SMT Chip EMI Suppressors

Transcription

1 M A G N E T I C S

2 SMT Chip EMI Suppressors MB Series n Surface Mount Chip EMI Suppressors PACKAGING QUANTITIES Size Code T(78mm [7.008 inches] reel dia.) MB0 00 pcs/reel MB0 00 pcs/reel MB6 00 pcs/reel MB 00 pcs/reel MB6 00 pcs/reel MB8 0 pcs/reel Description Series Impedance Range Circuit Page MB0 ~ 0 - MB0 ~ 0 - Chip EMI Suppressors MB6 9 ~ 0-6 MB ~ -6 MB6 ~ -8 MB8 70 ~ 0-8 TSC Electronics, Ltd. Tel: () -78 Fax: ()

3 Surface Mount Chip EMI Suppressors MB0, MB0 Series General Specifications Impedance Range: Storage Temp: Operating Temp: Resistance to Solder Heat: Resistance to Solvent: 7 Ohms to 0 Ohms - C to + 8 C - C to + 8 C C, 0 Seconds Per MIL-STD-F RECOMMENDED PRINTED CIRCUIT BOARD PATTERNS A Chip Bead Solder Land A B C MB inches 0.08 inches 0.07 ~ inches B C MB0 Pattern 0.09 inches Solder Resist 0.09 inches ~ 0.7 inches Description Part Number Impedance Z ( Ω) ± % at MHZ Resistance Rdc. Max. ( Ω) Rating Current Max (ma).0"±.0 MB "±.006.0"±.0 MB0-0. External Electrode.0"±.008 Ferrite MB MB "±.008 MB0-0.08"± "±.008 MB External Electrode.0"±.008 Ferrite MB MB TSC Electronics, Ltd. Tel: () -78 Fax: () -6

4 Surface Mount Chip EMI Suppressors MB0, MB0 Series Impedance vs. Frequency Curves 0 (Ω) MB0-0 0 (Ω) MB0-0 (Ω) MB0- Z Z Z XL 0 R XL 0 R XL 0 R (Ω) MB0-0 0 (Ω) MB0-0 (Ω) MB0- Z Z 0 Z R 0 XL 0 0 R 0 XL 0 0 R XL (Ω) MB0-00 (Ω) MB0-0 Z 0 Z 0 R XL 0 0 R XL TSC Electronics, Ltd. Tel: () -78 Fax: ()

5 Surface n Mount Chip EMI Suppressors MB6, MB Series Surface Mount Chip EMI Suppressors General Specifications Impedance Range: Storage Temp: Operating Temp: Resistance to Solder Heat: Resistance to Solvent: 7 Ohms to 0 Ohms - C to + 8 C - C to + 8 C C, 0 Seconds Per MIL-STD-F RECOMMENDED PRINTED CIRCUIT BOARD PATTERNS A Chip Bead Solder Land A B C MB inches inches 0. ~ 0. inches B C MB Pattern 0.07 inches Solder Resist inches 0. ~ 0. inches Description Part Number Impedance Z ( Ω) ± % at MHZ Resistance Rdc. Max. ( Ω) Rating Current Max (ma) MB "±.008 MB "±.008.0"±.008 MB6- MB External Electrode.0"±.008 Ferrite MB6- MB MB "±.008.6"±.008.0"±.008 MB External Electrode.0"±.008 Ferrite MB TSC Electronics, Ltd. Tel: () -78 Fax: () -6

6 Surface Mount Chip EMI Suppressors MB6, MB Series Impedance vs. Frequency Curves 0 (Ω) MB (Ω) MB6- (Ω) MB6- Z XL 0 0 Z XL 0 Z XL R R 0 0 R (Ω) MB (Ω) MB6-0 (Ω) MB6-0 Z R XL Z Z 0 XL 0 XL 0 0 R 0 0 R (Ω) MB6-0 0 (Ω) MB- 0 (Ω) MB-0 0 Z XL 0 Z XL 0 Z XL R R 0 0 R 0 0 TSC Electronics, Ltd. Tel: () -78 Fax: ()

7 Surface Mount Chip EMI Suppressors MB6, MB8 Series Surface Mount Chip EMI Suppressors General Specifications Impedance Range: Storage Temp: Operating Temp: Resistance to Solder Heat: Resistance to Solvent: 7 Ohms to 0 Ohms - C to + 8 C - C to + 8 C C, 0 Seconds Per MIL-STD-F RECOMMENDED PRINTED CIRCUIT BOARD PATTERNS A Chip Bead Solder Land A B C MB inches inches 0.7 ~ 0.6 inches B C MB8 Pattern 0.07 inches Solder Resist inches 0.7 ~ 0.6 inches Description Part Number Impedance Z ( Ω) ± % at MHZ Resistance Rdc. Max. ( Ω) Rating Current Max (ma).06"±.008 MB "± "±.008 MB External Electrode.0"±.008 Ferrite MB MB "±.008."± "±.008 MB External Electrode.0"±.008 Ferrite MB MB TSC Electronics, Ltd. Tel: () -78 Fax: () -6

