Shielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
|
|
- Silas Welch
- 5 years ago
- Views:
Transcription
1 Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms current, +125 C to +165 C with derated current Storage temperature range: 4 C to +165 C Specifications(25 C): 1 Part Number 2 DCR SRF Isat(A) Irms(A) ±2% (Ohms) Typ 1% 2% 3% 2 C 4 C (uh) Nom Max (MHz) drop drop drop rise rise TL-42SG-1RM_ TL-42SG-1R5M_ TL-42SG- 2R2M_ TL-42SG-3R3M_ TL-42SG- 4R7M_ Tolerance - M= ± 2% Notes 1. TL- 42SG-1R5MC (For part numbering details see note 5 below) 2. tested at 1KHz,.1Vrms. 3. Isat is a DC current at which the inductance drops the specified amount from its original value with no current 4. Irms is a current that causes the specified temperature rise from 25 C ambient. 5. : TL-42SG-1R5MC TL- Inductor code, 42 - Series code, SG- SMD Green, 1R5-1.5 µh, M - Tolerance = ±2%, C- 7" reel Packaging: C= 7 machine ready. EIA-481embossed plastic tape (1 parts) B= Less than full reel machine ready D= 13 machine ready. EIA-481embossed plastic tape (35 parts) Termination: Matte tin over nickel over phospher bronze 3 ⁴ 324 SCOTT BLVD SANTA CLARA, CA 9554 TL-42SG Rev. 2-9/1/215 TEL: (48) FAX: (48) of 6
2 Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) Dimensions : (inch/mm) XXX.157 ± ± ± ±.3 Marking : "XXX" means the in uh Example : 1R means 1.uH 1R5 is 1.5uH 2R2 is 2.2uH Tolerance: M = +/- 2%.32 ±.2.82 ± max Recommended Land Pattern ± ± ± ± SCOTT BLVD SANTA CLARA, CA 9554 TL-42SG Rev TEL: (48) FAX: (48) of 6
3 Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) L vs Current Typical L vs Frequency µh I nductance (µh ) µh 3.3 µh 2.2 µh 1.5 µh 1. µh µh µh µh µh Pe rcen t of rate d Irm s Equivalent Series Resistance (Ω) Frequency (MHz) 25 C Typical Irms Derating Ambient temperature ( C) ESR Vs Frequency 4.7 µh 3.3 µh 2.2 µh 1.5 µh 1. µh Frequency (MHz) 324 SCOTT BLVD SANTA CLARA, CA 9554 TL-42SG Rev. 2-9/1/215 TEL: (48) FAX: (48) of 6
4 Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) Reflow Profile ( C) Time within 5 C of peak temperature (3 seconds) Ramp-Up 3 C/sec max Ramp-Down 6 C /sec max Peak temperature C Temperature 15 1 Preheat / Soak (6 12 seconds) Reflow Time above 217 C (6 15 seconds) Time (seconds) 3 of SCOTT BLVD SANTA CLARA, CA 9554 TL-42SG Rev. 2-9/1/215 TEL: (48) FAX: (48) of 6
5 Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) Reliability Test Test Items Low temperature storage High temperature storage Thermal shock Humidity resistance Drop Vibration Terminal strength Soldering heat resistance Test Conditions Criteria Placed at -4 C for 5 hours, then shall be within ±1% of the measured at room ambient temperature after placing 24 hours. Placed at +125 C for 5 hours, then shall be within ±1% of the measured at room ambient temperature after placing 24 hours. -4 C, 3min ~ +125 C, 3min, 5hours. shall be within ±1% of the Placed at 9 to 95%RH, +5 C for 5 shall be within ±1% of the hours, then measured at room ambient temperature after placing 24 hours. Insulation resistance>1mohm at DC Drop specimen three times on concrete shall be within ±1% of the floor from a height of 1 meter which mounted on test board. Frequency : 1 ~ 5Hz shall be within ±1% of the Amplitude : 1.5mm or 1G Sweep time : 1oct/min Test Directions : X,Y,Z Test Time : 2 hours each direction Add static load 4.9N(5gf) to inductor No detachment of terminal pin and no through hole of test board for 1±2 sec. breakage of wire. Dip inductor's terminal in solder bath of shall be within ±1% of the following conditions: 1) 26±5 C, 1±1sec, Appearance : No damage 2) 35±1 C, 3.5±.5sec 324 SCOTT BLVD SANTA CLARA, CA 9554 TL-42SG Rev. 2-9/1/215 TEL: (48) FAX: (48) of 6
