NGRM-ENC MANUAL ENCLOSED NEUTRAL-GROUNDING-RESISTOR MONITOR
|
|
- Virginia Hood
- 5 years ago
- Views:
Transcription
1 TIP DIAGOSTI AIATED EAY K POWE A TIP ( S 0 KΩ 00 KΩ) V x V x Kinnear Place Saskatoon, SK anada SP 0A Ph: (0) -0 Fx: (0) - GM-E MAUA EOSED EUTA-GOUDIG-ESISTO MOITO evision 0--0 GM-E GM-E OTO POWE A A ITTEFUSE STATO GOUD FAUT EAKAGE UET EUTA-GOUDIG-ESISTO SE-0 MOITO EAKAGE UET GOUD FAUT ESISTO FAUT ESISTO FAUT MEM GF TIP EVE (% T ATIG) V TIP EVE ESET OFF O GF TIP TIME (s) PUSE PEIOD (s) OFF O PUSE EAE ESET PUSE EAE US opyright 0 by ittelfuse Startco All rights reserved. Document umber: PM-0-E Printed in anada.
2 GM-E Enclosed eutral-grounding-esistor Monitor Page i ev This page intentionally left blank.
3 GM-E Enclosed eutral-grounding-esistor Monitor Page ii ev SETIO TAE OF OTETS PAGE General.... SE- Models.... SE-0 Models... Operation.... Indication, Metering, and eset.... onfiguration and Settings... Installation.... Type X Enclosure.... onnections to the eutral-grounding-esistor and urrent Transformer..... SE- Models..... SE-0 Models.... Supply Voltage onnection..... Supply by Field onnection..... ontrol Power Transformer (PT) Models.... Phase-Voltage Indication.... elay-output onnections.... etwork-ommunications onnections.... Dielectric-Strength Testing... Technical Specifications... Ordering Information... Warranty... Appendix A GM-E evision History... DISAIME Specifications are subject to change without notice. ittelfuse Startco is not liable for contingent or consequential damages, or for expenses sustained as a result of incorrect application, incorrect adjustment, or a malfunction. FIGUE IST OF FIGUES PAGE GM-E Outline and Mounting Details... SE- Typical Wiring Diagram... SE-0 Typical Wiring Diagram... SE- Model (GM-E-00-0) Interior/Exterior Details... SE- Model (GM-E-00-0) Interior Details... SE- Model (GM-E-XX0-XX) Wiring abel... SE-0 Surface-Mount Model (GM-E-XX0-) Interior/Exterior Details... 9 SE-0 Surface-Mount Model (GM-E-XX0-X) Interior Details SE-0 Surface-Mount Model (GM-E-XX0-XX) Wiring abel... 0 SE-0 Panel-Mount Model (GM-E-XX-) Interior/Exterior Details.. SE-0 Panel-Mount Model (GM-E-XX-X) Interior Details... SE-0 Panel-Mount Model (GM-E-XX-XX) Wiring abel...
4 GM-E Enclosed eutral-grounding-esistor Monitor Page iii ev This page intentionally left blank.
5 GM-E Enclosed eutral-grounding-esistor Monitor Page ev GEEA The GM-E Enclosed eutral-grounding- esistor (G) Monitor series is a Type X enclosure housing a ittelfuse Startco SE- or SE-0 eutral- Grounding-esistor Monitor and optional accessories that include a 0/00-V control power transformer (PT), faulted-phase indication (FPI; implemented with an E00 Ground-Fault & Phase-Voltage Indicator), earthleakage panel meter, pulse-enable control, and mounting options. Appropriate fusing is included and field wiring is to terminal blocks. This manual supplements the relevant G-monitor and E00 manuals.. SE- MODES GM-E models with an SE- G Monitor include a surface-mounted G monitor, panel-mounted indication and reset and have a Type X rating. Options include a PT and FPI. See Figs. and.. SE-0 MODES GM-E models with an SE-0 G Monitor include a panel- or surface-mounted G monitor which can be optionally equipped with a network-communications interface. Panel-mounted models include an SE-IPV-G Hinged Transparent over and have an IP rating. Surface-mounted models include panelmounted indication and reset, US connector, and have a Type X rating. oth mounting styles can optionally be equipped with a PT, FPI, earth-leakage panel meter, and pulse-enable switch. See Figs. and 0.. IDIATIO, METEIG, AD ESET Surface-mount models include red panel-mounted Ground Fault and esistor Fault ED s that indicate the G-monitor trip state, and a green ontrol Power ED. eset latched trips by pressing the eset button when the trip condition is no longer present. G-monitor frontpanel indication and reset is accessible when the door panel is open. Panel-mounted SE-0 face-plate indication is visible through the hinged transparent cover. Open the hinged transparent cover to access the SE-0 eset button. Models equipped with earth-leakage metering continuously display earth-leakage current as a percentage of the ground-fault-t-primary rating when the SE-0 is energized. All SE-0 models have a US interface through which G-resistance-change, neutral-voltage and current metering is accessible with a P running SE-MO0 software that is available at ittelfuse.com. This data is also accessible through the optional networkcommunications interface.. OFIGUATIO AD SETTIGS Factory configuration is per the SE- or SE-0 manual, except that SE-0 models equipped with a pulseenable switch have configuration switch S set to K=Pulse. Adjust settings as required refer to the appropriate manuals.. OPEATIO efer to the SE-, SE-0, and E00 manuals included with the GM-E or at relayscontrols, as required. OTE: For models equipped with an SE-0 G Monitor and an optional pulse-enable switch, select Pulse Enable to cause the SE-0 K contact to cycle at a rate determined by the SE-0 front-panel Pulse Period switch. Ensure that SE-0 configuration switch S is set to K=Pulse. AUTIO: For models equipped with a PT and/or FPI, the maximum supply voltage is 00 Vac.
6 GM-E Enclosed eutral-grounding-esistor Monitor Page ev ISTAATIO. TYPE X EOSUE The x 0 x mm polyester enclosure has a hinged front panel with dual lockable latches. For wall mounting, attach the included mounting brackets to the back of the enclosure with the enclosed fasteners, and prepare the mounting surface using the dimensions as shown in Fig.. All models ship with no predrilled cable entry. An appropriate hole or holes must be made in the enclosure for the installation of all conductors. Space is allowed at the bottom for cable entry. See Figs.,, and 0. Use appropriate cable-entry fittings.. OETIOS TO THE EUTA-GOUDIG- ESISTO AD UET TASFOME For all models, connect GM-E terminal to an E-series sensing resistor () terminal. Follow SE- or SE-0 manual guidelines for wire size selection. See Figs. and. All models connect to a current transformer (), which measures G current. The sensing resistor and T are typically located in the G enclosure... SE- MODES onnect the T00 current transformer () secondary to GM-E terminals T and T. onnections are not polarity sensitive. Follow SE- manual guidelines for wire size selection. See Fig.... SE-0 MODES For sensitive EFT- or SE-S0-series current sensors (), connect to GM-E terminals S and. For -A-secondary T s connect to terminals and. A field-wiring change is required for -A-secondary T connections. See Fig.. T connections are not polarity sensitive. Follow SE-0 manual guidelines for wire size selection.. SUPPY VOTAGE OETIO Appropriate supply-voltage fusing is provided for all models. onnect terminal to system ground... SUPPY Y FIED OETIO For models requiring field-supply-voltage connections, connect line and neutral to GM-E terminals and. See Figs. and. SE- and SE-0 models require a 0-Vac supply. onsult the appropriate product manual for power requirements... OTO POWE TASFOME (PT) MODES Models equipped with a PT are compatible with 0- and 00-V systems, and are factory-connected for a 00-V system. Field adjustment for a 0-V system is required by moving the TH connection on T to the H terminal of T. onnect GM-E terminals ØA and Ø to the 0- or 00-V bus using to AWG (.0 to. mm ) wire. See Figs. and.. -VOTAGE IDIATIO For models equipped with phase-voltage and faultedphase indication, connect GM-E terminals ØA, Ø, and Ø to the 0- or 00-V bus using to AWG (.0 to. mm ). See Figs. and. These terminals are shared by the PT connections for models so equipped.. EAY-OUTPUT OETIOS For external alarm or trip indication and protection, connect to SE- A- relay output or SE-0 K relay output by connecting to GM-E terminals and. A field-wiring change is required if a supply-voltage connection is required to the relay output(s) within the GM-E. Field wiring is required if connection to SE-0 relay outputs K, K, and K is required. See Figs. and and the appropriate product manual. OTE: The SE-0 surface-mount options use relays K and K for panel-mounted ground-fault and resistor-fault indication respectively.. ETWOK-OMMUIATIOS OETIOS For SE-0 models equipped with a communications option, connect directly to the SE-0 network interface, referring to the appropriate product manual.. DIEETI-STEGTH TESTIG emove the connections at the SE- and SE-0 and terminals, and remove the connection to the E00 terminal 9 (if installed), before performing dielectric-strength testing. Ensure that all connections are reconnected and securely fastened after any tests. See Figs. and. OTES: () ot included with the GM-E.
