ENGINEERING MECHANICS (A2ME01)
|
|
- Abel Arnold
- 6 years ago
- Views:
Transcription
1 ENGINEERING MECANIC (A2ME01) 15.1 COURE DECRIPTION: Course Code Course Title Course tructure A2ME01 Engineering Mechanics (MEC) Lectures Tutorials Practicals Credits Course Coordinator Mrs.Anuradha, Associate Professor,Mechanical Team of Instructors Mr.Zaheeruddin,Asst.Professor,Aero COURE OVERVIEW: Engineering Mechanics course is belongs to basic knowledge of mechanics. This course introduces the basic concepts of mechanical engineering which is the Foundation for all subjects of the Mechanical Engineering discipline This course is to introduce the basic principles of engineering mechanics with emphasis on their analysis and application to practical engineering problems PREREQUIITE: Level Credits Periods/Weeks Prerequisites UG 3 4 Understand basic knowledge of Engineering Mechanics and Principles 15.3 MARK DITRIBUTION: ession Marks (25M) Continuous Assessment Tests (Midterm tests): There shall be 2 midterm examinations. Each midterm examination consists of one objective paper, one subjective paper and four assignments. The objective paper is for 10 marks and subjective paper is for 10 marks, with duration of 1 hour 20 minutes (20 minutes for objective and 60 minutes for subjective paper). Objective paper is set for 20 bits of multiple choice questions, fill-in the blanks, 10 marks. ubjective paper contains of 4 full questions (one from each unit) of which, the student has to answer 2 questions, each question carrying 5 marks. First midterm examination shall be conducted for 2.5 units of syllabus and second midterm examination shall be conducted for another 2.5 units. University End Total Exam Marks Marks
2 5 marks are allocated for Assignments. First two assignments should be submitted before the conduct of the first mid, and the second two assignments should be submitted before the conduct of the second mid. The total marks secured by the student in each midterm examination are evaluated for 25 marks, and the average of the two midterm examinations shall be taken as the final marks secured by each candidate EVALUATION CEME:. No Component Duration Marks 1 I Mid Examination 1 hour and 20 min 20 2 I Assignment 5 3 II Mid Examination 1 hour and 20 min 20 4 II Assignment 5 MID Examination marks to be considered as average of above 2 MID s 5 External Examination 3 hours 75 Total 75 Course Objectives This course is to introduce the basic principles of engineering mechanics with emphasis on their analysis and application to practical engineering problems. After learning this course, you should have the ability to: I. olve for the resultants of any force systems II. Differentiates between different force systems III. Draw the FBD and find the internal and external forces acting on a body for coplanar and non coplanar force system IV. Differentiate between centroid and centre of gravity V. Calculate the CG for a given object VI. Using transfer formula/polar moment of inertia can calculate the moment of inertia for area and solids VII. Analyse the forces causing motion and calculates the friction Course Outcomes 1. tudents practice in applying their knowledge of mathematics, science, and engineering and to expand this knowledge into the vast area of rigid body Mechanics. 2. tudents able to design by requiring the solution of open ended problems. 3. tudents are able to do various problems on Mechanics of olids, Mechanical Design and tructural Analysis.
