LITTLE CHAMP TM POWER UNITS 3 to 25 Gallon Reservoir Capacity L I T T L E C H A M P TM P O W E R U N I T S

Size: px
Start display at page:

Download "LITTLE CHAMP TM POWER UNITS 3 to 25 Gallon Reservoir Capacity L I T T L E C H A M P TM P O W E R U N I T S"

Transcription

1 LILE HM M OWER UNIS 3 to Gallon Reservoir apacity L I L E H M M O W E R 80 U N I S

2 bar 100xka M-10N LILE HM M OWER UNIS 3 to Gallon Reservoir apacity Little hamp M ower Units are designed for use in locations where space is limited and larger noisier power units are not needed. hey re ideal for applications requiring moderate fluid volume and flow rate, short hydraulic lines, and quick cycling. ypical applications include use with: ilting and umping Equipment Optical Grinding Equipment ar Wash Equipment ommercial rash ompactors Little hamp M systems are ready to use, with all but the actuators plumbed. Little hamp M ower Units are the perfect choice for applications involving frequent stops and starts, where localized power is needed, or where the noise and vibration of a larger power unit would be distracting. Relief Valve 100- SI djustable (Standard On "R"-lock, Optional On Multi-Station Manifolds) ombination Filler/ir reather (10 Micron) Electric Motor Junction ox 10 GM Return Filter With SI ypass In Head and 10 Micron Nominal Spin On Element Mounting Holes, Qty 4 EF Frame Electric Motor Electric Motor Junction ox EF -face Electric Motor oolant-resistant Show lue Vinyl aint On ll Little hamps 10 Ga. HRO 1020 Steel On ll Little hamps Foam Gasket Keeps irborne irt Out, Reduces Vibration and Noise Return lumbing (lumbed On "R"-lock and Multi-Station Manifolds) Removable op late (3/16" HRO 1020 Steel) Liquid Filled ressure Gauge With uilt-in Snubber Flexible rive ouplings nd ump/motor dapter On ll Little hamps ressure ompensated, Variable Volume ontinental Vane ump, or a Fixed isplacement Gear ump Fully lumbed Inlet Foam Gasket Keeps ir orne irt Out, Reduces Vibration and Noise hree Optional ressure onnections: 1.) ""-ort -8 Male JI 2.) "R"-lock -8 Female SE ressure ort -8 Female SE Return ort 3.) Multi-Station 03 Manifold (4 Stations Max) -8 Female SE "" ort -8 Female SE "" ort ombination Filler/ir reather (10 Micron) Relief Valve 100- SI djustable (Standard On "R" lock, Optional On Multi-Station Manifold) hree Optional ressure onnections: 1.) "" ort -8 Male JI 2.) "R" lock -8 Female SE ressure ort -8 Female SE Return ort 3.) Multi-Station 03 Manifold (4 Stations Max) -8 Female SE "" ort -8 Female SE "" ort olor oded Filter ondition Indicator Return lumbing 10 GM Return Filterwith SI ypass In Head and 10 Micron Nominal Spin On Element Removable op late (3/16" HRO 1020 Steel) Neoprene hannel Gasket Keeps ir-orn irt Out, Reduces Vibration and Noise Fixed isplacement Gear ump Oil Level/emperature Indicator With Glass ube nd rotective luminum Housing Mounting Holes, Qty 4 Strainer Sized o ass 2-3 imes ump Maximum Flow at Minimum ressure rop 3/4" N Magnetic rain lug 1/2" N rain lug Strainer Sized o ass 2-3 imes ump Maximum Flow at Minimum ressure rop 81

3 LILE HM M OWER UNIS WIH GER UMS 3 to 5 Gallon Reservoir apacity OX OX OX OX G V V2R GER UM ELERI MOOR RESERVOIR RESSURE MNIFOL G0.630 G0.830 G1.130 G1.630 G2.030 G2.327 G3.026 G RM MX. RESS MX RESSURE SI SELE GER UMS S REQUIRE FROM GES 118 N 119 OF HIS LOG S S S S HORSE OWER 1/2 1/2 3/4 3/ /2 1-1/2 3V 5V VOLGE 1800 RM SIZE GLLONS 3 5 FRME SIZE R V1R V2R V3R V4R MNIFOLS RESSURE LOK WIH UIL-IN RELIEF -8 SE "" & "" ORS FEMLE SINGLE SION O3 MNIFOL UIL-IN RELIEF -8 SE "" & "" ORS FEMLE WO SION 03 MNIFOL UIL-IN RELIEF -8 SE "" & "" ORS FEMLE HREE SION 03 MNIFOL UIL-IN RELIEF -8 SE "" & "" ORS FEMLE FOUR SION 03 MNIFOL UIL-IN RELIEF -8 SE "" & "" ORS FEMLE WIH VLVES N OL KIS S REQUIRE. SELE FROM ONINENL HYRULIS VLVE LOGS NOE: 1. OMLEE OION ESRIIONS RE GIVEN IN HE ESSORY SEION OF HE OLY SYSEMS ENER LOG. 2. SULE N MNIFOL IMENSIONS RE GIVEN IN HE ONINENL HYRULIS SULE N MNIFOL LOG. 3. UM N MOOR RNGES LISE FOR EH RESERVOIR SIZE RE SNR OMINIONS. FOR SEIL OMINIONS LESE ISUSS YOUR LIION WIH YOUR ONINENL HYRULIS ISRIUOR OR HE FORY YIL ORERING G V-V2R (ower Unit) VS5M-3-G-60L (ir. ontrol Valve) Qty 2 N5S-N-G-S (Flow ontrol Valve) Qty (olt Kit) Qty 2 82

