BOURNS INDUCTIVE COMPONENTS

Transcription

1 HISTORY LIST REV. DTE DESRIPTION PPROVED HEKED DRWN Released Modify the operature temperature Modify the specification form D dd Inductance 181Y E Modify Reliability test and Package weight Modify the D picture F Modify the specification form

2 Ⅰ. onfiguration and dimensions: REV PGE 1 6R I H D E D R G I 5.80 ± ±0..80 ±0. ( P Pattern ) Unit:m/m D E G H I R ref. 6.0 ref..0 ref..0 ref. Ⅱ. Description: a. Ferrite drum core construction. b. Magnetically shielded. c. Enamelled copper wire:h class d. Product weight:0.8g(ref.) e. Moisture sensitivity Level 1 f. Products comply with RoHS' requirements g. Halogen free available Temperature Rising rea +4.0 / sec max. Peak Temp:50 max. Max. Peak Temp - 5 :0sec max. Max time above 17 :60sec~150sec max. Preheat rea 150 ~ 00 / 60 ~ 10sec Reflow rea +.0 / sec max. Forced ooling rea -(1.0 ~ 5.0) / sec max. Ⅲ. General specification: a. Storage temp.: b. Operating temp.: (Temp. rise included) c. Resistance to solder heat:50.10 secs. Temperature ( ) sec~10sec 60sec max. 60sec~150sec Peak Temperature: Time ( seconds ) 00 50

3 Ⅳ. Electrical characteristics: REV PGE Part No. SRR508-R6Y SRR508-R0Y SRR508-4RY SRR508-5RY SRR508-6RY SRR508-8RY SRR Y SRR508-10Y SRR Y SRR Y SRR508-0Y SRR508-70Y SRR508-0Y SRR508-90Y SRR Y SRR Y SRR Y SRR508-80Y SRR Y SRR Y SRR508-1Y SRR508-1Y SRR Y Inductance ( μh ).6 ±0%.0 ±0% 4. ±0% 5. ±0% 6. ±0% 8. ±0% 10.0 ±0% 1.0 ±0% 15.0 ±0% 18.0 ±0%.0 ±0% 7.0 ±0%.0 ±0% 9.0 ±0% 47.0 ±0% 56.0 ±0% 68.0 ±0% 8.0 ±0% ±0% ±0% 0.0 ±0% 0.0 ±0% ±0% ). Inductance test freq. : 100kHz / 0.1V ). SRF (MHz) RD (Ω) max Irms () Isat ().70 SRR Y ±0% ). Electrical specifications at 5 Irms ase on temp rise 0 max. 4). Isat ase on L/L0=5%

4 REV PGE Ⅴ. urve: Inductance(uH) R D urrent (m)

5 Ⅵ. Packaging information: ( 1 ) onfiguration T REV PGE 4.0±0.5 over tape N G Embossed carrier arrier tape width : D D End P:1 m/m 4 m/m Start 6R 6R 6R 6R Leader no component 00 m/m min. omponents User direction of feed Trailer no component 400 m/m min. ( ) Dimensions Unit:m/m Style D G N T ±0.8 1± ± ( ) Q'TY & G.W. Per package Series Q'TY (pcs) Inner : Reel G.W. (gw) Style Q'TY (pcs) Outer : arton G.W. (Kg) Size (cm) SRR508 SRR , x 41 x 4 1, , x 7 x

6 Ⅶ. Reliability test: REV PGE 5 Item Reference documents Test ondition Test Specification 1.High Temperature Exposure MIL-STD-0 Method 108.Temperature ycling JESD- 104.iased Humidity Test MIL-STD-0 Method 10 4.Operational Life JESD External Visual 6.Physical Dimensions 7.Resistance to solvents JESD- 101 & MIL-STD-88 Method 009 JESD- 100 MIL-STD-0 Method 15 8.Vibration Test MIL-STD-0 Method 04 9.Resistance To MIL-STD-0 Method 10 Soldering Heat Test & J-STD00D.1 10.Saturation urrent 11.Over load JIS 646 & User SPE. JIS 646 & User SPE. 1.Temperature: 15±.Time:96± hours. 1.Temperature: -40 ~ +15.Number of cycle:100 cycle.dwell time:0 minutes 1.Temperature:85±.Humidity: 85% RH..Time:96± Hours Inspect product constructions, marking and workmanship. Verify physical dimensions to the applicable product detail specification. Immerse into solvent for ±0.5 minutes & brush 10 times for cycles. 1.Frequency and mplitued : Hz, 1.5 mm..direction:x, Y, Z.Test duration: hours for each direction, 6 hours in total. 1.Highest temperature: 50±5..Time(temp. 17 ):60~150 Seconds..IR reflow times: times. 1.pplied rated current for 5 seconds..saturation current 1.pplied one and half rated current for a period of 5 minutes..rated current 1.pplied rated current for 10 minutes. 1.Temperature Rise JIS 646 &.Temperature measure by digital surface urrent User SPE. thermometer..irms current 1.Solderability Test 14.Electrical haracteriazation J-STD-00 & JESD- 10 MIL-STD-0 Method 04 & User SPE. 1.aking in pre-testing: 150±5 / 16Hours±0 min..peak temperature:40±5.time(temp. 17 ):60~150 seconds. 4.IR reflow times:1 time. 1.Operating temperature:-40 ~15.Room temperature:5. 1.Products shall be mounted on SPE. P 15.Drop NS-654 & G/T 4.8 and dropped down from a height of 1m.Drop total time:6 times (Every side of sample drop times) 16.Terminal Strength Test IE Temperature: 15 (Temp. rise included).time:96± hours..rated current 1.pply push force to samples mounted on P..Force of 1.8 kg for 60±1 seconds. 1.No pollution on the surface of products..lear marking..no crack. Per product specification standard 1.No body change in apperarance..no marking blurred..inductance shall not change Inductance shall not drop more than 5% No electrical or mechanical damage Surface temperature rise is less than 0 max. More than 95% soldering coverage min on terminations. 1. dhesion on P shall be enough.. Product appearance shall not break.. No electrical damage. fter test, inductors shall be no mechanical damage.