SINGLE TURN CERMET TRIMMERS

Size: px
Start display at page:

Download "SINGLE TURN CERMET TRIMMERS"

Transcription

1 SINGLE TURN INTERNAL STRUCTURE 4 5! FEATURES Lead-free soldering, Cadmium-free Various configurations to choose from Wide variety (4 types) O ring sealed and washable !0 Part name Housing Rotor Wiper Rubber cushion O ring Resistive element Terminal pin Adhesive Base element Electrode Sn-Pb Sn Material PBT Polybutyleneterephthalate Multi metal alloy Silicone rubber Silicone rubber RuO cermet Copper alloy, Solder-plated Copper alloy, Tin-plated Epoxy Ceramic Ag-Pd cermet Flammability UL-94V-0 CFCs (PBBOs, PBBs) CFCs, Halon, Carbon tetrachloride and designated bromic flame retardant PBBOs and PBBs are not used in our products. UL-94HB UL-94V-0 PART NUMBER DESIGNATION C T - 6 T V 5 k Ω ( 5 0 ) Series name Resistance code Terminal pin Blank Sn-Pb E Sn (Lead-free) Form of packaging T Taping (Ammo pack type) M Magazine (stick) BlankBulk in vinyl bags Product shape Resistance value P S W X R H V N F Rear adjustment Please refer to the LIST OF PART NUMBERS when placing orders.

2 LIST OF PART NUMBERS Adjustment position Form of packaging Shape of terminal Taping Magazine (stick) Vinyl bag Remarks (Top view) Sn-Pb Sn (Lead-free) Sn-Pb Sn (Lead-free) Sn-Pb Sn (Lead-free) TP ETP Ammo pack Ammo pack type type MP EMP P EP The pin length of TP & MP is different from P. W EW A R A ER TV ETV Ammo pack Ammo pack type type V EV MS EMS S ES The pin length of MS is different from S. ( Adjustment direction) TH ETH Ammo pack Ammo pack type type X H EX EH The pin length of TH is different from H. N EN Rear adjustment A F A EF Pieces in package 000 pcs./taping 5 pcs./stick 50 pcs./pack Not manufactured A The products indicated by A mark are manufactured upon receipt of order basis. Fig. Nominal resistance values Fig. A 0 Ω A 0 Ω 50 Ω 00 Ω 00 Ω 500 Ω kω kω 5 kω 0 kω 0 kω 50 kω 00 kω 00 kω 500 kω MΩ MΩ The above part numbers are all available with the respective combination of <Nominal resistance values> (Fig. ). Verify the above part numbers when placing orders. Taping and magazine specifications are not sold separately and must be purchased in taping or stick units.