4 LH M-10N U OLY SYSEMS ENER RELE ELEMEN REGULRLY WIH R # V/5V WIH R LOK imensions - Little hamp M SE "" & "" ORS (FEMLE) MX FRME SIZE (SHOWN) 1/2" N RIN LES SHEMI SYMOL -8 SE "" N "" ORS G3N 3/4" FR10 1/2" 1" 1/2" N RIN FILLER REHER 5V SHOWN SIGH GUGE IMENSIONS MOOR FRME 3V 5V NO. OF SIONS S S S S RESERVOIR 3V V GENERL SEIFIIONS 3V 5V RESERVOIR IY 3 U.S. GL. 5 U.S. GL. (11.36 Liters) (18.93 Liters) SURFE RE FOR HE RNSFER 2.22 SQ. F SQ. F. HE ISSIION = 50 EG F..09 H.12 H SI WEIGH (LESS OIL, UM, N MOOR) 41 LS. 47 LS. USLE GLLONS GLLONS ER INH RISE IY, FULL O O LE 4.37 Gal Gal. IY, HIGH ON SIGH GUGE 3.42 Gal Gal. IY, LOW ON SIGH GUGE 2.34 Gal Gal. UM See pages 114 through 115 for complete codes and specifications. FLOW RNGE U O 6 G..M. U O 6 G..M. RESSURE RNGE U O S.I. U O S.I. OWER RNGE.5-3 H.5-3 H 83

5 LH M-10N U OLY SYSEMS ENER RELE ELEMEN REGULRLY WIH R # V/5V WIH MNIFOL imensions - Little hamp M MX FRME SIZE (SHOWN) /2" N RIN SHEMI SYMOL LES -8 SE RESSURE & REURN ORS G3N 3/4" FR10 1/2" 1" 1/2" N RIN -8 SE RESSURE & REURN ORS (FEMLE) FILLER REHER 5V SHOWN SIGH GUGE IMENSIONS MOOR FRME 3V 5V S S S S RESERVOIR 3V V GENERL SEIFIIONS 3V 5V RESERVOIR IY 3 U.S. GL. 5 U.S. GL. (11.36 Liters) (18.93 Liters) SURFE RE FOR HE RNSFER 2.22 SQ. F SQ. F. HE ISSIION = 50 EG F..09 H.12 H SI WEIGH (LESS OIL, UM, N MOOR) 41 LS. 47 LS. USLE GLLONS 2.02 GL GL. GLLONS ER INH RISE.36 GL..36 GL. IY, FULL O O LE 4.37 GL GL. IY, HIGH ON SIGH GUGE 3.42 GL GL. IY, LOW ON SIGH GUGE 2.34 GL GL. UM See pages 114 through 115 for complete codes and specifications. FLOW RNGE U O 4 G..M. U O 4 G..M. RESSURE RNGE U O -.S.I. U O -.S.I. OWER RNGE 3 H 3 H 84

6 LILE HM M OWER UNIS WIH GER OR VNE UMS 10 to Gallon Reservoir apacity OX OX OX OX OX OX V V V2 E HE3 UM YE RESERVOIR ELERI MOOR RESSURE MNIFOL JUSING SREW HE EXHNGER G0.630 G0.830 G1.130 G1.630 G2.030 G2.327 G3.026 G G G G G5.030 G6.830 G8.730 G G V4 VR6-4 V6 VR6-6 V8 VR6-8 V10 VR RM MX. RESS MX. RESSURE SI S S S S S S HORSE OWER 1/2 1/2 3/4 3/ /2 1-1/ /2 10 SIZE GLLONS 10V 15V 20V V VOLGE 1800 RM FRME SIZE R LNK E** EV LNK HE3 HE3R HROUGH NK JUSING SREW NO JUSMEN OION EXERNL RESSURE JUSMEN (VNE UMS ONLY) EXERNL VOLUME JUSMEN (VNE UMS ONLY) HE EXHNGER NO SE RIN OOLER IR O OIL OOLER HE-3 FOR SE RIN -12 SE 10 SI YSS (ONINENL VR6 ONLY) IR O OIL OOLER HE-3 FOR REURN LINE -12 SE 10 SI YSS ** IF "E" IS NO SELEE, SEIFY RESSURE SEING. UM REQUIRES VOLUME ONROL 6 (VR6-***-RF-O-6) MNIFOLS -8 JI MLE RESSURE ONNEION RESSURE LOK WIH UIL-INRELIEF -8 SE "" & "" ORS FEMLE SELE VNE UMS S REQUIRE FROM ONINENL HYRULIS VNE UM LOG SELE GER UMS S REQUIRE FROM GES 118 N 119 OF HIS LOG NOE: 1. OMLEE OION ESRIIONS RE GIVEN IN HE ESSORY SEION OF HE OLY SYSEMS ENER LOG. V1 V1R V2 SINGLE SION O3 MNIFOL -8 SE "" & "" ORS FEMLE SINGLE SION O3 MNIFOL UIL-IN RELIEF -8 SE "" & "" ORS FEMLE WO SION O3 MNIFOL -8 SE "" & "" ORS FEMLE 2. MNIFOL IMENSIONS RE GIVEN IN HE ONINENL HYRULIS SULE N MNIFOL LOG. V2R WO SION O3 MNIFOL UIL-IN RELIEF -8 SE "" & "" ORS FEMLE 3. UM N MOOR RNGES LISE FOR EH RESERVOIR SIZE RE SNR OMINIONS. FOR SEIL OMINIONS LESE ISUSS YOUR LIION WIH YOUR ONINENL HYRULIS ISRIUOR OR HE FORY YIL ORERING V V-V1-E-HE3 (ower Unit) VS5M-3-G-60L (Flow ontrol Valve) N5S-N-G-S (ir. ontrol Valve) 03-0, (olt Kit) V3 V3R V4 V4R HREE SION 03 MNIFOL -8 SE "" & "" ORS FEMLE HREE SION 03 MNIFOL UIL-IN RELIEF -8 SE "" & "" ORS FEMLE FOUR SION 03 MNIFOL -8 SE "" & "" ORS FEMLE FOUR SION 03 MNIFOL UIL-IN RELIEF -8 SE "" & "" ORS FEMLE SELE VLVES S REQUIRE FROM RORIE ONINENL HYRULIS LOG 85