3 15.6 OW PROGRAM OUTCOME ARE AEED:. No Outcome Level Proficiency assessed by A B C D An ability to apply the knowledge of mathematics, science, and engineering to solve Electronics and communications engineering problems An ability to design and conduct engineering experiments, as well as to analyze and interpret data. An ability to design and construct a hardware and software system, component, or process to meet desired needs, within realistic constraints An ability to function on multi disciplinary teams Lectures and problem solving Design s and assignments Lectures, Assignments, Exams E An ability to identify, formulate and solve engineering problems Lectures and labs F An understanding of professional, social and ethical responsibility -- G -- An ability to communicate effectively I The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context An ability to recognize the need for and an ability to engage in life long Oral discussions learning. Group discussions J An ability to gain knowledge of contemporary issues -- K An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice Discussions, L Graduates are able to participate and succeed in competitive examination like GRE, GATE, TOEFL, GMAT etc exams
4 M The use of current application software s; the design and use of circuits; and the analysis, design, testing, and documentation of Analog and Digital circuits for the use in Communications engineering. N The basic knowledge of electronics, electrical components, computer architecture and applications of microcomputer systems, communications needed in data transport N=None =upportive =ighlyrelated YLLABU UNIT I Introduction to Engineering Mechanics Basic Concepts, Laws of Motion, Force-types, characteristics- Principle of transmissibility. ystems of Forces: Classification, Coplanar Concurrent Forces Components of force in pace Resultant- Triangle law of Forces-Polygon law of Forces- Parallelogram Law of Forces-Resolution and composition of Forces Coplanar Non-Concurrent ystem of Forces, Resultant of Parallel system of Forces -Moment of Force and its Application Varignon s theorem, Couples. UNIT II Equilibrium of ystems of Forces:Free Body Diagrams, Types of upports and their reactions, Internal and External Forces - Types of Equilibrium, Equations of Equilibrium, Conditions of Equilibrium, Equilibrium of bodies under Coplanar concurrent system of forces -Lamis Theorem, Converse of the law of Triangle of forces, converse of the law of polygon of forces. Equilibrium of patial ystems for concurrent forces. UNIT III Centroid :Centroids of Lines and Areas (from basic principles ) simple figures Centroid of Composite Figures- Centroid of L, T, I,Z and channel ections. Centre of Gravity:Centre of gravity of simple solids (from basic principles), centre of gravity of composite solids, Pappu s-guldinu s theorems. UNIT IV Area moment of Inertia : Definition Moment of inertia of plane areas, Polar Moment of Inertia, Transfer Theorem, Moments of Inertia of Composite Figures, Moment of Inertia of ections, Products of Inertia, Transfer Formula for Product of Inertia. Mass Moment of Inertia: Moment of Inertia of imple solids, Transfer Formula for Mass Moments of Inertia, mass moment of inertia of composite bodies.
5 UNIT V Friction: Definitions-Types of Friction Limiting Friction laws of tatic and Dynamic Frictions Angle of friction- Angle of Repose- Cone of Friction-Equilibrium of rigid body on an Inclined plane - Application of Friction Ladder, Wedge and crew friction. BOOK 1. Engineering. Mechanics / Timoshenko & Young. 2. Engineering. Mechanics /.. Bhavikatti& J.G. Rajasekharappa REFERENCE BOOK 1. Engineering. Mechanics / D..Kumar 2. Engineering. Mechanics / R.V. Kulkarni & R.D. Askhevkar 3. Engineering. Mechanics /R.. Khurmi /.Chand.
DEPARTMENT OF MECHANICAL ENGINEERING COURSE DESCRIPTION
DEPARTMENT OF MECHANICAL ENGINEERING COURE DECRIPTION Course Code Course Title : A10302 : ENGINEERING MECHANIC Course tructure : Lectures Tutorials Practical Credits 3 - - 6 Course Coordinator : Dr.D.Govardhan,
More informationINSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad
Course Title INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 Course Code Regulation MECHANICAL ENGINEERING COURSE DESCRIPTION KINEMATICS OF MACHINERY A40309 R13 Course Structure Lectures
More informationAcademic Course Description. BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering
BME202 - ENGINEERING MECHANICS Course (catalog) description Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME202 - ENGINEERING
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, yderabad - 500 043 Course Title Course Code Regulations MECANICAL ENGINEERING COURE DECRIPTION FORM DYNAMIC OF MACINERY A50317 R13-JNTU Course
More informationBachelor of Technology Civil Engineering. 01CI0301: Mechanics of Solids
