Description Subject Teaching Methodology L T P C
|
|
- Eugene Elvin Stanley
- 5 years ago
- Views:
Transcription
1 Course/ Code Engineering Mechanics Teaching Total contact hours - 64 Engineering Physics Course Objectives: The students completing this course are expected to understand the concepts of forces and its resolution in different planes, resultant of force system, Forces acting on a body, their free body diagrams using graphical methods. They are required to understand the concepts of centre of gravity and moments of inertia and their application, Analysis of frames and trusses, different types of motion, friction and application of work - energy method. UNIT I Introduction to Engg. Mechanics Basic Concepts. Systems of Forces : Coplanar Concurrent Forces Components in Space Resultant Moment of Force and its Application Couples and Resultant of Force Systems. Introduction, limiting friction and impending motion, coulomb s laws of dry friction, coefficient of friction, cone of friction. UNIT II Equilibrium of Systems of Forces: Free Body Diagrams, Equations of Equilibrium of Coplanar Systems, Spatial Systems for concurrent forces. Lamis Theorm, Graphical method for the equilibrium of coplanar forces, Converse of the law of Triangle of forces, converse of the law of polygon of forces condition of equilibrium. UNIT III Centroid : Centroids of simple figures (from basic principles ) Centroids of Composite Figures. Centre of Gravity : Centre of gravity of simple body (from basic principles), centre of gravity of composite bodies, pappus theorem. Area moments of Inertia : Definition Polar Moment of Inertia, Transfer Theorem, Moments of Inertia of Composite Figures, Products of Inertia, Transfer Formula for Product of Inertia. Mass Moment of Inertia : Moment of Inertia of Masses, Transfer Formula for Mass Moments of Inertia, mass moment of inertia of composite bodies.
2 UNIT I V Kinematics : Rectilinear and Curvilinear motions Velocity and Acceleration Motion of Rigid Body Types and their Analysis in Planar Motion. Kinetics: Analysis as a Particle and Analysis as a Rigid Body in Translation Central Force Motion Equations of Plane Motion Fixed Axis Rotation Rolling Bodies. UNIT V Work Energy Method: Equations for Translation, Work-Energy Applications to Particle Motion, Connected System-Fixed Axis Rotation and Plane Motion. Impulse momentum method. Torsional vibration- The compound pendulum- General case of moment proportional to angle of rotation- D Alembert s principle in rotation. Course Outcomes: 1. To understand the concepts of forces and its resolution in different planes. 2. To understand the concepts of Equilibrium of Systems of Forces, law of Triangle of forces and converse of the law of polygon of forces. 3. To understand the concepts of Area moments of Inertia, Mass Moment of Inertia. 4. To understand the concepts of Equations for Translation, D Alembert s principle in rotation. TEXT BOOKS: 1. Engg. Mechanics - S.Timoshenko & D.H.Young., 4 th Edn -, Mc Graw Hill publications. 2. Engineering Mechanics statics and dynamics:a Nelson, Mc Graw Hill publications 3. Engineering Mechanics: GS Sawhney, PHI Learning Pvt. Ltd. 4. Engineering Mechanics: Basudeb Bhattacharyya, Oxford University Press REFERENCES: 1. Engineering Mechanics: statics and dynamics I.H.Shames, Pearson Publ. 2. Mechanics For Engineers, dynamics: - F.P.Beer & E.R.Johnston 5 th Edn Mc Graw Hill Publ. 3. Engineering Mechanics: Fedinand. L. Singer, Harper Collins. Useful Web-links :
3 Course/ Code Engineering Drawing Teaching Total contact hours - 64 Aptitude to learn Course Objectives: Engineering drawing being the principle method of communication for engineers, the objective is to introduce the students, the techniques of constructing the various types of polygons, curves and scales. The objective is also to visualize and represent the 3D objects in 2D planes with proper dimensioning, scaling etc. UNIT I Introduction to drawing Instruments and uses. Lettering. Polygons : Construction of regular polygons using given length of a side; Curves used in Engineering Practice, conic sections, construction of conics by different methods, cycloidal curves, epi and hypo-cycloids. Involutes. UNIT II Scales : Vernier and Diagonal scales. Introduction to orthographic projections; projections of points; projections of straight lines parallel to both the planes; projections of straight lines parallel to one plane and inclined to the other plane. Projections of straight lines inclined to both the planes, determination of true lengths and angle of inclinations and traces. UNIT III Projections of planes: Regular planes perpendicular/parallel to one plane and inclined to the other reference plane; inclined to both the reference planes. UNIT IV Projections of Solids Prisms, Pyramids, Cones and Cylinders with the axis inclined to one of the planes. UNIT V Conversion of isometric views to orthographic views; Conversion of orthographic views to isometric views. Prospective Projection.