7 GOUD FAUT TIP MEM DIAGOSTI AIATED EAY K POWE A ESET ESISTO FAUT TIP ( S 0 KΩ 00 KΩ) V x V x GM-E Enclosed eutral-grounding-esistor Monitor Page ev GM-E A ITTEFUSE STATO EUTA-GOUDIG-ESISTO SE-0 MOITO EAKAGE UET (.) GF TIP EVE (% T ATIG) GF TIP TIME (s) V TIP EVE PUSE PEIOD (s) OFF O PUSE EAE.0 (0.0) SIDE 0. (.00) FOT OTES:. DIMESIOS I MIIMETES (IHES).. PAE-MOUTED SE-0 MODE SHOW.. (.9) 0. (.00) FIGUE. GM-E Outline and Mounting Details. EA (MOUTIG DETAI)
8 GM-E Enclosed eutral-grounding-esistor Monitor Page ev OPTIOA IOMIG 0V Y USTOME OPTIOA IOMIG 0V/ Y USTOME ØA Ø Ø *F 0. A *F 0. A *F 0. A H TH TH 0V H TH H 9 *T 00/0 0/0 0 VA AH H H G *E00 D D DA D DS * G DS * G DS * A G X TX 0V X 0V X X TX 0. A X X T T K T T G T OTO POWE SHD T T A K SE- FATOY SETTIGS GF TIP TIME: 0. SE GF TIP EVE: 0. A MODE: UV ESISTO: 0K ESISTO TIP EVE: 0 ADJUST AS EQUIED. SW GI SE- + I G OTES:. EAY OTATS SHOW WITH SE- DE-EEGIZED. P ESET T ESISTO FAUT X X ED T GOUD FAUT X X. DESIGATOS WITH EADIG * AE OPTIOA. ED FIGUE. SE- Typical Wiring Diagram.
9 GM-E Enclosed eutral-grounding-esistor Monitor Page ev OPTIOA IOMIG 0V Y USTOME OPTIOA IOMIG 0V/ Y USTOME ØA Ø Ø *F 0. A *F 0. A *F 0. A TH H TH TH 0V H H 9 AH H H G D 0 D DA D DS * G * G DS * A DS G X 0V 0V *T 00/0 0/0 0 VA X *E00 TX X X TX S SHD ED K 0. A S ED K 9 0 S G T OTO POWE X X G OTE SE-0 FATOY SETTIGS GF TIP TIME: 0. SE GF TIP EVE: 0% V TIP EVE: 0 V ADJUST AS EQUIED. K MODE: O-FAI-SAFE K MODE: O-FAI-SAFE 9 / K K GF K F T GOUD FAUT 0 X X ED T ESISTO FAUT 0 X X ED OTE OTE K P OTE ESET 0 EMOTE ESET 0 PUSE EAE 0 (OPTIOA) +V + - ESET 0V PUSE EAE DS + - ID OTES: EATH-EAKAGE UET (OPTIOA) SPG SPGA SE-0. SUFAE-MOUT MODES OY.. EAY OTATS SHOW WITH SE-0 DE-EEGIZED.. DESIGATOS WITH EADIG * AE OPTIOA. FIGUE. SE-0 Typical Wiring Diagram.
10 FUSE F, F, F A, 00 VA ITTEFUSE KK.00 0 OK SE- OK TX F TH T *T OTO F POWE TX 0 VA TH *OTE F X X TH G T GOUD OK FAUT X X 0 SE-(GI) ED T ESISTO FAUT X X 0 SE-(I) ED *DS 0 0 P *DS 0 9 ESET 0 0 SE-(+) 0 SE-(SW) 0 *E00 *F DOO WIIG *F (EA VIEW) *F OK 9 T(X) SE-() OPTIOA IOMIG *TX SE-() T(X) 0 VA Y USTOME *TX - 0. A ØA *F - 0. A *TH *E00() OPTIOA IOMIG Ø *F - 0. A *TH *E00() 0 / 00 V Y USTOME Ø *F - 0. A *E00() G OK SE- SE-(A) TIP SE-() T SE-(T) G K OTES: T SE-(T) EOSUE SHD TM. T IS SET FO IOMIG. FO 0V IOMIG, MOVE F-TO-T OETIO SE-() FOM TH TO TH.. DESIGATOS WITH EADIG * AE OPTIOA.. MIIMUM SUPPY ODUTO ATIG 90º..DASHED IES IDIATE FIED WIIG. G A GM-E Enclosed eutral-grounding-esistor Monitor Page ev TM 0 *E00() K T T A 0 W 0 GI I T T G OK ATIG 0. A, 00 VA ITTEFUSE KD.00TXP SHD *DS *DS *E00() *E00() *E00(0) P SE-(T) SE-(G) *E00(9) *TX SE-() OK T T A GOUD ESET ESISTO FAUT FAUT GF MODE ES GF TIP.0 A SH ES TIP TIME (s).0 A EVE (VA) 0. A UV 0K POWE SE- G MOITO SW GI I G 9 0 SH D D DG DA D D DISPAY FAUT E00 SEIES GOUD-FAUT & -VOTAGE IDIATO 0/00 0/0 AH H H A 9 () 0. A ØA(F) 0. A Ø(F) 0. A Ø(F) 0. A T 0 VA T T SHD ITEIO GM-E OTO POWE A GOUD FAUT ESISTO FAUT ESET SIDE OTE:. SHOW WITH A OPTIOS AVAIAE. FOT FIGUE. SE- Model (GM-E-00-0) Interior/Exterior Details.
11 GM-E Enclosed eutral-grounding-esistor Monitor Page ev T T A GOUD FAUT GF TIP TIME (s) SW ESET ESISTO FAUT GF MODE ES.0 A SH ES TIP.0 A EVE (VA) 0. A UV 0K POWE GI SE- G MOITO I G 9 0 D D DG DA D D G SH DISPAY FAUT A E00 SEIES GOUD-FAUT & -VOTAGE IDIATO 0/00 0/0 AH H H A 9 () 0. A ØA(F) 0. A Ø(F) 0. A Ø(F) 0. A T 0 VA T T SHD FIGUE. SE- Model (GM-E-00-0) Interior Details.
