UNISONIC TECHNOLOGIES CO., LTD

Transcription

1 UNISONIC TECHNOLOGIES CO., LTD BILATERAL SWITCH DESCRIPTION The UTC U74HC1G66 is a high-speed Si-gate CMOS device that provides an analog switch. The switch has two input/output pins(y and Z) and an active high enable input pin (E). When pin E is low, the analog switch is turned off. FEATURES * Operation voltage range: 2V~9V * Very low ON-resistance * Low power dissipation * Very small 5 pins package ORDERING INFORMATION Order Number Lead Free Halogen Free Package Packing U74HC1G66L-AF5-R U74HC1G66G-AF5-R SOT-25 Tape Reel U74HC1G66L-AL5-R U74HC1G66G-AL5-R SOT-353 Tape Reel MARKING 1 of 6 Copyright 2011 Unisonic Technologies Co., Ltd

2 PIN CONFIGURATION V CC 5 E Y Z GND FUNCTION TABLE INPUT(EN) OUTPUT(Y/Z) H ON L OFF Note: H: HIGH voltage level; L: LOW voltage level. LOGIC DIAGRAM UNISONIC TECHNOLOGIES CO., LTD 2 of 6

3 ABSOLUTE MAXIMUM RATINGS (unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage V CC -0.5~11 V V CC or GND Current I CC ±50 ma Input Clamp Current I IK ±20 ma Switch Diode Current I SK ±20 ma Switch Current I S ±25 ma Power Dissipation 200 mw P D Derate above T A >55 C 2.5 mw/k Operating Temperature T OPR -40 ~ C Storage Temperature T STG -65 ~ +150 C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Supply Voltage V CC V Input Voltage V IN GND V CC V Switch voltage V S GND V CC V V CC =2.0V 1000 ns Input Transition Rise or Fall Rate t R, t F V CC =4.5V ns V CC =6.0V 400 ns V CC =10.0V 250 ns STATIC CHARACTERISTICS (T A =25 С) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT V CC =2V 1.5 V High-Level Input Voltage V IH V CC =4.5V 3.15 V V CC =6V 4.2 V V CC =9V 6.3 V V CC =2V 0.5 V Low-Level Input Voltage V IL V CC =4.5V 1.35 V V CC =6V 1.8 V V CC =9V 2.7 V Input Leakage Current I I(LEAK) V CC =6V, V IN =V CC or GND μa V CC =10V, V IN =V CC or GND μa Quiescent Supply Current I Q V CC =6V, V IN =V CC or GND, V IS =GND or V CC, V OS =V CC or GND 1 10 μa V CC =10V, V IN =V CC or GND, V IS =GND or V CC, V OS =V CC or GND 2 20 μa Analog Switch OFF-state V CC =10V, ; V S =V CC -GND μa I S Current ON-state V CC =10V, ; V S =V CC -GND μa V CC =2.0V, I S =100μA, V IS =V CC to GND; ; Ω ON-Resistance PEAK R ON(PEAK) V CC =4.5V, I S =1mA, ; V IS =V CC to GND Ω V CC =6.0V, I S =1mA, ; V IS =V CC to GND Ω V CC =9.0V, I S =1mA, ; V IS =V CC to GND Ω UNISONIC TECHNOLOGIES CO., LTD 3 of 6

4 STATIC CHARACTERISTICS(Cont.) (T A =25 С) PARAMETER SYMBOL TEST CONDITIONS MIN ON-Resistance RAIL R ON(RAIL) V CC =2.0V, I S =100μA, V IS =GND; V CC =4.5V, I S =1mA, V IS =GND; V CC =6.0V, I S =1mA, V IS =GND; V CC =9.0V, I S =1mA, V IS =GND; V CC =2.0V, I S =100μA, V IS =V CC ; V CC =4.5V, I S =1mA, V IS =V CC ; V CC =6.0V, I S =1mA, V IS =V CC ; V CC =9.0V, I S =1mA, V IS =V CC ; TYP (Note) MAX UNIT 75 Ω Ω Ω Ω 75 Ω Ω Ω Ω DYNAMIC CHARACTERISTICS (T A =25 С, C L =50pF, GND=0, t R =t F =6ns, unless otherwise specified ) PARAMETER SYMBOL TEST CONDITIONS MIN Propagation Delay V IS to V OS Turn-ON Time E to V OS Turn-OFF Time E to V OS t PHL /t PLH t PZH /t PZL t PHZ /t PLZ Note: All typical values are measured at T a =25 С TYP (Note) MAX UNIT V CC =2.0V, R L = 8 75 ns V CC =4.5V, R L = 3 15 ns V CC =6.0V, R L = 2 13 ns V CC =9.0V, R L = 1 10 ns V CC =2.0V, R L =1KΩ ns V CC =4.5V, R L =1KΩ ns V CC =6.0V, R L =1KΩ ns V CC =9.0V, R L =1KΩ 9 16 ns V CC =2.0V, R L =1KΩ ns V CC =4.5V, R L =1KΩ ns V CC =6.0V, R L =1KΩ ns V CC =9.0V, R L =1KΩ ns UNISONIC TECHNOLOGIES CO., LTD 4 of 6

5 TEST CIRCUIT AND WAVEFORMS Test circuit for measuring ON-resistance (Ron) Test circuit for measuring OFF-state current Test circuit for measuring ON-state current UNISONIC TECHNOLOGIES CO., LTD 5 of 6

6 TEST CIRCUIT AND WAVEFORMS(Cont.) Waveforms showing the Input (V IS ) to Output (V OS ) propagation delays Waveforms showing the turn-on and turn-off times. E Input 10% t F t R 90% t PLZ Vos Output 10% t PZL t PHZ Vos Output 90% t PZH Outputs enabled Note: V IN =GND to V CC Outputs disabled Outputs enabled UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD 6 of 6