01CI0301: Mechanics of Solids Objective of the Course Objectives of introducing this subject at second year level in civil branches are: To study about identification of different types of forces, systematic
More informationBachelor of Technology Civil Engineering. 01CI0301: Mechanics of Solids
01CI0301: Mechanics of Solids Objective of the Course Objectives of introducing this subject at second year level in civil branches are: To study about identification of different types of forces, systematic
More informationINTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE
INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE Kulliyyah / Institute Department / Centre Programme Name of Course / Mode Engineering Mechanical Engineering All Engineering programmes Statics
More informationA. Objective of the Course: Objectives of introducing this subject at second year level in civil branches are: 1. Introduction 02
Subject Code: 0CL030 Subject Name: Mechanics of Solids B.Tech. II Year (Sem-3) Mechanical & Automobile Engineering Teaching Credits Examination Marks Scheme Theory Marks Practical Marks Total L 4 T 0 P
More informationMECHANICS OF SOLIDS Credit Hours: 6
MECHANICS OF SOLIDS Credit Hours: 6 Teaching Scheme Theory Tutorials Practical Total Credit Hours/week 4 0 6 6 Marks 00 0 50 50 6 A. Objective of the Course: Objectives of introducing this subject at second
More informationCOWLEY COLLEGE & Area Vocational Technical School
COWLEY COLLEGE & Area Vocational Technical School COURSE PROCEDURE FOR PHS 4570 STATICS 3 Credit Hours Student Level: This course is open to students on the college level in either the freshman or sophomore
More informationThree year rotational plan for assessing student outcomes: EET
Three year rotational plan for assessing student outcomes: EET Year 2015 ABET a, b, c, d, e ABET a, b, c, d, e 2016 ABET f, g, h, i, j, k ABET f, g, h, i, j, k 2017 EET a - e EET a - e 2018 ABET a, b,
More informationLesson Plan. Name of the Faculty : SANDEEP (VTF in CIVIL ENGG.) Lesson plan duration : 15 Weeks(July 2018 to Nov 2018)
Lesson Plan Name of the Faculty : SANDEEP (VTF in CIVIL ENGG.) Discipline : CIVIL Engg. Semester : 3 rd Subject : Applied Mechanics Lesson plan duration : 15 s(july 2018 to Nov 2018) - 1 2 3 Theory Practical
More informationBE Semester- I ( ) Question Bank (MECHANICS OF SOLIDS)
BE Semester- I ( ) Question Bank (MECHANICS OF SOLIDS) All questions carry equal marks(10 marks) Q.1 (a) Write the SI units of following quantities and also mention whether it is scalar or vector: (i)
More information2015 ENGINEERING MECHANICS
Set No - 1 I B.Tech I Semester Regular/Supple. Examinations Nov./Dec. 2015 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem. E, Aero E, AME, Min E, PE, Metal E, Textile Engg.) Time: 3 hours
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
Course Title Course Code INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad - 500 043 STRUCTURAL ENGINEERING (Department of Civil Engineering) COURSE DESCRIPTION FORM STRUCTURAL DYNAMICS
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, yderabad - 500 043 AERONAUTICAL ENGINEERING COURE DECRIPTION FORM Course Title Course Code Regulation Course tructure Course Coordinator Team
More informationCENTRAL TEXAS COLLEGE SYLLABUS FOR ENGR 2301 Engineering Mechanics - Statics. Semester Hours Credit: 3
CENTRAL TEXAS COLLEGE SYLLABUS FOR ENGR 2301 Engineering Mechanics - Statics Semester Hours Credit: 3 I. INTRODUCTION A. ENGR 2301, Engineering Mechanics Statics, is a three-semester hour course that is
More information2015 ENGINEERING MECHANICS
Set No - 1 I B. Tech I Semester Supplementary Examinations Aug. 2015 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Max. Marks: 70 Question
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
Course Title Course Code INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad - 500 043 CIVIL ENGINEERING COURSE DESCRIPTION MATHEMATICS-II A30006 Course Structure Lectures Tutorials
More informationGOPALAN COLLEGE OF ENGINEERING AND MANAGEMENT Department of Civil Engineering COURSE PLAN
Appendix - C GOPALAN COLLEGE OF ENGINEERING AND MANAGEMENT Department of Civil Engineering Academic Year: 2017-18 Semester: EVEN COURSE PLAN Semester: II Subject Code& Name: 15CIV23& Elements of Civil
More informationPESIT-BSC Department of Science & Humanities
Class No. 1. 2. 3. LESSON PLAN 15CIV13/23 ELEMENTS OF CIVIL ENGINEERING Course objectives: AND ENGINEERING MECHANICS The objectives of this course is to make students to learn basics of Civil Engineering
More informationSTATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ENGS STATICS
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE PREPARED BY: ARTHUR HURLBUT, Ph.D. P.E.(October 2006) UPDATED BY: MICHAEL J. NEWTOWN, P.E. (October 2006) REVISED BY:
More informationENGINEERING MECHANICS
ENGINEERING MECHANICS BASUDEB BHATTACHARYYA Assistant Professor Department of Applied Mechanics Bengal Engineering and Science University Shibpur, Howrah OXJFORD UNIVERSITY PRESS Contents Foreword Preface
