SPECIFICATION. 1. Scope. 2. Product Identification M T (1) (2) (3) (4) 3. Shapes and Dimensions [Dimensions in mm]
|
|
- Shannon Glenn
- 5 years ago
- Views:
Transcription
1 SPECIFICATION 1. Scope This specification applies to to be delivered to user. 2. Product Identification M T (1) (2) (3) (4) (1) Product name (2) Shapes and dimensions : 1.6 x 0.8 x 0.8 (3) Impedance 601 : 600 Ω (4) Taping style T:taping, None:Bulk 3. Shapes and Dimensions [Dimensions in mm] A : 1.6 ± 0.15 mm B : 0.8 ± 0.15 mm C : 0.8 ±0.15 mm D : 0.3±0.20 mm
2 4. Electrical Characteristics 4-1 Electrical Spec. Customer Part Number Impedance Rdc(Ω) Rated Current Test Freq. Part No. (Ω) max (ma)max M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV M T MHz, 200mV When ordering, please specify tolerance and packaging codes. Ex : M Y-T Tolerance : Y= ±25%, N = 30% Packaging : Clear tape and reel { standard }. 2. Z: HP 4291A RF Impedance/Material Analyzer Rdc: Chen Hwa 502BC/HP4338B 3. Rated current: Applied the current to coils, the temperature rise shall not be more than Operating temperature range: -55 ~125 (including self-temperature rise) 5. Material List No. Part 1 Ferrite Substance 2 Silver electrode 3 Silver electrode 4 Cu plating 5 Ni plating 6 Sn plating Material NiO-Cuo-ZnO-Ferrite Ag Ag Cu Ni Sn
3 6. Reliability Test 6-1 Mechanical Performance ITEM Flexure Strength Vibration Specification The forces applied on the right conditions must not damage the terminal electrode and the ferrite Test Method Test device shall be soldered on the substrate Substrate dimension: 100 x 40 x 1.6mm Deflection: 2.0 mm Keeping time: 30 sec. Test device shall be soldered on the substrate Oscillatin frequency: 10 to 55 to 10 Hz for 1 min Amplitude: 1.5 mm Time: 2 hrs for each axis(x, Y & Z), total 6 hrs Resistance to Soldering Heat Appearance: No damage Pre-heat: 150, 1 min More than 75% of the terminal electrode Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free) should be covered with solder. Solder Temperature: 260±5 Impedance: within ±30% of initial value Immersion Time: 10±1 sec Solderability The electrodes shall be at lease 95% covered with new solder coating Pre-heating: 150, 1 min Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free) Solder Temperature: 245±5 Immersion Time: 4±1 sec Terminal Strength Test No split terminatin Test device shall be soldered on the substrate, then apply a force in the directin of the arrow. Force: 5N Keeping Time: 10±1 sec 6-2 Environmental Performance Item Specification Test Method Temperature Appearance: No damage One cycle: Cycle Impedance: within±30% of initial value Step Temperature( ) 1-55±3 Humidity Resistance Total: 100 cycles Temperature: 40±2 Relative humidity: 90~95% 25±2 125±3 25±2 Time(min)
4 6-2 Environmental Performance ITEM Specification Test Method High temperature Appearance: No damage Temperature: 125±3 resistance Impedance: within±30% of initial value Applied current: Rated Current/Time: 1000hrs Low temperature resistance Temperature: -55±3 Relative humidity: 0%/Time: 1000 hrs 7. Reflow Soldering Conditions Note: 1. Re-flow possible times: within 2 times 2. Nitrogen adopted is recommeneded while in reflow.
5 8. Packing Info 8-1 Cover Tape The force for tearing off cover tape is 10 to 100 grams in the arrow direction. 8-2 Packaging Q'ty 4000pcs/reel 8-3 Reel Dimensions Unit: mm A 178 N 60 W2 12
6 8-4 Tape Dimensions(mm) P P 0 P 1 Ko W Bo Ao t Symbol A0 B0 T Dimension W 8 P Recommended Pattern unit: mm A 0.7~0.8 B 1.8~2.0 C 0.6~ Note 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Do not knock nor drop. 3. all the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment agreed upon between you and us. 4. Please keep the distance between transformer/coil and other components.
SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More informationINPAQ Global RF/Component Solutions
MHC 1005-4532 S Series Specification Product Name Series High Current Chip Bead MHC S Series Size EIAJ 1005-4532 Chip Ferrite Bead for High Current (MHC S Series) Engineering Spec. INPAQ FEATURES Combination
More informationINPAQ Global RF/Component Solutions
MIP P Series Specification Product Name Series Power Inductor MIP P Series Size EIAJ Multilayer Power Inductor (MIP P Series) Engineering Spec. PART NUMBER AND CHARACTERISTICS TABLE INPAQ MIP-P series
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
More informationSPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000
Sunlord Specifications for Multi-layer Chip Ferrite Bead Page 1 of 16 SPECIFICATIONS Customer Product Name Sunlord Part Number Multi-layer Chip Ferrite Bead G Series Customer Part Number [ New eleased,
More informationProduct Dimension Recommended Solder Pad
1,45±0,2 Product Identification GMWI - 201209-1R0 M R 1 2 3 4 5 1 :Product Code 2 :Dimension Code (mm) 3 :Inductance 4 :Tolerance Code :N = ±30%,M = ±20% 5 :Code for Special Specification Product Dimension
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More informationApproval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationApproval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More informationWLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationWLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More informationWLPM Series SMD Molded Power Inductors
WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217 Features 1. Shielded construction. 2. Ultra
More informationShielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
More informationMicrowave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
More informationWLPN Series Shielded SMD Power Inductors
WLPN202012 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN202012 Series_V2.0 Sep. 2014 Features 1. Close magnetic loop with
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/16/2016 1/12 GmbH www.freltec.com SPECIFICATION Part Number 19C 03 * 151 * A50 D * Q * T04 _ Type Size Impedance Rated Current Material Toler ance Packing
More informationSafety Certificated Capacitors X2/Y3
Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)
More informationSB/PB Series. Multilayer Ferrite Chip Beads. [ PB Series for Large Current ] APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES
YAGEO COPOATION SMD INDUCTO/BEADS Multilayer Ferrite Chip Beads SB/PB Series [ PB Series for Large Current ] APPLICATIONS Prevention of high frequency EMI form computers, printers, VCs, TVs, wireless telephone
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 3/21/2017 1/12 GmbH www.freltec.com SPECIFICATION Part Number 198 05 * 151 * S * Q * E02 Type Size Nominal Impedance Material Rated Current Tolera nce
More informationApplications: 1808 N 100 J 202 C T. Size Dielectric Capacitance Tolerance Rated Voltage Termination
Features: High voltage in a given case size. High stability and reliability. How To Order: MC Multicomp Description: The middle and high voltage series MLCC is designed by a special internal electrode
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More informationYEAR DATE: DAY MONTH. TDK Corporation Sales. Engineering. Marketing Group. Business Group. Magnetics APPROVED CHECKED.
SPECIFICATION SPEC. No.C425NAA00007-1 DATE Sep. 9. 2015 To Xiamen Holder Electronics Co.,Ltd. CUSTOMER S PRODUCT NAME TDK S PRODUCT NAME THIN FILM INDUCTOR TFM252010ALM-MTAA Series RECEIPT CONFIRMATION
More informationMGB SERIES (Chip Ferrite Bead for GHz Range) Engineering Specification
MG SERIES (Chip Ferrite ead for GHz Range) Engineering Specification RoHS Features and Application.Effectively filtering capability over a wide range of frequency (Several MHz to GHz).Monolithic inorganic
More informationSMD Wire Wound Chip Inductors / NLD TYPE(For High Q)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications:
More informationReference Only. Spec. No. JENF243G 0004G-01 P 1 / 12. Ferrite Bead Inductor BL02/BL03 Series
Spec. No. JENF243G 0004G-01 P 1 / 12 1. Scope Ferrite Bead Inductor B02/B03 Series Reference Specification This reference specification applies Ferrite Bead Inductor (Radial Type). 2. Part Numbering (Ex.)
More informationMULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
More informationConfigurations: Dimension (mm) B (max) A (max) Item. Inductance Range. Item ISB ~ ISB ~ ISB ~ 1000.
SMT Shielded Power s ISB3, ISB4, ISB5 Configurations: FEATURES Magnetically shielded construction. Compact and thin. Wire burst resistant due to special construction. RoHS Compliant. APPLICATION DC-DC
More informationHigh Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
More informationMAG.LAYERS G M L B A - N 8
APPLIICATIION GMLB chip beads can be used in a variety of electronic applications including: Computers and Computer Peripherals Cellular Communication Equipment Digital Cameras Digital Televisions Audio
More informationMULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of
More information0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationSPECIFICATIONS. Endrich Bauelemente Vertriebs GmbH. Thick film chip thermistor TATEYAMA KAGAKU IND. CO., LTD. 1 / 7. Customer. Code No.
