SIGNS AND BRAILLE. Braille
|
|
|
- Marybeth Wilkins
- 5 years ago
- Views:
Transcription
1 QUICK LOCATOR GUIDE Braille Crescent Braille Plates Fire Exit Sign in Braille Rectangular Door Jamb Plates Round Braille Plates Square Braille Plates Capacity Plates Fire Exit Instruction Signs Firefighter s Instruction Signs General Information Signs Caution Signs Danger Signs Escalator Signs Freight Elevator Signs No Smoking Signs Hoistway I.D. Plaques Test Record Signs / fax
2 Signs MIS-166 Fire Exit Instruction Signs MIS-166 Fire Sign, "In case of fire do not use elevators use stairways" 7" x 10" Plastic MIS-166E-C Sign, In Case of Fire Use Stairs, with braille 5-1/2" x 10-3/4" MIS-166E Sign, In Case Of Fire 6 x 10 SS, etched, vandal resistant MIS-166E-VAN Sign, In Case Of Fire 6 x 10 SS, etched, vandal resistant MIS-166HL Sign, In Case of Fire 6 x 7 MIS-166HL1 Sign, In Case of Fire, Do Not Use Lift, 5 x 8, Tri Flame MIS-166K Fire Sign, "In case of fire elevators are out of service, USE EXIT" 5-1/2" x 8-1/2" Stainless Steel MIS-166KA Fire Sign, USE EXIT STAIRS, 6" x 7", plastic with white back MIS-166KE Fire Sign, "USE EXIT STAIRS", 5" x 7" Stainless, Engraved & Filled, Self Adhesive MIS-166-GEN Fire Sign, Main Station "Use Stairway" 6 x 7, white plastic MIS-166XA Fire Sign, Reset Phs I, 6" x 6" Red on white plastic with Flame Symbol MIS-166E Fire Sign, "In case of fire do not use elevators 5-1/2" x 8-1/2", Stainless Steel MIS-166KA-M Fire Sign, Muntz Fire Exit Stairs with Self Adhesive Back MIS-166HL MIS-166E MIS-166E-VAN MIS-166HL1 MIS-166K MIS-166KA MIS-166-GEN MIS-166KA-M / fax
3 Signs Firefighters Instructions MIS-166L Fire Sign, Firemens Instructions for Elevator Car Station, Phase 2, OFF/HOLD/ON 5-1/2" x 8-1/2" Stainless Steel MIS-166M Fire Sign, Firemens Instructions for Main Station, Phase 1 Hall, 5-1/2" x 8-1/2" Stainless Steel MIS-166M-R Fire Sign, Fire Instructions with Reset for main station MIS-166N Fire Sign, Firemens Instructions for Elevator Car Station, Phase 2, OFF/ON 5-1/2" x 8-1/2" Stainless Steel MIS-166U Fire Sign, Firefighter's Operation Instructions ANSI II 1998, 6" x 10" Aluminum, self adhesive MIS-166UA Fire Operation Instruction, 6 x 6 A17.1, Phase II MIS-166UB Fire Operation Instruction, 6 x 6 A17.1, Phase II MIS-166UC Fire Operation Instruction, 6 x 6 A17.1, 2005 & up Phase II MIS-166X Sign, Firefighter Operations, Phase 1 MIS-166-PLATE Blank Stainless Cover Plate, 3" x 4" 16GA 304SS #4 Brush, self adhesive MIS-166L MIS-166N MIS-166M MIS-166M-R MIS-166UA MIS-166UB MIS-166U MIS-166X / fax
4 Signs MIS-166C General Signs MIS-166C Sign, "NON SMOKING AREA, 5-1/2" x 8-1/2" Stainless Steel MIS-166H Sign, Freight "This is not a passenger elevator..." 5-1/2" x 8-1/2" Stainless Steel MIS-166G Sign, Escalator Warning "CAUTION, Hold Handrail, Attend Children.." 4" x 7-1/2" Poly-vinyl, self adhesive MIS-166GS Sign, Escalator Warning "CAUTION, Hold Handrail, 3-1/4" X 6", Poly-vinyl MIS-166G-1 Sign, Escalator Warning "CAUTION, No Strollers Permitted... 4 x 7-1/2" Poly-vinyl, self adhesive MIS-166W Sign, Yellow self adhesive Escalator sign, 004" (Do not use as stairs), yellow and black MIS-166Q Sign, "Caution This Device Powered..." 5" x 7", plastic MIS-166F Sign, "Danger Electrical Machinery..." 7" x 10" Poly-vinyl self adhesive MIS-166-SOL Sign, Star of life 4" x 4" Stainless steel medical sign, self adhesive MIS-166-SUM Sign, Data Tag Summit Lift 3.25"x6.625",.030" aluminum, adhesive MIS-166H MIS-166G MIS-166G-1 MIS-166W MIS-166-SUM MIS-166-SOL MIS-166F MIS-166Q / fax