More informationEngineering Statics PHYS 141 University Studies Program. Course Outline
Engineering Statics PHYS 141 University Studies Program Course Outline COURSE IMPLEMENTATION DATE: 2012 OUTLINE EFFECTIVE DATE: January 2016 COURSE OUTLINE REVIEW DATE: September 2021 GENERAL COURSE DESCRIPTION:
More informationUSHA RAMA COLLEGE OF ENGINEERING & TECHNOLOGY
Set No - 1 I B. Tech II Semester Supplementary Examinations Feb. - 2015 ENGINEERING MECHANICS (Common to ECE, EEE, EIE, Bio-Tech, E Com.E, Agri. E) Time: 3 hours Max. Marks: 70 Question Paper Consists
More informationDETAILED SYLLABUS FOR DISTANCE EDUCATION. Diploma. (Three Years Semester Scheme) Diploma in Architecture (DARC)
DETAILED SYLLABUS FOR DISTANCE EDUCATION Diploma (Three Years Semester Scheme) Diploma in Architecture (DARC) COURSE TITLE DURATION : Diploma in ARCHITECTURE (DARC) : 03 Years (Semester System) FOURTH
More informationSet No - 1 I B. Tech I Semester Regular Examinations Jan./Feb ENGINEERING MECHANICS
3 Set No - 1 I B. Tech I Semester Regular Examinations Jan./Feb. 2015 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Question Paper Consists
More informationCourse Syllabus for CIVL 2110 STATICS Spring
Course Syllabus for CIVL 2110 STATICS Spring 2016-2017 Instructor: email: ilias@ust.hk Dr. Ilias DIMITRAKOPOULOS room: 3583 tel: 2358-5975: office hours Wed, Fri: 11:00-12:00 Lectures: Wed, Fri 16:30-18:00
More informationAcademic Course Description
Academic Course Description BPH201 - ENGINEERING PHYSICS II BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BPH201 - ENGINEERING PHYSICS II
More informationReport College: Semester: Year: Public: Report ID:
Course Evaluation Report Report : Semester: Year: Public: Report ID: 300 008 True 8 08/0/009 10:8:4AM ZAP=141 Course=AME 113-100 Title=STATICS Instructor=Mrinal Saha s Enrollment Count:8 INDIV 5.000 5
More informationKLEF University, Guntur B.Tech II year, First semester
KLEF University, Guntur B.Tech II year, First semester-2011-12 Date: 04-07-2011 PROGRAM NAME Course name Course Coordinator Course Detail : ELECTRONICS AND COMPUTER ENGINEERING : Signals & Systems : Dr.K.S.Ramesh
More informationF R. + F 3x. + F 2y. = (F 1x. j + F 3x. i + F 2y. i F 3y. i + F 1y. j F 2x. ) i + (F 1y. ) j. F 2x. F 3y. = (F ) i + (F ) j. ) j
General comments: closed book and notes but optional one page crib sheet allowed. STUDY: old exams, homework and power point lectures! Key: make sure you can solve your homework problems and exam problems.
More informationCourse syllabus Engineering Mechanics - Dynamics
Course syllabus Engineering Mechanics - Dynamics COURSE DETAILS Type of study programme Study programme Course title Course code ECTS (Number of credits allocated) Course status Year of study Course Web
More informationSYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595. l. Course #: PHYSC NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR
SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595 l. Course #: PHYSC 121 2. NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR NAME OF COURSE ENGINEERING PHYSICS 1 WITH LAB 3. CURRENT DATE: SUMMER
More informationMARKS DISTRIBUTION AS PER CHAPTER (QUESTION ASKED IN GTU EXAM) Name Of Chapter. Applications of. Friction. Centroid & Moment.
Introduction Fundamentals of statics Applications of fundamentals of statics Friction Centroid & Moment of inertia Simple Stresses & Strain Stresses in Beam Torsion Principle Stresses DEPARTMENT OF CIVIL
More informationDepartment of Mechanical Engineering Course plan
Faculty of Engineering & Technology, SRM University, Kattankulathur 603203 School of Mechanical Engineering Department of Mechanical Engineering Course plan Course code : ME1002 Date : 19 th December 2013
More informationUniversity of Macau Department of Electromechanical Engineering MECH102 - Applied Mechanics Syllabus 1 st Semester 2011/2012 Part A Course Outline
University of Macau Department of Electromechanical Engineering MECH102 - Applied Mechanics Syllabus 1 st Semester 2011/2012 Part A Course Outline Compulsory course in Electromechanical Engineering Course
More informationTEMPLATE FOR COURSE SPECIFICATION
TEMPLATE FOR COURSE SPECIFICATION HIGHER EDUCATION PERFORMANCE REVIEW: PROGRAMME REVIEW COURSE SPECIFICATION This Course Specification provides a concise summary of the main features of the course and
More informationBHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME 302 THERMODYNAMICS
BME 302 - THERMODYNAMICS Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME 302 THERMODYNAMICS Third Semester, 2015-16 (ODd Semester)
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code ENGR-011 Course Outline of Record 1. Course Code: ENGR-011 2. a. Long Course Title: Statics b. Short Course Title: STATICS 3. a. Catalog Course Description: This course
More informationwhere G is called the universal gravitational constant.
