Shielded SMT Power Inductor SPRI2D10P Series

Size: px

Start display at page:

Download "Shielded SMT Power Inductor SPRI2D10P Series"

Stewart Parks
5 years ago
Views:

1 Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures the high density mounting configuration. Flat bottom surface ensures secure, reliable mounting. Application Low profile/ large current specifically suitable for Portable telephones, hard disk drives, PDA, DSC and other electronic equipments. SHAPES AND DIMENSIONS Unit A B C max D E H I J mm 3.2 ± ± inch ± ±0.008 Marking: Color Coding

2 Part : SPRI2D10P SERIES Version : AD Page : 2 / 6 PART NUMBER CODE SPRI 2D10 P 6R8 M A Series Name 2. Size Code 3. Type Code 4. Inductance (R=Decimal Point) Unit:uH 6R8 = 6.8uH 5. Inductance tolerance: M ±20%; N ±30%. 6. Soldering:A=Lead free ELECTRICAL CHARACTERISTICS 1. Test equipments 1.1. L,Idc : Agilent/HP 4284A Precision LCR Meter, 1KHz with 1V Rdc: Chroma Milli-ohm meter or equivalent. (Typ: ±30% tolerance) 1.3. Idc for Inductance drop 10% or 35% from its value without current Irms for a 25 or 40 rise above 25 ambient Operating temperature range -25 to 105

3 Part : SPRI2D10P SERIES Version : AD Page : 3 / 6 2. Part Number and Characteristics Table Part Number Inductance Inductance Rdc(Ω) Idc Typ (ma) Irms Typ (ma) (uh) /KHz Tolerance Typ L 10% L 35% T 25 T 40 Color Coding SPRI2D10P-R33 A 0.33 M, N Orange SPRI2D10P-R68 A 0.68 M, N White SPRI2D10P-1R0 A 1.00 M, N Gray SPRI2D10P-1R2 A 1.20 M, N Black SPRI2D10P-1R5 A 1.50 M, N Brown SPRI2D10P-1R8 A 1.80 M, N Red SPRI2D10P-2R2 A 2.20 M, N Orange SPRI2D10P-2R7 A 2.70 M, N Yellow SPRI2D10P-3R3 A 3.30 M, N Green SPRI2D10P-3R9 A 3.90 M, N Blue SPRI2D10P-4R7 A 4.70 M, N Violet SPRI2D10P-5R6 A 5.60 M, N Gray SPRI2D10P-6R8 A 6.80 M, N White SPRI2D10P-8R2 A 8.20 M, N Black SPRI2D10P-100 A 10.0 M Brown SPRI2D10P-120 A 12.0 M Red SPRI2D10P-150 A 15.0 M Orange SPRI2D10P-180 A 18.0 M Yellow SPRI2D10P-220 A 22.0 M Green SPRI2D10P-270 A 27.0 M Black SPRI2D10P-330 A 33.0 M Blue SPRI2D10P-470 A 47.0 M Black When ordering, please specify tolerance and packaging codes. Ex: SPRI2D10P-3R3MA; Tolerance : M = ±20%, N = ±30% ; Packaging: Clear tape and reel { standard }.

4 Part : SPRI2D10P SERIES Version : AD Page : 4 / 6 REEL DIMENSIONS AND PACKAGING QUANTITY P0 P P1 W Top view Bottom view Unit: mm TYPE W P P0 P1 REEL SIZE PCS / REEL SPRI2D10P mm (7 ) 1000

5 Part : SPRI2D10P SERIES Version : AD Page : 5 / 6 RELIABILITY AND TEST CONDITION Item ( 項目 ) Required Characteristics ( 要求 ) Test Method/Condition ( 測試方法 ) Solderability The metalized area must have 90% minimum solder coverage. Dip pads in flux and dip in solder pot ( 96.5 Sn/3.5 Ag solder) at 255 C ±5 C. Resistance to soldering heat Vibration Inductors shall be reflowed onto a PC board using 96.5 Sn/3.5 Ag solder paste. Solder process shall be at a maximum temperature of 260 C. For 96.5 Sn/3.5 Ag solder paste:>217 C for 90 seconds Solder specimen inductor on the test printed circuit board. Apply vibrations in each of the x, y and z directions for 2 house for a total of 6 hours. Frequency Amplitude : 10~50 Hz : 1.5mm High temperature resistance Inductors shall be subjected to temperature 105±2 for 50±12 hours. temperature and humidity for 2 hours. Static Humidity Inductors must not have a shorted or open winding. Inductors shall be subjected to temperature 85±2 and 90 to 95%RH for ten 24hours. temperature and humidity for 2 hours. Component adhesion (push test) Low temperature storage Resistance to solvent Inductors shall be subjected to 0.5Kg There must be no case deformation, change in dimensions, or obliteration of marking. Inductors shall be reflow soldered (255 C ±5 C for 10 seconds) to a tinned copper substrate. A force gauge shall be applied to the side of the component. The device must withstand the stated force without a failure of the termination. Inductors shall be subjected to temperature -25±2 for 48±12 hours. temperature and humidity for 1 to 2 hours. Inductors must withstand 6 minutes of alcohol or water. Inductors shall be subjected to 10 cycles to the following temperature cycle: 1 cycle Thermal shock min. 3 min min. temperature and humidity for 2 hours.

6 Part : SPRI2D10P SERIES Version : AD Page : 6 / 6 RECOMMENDED SOLDERING CONDITIONS Please use this product by reflow soldering 1. Recommended Reflow Pattern Reflow : until two times 10sec. Max Natural cooling sec. Max 60sec. Min 2. Iron Soldering Use a solder iron of less than 30W when soldering, do not allow the soldering iron tip directly touch the Ceramic body outside of terminal electrode. 5 seconds max. at Attention in Case of Using In case of using product, please avoid following matters: Splashing water or salt water Dew condenses Toxic gas (Hydrogen sulfide, Sulfurous acid, Chlorine, Ammonia) Vibrations or shocks which exceed the specified condition Please be careful for the stress to this product by board flexure or something after the mounting. 4. Other Operating temperature range : Ferrite Series :-25~+105 Storage condition : Temperature 20 ~25, Relative Humidity 40%~60% Recommended wire wound inductors should be used within 6 months from the time of delivery.

SMD Wire Wound Chip Inductors / NLD TYPE(For High Q)

SMD Wire Wound Chip Inductors / NLD TYPE(For High Q) .Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications: