SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
|
|
- Priscilla Sparks
- 5 years ago
- Views:
Transcription
1 6 FMP
2 SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7
3 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat treatment) ypass valve: rass Reverse Flow: Steel (series 5-0 only) Check valve: Steel Pressure Maximum operating pressure: 80 bar (8 MPa) Test pressure: 40 bar (4 MPa) urst pressure: 840 bar (84 MPa) Pulsed pressure fatigue test,000,000 cycles with pressure from 0 to 80 bar (8 MPa) Filter Element rea Filter element in stainless steel mesh Length Type 4 P065 P5 P Values expressed in cm Pressure drops Δp ousing The curves are plotted using mineral oil with density of 0.86 kg/dm to ISO 968. Δp varies proportional with density. Temperature From -5 C to +0 C Filter ousing FMP 065 ypass valve Opening pressure 6 bar ±0% Other opening pressures on request. Elements type Δp Mircrofibre elements series N-R: 0 bar Elements in stainless steel mesh series N: 0 bar Elements in microfibre series -S: 0 bar Oil flow from exterior to interior. Seals Standard Nitrile (NR) series Optional FPM series V Weights without filter elements (kg) Length 4 FMP FMP FMP Filter internal volumes (dm ) Length 4 FMP FMP FMP Connections In-line Inlet/Outlet Compatibility odies compatible with: Mineral oils to ISO 94 - aqueous emulsions Synthetic fluids, water/glycol. Filter elements compatible with: Mineral oils to ISO 94 - aqueous emulsions Synthetic fluids, water/glycol. Nitrile (NR) seals series, compatible with: Mineral oils to ISO 94 - aqueous emulsions Synthetic fluids, water/glycol. V series FPM seals, compatible with: Synthetic fluids type S-FDR-FDS-FDU. To ISO 94 Check valve /,50 /4,00 0,50 0, Filter ousing FMP 5 Check valve /4,50,00 0,50 0, Filter ousing FMP 0 Check valve /4,50,00 / 0,50 0,
4 Valves ypass valve pressure drops 5 FMP FMP FMP ,50 Pressure drop in reverse flow valves FMP 0,00,50 0, Reverse Flow - In filter direction 9
5 Dimensions FMP Recommended maximum flow rate - Pressure drop of complete filter equal to Δp.5 bar. - Oil kinematic viscosity 0 mm /s (cst). - Density 0.86 kg/dm. - Connections of filter under test G /4. 8 Filter Flow rate Flow rate Filter element l/min l/min Length type Series N Series 00 Ø M M M Side Standard position for bypass valve Threaded Connections G / / NPT G /4 E Depth 5 mm M8 5/6 UNC M8 E fixing holes /4 NPT SE 8 (/4-6 UNF) 5/6 UNC 5/6 UNC SE ( /6 - UN) 5/6 UNC Filter Length mm Side C lternative position for bypass valve Indicator and bypass valve positions can be inverted. 40
6 FMP 5 04 Recommended maximum flow rate - Pressure drop of complete filter equal to Δp.5 bar. - Oil kinematic viscosity 0 mm /s (cst). - Density 0.86 kg/dm. - Connections of filter under test G. 8 Filter Flow rate Flow rate Filter element l/min l/min Length type Series N Series M Ø M M5 - Threaded Connections E Depth 5 mm Side ypass valve standard position G /4 /4 NPT G M0 /8 UNC M0 NPT /8 UNC SE ( /6 - UN) /8 UNC 06 E nr.. fixing holes 40,6 60 SE 6 ( 5/6 - UN) Flanged Connections /4 SE 000 psi/m /8 UNC Depth 5 mm M0 Side C ypass valve alternative position Indicator and bypass valve positions can be inverted. /4 SE 000 psi/unc SE 000 psi/m SE 000 psi/unc /8 UNC M0 /8 UNC Filter Length mm
7 FMP 0 40 Only for FMP 0 length 4 40 Ch. Indicator connection Plug T - Ch. Ø 05 Ø 8 P0 50 mm P0 550 mm Oil drain plug G /8 - Ch Style P0 standard maintenance from head. Style P0 maintenance option from housing base. Side ypass valve standard position Side C ypass valve alternative position Ch. 46 ypass valve E nr. 4 fixing holes Plug T Indicator position Plug T Indicator position Ch. 46 ypass valve 4