4 Course Outcomes: 1. To understand the concepts and use of drawing Instruments and Curves used in Engineering Practice. 2. To understand the concepts of Vernier and Diagonal scales and concepts of orthographic projections. 3. To understand the concepts of Projections of isometric views to orthographic views. TEXT BOOKS: 1. Engineering Graphics by PI Varghese, McGrawHill Publishers 2. Engineering Drawing by N.D. Butt, Chariot Publications 3. Engineering Drawing by K.L.Narayana & P. Kannaiah, Scitech Publishers. REFERENCE BOOKS: 1. Engineering Drawing by Agarwal & Agarwal, Tata McGraw Hill Publishers 2. Engineering Drawing by Shah & Rana, Pearson Publishers 3. Engineering Drawing + AutoCad K Venugopal, V. Prabhu Raja, New Age Publishers Useful Web-links :
5 Course/ Code ENGINEERING WORKSHOP 3 2 Teaching Total contact hours - 24 Aptitude to learn Course Objective: To impart hands-on practice on basic engineering trades and skills. Note: At least two exercises to be done from each trade. Trade: Carpentry Fitting Black Smithy House Wiring Tin Smithy 1. T-Lap Joint 2. Cross Lap Joint 3. Dovetail Joint 4. Mortise and Tennon Joint 1. Vee Fit 2. Square Fit 3. Half Round Fit 4. Dovetail Fit 1. Round rod to Square 2. S-Hook 3. Round Rod to Flat Ring 4. Round Rod to Square headed bolt 1. Parallel / Series Connection of three bulbs 2. Stair Case wiring 3. Florescent Lamp Fitting 4. Measurement of Earth Resistance 1. Taper Tray 2. Square Box without lid 3. Open Scoop 4. Funnel
STATICS Chapter 1 Introductory Concepts
Contents Preface to Adapted Edition... (v) Preface to Third Edition... (vii) List of Symbols and Abbreviations... (xi) PART - I STATICS Chapter 1 Introductory Concepts 1-1 Scope of Mechanics... 1 1-2 Preview
More information2015 ENGINEERING MECHANICS
Set No - 1 I B.Tech I Semester Regular/Supple. Examinations Nov./Dec. 2015 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem. E, Aero E, AME, Min E, PE, Metal E, Textile Engg.) Time: 3 hours
More informationENGINEERING MECHANICS
ENGINEERING MECHANICS BASUDEB BHATTACHARYYA Assistant Professor Department of Applied Mechanics Bengal Engineering and Science University Shibpur, Howrah OXJFORD UNIVERSITY PRESS Contents Foreword Preface
More information2015 ENGINEERING MECHANICS
Set No - 1 I B. Tech I Semester Supplementary Examinations Aug. 2015 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Max. Marks: 70 Question
More informationMECHANICS OF SOLIDS Credit Hours: 6
MECHANICS OF SOLIDS Credit Hours: 6 Teaching Scheme Theory Tutorials Practical Total Credit Hours/week 4 0 6 6 Marks 00 0 50 50 6 A. Objective of the Course: Objectives of introducing this subject at second
More informationDEPARTMENT OF MECHANICAL ENGINEERING COURSE DESCRIPTION
DEPARTMENT OF MECHANICAL ENGINEERING COURE DECRIPTION Course Code Course Title : A10302 : ENGINEERING MECHANIC Course tructure : Lectures Tutorials Practical Credits 3 - - 6 Course Coordinator : Dr.D.Govardhan,
More informationA. Objective of the Course: Objectives of introducing this subject at second year level in civil branches are: 1. Introduction 02
Subject Code: 0CL030 Subject Name: Mechanics of Solids B.Tech. II Year (Sem-3) Mechanical & Automobile Engineering Teaching Credits Examination Marks Scheme Theory Marks Practical Marks Total L 4 T 0 P
More informationKINGS COLLEGE OF ENGINEERING ENGINEERING MECHANICS QUESTION BANK UNIT I - PART-A
KINGS COLLEGE OF ENGINEERING ENGINEERING MECHANICS QUESTION BANK Sub. Code: CE1151 Sub. Name: Engg. Mechanics UNIT I - PART-A Sem / Year II / I 1.Distinguish the following system of forces with a suitable
More informationENGINEERING MECHANICS
ENGINEERING MECHANICS ENGINEERING MECHANICS (In SI Units) For BE/B.Tech. Ist YEAR Strictly as per the latest syllabus prescribed by Mahamaya Technical University, Noida By Dr. R.K. BANSAL B.Sc. Engg.
