) () () 000 (9) (0) () 000 () 000 (9) 000 () (,) 000 () 0 () 0 () 0 () () 000 () 000 (90) (0) 000 () 000 (9) (9) 000 (99) () 000 () 0 9 () 000 () () () 000 (90) 000 () 000 (9) () 000 () 000 () () 000 () 000 (9) 000 ()
29 Bulletin.:9 Table. Air Relief Capacities in SCFH (Nm /h), Type 9HM with Elastomer Diaphragm NPT SET RANGE, PART NUMBER, AND COLOR, SCFH (Nm /h) BUILD-UP OVER (,) 0 to (,0 to,) E990 0 (9,0) 00 (9,) 00 (,0) 0 (9,) 0 () 00 () (9) () () 0 () 90 () () 00 () 00 (9) 00 () / to (, to,) E990 0 to (, to 9,) E99 (,) (,) 0 (,) 00 (,) () 0 () 00 (9,) (9,) () (9,) 00 () 000 () 0 () 0 (9) 00 () 0 () 00 () 000 (9) () () 000 (9) (9) 000 () (9) 00 () 000 () 000 () 000 () 000 () 000 () to 0 (9,0 to,) L 0 (,) (,) 0 (,) 0 (,) 0 (9,) 00 () 0 () () 0 () 000 (9) () 000 () 000 (0) 000 (9) 000 () 000 (0) to (,0 to,) E990 0 () 000 () 0 () 00 () 900 (0) () () () () 00 () (9) () 000 () /, to (, to,) E990 0 to (, to 9,) E99 (,) (,) 0 (,) () () () 0 () () 000 () () () 000 () (9) 000 () 000 () 000 (90) 000 () 000 () 000 (),00 (),000 () 9,000 () () 000 (9) () 000 () 000 (9) () () 000 () 000 () to 0 (9,0 to,) L 0 (,) (,) 0 (,) 0 () 00 () 00 () 0 () () (9) 000 () 000 () 000 () () 000 () 000 (0) 000 () 000 (9) to (0, to,) E909 Dark gray (0,) (0,) (,) (,) (,) (,) (,) 0 (9) () 000 () 0 (9) 0 () () 000 (9) 000 () 000 (9) () 000 () 000 (99) 000 (99) 000 (9) 000 (0) 000 (9) () () 000 (9) 000 () 000 (9) 000 () -/, to (, to,) E90 Light blue (,) (,) (,) (,) (,) () 00 () 90 (9) 900 () 000 () 000 () (9) (9) 000 () () 000 () 000 (99) 000 () 000 () 000 () () 000 () 0 00 () () 000 () to 0 (, to,9) E9 Light gray (,) 0 (,) (,) (,) 0 () 0 () 00 () () 000 () () 000 () () 000 (90) () (0) 000 (0) 000 () 0 to 0 (, to,) P0 Black (,) 0 (,) 0 (,) (,) (,) (,) (,) 00 () 00 (0) 0 () () () 000 () 000 (90) 000 (9) 000 (0) 000 () 000 (9) 000 (90) 000 () (0) 000 (9) () 000 () 000 () 9
P303 Pressure Regulator
P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationFluid Cooling Industrial PF Series
Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure
More informationIBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationIBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDirect-operated 2/2-way compact solenoid valves Type EV210A
Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together
More informationANSI/ISA/IEC Valve Sizing Introduction and Sizing Valves for Liquids
ANSI/ISA/IEC Valve Sizing Introduction and Sizing Valves for Liquids Standardization activities for control valve sizing can be traced back to the early 960 s when an American trade association, the Fluids
More informationUse N 1, if sizing the valve for a flow rate in volumetric units (gpm or m 3 /h).
ANSI/ISA/IEC Valve Sizing Catalog 2 March 202 Page 2 Introduction Standardization activities for control valve sizing can be traced back to the early 960's when an American trade association, the Fluids
More informationABOUT US MISSION STATEMENT
PL-0B PLUG VALVE ABOUT US FBV Inc. is an ISO 00 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valve and butterfly
More informationFS-1601C (EN) FORGED STEEL VALVE
FS-0C (EN) ABOUT US FBV Inc. is an ISO 00 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves
More informationSolenoid valves 2/2-way direct-operated type EV210A
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.
More informationCartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
More informationTarget Insertion Flowmeter
Principle of Operation Flow is measured in terms of dynamic force acting on a target (solid disk) in the flow stream. Hermetically sealed, bonded strain gages in a bridge circuit configuration mounted
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationxanik API 6D Trunnion Ball Valves
API 6D Trunnion Ball Valves BV - XANIK SIDE ENTRY TRUNNION BALL VALVES table of contents BALL VALVES INDEX BV - XANIK SIDE ENTRY TRUNION BALL VALVES BV - 3 XANIK BALL VALVE DESIGN FEATURES BV - 4 thru
More informationPR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
More informationDirect-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
More informationSta-Saf. System. The. BSBsystems.com BSB.ie Visit our website for the most complete, up-to-date information. Reverse Buckling Technology
Catalog # 77-4001 The Sta-Saf System Reverse Buckling Technology BSBsystems.com BSB.ie Visit our website for the most complete, up-to-date information. 1 Sta-Saf System The Sta-Saf System includes 11 reverse
More informationPneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
More informationWorking pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.
8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel
More informationPrima range. Alifter range. magnetical driven pumps in thermoplastic materials TMP TMA. centrifugal. self-priming
Prima range TMP centrifugal Alifter range magnetical driven pumps in thermoplastic materials TMA self-priming Prima - Alifter In this catalog Argal proposes the range of PRIMA pumps, magnetical driven,
More informationValve Selection Guide
Valve Selection Guide Series Inlet Sizes Available Metals Min. Temp F ( C) 0 / to - -( ) 0 ( ) Yes 00 (.) Air/Gas / Steam / Liquid ASME VIII, CE, CRN / to /Bronze - -( ) ( ) Yes 0 (.) Air/Gas / Steam /
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationSeries P0 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1934, 1843 Rev. : C, D Rev. Date : 6/01, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE SPACER, E.P.U PUMP HEAD RETURN LINE (PRESSURE RELIEF) METERING PUMP HOUSING STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT POWER
More information/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
More informationO-Ring Design Guide REGISTERED QMS. ISD
O-Ring Design Guide ISO 9001 REGISTERED QMS ISD Table of Contents O-Ring Design Guide Hi-Tech Seals Inc. Compound Specifications 3 Machining Specifications 4 O-Ring -Section 4 O-Ring Gland Types 4 ID Stretch/OD
More informationPro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More informationMONITOR REGULATOR SIZING AND OTHER CONSIDERATIONS
MONITOR REGULATOR SIZING AND OTHER CONSIDERATIONS 6" 4" 6" 4" 4" 8" 4" 6" 6" 8" 6" 6" OGA 015 Regulator Fundamentals Seminar Monitor Regulator Sizing Theory FLOW in m out USTREAM MONITOR REGULATOR DOWNSTREAM
More informationConversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationAnnubar Primary Element Flow Calculations
Rosemount 485 Annubar Annubar Primary Element Flow Calculations ANNUBAR PRIMARY ELEMENT FLOW EQUATIONS The Annubar primary element flow equations are all derived from the hydraulic equations which are
More informationThe Ultimate Innovators
Product Over view america, inc. The Ultimate Innovators www.yamadapump.com Yamada Corporation S ince its beginning in 1905, Yamada has been at the forefront in developing the most complete line of air
More informationType M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
More informationWorking pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationNote to reviewers: See next page for basis for the change shown on this page. L-3160 TANGENTIAL CONTACT BETWEEN FLANGES OUTSIDE THE BOLT CIRCLE
ASME BPVC.III.A-2017 ð17þ L-3160 TANGENTIAL CONTACT BETWEEN FLANGES OUTSIDE THE BOLT CIRCLE The design procedure is based on the assumption that the flanges are in tangential contact at their outside diameter
More informationElectromagnetic Flowmeter
Overview Flokal B.V. smart electromagnetic flow meter is hallmarked by its high performance and reliability that are based on successful, field-proven technology. It s being widely used in industries such
More informationPolígono Indutrial O Rebullón s/n Mos - España -
FB 8 Polígono Indutrial O Rebullón s/n. 646 - Mos - España - rodavigo@rodavigo.com SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Polígono Indutrial
More informationChemistry Instrumental Analysis Lecture 31. Chem 4631