8 FMP 0 Recommended maximum flow rate - Pressure drop of complete filter equal to Δp.5 bar. - Oil kinematic viscosity 0 mm /s (cst). - Density 0.86 kg/dm. - Connections of filter under test G /. Filter Flow rate Flow rate Filter element l/min l/min Length type Series N Series M M M M Threaded Connections G /4 /4 NPT G / / NPT SE 0 ( 5/8 UN) SE 4 ( 7/8 UN) Flanged Connections /4 SE 000 psi/m /4 SE 000 psi/unc / SE 000 psi/m / SE 000 psi/unc Filter Length 4 mm E Depth 5 mm M / UNC M / UNC / UNC / UNC E Depth 5 mm M / UNC M / UNC 4
9 Spare parts FMP 4 6 5f 5g 5e 5d 5a 5b 5c 5h 5m Pos. Description Qty. FMP Series FILTER Complete filter See order table Filter element See order table ypass assembly 000 (NR) (NR) (FPM) (FPM) 4 Non bypass assembly 0004 (NR) (NR) (FPM) (FPM) 5 Seal kits NR FPM NR FPM NR FPM a 5b 5c Filter element O-Ring O-Ring for housing nti-extrusion ring OR 400 OR 06 OR 44 Ø 4.99 x.5 Ø 6.65 x.6 Ø 9.69 x.5 OR 59 OR 56 pcs. OR 50 Ø x.5 Ø x.6 Ø x.6 Parbak 7 Parbak 44 pcs. Parbak 5 Ø 54.5 x Ø 6.96 x.8 Ø 89.6 x.8 5d Gasket (NR) (FPM) (NR) (FPM) (NR) (FPM) 5e O-Ring O-R 050 Ø.4 x.78 5f p or Non p O-Ring onded seal G / - FPM O-R 4 (NR 90 Sh ) Ø 6,4 x,6 5g p or Non p O-Ring OR 050 OR 06 Ø.4 x.78 Ø 6,65 x,6 5h Protective seal m Oil drain plug (not all model) - - G /8 with bonded seal 6 Indicator plug T TV T TV T TV - Indicators See order table 44
10 Filter assembly FMP Example: FMP 065 G 0 N P0 Filter element P Ordering information FMP Example: P N P0 - Size 6 - Filter elements 8b 8a Filter length - Valves 4 - Seals 4 (only for FMP 0) S C D V Z T E Without bypass side - Optional With bypass side - Standard With bypass side C - Optional With bypass side + check valve* With Reverse Flow* (Only for size 0) With Reverse Flow + bypass* (Only for size 0) Without bypass + check valve* Without bypass side C - Optional *Reduced cross-section oilways NR 0 Inorganic microfibre µ 06 Inorganic microfibre 6 µ 0 Inorganic microfibre 0 µ 6 Inorganic microfibre 6 µ 5 Inorganic microfibre 5 µ M5 Stainless steel mesh 5 µ (style N only) 7 - Filter elements collapse pressure N R S 8 - Options a) Filter P0 0 bar 0 bar 0 bar (Filter with reverse flow + bypass) 0 bar (Filter with reverse flow) MP Standard filters P0 Maintenance from housing base (only for FMP 0-4) Pxx Customer request b) Filter element P0 MP Filtri standard ßx (c) 000 See page 0 V FPM Pxx 5 - Connections Type Customer request G G / G /4 G /4 G G /4 G G / G / NPT /4 NPT /4 NPT G4 /4 NPT NPT / NPT G5 SE 8 (/4 6 UNF) SE ( - /6 UN) SE 0 ( 5/8 UN) G6 SE ( - /6 UN) SE 6 ( - 5/6 UN) SE 4 ( 7/8 UN) F - /4 SE 000 PSI/M - /4 SE 000 PSI/M F - SE 000 PSI/M - / SE 000 PSI/M F - /4 SE 000 PSI/UNC - /4 SE 000 PSI/UNC F4 - SE 000 PSI/UNC - / SE 000 PSI/UNC DIFFERENTIL INDICTORS (see page 5) MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication is marketing information. MP Filtri reserves the right to make changes to the product described herein at any time it deems fit in relation to technical or commercial requirements. The colors of the products shown on the cover are for illustration purposes only. Copyright. ll rights reserved. 45
Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)
More informationPolígono Indutrial O Rebullón s/n Mos - España -
FP 5 Polígono Indutrial O Rebullón s/n. 646 - Mos - spaña - rodavigo@rodavigo.com SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Polígono Indutrial O Rebullón s/n. 646
More informationWorking pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.