3 ELECTRICAL CHARACTERISTICS Nominal resistance range Nominal resistance tolerance Power ratings Resistance law Maximum input voltage Maximum wiper current Effective electrical angle End resistance C.R.V. Operating temp. range Temp. coefficient Insulation resistance Dielectric strength Net weight Nominal resistance values (Ω) 0 Ω ~ MΩ ± 0 % 0.5 W (0 C) 0 W (0 C) Linear law DC00 V or power rating, whichever is smaller 00 ma or power rating, whichever is smaller 0 ( turn) Ω % or Ω, whichever is greater Ω % or Ω, whichever is greater 55 ~ 0 C 0 Ω ~ 0 Ω : ± / C maximum 50 Ω ~ MΩ : ± / C maximum 000 MΩ minimum (DC500 V) AC900 V, 60 s Approx. 0.5 g (P, W, R, V, EP, EW, ER, EV) Approx g (S, X, H, N, ES, EX, EH, EN) Approx. 0.9 g (F, EF) Resistance code Mechanical angle Operating torque Stop strength Rotational life Teminal strength Thrust to rotor Solderability Test item Thermal shock Humidity Shock Vibration Load life Low temp. operation High temp. exposure Immersion seal Soldering heat MAXIMUM INPUT RATINGS Maximum input voltage (V) MECHANICAL CHARACTERISTICS Test conditions R/R S.S. Maximum wiper current (ma) 60 ( turn) ~ 0 mn m {0 ~ 04 gf cm} 50 mn m {50 gf cm} minimum 00 cycles [ R/R ± ( Ω+ %)] 0 N {.0 kgf} minimum Tensile strength 0 N {.0 kgf} minimum Sn-Pb 5 C, s Sn (Lead-free) 45 ± C, ~ s { } Reference only ENVIRONMENTAL CHARACTERISTICS 65 ~ 5 C (0.5 h), 5 cycles 0 ~ 65 C (80 ~ 98 %), 0 cycles, 40 h 98 m/s, 6 ms 6 directions for times each (Amplitude).5 mm or (Acceleration) 96 m/s, 0 ~ 000 Hz, directions, times each 0 C, 0.5 W, 000 h 55 C, h 0 C, 50 h 85 C, 60 s Sn-Pb 50 C, s Sn Flow ± C ~ Manual soldering 80 ± 0 C, ~ 4 s A A Specifications [ R/R %] [S.S. %] [ R/R %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] [ R/R %] [S.S. %] No leaks (No continuous bubbles) [ R/R %] Change in total resistance Setting stability k k k k k k k k k M M A The products indicated by A mark are manufactured upon receipt of order basis.

4 OUTLINE DIMENSIONS P, EP 60 Nom. 0.6 W.6 L.6 D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) 60 Nom. 0.6 W.6 L.6 D 5.8 ± 60 Nom. φ W.6 L.6 D Adjustment W, EW 0.6 W.6 L.6 D 5.8 ± φ V, EV Pin pitch in W type is different from P type. S, ES.5± 6± ±.5.5 φ 0.45

5 OUTLINE DIMENSIONS X, EX W.6 L.6 D Unless otherwise specified, tolerance: ± 0. (Unit: mm) Adjustment 0± φ H, EH 0.6 W.6 L.6 D Adjustment.5 ± 9.5± 8. φ N, EN 0.6 W.6 L.6 D Adjustment ±.5.5 φ 0.45 Terminals & position in N type is different from X type.

6 OUTLINE DIMENSIONS F, EF Rear adjustment 0.6 W.6 L.6 D Semi-standard products φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) φ R, ER Semi-standard products 0.6 W.6 L.6 D φ Nom max. 5.5± 0..6 Resistance code& 5.8 ±.5.5 PACKAGING SPECIFICATIONS <Taping packaging specifications> Taping version is packaged in 000 pcs. per reel. Orders will be accepted for units of 000 pcs., i.e., 000, 000, 000 pcs., etc. Taping version (ammo pack type) is boxed with one reel (000 pcs.). # terminal Direction of feed Direction of feed Ammo pack type Ammo Pack # terminal Package size: 0 mm 0 mm 45 mm The leader and end of the tape have an empty part of minimum 00 mm respectively. There are two tape outlets on the package for different terminal alignment directions, for which details refer to the sketch above. (e.g.) When the tape is fed from the right outlet marked, # terminal comes out first. Gross weight of the boxing version TV, ETV : Approx. 840 g TH, ETH : Approx. 90 g TP, ETP : Approx. 850 g

7 TV, ETV 60 Nom..± 0.6 W.6 L.6 D Unless otherwise specified, tolerance: ± 0. (Unit: mm) max. max. 4.8± 9± ±0.5 min. 0.5 max. 6±0.5 φ ±0.5.± ±0.0 4± TH, ETH 60 Nom..± W.6 L.6 D max. max..± 9±0.5 min. 0.5 max. 6± ±0.5 φ ±0.5.± ±0.0 4±

8 TP, ETP 60 Nom..± 0.6W.6L.6D Unless otherwise specified, tolerance: ± 0. (Unit: mm) max. max. 4.8± ±0.5.± ±0.0 <Magazine packaging specifications> Magazine is packaged 5 pcs. per stick. Orders will be accepted for units of 5 pcs. i.e., 50, 5 pcs., etc. Magazine is packed 000 pcs. sticks per box. <Typical> Plastic magazine length = 580 mm (Without rubber cap) ± ± min. 0.5 max. 6±0.5 8± φ 4±0. MP, EMP MS, EMS Plastic magazine type

9 MP, EMP 60 Nom. 0.6 W.6 L.6 D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm).5 MS, EMS W.6 L.6 D Adjustment φ <Vinyl bag packaging specifications> Unit of bulk in vinyl bag packaging is 50 pcs. per pack. Boxing of bulk in vinyl bags is performed with 00 pcs. (F, EF is 00 pcs.) per box. ADJUSTMENT TOOL, MODEL TA-64 Good for both minus and cross slot rotors / shafts. Recommended for use with the following copal trimmers. + bit Tip thickness.4 Tip 0.5± bit Tip thickness Tip 0.5±0.05 Recommended models + bit bit ST-4 FT-6 RJ-4 FT-6 RJ-6 TM- COPAL ELECTRONICS.. 0 φ Material : Polybutyleneterephthalate Note : Please do not use the tool for purposes other than adjustment of electronic components.

COPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION

COPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION SINGLE TURN INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment

More information

FT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant

FT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed (Washable: Refer to 68) Suitable for automatic insertion and automatic adjust

More information

SM-42/43 SURFACE MOUNT CERMET TRIMMERS COPAL ELECTRONICS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION.

SM-42/43 SURFACE MOUNT CERMET TRIMMERS COPAL ELECTRONICS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES Lead-free soldering, Cadmium-free Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available

More information

ST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION

ST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive

More information

SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant

SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant SURFCE MOUNT CERMET TRIMMERS RoHS compliant FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction (Washable) INTERNL

More information

SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant

SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction

More information

SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION

SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES 7 8 9 Part name Material Flammability Housing Polyphenylenesulphide UL9V- Base element Ceramic Electrode g-pd cermet Resistive

More information

SM-3/31 SURFACE MOUNT CERMET TRIMMERS. S M - 3 T W 1 k ( ) FEATURES PART NUMBER DESIGNATION

SM-3/31 SURFACE MOUNT CERMET TRIMMERS. S M - 3 T W 1 k ( ) FEATURES PART NUMBER DESIGNATION SURFCE MOUNT CERMET TRIMMERS SM-/ RoHS compliant INTERNL STRUCTURE 6 9 8 7 FETURES 6 7 8 9 Part name Housing Base element Electrode Resistive element dhesive Wiper Terminal pin Rotor gear Shaft Material

More information

C V S T B T 1 0 ( )

C V S T B T 1 0 ( ) SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material

More information

Base S C T B

Base S C T B OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect

More information

CFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B

CFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B CFP RoHS compliant INTERNA STRUCTURE FEATURES Part name Cover Material Flammability Slider Housing Polyamide U94V- Slider contact APPICATIONS Fixed contact Terminal pin Copper alloy, Gold-plated Piano

More information

3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers

3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in

More information

SC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.

SC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders. SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)

More information

CFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant

CFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant RoHS compliant INTERNA STRUCTURE FEATURES RoHS compliant High-reliability 1 Part name Cover Slider Housing Material Polyamide Flammability U9V- Slider contact APPICATIONS Communication devices, Air-conditioning

More information

SD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.

SD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders. SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)

More information

CS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION

CS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION ROTARY SELETOR SWITHES (SMD) S-3 RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Wiper over Housing Terminal pin Base element Multi metal alloy Stainless steel (SUS 34) Epoxy

More information

S-7000 ROTARY CODED SWITCHES (SMD) S E T A FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.