UNIT-I BASICS & STATICS OF PARTICLES 1. What are the different laws of mechanics? First law: A body does not change its state of motion unless acted upon by a force or Every object in a state of uniform
More informationCOURSE CODE: GEE 212 COURSE TITLE: ENGINEERING MECHANICS NUMBER OF UNITS: 3 Units COURSE DURATION: Three hours per week
COURSE CODE: GEE 212 COURSE TITLE: ENGINEERING MECHANICS NUMBER OF UNITS: 3 Units COURSE DURATION: Three hours per week COURSE LECTURER: DR. BALOGUNAIZEBEOJE INCENT INTENDED LEARNING OUTCOMES At the completion
More informationTABLE OF CONTENTS. Preface...
TABLE OF CONTENTS Preface...................................... xiv 1 Introduction........................................ 1 1.1 Engineering and Statics.............................. 1 1.2 A Brief History
More informationIntroduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Monday / Thursday Sections. Fall '17.
Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Monday / Thursday Sections Fall 2017 All course materials are available on the RPI Learning Management System (LMS) website.
More informationFoundations and Applications of Engineering Mechanics
Foundations and Applications of Engineering Mechanics 4843/24, 2nd Floor, Ansari Road, Daryaganj, Delhi - 110002, India Cambridge University Press is part of the University of Cambridge. It furthers the
More informationENGINEERING MECHANICS
Set No - 1 I B. Tech II Semester Regular/Supply Examinations July/Aug. - 2015 ENGINEERING MECHANICS (Common to ECE, EEE, EIE, Bio-Tech, E Com.E, Agri. E) Time: 3 hours Max. Marks: 70 Question Paper Consists
More informationIntroduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Tuesday / Friday Sections. Spring '13.
Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Tuesday / Friday Sections Spring 2013 Back exams, HW solutions, and other useful links can be found at the following website:
More informationQuestions from all units
Questions from all units S.NO 1. 1 UNT NO QUESTON Explain the concept of force and its characteristics. BLOOMS LEVEL LEVEL 2. 2 Explain different types of force systems with examples. Determine the magnitude
More information(Autonomous/ Affiliated to Anna University, Chennai) COIMBATORE DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
(Autonomous/ Affiliated to Anna University, Chennai) COIMBATORE-641 032 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Semester III Academic Year: 2015-2016 Regulations 2014 COURSE PLAN Vision To
More informationJNTU World. Subject Code: R13110/R13 '' '' '' ''' '
Set No - 1 I B. Tech I Semester Supplementary Examinations Sept. - 2014 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Max. Marks: 70 Question
More informationSN QUESTION YEAR MARK 1. State and prove the relationship between shearing stress and rate of change of bending moment at a section in a loaded beam.
ALPHA COLLEGE OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING MECHANICS OF SOLIDS (21000) ASSIGNMENT 1 SIMPLE STRESSES AND STRAINS SN QUESTION YEAR MARK 1 State and prove the relationship
More informationSTATICS SECOND EDITION
Engineering Mechanics STATICS SECOND EDITION Michael E. Plesha Department of Engineering Physics University of Wisconsin-Madison Gary L. Gray Department of Engineering Science and Mechanics Penn State
More information2. a) Explain the equilibrium of i) Concurrent force system, and ii) General force system.