12 GM-E Enclosed eutral-grounding-esistor Monitor Page ev TM FUSE F, F, F ATIG 0. A, 00 VA ITTEFUSE KD.00TXP 0. A, 00 VA ITTEFUSE KK.00 OK SHD K T T A SE- 0 SE-(+) *E00() *DS 0 0 *E00() X X *DS 0 *E00(0) T OTO POWE G T GOUD FAUT 0 ED T ESISTO FAUT X X ED P ESET X X DOO WIIG (EA VIEW) *E00() SE-(GI) SE-(I) SE-(SW) OPTIOA IOMIG 0 VA Y USTOME OTES:. T IS SET FO IOMIG. FO 0V IOMIG, MOVE F-TO-T OETIO FOM TH TO TH.. DESIGATOS WITH EADIG * AE OPTIOA.. MIIMUM SUPPY ODUTO ATIG 90º..DASHED IES IDIATE FIED WIIG. OK TX TX OK *DS 0 *DS OK *TX *TX OPTIOA IOMIG 0 / 00 V Y USTOME SE- TIP G EOSUE SE-(G) *E00(9) SE-(T) 0 W GI *T 0 VA *TX SE-() *E A ØA *F - 0. A Ø *F - 0. A Ø *F - 0. A G T K T SHD + I T P T OK G TH F TH F *OTE TH F *F *F *F OK T(X) SE-() SE-() T(X) *TH *E00() *TH *E00() *E00() OK SE-(A) SE-() SE-(T) SE-(T) TM SE-() FIGUE. SE- Model (GM-E-XX0-XX) Wiring abel.
13 FUSE F, F, F T 0 *E00() OTO POWE X X G T GOUD FAUT X X 0 SE-0() ED T ESISTO *DS FAUT 09 SE-0(0) Idc SE-0() X X 0 SE-0() ED *S P PUSE ESET SE-0() SE-0() SE-0() DOO WIIG (EA VIEW) 0. A, 00 VA ITTEFUSE KK.00 P *S *DS(+) *DS(-) OK T TX TX SE-0 *T 0 VA OK *DS 0 0 *DS 0 OK *E00 *F *F *F OK 9 T(X) SE-0(9) SE-0() SE-0() OPTIOA IOMIG *TX SE-0() T(X) 0 VA Y USTOME *TX - 0. A ØA *F - 0. A *TH *E00() OPTIOA IOMIG Ø *F - 0. A *TH *E00() 0 / 00 V Y USTOME Ø *F - 0. A *E00() OTES:. T IS SET FO IOMIG. FO 0V IOMIG, MOVE F-TO-T OETIO FOM TH TO TH.. DESIGATOS WITH EADIG * AE OPTIOA.. MIIMUM SUPPY ODUTO ATIG 90º..DASHED IES IDIATE FIED WIIG. T 0 T 0 9 SE-0 TIP G EOSUE OK 9 ED 0 K SHD G OK F TH F TH *OTE F TH G ED S K SHD TM OK SE-0() SE-0() SE-0(0) SE-0() SE-0() TM SE-0() EUTA-GOUDIG-ESISTO SE-0 MOITO GOUD FAUT TIP EAY K 0 0 POWE MEM V TIP EVE ( S 0 KΩ 00 KΩ) V x V x.0 A GF TIP TIME (s) DIAGOSTI AIATED ESET ESISTO FAUT TIP PUSE PEIOD (s) G A GM-E Enclosed eutral-grounding-esistor Monitor Page 9 ev *E00() *E00() *E00(0) 0 *DS 0 *DS 0 ATIG 0. A, 00 VA ITTEFUSE KD.00TXP *E00(9) *TX SE-0() SE-0() SE-0() ITTEFUSE STATO GF TIP EVE (% T ATIG) () 0. A ØA(F) 0. A Ø(F) 0. A 9 0 SH D D DG DA D D DISPAY FAUT E00 SEIES GOUD-FAUT & -VOTAGE IDIATO 0/00 0/0 AH H H A 9 Ø(F) 0. A T 0 VA S SHD ITEIO GM-E OTO POWE A GOUD FAUT EAKAGE UET ESISTO FAUT ESET OFF O PUSE EAE US SIDE FOT OTE:. SHOW WITH A OPTIOS AVAIAE. FIGUE. SE-0 Surface-Mount Model (GM-E-XX0-) Interior/Exterior Details.
14 GM-E Enclosed eutral-grounding-esistor Monitor Page 0 ev ITTEFUSE STATO EUTA-GOUDIG-ESISTO MOITO GOUD FAUT TIP MEM GF TIP EVE (% T ATIG) GF TIP TIME (s) DIAGOSTI AIATED EAY K POWE A ESET T 0 VA ESISTO FAUT TIP SE V TIP EVE ( S 0 KΩ 00 KΩ) V x V x PUSE PEIOD (s) () 0. A ØA(F) 0. A Ø(F) 0. A Ø(F) 0. A S SHD 9 0 D D DG DA D D DISPAY FAUT A SH G E00 SEIES GOUD-FAUT & -VOTAGE IDIATO 0/00 0/0 AH H H A 9 FIGUE. SE-0 Surface-Mount Model (GM-E-XX0-X) Interior Details.
15 GM-E Enclosed eutral-grounding-esistor Monitor Page ev *DS *DS *E00() *E00() *E00(0) 0 *E00() *DS SE-0(0) Idc SE-0() T OTO POWE X X G T GOUD FAUT X X ED T ESISTO FAUT X X ED 0 0 SE-0() SE-0() SE-0() *S PUSE P ESET 0 SE-0() 0 0 SE-0() DOO WIIG (EA VIEW) P *S *DS(+) *DS(-) SE-0 OK FUSE F, F, F ATIG 0. A, 00 VA ITTEFUSE KD.00TXP 0. A, 00 VA ITTEFUSE KK.00 T T OK T TX TX *T 0 VA OK 9 ED 0 K SHD G OK TH F TH F *OTE TH F TM OK *E00(9) *TX SE-0() SE-0() SE-0() OPTIOA IOMIG 0 VA Y USTOME OTES:. T IS SET FO IOMIG. FO 0V IOMIG, MOVE F-TO-T OETIO FOM TH TO TH.. DESIGATOS WITH EADIG * AE OPTIOA.. MIIMUM SUPPY ODUTO ATIG 90º..DASHED IES IDIATE FIED WIIG. *DS 0 *DS OK T(X) SE-0() *TX *TX OPTIOA IOMIG 0 / 00 V Y USTOME SE-0 TIP G EOSUE 0 9 *E00-0. A ØA *F - 0. A Ø *F - 0. A Ø *F - 0. A S SHD 9 *F *F *F SE-0(9) SE-0() SE-0() T(X) *TH *E00() *TH *E00() *E00() G ED K OK SE-0() SE-0() SE-0(0) SE-0() SE-0() TM SE-0() FIGUE 9. SE-0 Surface-Mount Model (GM-E-XX0-XX) Wiring abel.