S-7000 ROTARY CODED SWITCHES (SMD) S E T A FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders. S- RoHS compliant INTERNL STRUCTURE Part name Material lammability ETURES Cover Stainless steel (SUS ) O ring Rotor Spacer Moving contact ixed contact Silicone rubber Polyphenylenesulphide Stainless steel

More information

1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental

1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter

More information

POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1

POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1 SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =

More information

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32) No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock

More information

FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free

FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification

More information

Ceramic PTC Thermistor: PT Series

Ceramic PTC Thermistor: PT Series Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency

More information

Data sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free

Data sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony

More information

FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION

FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic

More information

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/ Loose Taped X CLASS (IEC 60384-4) - MKP Series Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not

More information

Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components

Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,

More information

TYPE. 250 ppm / 200 ppm / rated dissipation at T amb = ppm / 200 ppm / 250 ppm / 200 ppm /

TYPE. 250 ppm / 200 ppm / rated dissipation at T amb = ppm / 200 ppm / 250 ppm / 200 ppm / FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic

More information

3/4W, 2010 Low Resistance Chip Resistor

3/4W, 2010 Low Resistance Chip Resistor 1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)

More information

TYPE. 250 ppm / 200 ppm /

TYPE. 250 ppm / 200 ppm / FEATURES High power in small packages Available wide range to automatic insertion machine. APPLICATIONS All general purpose power applications. DESCRIPTION A homogeneous film of metal alloy is deposited

More information

All part numbers in the coding below start with "TC-" and end with "203"

All part numbers in the coding below start with TC- and end with 203 1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"

More information

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen

More information

NTC Thermistors, Accuracy Line

NTC Thermistors, Accuracy Line N Thermistors, Accuracy Line FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio APPLICATIONS Temperature sensing and control QUICK REFERENCE

More information

FrelTec GmbH. Metal Film Resistor

FrelTec GmbH. Metal Film Resistor GmbH Mathildenstr. 10A 82319 Starnberg Germany Metal Film Resistor 10/5/2010 1/21 Freltec GmbH www.freltec.com SPECIFICATION Part Number 052 012 * N * J * TB * E * 1 * _ * _ * Type 052 : Metal Film Resistor

More information

Low Inductance Ceramic Capacitor (LICC)

Low Inductance Ceramic Capacitor (LICC) Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.

More information

AD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE

AD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE 1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric

More information

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony

More information

TURQUOISE SWITCHES V TYPE (ABV)

TURQUOISE SWITCHES V TYPE (ABV) HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES V TYPE (ABV) FEATURES Miniature size (33 15.9.3 mm) (99.626.406 inch) Sealed construction for use in adverse environment Sealed construction by epoxy resin

More information

WK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603

WK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603 WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1

More information

Prosperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15

Prosperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15 1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high

More information

/ NTSSeries NTFSeries Temperature cycle : 1000 cycles

/ NTSSeries NTFSeries Temperature cycle : 1000 cycles / NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle

More information

Type Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100

Type Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100 Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action

More information

Chip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION

Chip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal

More information

CPTC Thermistor:PT Series

CPTC Thermistor:PT Series Sensor Features 1. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. No need reset supply after protection 6. Stable over along life 7. Operating temperature

More information

CKD Series Low ESL Feed Through Type

CKD Series Low ESL Feed Through Type CKD Series Low ESL Feed Through Type Type: CKD110JB CKD310JB CKD510JB CKD610JB CKD61BJB Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read efore using this product SAFETY REMINDERS REMINDERS

More information

Sp e c i f i c a t i o n

Sp e c i f i c a t i o n K M Y Last update: 2015.2.6 No.RC-K-HTS-0001-13 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) Style: RC1/4,1/2 RoHS COMPLIANCE ITEM Product specification contained in this specification are

More information

Product Series Specification Document

Product Series Specification Document Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed

More information

TYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B

TYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.

More information

WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free

WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7

More information

PMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.

PMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No. To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,

More information

WW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201

WW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05

More information

NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P

NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P EIA High Non-Magnetic Multilayer Ceramic Capacitors NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 CG 101 J 500 P T 1 2

More information

WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)

WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page

More information

WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)

WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page

More information

DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series

DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead

More information

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced

More information

Epoxy-coated Solid Electrolytic Tantalum Capacitors (LEAD FREE) TCR Series (LEAD FREE)

Epoxy-coated Solid Electrolytic Tantalum Capacitors (LEAD FREE) TCR Series (LEAD FREE) 1. Scope This specification applies to. 2. Product identification T C R S 1 (1) (2) (3) (4) (5) (6) (7) Part no. Designation: (1) series: TCR represent series number of epoxy-coated solid electrolytic

More information

WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402

WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC_WFxxH_V02

More information

5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed

5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed 5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced

More information

LKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance

LKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance Capacitance and Capacitance Tolerance Different circuit needs different capacitance and capacitance tolerance. So the selection of capacitance is depended on the need of customers. Dielectric Material

More information

PRODUCT: MULTILAYER CERAMIC CAPACITOR

PRODUCT: MULTILAYER CERAMIC CAPACITOR SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 12 Page: 1 / 18 PRODUCT: MULTILAYER CERAMIC CAPACITOR TYPE: RADIAL-LEADED TYPE CAPACITOR CUSTOMER: DOC. NO.: D13-00-E-12 Ver.: 12 APPROVED

More information

FEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components

FEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial

More information

CER Series Controlled ESR Capacitors

CER Series Controlled ESR Capacitors CER Series Controlled ESR Capacitors Type: CERB (C1608) CERD (C2012) Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before using this product SAFETY REMINDERS REMINDERS 1. If you intend

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS

More information

PRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..

PRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS.. 1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3

More information

Ceramic PTC Thermistor: PPL Series

Ceramic PTC Thermistor: PPL Series Features. RoHS compliant 2. Leaded type 3. Voltage rating: 270V ac ~500V ac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=V max ) -40 ~ +25 C (V=0)

More information

50 TZV 1500 M JDE VB 18X21.5

50 TZV 1500 M JDE VB 18X21.5 EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%

More information

Safety Certificated Capacitors X2/Y3

Safety Certificated Capacitors X2/Y3 Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)

More information

Approval sheet WF10A. 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W. *Contents in this sheet are subject to change without prior notice.

Approval sheet WF10A. 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W. *Contents in this sheet are subject to change without prior notice. WF10A 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10A_V02 MAY - 2016 FEATURE 1. High reliability and stability

More information

PECIFICATIONS Model TC03 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric.

PECIFICATIONS Model TC03 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric. PECIFICATIONS Model TC3 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric. 2. Main characteristics Table 1 Part No. TC3Z5H169B TC3Z1H169B TC3R1H169B

More information

S SERIES X1/Y2 SAFETY CAPACITOR SPEC

S SERIES X1/Y2 SAFETY CAPACITOR SPEC FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination

More information

Open-mode Design Capacitors

Open-mode Design Capacitors Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to

More information

Multi-layer ceramic chip capacitors

Multi-layer ceramic chip capacitors Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic

More information

3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed

3/8 Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with

More information

Reference Only. Spec. No. JENF243G 0004G-01 P 1 / 12. Ferrite Bead Inductor BL02/BL03 Series

Reference Only. Spec. No. JENF243G 0004G-01 P 1 / 12. Ferrite Bead Inductor BL02/BL03 Series Spec. No. JENF243G 0004G-01 P 1 / 12 1. Scope Ferrite Bead Inductor B02/B03 Series Reference Specification This reference specification applies Ferrite Bead Inductor (Radial Type). 2. Part Numbering (Ex.)

