STEVAL-MKI109V2. emotion: ST MEMS adapters motherboard based on the STM32F103RE compatible with all ST MEMS adapters. Features.
|
|
|
- Esmond Long
- 6 years ago
- Views:
Transcription
1 EVAL-MKI0V emotion: MEMS adapters motherboard based on the MFE compatible with all MEMS adapters Data brief Features Compatible with all available MEMS adapter boards Controlled by the MFET highperformance ARM Cortex -M microcontroller Includes a DIL socket for easy MEMS adapter connection V on-board linear voltage regulator DFU compatible for USB microprocessor firmware update USB.0 full-speed compliant Debugging connector for SWD/JTAG RoHS compliant EVAL-MKI0V Description The EVAL-MKI0V is a motherboard designed to provide users with a complete, readyto-use platform for the evaluation of Microelectronics MEMS products. The board features a DIL socket to mount all available adapters for both digital and analog output MEMS devices. The motherboard includes a high-performance -bit microcontroller, which functions as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (GUI), or dedicated software routines for customized applications. November 0 Doc ID 0 Rev / For further information contact your local Microelectronics sales office.
2 Schematic diagrams EVAL-MKI0V / Doc ID 0 Rev Schematic diagrams Figure. Circuit schematic ( of ) INT INT pf Cosc pf Cosc M R OSCIN OSCOUT MHz Osc D D 0 R 0 R JP JP _u _u JP _u 0K R 0K R 0K R Rled Gled 0 R 0 R SW 0K R SW SW 0K R SW 0K R BOOT 0K R 0K R 0K R 0K R 0K R 0K R JTMS_SWDIO JTDI JNTR JTDO JTCK_SWCLK 0 Header J 0 Header J OUT OUT OUT OUT INT INT SCL_DEV SDA_DEV SDO_DEV CS_DEV Vref O O OUT OUT O DIL Device Adapter D D 0 SWD Connector J JP 00nF C 00nF C 0nF C uf C.uF C0 00nF C Vref_u OUT_u OUT_u OUT_u OUT_u INT INT JTMS_SWDIO OSCIN OSCOUT IC_SCL IC_SDA.K R.K R USARTRX USARTTX JTDI JNTR JTDO JTCK_SWCLK Rled Gled SW SW BOOT SW 00nF C OUT_u OUT_u IC_SCL IC_SDA R R SCL_DEV SDA_DEV 00nF C CS_DEV _u _u SPI_SCL SPI_SDA PA/ADC Vss Vdd PA/NSS/ADC 0 PA/SCK/ADC PA/MISO/ADC PA/MOSI/ADC PC/ADC PC/ADC PB0/ADC PB/ADC PB/BOOT PB0 PB 0 Vss Vdd PB/SPI_NSS PB/SPI_SCK PB/SPI_MISO PB/SPI/MOSI PC PC PC PC 0 PA/MCO PA/USART_TX PA0/USART_RX PA/ PA/ PA/JTMS-SWDIO Vss Vdd PA/JTCK/ SWCLK PA/JTDI 0 PC0 PC PC PB/JTDO PB/JNTR PB PB/IC_SCL PB/IC_SDA 0 PB PB Vss Vdd Vbat PC/Tamper/RTC PC/OSCin PC/OSCout 0/OSCin /OSCout PC0/ADC0 PC/ADC PC/ADC 0 PC/ADC VssA VddA PA0/WKUP/ADC0 PA/ADC PA/ADC MFET Copper area overlapped R R SPI_SDA SPI_SCL SDO_DEV 0 Header X JP 0 Header X JP GP_GPIO GP_GPIO TS UB TS UD TS UB TS UD OUT OUT OUT OUT OUT_u OUT_u OUT_u UT_u O TS UA 0 TS UC TS UA 0 TS UC OUT OUT OUT_u OUT_u Vref_u Vref GP_led 0 D GP_led - TS UA - TS UB O _u O_u O_u O_u O O O_u O_u R R R R O_u JP0 JP Header JP Header JP CE_RF CS_RF SCK_RF MOSI_RF MISO_RF IRQ_RF SCK_RF MISO_RF MOSI_RF CE_RF CS_RF IRQ_RF MHDRX JP AM0v
3 EVAL-MKI0V Schematic diagrams Figure. Circuit schematic ( of ) Doc ID 0 Rev /
4 Revision history EVAL-MKI0V Revision history Table. Document revision history Date Revision Changes 0-Nov-0 Initial release. / Doc ID 0 Rev
5 EVAL-MKI0V Please Read Carefully: Information in this document is provided solely in connection with products. Microelectronics NV and its subsidiaries ( ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All products are sold pursuant to s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the products and services described herein, and assumes no liability whatsoever relating to the choice, selection or use of the products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN S TERMS AND CONDITIONS OF SALE DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED REPRESENTATIVES, PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUAINING APPLICATIONS, NOR IN PRODUCTS OR SYEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by for the product or service described herein and shall not create or extend in any manner whatsoever, any liability of. and the logo are trademarks or registered trademarks of in various countries. Information in this document supersedes and replaces all information previously supplied. The logo is a registered trademark of Microelectronics. All other names are the property of their respective owners. 0 Microelectronics - All rights reserved Microelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America Doc ID 0 Rev /