16 FUSE F, F, F 0 ATIG 0. A, 00 VA ITTEFUSE KD.00TXP 0. A, 00 VA ITTEFUSE KK *DS DOO WIIG (EA VIEW) TM 0 *E00() SE-0(0) Idc SE-0() *S PUSE SE-0() 0 0 SE-0() OPTIOA IOMIG 0 VA Y USTOME OPTIOA IOMIG 0 / 00 V Y USTOME OK 0 0 *S 9 0 SE-0 0 *DS(+) 09 *DS(-) OK ED 9 K 0 SHD 9 OK G OK T TX TX OK OK SE-0() SE-0 OTES: TIP. T IS SET FO IOMIG. FO 0V IOMIG, MOVE F-TO-T OETIO G FOM TH TO TH. EOSUE. DESIGATOS WITH EADIG * AE OPTIOA.. MIIMUM SUPPY ODUTO ATIG 90º..DASHED IES IDIATE FIED WIIG. *DS 0 0 *DS *E00 9 *TX *TX F TH *T F 0 VA TH *OTE F TH - 0. A ØA *F - 0. A Ø *F - 0. A Ø *F - 0. A G ED S K SHD *F *F *F SE-0() *TH *E00() *TH *E00() *E00() OK SE-0() SE-0() SE-0(0) SE-0() SE-0() TM SE-0() EUTA-GOUDIG-ESISTO SE-0 MOITO GOUD FAUT TIP EAY K 0 0 POWE MEM V TIP EVE ( S 0 KΩ 00 KΩ) V x V x.0 A GF TIP TIME (s) DIAGOSTI AIATED ESET ESISTO FAUT TIP G A PUSE PEIOD (s) GM-E Enclosed eutral-grounding-esistor Monitor Page ev *DS *E00() *E00() *DS *E00(0) *E00(9) *TX SE-0() SE-0() SE-0() () 0. A ØA(F) 0. A Ø(F) 0. A Ø(F) 0. A 9 0 SH D D DG DA D D DISPAY FAUT E00 SEIES GOUD-FAUT & -VOTAGE IDIATO 0/00 0/0 AH H H A 9 S T 0 VA SHD ITEIO GM-E A ITTEFUSE STATO EAKAGE UET GF TIP EVE (% T ATIG) OFF O PUSE EAE SIDE OTE:. SHOW WITH A OPTIOS AVAIAE. FOT FIGUE 0. SE-0 Panel-Mount Model (GM-E-XX-) Interior/Exterior Details.
17 GM-E Enclosed eutral-grounding-esistor Monitor Page ev FUSE F, F, F *DS 0 *E00(0) SE-0() *DS SE-0(0) ATIG 0. A, 00 VA ITTEFUSE KD.00TXP 0. A, 00 VA ITTEFUSE KK.00 0 *E00() 0 *E00() 0 *DS Idc *S PUSE 0 0 DOO WIIG (EA VIEW) TM *E00() SE-0() SE-0() OPTIOA IOMIG 0 VA Y USTOME OTES:. T IS SET FO IOMIG. FO 0V IOMIG, MOVE F-TO-T OETIO FOM TH TO TH.. DESIGATOS WITH EADIG * AE OPTIOA.. MIIMUM SUPPY ODUTO ATIG 90º..DASHED IES IDIATE FIED WIIG. OK OK OK OK T TX T 0 VA ED 9 K 0 SHD G TX OK *DS 0 0 *DS OK 9 T(X) SE-0() *TX *TX OPTIOA IOMIG 0 / 00 V Y USTOME SE-0 TIP G EOSUE SE-0 *T 0 VA *E00(9) *TX SE-0() SE-0() SE-0() ØA Ø Ø *E *S *DS(+) 09 *DS(-) 9 TH TH TH *F *F *F F F *OTE F SE-0() - 0. A *F - 0. A *TH *E00() *F - 0. A *TH *E00() *F - 0. A *E00() G OK SE-0() ED SE-0() SE-0(0) S SE-0() K SE-0() SHD TM SE-0() () 0. A ØA(F) 0. A Ø(F) 0. A Ø(F) 0. A 9 0 S SHD D D DG DA D D DISPAY FAUT A SH G E00 SEIES GOUD-FAUT & -VOTAGE IDIATO 0/00 0/0 AH H H A 9 FIGUE. SE-0 Panel-Mount Model (GM-E-XX-X) Interior Details.
18 GM-E Enclosed eutral-grounding-esistor Monitor Page ev FUSE F, F, F ATIG 0. A, 00 VA ITTEFUSE KD.00TXP 0. A, 00 VA ITTEFUSE KK.00 TM OK OK ED 9 K 0 SHD OK G SE *S 0 *DS(+) 09 *DS(-) 0 *E00() OK T TX TX *T 0 VA TH TH TH F F *OTE F *DS 0 *DS *E00(0) SE-0() SE-0(0) 0 *E00() 0 *E00() *DS Idc *S PUSE 0 0 DOO WIIG (EA VIEW) SE-0() SE-0() OPTIOA IOMIG 0 VA Y USTOME OTES:. T IS SET FO IOMIG. FO 0V IOMIG, MOVE F-TO-T OETIO FOM TH TO TH.. DESIGATOS WITH EADIG * AE OPTIOA.. MIIMUM SUPPY ODUTO ATIG 90º..DASHED IES IDIATE FIED WIIG. OK *DS 0 *DS OK T(X) SE-0() *TX *TX OPTIOA IOMIG 0 / 00 V Y USTOME SE-0 TIP G EOSUE *E00(9) *TX 0 9 SE-0() SE-0() SE-0() *E00-0. A ØA *F - 0. A Ø *F - 0. A Ø *F - 0. A S SHD 9 *F *F *F SE-0() *TH *E00() *TH *E00() *E00() G ED K OK SE-0() SE-0() SE-0(0) SE-0() SE-0() TM SE-0() FIGUE. SE-0 Panel-Mount Model (GM-E-XX-XX) Wiring abel.
19 GM-E Enclosed eutral-grounding-esistor Monitor Page ev TEHIA SPEIFIATIOS Supply: GM-E VA, 0 Vac (+0, -%), 0 Hz GM-E E00... ma, 0/00 Vac, 0 Hz, -phase, -wire (no neutral) Monitor... VA, 0 Vac (+0, -%), 0 Hz GM-E-000-0, GM-E VA, 0/00 Vac, 0 Hz, -phase, -wire (no neutral) GM-E-XX-X0, GM-E-XX-X0, GM-E-XX-X0, GM-E-XX-X0... VA, 0 Vac (+0, -%), 0 Hz GM-E-XX-X0, GM-E-XX-X0, GM-E-XX-X0, GM-E-9XX-X0 E00... ma, 0/00 Vac, 0 Hz, -phase, -wire (no neutral) Monitor... VA, 0 Vac (+0, -%), 0 Hz GM-E-XX-X, GM-E-XX-X, GM-E-XX-X, GM-E-XX-X, GM-E-XX-X, GM-E-XX-X, GM-E-XX-X, GM-E-9XX-X... VA, 0/00 Vac, 0 Hz -phase, -wire (no neutral) Wiring equirements: Terminals locks: onductor Size... 0 to 0 AWG (0. to. mm ) Fuseholders: onductor Size... to AWG (.0 to.9 mm ) Fuse equirements: : Fuse ating A, 00 Vac, lass Fuse Part umber... ittelfuse KD.00T or KD.00TXP (ohs) F to F (see order options): Fuse ating A, 00 Vac, Fuse Part umber... ittelfuse KK.00 Dimensions: Height... mm (.9 ) Width... 0 mm (.0 ) Maximum Depth (with SE-IPV-G installed).. mm (0. ) learance required to open SE-IPV-G... mm (. ) Shipping Dimensions: GM-E-XXX-XX: Height... mm (0. ) Width... mm (. ) Depth mm (. ) Shipping Weight: GM-E-XXX-XX.... kg (0 lb) maximum Enclosure... Polyester, ockable atings: SE- Order Options... Type X SE-0 Surface-Mount Order Options... Type X SE-0 Panel-Mount Order Options... IP Environment: Operating Temperature to 0 (-0 to 0 F) Storage Temperature... - to 0 (- to F) Humidity... % on-ondensing ertification... SA, anada and USA To: SA. o. Ground Fault ircuit Interrupters SA. o. 9 Special Purpose Enclosures U 0 Ground Fault Sensing and elaying Equipment U 0 Enclosures for Electrical Equipment US
20 GM-E Enclosed eutral-grounding-esistor Monitor Page ev ODEIG IFOMATIO GM-E- - ontrol-power Transformer Option 0 o PT 0/00-V PT () Ammeter & Pulse ontrol Option 0 o ammeter Earth-leakage panel meter () Earth-leakage panel meter & pulse-enable switch () G Monitor Mounting Option 0 Surface-mounted G monitor () Panel-mounted G monitor () etwork ommunications Option 0 o network communications Deviceet () Ethernet, dual J () Ethernet, J & fiber () Ethernet, dual fiber () IE 0, dual J () IE 0, J & fiber () IE 0, dual fiber () Protection elay Option 0 SE- SE- & voltage indication () SE-0 (.O. K) SE-0 (.O. K) & voltage indication () SE-0 (.. K) SE-0 (.. K) & voltage indication () SE-0HV (.O. K) SE-0HV (.O. K) & voltage indication () SE-0HV (.. K) 9 SE-0HV (.. K) & voltage indication (). WAATY The GM-E Enclosed eutral-grounding- esistor Monitor is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. ittelfuse Startco will (at ittelfuse Startco s option) repair, replace, or refund the original purchase price of an GM-E that is determined by ittelfuse Startco to be defective if it is returned to the factory, freight prepaid, within the warranty period. This warranty does not apply to repairs required as a result of misuse, negligence, an accident, improper installation, tampering, or insufficient care. ittelfuse Startco does not warrant products repaired or modified by non-ittelfuse Startco personnel. OTES: () Includes fuses. () SE-0 models only. () SE-0 models only, excluding SE-0HV models. () Includes panel-mounted indication & reset, and US connector for SE-0 models. () SE-0 models only; includes IP hinged transparent cover.