5 Test Record Signs MIS-166P* Test Tag, Date Record of hydro tests to be displayed as required 4" x 3-1/2" Aluminum, self adhesive MIS-166R* Test Tag, Traction (1 Year) 3-1/2" x 4" Aluminum, self adhesive MIS-166S* Test Tag, Traction (5 Year) 3-1/2" x 4" Aluminum, self adhesive MIS-166T* Test Tag, Escalator (1 Year) 3-1/2" x 4" Aluminum, self adhesive MIS-166AA Data Tag, 1.625" H x 3 "W MIS-166AA-A171 Code Data Tag, ASME A " H x 3" W MIS-166AB Data Tag, for Hydro specs 2-1/2" x 5" self adhesive MIS-166AC Data Tag, 3"x 4" Alum Self adhesive Code ASME A MIS-166AD Data Tag, Wire Rope 3" x 4" MIS-166AE Data Tag, Door Data Plate 4" x 7" MIS-166AF Data Tag, 3"x 4" Alum Self Adh Code ASME A MIS-166AG Test Tag, 2 x 3.5 aluminum hydro pressure test MIS-166B Label, "POWERED FROM" 3" x 1" Per NEC rule (D) *5PKG* MIS-166O Tag, Out of Service 25pk MIS-166Y Sign, Oil Gauge level magnetic MIS-166Z Sign, Brake Torque Tag FT/LB 1-1/2" H x 2-1/2" W MIS-166-MCP Label, Maintenance Control Program, 4" x 6" w/ rounded corners *Also available in rivet mount. MIS-166P MIS-166R MIS-166AA MIS-166S MIS-166T MIS-166AA-A171 MIS-166AB MIS-166AC MIS-166AF MIS-166O MIS-166AG MIS-166AD MIS-166B MIS-166Y MIS-166Z / fax
6 Plaques MIS-166D-950 MIS-166D-1800 Hoistway I.D. MIS-166D-950HL MIS-166D-2500 Capacity Plates 2" x 4" Stainless Steel MIS-166D-950 Capacity Plate 950 lbs. MIS-166D-950HL Capacity Plate 950 lbs. MIS-166D-1000 Capacity Plate 1000 lbs. MIS-166D-1200 Capacity Plate 1200 lbs. MIS-166D-1500 Capacity Plate 1500 lbs. MIS-166D-1800 Capacity Plate 1800 lbs. MIS-166D-2000 Capacity Plate 2000 lbs. MIS-166D-2500 Capacity Plate 2500 lbs. MIS-166D-3000 Capacity Plate 3000 lbs. MIS-166D-3500 Capacity Plate 3500 lbs. MIS-166D-4000 Capacity Plate 4000 lbs. MIS-166D-4500 Capacity Plate 4500 lbs. MIS-166D-5000 Capacity Plate 5000 lbs. MIS-166D-5500 Capacity Plate 5500 lbs. MIS-166D Capacity Plate lbs. MIS-166D-BLANKS Capacity Plate Blank MIS-HD4-SPECIAL Hoistway I.D. Plaque, Aluminum 4" SS Character/Black Background Self Adhesive, specify marking, examples below MIS-HD4-1 Hoistway I.D. Plaque, Aluminum Marked "Elevator 1" MIS-HD4-2 Hoistway I.D. Plaque, Aluminum Marked "Elevator 2" MIS-HD4-3 Hoistway I.D. Plaque, Aluminum Marked "Elevator 3" MIS-HD4-4 Hoistway I.D. Plaque, Aluminum Marked "Elevator 4" MIS-HD4-5 Hoistway I.D. Plaque, Aluminum Marked "Elevator 5" MIS-HD4-1 MIS-HD4A-SPECIAL Hoistway I.D. Plaque, Plastic 4 White Character/Black Background Self Adhesive, specify marking, examples below MIS-HD4A-1 Hoistway I.D. Plaque, Plastic 4" Marked "Elevator 1" MIS-HD4A-2 Hoistway I.D. Plaque, Plastic 4" Marked "Elevator 2" MIS-HD4A-3 Hoistway I.D. Plaque, Plastic 4" Marked "Elevator 3" MIS-HD4A-4 Hoistway I.D. Plaque, Plastic 4" Marked "Elevator 4" MIS-HD4A-5 Hoistway I.D. Plaque, Plastic 4" Marked "Elevator 5" MIS-HD4A-6 Hoistway I.D. Plaque, Plastic 4" Marked "Elevator 6" MIS-HD4A-4 MIS-HD4B-SPECIAL Hoistway I.D. Plaque, Aluminum 4" Black Character/SS Background Self Adhesive, specify marking, examples below, CHECK STOCK MIS-HD4B-1 Hoistway I.D. Plaque, Aluminum Marked "Elevator 1" MIS-HD4B-2 Hoistway I.D. Plaque, Aluminum Marked "Elevator 2" MIS-HD4B-3 Hoistway I.D. Plaque, Aluminum Marked "Elevator 3" MIS-HD4B-4 Hoistway I.D. Plaque, Aluminum Marked "Elevator 4" MIS-HD4B-5 Hoistway I.D. Plaque, Aluminum Marked "Elevator 5" MIS-HD4A-5 MIS-HD4BR-SPECIAL Hoistway I.D. Plaque, Aluminum 4" SS Character/Black Background Self Adhesive, specify marking, examples below, CHECK STOCK MIS-HD4BR-1 Hoistway I.D. Plaque, Aluminum Marked "Elevator 1" MIS-HD4BR-2 Hoistway I.D. Plaque, Aluminum Marked "Elevator 2" MIS-HD4BR-3 Hoistway I.D. Plaque, Aluminum Marked "Elevator 3" MIS-HD4BR-4 Hoistway I.D. Plaque, Aluminum Marked "Elevator 4" MIS-HD4BR-5 Hoistway I.D. Plaque, Aluminum Marked "Elevator 5" MIS-HD4BR-6 Hoistway I.D. Plaque, Aluminum Marked "Elevator 6" / fax