More informationAPPLIED MATHEMATICS IM 02
IM SYLLABUS (2013) APPLIED MATHEMATICS IM 02 SYLLABUS Applied Mathematics IM 02 Syllabus (Available in September) 1 Paper (3 hours) Applied Mathematics (Mechanics) Aims A course based on this syllabus
More informationwhere G is called the universal gravitational constant.
UNIT-I BASICS & STATICS OF PARTICLES 1. What are the different laws of mechanics? First law: A body does not change its state of motion unless acted upon by a force or Every object in a state of uniform
More informationSet No - 1 I B. Tech I Semester Regular Examinations Jan./Feb ENGINEERING MECHANICS
3 Set No - 1 I B. Tech I Semester Regular Examinations Jan./Feb. 2015 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Question Paper Consists
More informationPESIT-BSC Department of Science & Humanities
Class No. 1. 2. 3. LESSON PLAN 15CIV13/23 ELEMENTS OF CIVIL ENGINEERING Course objectives: AND ENGINEERING MECHANICS The objectives of this course is to make students to learn basics of Civil Engineering
More information2. a) Explain the equilibrium of i) Concurrent force system, and ii) General force system.
Code No: R21031 R10 SET - 1 II B. Tech I Semester Supplementary Examinations Dec 2013 ENGINEERING MECHANICS (Com to ME, AE, AME, MM) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions
More informationENGINEERING MECHANICS: STATICS AND DYNAMICS
ENGINEERING MECHANICS: STATICS AND DYNAMICS Dr. A.K. Tayal ENGINEERING MECHANICS STATICS AND DYNAMICS A.K. Tayal Ph. D. Formerly Professor Department of Mechanical Engineering Delhi College of Engineering
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad - 500 043 AERONAUTICAL ENGINEERING DEFINITIONS AND TERMINOLOGY Course Name : ENGINEERING MECHANICS Course Code : AAEB01 Program :
More informationVALLIAMMAI ENGINEERING COLLEGE SRM NAGAR, KATTANKULATHUR DEPARTMENT OF MECHANICAL ENGINEERING
VALLIAMMAI ENGINEERING COLLEGE SRM NAGAR, KATTANKULATHUR 603203 DEPARTMENT OF MECHANICAL ENGINEERING BRANCH: MECHANICAL YEAR / SEMESTER: I / II UNIT 1 PART- A 1. State Newton's three laws of motion? 2.
More informationUSHA RAMA COLLEGE OF ENGINEERING & TECHNOLOGY
Set No - 1 I B. Tech II Semester Supplementary Examinations Feb. - 2015 ENGINEERING MECHANICS (Common to ECE, EEE, EIE, Bio-Tech, E Com.E, Agri. E) Time: 3 hours Max. Marks: 70 Question Paper Consists
More informationBachelor of Technology Civil Engineering. 01CI0301: Mechanics of Solids
01CI0301: Mechanics of Solids Objective of the Course Objectives of introducing this subject at second year level in civil branches are: To study about identification of different types of forces, systematic
More informationGOPALAN COLLEGE OF ENGINEERING AND MANAGEMENT Department of Civil Engineering COURSE PLAN
Appendix - C GOPALAN COLLEGE OF ENGINEERING AND MANAGEMENT Department of Civil Engineering Academic Year: 2017-18 Semester: EVEN COURSE PLAN Semester: II Subject Code& Name: 15CIV23& Elements of Civil
More informationBachelor of Technology Civil Engineering. 01CI0301: Mechanics of Solids
01CI0301: Mechanics of Solids Objective of the Course Objectives of introducing this subject at second year level in civil branches are: To study about identification of different types of forces, systematic
More informationAcademic Course Description. BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering
BME202 - ENGINEERING MECHANICS Course (catalog) description Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME202 - ENGINEERING
More informationAPPLIED MATHEMATICS AM 02
AM SYLLABUS (2013) APPLIED MATHEMATICS AM 02 SYLLABUS Applied Mathematics AM 02 Syllabus (Available in September) Paper I (3 hrs)+paper II (3 hrs) Applied Mathematics (Mechanics) Aims A course based on
More informationSTATICS AND DYNAMICS
ENGINEERING MECHANICS STATICS AND DYNAMICS FOURTEENTH EDITION R. C. HIBBELER PEARSON Hoboken Boston Columbus San Francisco New York Indianapolis London Toronto Sydney Singapore Tokyo Montreal Dubai Madrid
More informationME101: Engineering Mechanics ( )
ME101: Engineering Mechanics (3 1 0 8) 2016-2017 (II Semester); Division IV Budhaditya Hazra Room N-307 Department of Civil Engineering budhaditya.hazra@iitg.ernet.in Phone: 258 3334/5334 Web: www.iitg.ernet.in/budhaditya.hazra