Code No: R21031 R10 SET - 1 II B. Tech I Semester Supplementary Examinations Dec 2013 ENGINEERING MECHANICS (Com to ME, AE, AME, MM) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions
More informationCE 200 Surveying Fall 2017
Department of Civil and Environmental Engineering CE 200 Surveying Fall 2017 Instructor: Dr. Laramie Potts Contact: email lpotts@njit.edu Office Hours in 2510 GITC: Monday 4:00 5:30 pm Classroom: CULM
More informationEngineering Statics and Dynamics PHYS 170 University Studies Program. Course Outline
Engineering Statics and Dynamics PHYS 170 University Studies Program Course Outline COURSE IMPLEMENTATION DATE: 2012 OUTLINE EFFECTIVE DATE: January 2016 COURSE OUTLINE REVIEW DATE: September 2021 GENERAL
More informationPhysics 2104A. Kinematics and Dynamics. Study Guide
Adult Basic Education Science Kinematics and Dynamics Prerequisite: Physics 1104 or Science 1206 Credit Value: 1 Text: Physics: Concepts and Connections. Nowikow et al.; Irwin, 2002 Science 10. Ritter
More informationCOURSE INFORMATON. EE529 Fall Assoc. Prof. Dr. Cahit Canbay. Assoc. Prof. Dr. Cahit Canbay
COURSE INFORMATON Course Title Analytical Foundations of Electromagnetic Theory Code Semester C +P + L Hour Credits ECTS EE529 Fall 3 + 0 + 0 3 7 Prerequisites EE323 Language of Instruction Course Level
More informationKINGS COLLEGE OF ENGINEERING ENGINEERING MECHANICS QUESTION BANK UNIT I - PART-A
KINGS COLLEGE OF ENGINEERING ENGINEERING MECHANICS QUESTION BANK Sub. Code: CE1151 Sub. Name: Engg. Mechanics UNIT I - PART-A Sem / Year II / I 1.Distinguish the following system of forces with a suitable
More informationfive moments ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2014 lecture ARCH 614
ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2014 lecture five moments Moments 1 Moments forces have the tendency to make a body rotate about an axis http://www.physics.umd.edu
More informationEngineering Mechanics Objective module 1 with solutions: A K GAIKAR
Engineering Mechanics Objective module 1 with solutions: A K GAIKAR 1. What is the branch of engineering mechanics which refers to the study of stationary rigid body? A. Statics B. Kinetics C. Kinematics
More informationMathematics. Statistics
Mathematics Statistics Table of Content. Introduction.. arallelogram law of forces. 3. Triangle law of forces. 4. olygon law of forces. 5. Lami's theorem. 6. arallel forces. 7. Moment. 8. Couples. 9. Triangle
More informationDescription Subject Teaching Methodology L T P C
Course/ Code Engineering Mechanics 3 1-3 Teaching Total contact hours - 64 Engineering Physics Course Objectives: The students completing this course are expected to understand the concepts of forces and
More informationCHEE 3321 (Required) Analytical Methods for Chemical Engineers
CHEE 3321 (Required) Analytical Methods for Chemical Engineers Catalog Data: Cr. 3. (3-0). Prerequisites: MATH 2433 or equivalent with consent of instructor. Linear algebra, analytical methods for solving
More informationGovernment of Karnataka Department of Technical Education Board of Technical Examinations, Bengaluru
Government of Karnataka Department of Technical Education Board of Technical Examinations, Bengaluru Title :APPLIED SCIENCE LAB Code : 15SC04P Semester : I / II Group : Core Teaching Scheme in Hrs (L:T:P)
More informationENGINEERING MECHANICS
ENGINEERING MECHANICS ENGINEERING MECHANICS (In SI Units) For BE/B.Tech. Ist YEAR Strictly as per the latest syllabus prescribed by Mahamaya Technical University, Noida By Dr. R.K. BANSAL B.Sc. Engg.
More informationGCSE. Additional Mathematics. (Amended June 2004) For first examination in 2005
GCSE Additional Mathematics in S P E C I F I C A T I O N (Amended June 2004) For first teaching from Autumn 2004 For first examination in 2005 iii FOREWORD This booklet contains CCEA s Additional Mathematics
More informationMechanics of Material 11/29/2017. General Information
General Information Assistant Lecturer: Asmaa Ab. Mustafa Email : asmaa.abdulmajeed@ishik.edu.iq Department : Civil Engineering Course Title : Engineering Mechanics I Code : Credit : 2 Office Hour : Monday
More informationMEC 205 D. Name of assessment Marks Topics Tentative date Duration Basic concepts, first law of thermodynamics, steady flow energy equation.