8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel
More informationFMP :41 Pagina 5 (1,1) FMP
FMP 6-07-006 9:4 Pagina 5 (,) FMP 6 FMP 6-07-006 9:4 Pagina 5 (,) SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 FMP 6-07-006 9:4 Pagina 7 (,) Technical data Filter
More informationPolígono Indutrial O Rebullón s/n Mos - España -
FB 8 Polígono Indutrial O Rebullón s/n. 646 - Mos - España - rodavigo@rodavigo.com SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Polígono Indutrial
More informationFlow rates to 475 l/min
FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass
More informationFMM 050 uk :26 Pagina 5 (1,1) FMM 050
uk 6-07-006 9:6 Pagina 5 (,) 30 uk 6-07-006 9:6 Pagina 5 (3,) SRIS Working pressure 80 bar Style S Style Style T Style D 3 uk 6-07-006 9:6 Pagina 7 (,) Technical data Filter body ( M a t e r i a l s )
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationmandata_us :43 Pagina 83 (1,1) FHB 82
8 FHB SERIES FHB Working pressure 4600 psi Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body ( M a t e r i a l s ) Head: Cast iron (chemical heat tre a t
More informationMaximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
More informationLMP 210. Style B. Style S. Maximum pressure 60 bar F l o w r a t e s t o l / m i n
LMP 0 Style S Style Maximum pressure 60 bar F l o w r a t e s t o 7 0 l / m i n 6 Technical data Filter housing (Materials) Head: luminium Housing: nodised luminium ypass valve: Nylon - Steel Pressure
More informationElement description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre
Style FZ Stainless Steel Pressure filter Technical data element Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working pressure:
More informationFlow rates to 590 l/min
LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball
More informationSTAINLESS STEEL FILTER
STINLSS STL FILTR Style FZ Stainless Steel Pressure filter Technical data Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working
More informationMPT Multifunction Multiport
MP Multifunction Multiport Maximum pressure 8 bar F l o w r a t e s t o 0 0 l / m i n echnical data housing (Materials) ead: luminium Cover: Nylon Bowl: Nylon Pressure Working pressure: 8 bar emperature
More informationSERIES INLINE FILTERS LMP 210. Maximum pressure 60 bar Maximum flow to l / mi n
SERIES INLINE FILTERS LMP 0 Maximum pressure 60 bar Maximum flow to 0 0 l / mi n SERIES LMP 0 Working pre s s u re 60 bar Style S Style B B B D.I. D.I. A A Technical data Filter housing ( M a t e r i a
More informationCHINA MP FILTRI P.O. Box Shanghai Phone: Fax:
FMP 038 uk 6-07-006 9:34 Pagina (,) New Headquarters : MP FILTRI S.p.A. Italy Via Maggio, n. 3 0060 Pessano con Bornago (Milano) Italy Tel. +39.0/95703. Fax +39.0/9574497-9574088 email: sales@mpfiltri.com
More informationHigh Pressure fi lters. FMP series. Maximum pressure up to 320 bar - Flow rate up to 475 l/min. High Pressure fi lters
High Pressure fi lters FMP series Maximum pressure up to 0 bar Flow rate up to 7 l/min High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending
More informationSERIES. Maximum pressure 8 bar
SERIES Maximum pressure 8 bar F l o w r a t e s t o 0 0 l / m i n OLD MPF 00 NEW MPF 00 8 75 80 5-6 5,5 5,5 Nr. holes Ø 8,5 55 55 Nr. slots Ø 8,5 Up to: G NPT SAE 6 Up to: G / SAE 0 DIFFERENCE BETWEEN...