Obsolete Product(s) - Obsolete Product(s)
Features W flyback SMPS demonstration board for alarm system based on the L99 and STPNKZ Input voltage: Vin: Vac (f: Hz) Output voltages: Vout =. V, Iout = A Vout = V, Iout= ma Vout =. V, Iout = ma (.9
AN922 Application note
Application note Using a Super Cap to back up the M41T56, M41T00 M41T11, M41T81, M41T94, and M41ST84W (16-pin) Introduction The M41T56, M41T00, M41T11, M41T81, M41T94, and M41ST84W (16-pin) real-time clocks
AN2970 Application note
Application note Principles of capacitive touch and proximity sensing technology The objective of this document is to present the principles of capacitive sensing and charge transfer used in STMicroelectronics
STTH60R04. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes
STTH6R4 Ultrafast recovery diode Main product characteristics I F(AV) 6 A V RRM T j 4 V 175 C A K V F (typ).95 V t rr (typ) 31 ns Features and benefits Very low switching losses High frequency and/or high
STTH61R04TV. Ultrafast recovery diode. Main product characteristics. Features and benefits. Order codes. Description A1 K2 ISOTOP ISOTOP STTH61R04TV1
STTH61R4TV Ultrafast recovery diode Main product characteristics I F(AV) 2 x 3 A V RRM 4 V T j V F (typ) 15 C.95 V t rr (typ) 24 ns Features and benefits Ultrafast Very low switching losses High frequency
LD29300xx. 3 A, very low drop voltage regulators. Features. Description
3 A, very low drop voltage regulators Features Very low dropout voltage (Typ. 0.4 at 3 A) Guaranteed output current up to 3 A Fixed voltage with ± 1 % tolerance at 25 C Internal current and thermal limit
Order codes Part numbers DPAK (tape and reel) PPAK (tape and reel)
800 ma fixed and adjustable output very low drop voltage regulator Features ery low dropout voltage (typ. 0.4 at 800 ma) Guaranteed output current up to 800 ma Fixed and adjustable output voltage (± 1
STTH16R04CT. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes TO-220AB TO-220FPAB
Ultrafast recovery diode Main product characteristics I F(AV) 2 X 8 A A1 A2 K V RRM 4 V T j 175 C V F (typ) t rr (typ).9 V 25 ns A1 K A2 A1 A2 K Features and benefits TO-22AB T TO-22FPAB FP Very low switching
High brightness RGB LED array driver with local dimming and diagnostics based on the LED1642GW and STM32
STEVAL-ILL0V High brightness RGB D array driver with local dimming and diagnostics based on the DGW and STM Data brief Features High brightness x RGB D matrix Complete hardware and software package Various
STM1831. Voltage detector with sense input and external delay capacitor. Features. Applications
Voltage detector with sense input and external delay capacitor Features Voltage monitored on separate sense input V SEN Factory-trimmed voltage thresholds in 100 mv increments from 1.6 V to 5.7 V ±2% voltage
T810H. High temperature 8 A sensitive TRIACs. Features. Applications. Description. Medium current TRIAC
T8H High temperature 8 A sensitive TRIACs Features Medium current TRIAC Logic level sensitive TRIAC 5 C max. T j turn-off commutation G Clip bounding A RoHS (22/95/EC) compliant packages Applications The
STTH6110TV. Ultrafast recovery - high voltage diode. Main product characteristics. Features and benefits. Order codes. Description ISOTOP ISOTOP
Ultrafast recovery - high voltage diode Main product characteristics I F(AV) V RRM T j V F (typ) t rr (typ) Features and benefits Ultrafast, soft recovery Very low conduction and switching losses High
DO-15 DO-201AD STTH3R04Q STTH3R04
STTH3R4 Ultrafast recovery diode Features Negligible switching losses Low forward and reverse recovery times High junction temperature Description The STTH3R4 series uses ST's new 4 V planar Pt doping
STTH6006W. Turbo 2 ultrafast - high voltage rectifier. Features and benefits. Description. Main product characteristics
Turbo 2 ultrafast - high voltage rectifier Table 1. Main product characteristics I (AV) 6 A A K V RRM 6 V T j 175 C V (typ) 1.1 V t rr (max) 6 ns A eatures and benefits Ultrafast switching Low reverse
L78LxxAB L78LxxAC - L78LxxC
L78LxxAB L78LxxAC - L78LxxC Positive voltage regulators Features Output current up to 100 s of 3.3; 5; 6; 8; 9; 10; 12; 15; 18; 24 Thermal overload protection Short circuit protection No external components
AN420 Application note
Application note Expanding A/D resolution of the ST6 A/D converter Introduction Occasionally the analog signal provided by external sensors require an Analog to Digital conversion with a resolution of
STEVAL-IDP003V1. IO-Link industrial modular sensor board based on L6362A. Description. Features
STEVAL-IDP00V IO-Link industrial modular sensor board based on LA Data brief Features Main supply voltage: V maximum STML0CZ microcontroller IO-Link PHY using the LA device for data communication with
STTH312B. Ultrafast recovery V diode. Main product characteristics. Features and benefits. Description. Order codes
STTH31 Ultrafast recovery - 1 V diode Main product characteristics I (AV) 3 A V RRM 1 V T j 175 C V (typ) 1.15 V t rr (typ) 55 ns K A K eatures and benefits Ultrafast, soft recovery Very low conduction
STTH15L06. Turbo 2 ultrafast high voltage rectifier. Description. Features
STTH15L6 Turbo 2 ultrafast high voltage rectifier Datasheet - production data Description K A K A The STTH15L6, which is using ST Turbo 2 6 V technology, is specially suited for use in switching power
STEVAL-CCA021V1. USB audio demonstration board based on the STM32F103RE and TS4657. Features. Description
STEVAL-CCA0V USB audio demonstration board based on the STMF0RE and TS Data brief Features STMF0RE performance line microcontroller Mz crystal unit USB connector and ESD protection Two LEDs driven by the
STPS20M60S. Power Schottky rectifier. Features. Description. High current capability Avalanche rated Low forward voltage drop High frequency operation
Power Schottky rectifier Features High current capability valanche rated Low forward voltage drop High frequency operation Description The is a single Schottky diode, suited for high frequency switch mode
AN1755 APPLICATION NOTE
AN1755 APPLICATION NOTE A HIGH RESOLUTION / PRECISION THERMOMETER USING ST7 AND NE555 INTRODUCTION The goal of this application note is to present a realistic example of a thermometer using an ST7 and
STTH3002. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes K DOP3I STTH3002PI DO-247 STTH3002W
Ultrafast recovery diode Main product characteristics I F(V) 3 K V RRM 2 V T j (max) 175 C V F (typ).77 V t rr (typ) 22 ns Features and benefits Very low conduction losses Negligible switching losses K
Symbol Parameter Value Unit V RRM Repetitive peak reverse voltage 150 V I F(RMS) RMS forward voltage 15 A
Power Schottky rectifier Main product characteristics I F(AV) V RRM j (max) V F (max) 3 A 15 V 175 C.67 V Description 15 V Power Schottky rectifier are suited for switch mode power supplies on up to 24
Order code Marking Package Packaging. STGB30V60DF GB30V60DF D²PAK Tape & reel STGP30V60DF GP30V60DF TO-220 Tube
STGB30V60DF STGP30V60DF 600 V, 30 A very high speed trench gate fieldstop IGBT Datasheet preliminary data Features Maximum junction temperature : T J = 175 C Very high speed switching Negligible tail current
ESDAULC5-1BF4. Low clamping and ultra low capacitance single line bidirectional ESD protection. Applications. Description.
Low clamping and ultra low capacitance single line bidirectional ESD protection Applications Datasheet - production data Where transient over voltage protection in ESD sensitive equipment is required,
Smart home lighting based on HVLED815PF and SPSGRF. Description
STEVAL-ILL0V Smart home lighting based on HVLEDPF and SPSGRF Data brief Description The STEVAL-ILL0V evaluation board is an offline LED driver based on the HVLEDPF, coupled with Sub-GHz connectivity based
STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board. Description
STEVALSPIN0 STSPINF0A advanced phase BLDC driver with embedded STM MCU single shunt evaluation board Data brief Applications Smart manufacturing equipment Battery powered home appliances and pumps Fans
STTH12R06. Turbo 2 ultrafast high voltage rectifier. Features. Description
STTH12R6 Turbo 2 ultrafast high voltage rectifier eatures Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching losses Package insulation voltage: TO22C ins: 25 V RMS
STPS60L30C-Y. Automotive power Schottky rectifier. Features. Description
Automotive power Shottky retifier Features ery small ondution losses Negligible swithing losses Extremely fast swithing AEC-Q11 qualified A1 A2 Desription Pin 1 6 A dual enter tab Shottky retifier suitable
STEVAL-IME002V2. Single-lead electrocardiogram (ECG) and body impedance evaluation board. Description. Features
STEVAL-IMEV Single-lead electrocardiogram (ECG) and body impedance evaluation board Description Data brief Features Provides full access to all HMD features through a graphical user interface (GUI) Utilizes
16 channel LED driver expansion board based on LED1642GW for STM32 Nucleo. Description
channel D driver expansion board based on DGW for STM Nucleo Data brief Error detection Open D Shorted D Thermal shutdown Compatible with STM Nucleo board Equipped with Arduino UNO R connector RoHS compliant
STPS1545. Power Schottky rectifier. Main product characteristics. Features and Benefits. Description 15 A 45 V
Power Schottky rectifier Main product characteristics I F(V) V RRM T j (max) V F (max) Features and Benefits Very small conduction losses Negligible switching losses Extremely fast switching Insulated
KD A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED
7.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V,1.8V, 2.5V, 3.0, 3.3V OUTPUT CURRENT UP TO 7.5A 1.4V MAX DROPOUT VOLTAGE AT FULL LOAD
STEVAL-IDP004V1. IO-Link master multi-port evaluation board based on L6360. Description. Features
STEVAIDP00V IO-Link master multi-port evaluation board based on L0 Data brief Features Main supply voltage V maximum L0 IO-Link master device RS- serial interface CAN serial interface USB interface DC/DC
STTH5L06RL. Turbo 2 ultrafast high voltage rectifier. Main product characteristics. Features and benefits. Order codes.
STTH5L6 Turbo 2 ultrafast high voltage rectifier Main product characteristics K I (V) 5 V RRM 6 V I R (max) 125 µ / 15 µ T j (max) 175 C V (max) 1.5 V K TO-22C STTH5L6D K TO-22PC STTH5L6P t rr (max) 95
STEVAL-FCU001V1. Flight controller unit evaluation board for toy drones. Description. Features
STEVAL-FCU00V Flight controller unit evaluation board for toy drones Data brief STLNLLH - N-channel 0 V, A STripFET H Power MOSFET STC0-00 ma Standalone linear Li-Ion battery charger RoHS compliant Features
STTH1210G. Ultrafast recovery - high voltage diode. Main product characteristics. Features and benefits. Description. Order codes K TO-220AC STTH1210D
STTH12 Ultrafast recovery - high voltage diode Main product characteristics I F(V) 12 K V RRM V T j 175 C V F (typ) 1.3 V t rr (typ) 48 ns Features and benefits Ultrafast, soft recovery Very low conduction
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE: 1.2
K G. Order code 400 V 600 V Min. Max. P0111MA 1AA3 X 4 µa 25 µa TO-92. P0111MN 5AA4 X 4 µa 25 µa SOT-223. P0115DA 5AL3 X 15 µa 50 µa TO-92
Sensitive high immunity SCRs up to.8 Features I T(RMS) up to.8 V DRM /V RRM and 6 V I GT from.5 to 5 µ G K Description Thanks to highly sensitive triggering levels, the P11xx SCR series is suitable for
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. L7900 SERIES NEGATIVE VOLTAGE REGULATORS OUTPUT CURRENT UP TO 1.5A OUTPUT
16 channel LED driver expansion board based on LED1642GW for STM32 Nucleo. Description
X-NUCO-DA channel D driver expansion board based on DGW for STM Nucleo Data brief Error detection Open D Shorted D Thermal shutdown Compatible with STM Nucleo board Equipped with Arduino UNO R connector
TDA7439DS. Three-band digitally-controlled audio processor. Features. Description
Three-band digitally-controlled audio processor Features! Input multiplexer four stereo inputs selectable input gain for optimal adaptation to different sources! Single stereo output! Treble, mid-range
STTH6004W. Ultrafast high voltage rectifier. Table 1: Main product characteristics I F(AV) 60 A V RRM. 400 V T j (max) 175 C V F (typ)
STTH64W Ultrafast high voltage rectifier Table 1: Main product characteristics I F(AV) 6 A V RRM 4 V T j (max) 175 C V F (typ).83 V t rr (max) 5 ns Features and benefits Ultrafast switching Low reverse
STPS1L40M LOW DROP POWER SCHOTTKY RECTIFIER. Table 1: Main Product Characteristics I F(AV) V RRM. 1 A 40 V T j (max) 150 C V F (max) 0.