Chemistry 4631 Instrumental Analysis Lecture 31 High Performance Liquid Chromatography (HPLC) High Performance Liquid Chromatography (HPLC) High Performance Liquid Chromatography (HPLC) Solvent Delivery
More informationDM70 Hand-Held Dewpoint Meter for Spot-Checking Applications
DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications The Vaisala DRYCAP Hand-Held Dewpoint Meter DM70 offers accurate and fast measurement for industrial dewpoint applications, such as compressed
More informationSolenoid valve Types EVR 2 - EVR 40
Data sheet Solenoid valve s EVR 2 - EVR 40 EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with HCFC and HFC refrigerants. EVR valves are supplied complete or as
More informationSERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
6 FMP SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat
More information405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook
Reference Manual 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book and Flow Handbook www.rosemount.com Reference Manual 405 and 1595 405 Compact Orifice Series and 1595 Conditioning
More informationSolenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with
More information405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook
405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book and Flow Handbook www.rosemount.com 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book NOTICE Read
More informationFVBSS fixed volume bottle
N FVBSS fixed volume bottle Sampling System The SENSOR Fixed Volume Bottle Sampling System (FVBSS) provides a repeatable fixed volume of sample during each sampling process without stopping flow of the
More informationTOTAL HEAD, N.P.S.H. AND OTHER CALCULATION EXAMPLES Jacques Chaurette p. eng., June 2003
TOTAL HEAD, N.P.S.H. AND OTHER CALCULATION EXAMPLES Jacques Chaurette p. eng., www.lightmypump.com June 2003 Figure 1 Calculation example flow schematic. Situation Water at 150 F is to be pumped from a
More information01-99 FLUID FLOW BASICS OF THROTTLING VALVES
01-99 FLUID FLOW BASICS OF THROTTLING VALVES FLUID FLOW BASICS OF THROTTLING VALVES FLUID PARAMETERS The following fluid parameters are frequently associated with throttling valves Inlet Cond 1 Cond 2
More informationmandata_us :43 Pagina 83 (1,1) FHB 82
8 FHB SERIES FHB Working pressure 4600 psi Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body ( M a t e r i a l s ) Head: Cast iron (chemical heat tre a t
More informationThe 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
More informationNon Newtonian Fluid Dynamics
PDHonline Course M417 (3 PDH) Non Newtonian Fluid Dynamics Instructor: Paul G. Conley, PE 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.pdhonline.org
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
More informationSmartLine Radar Level Meter RM70
Page 1 of 5 SmartLine Radar Level Meter Model Selection Guide Reliable measurement in difficult process conditions +/- 3 mm / +/-0.12" standard accuracy Operates up to a flange temperature of 200 0 C /
More informationCatalog # The Sta-Saf System. Reverse Buckling Technology A SME
Catalog #77-4001 The Sta-Saf System Reverse Buckling Technology A SME Sta-Saf System The Sta-Saf System includes 11 reverse buckling rupture disk models. These rupture disks offer the optimum performance
More informationModel Selection 1. Process Valves. Air. Vacuum
Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air One-touch fittings
More information2.3 T214 PTFE-LINED BUTTERFLY VALVE T 214 TECHNICAL DATA
-INED BUTTERFY VAVE T ug type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal diameter: 0 Face-to-face:
More informationConductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
More informationPro-V Multivariable Flowmeter Model M22 In-line Vortex
Pro-V Multivariable Flowmeter Model M22 In-line Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More informationJDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual
JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual 1. Please read this manual before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved and
More informationChapter 3 Basic Physical Principles Applications to Fluid Power Sy S stems
Chapter 3 Basic Physical Principles Applications to Fluid Power Systems 1 Objectives Identify and explain the design and operation of the six basic machines. Describe the factors that affect energy in
More informationCMA - B - C - D - CMR
Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA:
TECNICA DATA: ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. Nominal diameter: Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS Series NF E -0.
More informationSINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron
Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D
More informationPolígono Indutrial O Rebullón s/n Mos - España -
FP 5 Polígono Indutrial O Rebullón s/n. 646 - Mos - spaña - rodavigo@rodavigo.com SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Polígono Indutrial O Rebullón s/n. 646
More informationSample and Bleed Valves
Pure-Flo Sample and Bleed Valves www.ittpureflo.com Application The Pure-Flo product line of Sample and Bleed Valves provides compact and economical means to extract process samples and bleed off excess
More informationTRUNNION BALL VALVE BA-1401D (EN)
TRUNNION BALL VALVE BA-1 (EN) ABOUT US FBV Inc. is an ISO 1 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationWAFER PATTERN BUTTERFLY TYP Z 011-A
TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: 0 ( only PN0/) Face-to-face: EN
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More information405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook
405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book and Flow Handbook www.rosemount.com 405 and 1595 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationOdor Removal Filter Series AMF
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
More informationTurbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
More informationAME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg)
Super Mist Separator Series AME Series AME separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oilless equivalent air. It should be
More informationLES. Single-stage end-suction pumps Identification Type key
Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction
More information5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
More informationPiB Series. PiB (Pump-in-a-Box) 4380 & 4392 Series
PiB Series PiB (Pump-in-a-Box) & 9 Series FILE NO: - DATE: July SUPERSEDES: - DATE: January 09 PiB Series Guaranteed In Stock At The Right Price! The PiB series builds on the high quality and unsurpassed
More informationCooling Water Flow Regulator
Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data
More information507F. Multi-Port Sanitary Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. Pharmaceutical. Bio-Technology.
507F Multi- Sanitary Ball Valve Full ISO 5 Mounting Pad For Automated & Manual Service Pharmaceutical Bio-Technology Cosmetic Food & Beverage The 507F Series //5-Way Sanitary Ball Valve The 507F is a true
More informationDMHP3(4)L(T)2A00 Series
STANDARDS Valve body: ASME B16.34 Material certification: EN10204-3.1 MTR Quality assurance: ISO 9001:2008 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve test: API 598 Direct mount: ISO 5211 End
More informationTurbulent Compressible Flow in a Slender Tube
Turbulent Compressible Flow in a Slender Tube Kurt O. Lund* 1, and Christine M. Lord 2 1 COMSOL Consultant, 2 Lord Engineering Corp. *Corresponding author: 135 Sixth Street, Del Mar, CA 92014, kurtlund@roadrunner.com
More information2/3 Port Valves for Fluid Control Model Selection 1
/ Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each
More information2/3 Port Valves for Fluid Control Model Selection 1
/ Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each
More informationCompressible Gas Flow
Compressible Gas Flow by Elizabeth Adolph Submitted to Dr. C. Grant Willson CHE53M Department of Chemical Engineering The University of Texas at Austin Fall 008 Compressible Gas Flow Abstract In this lab,
More informationTHE VERSATILE VSP2: A TOOL FOR ADIABATIC THERMAL ANALYSIS AND VENT SIZING APPLICATIONS
THE VERSATILE VSP2: A TOOL FOR ADIABATIC THERMAL ANALYSIS AND VENT SIZING APPLICATIONS Charles F. Askonas, Dr. James P. Burelbach, and Dr. Joseph C. Leung Fauske and Associates, Inc. 16W070 W. 83 rd Street
More informationNormally Closed (N.C.), Normally Open (N.O.), Common (C.O.)
Series VVX// The models VX// have been revised. For details, please refer to catalog no. ES0-A. Similar updating Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Courtesy of Steven Engineering,
More information2.1 T211 PTFE-LINED BUTTERFLY VALVE T 211 TECHNICAL DATA
-INED BUTTERFY VAVE T Fully -lined wafer type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with highcorrosive applications. TECNICA DATA Nominal diameter:
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)
More informationMaximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
More informationDOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ.
LOREM IPSUM JE ZULT MAAR HZ m Head m/s m/s m/s m/s m/s Ø m Ø Ø Ø Ø l/s Flow kw Shaft power P Ø m/h Ø 9 Ø Ø kw 9 Total input power P Ø DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, xv AP-, AKP- and AEP-
More informationIdentification Number
Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationFlow Meter FVone-NP-CA. FVone-NP-CA 11 (Plug-in type) (Screw-in type) Recommended for: DN 20 DN 80 Required accessory: Cable type 31.
FVone-NP- 00/ (Push-in type) Recommended for: DN and bigger Required accessory: Threaded installation bush able type Optional accessory: PTFE sealing ring Locking set FVone-NP- 0/0 (Screw-in type) Recommended
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 3/8" to 4" Female BSP + 0 C + 90 C ( 60 C for 302 and 322 types ) Max Pressure : 16 Bars ( 10 bars for 301-302 types ) Specifications : Swing type Metal
More informationGuidelines for the Selection and Operation of Provers with Micro Motion ELITE Coriolis Flow Meters
Guidelines for the Selection and Operation of Provers with Micro Motion ELITE Coriolis Flow Meters Micro Motion ELITE flow meters are highprecision Coriolis flow meters that are often used in the oil and
More information