More information331 Low & Medium Pressure filters
Low & Medium Pressure fi lters LMP 00-0 & 0- series Maximum pressure up to 60 bar - Flow rate up to 70 l/min Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the
More informationHigh Pressure fi lters
High Pressure fi lters FMM 00 series Maximum pressure up to 0 bar Flow rate up to l/min FHA 0 series Maximum pressure up to 60 bar Flow rate up to 0 l/min 9 High Pressure fi lters FILTER SIZING The correct
More informationHigh Pressure fi lters. FMP 039 series. Maximum pressure up to 110 bar - Flow rate up to 80 l/min. High Pressure fi lters
High Pressure fi lters FMP 09 series Maximum pressure up to 0 bar Flow rate up to 80 l/min 7 High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop
More information379 Low & Medium Pressure filters. LMD 211 series. Maximum pressure up to 60 bar - Flow rate up to 330 l/min. Low & Medium Pressure fi lters
Low & Medium Pressure fi lters LMD series Maximum pressure up to 60 bar Flow rate up to 0 l/min 79 Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the variable
More informationLMP series Filter element according to DIN Maximum pressure up to 30 bar - Flow rate up to 2000 l/min
Low & Medium Pressure fi lters LMP 90090 series according to DIN 0 Maximum pressure up to 0 bar Flow rate up to 000 l/min Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be
More information359 Low & Medium Pressure filters. LMP series. Maximum pressure up to 30 bar - Flow rate up to 2400 l/min. Low & Medium Pressure fi lters
Low & Medium Pressure fi lters LMP 909 series Maximum pressure up to 0 bar Flow rate up to 00 l/min 9 Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the variable
More informationHigh Pressure fi lters. FHB series. Maximum pressure up to 320 bar - Flow rate up to 485 l/min. High Pressure fi lters
High Pressure fi lters FHB series Maximum pressure up to 0 bar - Flow rate up to 8 l/min 8 High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop
More informationHigh Pressure fi lters. FHM series. Maximum pressure up to 320 bar - Flow rate up to 450 l/min. High Pressure fi lters
High Pressure fi lters FHM series Maximum pressure up to 0 bar - Flow rate up to 0 l/min 67 High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop
More informationHigh Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min
High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction
More informationHigh Pressure fi lters. FHA 051 series. Maximum working pressure up to 56 MPa (560 bar) - Flow rate up to 140 l/min. High Pressure fi lters
High Pressure fi lters FHA 0 series Maximum working pressure up to 6 MPa (60 bar) Flow rate up to 0 l/min 99 High Pressure fi lters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE FACTOR Page Introduction
More information387 Low & Medium Pressure filters
Low & Medium Pressure fi lters LMD 000 & series Maximum pressure up to 6 bar Flow rate up to 90 l/min 87 Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the variable
More informationMaximum pressure 80 bar
Maximum pressure 80 bar F l o w r a t e s t o 0 0 l / m i n LMP 0 Maximum pressure 80 bar F l o w r a t e s t o 6 0 l / m i n Technical data LMP 0 Filter housing (Materials) Head: luminium Housing: ataphoresis
More informationMPF SERIES RETURN FILTER
MPF SERIES The series of filters MPF has specifically been designed for use on mobile applications, agricultural machinery and power units. The MPF filter range is suitable for flow rates up to 750 l/min.