6 Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) Packing : Tape & reel : 1pcs/reel Box : 5 reel = 4,pcs Carton : 1 boxes (4reel)= 4,pcs Reel dimensions(mm) A B C D E Tape dimensions(mm) W A B K E F P P D T SCOTT BLVD SANTA CLARA, CA 9554 TL-42SG Rev. 2-9/1/215 TEL: (48) FAX: (48) of 6
INPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationWIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
More informationCHIP FERRITE INDUCTORS
CHIP FERRITE INDUCTORS Features. Perfect for high density surface mount applications since magnetic shield dliminates crosstalk. 2. Highly reliable in wide temperature and humidity range. Superior Q characteristics
More informationINPAQ Global RF/Component Solutions
MIP P Series Specification Product Name Series Power Inductor MIP P Series Size EIAJ Multilayer Power Inductor (MIP P Series) Engineering Spec. PART NUMBER AND CHARACTERISTICS TABLE INPAQ MIP-P series
More informationQF K A B C D A : Series Name. D : Inductance Tolerance. ( K=±10% ) B : Dimension. C : Inductance. (220uH ) CIRCUIT
SPECIFICTION HF COMPLINT 1.MECHNICL & DIMENSIONS B B (UNIT: mm) 5.2±.5 4.5±.5 C 5.8±.5 D D a 1.5ref 5.5ref C b c 2.15ref 1.7ref b CIRCUIT c a S PCB Layout F 2.ELECTRICL REQUIREMENTS: PRMETER SPECIFICTION
More informationWLPN Series Shielded SMD Power Inductors
WLPN202012 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN202012 Series_V2.0 Sep. 2014 Features 1. Close magnetic loop with
More informationWLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationSMD Wire Wound Chip Inductors / NLD TYPE(For High Q)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications:
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationShielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More informationSPECIFICATION. TEST INSTRUMENTS CH-1062A LCR METER CH-502BC IMPEDANCE METER I-sat 2.7 typ Amps 90% L0 CH-3302 LCR METER + CH-1320 BIAS Irms ΔT 40
C rightek (Europe) Limited SPECIFICTION HF COMPLINT 1.MECHNICL & DIMENSIONS (UNIT: mm) C 10.0max J D 5.0ref 151 E F 2.0ref 7.6ref J 17.5max a 2.9ref b 7.0ref c 5.4ref REMRK CIRCUIT c S F a b a PC Layout
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More informationWLPM Series SMD Molded Power Inductors
WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217 Features 1. Shielded construction. 2. Ultra
More informationApproval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 4012X - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationApproval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationConfigurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
More information1/10 FEATURES HOW TO ORDER DIMENSIONS
OUTLINE Wire wound chip inductor is a perfect combine by means of combining high precision coil framework with superb wound technology.comparable with traditional inductor, it is improved technology, reduced
More informationConfigurations: Dimension (mm) B (max) A (max) Item. Inductance Range. Item ISB ~ ISB ~ ISB ~ 1000.