LOW DROP POWER SCHOTTKY RECTIFIER Table 1: Main Product Characteristics I F(AV) V RRM 1 A 40 V T j (max) 150 C V F (max) 0 V C A FEATURES AND BENEFITS Very small conduction losses Negligible switching
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS LOW DROPOUT VOLTAGE (1.15V TYP. @ I OUT = 1A, 25 C) VERY LOW QUIESCENT CURRENT (5 ma TYP. @ 25 C) OUTPUT CURRENT UP TO 1A FIXED
Obsolete Product(s) - Obsolete Product(s)
8-BIT PRIORITY ENCODER CONVERTS FROM 1 TO 8 TO INPUTS BINARY PROVIDES CASCADING FEATURE TO HANDLE ANY NUMBER OF INPUTS GROUP SELECT INDICATES ONE OR MORE PRIORITY INPUTS QUIESCENT CURRENT SPECIFIED UP
74VHCT138ATTR 3 TO 8 LINE DECODER (INVERTING)
3 TO 8 LINE DECODER (INVERTING) HIGH SPEED: t PD = 7.6 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.), V IL = 0.8V (MAX) POWER
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. STTH112/A/U HIGH VOLTAGE ULTRAFAST RECTIFIER Main product characteristics
STEVAL-ISB044V1. Data brief. Features. Description
STEVAL-ISB0V Data brief Qi MP-A0 W wireless charger TX evaluation kit based on STWBC-EP Features STWBC-EP digital controller W output power Qi MP-A0 reference design WPC Qi.. standard compliant Robust
Obsolete Product(s) - Obsolete Product(s)
STTH124TV1 Ultrafast high voltage rectifier Table 1: Main product characteristics I F(AV) 2 x 6 A V RRM 4 V T j (max) 15 C V F (typ) t rr (max) Features and benefits Ultrafast switching Low reverse current
AN2044 APPLICATION NOTE
AN2044 APPLICATION NOTE OPERATING PRINCIPALS FOR PRACTISPIN STEPPER MOTOR MOTION CONTROL 1 REQUIREMENTS In operating a stepper motor system one of the most common requirements will be to execute a relative
7.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED. October 2002
THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V,1.8V, 2.5V, 3.0, 3.3V OUTPUT CURRENT UP TO 7.5A 1.4V MAX DROPOUT VOLTAGE AT FULL LOAD LINE REGULATION: MAX 0.2% OVER FULL TEMPERATURE RANGE LOAD REGULATION:
Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP
STEVAL-ISB0V Qi MP-A0 W wireless charger TX evaluation kit based on STWBC-EP Data brief WPC Qi.. standard compliant Robust demodulation algorithm, with triple path (V, I, f) Foreign object detection (FOD)
BAR42FILM BAR43FILM SMALL SIGNAL SCHOTTKY DIODE. Table 1: Main Product Characteristics I F(AV) 0.1 A V RRM. 30 V T j 150 C 0.33 and 0.
BR42FILM BR43FILM SMLL SIGNL SCHOTTY DIODE Table 1: Main Product Characteristics I F(V) 0.1 V RRM 30 V T j 150 C V F (max) 0.33 and 0.40 V FETURES ND BENEFITS Very small conduction losses Negligible switching
L7800 SERIES POSITIVE VOLTAGE REGULATORS
L7800 SERIES POSITIVE VOLTAGE REGULATORS OUTPUT CURRENT TO 1.5A OUTPUT VOLTAGES OF 5; 5.2; 6; 8; 8.5; 9; 10; 12; 15; 18; 24V THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSITION SOA PROTECTION
ST2378E. 8-bit dual supply 1.71V to 5.5V level translator with I/O V CC ± 15KV ESD protection. General features. Description.
8-bit dual supply 1.71V to V level tralator with I/O V CC ± 15KV ESD protection General features High speed: t PD = 15 (Max.) at T A = 85 C V L = 1.8V V CC = V Guaranteed data rate: 13Mbps (1.8V V L V
Obsolete Product(s) - Obsolete Product(s)
Three-band digitally-controlled audio processor Features! Input multiplexer four stereo inputs selectable input gain for optimal adaptation to different sources! Single stereo output! Treble, mid-range
STEVAL-CCM007V2. STM32-based NAND Flash driver demonstration board (with TFT MB785/P) Description. Features
TL-M TM-based lash driver demonstration board (with TT M) escription ata brief TL-M The TL-M is a demonstration board for a lash driver based on the TMZT microcontroller. t supports byte and kilobyte page
65 V, 100 ma NPN/PNP general-purpose transistor. Table 1. Product overview Type number Package NPN/NPN PNP/PNP Nexperia JEITA
Rev. 1 17 July 29 Product data sheet 1. Product profile 1.1 General description NPN/PNP general-purpose transistor pair in a very small Surface-Mounted Device (SMD) plastic package. Table 1. Product overview
Very low conduction losses Low forward voltage drop Low thermal resistance High specified avalanche capability High integration ECOPACK 2 compliant
Datasheet 100 V, 30 A power Schottky rectifier Features Very low conduction losses Low forward voltage drop Low thermal resistance High specified avalanche capability High integration ECOPACK 2 compliant
BCM857BV; BCM857BS; BCM857DS
BCM857BV; BCM857BS; BCM857DS Rev. 05 27 June 2006 Product data sheet 1. Product profile 1.1 General description in small Surface-Mounted Device (SMD) plastic packages. The transistors are fully isolated
HCF4532B 8-BIT PRIORITY ENCODER
8-BIT PRIORITY ENCODER CONVERTS FROM 1 TO 8 TO INPUTS BINARY PROVIDES CASCADING FEATURE TO HANDLE ANY NUMBER OF INPUTS GROUP SELECT INDICATES ONE OR MORE PRIORITY INPUTS QUIESCENT CURRENT SPECIFIED UP
USB Power Delivery (Type-C PD) 45 W USB wall power adapter solution based on STCH02 and STUSB4700
STEVL-USBPDH USB Power Delivery (Type-C PD) W USB wall power adapter solution based on STCH0 and STUSB00 Data brief Features USB wall power adapter input: VC to VC USB voltage output: V, V and V Current
STPS30SM100S. Power Schottky rectifier. Features. Description
Power Schottky rectifier Features High current capability valanche rated Low forward voltage drop current High frequency operation Insulated package: Insulation voltage 2000 V rms Package capacitance =
STEVAL-ILL015V3. HB LED driver with diagnostic based on the LED2472G. Description. Features
STEVAL-ILL0V H LED driver with diagnostic based on the LED Description Data brief The STEVAL-ILL0V evaluation board provides a platform to test and evaluate STMicroelectronics LED LED driver. The LED device
N-channel enhancement mode Field-Effect Transistor (FET) in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package using
Rev. 24 March 29 Product data sheet. Product profile. General description N-channel enhancement mode Field-Effect Transistor (FET) in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package
STTH212RL. High voltage ultrafast diode. Main product characteristics. Features and benefits. Order codes. Description DO-201AD STTH212
High voltage ultrafast diode Main product characteristics I F(AV) 2 A A K V RRM 12 V T j 175 C V F (typ) 1. V t rr (max) Features and benefits Low forward voltage drop High reliability High surge current
STPSC15H V power Schottky silicon carbide diode. Datasheet. Features A. Description. No or negligible reverse recovery
Datasheet 1200 V power Schottky silicon carbide diode Features A K No or negligible reverse recovery K K Switching behavior independent of temperature Robust high voltage periphery Operating from -40 C
EVLSTNRG-1KW. 1 kw SMPS digitally controlled multiphase interleaved converter using STNRG388A. Description. Features
EVLSTNRG-KW kw SMPS digitally controlled multiphase interleaved converter using STNRGA Description Data brief Features Digital controller: STNRGA -phase interleaved DC/DC architecture Full load power:
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
60 V, 0.3 A N-channel Trench MOSFET
Rev. 01 11 September 2009 Product data sheet 1. Product profile 1.1 General description ESD protected N-channel enhancement mode Field-Effect Transistor (FET) in a small SOT2 (TO-26AB) Surface-Mounted
Dual N-channel field-effect transistor. Two N-channel symmetrical junction field-effect transistors in a SOT363 package.