More informationAIR BREATHER FILTERS. Temperature from -25 to +100 C
IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
More informationReturn fi lters. FRI series. Maximum pressure up to 20 bar - Flow rate up to 1500 l/min. Return fi lters
Return fi lters FRI series Maximum pressure up to 0 bar - Flow rate up to 500 l/min 9 Return fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending by
More informationSuction fi lters. SF series. Flow rate up to 160 l/min. Suction fi lters
Suction fi lters SF 00 series Flow rate up to 60 l/min Suction fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending by the application. For example,
More informationMetal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)
Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:
More informationSpin-on fi lters. MPS series. Maximum pressure up to 12 bar - Flow rate up to 365 l/min. Spin-on fi lters
Spin-on fi lters MPS series Maximum pressure up to bar - Flow rate up to 65 l/min 6 Spin-on fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending by
More informationReturn fi lters. MPI series. Maximum working pressure up to 1 MPa (10 bar) - Flow rate up to 3000 l/min
Return fi lters series Maximum working pressure up to MPa (0 bar) Flow rate up to 000 l/min 0 Return fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction Calculation
More informationVISUAL LEVEL INDICATORS
VIUL LEVEL INDICTOR LV... The level indicators series is available for both static and mobile applications; the construction materials used make it possible to guarantee service with wide temperature variations
More informationAIR BREATHER FILTERS. Temperature from -25 C to +100 C
IR RETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
More informationSuction fi lters. MPA - MPM series. Flow rate up to 875 l/min. Suction fi lters
Suction fi lters & MPA MPM series Flow rate up to 87 l/min 7 Suction fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending by the application. For example,
More informationNylon oil filler and air breather filler caps
Series TP 0 Dimensions 6 Bayonet G / TP0 (Materials) - Cover/ringnut: Nylon - Filter element: Impregnated paper Polyurethane - Pressurisation valve: Nylon Galvanised Steel - Seal: Reservoir holes - Flange:
More informationPRESSURE GAUGE SELECTORS
PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed
More informationMRH. Return Filters RETURN FILTER
MRH Return ilters RETUR ILTER Return ilters MRH MRH MPa (0 bar) Port sizes: / / low rates:.00 l/min TECHICAL ATA Max. working pressure: MPa (0 bar) Max. test pressure: MPa ( bar) ursting pressure: 6 MPa
More informationMetal air breather filter
Series S Metal air breather filter 4 H 5 6 7 H H S (Materials) Screw: Galvanised Steel Washer: Teflon Cover: Steel 4 Filter element: Impregnated paper 5 Ring: Galvanised Steel 6 Seal: R 7 Connection: nodised
More informationDifferential indicators
Differential indicators 5-07-006 7:8 Pagina 5 (,) Differential indicators A guarantee of maintenance to the correct ISO 06 contamination class achieved through the use of the filters can be provided exclusively
More informationCartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
More informationRFM. 300 kpa (3 bar) Return Filters RFM. Ports: 3/8 2 1/2 Flow rates: l/min
Return Filters RFM RFM kpa (3 bar) Ports: 3/ 2 1/2 Flow rates: 0 l/min ECHNICAL DAA Max. working pressure: kpa (3 bar) Max. test pressure: 00 kpa ( bar) Bursting pressure: 1 MPa (10 bar) Fatigue test:
More informationE 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.
More informationLCC***N**S. A/F (mm) Size G 1/2 G 3/4 G 1 G 1 1/4 G 1 1/2 G 2 G60. Ø hole for Expansion kit. Size. Diamètre G20 G26 G33 G42 G48.
eries L***N imensions L***N** L***N**K Ø E /F G F L***N***** (Materials) ody: Nylon Lens: Polyamide 3 ontrast screen: Nylon eals: NR Inorganic fibre 5 Expansion kit: rass NR L/N 5 3 5 L***N Example: L
More informationCooler-Bypass Thermostat Valve, Size 10
Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,
More informationDirect-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationHD 049 HD 069 HD 172 HD 319 HD 419 HD 619. Operating pressure up to 8700 psi Nominal flow rate up to gpm us
H i g h P re s s u re i l t e r K i t s H 049 H 069 H 172 H 319 H 419 H 619 Operating pressure up to 8700 psi Nominal flow rate up to 118.9 gpm 40.95-3us e s c r i p t i o n pplication In the high pressure
More informationIBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationIBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationOdor Removal Filter Series AMF
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
More information5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationDirect-operated 2/2-way compact solenoid valves Type EV210A
Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together
More information50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m
F Standardised EN 733 centrifugal pumps Hz n= 9 rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to (3 ) Head up to 9 m PPLICTION LIMITS Manometric suction lift up to 7 m Liquid temperature
More informationGlobe Valve, Metal. Sectional drawing. *see information on working medium on page 2
Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing low
More informationSolenoid valves 2/2-way direct-operated type EV210A
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.
More informationFlow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min
RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division
More informationCartridge Valves Technical Information
Quick reference CONTENTS CPF20... 8.2 CP600-5... 8. CP602-5... 8.4 20662 handle kit... 8.5 MP06... 8.6 MP2... 8.6 BC06... 8.9 BC0... 8.0 BC... 8. CP0-... 8. CP904-... 8.4 SC0... 8.5 SC... 8.6 DIN connectors...
More informationEVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES
TECNICAL DATA EVOTRON Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
More informationSERIES. Accessories. s.p.a
New Headquarters : MP FILTRI S.p.. Italy Via Maggio, n. 000 Pessano con ornago (Milano) Italy Tel. +9.0/9570. Fax +9.0/957979570 email: sales@mpfiltri.com http://www.mpfiltri.com GRET RITIN MP FILTRI U.K.
More informationAME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg)
Super Mist Separator Series AME Series AME separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oilless equivalent air. It should be
More informationHIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS A WORLDWIDE LEADER IN THE FIELD OF HYDRAULIC FILTRATION EQUIPMENT. Our company started life in 96, when Bruno Pasotto decided to attempt to cater for the requests of a market still
More informationK 080/12 F 10 K 3-2X/.. Features
RE 2 1/11.02 Replaces: 0.2 Fine throttle Type F Nominal sizes and Series 2X and 3X Maximum operating pressure 2 bar Maximum flow 0 L/min K 00/12 F K 3-2X/.. K 0/ F P 3-3X/.. Overview of contents Contents
More informationhard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version
YR Pneumatic actuators for process automation Pneumatic connections configuration: NMUR interface V/VE Top pinion: V/VE Holes for sensor box connection: V/VE ottom holes for connecting valves: SO Single
More informationPilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting
21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item
More informationAttachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface
ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the
More informationFluid Cooling Industrial PF Series
Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure
More information4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE)
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) RE 9035/. Replaces: 05. 1/1 Type 4WRPEH 6 Size 6 Unit series X Maximum
More informationVOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
More information98 Series Backpressure Regulators and Relief Valves
9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationA wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
More informationED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationAir Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7
ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan
More informationPR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
More informationVortex Flow Meters. RVL Series Vortex Flow Meter
TM Vortex Meters RVL Series Vortex Meter pplications: Water/Wastewater I Water: Semiconductor, Institutional I Water Skids Semiconductor Equipment Slurry hemical Processing RINE FEERTE IN. ISO 900 : 000
More informationRotary Joints. Series DP
Rotary Joints Series DP Rotary Joints Series DP DP rotary joints are suitable for: hot and cold water modified design -00 for thermal oil Small Series also for hydraulic oil and compressed air high speeds
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationP303 Pressure Regulator
P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationDOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ.
LOREM IPSUM JE ZULT MAAR HZ m Head m/s m/s m/s m/s m/s Ø m Ø Ø Ø Ø l/s Flow kw Shaft power P Ø m/h Ø 9 Ø Ø kw 9 Total input power P Ø DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, xv AP-, AKP- and AEP-
More informationType M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
More informationTHE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.
P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE
More informationTPH Series 50Hz Multi-stage Centrifugal Pump
WLRUS PUMP T Series Hz Multistage Centrifugal Pump ll specifications are subject to change without notice. 9 T Product data pplications Page Standard mode Page Operation conditions Page Pump construction
More information4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design)
4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) Type 4WRL10...25 Sizes (N) 10, 16, 25 Unit series 3 Maximum working pressure P,, 350
More informationExternal gear pump Type G3, Series 3X
NS to 5 External gear pump Type G3, Series 3X Up to 2 bar Up to 5.2 cm 3 RE 039/07.00 Replaces: 03.00 Plain bearings for high loads Mono-block bearing New principle of hydrostatic gap compensation Drive
More informationDOG-1/-3. Oscillation Flowmeter. for gases. Measuring ranges: m 3 /h air : 120 C. p max. : PN 40; t max
Oscillation Flowmeter for gases measuring monitoring analysing DOG1/3 Measuring ranges: 0.2 20... 200 20000 m 3 /h air p max : PN 40; t max : 120 C Connection: flange DN 25... DN 400 Material: cast iron,
More informationDM70 Hand-Held Dewpoint Meter for Spot-Checking Applications
DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications The Vaisala DRYCAP Hand-Held Dewpoint Meter DM70 offers accurate and fast measurement for industrial dewpoint applications, such as compressed
More informationIndicate Positive, Negative or Differential, Accurate within 1%
SERIES 2000 MAGNEHELIC DIFFERENTIAL GAGES Indicate Positive, Negative or Differential, Accurate within 1% RUBBER RELIEF PLUG WILL UNSEAT ITSELF WHEN GAGE IS OVERPRESSURIZED.025 [.64] SPACE CREATED BY 3
More information