More informationSECOND ENGINEER REG. III/2 APPLIED MECHANICS
SECOND ENGINEER REG. III/2 APPLIED MECHANICS LIST OF TOPICS Static s Friction Kinematics Dynamics Machines Strength of Materials Hydrostatics Hydrodynamics A STATICS 1 Solves problems involving forces
More informationQuestions from all units
Questions from all units S.NO 1. 1 UNT NO QUESTON Explain the concept of force and its characteristics. BLOOMS LEVEL LEVEL 2. 2 Explain different types of force systems with examples. Determine the magnitude
More informationCourse syllabus Engineering Mechanics - Dynamics
Course syllabus Engineering Mechanics - Dynamics COURSE DETAILS Type of study programme Study programme Course title Course code ECTS (Number of credits allocated) Course status Year of study Course Web
More informationE 490 FE Exam Prep. Engineering Mechanics
E 490 FE Exam Prep Engineering Mechanics 2008 E 490 Course Topics Statics Newton s Laws of Motion Resultant Force Systems Moment of Forces and Couples Equilibrium Pulley Systems Trusses Centroid of an
More informationSTATICS & DYNAMICS. Engineering Mechanics. Gary L. Gray. Francesco Costanzo. Michael E. Plesha. University of Wisconsin-Madison
Engineering Mechanics STATICS & DYNAMICS SECOND EDITION Francesco Costanzo Department of Engineering Science and Mechanics Penn State University Michael E. Plesha Department of Engineering Physics University
More informationENGINEERING MECHANICS
Set No - 1 I B. Tech II Semester Regular/Supply Examinations July/Aug. - 2015 ENGINEERING MECHANICS (Common to ECE, EEE, EIE, Bio-Tech, E Com.E, Agri. E) Time: 3 hours Max. Marks: 70 Question Paper Consists
More informationJNTU World. Subject Code: R13110/R13 '' '' '' ''' '
Set No - 1 I B. Tech I Semester Supplementary Examinations Sept. - 2014 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Max. Marks: 70 Question
More informationBergen Community College Division of Math, Science and Technology Department of Physical Sciences. Course Syllabus PHY 294 Engineering Mechanics
Bergen Community College Division of Math, Science and Technology Department of Physical Sciences Course Syllabus PHY 294 Engineering Mechanics Semester and year: Course Number: Meeting Times and Locations:
More informationK.GNANASEKARAN. M.E.,M.B.A.,(Ph.D)
DEPARTMENT OF MECHANICAL ENGG. Engineering Mechanics I YEAR 2th SEMESTER) Two Marks Question Bank UNIT-I Basics and statics of particles 1. Define Engineering Mechanics Engineering Mechanics is defined
More informationAP Physics 1. Course Overview
Radnor High School Course Syllabus AP Physics 1 Credits: Grade Weighting: Yes Prerequisites: Co-requisites: Length: Format: 1.0 Credit, weighted Honors chemistry or Advanced Chemistry Honors Pre-calculus
More informationBE Semester- I ( ) Question Bank (MECHANICS OF SOLIDS)
BE Semester- I ( ) Question Bank (MECHANICS OF SOLIDS) All questions carry equal marks(10 marks) Q.1 (a) Write the SI units of following quantities and also mention whether it is scalar or vector: (i)
More informationGUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD.
ENGINEERING MECHANICS 1. RATIONALE Engineering Mechanics is a branch of Applied Science where laws of physics are applied to solve engineering problems. Broadly speaking Engineering Mechanics can be classified
More information: APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE
COURSE TITLE : APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIODS 1 Simple stresses
More informationCOURSE CODE: GEE 212 COURSE TITLE: ENGINEERING MECHANICS NUMBER OF UNITS: 3 Units COURSE DURATION: Three hours per week
COURSE CODE: GEE 212 COURSE TITLE: ENGINEERING MECHANICS NUMBER OF UNITS: 3 Units COURSE DURATION: Three hours per week COURSE LECTURER: DR. BALOGUNAIZEBEOJE INCENT INTENDED LEARNING OUTCOMES At the completion
More informationELEMENTARY ENGINEERING MECHANICS
ELEMENTARY ENGINEERING MECHANICS Other title by the same author Applied Mechanics Made Simple (Heinemann: 'Made Simple' series) Other Macmllian titles of related interest Basic Engineering Mechanics J.