7 bar 100xka U OLY SYSEMS ENER RELE ELEMEN REGULRLY WIH R # V - V OR WIH VR6 VNE UM imensions - Little hamp M 0.44 HOLE (4 LES) 3.00 MX Y. EXERNL VOLUME USMEN (OION) (VR6 ONLY) SHEMI SYMOL 1" N FR10 10V SHOWN G F FILLER REHER G3N 1/2" -8 JI 1" 3/4" N MGNEI RIN H MX FRME SIZE 213/ 215 (SHOWN) 1" N REURN (FR10) -8 JI RESSURE ONNEION (MLE) 1.13 I E 2.00 EXERNL VOLUME USMEN (OION) (VR6 ONLY) J SIGH GUGE 3/4" N MGNEI RIN IMENSIONS MOOR FRME 10V/20V 15V/V S S S S S S RESERVOIR E F G H I J 10V V V V GENERL SEIFIIONS 10V 15V 20V V RESERVOIR IY 10 U.S. GL. 15 U.S. GL. 20 U.S. GL. U.S. GL. (37.85 Liters) (56.78 Liters) (75.70 Liters) (94.63 Liters) SURFE RE FOR HE RNSFER 4.55 SQ. F SQ. F SQ. F SQ. F. HE ISSIION = 50 EG F..179 H.249 H.5 H.317 H SI WEIGH (LESS OIL, UM, N MOOR) 77 LS. 87 LS. 103 LS. 115 LS. USLE GLLONS GLLONS ER INH RISE IY, FULL O O LE Gal Gal..00 Gal Gal. IY, HIGH ON SIGH GUGE Gal. 15. Gal Gal..45 Gal. IY, LOW ON SIGH GUGE 7.17 Gal Gal Gal Gal. UM See ontinental Hydraulics VNE UM LOG for complete codes and specifications. FLOW RNGE U O 11 G..M. U O 11 G..M. U O 11 G..M. U O 11 G..M. RESSURE RNGE U O -.S.I. U O -.S.I. U O -.S.I. U O -.S.I. OWER RNGE U O 10 H U O 10 H U O 10 H U O 10 H 86

8 0 RELE ELEMEN REGULRLY WIH R # U OLY SYSEMS ENER 60 10V - V R LOK WIH VR6 VNE UM imensions - Little hamp M Ø 0.44 HOLE (4 LES) 3.00 MX EXERNL VOLUME USMEN (OION) SHEMI SYMOL -8 SE RESSURE N REURN ORS G3N FR10 F G FILLER REHER 1" 1/2" 3/4" N MGNEI RIN MX FRME SIZE 213/ 215 (SHOWN) -10 SE REURN ONNEION (FEMLE) 10V SHOWN 1.69 H I J E EXERNL RESSURE JUSMEN (OION) 1. SIGH GUGE 3/4" N MGNEI RIN IMENSIONS MOOR FRME 10V/20V 15V/V S S S S S S RESERVOIR E F G H I J K 10V V V V GENERL SEIFIIONS 10V 15V 20V V RESERVOIR IY 10 U.S. GL. 15 U.S. GL. 20 U.S. GL. U.S. GL. (37.85 Liters) (56.78 Liters) (75.70 Liters) (94.63 Liters) SURFE RE FOR HE RNSFER 4.55 SQ. F SQ. F SQ. F SQ. F. HE ISSIION = 50 EG F..179 H.249 H.5 H.317 H SI WEIGH (LESS OIL, UM, N MOOR) 77 LS. 87 LS. 103 LS. 115 LS. USLE GLLONS 6 GL GL GL GL. GLLONS ER INH RISE 1.04 GL GL GL GL. IY, FULL O O LE GL GL..00 GL GL. IY, HIGH ON SIGH GUGE GL. 15. GL GL..45 GL. IY, LOW ON SIGH GUGE 7.17 GL GL GL GL. UM See ontinental Hydraulics VNE UM LOG for complete codes and specifications. FLOW RNGE U O 11 G..M. U O 11 G..M. U O 11 G..M. U O 11 G..M. RESSURE RNGE U O -.S.I. U O -.S.I. U O -.S.I. U O -.S.I. OWER RNGE U O 10 H U O 10 H U O 10 H U O 10 H 87

9 0 RELE ELEMEN REGULRLY WIH R # U OLY SYSEMS ENER 60 10V - V MNIFOL WIH VR6 VNE UM imensions - Little hamp M Ø 0.44 HOLE (4 LES) 3.00 MX EXERNL VOLUME USMEN (OION) SHEMI SYMOL G3N -8 SE "" N "" ORS (FEMLE) 3/4" -8 SE "" N "" ORS (FEMLE) F G FILLER REHER FR10 MX FRME SIZE 213/ 215 (SHOWN) 10V SHOWN K I H J E 2.00 EXERNL RESSURE JUSMEN (OION) 1. SIGH GUGE 3/4" N MGNEI RIN 1/2" 1" 3/4" N RIN IMENSIONS MOOR FRME 10V/20V 15V/V NO. OF SIONS S S S S S S RESERVOIR E F G H I J K 10V V V V GENERL SEIFIIONS 10V 15V 20V V RESERVOIR IY 10 U.S. GL. 15 U.S. GL. 20 U.S. GL. U.S. GL. (37.85 Liters) (56.78 Liters) (75.70 Liters) (94.63 Liters) SURFE RE FOR HE RNSFER 4.55 SQ. F SQ. F SQ. F SQ. F. HE ISSIION = 50 EG F..179 H.249 H.5 H.317 H SI WEIGH (LESS OIL, UM, N MOOR) 77 LS. 87 LS. 103 LS. 115 LS. USLE GLLONS GLLONS ER INH RISE IY, FULL O O LE Gal Gal..00 Gal Gal. IY, HIGH ON SIGH GUGE Gal. 15. Gal Gal..45 Gal. IY, LOW ON SIGH GUGE 7.17 Gal Gal Gal Gal. UM See ontinental Hydraulics VNE UM LOG for complete codes and specifications. FLOW RNGE U O 11 G..M. U O 11 G..M. U O 11 G..M. U O 11 G..M. RESSURE RNGE U O -.S.I. U O -.S.I. U O -.S.I. U O -.S.I. OWER RNGE U O 10 H U O 10 H U O 10 H U O 10 H 88

10 Whether you need one Little hamp or a dozen, we can deliver! 89

11

Flow rates to 590 l/min

Flow rates to 590 l/min LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball

More information

Air Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7

Air Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7 ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan

More information

HYDRAULIC POWER PACKS

HYDRAULIC POWER PACKS HYDRULI POWER PKS Typical Electric Wiring Diagram (D Pack) HYDRULI POWER PKS Hydraulic Pump Hydraulic Valve Hydraulic ccessory pplication Oder ode System Power Packs SISSOR LIFT POST LIFT JP0 SISSOR LIFT

More information

1) Actual pressure drop required for each metering land, up to the specified maximum flow rate is: Q ΔP actual. ) 2 PSI; (Q in GPM) actual Q rated

1) Actual pressure drop required for each metering land, up to the specified maximum flow rate is: Q ΔP actual. ) 2 PSI; (Q in GPM) actual Q rated tlog HY14-255/US echnicl Informtion Generl escription proportionl directionl control vlves re high performnce, two stge pilot operted solenoid vlves with electronic spool position feedck, nd on-ord integrted

More information

Fluid Cooling Shell & Tube EC Series

Fluid Cooling Shell & Tube EC Series Fluid ooling hell & Tube eries 01 O & TL OTTIO erformance otes ugged steel shell construction /" tube size Larger shell diameter than K,.0" maximum diameter High flow capacity & performance High efficiency

More information

CF (Conflat Flange) Fittings - Adapters. (505)

CF (Conflat Flange) Fittings - Adapters.  (505) F (onflat ) 1 Fittings - dapters www.idealvac.com (505)72-0037 1 Vacuum Fittings - dapters - olt Kits F - onflat F onflat flanges (F) are used for ultra- Vin elasmer gaskets can be used over and over but

More information

Valve Products ADEX Series Valves

Valve Products ADEX Series Valves atalog 000-2US X alves X is a miniature low power consumption solenoid valves, ideal for powering small to mid-sized pneumatic actuators used in automation and process applications. X's versatility is

More information

Cartridge Valves Technical Information. Quick reference

Cartridge Valves Technical Information. Quick reference Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...

More information

FLUID COOLING Shell & Tube EC Series

FLUID COOLING Shell & Tube EC Series FLID OOLIG hell & ube eries opper & teel ostructio Features rugged teel hell ostructio / ube ize larger hell Diameter tha EK,. Dia Ma High Flow apacity & erformace High Efficiecy Fied udle Desig Optioal

More information

4KB1/2/3/4 Series. Applicable cylinder bore size: 20 to 160mm. Pilot operated soft spool valve. Compressed air

4KB1/2/3/4 Series. Applicable cylinder bore size: 20 to 160mm. Pilot operated soft spool valve. Compressed air Discrete vlve Su se porting, port pilot operted vlve K1/2// Series pplicle cylinder ore size: 20 to 0mm CD DT VILLE. JIS symol port vlve 2position single port vlve 2position doule port vlve position ll

More information

LMP 210. Style B. Style S. Maximum pressure 60 bar F l o w r a t e s t o l / m i n

LMP 210. Style B. Style S. Maximum pressure 60 bar F l o w r a t e s t o l / m i n LMP 0 Style S Style Maximum pressure 60 bar F l o w r a t e s t o 7 0 l / m i n 6 Technical data Filter housing (Materials) Head: luminium Housing: nodised luminium ypass valve: Nylon - Steel Pressure

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information

CONTACTOR COIL Rolla, Missouri, USA. machmotion.com TEMPERATURE SWITCH PUSH BUTTON CNC CONTROL SYSTEM

CONTACTOR COIL Rolla, Missouri, USA. machmotion.com TEMPERATURE SWITCH PUSH BUTTON CNC CONTROL SYSTEM ISIONS SYMOL LE SYMOL G ESRIPION R RELY OIL ON, M, K SOL OR OIL SOLEI Rolla, Missouri, S RK MGNEI RKE ON --99 PRS PROXIMIY SIH S EMPERRE SIH P PSH ON MR SP xxyy SHL OMPONEN G FORM r s R S N PS R OL IS

More information

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00 FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel

More information

AIR BREATHER FILTERS. Temperature from -25 to +100 C

AIR BREATHER FILTERS. Temperature from -25 to +100 C IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of

More information

THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.

THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC. P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE

More information

FLUID COOLING Shell & Tube EC Series

FLUID COOLING Shell & Tube EC Series ourtesy of M/Flodye/Hydradye Motio otrol Hydraulic eumatic Electrical Mechaical (00) -0 www.cmafh.com WE OOLED FLID OOLIG hell & ube eries opper & teel ostructio Features rugged teel hell ostructio / ube

More information

5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT

5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped

More information

MICRO-AIR SERIES. miniature direct solenoid actuated valves

MICRO-AIR SERIES. miniature direct solenoid actuated valves R-R SERES miniature direct solenoid actuated valves RR i c r o i r d i r e c t s o l e n o i d a c t u a t e d m i n i a t u r e v a l v e s T E D T................................................... 3

More information

AIR BREATHER FILTERS. Temperature from -25 C to +100 C

AIR BREATHER FILTERS. Temperature from -25 C to +100 C IR RETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of

More information

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials) Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:

More information

ISO 05 Parallel Circuit with Relief Cavity. t a. T 3A Cavity Locating Shoulder. Depth 0,8 0

ISO 05 Parallel Circuit with Relief Cavity. t a. T 3A Cavity Locating Shoulder. Depth 0,8 0 R MNIFOLDS luminium red o r nd S Iron red o 35 r. See ge viii for ordering crridge/ody nd sels. ressure rings, meril secificions on ge xiv. ISO 5 rllel Circui wih Relief Cviy FUNCION One Sion 3 Cviy Locing

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information

TPH Series WALRUS PUMP. Multi-stage Centrifugal Pump. All specifications are subject to change without notice. 014

TPH Series WALRUS PUMP. Multi-stage Centrifugal Pump. All specifications are subject to change without notice. 014 T Series WLRUS PUMP ll specifications are subject to change without notice. Multistage entrifugal Pump T T pplications The WLRUS T Series is horizontal multistage centrifugal pump, suitable for clean water/liquid

More information

CME / CM-GE / DCME IN-LINE CONSTANT PRESSURE PUMPS. TECHNICAL DATA - CME/CM-GE single flanged

CME / CM-GE / DCME IN-LINE CONSTANT PRESSURE PUMPS. TECHNICAL DATA - CME/CM-GE single flanged CIRCUTORS ND IN-INE UMS ENERGY EFFICIENCY Circulation pups with in-line ports, suitable for installation in heating and air conditioning, refrigeration, and doestic hot water systes. Extreely versatile

More information

Element description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre

Element description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre Style FZ Stainless Steel Pressure filter Technical data element Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working pressure:

More information

ENERGY CONVERSION IN A FLUID POWER SYSTEM. Preview GRC. mechanical friction. File name GA: FLOW GENERATING GROUP. traen_eng GRC: CONTROL GROUP