21 GM-E Enclosed eutral-grounding-esistor Monitor Page ev MAUA EEASE DATE March, 0 April, 0 APPEDIX A GM-E EVISIO HISTOY MAUA EVISIO A-0 PODUT EVISIO (EVISIO UME O PODUT AE) 00 MAUA EVISIO HISTOY EVISIO 0--0 SETIO Added enclosure ratings. SETIO Updated Figs.,,,, and. SETIO Added enclosure ratings and SA certification. APPEDIX A Updated revision history. EVISIO 0-A-0 Initial release. PODUT EVISIO HISTOY EVISIO 00 Initial release.
22 GM-E Enclosed eutral-grounding-esistor Monitor Page ev This page intentionally left blank.
CR10XTCR THERMOCOUPLE REFERENCE
CR10XTCR THERMOCOUPLE REFERENCE REVISION: 01/01/03 COPYRIGHT (c) 1995-2003 CAMPBELL SCIENTIFIC, INC. This is a blank page. WARRANTY AND ASSISTANCE The CR10XTCR THERMOCOUPLE REFERENCE is warranted by CAMPBELL
More information16 Input AC Block I/O Module
6 Input AC Module Cat. No. 79-6A0 Series B Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air flow through
More informationTHF / 1SCC330001M THF 1S1 C
THF 2247 0191/ 1SCC330001M5803 34 THF 1S1 C Installation and Operation Instruction for THF Filter and Protective Unit THF 1_ THF 1S_ THF 1BS_ General guidelines Due to the fact that most UK building earth
More informationCR10XTCR THERMOCOUPLE REFERENCE
CR10XTCR THERMOCOUPLE REFERENCE REVISION: 1/03 COPYRIGHT (c) 1995-2003 CAMPBELL SCIENTIFIC, INC. This is a blank page. Warranty and Assistance The CR10XTCR THERMOCOUPLE REFERENCE is warranted by CAMPBELL
More informationPanel Mount, Single Phase 120 and 240 Volt Fixed Shaft (click blue text for more details)
Staco Energy Products Co. has been a leading manufacturer of variable transformers for over 60 years, building standard as well as custom-designed products for industrial, commercial and military applications.
More informationTime - timing relays 1 Industrial relays, solid state output, width 22.5 mm
haracteristics Zelio ime - timing relays Industrial relays, solid state output, width. mm Presentation 08 he E9 range of relays is designed for simple, repetitive applications with short and intensive
More information32 Input AC Block I/O Module
Input AC Module Cat. No. 79-A0 Series B Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air to flow through
More informationCR10TCR THERMOCOUPLE REFERENCE
CR10TCR THERMOCOUPLE REFERENCE REVISION: 12/96 COPYRIGHT (c) 1995-1996 CAMPBELL SCIENTIFIC, INC. This is a blank page. WARRANTY AND ASSISTANCE The CR10TCR THERMOCOUPLE REFERENCE is warranted by CAMPBELL
More informationIntegrated Suppression Module
TM ISMS u r g e P R O T E C T I O N Integrated Suppression Module ISM Installation, Operation and Maintenance Manual PN 750-0072-010 Rev A01 Electrical Transient Suppression Filter Systems 2 The ISM TM
More informationField Pro Operation and Installation Manual
Field Pro Operation and Installation Manual Xtreme Research Corporation SkyScan Division P.O. Box 336, Port Richey, FL 34673-0336 1-800-732-0665 Table of Contents 1. Installation 3 2. Operation 5 3. Care
More informationRequest Ensure that this Instruction Manual is delivered to the end users and the maintenance manager.
Request Ensure that this Instruction Manual is delivered to the end users and the maintenance manager. 1 -A - Introduction - Thank for your purchasing MITSUBISHI ELECTRIC MELPRO TM D Series Digital Protection
More informationtechnical bulletin Installation Instructions: Wall-Mount Dewpoint Probe ( )
Installation Instructions: Wall-Mount Dewpoint Probe (809-2011) The HMW90 Wall-Mount Dewpoint Probe (P/N 809-2011) HMW90 measures dewpoint for indoor applications such as anti-sweat heater control and
More informationISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER
ISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER CAUTION: This equipment is designed for connection to mains voltages and must be used in accordance with this guide. If it is not, the safety protection
More informationMODEL 107 TEMPERATURE PROBE INSTRUCTION MANUAL
MODEL 107 TEMPERATURE PROBE INSTRUCTION MANUAL REVISION: 6/00 COPYRIGHT (c) 1983-2000 CAMPBELL SCIENTIFIC, INC. This is a blank page. Warranty and Assistance The MODEL 107 TEMPERATURE PROBE is warranted
More informationISOCON-6. 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER
ISOCON-6 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility for damage, injury, loss or expense resulting
More informationNumber of poles 1-pole 2-pole Minimum Enclosure Contact G2R-1A-E G2R-1-E
The Best Seller eneral purpose power elays of single-pole0 A and double-pole A. Safety-oriented design with dielectric strength of,000 V between coil and contacts, and surge resistance of 0,000 V. and
More informationOverload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011
SIRIUS 3RU1 Thermal Overview 1 2 7 3 4 6 "Increased safety" type of EEx e according to ATEX directive 94/9/EC The 3RU11 thermal overload relays are suitable for the overload of explosion-proof motors with
More informationMKIII -MB USER S GUIDE 09/18/18. Rev. 3
MKIII -MB USER S GUIDE 09/18/18 Rev. 3 Copyright 2018 by RainWise, Inc. All rights reserved. No part of this work may be reproduced in any form except by written permission of the publisher. All rights
More informationThe Ordering Code for various standard model Recorders with an AC supply and without any additional options are as follows:
The basic PC software is supplied free with the recorder. There is an additional charge for the extensive Data Acquisition Software supplied with communication of RS-232/422/485 or Ethernet. The Ordering
More informationPTA-427 BAROMETRIC PRESSURE TRANSDUCER OPERATOR S MANUAL
PTA-427 BAROMETRIC PRESSURE TRANSDUCER OPERATOR S MANUAL REVISION: 4/95 COPYRIGHT 1991, 1995 CAMPBELL SCIENTIFIC, INC. WARRANTY AND ASSISTANCE The PTA-427 Barometric Pressure Transducer is warranted by
More informationInstruction. Vacuum Circuit Breaker Operator Module. Type 3AH 4.16kV to 38kV. Power Transmission & Distribution
Instruction 0001-22-2--00 Vacuum Circuit Breaker Operator Module Type 3AH 4.16kV to 38kV Power Transmission & Distribution Hazardous voltages and high-speed moving parts. Will cause death, serious injury
More information473 Dew Point Hygrometer
gh Performance Chilled Hygrometer With Cable Mounted Measuring Heads ghly precise chilled mirror dew point technology Cable mounted dew point and temperature measurement Aspirated and direct insertion
More informationFile E28476 Vol. 7 Sec. 44 Page 1 Issued: Vol. 23 Sec. 18 Revised: Vol. 67 Sec. 4 and Report D E S C R I P T I O N
File E28476 Vol. 7 Sec. 44 Page 1 Issued: 1990-08-07 Vol. 23 Sec. 18 Revised: 2014-04-18 PRODUCT COVERED: USR - Series SL.156 Connectors. D E S C R I P T I O N USR - SL-156 Connectors, Receptacle Part
More informationRequest Ensure that this Instruction Manual is delivered to the end users and the maintenance manager.
Request Ensure that this Instruction Manual is delivered to the end users and the maintenance manager. 1 -C - Safety section - This Safety section should be read before starting any work on the relay.
More informationSECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:
SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine
More information473 Dew Point Hygrometer
High Performance Chilled Mirror Hygrometer With Cable Mounted Measuring Heads Highly precise chilled mirror dew point technology Cable mounted dew point and temperature measurement Aspirated and direct
More informationVIBRATION METER. Instruction Manual.
VIBRATION METER 840063 Instruction Manual CONTENTS Title Page I. Introduction... 2 II. Panel Description... 3 III. Operating Instructions A. General Measurement Procedures... 3~4 B. Peak... 5 C. Data Hold...
More informationMET ONE RAIN GAGE MODELS 380, 385, 380M, 385M
MODELS 380, 385, 380M, 385M REVISION: 2/96 COPYRIGHT (c) 1993-1996 CAMPBELL SCIENTIFIC, INC. WARRANTY AND ASSISTANCE The MET ONE RAIN GAGE--MODELS 380, 385, 380M, 385M is warranted by CAMPBELL SCIENTIFIC,
More informationIR/Thermistor Pen. Instruction Manual
IR/Thermistor Pen 800108 Instruction Manual IR/Thermistor Pen 800108 Copyright 2010 by Sper Scientific ALL RIGHTS RESERVED Printed in the USA The contents of this manual may not be reproduced or transmitted
More information473-SHX Dew Point Mirror
Humidity and Temperature Reference Hygrometer For Temperature up to 125 C Precise and stable chilled mirror dew point mirror technology High temperature optical components High temperature sample fan Cable
More informationEmergency lighting units EM Inverter
T T TC- TC-F DE TC- TC-SE TC-TE TC-DD Tc EM G, 0 0 V 0/0 Hz BASIC version Product description Emergency lighting supply unit for manual testing For linear and compact fluorescent lamps ow-profile casing
More informationRemote Display Unit. Installers Handbook Copyright 2001 AirSense Technology Ltd. LM Remote Display Unit Installers Handbook Issue 1.
Remote Display Unit Installers Handbook Copyright 2001 AirSense Technology Ltd AirSense, ClassiFire, FastLearn PipeCAD, SenseNET, Stratos-HSSD and Stratos-Quadra are trademarks. HSSD is a Registered Trademark.
More informationct m ive p 5/EC Thermal cut-outs
RoHS Compliant Directive //EC Marking of switches type: AM, AF, AB,, AA. AM0. 0. 0 0/0 -. 0 Strip length Second conductor length First conductor length Type of thermal cut-out Rated switching temperature
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationInstallation and Operation Manual. AllSync Plus Wired Clocks
and Operation Manual AllSync Plus Wired Clocks Part # H004881 Rev. 4 September 2018 Safety Precautions AllSync Plus Clock & Operation Manual Troubleshooting General Operation Introduction Safety Precautions
More informationTeSys enclosed starters 2
Characteristics, references TeSys enclosed starters D..L. starters for motor control 0. to. kw with -phase thermal overload relay with protected phases Characteristics () Conforming to standards IEC 0--,
More informationHeat Meter WR 200-D. 2 temperature inputs for Pt100 in four-wire circuit. Exact calculation of the heat parameters according IAPWS-IF97
Heat Meter WR 200-D electronic computing device for heat quantity measuring Heat transfer medium water steam Any flow sensor with analog signal connectable 2 temperature inputs for Pt100 in four-wire circuit
More informationSK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationLamp and Control Panel (Lamp Panel)
www.reinhausen.com Lamp and Control Panel (Lamp Panel) Operating Instructions BA 47/0 EN NOTE! Changes may have been made to a product after going to press with this documentation. We expressly reserve
More information2.12. Ex-Linear light fittings for fluorescent lamps - max. ambient temperature + 60 C - nllk W - 58 W for Zone 2 and 22
.1 Ex-Linear light fittings for fluorescent lamps - max. ambient temperature + C - nllk 09 18 W - 58 W for Zone and The lighting solution for high temperatures up to C The linear luminaires series nllk
More informationLUDLUM MODEL 42-5 NEUTRON BALL CART. August 2015 Serial Number PR and Succeeding Serial Numbers
LUDLUM MODEL 42-5 NEUTRON BALL CART August 2015 Serial Number PR149512 and Succeeding Serial Numbers LUDLUM MODEL 42-5 NEUTRON BALL CART August 2015 Serial Number PR149512 and Succeeding Serial Numbers
More informationEZ-LIGHT Touch Gen 2 K50 FDA-Grade Illuminated Multipurpose Buttons
EZ-LIGHT Touch Gen K0 FD-Grade Illuminated Multipurpose uttons Datasheet General Purpose Multicolor Indicator with Independent Momentary Touch utton Output FD-grade materials; rated to IE IP, IP, and IP9K
More informationH i g h A m p e r a g e 2 5 t o A M P. T y p e I & I I I V e h i c l e P r o t e c t i o n. I P 6 7 W a t e r p r o o f
H i g h A m p e r a g e 2 5 t o 3 0 0 A M P T y p e I & I I I V e h i c l e P r o t e c t i o n I P 6 7 W a t e r p r o o f I g n i t i o n - P r o t e c t e d S A E & A B Y C C o m p l i a n t L E D T
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function SITRANS LH00 Transmitter for hydrostatic level U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/
More informationMinute Impulse Clock Controller I01DN
99b-mi USER S MANUAL Minute Impulse Clock Controller Mon Jun 01, 2009 12:00:00 PM DST HOLD ENTER KEY TO BEGIN CANCEL HR I01DN 97 West Street Medfield, MA 02052 U.S.A. (508) 359-4396 Pg. 2 of 20 TABLE OF