More informationA TEXTBOOK APPLIED MECHANICS
A TEXTBOOK OF APPLIED MECHANICS A TEXTBOOK OF APPLIED MECHANICS (Including Laboratory Practicals) S.I. UNITS By R.K. RAJPUT M.E. (Heat Power Engg.) Hons. Gold Medallist ; Grad. (Mech. Engg. & Elect. Engg.)
More informationFoundations and Applications of Engineering Mechanics
Foundations and Applications of Engineering Mechanics 4843/24, 2nd Floor, Ansari Road, Daryaganj, Delhi - 110002, India Cambridge University Press is part of the University of Cambridge. It furthers the
More informationPLANAR KINETIC EQUATIONS OF MOTION (Section 17.2)
PLANAR KINETIC EQUATIONS OF MOTION (Section 17.2) We will limit our study of planar kinetics to rigid bodies that are symmetric with respect to a fixed reference plane. As discussed in Chapter 16, when
More informationElementary Mechanics Using Matlab
Anders Malthe-S0renssen Elementary Mechanics Using Matlab A Modern Course Combining Analytical and Numerical Techniques ^ Springer Contents 1 Introduction 1 1.1 Physics 1 1.2 Mechanics 2 1.3 Integrating
More informationDepartment of Mechanical Engineering Course plan
Faculty of Engineering & Technology, SRM University, Kattankulathur 603203 School of Mechanical Engineering Department of Mechanical Engineering Course plan Course code : ME1002 Date : 19 th December 2013
More informationPART-A. a. 60 N b. -60 N. c. 30 N d. 120 N. b. How you can get direction of Resultant R when number of forces acting on a particle in plane.
V.S.. ENGINEERING OLLEGE, KRUR EPRTMENT OF MEHNIL ENGINEERING EMI YER: 2009-2010 (EVEN SEMESTER) ENGINEERING MEHNIS (MEH II SEM) QUESTION NK UNIT I PRT- EM QUESTION NK 1. efine Mechanics 2. What is meant
More informationISBN :
ISBN : 978-81-909042-4-7 - www.airwalkpublications.com ANNA UNIVERSITY - R2013 GE6253 ENGINEERING MECHANICS UNIT I: BASICS AND STATICS OF PARTICLES 12 Introduction Units and Dimensions Laws of Mechanics
More information2007 Problem Topic Comment 1 Kinematics Position-time equation Kinematics 7 2 Kinematics Velocity-time graph Dynamics 6 3 Kinematics Average velocity
2007 Problem Topic Comment 1 Kinematics Position-time equation Kinematics 7 2 Kinematics Velocity-time graph Dynamics 6 3 Kinematics Average velocity Energy 7 4 Kinematics Free fall Collisions 3 5 Dynamics
More informationPhysical Science and Engineering. Course Information. Course Number: ME 100
Physical Science and Engineering Course Number: ME 100 Course Title: Course Information Basic Principles of Mechanics Academic Semester: Fall Academic Year: 2016-2017 Semester Start Date: 8/21/2016 Semester
More informationSTATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ENGS STATICS
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE PREPARED BY: ARTHUR HURLBUT, Ph.D. P.E.(October 2006) UPDATED BY: MICHAEL J. NEWTOWN, P.E. (October 2006) REVISED BY:
More informationBASIC ENGINEERING MECHANICS
BASIC ENGINEERING MECHANICS Other titles of interest to engineers An Introduction to Engineering Fluid Mechanics J. A. Fox Principles of Engineering Thermodynamics E. M. Goodger Analysis and Presentation
More informationLecture PowerPoints. Chapter 10 Physics for Scientists and Engineers, with Modern Physics, 4 th edition Giancoli
Lecture PowerPoints Chapter 10 Physics for Scientists and Engineers, with Modern Physics, 4 th edition Giancoli 2009 Pearson Education, Inc. This work is protected by United States copyright laws and is
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code ENGR-011 Course Outline of Record 1. Course Code: ENGR-011 2. a. Long Course Title: Statics b. Short Course Title: STATICS 3. a. Catalog Course Description: This course
More information1. Replace the given system of forces acting on a body as shown in figure 1 by a single force and couple acting at the point A.