SMT Shielded Power s ISB3, ISB4, ISB5 Configurations: FEATURES Magnetically shielded construction. Compact and thin. Wire burst resistant due to special construction. RoHS Compliant. APPLICATION DC-DC
More informationWLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
More informationMagnetic Sealing SMD Inductor
1. Scope This Specification is applied to the Pb free high current type SMD inductor for ZLRH1270CXXXXT. 2. Part Number Code ZLRH 1270 C 330 M T (1) (2) (3) (4) (5) (6) (1) Series Number: ZLMR-Magnetic
More informationSMD Shielded Power Inductor. TIS8D43GS Series. Features. Applications. Dimensions
SMD Shielded Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter of portable equipment Camcorder, LCD television
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationSPECIFICATION PARAMETER SPECIFICATION CONDITION TEST INSTRUMENTS
rightek (Europe) Limited 1. MECHNICL & DIMENSIONS (UNIT: mm) 4R7 3R3 壮嘉雯 SPECIFICTION C a b c HF COMPLINT 7.6 Max 6.8 Max 3.2Max D 2.9±0.5 E 1.6±0.5 2.5 ref 3.7 ref 3.5 ref PC Pattern c Equivalent Circuit
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationRS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
More informationProduct Dimension Recommended Solder Pad
1,45±0,2 Product Identification GMWI - 201209-1R0 M R 1 2 3 4 5 1 :Product Code 2 :Dimension Code (mm) 3 :Inductance 4 :Tolerance Code :N = ±30%,M = ±20% 5 :Code for Special Specification Product Dimension
More informationCHIP FERRITE BEADS. Features. Applications. Ordering Information. Shape and Dimensions
CHIP FERRITE BEADS Features 1. Effective for suppressing noise at high frequency, from several MHz to several hundreds MHz. 2. Chip type is suited for preventing the abnormal oscillation in high frequency
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationINPAQ Global RF/Component Solutions
MHC 1005-4532 S Series Specification Product Name Series High Current Chip Bead MHC S Series Size EIAJ 1005-4532 Chip Ferrite Bead for High Current (MHC S Series) Engineering Spec. INPAQ FEATURES Combination
More informationNTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More information127 ( ) 129 ( ) 7,50 [0,295] 2,20 [0,087] 2,80 [0,110]
MA Series A FEATURES Dual winding shielded inductor can be used as single/dual/coupled inductor or : transformer Operating Temperature range from -0 C to +5 C (Including Self-heating) 60 C reflow peak
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationSPECIFICATION FOR APPROVAL
Laird Technologies,Co., Ltd. Customer : All Manufacturer : Laird Technologies Co.,Ltd. Product : Laird P/N : MGV2Series Customer P/N : N/A Issued Date : 8.2.8 Rev : A Customer Response Approved By: Signature:
More informationRS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
More informationSMD 3R3 3R3. (Unit: mm) (6) (1) (1) (4) Choke; Dimension (2) (3) (4) (5) (6) Production Inductance. A,B,C,D...T...etc., etc. N:±30% Unit A 7.
. Scope This is applied to the Pb freee high current type SMD inductor for ZLRH6D8CXXXXX Series.. Part Number Code ZLRH 6D8 C R M T () () () () () () (6) () () () () (6) Series Number: ZLMR Magnetic bead;
More informationCurrent Sensing Resistor Shunt Type >SMS Series
Page: 1 of 6 General Chip size from 3921 to 5931. Resistance value from 0.2m to 3m Low thermal EMF. Low TCR. Lead free, RoHS compliant for global. pplications and halogen free. pplication Switching model
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationTEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationSFI Electronics Technology APPROVAL SHEET. Customer Information. Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name Part No. SFI ELECTRONICS TECHNOLOGY CORP. INC. SMD GDT series Lot
More informationAPPLICATIONS Wireless communication equipment and various types of general electronic equipment; Other electronic equipment including HDDs and ODDs.