More information5SJ4...-.HG Circuit Breakers to IEC and UL 489
Siemens AG 009 5SJ...-.HG Circuit Breakers to IEC and UL 89 BETA Low-Voltage Circuit Protection Compliance with industry standards is a must in today's manufacturing environment. Worldwide acceptance is
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationUser s Manual: MODEL 904-T CLINOMETER PAK
User s Manual: MODEL 904-T CLINOMETER PAK Model 904-T Serial No. Bipolar Output (±2.5 volts typical): Unipolar Output (0-5 volts typical): Model 870 Readout Module Serial No. (optional) 2007 Applied Geomechanics
More informationMulti-function, economical instrument with 4 functions in the same casing. Accessibility and safety: large-dimension terminals Insulated circuits
200 > Measurement and instrumentation Programmable digital transducers TRIAD 2 range Programmable digital transducers with to 4 analogue outputs Programmable accuracy class PRODUCT ADVANTAGES Up to 4 PROGRAMMABLE
More informationNOVALYNX CORPORATION MODEL 110-WS-16BP BAROMETRIC PRESSURE SENSOR INSTRUCTION MANUAL
NOVALYNX CORPORATION MODEL 110-WS-16BP BAROMETRIC PRESSURE SENSOR INSTRUCTION MANUAL REVISION DATE: OCT 2005 Receiving and Unpacking Carefully unpack all components and compare to the packing list. Notify
More informationImpedance relay and protection assemblies
RXZK 21H, 22H, 23H 509 006-BEN Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice (SE970175) (SE970184) Features Micro-processor based impedance relay with R and X settings
More information3WHB10K 3-WIRE HALF BRIDGE TERMINAL INPUT MODULE INSTRUCTION MANUAL
3WB10K 3-WIRE ALF BRIDGE TERMINAL INPUT MODULE INSTRUCTION MANUAL 3/96 COPYRIGT (c) 1996 CAMPBELL SCIENTIFIC, INC. This is a blank page. WARRANTY AND ASSISTANCE The 3WB10K 3-WIRE ALF BRIDGE TERMINAL INPUT
More informationFigure 1-44: 4-Wire Wye PT Configurations
Principles and Practice ii) PT onnection There are two most common PT combinations on three-phase, three-wire systems as shown in Figure 1-43. The vector diagrams are identical between PT configurations
More informationTRUMPET REFERENCE Vacuum Tube Phonostage
TRUMPET REFERENCE Vacuum Tube Phonostage Made in USA. TRUMPET REFERENCE Vacuum Tube Phonostage Copyrights & Trademarks Copyright 0. All rights reserved. No part of this document may be photocopied, reproduced,
More informationDATA SHEET: TEMPOWER2 ACB
Electrical haracteristics to IE 097, IE 097 Type Series AMERE RATING(A) AR0SB Standard RATED URRENT (max) [I n ](A) JIS,IE, EN, AS NEMA, ANSI Marine NEUTRAL OLE AMERES FRAME (A) NUMBER OF OLES 3 RATED
More informationINSTRUCTION MANUAL ANALOG COLORIMETER
INSTRUCTION MANUAL ANALOG COLORIMETER QUICK CHECK/OPERATION 1. OPEN SHIPPING BOX - TAKE OUT INSTRUMENT 2. ANY DAMAGE? - REPORT TO FREIGHT COMPANY - CALL DISTRIBUTOR/FACTORY 3. SET WAVELENGTH DIAL TO CORRECT
More informationINSTRUCTION MANUAL. CR10XTCR Thermocouple Reference. Revision: 1/03. Copyright (c) Campbell Scientific, Inc.
INSTRUCTION MANUAL CR10XTCR Thermocouple Reference Revision: 1/03 Copyright (c) 1995-2003 Campbell Scientific, Inc. Warranty and Assistance The CR10XTCR THERMOCOUPLE REFERENCE is warranted by CAMPBELL
More informationZelio Relay - Solid State Relays
Selection guide SSR solid state relays Applications Panel mounted PF00--Q Contact type N/O SPST contact Control voltage ranges a 0 0 V c V Operating voltages a 0 V, 0 V, 0 V Type of switching a Zero voltage
More informationUser s Guide. Waterproof Palm ph Meter Model PH220. Introduction
User s Guide Waterproof Palm ph Meter Model PH220 Introduction Congratulations on your purchase of the Extech PH220 waterproof ph/mv meter. This microprocessor-based device with tactile buttons is battery
More informationDIN Timers TD. Options and ordering codes. Specification
DIN imers D 17.5mm or 22.5mm DIN rail mounting Electronic imers Wide coil operation, 24V to 320V AC/DC Multi ime range / Multi function ON-Delay, OFF-Delay, Asymetrical, Star/Delta versions Perfect to
More informationHARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
More informationINSTRUCTION MANUAL FOR MM10 Relay
INSTRUCTION MANUAL FOR MM10 Relay Motor Protection Relay Front Panel Overview V1 250614 MM10 Motor Protection Relay a I L1 b I L2 I L3 c h i d e I L1 Figure 1: Front panel overview f g I L2 a Run LED b
More informationInstallation guide 862 MIT / MIR
Installation guide 862 MIT / MIR in combination with: 864 MTT or 863 MRT or (dual) spot element November 2005 Part no. 4416.232_Rev3 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100
More informationSmall Absolute Pressure Sensor
Small Absolute Pressure Sensor SM5420E Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 95 millivolt span Constant current or constant voltage drive or non-ported
More informationLD-LP-LL-LC Rope Safety Switches with reset for emergency stop
TECHNICA DATASHEET D-P--C Rope Safety Switches with reset for emergency stop Metal or polymer housing, from one or three conduit entries Protection degree IP6 In conformity with EN ISO 13850 contact blocks
More informationMotor Protection Circuit Breaker Series 8146/5-V27
> For protection of Ex e and Ex d motors > Protects electric lines and plant equipment > Thermal overcurrent adjustable, phase failure sensitive > Electromagnetic quick release 02966E00 > Robust enclosure
More informationMODEL: R7K4FML3. Remote I/O R7K4F Series. POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.)