Rev. 2 15 September 211 Product data sheet 1. Product profile 1.1 General description Two N-channel symmetrical junction field-effect transistors in a SOT363 package. CAUTION This device is sensitive to
BSH Description. 2. Features. 3. Applications. 4. Pinning information. N-channel enhancement mode field-effect transistor
M3D88 Rev. 25 August 2 Product specification. Description in a plastic package using TrenchMOS technology. Product availability: in SOT23. 2. Features TrenchMOS technology Very fast switching Logic level
BTA12, BTB12 and T12 Series
BTA12, BTB12 and T12 Series SNUBBERLESS, LOIC LEVEL & STANDARD 12A TRIACS Table 1: Main Features Symbol Value Unit I T(RMS) 12 A V DRM /V RRM 6 and 8 V I T (Q1 ) 5 to 5 ma A1 DESCRIPTION Available either
Table 3: Absolute Ratings (limiting values) Symbol Parameter Value Unit I T(RMS)
TYN61M 1 SCR Table 1: Main Features Symbol Value Unit I T(RMS) 1 V DRM /V RRM 6 V I T (min./max.) 1.5 / 5 m K DESCRIPTION The TYN61M SCR is suitable to fit modes of control found in applications such as
TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER
TURBO 2 ULTRAAST HIGH VOLTAGE RECTIIER Table 1: Main Product Characteristics I (AV) Up to 2 x A V RRM 6 V T j 175 C V (typ).95 V t rr (max) 55 ns EATURES AND BENEITS Ultrafast switching Low reverse current
STD5N20L N-CHANNEL 200V Ω - 5A DPAK STripFET MOSFET
N-CHANNEL 200V - 0.65Ω - 5A DPAK STripFET MOSFET Table 1: General Features TYPE V DSS R DS(on) I D Pw Figure 1: Package STD5N20L 200 V < 0.7 Ω 5 A 33 W TYPICAL R DS (on) = 0.65 Ω @ 5V CONDUCTION LOSSES
AN10249 SC16C752/SC16C752B/ SC16C2550/SC16C2550B ISA bus hardware interface example
INTEGRATED CIRCUITS ABSTRACT This application note shows how a SCC (or SCCB) or a SCC0 (or SCC0B) can be connected to an ISA bus. This application note is also applicable to all Philips SCC products. AN0
STTH10R04. High efficiency rectifier. Description. Features
STTH1R4 High efficiency rectifier Datasheet - production data Features K A A NC D 2 PAK K Ultrafast recovery Low power losses High surge capability Low leakage current High junction temperature ECOPACK
ULTRAFAST RECTIFIER PDP ENERGY RECOVERY
ULTRST RECTIIER PP ENERGY RECOVERY Table 1: Main Product Characteristics I (V) V RRM V P (typ) I RM (typ) 6 3 V 2.5 V 6 T j 175 C V (typ).9 V K ETURES N BENEITS Ultrafast recovery allowing High Sustain
Low Pressure Sensor Amplified Analog Output SM6295-BCM-S
Low Pressure Sensor Amplified Analog Output SM6295-BCM-S-040-000 FEATURES Pressure range from 0 to 40 cmh 2 O 5.0 V operation Amplified analog output (10 to 90%Vdd) Compensated temperature range: 0 to
Silicon carbide Power MOSFET 650 V, 90 A, 18 mω (typ., T J = 25 C) in an H²PAK-7 package. Order code V DS R DS(on) max. I D
Datasheet Silicon carbide Power MOSFET 650 V, 90 A, 18 mω (typ., T J = 25 C) in an H²PAK-7 package TAB Features Order code V DS R DS(on) max. I D 1 H2PAK-7 7 SCTH90N65G2V-7 650 V 25 mω 90 A Very high operating
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS LOW DROPOUT VOLTAGE (1.15V TYP. @ I OUT =1A,25 C) VERY LOW QUIESCENT CURRENT (5 ma TYP. @ 25 C) OUTPUT CURRENT UP TO 1A FIXED OUTPUT
RF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
STTH60SW03C. Turbo 2 ultrafast high voltage rectifier. Description. Features