Faculty of Engineering & Technology, SRM University, Kattankulathur 603203 School of Mechanical Engineering Department of Automobile Engineering Course plan Date : 04 July 2012 Course code : ME 0201 Course
More informationUpon successful completion of this course, students should be competent to perform the following tasks:
Course Information Course Prefix/Number: PHY 221 Course Title: University Physics Lecture Hours/Week: 3.0 Lab Hours/Week: 3.0 Credit Hours/Semester: 4.0 VA Statement/Distance Learning Attendance Textbook
More information2016 ENGINEERING MECHANICS
Set No 1 I B. Tech I Semester Regular Examinations, Dec 2016 ENGINEERING MECHANICS (Com. to AE, AME, BOT, CHEM, CE, EEE, ME, MTE, MM, PCE, PE) Time: 3 hours Max. Marks: 70 Question Paper Consists of Part-A
More informationUniversity of Engineering and Technology, Taxila. Department of Civil Engineering
University of Engineering and Technology, Taxila Department of Civil Engineering Course Title: CE-201 Fluid Mechanics - I Pre-requisite(s): None Credit Hours: 2 + 1 Contact Hours: 2 + 3 Text Book(s): Reference
More informationHOUSTON COMMUNITY COLLEGE COURSE OUTLINE FOR Engineering Statics (ENGR 2301) Fall 2012 Class Number: 24432
HOUSTON COMMUNITY COLLEGE COURSE OUTLINE FOR Engineering Statics (ENGR 2301) Fall 2012 Class Number: 24432 Time and Location 9:00 AM 01:00 PM, Fridays, HCC Northwest College, Alief Branch, Room Number
More informationModesto Junior College Course Outline of Record PHYS 101
Modesto Junior College Course Outline of Record PHYS 101 I. OVERVIEW The following information will appear in the 2011-2012 catalog PHYS 101 General Physics: Mechanics 5 Units Prerequisite: Satisfactory
More informationMechanics. In the Science Program, Mechanics contributes to the following program goals described in the Exit Profile:
Mechanics Objectives: 00UR Discipline: Physics Ponderation: 3-2-3 Course Code: 203-NYA-05 Prerequisite: Sec. V Physics 534, Mathematics 536 (or equivalent) Course Credit: 2 2/3 Corequisite: 00UP (Calculus
More informationJNTU World. Subject Code: R13110/R13
Set No - 1 I B. Tech I Semester Regular Examinations Feb./Mar. - 2014 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Max. Marks: 70 Question
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: CODE NO. : SEMESTER: Two PROGRAM: AUTHOR: Aviation Technology Flight Douglas McKinnon DATE: Jan 2013
More informationFENG CHIA UNIVERSITY
FENG CHIA UNIVERSITY Fundamentals of Physics I (With Lab) PHYS114, Summer 2018 (May14-Jun15) Lecturer: TBA E-mail: TBA Time: Monday through Friday Contact hours: 60 (50 minutes each) Credits: 4 Office
More informationBRAZOSPORT COLLEGE LAKE JACKSON, TEXAS SYLLABUS PHYS MECHANICS AND HEAT
BRAZOSPORT COLLEGE LAKE JACKSON, TEXAS SYLLABUS PHYS 2325 - MECHANICS AND HEAT CATALOG DESCRIPTION: PHYS 2325 Mechanics and Heat. CIP 4008015403 A calculus-based approach to the principles of mechanics
More informationSciences Learning Outcomes
University Major/Dept Learning Outcome Source Biology, Molecular and Cell Students who successfully complete this major will be able to: * Describe basic biological concepts and principles * Appreciate
More informationModesto Junior College Course Outline of Record PHYS 142
Modesto Junior College Course Outline of Record PHYS 142 I. OVERVIEW The following information will appear in the 2011-2012 catalog PHYS 142 Mechanics, Heat, & Waves 5 Units Formerly listed as: PHYS -
More informationThe B.S.G.E. program is accredited by the Engineering Accreditation Commission of ABET,
Geomatics Engineering The program of study leading to the Bachelor of Science in Geomatics Engineering (B.S.G.E.) deals with designing solutions to measure, map, model, analyze and graphically display
More informationCity University of Hong Kong. Course Syllabus. offered by Department of Chemistry with effect from Semester B 2017/18
City University of Hong Kong offered by Department of Chemistry with effect from Semester B 2017/18 Part I Course Overview Course Title: Course Code: Course Duration: Credit Units: Level: Proposed Area:
More informationDept of ECE, SCMS Cochin
B B2B109 Pages: 3 Reg. No. Name: APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY SECOND SEMESTER B.TECH DEGREE EXAMINATION, MAY 2017 Course Code: BE 100 Course Name: ENGINEERING MECHANICS Max. Marks: 100 Duration:
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE CODE NO. : MCH110 SEMESTER: TWO
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: APPLIED MECHANICS CODE NO. : SEMESTER: TWO PROGRAM: AUTHOR: DATE: APPROVED: TOTAL CREDITS: PREREQUISITE(S):
More informationSYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo CURRENT DATE: Please indicate whether this is a NEW COURSE or a REVISION:
SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595 l. Course #: 2. NAME OF ORIGINATOR /REVISOR: PHYSC 143 Laurel Senft, Rob Applebaum, Eryn Klosko NAME OF COURSE Earth Science 3. CURRENT DATE:
More informationCURRICULUM B.TECH. CIVIL ENGINEERING (In Association with CADD CENTRE ) CHOICE BASED CREDIT SYSTEM
CURRICULUM B.TECH. CIVIL ENGINEERING (In Association with CADD CENTRE ) CHOICE BASED CREDIT SYSTEM STUDENTS LEARNING OUTCOMES The curriculum and syllabi of B.Tech.Civil Engineering Program (2017-18) conform
More informationPESIT- Bangalore South Campus Dept of science & Humanities Sub: Elements Of Civil Engineering & Engineering Mechanics 1 st module QB
PESIT- Bangalore South Campus Dept of science & Humanities Sub: Elements Of Civil Engineering & Engineering Mechanics 1 st module QB Sub Code: 15CIV13/23 1. Briefly give the scope of different fields in
More informationWhere, m = slope of line = constant c = Intercept on y axis = effort required to start the machine
(ISO/IEC - 700-005 Certified) Model Answer: Summer 07 Code: 70 Important Instructions to examiners: ) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
More informationCOURSE TITLE : THEORY OF STRUCTURES -I COURSE CODE : 3013 COURSE CATEGORY : B PERIODS/WEEK : 6 PERIODS/SEMESTER: 90 CREDITS : 6
COURSE TITLE : THEORY OF STRUCTURES -I COURSE CODE : 0 COURSE CATEGORY : B PERIODS/WEEK : 6 PERIODS/SEMESTER: 90 CREDITS : 6 TIME SCHEDULE Module Topics Period Moment of forces Support reactions Centre
More informationIntroduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Monday / Thursday Sections. Fall '10.
Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Monday / Thursday Sections Fall 2010 All course materials are available on the RPI Learning Management System (LMS) website.
More informationME 025 Mechanics of Materials
ME 025 Mechanics of Materials General Information: Term: 2019 Summer Session Instructor: Staff Language of Instruction: English Classroom: TBA Office Hours: TBA Class Sessions Per Week: 5 Total Weeks:
More informationModel Answers Attempt any TEN of the following :
(ISO/IEC - 70-005 Certified) Model Answer: Winter 7 Sub. Code: 17 Important Instructions to Examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer
More information: APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE
COURSE TITLE : APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIODS 1 Simple stresses
More informationAssignment No. 1 RESULTANT OF COPLANAR FORCES
Assignment No. 1 RESULTANT OF COPLANAR FORCES Theory Questions: 1) Define force and body. (Dec. 2004 2 Mks) 2) State and explain the law of transmissibility of forces. (May 2009 4 Mks) Or 3) What is law
More informationENGINEERING MECHANICS - Question Bank
E Semester-_IST YEAR (CIVIL, MECH, AUTO, CHEM, RUER, PLASTIC, ENV,TT,AERO) ENGINEERING MECHANICS - Question ank All questions carry equal marks(10 marks) Q.1 Define space,time matter and force, scalar
More informationSubject : Engineering Mechanics Subject Code : 1704 Page No: 1 / 6 ----------------------------- Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word
More informationSTATICS & DYNAMICS. Engineering Mechanics. Gary L. Gray. Francesco Costanzo. Michael E. Plesha. University of Wisconsin-Madison
Engineering Mechanics STATICS & DYNAMICS SECOND EDITION Francesco Costanzo Department of Engineering Science and Mechanics Penn State University Michael E. Plesha Department of Engineering Physics University
More informationCo-requisite: University Physics Lab I (PHYS 3013) Requisite: Calculus (MATH 3051 or equivalent)
UNIVERSITY OF PUERTO RICO RIO PIEDRAS CAMPUS COLLEGE OF NATURAL SCIENCES DEPARTMENT OF PHYSICS UNDERGRADUATE PROGRAM Title: University Physics I Code: PHYS 3011 Number of Credits: 3 Co-requisite: University
More informationoffered by Department of Chemistry with effect from Semester A 2018/19
SYL offered by Department of Chemistry with effect from Semester A 2018/19 This form is for the completion by the Course Leader. The information provided on this form is the official record of the course.
More informationELEMENTARY ENGINEERING MECHANICS
ELEMENTARY ENGINEERING MECHANICS Other title by the same author Applied Mechanics Made Simple (Heinemann: 'Made Simple' series) Other Macmllian titles of related interest Basic Engineering Mechanics J.
More information