Customer Endrich Bauelemente Vertriebs GmbH 1 /7 SPECIFICATIONS Code No. Type: TFT6G(2.00mm1.25mm) (Sn Plating) TFT3G(1.60mm0.80mm) (Sn Plating) TFT16G(1.00mm0.50mm) (Sn Plating) If you find herein anything
More informationConfigurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
More informationM SERIES ULTRA HIGH Q CAPACITOR SPEC
FEATURES: - Ultra High-Q and low ESR - Extended working range for wireless products - Extended battery life of portable devices PART NUMBER DESCRIPTION 42 M 25 N R1 B C T Size Series Rated Voltage (VDC)
More informationShielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
More informationMULTILAYER CERAMIC CAPACITORS Microwave Series (RF) to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) 01005 to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice.
More informationCHIP FERRITE BEADS. Features. Applications. Ordering Information. Shape and Dimensions
CHIP FERRITE BEADS Features 1. Effective for suppressing noise at high frequency, from several MHz to several hundreds MHz. 2. Chip type is suited for preventing the abnormal oscillation in high frequency
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 4/14/2016 1/15 GmbH www.freltec.com SPECIFICATION Part Number 196 05 * 151 * S * J * E02 _ Type Size Impedance Material Tolera nce Packing Optional 196
More informationChip Type Y5U Temperature Characteristics
Chip Type Y5U Temperature Characteristics Features Dimensions Large capacitance in small size Temperature characteristics of Y5U (within +% to 56% in the range of 5 C to +85 C) Features equivalent to X7V.
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 4012X - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationMULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance
MULTILAYER CERAMIC CAPACITORS 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page of ASC_ HQ_Low ESR_(HH)_006N_AS Apr. 202 .
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More informationSUNSTAR 传感与控制 TEL: FAX: Hall Sensor As of Nov SUNSTAR 自动化
As of Nov. 2004 E-MAIL: INTRODUCTION is a magnetic sensor using Hall effect, generating output voltage directly proportional to magnetic field. FEATURE AND APPLICATION Feature - SAMSUNG is highly sensitive
More informationRF Transformer (Stabilized Matching Device) SMST15 series
1 Features RF Transformer Stabilized Matching Device is RF impedance matching components. You can adjust impedance matching easily between antenna and feeding point, when you use RF Transformer. RF Transformer
More informationMuti-Layer Thermistor
Document No TMTR-XXOS002A 1/10 1. Scope : This specification applies for the Lead-Free MTR series of Muti-Layer thermistor made by TA-I. 2. Construction: Protective Coating Sn Plating Ni Plating Ag Electrode
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationMULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page
More informationMultilayer Ceramic Capacitors High Capacitance Series
Applications: Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used.
More informationCHIP FERRITE INDUCTORS
CHIP FERRITE INDUCTORS Features. Perfect for high density surface mount applications since magnetic shield dliminates crosstalk. 2. Highly reliable in wide temperature and humidity range. Superior Q characteristics
More informationINPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationMULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without
More informationEN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at www.hest ore.hu. Description: MLCC consists of a conducting material and electrodes. To manufacture
More informationMULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_Low
More informationApplications: MCY 4C 3 B 103 K 500 C T. Two significant digits followed by no. of zeros. And R is in place of decimal point.
Description: WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce voltage concentrations by distributing voltage gradients throughout the entire
More informationRoHS Features and Application
MCM1012 SERIES LOW PROFILE TYPE (Chip Filter) RoHS Features and Application.Powerful components with composite co-fired material to solve EMI problem for high speed differential signal transmission line
More informationMULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
More informationMULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without
More informationMultilayer SMD Ceramic Capacitors General Purpose Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. MLCC is made
More informationSPECIFICATIONS OF CITILIGHT 1 / Scope of Application These specifications apply to chip type LED lamp, CITILIGHT, model CL-822 -U1D-T.
SPECIFICATIONS OF 1 / 11 1. Scope of Application These specifications apply to chip type LED lamp,, model CL-822 -U1D-T. 2. Part code C L - 8 2 2 - U 1 D - T Series 822 : White LED for general lighting.