7 Braille MIS-BR Square Braille Plates MIS-BR1.25- MIS-BR1.25B-UP_ARROW MIS-BR1.25B-DOOR_OPEN MIS-BRS1.25WB- MIS-BRS1.25NB- MIS-BR1.25B-UP_ARROW MIS-BR1.25B-DOOR_OPEN Braille Plate, square, 1.25" x 1.25" with.125" radius corners, stainless steel character on black background, adhesive, specify marking i.e. MIS-BR1.25-1, shown Braille, square, 1.25" x 1.25", black character on stainless steel background Braille, square, 1.25" x 1.25", black character on stainless steel background Braille Plate, square, 1.25, White on Black, Die Cast Stud Mount. Specify marking i.e. MIS-BRS1.25WB-PHONE shown Braille Plate, square, 1.25, Nickel on Black, Die Cast Stud Mount. Specify marking i.e. MIS-BRS1.25NB-STAR-1 shown MIS-BRS1.25WB-PHONE MIS-BRS1.25NB-STAR-1 MIS-BR4- Braille Plate, Square, 4 x 4, Injection molded, white character on black background, elevator entrance jamb plate, specify marking i.e. MIS-BR4-2, shown MIS-BR4-2 MIS-BR4B- MIS-BR4S- Rectangular Braille Plates MIS-BR32- Braille Plate, square, 4 x 4, stainless character on black background, elevator entrance jamb plate, adhesive, specify marking i.e. MIS-BR4B-LR, shown Braille Plate, square, 4 x 4, black character on stainless background, elevator entrance jamb plate, adhesive, specify marking i.e. MIS-BR4S-3, shown O.E.M. # Braille Plate, door jamb, rectangle, 3.5 L x 2.5 H, white character on black background, specify marking MIS-BR4B-LR MIS-BR32A- Braille Plate, door jamb, rectangle, 3.5 L x 2.5 H, stainless steel character on black metal, elevator entrance jamb plate, specify marking MIS-BR2125B-SPECIAL EC12WB Braille Plate, Door Jamb, 2" L X 1.25" H Wht Char/Blk Back Metal MIS-BR4S-3 Braille Fire Sign MIS-166E-B Sign, "In case of fire do not use elevators..., in Braille, 5-1/2" x 1-1/2" Die Cast Aluminum MIS-BR32-5 MIS-166E-B MIS-BR32A / fax
8 Braille MIS-BR1.375RSSB-G MIS-BR1.375RBSS-13 Round Braille Plates O.E.M.# MIS-BR1.375RSSB- Braille Plate, round, 1.375, black character, stainless steel background, self adhesive. Specify marking i.e. MIS-BR1.375RSSB-G shown MIS-BR1.375RBSS- MIS-BR1.375RBW- MIS-BR1.375RBB- Braille Plate, round, 1.375, stainless steel character on black background, metal, self adhesive. Specify marking i.e. MIS-BR1.375RBSS-13 shown Braille Plate, round, 1.375, white character on black background, metal, self adhesive. Specify marking i.e. MIS-BR1.375RBW-13 shown Braille Plate, round, 1.375, bronze character on black background, metal, self adhesive. Specify marking i.e. MIS-BR1.375RBB-4 shown MIS-BRS1.375WB- Braille Plate, round, 1.375, White on Black, Die Cast Stud Mount. Specify marking i.e. MIS-BRS1.375WB-1 shown MIS-BR1.375RBW-13 MIS-BR1.375RBB-4 MIS-BRS1.375NB- Braille Plate, round, 1.375, Nickle on Black, Die Cast Stud Mount. Specify marking i.e. MIS-BRS1.375NB-2 shown MIS-BR1.50RBW- EC15RWB Braille, Round 1.50" Black Metal/White Char/Self Adh. Specify marking i.e. MIS-BR1.50RBW-LL2 shown MIS-BRS1.375WB-1 MIS-BRS1.375NB-2 MIS-BR1.50RBW-LL2 Unique Sizes & Characters MIS-BR54B-SPECIAL Braille, 5" X 4", Black with stainless steel marking MIS-BR21-PH11 EC12WB Braille Plate, Door Jamb 2" L X 1.25" H Wht Char/Blk Back Metal MIS-BR4BB-SPECIAL Braille, 4" Sq Black Char On Brass Background Special Marking / fax
9 Crescent Braille Plates S.E.E.S. MIS-BR1.375CBSSM- MIS-BR1.375CBWM- MIS-BR1.375CBWM-SPECIAL MIS-BR1.375CBWP- MIS-BR1.375CW2WB- MIS-BR1.375CW2NB- Need a sign that's not shown? Just ask! We will custom make any sign to your requirements. Braille Plate, crescent, x 2.050, stainless steel character on black background, metal. Studs and hardware included, specify marking i.e. MIS-BR1.375CBSSM-B, shown Braille Plate, crescent, x 2.050, white character on black background, metal. Studs and hardware included. Specify marking i.e. MIS-BR1.375CBWM-G, shown Braille Plate, crescent, x 2.050, white character on black background, metal. Studs and hardware included. Special marking. Braille Plate, crescent, x 2.050, white character on black background, plastic. Studs and hardware included. Specify marking i.e. MIS-BR1.375CBWP-26, shown Braille Plate, Crescent, white character on black background, Die Cast Stud Mount, 1.560" X 1.358". Specify marking Braille Plate, Crescent, nickel character on black background, Die Cast Stud Mount, 1.560" X 1.358". Specify marking MIS-BR1.375CBSSP- MIS-BR1.375CBSSP-SPECIAL Braille Plate, crescent, x 2.050, silver character on black background, plastic. Studs and hardware included. Specify marking i.e. MIS-BR1.375CBSSP-17, shown Braille Plate, crescent, x 2.050, silver character on black background, plastic. Studs and hardware included. Special marking. MIS-BR1.375CBSSM-B MIS-BR1.375CCU1BSS- MIS-BR1.375CCU1BSS-SPECIAL Braille Plate, crescent 2.05" x 1.375", Metal Black with silver character. Specify marking Braille Plate, crescent 2.05" x 1.375", Metal Black with silver character. Special marking. MIS-BR1.375CBWM-G MIS-BR1.375CBWP-26 MIS-BR1.375CBSSP / fax
10 Braille Crescent Braille Plates S.E.E.S. MIS-BR1.375CBBM- MIS-BR1.375CBBM-SPECIAL Braille Plate, crescent, x 2.050, bronze character on black background, metal. Studs and hardware included. Specify marking i.e. MIS-BR1.375CBBM-STAR-1, shown Braille Plate, crescent, x 2.050, bronze character on black background, metal. Special marking. MIS-BR1.375CBBM-STAR-1 For More Braille Plate Options, See Individual Catalog Sections OR Just ask! We will custom make any Braille Plate to your requirements / fax
Materials Available Yellow Brass Antiqued Yellow Brass Bronze Antiqued Bronze Aluminum
Classic Antique Vintage Dial Indicators 144 Dial Type Indicators C.J. Anderson & Company can restore, reproduce or provide a new dial type indicator for your project. With cast cover plates that achieve
www. ElectricalPartManuals. com Flexitest Switch Assemblies Type FT-19R and FT-19RX INTL APPLICATION
Effective: January 2004 Supersedes, dated June 1998 APPLICATION QUALITY FEATURES Descriptive Bulletin 41-078INTL Flexitest Switch Assemblies Type The type FT-19R (standard length) and FT-19RX (extended
Parallel Requirements of Construction Standards for Accessibility ANSI, UFAS and ADAAG
Total # of spaces: # of accessible spaces: Parallel Requirements of Construction Standards for Accessibility PARKING Cite 4.3 Cite 4.6 Cite 4.6 required number; however, the number of accessible spaces
Flexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB March 2008
Flexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB41-078 March 2008 FT-19R and FT-19RX FT-19R 3RU with Individual Clear Covers APPLICATION FEATURES The type FT-19R (standard length) and
CATALOGUE. Visit our website at airmastersigns.com to see a complete and up to date listing of all our sign products.
CATALOGUE N E E D A C U S T O M O R D E R? C A L L U S AT 1-8 0 0-7 8 8-6 8 0 5 O R I N W I N N I P E G 2 0 4-9 4 4-7 4 4 6 O R E M A I L U S A T S I G N S @ A I R M A S T E R S A L E S. C O M T O D I
P-CHANNEL MOSFET Qualified per MIL-PRF-19500/564
Available on commercial versions P-CHANNEL MOSFET Qualified per MIL-PRF-19500/564 DESCRIPTION This switching transistor is military qualified up to the JANS level for high-reliability applications. This
AS STANDARD
AS 1319-1994 STANDARD SAFETY SIGNS FOR THE OCCUPATIONAL ENVIRONMENT COMPLIES WI TH THE ST ANDARDS AUST RAL I A COMMITTEE INDU ST RI AL WARNI NG SIG N S Safety Signs are crucial in any work environment.
N-CHANNEL MOSFET Qualified per MIL-PRF-19500/557
,,, Available on commercial versions N-CHANNEL MOSFET Qualified per MIL-PRF-19500/557 DESCRIPTION This family of switching transistors is military qualified up to the JANTXV level for highreliability applications.
DISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS
FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series
SAFETY GROUP 430 SAFETY WALK-THROUGH CHECKLIST
SAFETY GROUP 430 SAFETY WALK-THROUGH CHECKLIST Service Department Dealership Name: Date: Address: Contact Name/Title: GENERAL 1. Is a 15-minute continuous plumbed or gravity fed eyewash station installed,
THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)
CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5
GS-IR 8816 Series Infrared Thermometer
GS-IR 8816 Series Infrared Thermometer Objects having temperatures above absolute zero radiate infrared energy all the time. This infrared energy has a certain functional relations with the surface temperature
USRA Steam Engine
USRA Steam Engine --- 0-5- 0-5-0 0-57- 0-57-0 USRA --- Steam Engine (top section) Engine Parts.) Shell (Pennsylvania)(# 7) FB-00 *5.00 ( Brunswick green, Tuscan red & graphite ) ( gold numbers ).) Shell
Pushbutton Units and Indicator Lights
Insert labels and insert caps Clear, illuminated and indicator lights can be fitted with insert labels and caps for identification purposes. These labels and caps are made of a semi-transparent molded
MAINTENANCE EVALUATION CHECKLIST HYDRAULIC ELEVATORS
Manufacturer: Model: Evaluation Performed By: INTRODUCTION: This checklist will enable the user to make an objective appraisal of the condition of the equipment. Given the variety and complexity of the
Engineering *S54683A0119* Pearson BTEC Level 3 Nationals
Pearson BTEC Level 3 Nationals Write your name here Surname Forename Learner Registration Number Centre Number Engineering Unit 1: Engineering Principles Extended Certificate, Foundation Diploma, Diploma,
KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3
NO. ISSUED: REVISED: 71193 OCT. 2, 2001 JAN. 27, 2003 HOSHIZAKI STACKABLE CRESCENT CUBER MODELS KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 PARTS LIST KM-1600SWH L-0 June, 2001 M-0 Feb., 2002 M-1 Feb.,
Physics 202 Exam 1. May 1, 2013
Name: Physics 202 Exam 1 May 1, 2013 Word Problems Show all your work and circle your final answer. (Ten points each.) 1. If 2.4 m 3 of a gas initially at STP is compressed to 1.6 m 3 and its temperature
Fluid Cooling Industrial PF Series
Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure
xce series & xjf EXPLOSIONPROOF ENCLOSURES EXPLOSIONPRROOF ENCLOSURES CERTIFICATIONS STANDARD FEATURES DESIGN OPTIONS MATERIAL ADALET.
EXPLOSIONPROOF XCE: Explosionproof Control Enclosures XCEX: Flameproof Control Enclosures XCEQ: Explosionproof Quad-Lead Control Enclosures XJF: Explosionproof Junction Boxes STANDARD FEATURES standard
American Revolution Deluxe Full Cutoff LED Series ARDCL
P R O D U C T O V E R V I E W SERIES ARDCL Applications: Streetscapes Walkways Pathways Parks Features: Colonial LED lantern, replaces HID models up to 150W HPS for street and area lighting applications
Valiant Full Cutoff LED Series AVPCL2
PRODUCT OVERVIEW SERIES AVPCL2 Applications: Streetscapes Walkways Pathways Parks Features: Colonial LED lantern, replaces HID models up to 150W HPS for street and area lighting applications Eleven (11)
Supplier contact details: Superior Industries Ltd Wellington, New Zealand. Ph: Fax:
2017 Supplier contact details: Superior Industries Ltd Wellington, New Zealand Ph: 04 939 2100 Fax: 04 939 2110 Email: sales@superior.co.nz CONTENTS 1 Selecting Snow Chains 1 Guidelines For Ordering 1
N-CHANNEL MOSFET Qualified per MIL-PRF-19500/543
,, and Available on commercial versions N-CHANNEL MOSFET Qualified per MIL-PRF-19500/543 DESCRIPTION This family of,, and switching transistors are military qualified up to the JANTX level for high-reliability
MN-ISO-2000FN-E. ISO-2000FN COATING THICKNESS GAGE OPERATION MANUAL
MN-ISO-2000FN-E www.insize.com ISO-2000FN COATING THICKNESS GAGE OPERATION MANUAL V0 Place the probe on the zero plate and wait until beep. Lift the probe for minimal 5 cm off the zero plate and wait
Commercial Generator Parts Catalog. PROTEC Series
Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,
SmartLine Radar Level Meter RM70
Page 1 of 5 SmartLine Radar Level Meter Model Selection Guide Reliable measurement in difficult process conditions +/- 3 mm / +/-0.12" standard accuracy Operates up to a flange temperature of 200 0 C /
Type M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
MARINELLI BEAKERS CATALOG
GA-MA & ASSOCIATES, INC. Specialty Products for the Radiochemistry Laboratory MARINELLI BEAKERS CATALOG Snap-on Lid Design Gas Marinelli Beaker Threaded Lid Design Tel: 352.687-8840 404 Cypress Road Fax:
BUILT TOUGH. P.O. Box 845 Winona, MN Ph Tf Tech Support Fx
BUILT TOUGH P.O. Box 845 Winona, MN 55987 Ph 507.474.6250 Tf 800.749.1064 Tech Support 507.457.3346 Fx 507.452.5217 sales@ozliftingproducts.com QUALITY CONTROL In our continued commitment to quality, we
P-CHANNEL MOSFET Qualified per MIL-PRF-19500/595
Compliant P-CHANNEL MOSFET Qualified per MIL-PRF-19500/595 Qualified Levels: JAN, JANTX, and JANTXV DESCRIPTION This 2N7236U switching transistor is military qualified up to the JANTXV level for highreliability
Tap Changer Type MHF III Specification, Assembly and Materials
Tap Changer Type MHF III Specification, ssembly and Materials Descriptions General Specifications Remarks available in one, two or three phase applications shaft length available in variable sizes connection
Uniclass L4181. EPIC D181 CI/SfB. 11th edition
Uniclass L4181 EPIC D181 CI/SfB (31.59) Xt7 11th edition recess leather cabinet handles recess leather cabinet handles CNC machined solid brass recessed with flush fitted bonded bridle leather Custom lengths
N-CHANNEL MOSFET Qualified per MIL-PRF-19500/592
,, & Compliant N-CHANNEL MOSFET Qualified per MIL-PRF-19500/592 Qualified Levels: JAN, JANTX, and JANTXV DESCRIPTION This family of switching transistors is military qualified up to the JANTXV level for
WING FUNG METAL CHAIN MFY.
OUR SPIKES ARE TWO WAY USE : 1) PUT ON THE LEATHER OR BAG ( LOOSE SPIKES WITH SCREW ) 2) PENDANTS ON THE NECKLACE ( ANY OUR SPIKES ) Page 1/ 13 Item Dimension Weight US$ /pc inch 10 x 55 3/8 x 2-1/16"
KM-2000SWE3 KM-2000SRE3
NO. ISSUED: REVISED: 71090 JUNE 7, 1994 AUG. 7, 2000 HOSHIZAKI STACKABLE CRESCENT CUBER MODEL KM-2000SWE3 KM-2000SRE3 (FINAL) PARTS LIST KM-2000SWE3 D-0 June, 1994 E-1 April, 1995 F-1 May, 1996 F-2 July,
INSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
Surface-mounting Thermostats ATH Type Series
Page 1/9 urface-mounting Thermostats ATH eries k enclosure protection IP 54 k tested to IN EN 14597 (replacing IN 3440) Brief description Thermostats control and monitor thermal processes. Instruments
LO-COG DC Gearmotors. Series GM8000. Series GM9000. Series GM BULLETIN LCG Series GM8000, GM9000, GM Power Your Ideas
BULLETIN LCG Series GM8, GM9, GM149 LO-COG DC Gearmotors Pittman brand LO-COG brush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears
Visit any one of our 30 locations or visit us on line at
TYPE IA ALUMINUM 2886509079 2886501870 2886510013 2886510010 2886510014 2886504441 AS3002 2' TYPE IA AS3003 3' TYPE IA AS3004 4' TYPE IA AS3006 6' TYPE IA AS3008 8' TYPE IA AS3010 10' TYPE IA 34.99 57.99
PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
N-CHANNEL MOSFET Qualified per MIL-PRF-19500/592
,, and Compliant N-CHANNEL MOSFET Qualified per MIL-PRF-19500/592 Qualified Levels: JAN, JANTX, and JANTXV DESCRIPTION This family of switching transistors is military qualified up to the JANTXV level
TR FI ES MA GM MK TN EG AZ IQ SY SA AE YE MZ TAP CHANGERS TYPE MHM
TR FI ES M GM MK TN EG IQ SY S E YE M S TYPE MHM GENERL SPECIFICTION These tap changers are available in one, two or three phase applications. Multi layer types are also available. The shaft length is
Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
Field IT 50T Series Transmitters
Data Sheet SS/G/A_ Field IT 0T Series Transmitters gauge/absolute pressure transmitter Ranges: -00 to 0000kPa - to 00bar -. to 6000psi Base accuracy : 0.% (BFSL) Chemical Vapour Deposition (CVD) technology
INSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
For Customer Service, Rev A - 6/ OF 6
Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
Distinctive Characteristics
Distinctive Characteristics Three methods of panel mounting: flat frame for flush with face or subpanel, snap-in, and PCB. Miniature Rockers Series M High insulating barriers increase isolation of circuits
Data Sheet. Functional Safety Characteristic Safety Values for BE.. Brakes * _0715*
Drive Technology \ Drive Automation \ System Integration \ Services *22291814_0715* Data Sheet Functional Safety Characteristic Safety Values for BE.. Brakes Edition 07/2015 22291814/EN SEW-EURODRIVE Driving
Table of Contents CHIP NTC THERMISTOR SENSOR (NTC THERMISTOR)
Table of Contents CHIP NTC THERMISTOR Company Profile. 1 NTC Thermistor.. 2 Description / Features / Applications.... 4 Basic Characteristics. 5 SMD Chip Dimension / Structure. 6 Order Information... 7
INSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
0T 0TS S T TS T TS T TS 0T T T T T T 6T T TS 6T 6TS T TS 6T 6TS 6T 6TS 6T 6TS Frame.. 6. 6 6... 6.... B 6 6... A..... 0..0... 6.... 6.....06 6.66.. 6.0.....6 0... C 6..0 6. 6....... E.. D....... F 6............
MAKE YOUR MARK. UNIVERSAL LET S TALK SHOP. ENGINE COVERS TRIM
UNIVERSAL MAKE YOUR MARK. LET S TALK SHOP. Victory Motorcycles are rarin to go right off the showroom floor. But when you want to show off your style, use accessories from Victory and turn your ride into
RIGID PVC CONDUIT FITTINGS AND ACCESSORIES
AND ACCESSORIES APPLICATIONS Utilities Cable, data and communication lines Institutional, commercial, industrial buildings Residential applications, service entrances Street and highway underground feeds
Minute Impulse Clock Controller I01DN
99b-mi USER S MANUAL Minute Impulse Clock Controller Mon Jun 01, 2009 12:00:00 PM DST HOLD ENTER KEY TO BEGIN CANCEL HR I01DN 97 West Street Medfield, MA 02052 U.S.A. (508) 359-4396 Pg. 2 of 20 TABLE OF
FOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR
1 INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR Nordic Auto Plow LLC is pleased to provide a plow blade that can be used with your Action Trackchair year round. We are not affiliated
DRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
[1] (b) State why the equation F = ma cannot be applied to particles travelling at speeds very close to the speed of light
![[1] (b) State why the equation F = ma cannot be applied to particles travelling at speeds very close to the speed of light](/thumbs/75/72218892.jpg "[1] (b) State why the equation F = ma cannot be applied to particles travelling at speeds very close to the speed of light")
1 (a) Define the newton... [1] (b) State why the equation F = ma cannot be applied to particles travelling at speeds very close to the speed of light... [1] (c) Fig. 3.1 shows the horizontal forces acting
Care should be taken to give an appropriate number of significant figures in the final answers to calculations.
X069//0 NATIONAL QUALIFICATIONS 0 MONDAY, 7 MAY PHYSICS.00 PM.0 PM ADVANCED HIGHER Reference may be made to the Physics Data Booklet. Answer all questions. Any necessary data may be found in the Data Sheet
Pediment Head Design Ideas Shown Actual Size
Pediment Head Design Ideas Shown Actual Size Adding a pediment head is a simple way to dramatically transform any architectural door or window opening. 4650-A-BB 1 7 /16" x 1 9 /16" 5668-BB 1 3 /4" x 2
Revision Extra: Chemistry 3 Acids
Revision Extra: Chemistry 3 Acids CHEMISTRY REVISION WORKSHEET FIRST TERM YEAR 11 It is very difficult to know the exact composition of the Earth s early atmosphere, whereas we do know the percentage of
The OCTANORM system components set a new standard in shop design.
O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories
Body (Black) O-ring. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings ubing: etric Size/Connection hread:, Rc, G, NP, NPF Series RoS One-touch fitting with antistatic prevention. One-touch IN/OU connection. Possible to use from vacuum ( 0 kpa.
Blue Comet REV
-028-1 Blue Comet -6-2 REV.01101 Boiler Parts 1.) Shell ( blue & gray ) FB-1100055 *10.00 ( boiler )( # 8 ) 2.) Cab ( blue & dark blue ) FB-1100056 *0.00 ( # 8 ).) Handrail ( right )( nickel ) FB-111001
Cambridge International Examinations Cambridge International General Certificate of Secondary Education
Cambridge International Examinations Cambridge International General Certificate of Secondary Education *9332994* PHYSICS Paper 4 Theory (Extended) Candidates answer on the Question Paper. No Additional
Series 7500 Formed Metal Bellows Catalog 974C
Series 00 Formed Metal Bellows Catalog C Innovators of the industry Bellows assemblies for safety valves, control valves, and regulators. When you look for a formed bellows which is reliable, has a long
Mechanics of Materials Primer
Mechanics of Materials rimer Notation: A = area (net = with holes, bearing = in contact, etc...) b = total width of material at a horizontal section d = diameter of a hole D = symbol for diameter E = modulus
Terminal Block Accessories
Kliptite (Quick onnect) - Single Row Specifications: Terminal lock ccessories Kliptite (Quick onnect) accept standard female wire terminals. These Klipties are ideal for applications that require a positive,
SECTION 23 - METRIC DESIGN INFORMATION. Table of Contents
SECTION 23 - METRIC DESIGN INFORMATION Table of Contents Metric System Conversions and Abbreviations... 23-3 EXTREN Availability List... 23-4 EXTREN vs. Traditional Materials... 23-6 SECTION 23 METRIC
SW Diesel Engine GL062502
30-22-0 30-2260-0 30-2261-0 30-2262-0 30-2263-0 30-2264-0 SW-100 Diesel Engine GL06202 1.) Window lens ( tinted )( rear ) FA-20018 3.00 2.) Window lens ( tinted )( sides ) FA-20019 2.00 3.) Window lens
2.3. Rockers. Contents
. SVRSealed Vehicle SVRSealed Vehicle Rocker Contents Description SVRSealed Vehicle Above Panel Rocker Switch............... Below Panel Rocker Switch............... Technical Data and Specifications..........
Model 791 Calibration Plate for Tiltmeters and Inclinometers
User s Manual Model 791 Calibration Plate for Tiltmeters and Inclinometers Serial No. Baseline, L Date measured By mm Introduction The Model 791 Calibration Plate is designed for calibrating any tiltmeter
IS YOUR BUSINESS PREPARED FOR A POWER OUTAGE?
IS YOUR BUSINESS PREPARED FOR A POWER OUTAGE? Keeping your power on is our business Whether your business is large, small or somewhere in between, we understand that a power outage presents special challenges
Infrared / K Thermometer Remote Temperature Measurement ( Non-Contact ) 1327K INSTRUCTION MANUAL
Infrared / K Thermometer Remote Temperature Measurement ( Non-Contact ) 1327K INSTRUCTION MANUAL TABLE OF CONTENTS TITLE PAGE INTRODUCTION...1. SAFETY INFORMATION...2. FEATURES...4. SPECIFICATIONS...4.
DGCU165-5B 36 W. Five-Burner Cooktop
Standard Features & Accessories All models include Dimensioned fit the majority of similarly sized cookp cuuts Sealed burners with brass flame ports and porcelain/cast iron burner caps Burners mounted
PLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
Digital Controller Operation
A Family Company Manufacturing In The USA Since 1969 Full Gauge Digital Controller Operation This manual is specific to the operation and diagnostic guides of the Full Gauge digital controller used in
KM-1300SAF KM-1300SWF KM-1300SRF KM-1300SAF3 KM-1300SWF3 KM-1300SRF3
NO: 71130 ISSUED: OCT. 8, 1998 REVISED: JUNE 14, 2005 HOSHIZAKI STACKABLE CRESCENT CUBER MODEL KM-1300SAF KM-1300SWF KM-1300SRF KM-1300SAF3 KM-1300SWF3 KM-1300SRF3 (FINAL) S LIST 56 KM-1300SAF H-0 JAN.
N-CHANNEL MOSFET Qualified per MIL-PRF-19500/555
and Compliant N-CHANNEL MOSFET Qualified per MIL-PRF-19500/555 DESCRIPTION Qualified Levels: JAN, JANTX, and JANTX These and devices are military qualified up to a JANTX level for highreliability applications.
Odor Removal Filter Series AMF
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS ATV Front Plow Mount Kit Part Number: 80031 Applications: 2007+ Honda Rancher 420 2007+ Honda Rancher ES 420 2009+ Honda Rancher AT 420 *Not compatible with 2.5ci or A2000 winches
Impedance relay and protection assemblies
RXZK 21H, 22H, 23H 509 006-BEN Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice (SE970175) (SE970184) Features Micro-processor based impedance relay with R and X settings
Tisa Enterprises. The Clamping Professionals
Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0
VOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
Semiconductor (AC) fuses
PSC gr sizes 7x - 690 VAC Main characteristics 6,9 grb 71 PA 200 6,9 grb 73 TTF 1000 + MS7V1-5 UR Ferraz Shawmut PSC-gRB 690 VAC fuse-links provide maximum flexibility in equipment design and ultimate
LowPro Series TABLE TOP CHAIN & MODULAR BELT CONVEYORS. Conveyors - Pallet Handling - Aluminium Profile Machine Guarding - Special Purpose Machinery
LowPro Series TABLE TOP CHAIN & MODULAR BELT CONVEYORS Conveyors - Pallet Handling - Aluminium Profile Machine Guarding - Special Purpose Machinery LOWPRO SL SERIES TABLETOP CHAIN CONVEYORS Standard Head
Front flange FLV. Max. [knm/stroke]
![Front flange FLV. Max. [knm/stroke]](/thumbs/92/109382839.jpg "Front flange FLV. Max. [knm/stroke]")
SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,
Distinctive Characteristics
Distinctive haracteristics Miniature Toggles Series M ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggle has two fl atted sides which fit into a complementary
COOPERATIVE PATENT CLASSIFICATION
CPC - B66B - 2014.07 - Interleaved - page 1 CPC COOPERATIVE PATENT CLASSIFICATION B66B ELEVATORS; ESCALATORS OR MOVING WALKWAYS ({ apparatus for raising or lowering persons on theatrical stages or the
Surface-mounting thermostats Series ATH
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
CV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
NAIL SECTION TABLE OF CONTENTS
NAIL SECTION TABLE OF CONTENTS ANCHOR TRUSS BOX NAILS-1 NAILS-1 COMMMON NAILS-1 & 2 DECK NAILS NAILS-2 & 3 DRYWALL DUPLEX FINISH FLOOR - HARD SCREW NAILS-4 NAILS-4 NAILS-5 NAILS-5 MASONRY - STUB NAILS-6
H i g h A m p e r a g e 2 5 t o A M P. T y p e I & I I I V e h i c l e P r o t e c t i o n. I P 6 7 W a t e r p r o o f
H i g h A m p e r a g e 2 5 t o 3 0 0 A M P T y p e I & I I I V e h i c l e P r o t e c t i o n I P 6 7 W a t e r p r o o f I g n i t i o n - P r o t e c t e d S A E & A B Y C C o m p l i a n t L E D T
One-Year Limited Warranty
INDEX Product overview...3 Installing the batteries...4 Mounting the Rifle Scope...5 Operation...6 Windage and Elevation adjustments...7-8 Infrared Illumination...8 Focusing...9 Power display & battery
55% OFF CARBIDE HIGH SPEED STEEL COBALT. Phone: (616) Toll-Free: Fax: (616) cbdekorne.com
CARBIDE HIGH SPEED STEEL COBALT Phone: () - Toll-Free: -00--0 Fax: () - cbdekorne.com PLEASE TAKE % OFF PRINTED S END MICRO END THREAD COUNTER SINKS CHAMFER DRILL TAPS & DIES OUR COMMITMENT TO YOU...
PRODUCTION LINES INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS. compliance on products shown is complete or in-progress
PRODUCTION LINES European Product Line INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS compliance on products shown is complete or in-progress INDEX: Air Feeds...2 Servo Feeds...4 Straighteners...6 Stock Reels...7