Code No: Z0321 / R07 Set No. 1 I B.Tech - Regular Examinations, June 2009 CLASSICAL MECHANICS ( Common to Mechanical Engineering, Chemical Engineering, Mechatronics, Production Engineering and Automobile
More informationENGINEERING MECHANICS - Question Bank
E Semester-_IST YEAR (CIVIL, MECH, AUTO, CHEM, RUER, PLASTIC, ENV,TT,AERO) ENGINEERING MECHANICS - Question ank All questions carry equal marks(10 marks) Q.1 Define space,time matter and force, scalar
More information2016 ENGINEERING MECHANICS
Set No 1 I B. Tech I Semester Regular Examinations, Dec 2016 ENGINEERING MECHANICS (Com. to AE, AME, BOT, CHEM, CE, EEE, ME, MTE, MM, PCE, PE) Time: 3 hours Max. Marks: 70 Question Paper Consists of Part-A
More information6.12 MECHANICS 4, M4 (4764) A2
6.1 MECHANICS 4, M4 (4764) A Objectives To prepare students for more advanced courses at university by extending the use of calculus in mechanics. Students will be expected to be technically competent
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: CODE NO. : SEMESTER: Two PROGRAM: AUTHOR: Aviation Technology Flight Douglas McKinnon DATE: Jan 2013
More information.VALLIAMMAI ENGINEERING COLLEGE
.VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203 DEPARTMENT OF GENERAL ENGINEERING QUESTION BANK II SEMESTER GE 8292- Engineering Mechanics Regulation 2017 Academic Year 2017 18 VALLIAMMAI
More informationinertia of a body, principal axes of inertia, invariants of an inertia tensor, and inertia triangle inequalities are illustrated and discussed.
Preface This book belongs to a series of three books written simultaneously (the remaining two are titled Classical Mechanics: Dynamics and Classical Mechanics: Applied MechanicsandMechatronics). This
More informationPhysics for Scientists and Engineers 4th Edition, 2017
A Correlation of Physics for Scientists and Engineers 4th Edition, 2017 To the AP Physics C: Mechanics Course Descriptions AP is a trademark registered and/or owned by the College Board, which was not
More informationGet Discount Coupons for your Coaching institute and FREE Study Material at Force System
Get Discount Coupons for your Coaching institute and FEE Study Material at www.pickmycoaching.com Mechanics Force System When a member of forces simultaneously acting on the body, it is known as force
More informationJNTU World. Subject Code: R13110/R13
Set No - 1 I B. Tech I Semester Regular Examinations Feb./Mar. - 2014 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Max. Marks: 70 Question
More informationDept of ECE, SCMS Cochin
B B2B109 Pages: 3 Reg. No. Name: APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY SECOND SEMESTER B.TECH DEGREE EXAMINATION, MAY 2017 Course Code: BE 100 Course Name: ENGINEERING MECHANICS Max. Marks: 100 Duration:
More information(Please write your Roll No. immediately) Mid Term Examination. Regular (Feb 2017)
(Please write your Roll No. immediately) Roll No... Mid Term Examination Regular (Feb 2017) B.Tech-II sem Sub-Engineering Mechanics Paper code- ETME-110 Time-1.5 hours Max Marks-30 Note: 1. Q.No. 1 is
More informationCOURSE TITLE : THEORY OF STRUCTURES -I COURSE CODE : 3013 COURSE CATEGORY : B PERIODS/WEEK : 6 PERIODS/SEMESTER: 90 CREDITS : 6
COURSE TITLE : THEORY OF STRUCTURES -I COURSE CODE : 0 COURSE CATEGORY : B PERIODS/WEEK : 6 PERIODS/SEMESTER: 90 CREDITS : 6 TIME SCHEDULE Module Topics Period Moment of forces Support reactions Centre
More informationF R. + F 3x. + F 2y. = (F 1x. j + F 3x. i + F 2y. i F 3y. i + F 1y. j F 2x. ) i + (F 1y. ) j. F 2x. F 3y. = (F ) i + (F ) j. ) j
General comments: closed book and notes but optional one page crib sheet allowed. STUDY: old exams, homework and power point lectures! Key: make sure you can solve your homework problems and exam problems.