More informationWW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationLead-Free Current Sensing Resistors RLS Series ( Halogen-Free )
page 1/8 1. Scope: This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free RLS series manufactured by TA-I TECHNOLOGY CO.,LTD. 2. Type Designation:
More informationS SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationMagnetic Sealing SMD Inductor
1. Scope This Specification is applied to the Pb free high current type SMD inductor for ZLRH1270CXXXXT. 2. Part Number Code ZLRH 1270 C 330 M T (1) (2) (3) (4) (5) (6) (1) Series Number: ZLMR-Magnetic
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Automotive Capacitor Arrays Series (MY) Qualified to 4 x 0402, 4 x 0603 Sizes NP0 & X7R Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change
More informationRS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
More informationMulti-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
More informationAXIAL LEADED INDUCTORS
AXIAL LEADED INDUCTORS ISO-900 Registered OPERATING TEMP -5~+5 C (Including self-generated heat) FEATURES Extremely reliable inductors that are ideal for automatic insertion Highly efficient automated
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction
More informationMultilayer Ferrite Chip Beads
Multilayer Ferrite Chip Beads Features Monolithic structure for closed magnetic path and high reliability Standard EIA/EIAJ chip sizes such as 0402/5, 0603/608, 0805/202, and 206/326 A complete set of
More information: 120% Rated Voltage. Capacitance Unit : pf Ex.: 2R0:2.0pF 100: : : Tolerance
CCT Series-High Capacitors Multilayer Ceramic Chip Capacitors [ High Capacitor ] CCT Series Middle (-) ratings from to and sizes from 0603 to 5. Features Special internal electrode design offers the highest
More informationCal-Chip Electronics, Incorporated TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
: The T Series is designed for hybrid circuit and low profile printed circuit board applications where inductance is to be minimized, or where substrate space is at a premium. They can be attached to substrates
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More informationWIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationMultilayer Chip Capacitors High Voltage
FEATURE Ceramic Body Inner Electrode (NiorPd) Outer Electrode Cu or Ag Ni Sn/Pb - Miniature Size - Highly Reliable Performance in High-Voltage - Industry Standard Size - Tape & Reel for Surface Mount Assembly
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES 7 8 9 Part name Material Flammability Housing Polyphenylenesulphide UL9V- Base element Ceramic Electrode g-pd cermet Resistive
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More informationMULTILAYER CERAMIC CAPACITORS General Purpose Series (4V to 100V) 0201 to 1812 Sizes NP0, X7R, Y5V, X6S & X5R Dielectrics RoHS Compliance
MULTILAYER CERAMIC CAPACITORS General Purpose Series (4V to 100V) 0201 to 1812 Sizes NP0, X7R, Y5V, X6S & X5R Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice.
More informationINPAQ. Specification RDP201208T-05EACME1BE. Product Name. RF Diplexer. Global RF/Component Solutions
RDP201208T-05EACME1BE Specification Product Name Series Part No RF Diplexer RDP2012 Series RDP201208T-05EACME1BE Size EIAJ 2012 RDP2012 SERIES (RF Diplexer) Engineering Specification Scope RDP series (RF
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationFERRITE CHIP BEADS SHAPE AND DIMENSIONS FEATURES APPLICATIONS ORDERING CODE CBY
FEITE CHIP BEADS OPEAATING TEMP. -4 +85 FEATUES Excellent solderability and high heat resistance for either reflow or wave soldering. No lead, ideal for SMT. Monotilithic inorganic material construction
More informationSFI Electronics Technology APPROVAL SHEET. Customer Information. Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name Part No. SFI ELECTRONICS TECHNOLOGY CORP. INC. SMD GDT series Lot
More informationITEM :CHIP FERRITE BEADS APPROVAL SHEET CHIP FERRITE BEADS CUSTOMER : DATE :
ITEM :CHIP FEITE BEADS ESTABLISHMENT 27. 3. 24 APPOVED EVISION 29. 4. 19 Series NO:B94192 APPOVAL SHEET CHIP FEITE BEADS CUSTOME : DATE : You can reapprove only the changed quality request recorded in
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationCFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant
RoHS compliant INTERNA STRUCTURE FEATURES RoHS compliant High-reliability 1 Part name Cover Slider Housing Material Polyamide Flammability U9V- Slider contact APPICATIONS Communication devices, Air-conditioning
More informationNo Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
More information