ENERGY CONVERSION IN A FLUID POWER SYSTEM. Preview GRC. mechanical friction. File name GA: FLOW GENERATING GROUP. traen_eng GRC: CONTROL GROUP PRIME MOVER (electric motor, IC engine) ENERGY CONVERSION IN FLUID POWER SYSTEM P P mech mech (exended) P P (useful) hydr hydr rotary shaft G M, Q, Q, M, F, v P W GRC P W GU oil ies oil ies rotary shafts,

More information

PRESSURE GAUGE SELECTORS

PRESSURE GAUGE SELECTORS PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed

More information

barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"

barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8 Discharge: 8 Spherical solids handling: 3 SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE

More information

Flow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min

Flow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division

More information

1/8 Solenoid Operated Directional Valves, DSG-01 Series. Max. Operating Pressure Kgf/cm {Spool Type 60 Only 250}

1/8 Solenoid Operated Directional Valves, DSG-01 Series. Max. Operating Pressure Kgf/cm {Spool Type 60 Only 250} /8 Solenoid Operted Directionl Vlves, DSG- Series WID RNG OF MODLSChoose the optimum vlve to meet needs from lrge selection ville. DIRCIONL CONROLS IC--- he DSG- series solenoid operted directionl vlve

More information

Mark 55, SPA55 & PA55 Series

Mark 55, SPA55 & PA55 Series single solenoid open center single solenoid pilot closed center pilot 5 orted, 2 and 3 position, 4-way, Spool & Sleeve v: 5.5 Direct solenoid, solenoid pilot, or air pilot actuated lug-in solenoid with

More information

MPF SERIES RETURN FILTER

MPF SERIES RETURN FILTER MPF SERIES The series of filters MPF has specifically been designed for use on mobile applications, agricultural machinery and power units. The MPF filter range is suitable for flow rates up to 750 l/min.

More information

Return fi lters. MPI series. Maximum working pressure up to 1 MPa (10 bar) - Flow rate up to 3000 l/min

Return fi lters. MPI series. Maximum working pressure up to 1 MPa (10 bar) - Flow rate up to 3000 l/min Return fi lters series Maximum working pressure up to MPa (0 bar) Flow rate up to 000 l/min 0 Return fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction Calculation

More information

Maximum pressure 80 bar

Maximum pressure 80 bar Maximum pressure 80 bar F l o w r a t e s t o 0 0 l / m i n LMP 0 Maximum pressure 80 bar F l o w r a t e s t o 6 0 l / m i n Technical data LMP 0 Filter housing (Materials) Head: luminium Housing: ataphoresis

More information

LECTURE 6- ENERGY LOSSES IN HYDRAULIC SYSTEMS SELF EVALUATION QUESTIONS AND ANSWERS

LECTURE 6- ENERGY LOSSES IN HYDRAULIC SYSTEMS SELF EVALUATION QUESTIONS AND ANSWERS LECTURE 6- ENERGY LOSSES IN HYDRAULIC SYSTEMS SELF EVALUATION QUESTIONS AND ANSWERS 1. What is the head loss ( in units of bars) across a 30mm wide open gate valve when oil ( SG=0.9) flow through at a

More information

Emerson Climate Technologies (India) Limited Karad Dhebewadi Road Karad INDIA

Emerson Climate Technologies (India) Limited Karad Dhebewadi Road Karad INDIA merson limate echnologies (ndia) Limited MRR MDL R53KQM-D-XXX (@ 50 Hz) BLL MRL 101, 102, 103, 201, 202, 203 ote : ales compressor drawing number and compressor model name are the same. 1 01 urrent merson

More information

Elevator Control Valves

Elevator Control Valves E 00 Elevator ontrol alves IO 00 he LIN E 00 program includes the widest range of options offered to the elevator industry for high performance passenger service. Easy to install, E 00 s are smooth, reliable

More information

T h e C S E T I P r o j e c t

T h e C S E T I P r o j e c t T h e P r o j e c t T H E P R O J E C T T A B L E O F C O N T E N T S A r t i c l e P a g e C o m p r e h e n s i v e A s s es s m e n t o f t h e U F O / E T I P h e n o m e n o n M a y 1 9 9 1 1 E T

More information

High Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min

High Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction

More information

DE-TYPE SHUNTING LOCO MOTOR OF THE DUTCH RAILWAYS SERIES

DE-TYPE SHUNTING LOCO MOTOR OF THE DUTCH RAILWAYS SERIES THIS DRWING REMINS THE PROPERTY OF JDW DRUGHTING SERVIES J..M.DE WL, RIGHTWELL STREET PPKUR NEW ZELND (09)9 IF IN DOUT SK DE-TYPE SHUNTING LOO MOTOR OF THE DUTH RILWYS SERIES 0-. THE FOLLOWING INFORMTION

More information

Bulkhead Fitting Product Guide

Bulkhead Fitting Product Guide 1/2" TO 3" PV OMPRSSION FITTING * oes not come with bulkhead fitting MTRILS Robust PV Upper and Lower ody onstruction PV ell lass 12454 per STM 1784 Stainless Steel Wave Spring 17-7 PH Stainless Steel Fits

More information

FMM 050 uk :26 Pagina 5 (1,1) FMM 050

FMM 050 uk :26 Pagina 5 (1,1) FMM 050 uk 6-07-006 9:6 Pagina 5 (,) 30 uk 6-07-006 9:6 Pagina 5 (3,) SRIS Working pressure 80 bar Style S Style Style T Style D 3 uk 6-07-006 9:6 Pagina 7 (,) Technical data Filter body ( M a t e r i a l s )

More information

Solenoid Operated Relief Valve

Solenoid Operated Relief Valve Solenoid Operted Relief lve JIS grphic symbols for hydrulic system Refer to the next pge. Fetures Low-noise models with further improvement on noise chrcteristics nbles circuit unloding nd dul/triple pressure

More information

( Single Case Construction )

( Single Case Construction ) OVL FLOWMETER Meter Size:,,,, ( Single ase onstruction ) Pocketless Design GENERL SPEIFITION GS.No.GBB--E GENERL The OVL flowmeter is a positive displacement type flowmeter comprising a pair of oval gear

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)

More information

Flow rates to 475 l/min

Flow rates to 475 l/min FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass

More information

Vortex Flow Meters. RVL Series Vortex Flow Meter

Vortex Flow Meters. RVL Series Vortex Flow Meter TM Vortex Meters RVL Series Vortex Meter pplications: Water/Wastewater I Water: Semiconductor, Institutional I Water Skids Semiconductor Equipment Slurry hemical Processing RINE FEERTE IN. ISO 900 : 000

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)

More information

Pumping Stations Design For Infrastructure Master Program Engineering Faculty-IUG

Pumping Stations Design For Infrastructure Master Program Engineering Faculty-IUG umping Stations Design For Infrastructure Master rogram Engineering Faculty-IUG Lecture : umping Hydraulics Dr. Fahid Rabah Water and environment Engineering frabah@iugaza.edu The main items that will

More information

SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I. 6 FMP SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat

More information

LCC***N**S. A/F (mm) Size G 1/2 G 3/4 G 1 G 1 1/4 G 1 1/2 G 2 G60. Ø hole for Expansion kit. Size. Diamètre G20 G26 G33 G42 G48.