WIRE WOUND CHIP FERRITE INDUCTORS FEATURES ature size, suitable for SMT; Using terminal electrode structure to restrain the parasitic component effect quite caused by lead; low DC resistance, high current
More informationSURFACE MOUNT RESISTOR RM Series: Thick Film 0.01~100M Ω RoHS
RM Series: Thick Film 0.0~00M Ω RoHS INTRODUCTION RFE International, Inc. offers a wide range of chip resistors to meet your application requirements. They are made with metal glazed thick film on a high
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationSURFACE MOUNT RESISTOR RM Series: Thick Film 0.01~100MΩ RoHS
RM Series: Thick Film 0.0~00MΩ RoHS INTRODUCTION RFE International, Inc. offers a wide range of chip resistors to meet your application requirements. They are made with metal glazed thick film on a high
More informationAPPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
More informationMetal Oxide Varistor for Automotive:TVM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. High surge suppress capability for automotive application (load dump) 3. No temperature derating up to 125 C 4. Bidirectional and symmetrical V/I characteristics
More informationAxial Leaded Power Inductors
Type SC, SC, SC, SC Series Type SC, SC, SC, SC Series Tyco quality and reliability are guaranteed in this range of insulated and shielded RF Inductors. The insulated range has a self-extinguishing polyolefin
More informationTechnical Data Sheet Side View LEDs (Height 0.6mm)
Features Side view white LED White SMT package Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant
More informationINPAQ. Specification RDP201208T-05EACME1BE. Product Name. RF Diplexer. Global RF/Component Solutions
RDP201208T-05EACME1BE Specification Product Name Series Part No RF Diplexer RDP2012 Series RDP201208T-05EACME1BE Size EIAJ 2012 RDP2012 SERIES (RF Diplexer) Engineering Specification Scope RDP series (RF
More informationPREJECTION INDUSTRIAL CORP. 百泉工業股份有限公司
: 1 OF 11 1. Features High performance (Isat) realized by metal dust core. Performance low resistance,high current rating. Low loss realized with low DCR. Frequency range : up to (1.0 MHz). 100% lead (pb)
More informationSMT Chip EMI Suppressors
M A G N E T I C S SMT Chip EMI Suppressors MB Series n Surface Mount Chip EMI Suppressors PACKAGING QUANTITIES Size Code T(78mm [7.008 inches] reel dia.) MB0 00 pcs/reel MB0 00 pcs/reel MB6 00 pcs/reel
More informationResistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
More informationCurrent Sensing Resistor Shunt Type >SMS Series. General. Application
Page: 1/ 7 General Chip size from 2512 to 5931 Resistance value from 0.2m to 4m Low thermal EMF Low TCR Lead free, RoHS compliant for global pplications and halogen free pplication Switching model power
More informationMAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
MAU Series W, Miniature SIP, Single & DC/DC s Key Features Efficiency up to 0 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0 to UL 9V-0 Package
More informationMolding Power Inductor
Marking Outline: Magnetic shielded structure: excellent resistance to electro magnetic interference(emi). A composite structure, ultra low buzz noise. Low loss, high efficiency, wide application frequency.
More information/ NTSSeries NTFSeries Temperature cycle : 1000 cycles
/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle
More informationSPECIFICATION S L A B C D. Inductor Unshielded SMD S L. Brightek (Europe) Limited 1.MECHANICAL & DIMENSIONS
33 rightek (Europe) Limited 1.MEHNIL & DIMENSIONS 33 SPEIITION D E E D a (UNIT: mm) 6.±.2 E b c H OMPLINT 6.±.2 4.5±.1 2.6±.4 1.7±.3 8.5MX 2.ref 2.ref 6.2ref a b a c P Layout P Layout 2.ELETRIL REQUIREMENTS
More informationSuper High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More information50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
More informationMAU200 Series. 1W, High Isolation SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
Component Distributors, Inc. ~ www.cdiweb.com ~ sales@cdiweb.com ~ -0--33 W, High Isolation SIP, Single & DC/DC s Key Features Efficiency up to 00 Isolation MTBF >,000,000 Hours Low Cost Input, and Output
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationACX Advanced Ceramic X
LF 2012 Series Multilayer Chip Low-Pass Filters Features Monolithic structure replacing two inductors and five capacitors. RoHS compliant Applications 0.8-6GHz wireless communication systems, including
More informationSMD. (Unit: mm) (1) (1) (6) (4) Choke; (2) (3) (4) (5) (6) Dimension. Production Inductance. A,B,C,D...T...etc., etc. N:±30% Unit A 5.