More informationMechanics. In the Science Program, Mechanics contributes to the following program goals described in the Exit Profile:
Mechanics Objectives: 00UR Discipline: Physics Ponderation: 3-2-3 Course Code: 203-NYA-05 Prerequisite: Sec. V Physics 534, Mathematics 536 (or equivalent) Course Credit: 2 2/3 Corequisite: 00UP (Calculus
More informationIgor Emri Arkady Voloshin. Statics. Learning from Engineering Examples
Statics Igor Emri Arkady Voloshin Statics Learning from Engineering Examples Igor Emri University of Ljubljana Ljubljana, Slovenia Arkady Voloshin Lehigh University Bethlehem, PA, USA ISBN 978-1-4939-2100-3
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION MECHANICAL ENGINEERING PRINCIPLES: STATICS AND DYNAMICS
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit Number- 2550727 -Superclass- -Title- RC MECHANICAL ENGINEERING PRINCIPLES: STATICS AND DYNAMICS -----------------------------------------
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE CODE NO. : MCH110 SEMESTER: TWO
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: APPLIED MECHANICS CODE NO. : SEMESTER: TWO PROGRAM: AUTHOR: DATE: APPROVED: TOTAL CREDITS: PREREQUISITE(S):
More informationAP Physics C Syllabus
Course Overview AP Physics C Syllabus AP Physics C will meet for 90 minutes on block scheduling and for 45 minutes on regular scheduling. Class activities will include lecture, demonstration, problem solving
More informationSYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595. l. Course #: PHYSC NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR
SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595 l. Course #: PHYSC 121 2. NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR NAME OF COURSE ENGINEERING PHYSICS 1 WITH LAB 3. CURRENT DATE: SUMMER
More informationLesson Plan. Name of the Faculty : SANDEEP (VTF in CIVIL ENGG.) Lesson plan duration : 15 Weeks(July 2018 to Nov 2018)
Lesson Plan Name of the Faculty : SANDEEP (VTF in CIVIL ENGG.) Discipline : CIVIL Engg. Semester : 3 rd Subject : Applied Mechanics Lesson plan duration : 15 s(july 2018 to Nov 2018) - 1 2 3 Theory Practical
More informationTEMPLATE FOR COURSE SPECIFICATION
TEMPLATE FOR COURSE SPECIFICATION HIGHER EDUCATION PERFORMANCE REVIEW: PROGRAMME REVIEW COURSE SPECIFICATION This Course Specification provides a concise summary of the main features of the course and
More informationCOURSE TITLE : APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4017 COURSE CATEGORY : A PERIODS/WEEK : 6 PERIODS/ SEMESTER : 108 CREDITS : 5
COURSE TITLE : APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4017 COURSE CATEGORY : A PERIODS/WEEK : 6 PERIODS/ SEMESTER : 108 CREDITS : 5 TIME SCHEDULE MODULE TOPICS PERIODS 1 Simple stresses
More informationModesto Junior College Course Outline of Record PHYS 101
Modesto Junior College Course Outline of Record PHYS 101 I. OVERVIEW The following information will appear in the 2011-2012 catalog PHYS 101 General Physics: Mechanics 5 Units Prerequisite: Satisfactory
More informationEngineering Mechanics Objective module 1 with solutions: A K GAIKAR
Engineering Mechanics Objective module 1 with solutions: A K GAIKAR 1. What is the branch of engineering mechanics which refers to the study of stationary rigid body? A. Statics B. Kinetics C. Kinematics
More informationSTATICS. FE Review. Statics, Fourteenth Edition R.C. Hibbeler. Copyright 2016 by Pearson Education, Inc. All rights reserved.
STATICS FE Review 1. Resultants of force systems VECTOR OPERATIONS (Section 2.2) Scalar Multiplication and Division VECTOR ADDITION USING EITHER THE PARALLELOGRAM LAW OR TRIANGLE Parallelogram Law: Triangle
More informationAP Physics C Mechanics Objectives
AP Physics C Mechanics Objectives I. KINEMATICS A. Motion in One Dimension 1. The relationships among position, velocity and acceleration a. Given a graph of position vs. time, identify or sketch a graph
More informationAppendix. Vectors, Systems of Equations
ppendix Vectors, Systems of Equations Vectors, Systems of Equations.1.1 Vectors Scalar physical quantities (e.g., time, mass, density) possess only magnitude. Vectors are physical quantities (e.g., force,
More informationSMDE - Mechanical Systems and Equipment Design
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2016 295 - EEBE - Barcelona East School of Engineering 712 - EM - Department of Mechanical Engineering 713 - EQ - Department of Chemical
More informationUnit 21 Couples and Resultants with Couples
Unit 21 Couples and Resultants with Couples Page 21-1 Couples A couple is defined as (21-5) Moment of Couple The coplanar forces F 1 and F 2 make up a couple and the coordinate axes are chosen so that
More informationClass XI Physics Syllabus One Paper Three Hours Max Marks: 70
Class XI Physics Syllabus 2013 One Paper Three Hours Max Marks: 70 Class XI Weightage Unit I Physical World & Measurement 03 Unit II Kinematics 10 Unit III Laws of Motion 10 Unit IV Work, Energy & Power
More informationINTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE
INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE Kulliyyah / Institute Department / Centre Programme Name of Course / Mode Engineering Mechanical Engineering All Engineering programmes Statics
More informationQuantitative Skills in AP Physics 1
This chapter focuses on some of the quantitative skills that are important in your AP Physics 1 course. These are not all of the skills that you will learn, practice, and apply during the year, but these
More informationMECHANICS OF MATERIALS
STATICS AND MECHANICS OF MATERIALS Ferdinand P. Beer E. Russell Johnston, Jr, John T. DeWolf David E Mazurek \Cawect Mc / iur/» Craw SugomcT Hilt Introduction 1 1.1 What is Mechanics? 2 1.2 Fundamental
More informationDynamics of Machinery
1 Preamble Dynamics of Machinery Relation between motion and forces causing is a fascinating subject. This study is a generally referred as dynamic. Modern Engineering aims at analysing and predicting
More informationMontgomery County Community College EGR 203 Engineering Statics 3-2-2
Montgomery County Community College EGR 203 Engineering Statics 3-2-2 COURSE DESCRIPTION: This course describes the mechanical behavior of materials and systems in equilibrium using Newton s laws of motion.
