CS ProtoBox. Available 15 Sept 2014 at the Stores shop.

Transcription

1 CS ProtoBox Available Sept 0 at the Stores shop.

2 The content of the CS Protobox is similar to the Create Protobox. The Arduino Uno, USB A B cable, DC Motor, Battery and Clip are replaced by a USB Power supply, micro Usb cable, Ethernet Cable, GB SD card, CS ProtoBoard, 0pin flatcable. Due to the lack of an ADC on the Raspberry Pi, a dual channel bit ADC is included (MCP0). See for details about the specific components. The box does not contain a Raspberry Pi model B, you need to purchase this separately.

3 SD card requirements The included SD card is not yet formatted with the NOOBS image. You can find the required info to format and load it with the NOOBS files here : setup/ Backing up your SD card After installing an OS on the SD card, your card will contain linux partitions. To backup or restore the full content of the SD card use disk image tool like dd (linux) or Win Disk Imager (windows) Starting the first time See the following site for starting your Pi for the first time.. start guide/ CS OS Assignments The actual assignments for CS OS students are located here : OS/Lecture_Assignments.pdf Connecting signals to your Raspberry Pi / Breadboard. Keep in mind that your Raspberry Pi works with a low voltage signal. Applying a higher voltage than. Volt can destroy your Pi.. See the next pages for hooking up the CS ProtoBoard to your Raspberry Pi.

4 Combining the Raspberry Pi model B and the CS Protoboard.. Check if the additional stack connectors and spacers are fitted correctly. Align the CS proto board on top of the Raspberry Pi. Apply a little force that allows the connectors to mate.

5 . Fix the two boards together with two M screws on the bottom side of the Pi. Be care full not to scratch/damage the Pi board with your screwdriver!. Fix the breadboard on top of the CS Protoboard.

6 D C Pin Pin0 GPIO GPIO Raspberry Pi I/O RP_VCC+V RP_VCC+V0 wiringpi BCM J BCM wiringpi Pin Pin Pin GPIO GPIO GPIO SDA SCL GPIO_GCLK TXD0 GPIO Pin 0 RXD0 GPIO Pin Pin0 GPIO GPIO_GEN0 GPIO_GEN GPIO Pin Pin Pin Pin Pin GPIO GPIO GPIO0 GPIO GPIO_GEN GPIO_GEN SPI_MOSI SPI_MISO 0 GPIO_GEN GPIO_GEN GPIO_GEN GPIO GPIO GPIO Pin Pin Pin Pin GPIO SPI_SCLK SPI_CE0_N GPIO Pin0 SPI_CE_N GPIO Pin RP_VCC+V GPIO_GEN GPIO_GEN0 CONA J CONA RP_VCC+V0 GPIO_GEN GPIO_GEN GPIO GPIO0 Pin Pin Breadboard Connection RP_VCC+V0 RP_VCC+V TXD0 RXD0 SDA SCL GPIO_GCLK GPIO_GEN0 GPIO_GEN GPIO_GEN GPIO_GEN GPIO_GEN GPIO_GEN GPIO_GEN SPI_MOSI SPI_MISO SPI_SCLK SPI_CE0_N SPI_CE_N 0 J CON J CON0 J BCM wiringpi GPIO Pin GPIO Pin GPIO Pin GPIO Pin GPIO Pin GPIO Pin0 GPIO Pin GPIO Pin GPIO Pin GPIO Pin GPIO Pin GPIO Pin GPIO0 GPIO GPIO GPIO GPIO Pin Pin Pin Pin0 Pin DE-SOC D0 D D D D D D0 D D D D D D D D D D DE-SOC D D D0 D D D D D D D Breadboard Connection J CON J CON TA_VCC+V TA_VCC+V0 D D D0 D D D D D D D GPIO_D0 GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D0 GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D0 GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D0 GPIO_D GPIO_D Fpga Soc I/O TA_VCC+V0 J TA_VCC+V GPIO protection TXD0 RXD0 SDA SCL CON0A R R R R GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D0 GPIO_D GPIO_D GPIO_D D C GPIO_GEN GPIO_GEN GPIO_GEN GPIO_GEN0 CON J0 CON GPIO GPIO GPIO0 GPIO Pin Pin Pin Pin0 D D D D GPIO_GCLK GPIO_GEN GPIO_GEN GPIO_GEN GPIO_GEN0 GPIO_GEN0 GPIO_GEN GPIO_GEN R R R R R R0 R R GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D0 GPIO_D J CON J CON Experimental Area J CON J CON GPIO_GEN GPIO_GEN GPIO_GEN GPIO_GEN R R R R GPIO_D GPIO_D GPIO_D GPIO_D B Supply Raspberry from FpgaSoc RP_VCC+V0 TA_VCC+V0 J HOLE J CON 0 J CON 0 J CON 0 J0 CON 0 Ground Help SPI_MOSI SPI_MISO SPI_SCLK R R R R0 R R R R GPIO_D GPIO_D GPIO_D GPIO_D GPIO_D0 GPIO_D GPIO_D GPIO_D B JP Power J HOLE J CON 0 J CON 0 J CON 0 J CON 0 SPI_CE0_N SPI_CE_N D D R R R R GPIO_D GPIO_D GPIO_D GPIO_D D D D D R R0 R R GPIO_D GPIO_D GPIO_D GPIO_D J CON J CON J CON J CON D D D0 D R R R R GPIO_D GPIO_D GPIO_D0 GPIO_D A A J CON J0 CON J CON Title Module ProtoBoard Size Document Number Rev A PiProtoboard 0 Date: Monday, October, 0 Sheet of

7 Appendix B : CS Protoboard PCB Layout Top Side (silkscreen) Top Side (Copper)

8 Bottom Side (Silkscreen) Bottom Side (Copper)