Part : HD8C0MT Series. Scope This is applied to the Pb freee high current type SMD inductor for HD8CXXXXX Series.. Part Number Code H D8 C 0 M T () () () () () () (6) () () () () (6) Series Number: ZLMR
More informationEVERLIGHT ELECTRONICS CO., LTD.
Features Top View White LEDs Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering ESD protection Pb-free The product itself will remain within RoHS compliant
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationNo Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
More informationSPECIFICATION FOR APPROVAL
F, NO. 16, Sec. 2 Chung Yang S Rd., Peitou, Taipei, Taiwan. TEL : 88622891202, 886228952201 FAX : 88622891206, 886228956207 www.txccorp.com SPECIFICATION FOR APPROVAL CUSTOMER : PRODUCT TYPE : SMD SEAM
More informationFrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance
More informationFP4 High current power inductors
High current power inductors Effective December 015 Supersedes March 007 Product description High current carrying capacity Inductance range from 0.090uH to 0.00uH Current range 0 to 7 mps 10. x 6.8mm
More informationMultilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
More information3R3K SPECIFICATION FOR APPROVAL. Wound Chip Inductor. Ⅰ. Configuration and dimensions: Ⅲ. General specification: REF. : WL (Series) PROD.
SPEIFIIO FOR PPROVL Ⅰ. onfiguration and dimensions: ME REV. 201715-L PE 1/8 Marking Inductance code H F F E I I ( P Pattern ) 4. ±0.3 3.20 ±0.2 3.20 ±0.2 4.20 ±0.2 E 1.20 F +0.3-0.0 2.20 H 1.60 Unit:m/m
More informationDATA SHEET WIEGAND WIRE SENSOR WS-UTS-4-U0, WS-UFS-4-U0
Wiegand Wire Sensor for energy harvesting multiturn encoders using the Wiegand effect to generate energy from a rotating magnetic field 1 Optimized for operation with the multiturn counter module ic-pmx
More informationCFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant
RoHS compliant INTERNA STRUCTURE FEATURES RoHS compliant High-reliability 1 Part name Cover Slider Housing Material Polyamide Flammability U9V- Slider contact APPICATIONS Communication devices, Air-conditioning
More informationBOURNS INDUCTIVE COMPONENTS
HISTORY LIST REV. DTE DESRIPTION PPROVED HEKED DRWN 0091008 Released 0100511 Modify the operature temperature 01014 Modify the specification form D 010611 dd Inductance 181Y E 015084 Modify Reliability
More information3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
More informationAXIAL LEADED INDUCTORS
AXIAL LEADED INDUCTORS ISO-900 Registered OPERATING TEMP -5~+5 C (Including self-generated heat) FEATURES Extremely reliable inductors that are ideal for automatic insertion Highly efficient automated
More informationFixed Voltage Q2L Series 3.3x3.3 QFN
RoHS Pb e3 Fixed Voltage Q2L Series are uni-directional SIDACtor devices designed to protect SLICs (Subscriber Line Interface Circuit from damaging overvoltage transients. The series provides single line
More informationPRODUCT SPECIFICATION
CONNECTOR CONNECTOR 1 of 6 CONNECTOR 1.0 SCOPE This Product Specification covers the dip type for 13pins slimline SATA receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMER(S)
More informationProdukt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
More informationMain Applications Entertainment Lighting Commercial Lighting Indoor Lighting Outdoor Lighting
ProLight PK2E-5LPE-M 5W PC Magenta Power LED Technical Datasheet Version: 1.0 Features 100% foot print compatible with Cree XP-C / XP-E / XP-G Best thermal material solution of the world Best Moisture
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More information0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
More informationM SERIES ULTRA HIGH Q CAPACITOR SPEC
FEATURES: - Ultra High-Q and low ESR - Extended working range for wireless products - Extended battery life of portable devices PART NUMBER DESCRIPTION 42 M 25 N R1 B C T Size Series Rated Voltage (VDC)
More information