More informationif the initial displacement and velocities are zero each. [ ] PART-B
Set No - 1 I. Tech II Semester Regular Examinations ugust - 2014 ENGINEERING MECHNICS (Common to ECE, EEE, EIE, io-tech, E Com.E, gri. E) Time: 3 hours Max. Marks: 70 Question Paper Consists of Part- and
More informationPHY131H1S - Class 20. Pre-class reading quiz on Chapter 12
PHY131H1S - Class 20 Today: Gravitational Torque Rotational Kinetic Energy Rolling without Slipping Equilibrium with Rotation Rotation Vectors Angular Momentum Pre-class reading quiz on Chapter 12 1 Last
More informationReg. No. : Question Paper Code : B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER Second Semester.
Ws11 Reg. No. : Question Paper Code : 27275 B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2015. Second Semester Civil Engineering GE 6253 ENGINEERING MECHANICS (Common to all branches except Electrical
More informationAPPLIED SCIENCE RATIONALE DETAILED CONTENTS Units and dimensions Force and motions Work, Power and Energy Rotational Motion Heat
APPLIED SCIENCE HRS/Week 5 - - The Subject deals with basic concepts. Principles and application of physics and chemistry as applied to Aeronautical and Aircraft Maintenance. These principles will be helpful
More informationScalar product Work Kinetic energy Work energy theorem Potential energy Conservation of energy Power Collisions
BLOOM PUBLIC SCHOOL Vasant Kunj, New Delhi Lesson Plan Class: XI Subject: Physics Month: August No of Periods: 11 Chapter No. 6: Work, energy and power TTT: 5 WT: 6 Chapter : Work, energy and power Scalar
More informationWeek Topics of study Home/Independent Learning Assessment (If in addition to homework) 7 th September 2015
Week Topics of study Home/Independent Learning Assessment (If in addition to homework) 7 th September Teacher feedback to prompt action FP1: No lessons Student to write feedback in here when necessary
More informationDIVIDED SYLLABUS ( ) - CLASS XI PHYSICS (CODE 042) COURSE STRUCTURE APRIL
DIVIDED SYLLABUS (2015-16 ) - CLASS XI PHYSICS (CODE 042) COURSE STRUCTURE APRIL Unit I: Physical World and Measurement Physics Need for measurement: Units of measurement; systems of units; SI units, fundamental
More informationAP PHYSICS 1 Learning Objectives Arranged Topically
AP PHYSICS 1 Learning Objectives Arranged Topically with o Big Ideas o Enduring Understandings o Essential Knowledges o Learning Objectives o Science Practices o Correlation to Knight Textbook Chapters
More informationDynamic Modelling of Mechanical Systems
Dynamic Modelling of Mechanical Systems Dr. Bishakh Bhattacharya Professor, Department of Mechanical Engineering g IIT Kanpur Joint Initiative of IITs and IISc - Funded by MHRD Hints of the Last Assignment
More informationENGINEERING MECHANICS (A2ME01)
ENGINEERING MECANIC (A2ME01) 15.1 COURE DECRIPTION: Course Code Course Title Course tructure A2ME01 Engineering Mechanics (MEC) Lectures Tutorials Practicals Credits 3 1-3 Course Coordinator Mrs.Anuradha,
More informationMECHANICS OF STRUCTURES SCI 1105 COURSE MATERIAL UNIT - I
MECHANICS OF STRUCTURES SCI 1105 COURSE MATERIAL UNIT - I Engineering Mechanics Branch of science which deals with the behavior of a body with the state of rest or motion, subjected to the action of forces.
More information