LCC***N**S. A/F (mm) Size G 1/2 G 3/4 G 1 G 1 1/4 G 1 1/2 G 2 G60. Ø hole for Expansion kit. Size. Diamètre G20 G26 G33 G42 G48. eries L***N imensions L***N** L***N**K Ø E /F G F L***N***** (Materials) ody: Nylon Lens: Polyamide 3 ontrast screen: Nylon eals: NR Inorganic fibre 5 Expansion kit: rass NR L/N 5 3 5 L***N Example: L

More information

Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I. 5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)

More information

Working pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.

Working pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I. 8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel

More information

PRODUCT DATA SHEET MODEL: SUK-0084

PRODUCT DATA SHEET MODEL: SUK-0084 PRODUCT DATA SHEET MODEL: SUK-0084 SPECIFICATIONS: MODEL NUMBER: SUK-0084 PUMP DESIGN: Positive displacement 3 chamber diaphragm pump CHECK VALVE: No CAM: 2 MOTOR: 4 Pole Induction VOLTAGE: 230VAC PRESSURE

More information

COMMON BLACK IRON & BLADE PARTS

COMMON BLACK IRON & BLADE PARTS LT RD HD SW PP 0 PP KIT, ALL BLADE LABEL 0 LABEL, BLADE CENTER 0 0 0 0 KIT, LABEL BLACK IRON COVER, HYDRAULICS 0 KIT, COTTER () / R PIN () PLOW PACK KIT, GREASE ZERK ( PACK) CONTROLS / MODULES CONTROL

More information

RELEASE 1 DWG NO * * 21S WASHER/DRYER STACKED

RELEASE 1 DWG NO * * 21S WASHER/DRYER STACKED RELESE TE WG ZONE ISION REOR TE FTR-ORIG REQUIRES GLLONS RV NTIFREEZE 9-0-000 PER TOLIET. FOLLOW TEM TOLIET WINTERIZTION PROEURE. GLUE FITTING FTER INET IS INSTLLE. 0 PPLY PRIMER -0-000 N EMENT -0-000

More information

RELEASE 1 DWG NO * * 21S WASHER/DRYER STACKED

RELEASE 1 DWG NO * * 21S WASHER/DRYER STACKED RELESE TE WG ZONE ISION REOR TE FTR-ORIG REQUIRES GLLONS RV NTIFREEZE 9-0-000 PER TOLIET. FOLLOW TEM TOLIET WINTERIZTION PROEURE. GLUE FITTING FTER INET IS INSTLLE. 0 PPLY PRIMER -0-000 N EMENT -0-000

More information

RELEASE 1 DWG NO 10 PREP THE SURFACE PER MANUFACTURERS INSTRUCTIONS, BEFORE APPLYING THE HEATING PAD.

RELEASE 1 DWG NO 10 PREP THE SURFACE PER MANUFACTURERS INSTRUCTIONS, BEFORE APPLYING THE HEATING PAD. RELESE TE 99 ZONE ISION REOR TE FTR-ORIG 9 0 J RINGE SYSTEM-HETE-W/O 0 PREP THE SURFE PER MNUFTURERS INSTRUTIONS, EFORE PPLYING THE HETING P. 9 T RINGE SYSTEM-HETE TOILET 9 WTERLESS P-TRP MUST E INSTLLE

More information

DATE 2 RELEASE REV DRAINAGE SYSTEM INSTL 21S WASHER/DRYER STACKED

DATE 2 RELEASE REV DRAINAGE SYSTEM INSTL 21S WASHER/DRYER STACKED RELESE ZONE TE ISION REOR 90 TE FTR-ORIG REQUIRES GLLONS RV NTIFREEZE 9-0-000 PER TOLIET. FOLLOW TEM TOLIET WINTERIZTION PROEURE. GLUE FITTING FTER INET IS INSTLLE. 0 PPLY PRIMER -0-000 N EMENT -0-000

More information

Model Selection 1. Process Valves. Air. Vacuum

Model Selection 1. Process Valves. Air. Vacuum Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air One-touch fittings

More information

Cipriani Harrison Valves Corp.

Cipriani Harrison Valves Corp. Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle

More information

M/60210/M Miniature rotary actuators

M/60210/M Miniature rotary actuators M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL

More information

Y1SA Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

Y1SA Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS TEHNIAL SPEIFIATIONS Y1SA Series EarthDirEX Geothermal Direct Geoexchange Heat Pump ooling capacity,000 to 0,000 Heating capacity 1,000 to,000 EER 19.0 to.0 and OP.8 to.0 The Y1SA Geothermal heat pump,

More information

Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface

Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the

More information

Nickel-Plated Brass Push-In Fittings - NPTF/INCH

Nickel-Plated Brass Push-In Fittings - NPTF/INCH /INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings

More information

High Pressure fi lters. FHA 051 series. Maximum working pressure up to 56 MPa (560 bar) - Flow rate up to 140 l/min. High Pressure fi lters

High Pressure fi lters. FHA 051 series. Maximum working pressure up to 56 MPa (560 bar) - Flow rate up to 140 l/min. High Pressure fi lters High Pressure fi lters FHA 0 series Maximum working pressure up to 6 MPa (60 bar) Flow rate up to 0 l/min 99 High Pressure fi lters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE FACTOR Page Introduction

More information

214 DISHWASHER DRAWER STYLE 10 APPLY PRIMER AND CEMENT BETWEEN ELBOW AND FLEX PIPE.

214 DISHWASHER DRAWER STYLE 10 APPLY PRIMER AND CEMENT BETWEEN ELBOW AND FLEX PIPE. RELESE TE WG 09 ZONE ISION REOR TE FTR-ORIG S WSHER/RYER STKE OES/STNRS US OES/STS-S,MVSS E WSHER RYER M WSHER/RYER PREP ISHWSHER RWER STYLE 0 PPLY PRIMER -0-000 N EMENT -0-000 ETWEEN ELOW N FLEX PIPE.