Remote I/O R7KF Series I/O MODULE (-III) POWER INPUT DC power R: V DC (Operational voltage range: ±0 %; ripple 0 %p-p max.) 0 (8.7). (.) 7(.8) mm (inch) [] OPTIONS (multiple selections) Output data read
More informationNon-Fused. Series DS2 IEC Non-Fused 12 Disconnect Switches. Accessories 15. Specifications 16. Dimensions 17. See Enclosed Disconnects 21
s e r i e s c3controls offers the most rugged, dependable Disconnect Switches that money can buy. From Panel/Base Mount to Door Mount with switch ratings from 16A - 125A, we ve got what you need. And,
More informationOperating instructions Vortex flow meter. SVxxx / / 2015
Operating instructions Vortex flow meter SVxxx0 80229859 / 00 06 / 2015 Contents 1 Safety instructions...3 2 Functions and features...3 3 Function...4 4 Installation...4 5 Electrical connection...6 6 Operating
More informationPressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
More informationSmall Gage Pressure Sensor
Small Gage Pressure Sensor FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported configuration
More informationNo /06e. Technical Manual Multistage-Temperature-/Differential Controller TAR x700
Technical Manual Multistage-Temperature-/Differential Controller x700 Software Version 0078 o. 5303-0/06e 700 3700 5700 9700 3700 5700 9700 l Suitable as : Multistage Controller or Differential Controller
More informationBETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008
LV HRC fuse links Overview LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in switchboards of power supply companies. They therefore protect
More informationINSTRUCTION AND MAINTENANCE MANUAL FOR TECHTROL COUNTER CONTROLLER & TOTALISER (TCCT)
INSTRUCTION AND MAINTENANCE MANUAL FOR TECHTROL COUNTER CONTROLLER & TOTALISER (TCCT) ( Document No. : MAN / TCCT / Rev. 01 / 09-2006. ) V:001453Ltr T Time:H0086:M43 THERMAX CONTENTS 1 Introduction & Working
More informationEZ-LIGHT Touch Gen 2 K50 Series Illuminated Multipurpose Buttons
EZ-LIGHT Touch Gen K0 Series Illuminated Multipurpose uttons Datasheet General Purpose Multicolor Indicator with Independent Momentary Touch utton Output Excellent immunity to false triggering by water
More information3M HDC Socket.100 Right Angle, PCB, 3 or 4-Row, Solder Tail or Press-Fit HDC Series
M HDC Socket.100 Right Angle, PCB, or 4-Row, Solder Tail or Press-Fit HDC Series High density -row version, up to 240 contacts single bay Mates with -row single plugs and headers High density 4-row version,
More informationMini Environmental Quality Meter
Mini Environmental Quality Meter 850027 Mini Environmental Quality Meter 850027 Copyright 2012 by Sper Scientific ALL RIGHTS RESERVED Printed in the USA The contents of this manual may not be reproduced
More informationModel 33SZ Basic Unit OPTIONAL FILTER RH COIL CONNECTION PRIMARY/ DEDICATED OUTDOOR AIR MULTI-POINT FLOW SENSOR 5 3/4" (146)
DESRIPTION: Sensible cooling coil on the induced air inlet handles zone sensible load. Opposite side to controls location. luminum ripple fins (10 PI) and 1/" (13) copper tubes. and of coil connection
More informationFlexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB March 2008
Flexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB41-078 March 2008 FT-19R and FT-19RX FT-19R 3RU with Individual Clear Covers APPLICATION FEATURES The type FT-19R (standard length) and
More informationS Sapling INSTALLATION MANUAL FOR FIELD SELECTABLE ANALOG CLOCKS SAA SERIES SPECIFICATIONS. advanced time and control systems
INSTALLATION MANUAL FOR FIELD SELECTABLE ANALOG CLOCKS SAA SERIES SPECIFICATIONS Time base: 60 Hz (3-wire system) Quartz (2-wire system) Power input: 85 135 VAC / 60 Hz 7 28 VAC / 60 Hz Current consumption:
More informationDRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationWeatherHub2 Quick Start Guide
WeatherHub2 Quick Start Guide Table of Contents 1 Introduction... 1 2 Packing List... 1 3 Connections... 1 4 IP Addressing... 2 5 Browser Access... 3 6 System Info... 3 7 Weather Station Settings... 4
More informationQUANTUM CONCEPT. Swimming User s Manual
QUANTUM CONCEPT Swimming User s Manual 480.508.0 Version.4 Edition July 05 Documentation Updates Swiss Timing Ltd. reserves the right to make improvements in the products described in this documentation
More informationCoating Thickness Gauge TW-8. art. nr Thoma Tel./Fax: Operation Manual
Coating Thickness Gauge art. nr. 59252 Table of contents 1. Technical specifications...3 2. Getting started...3 3. Gauge manual...6 The price of this product includes the recycling fee of 0,10 PLN Guarantee...11
More informationKZPb
---------------------------------------------------------- ---------------------------------------------------------------------- Electronic constant pressure regulator FUNCTION KZP is an electronic pressure
More informationPassivated ultra sensitive gate thyristor in a SOT54 plastic package. Earth leakage circuit breakers or Ground Fault Circuit Interrupters (GFCI)
Rev. 2 31 July 28 Product data sheet 1. Product profile 1.1 General description Passivated ultra sensitive gate thyristor in a SOT54 plastic package. 1.2 Features Ultra sensitive gate Direct interfacing
More informationKZMb
-------------------------------------------------------- Electronic zone controller for pressure regulation ---------------------------------------------------------------------- FUNCTION KZM is an electronic
More informationTeSys circuit-breakers
Presentation Thermal-magnetic motor circuit-breakers types GV2, GV and GV7 GV2-ME, GV2-P, GV-ME and GV7-R motor circuit-breakers are -pole thermal-magnetic circuit-breakers specifically designed for the
More informationZone distribution boxes
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 CONTENTS Page 1. General characteristics....1 2. Presentation...2 3. Use scenarios....3 4. Technical characteristics...3
More informationTable of Contents Pin-Configuration Selection Guide for HDE, HDS, & EFP
Table of Contents -Configuration Selection Guide for HDE, HDS, & EFP Service Voltage Rating... Electrical Service Ratings... Ampacity Ratings by Contact... Electrical Service Ratings Explained... Operating
More informationSKELESCOPE REFLECTOR TELESCOPE WITH TABLE TOP TRIPOD SK-100 INSTRUCTION MANUAL
TM SKELESCOPE REFLECTOR TELESCOPE WITH TABLE TOP TRIPOD SK-100 INSTRUCTION MANUAL TABLE OF CONTENTS Introduction Box Contents / Visual Key Diagram Telescope Assembly Setting up Your Telescope Attaching
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-T...
Magnetic and Hydraulic-Magnetic Circuit Breaker 830-T... Description ngle, two and three pole magnetic and hydraulic-magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of
More informationMelton Series. Owners Manual. Lab Centrifuge. Model # s A C, A C, B C, B C, C C, C C, D C, D C
Melton Series Owners Manual Lab Centrifuge Model # s A-4-115-C, A-4-220-C, B-4-115-C, B-4-220-C, C-4-115-C, C-4-220-C, D-4-115-C, D-4-220-C Serial Numbers 85500 & Above NOTICE Wire this centrifuge according
More information40 CD RANGE FLUSH-MOUNTING DISTRIBUTION BOARDS AND ENCLOSURES
DISTRIBUTION BOARDS FLUSH-MOUNTING DISTRIBUTION BOARDS GWTEST SOFTWARE (see page 322) Complementary system items Ordinary installation - protected flush mounting DISTRIBUTION / JUNCTION Protection devices...
More informationIRTS-P PRECISION INFRARED TEMPERATURE SENSOR INSTRUCTION MANUAL
IRTS-P PRECISION INFRARED TEMPERATURE SENSOR INSTRUCTION MANUAL 4/02 COPYRIGHT (c) 2002 CAMPBELL SCIENTIFIC, INC., APOGEE INSTRUMENTS, INC. This is a blank page. Warranty and Assistance The IRTS-P PRECISION
More informationUL 1077 DIN Rail Supplementary Protectors
UL 0 DIN Rail Supplementary Protectors Product Overview UL 0 DIN Rail Supplementary Protectors PRODUCT OVERVIEW Product Overview Standard Features WMZS breaker terminals provide finger and back-of-hand
More informationTransmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level
Overview Function s are for measuring the liquid levels in wells, tanks, channels and dams. Sensor Diaphragm p U const. U +2 (brown) I EM I - (blue) 0, U B s are submersible sensors for hydrostatic level
More informationMX Series COMPACT AND USER FRIENDLY. Metal Tube Type Variable Area Flowmeter OUTLINE STANDARD SPECIFICATION MODEL CODE MX-400, MX-71 MX-52E
OMPT ND USER FRIENDLY MX Series Metal Tube Type Variable rea Flowmeter OUTLINE MX Series flowmeter is the metal tube type variable area flowmeter having the unified face-to-face dimension. The compact
More informationCAUTION: BEFORE YOU BEGIN, ALWAYS MAKE SURE THE WEAPON IS UNLOADED AND SAFE TO HANDLE.
CAUTION: BEFORE YOU BEGIN, ALWAYS MAKE SURE THE WEAPON IS UNLOADED AND SAFE TO HANDLE. ON Press either brightness button ( + or - ) to turn on the sight. The sight is also programmed to turn on when it
More informationEX-EMERGENCY LIGHT FITTINGS
EX-EMERGENCY LIGHT FITTINGS nllk 0...N 1-36 W Plastic version for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 N are conform to the requirements of the ATEX-Directive
More information