More information

Ceramic Tuning Tools CTZ Series Ultraminiature Trimmer Capacitors TCX, TCF, TSR, TSX, TSF, TSW Series

Ceramic Tuning Tools CTZ Series Ultraminiature Trimmer Capacitors TCX, TCF, TSR, TSX, TSF, TSW Series Trimmer Capacitors Multilayer Ceramic Chip Trimmer Capacitors CTZ2 Series... 3-6 CTZ3 Series... 7-10 Test Methods...11 Chip Trimmer Capacitor Packaging CTZ2 / CTZ3 Series... 12 Ceramic Tuning Tools CTZ

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount

More information

SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.

SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user. C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC

More information

CPTC Thermistor: PP Series

CPTC Thermistor: PP Series Features. RoHS compliant 2. Lead type 3. Voltage rating: 270Vac~500Vac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=Vmax) -40 ~ +25 C (V=0) 7. Agency

More information

DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16

DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16 DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally

More information

Muti-Layer Thermistor

Muti-Layer Thermistor Document No TMTR-XXOS002A 1/10 1. Scope : This specification applies for the Lead-Free MTR series of Muti-Layer thermistor made by TA-I. 2. Construction: Protective Coating Sn Plating Ni Plating Ag Electrode

More information

SMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification

SMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With

More information

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC WIMA Snubber FKP Snubber FKP Capacitors for High Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing Internal Series Connection Special Features High pulse duty Self-healing

More information

1.2 Scope: This specification is applied Noise Filter STC-D series supplied

1.2 Scope: This specification is applied Noise Filter STC-D series supplied 1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1

More information

Specifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements

Specifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance

More information

American Zettler AZ742 RELAY Datasheet

American Zettler AZ742 RELAY Datasheet American Zettler AZ74 RELAY Datasheet http://www.manuallib.com/american-zettler/az74-relay-datasheet.html FEATURES Dielectric strength 000 Vrms Low height:.7 mm Epoxy sealed version available 0 Amp switching

More information

DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R

DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR

More information

Blower Motor 3P Connector

Blower Motor 3P Connector 1. Scope Blower Motor P Connector 1.1 Content This specification covers the requirements for product performance, test methods and quality assurance provisions of Blower Motor P connector. Applicable product

More information

1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)

1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free) 1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation

More information

SPECIFICATION RECEIPT CONFIRMATION. For Automotive. SPEC. No. DATE: DATE: YEAR MONTH DAY. TDK Corporation

SPECIFICATION RECEIPT CONFIRMATION. For Automotive. SPEC. No. DATE: DATE: YEAR MONTH DAY. TDK Corporation SPECIFICATION SPEC. No. DATE: To For Automotive CUSTOMER S PRODUCT NAME TDK S PRODUCT NAME Ceramic insulated capacitors disc type for low dissipation (RR type) TYPE:CK45-R3 D KA RA RECEIPT CONFIRMATION

More information

High Ohmic/High Voltage Resistors

High Ohmic/High Voltage Resistors High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded

More information

CHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE

CHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS

More information

SPECIFICATION. Non-Controlled Copy RECEIPT CONFIRMATION. SPEC. No. S15CH-027A DATE: Jul DATE: YEAR MONTH DAY.

SPECIFICATION. Non-Controlled Copy RECEIPT CONFIRMATION. SPEC. No. S15CH-027A DATE: Jul DATE: YEAR MONTH DAY. To SPECIFICATION SPEC. No. S15CH-027A DATE: Jul. 2017 Non-Controlled Copy CUSTOMER S PRODUCT NAME TDK S PRODUCT NAME Ceramic insulated capacitors disc type class 2 TYPE:CK45-*3 D Y NA RECEIPT CONFIRMATION

More information

MIL-PRF-39035, Char. H with a Smooth and Unidirectional Output

MIL-PRF-39035, Char. H with a Smooth and Unidirectional Output Accutrim 240 (RJ26 Style) Bulk Metal Foil Technology Ultra High Precision Trimming Potentiometers, / 4 " Square, RJ26 Style, Designed to Meet or Exceed The Requirements of MIL-PRF-905, Char. H with a Smooth

More information

0805 CG 102 J 500 N T

0805 CG 102 J 500 N T NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency

More information