8 Surface Mount Chip EMI Suppressors MB6, MB8 Series Impedance vs. Frequency Curves 0 (Ω) MB6-0 0 (Ω) MB6-0 0 (Ω) MB6- Z Z Z 0 XL 0 XL 0 XL R 0 0 R 0 0 R (Ω) MB (Ω) MB8-0 (Ω) MB8- Z Z Z 0 XL 0 XL 0 XL R 0 0 R 0 0 R (Ω) MB8-0 Z XL R TSC Electronics, Ltd. Tel: () -78 Fax: ()

9 Surface Mount Chip EMI Suppressors Performance and Test Conditions Criteria Performance Parameters Operating temperature range Storage temperature and humidity ranges - to +8 C C max., 70% RH max. Soldering heat resistance No cracking of the chip may occur. Solder must cover greater than 7% of the total surface area of the terminal electrode. Impedance must be within +/- % of the initial value. Preheat: C, seconds Solder: H6A Solder temperature: +/- C Flux: Resin Dip time: 0 +/- 0. seconds Dipping Natural cooling C C seconds 0 +/- 0. seconds Solderability New solder must cover greater than 90% of the total surface area of the terminal electrode. Preheat: C, seconds Solder: H6A Solder temperature: +/- C Flux: Rosin Dip time: +/- seconds Dipping Natural cooling C C seconds +/- seconds Pull strength The terminal electrode and the ferrite shall not be damaged by the tensile forces applied by the conditions shown. After soldering a lead wire to a terminal electrode, apply a tensile force, T, in the direction shown. T (N) Size Code MB0 MB0 MB6 MB MB6 MB8 T (N) Low temperature storage life test Chipping, cracking or any other physical defects which are harmful to the electrical characteristics shall not be allowed. Impedance must be within +/- % of the initial value. Temperature: - +/- C Testing time: 8 +/- hours Measurement taken after placing for hours minimum. -0 TSC Electronics, Ltd. Tel: () -78 Fax: () -6

10 Surface Mount Chip EMI Suppressors Performance and Test Conditions Criteria Performance Parameters Flexural strength The terminal electrode and the ferrite shall not be damaged by the forces applied by the conditions shown. After soldering a chip to the center of a test substrate, deflect the midpoint of the substrate by mm (0.079 inches) and allow it to return to the initial position. Soldering shall be done in accordance with the recommended PC board pattern and reflow soldering. [.77] Load [.77] [0.787] 0 [0.9] [.7] Radius = 0 [0.9] [.97] Deflection Glass epoxy PC board. [0.09] High Temperature Resistance The physical appearance of the ferrite shall not be damaged. Impedance must be within +/- % of the initial value. Temperature: 8 +/- C Applied current: Rated current (maximum value) Testing time: 8 +/- hours Measurement taken after placing for hours minimum. 8 C Room temperature 8 hours hours Humidity Resistance The physical appearance of the ferrite shall not be damaged. Impedance must be within +/- % of the initial value. Humidity: 90 to 9% RH Temperature: +/- C Applied Current (maximum value) Testing time: 8 +/- hours Measurement taken after placing for hours minimum. C Room temperature 8 hours hours Thermal Shock Chipping, cracking or any other physical defects which are harmful to the electrical characteristics shall not be allowed. Impedance must be within +/- % of the initial value. Temperature: - C, +8 C, kept steady for minutes each. Cycle: cycles 8 C Room temperature Measurement taken after placing for hours minimum. minutes minutes - C TSC Electronics, Ltd. Tel: () -78 Fax: ()

11 Surface Mount Chip EMI Suppressors Tape Dimensions. +/- 0.0 [0.8 +/- 0.00].7 +/- 0. [ /- 0.00] +/- 0. [0.7 +/- 0.00] +/- 0.0 [ /- 0.00]. +0., -0 [ , -0] t +/- 0.0 [0.00] 8 +/- 0. [0. +/ ] B +/- 0. [0.00] +/- 0. [0.7 +/- 0.00] A +/- 0. [0.00]. +/- 0.0 [0.0 +/- 0.00] T +/- 0.0 [0.00] Fig. TAPE DIMENSIONS Rev Size Code A B T t Fig. MB0 MB0. [0.0]. [0.06].9 [0.07]. [0.09]. [0.0]. [0.07] 0. [0.0] 0. [0.0] Blank Chips 0 to [9.68 to.07] Blank Leader MB6.9 [0.07]. [0.8]. [0.0] 0. [0.0] (0 to pitches) [7.] MB.9 [0.].6 [0.].7 [0.067] 0. [0.0] Drawing direction MB6.9 [0.07].9 [0.9].8 [0.07] 0. [0.0] MB8.6 [0.].9 [0.9].0 [0.08] 0. [0.0] Dimensions in mm [inches].. +/- 0.0 [0.7 +/- 0.00].7 +/- 0. [ /- 0.00] +/- 0. [0.7 +/- 0.00] +/- 0.0 [ /- 0.00]. +0., -0 [ , -0] t +/- 0.0 [0.00] +0., -0 [ , -0] B +/- 0. [0.00] 8 +/- 0. [0. +/- 0.00] A +/- 0. [0.00].6 +/- 0. [0.06 +/- 0.00] T +/- 0.0 [0.00] Fig. - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