More information

Emerson Climate Technologies (India) Private Limited Karad Dhebewadi Road Karad INDIA

Emerson Climate Technologies (India) Private Limited Karad Dhebewadi Road Karad INDIA merson limate echnologies (ndia) rivate Limited MRR MDL merson limate echnologies (ndia) rivate Limited Karad Dhebewadi Road Karad - 415 110 D ote: ales compressor drawing number and compressor model name

More information

Directional spool valve types WMM6 hand lever operated WMD6 rotary knob operated WMR6 roller operated WH6 hydraulically operated NS6 31,5 MPa 80

Directional spool valve types WMM6 hand lever operated WMD6 rotary knob operated WMR6 roller operated WH6 hydraulically operated NS6 31,5 MPa 80 Directionl spool vlve types MM6 hnd lever operted MD6 rotry kno operted MR6 roller operted H6 hydruliclly operted NS6 31,5 M 80 dm 3/min K 420 170 08.2008 LICION Directionl spool vlves re intended for

More information

Clausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Clausing Industrial, Inc. Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm

More information

FLOW DIVIDERS "XV 3 serie" ENGLISH VERS:

FLOW DIVIDERS XV 3 serie ENGLISH VERS: FLOW DIVIDERS "XV serie" ENGLISH VERS:07-0-01 0 VERS:0-0-008 XV-D FLOW DIVIDER XV-G FLOW DIVIDER + MOTOR This is the flow divider standard version, it simply divide the incoming flow without allowing the

More information

SERIES. Maximum pressure 8 bar

SERIES. Maximum pressure 8 bar SERIES Maximum pressure 8 bar F l o w r a t e s t o 0 0 l / m i n OLD MPF 00 NEW MPF 00 8 75 80 5-6 5,5 5,5 Nr. holes Ø 8,5 55 55 Nr. slots Ø 8,5 Up to: G NPT SAE 6 Up to: G / SAE 0 DIFFERENCE BETWEEN...

More information

Thermal-Magnetic / Magnetic Only Molded Case Circuit Breakers Introduction

Thermal-Magnetic / Magnetic Only Molded Case Circuit Breakers Introduction Thermal-Magnetic / Magnetic Only Molded ase ircuit reakers Introduction Table 8: reakdown of Typical atalog Number L 3 6 0 V 2 reaker amily Y - mpere rame - mpere rame K - 2 mpere rame L - mpere rame M

More information

1B1 CODES/STANDARDS USA 11 GLUE FITTING AFTER CABINET IS INSTALLED.

1B1 CODES/STANDARDS USA 11 GLUE FITTING AFTER CABINET IS INSTALLED. RELESE TE WG 09 ZONE ISION REOR TE FTR-ORIG E G REQUIRES GLLONS RV NTIFREEZE 9-0-000 PER TOLIET. FOLLOW TEM TOLIET WINTERIZTION PROEURE. S WSHER/RYER STKE OES/STNRS US GLUE FITTING FTER INET IS INSTLLE.

More information

High Pressure Ball Valves

High Pressure Ball Valves High Pressure all Valves 0,, 0, 0,000 psi (0 bar),000 psi (0 bar) 0,000 psi ( bar) ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 ax: + 00 ITOK, Inc.

More information

Max. Operating Pressure. Min. *2 Required Pilot Pres. Max. Pilot

Max. Operating Pressure. Min. *2 Required Pilot Pres. Max. Pilot DIRCIONL CONROLS Solenoid Controlled ilot Operted Directionl Vlves hese vlves re composed of solenoid operted pilot vlves nd pilot operted slve vlve. When solenoid is energised the pilot vlve directs the

More information

Specifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions

Specifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions mall direct mounting cylinder 2 eries ort size: (or,, mm bore) (or mm bore) I symbol ingle acting spring return type ingle acting spring extend type ouble acting VI. pecifications escriptions ore size

More information

CAUTION. All safety information must be followed as provided in this Technical Sheet and in Service Manual RS

CAUTION. All safety information must be followed as provided in this Technical Sheet and in Service Manual RS peed Queen Domestic asher echnical nformation 0 V, 0 Hz Models 70 70 Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or repair of this unit.

More information

LMP series Filter element according to DIN Maximum pressure up to 30 bar - Flow rate up to 2000 l/min

LMP series Filter element according to DIN Maximum pressure up to 30 bar - Flow rate up to 2000 l/min Low & Medium Pressure fi lters LMP 90090 series according to DIN 0 Maximum pressure up to 0 bar Flow rate up to 000 l/min Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be

More information

Suction fi lters. SF series. Flow rate up to 160 l/min. Suction fi lters

Suction fi lters. SF series. Flow rate up to 160 l/min. Suction fi lters Suction fi lters SF 00 series Flow rate up to 60 l/min Suction fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending by the application. For example,

More information

PlowGuard - Plow Balance System. Patent No. 6,467,553 PART NUMBER: SG REV: C DATE: 07/03/14. List of Included Documents

PlowGuard - Plow Balance System. Patent No. 6,467,553 PART NUMBER: SG REV: C DATE: 07/03/14. List of Included Documents PlowGuard - Plow alance System escription List of Included ocuments rawing Numbers Patent No.,7, Initial Setup/djustment Procedure Plow alance Valve ½ load sense Plow alance Valve full load sense ustom

More information

Description Quantity Opening Weight Max Rating 01/4721 Hydraulic Grip supplied with no faces, Single actuator, 15mm Pair Face 15Kg 60kN 315 bar

Description Quantity Opening Weight Max Rating 01/4721 Hydraulic Grip supplied with no faces, Single actuator, 15mm Pair Face 15Kg 60kN 315 bar A Hydraulic grip with single actuator, single actuator grips have one side adjusted by manual tightening action screw and the grips are suitable for offset sample alignment for shear testing Ideal for