STTH6SW3C Turbo 2 ultrafast high voltage rectifier A1 A2 K Description Datasheet production data The STTH6SW3C uses ST Turbo 2 3 V technology. It is especially suited to be used for DC/DC and DC/AC converters
ST3L01 TRIPLE VOLTAGE REGULATOR
TRIPLE VOLTAGE REGULATOR DUAL INPUT VOLTAGE (12V AND 5V) TRIPLE OUTPUT VOLTAGE (2.6V, 3.3V, 8V) 2.6V GUARANTEED I OUT UP TO 1.2A 3.3V GUARANTEED I OUT UP TO 1.0A 8V GUARANTEED I OUT UP TO 200mA THERMAL
ULTRAFAST RECTIFIER PDP ENERGY RECOVERY
STTH40P03S ULTRST RECTIIER PDP ENERGY RECOVERY Table 1: Main Product Characteristics I (V) 40 V RRM 300 V V P (typ) 2.5 V I RM (typ) 5 T j 175 C V (typ) 0.9 V ETURES ND BENEITS Ultrafast recovery allowing
STPS1045B. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet production data Description High voltage Schottky rectifier suited for switch mode power supply and other power converters. Packaged in DPAK, this device is intended
L7800AB/AC SERIES PRECISION 1A REGULATORS
L7800AB/AC SERIES PRECISION 1A REGULATORS OUTPUT CURRENT IN EXCESS OF 1A OUTPUT VOLTAGES OF 5; 6; 8; 9; 12; 15; 18; 20; 24V THERMAL OVERLOAD PROTECTION OUTPUT TRANSITION SOA PROTECTION 2% OUTPUT VOLTAGE
Through Hole Transformers, Pulse, Trigger Type
Through Hole Transformers, Pulse, Trigger Type STANDARD ELECTRICAL SPECIFICATIONS PRIMARY IND. MIN. (mh) PRIMARY DCR MAX. ( ) Notes () Hipot voltage will meet international safety standards () Low profile
Obsolete Product(s) - Obsolete Product(s)
DUAL BINARY TO 1 OF 4 DECODER/DEMULTIPLEXER OUTPUT LOW ON SELECT EXPANDABLE WITH MULTIPLE PACKAGES STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V
HCF4555B DUAL BINARY TO 1 OF 4 DECODER/DEMULTIPLEXER OUTPUT HIGH ON SELECT
DUAL BINARY TO 1 OF 4 DECODER/DEMULTIPLEXER OUTPUT HIGH ON SELECT EXPANDABLE WITH MULTIPLE PACKAGES STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V
PC Card (PCMCIA) Interface Switch
End of Life. Last Available Purchase Date is 3-Dec-204 Si9706DY PC Card (PCMCIA) Interface Switch FEATURES Single SO-8 Package CMOS-Logic Compatible Inputs Slow V CC Ramp Time Smart Switching Extremely
BF556A; BF556B; BF556C
SOT23 Rev. 4 5 September 2 Product data sheet. Product profile. General description N-channel symmetrical silicon junction field-effect transistors in a SOT23 package. CAUTION This device is sensitive
NPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device (SMD) plastic package.
Rev. 03 11 December 2009 Product data sheet 1. Product profile 1.1 General description NPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device
SD2902. RF POWER TRANSISTORS HF/VHF/UHF N-CHANNEL MOSFETs
SD292 RF POWER TRANSISTORS HF/VHF/UHF N-CHANNEL MOSFETs GOLD METALLIZATION COMMON SOURCE CONFIGURATION 2 - MHz WATTS 28 VOLTS 12. db MIN. AT 4 MHz CLASS A OR AB OPERATION EXCELLENT THERMAL STABILITY DESCRIPTION
M74HCT138TTR 3 TO 8 LINE DECODER (INVERTING)
3 TO 8 LINE DECODER (INVERTING) HIGH SPEED: t PD = 16ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) SYMMETRICAL
OEM Silicon Pressure Die
OEM Silicon Pressure Die SM9520 Series FEATURES High volume, cost effective Gauge configuration Constant current or constant voltage drive Millivolt output Available in 0.15, 0.60 & 1.50 PSIG full-scale
Obsolete Product(s) - Obsolete Product(s)
8-INPUT NAND GATE HIGH SPEED: t PD = 13ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: I