More information

High Pressure fi lters. FHB series. Maximum pressure up to 320 bar - Flow rate up to 485 l/min. High Pressure fi lters

High Pressure fi lters. FHB series. Maximum pressure up to 320 bar - Flow rate up to 485 l/min. High Pressure fi lters High Pressure fi lters FHB series Maximum pressure up to 0 bar - Flow rate up to 8 l/min 8 High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop

More information

High Pressure fi lters. FHM series. Maximum pressure up to 320 bar - Flow rate up to 450 l/min. High Pressure fi lters

High Pressure fi lters. FHM series. Maximum pressure up to 320 bar - Flow rate up to 450 l/min. High Pressure fi lters High Pressure fi lters FHM series Maximum pressure up to 0 bar - Flow rate up to 0 l/min 67 High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop

More information

Odor Removal Filter. Model Note) 1 8, , , , 3 4. Model/Free Standing Type AMF800. Model/Piping Support Type AMF Port size

Odor Removal Filter. Model Note) 1 8, , , , 3 4. Model/Free Standing Type AMF800. Model/Piping Support Type AMF Port size dor emoval ilter Series os fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. Can

More information

Metal air breather filter

Metal air breather filter Series S Metal air breather filter 4 H 5 6 7 H H S (Materials) Screw: Galvanised Steel Washer: Teflon Cover: Steel 4 Filter element: Impregnated paper 5 Ring: Galvanised Steel 6 Seal: R 7 Connection: nodised

More information

RA / /3-, 4/2- and 3/2-Way Directional Valves Mechanical/Model WM.6 (Series 5X) Mechanical Manual Operation 1/

RA / /3-, 4/2- and 3/2-Way Directional Valves Mechanical/Model WM.6 (Series 5X) Mechanical Manual Operation 1/ /3-, /- nd 3/-Wy Directionl Vlves Mechnicl/Model WM.6 (Series X) Mechnicl Mnul Oertion Size 6 (D 3).. 6 SI (3 r)... 6. GM (6 L/min) RA 8/6.98 RA 8/6.98 Relces: 6.97 Direct oerted sool tye directionl control

More information

BASCO TYPE 500ES HEAT EXCHANGERS. ...world leaders in heat transfer technology

BASCO TYPE 500ES HEAT EXCHANGERS. ...world leaders in heat transfer technology BASO YPE 500ES HEA EHAERS...world leaders in heat transfer technology Quality, Value, nnovation and Performance For over 60 years, AP Heat ransfer s commitment to these core principles is what sets us

More information

VOLUMEC. Valve Position Indicator 5

VOLUMEC. Valve Position Indicator 5 VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position

More information

Technical Explanation for Axial Fans

Technical Explanation for Axial Fans CSM_Axial_TG_E Introduction What Is an Axial? Axial fans are used for stable cooling in many different applications and locations. If the temperature of a device increases, the lives of its internal parts

More information

Polígono Indutrial O Rebullón s/n Mos - España -

Polígono Indutrial O Rebullón s/n Mos - España - FP 5 Polígono Indutrial O Rebullón s/n. 646 - Mos - spaña - rodavigo@rodavigo.com SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Polígono Indutrial O Rebullón s/n. 646

More information

ERSATZTEILE RAS-8-12FSXN1E

ERSATZTEILE RAS-8-12FSXN1E Voltage 00V/0Hz Replacement Part Q'ty Per Unit 7E1110 7E1111 7E11 No. Part Name raw. No. Order No. Remarks 8FSXN1E 10FSXN1E FSXN1E 1 Side over L 17B A P 1 1 1 2 Side over R 17B A P27 1 1 1 Side over L2

More information

DATE BA BB 2 RELEASE REV * * DRAINAGE SYSTEM INSTL TOILET-MACERATOR MODEL CHT R42HD CHT

DATE BA BB 2 RELEASE REV * * DRAINAGE SYSTEM INSTL TOILET-MACERATOR MODEL CHT R42HD CHT WG -0 TOILET-MERTOR 00-0-HT MOEL RH RELESE ZONE TE ISION REOR WG TE FTR-ORIG -0 00-0-HT RHL 9P 9P S TILGTE PKGE TILGTE PKGE WITHOUT WSHER/RYER STKE OES/STNRS US OES/STS-S,MVSS E WSHER RYER M WSHER/RYER

More information

LO1 SERIES. compact direct solenoid actuated valves

LO1 SERIES. compact direct solenoid actuated valves SRS compact direct solenoid actuated valves 0 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T N T................................................... V V O S T O N........................................

More information

RCP-2 (DET AC) RIGHT COMPONENT SEAL-TRIM,EDGE (60 MM) (2) TAPE-FOAM (250 MM) (2)

RCP-2 (DET AC) RIGHT COMPONENT SEAL-TRIM,EDGE (60 MM) (2) TAPE-FOAM (250 MM) (2) RP- LEFT, RP- (ET ) RIGHT OMPONENT ONTROLLER-POWER -0-000 OX 00-0-000 00-0-000 G-0-U () ONNER 0-0-000 () TUING-VINYL 0-0-000 (0MM) ETIL SEL-TRIM,EGE 0-0-000 (0 MM) () TRNSMITTER-IR 90--000 RP- (ET ) TPE-FOM

More information

1 OF / Nov-2017

1 OF / Nov-2017 X OX ETIL GROMMET-EGE LINER 0-0-000 SEL-TRIM,EGE 0-0-000 (0 MM) () PLTE-WLL, TRIPLE OX HORIZ 9-0-HT LMP 09-0-000 INET SM- OVH,OOR ONNER-F,90 RIGHT NGLE 9-0-000 () MOULE-INTERFE, IR IMPT 90-09-000 WIRE

More information

CROSS FLOW COOLING TOWER

CROSS FLOW COOLING TOWER CROSS FLOW COOLING TOWER LUCKY GREEN THAI INDUSTRIES CO LTD Material Specification Model LGX 80 00 0 00 0 300 30 400 00 600 700 800 000 Motor Totally enclosed Totally enclosed fan cooled Driving System

More information

Polígono Indutrial O Rebullón s/n Mos - España -

Polígono Indutrial O Rebullón s/n Mos - España - FB 8 Polígono Indutrial O Rebullón s/n. 646 - Mos - España - rodavigo@rodavigo.com SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Polígono Indutrial

More information