12 Surface Mount Chip EMI Suppressors Cross Reference Guide Description TSC Murata TDK DW Steward ACT Taiyo Yueden 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 66,,,,,,,,,, 6, 6, 6, 6, 6, 6, 6, 8, 8, 8, 68Ω 7Ω Ω Ω Ω Ω 0Ω Ω 70Ω 0Ω 7Ω 0Ω 0Ω 0Ω 7 Ω Ω 0Ω Ω Ω, hc Ω Ω 7Ω Ω Ω 7Ω 6Ω 7Ω Ω Ω Ω 0Ω Ω 0Ω Ω 70Ω 0Ω 7Ω 0Ω 0Ω 0Ω 0Ω 9Ω 9 Ω, hc 6Ω 6 Ω, hc Ω W, hc Ω 70Ω 90Ω Ω Ω 0Ω 0Ω 70 Ω Ω Ω, hc ΩΩ Ω Ω, hc Ω Ω, hc ΩΩ 68Ω Ω Ω 0Ω Ω 70Ω 70Ω Ω Ω MB0-6 MB0-7 MB0- MB0- MB0- MB0- MB0- MB0- MB0-7 MB0- MB0-7 MB0-0 MB0- MB0-8 MB0-0 MB0-070 MB0- MB0-0 MB0-0 MB0- MB0- MB0-70 MB0- MB0- MB0-70 MB0- MB0-7 MB0-0 MB0-0 MB0- MB0- MB0- MB0- MB0- MB0-7 MB0- MB0-7 MB0-0 MB0- MB0-8 MB0- MB6-90 MB6-90 MB6- MB6- MB6- MB6- MB6-0 MB6-700 MB6-900 MB6-0 MB6- MB6- MB6-0 MB MB- MB- MB- MB- MB-0 MB-0 MB-6 MB-0 MB-0 MB6- MB6-6 MB6-0 MB6-0 MB6-0 MB6- MB6-7 MB8-700 MB8- MB8- BLMB7D BLMAS BLMBD BLMAS BLMBS BLMAS BLMB0S BLMB0S BLMAS BLMBS BLMAS BLMAS BLMB7S BLMA0S BLMBS BLMA6S BLMA700S BLMAS BLMA0S BLMAS ACB8M- ACB8M-0 HFACB9 HF70ACB9 HFACB9 HFACC9 HFACB6 HFACC6 HF70ACB6 HF70ACC6 HFACB6 HFACC6 HFACB HFACC HF70ACB HFACB HFACC HFACB HF70ACB HFACB Z0.0S0 Z0-S0 Z6.0S0 Z6.S0 Z.0S0 Z6-S0 Z6.0S0 Z8.0S0 BCB-0 KCB-0 LCB-0 DCB-6 ACB-6 BCB-6 KCB-6 ACB- BCB- ACB-6 BCB-6 KCB-6 ACB-8 BCB-8 BK 8 LL 6 BK 8 HS BK 8 HM 7 BK 8 HS BK 8 LM 7 BK 8 HM 0 BK 8 LM BK 8 LM 8 BK HS BK HS BK HS BK HS 70 BK LL BK HS 7 BK HS 0 BK HS BK HS BK HS BK HM 7 BK HS BK HM 0 BK LM BK LM 8 TSC Electronics, Ltd. Tel: () -78 Fax: ()

13 Multilayer Chip Inductors ML0 Series General Specifications Inductance Range: Storage Temp: Operating Temp: Resistance to Solder Heat: Resistance to Solvent: 0.07 uh to.7 uh - C to + 8 C - C to + 8 C C, 0 Seconds Per MIL-STD-F W L T Dimensions Size Code L W T E ML0.06"±.008.0"±.008.0"±.008.0"±.008 External Electrode E Ferrite ML0 Series Part No. Inductance (µh) Inductance Tolerance Q Min. Test Freq. L, Q (MHz) Self-resonant Frequency (MHz) Min. DC Resistance ( Ω) Max. Rated Current (ma) Max. ML0-7N ML0-68N ML0-8N ML0-R0 ML0-R ML0-R ML0-R8 ML0-R ML0-R7 ML0-R ML0-R9 ML0-R7 ML0-R6 ML0-R68 ML0-R8 ML0-R0 ML0-R ML0-R ML0-R8 ML0-R ML0-R7 ML0-R ML0-R9 ML0-R ±% ±% ±% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% Specifications are subject to change without notice. - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

14 Multilayer Chip Inductors ML0 Series Performance Curves INDUCTANCE vs. DC SUPERPOSITION CHARACTERISTICS Test equipment: LCR meter 9A IMPEDANCE vs. FREQUENCY CHARACTERISTICS Test equipment: Impedance analyzer 9A µh 0 8.µH 0 Inductance (µh).0µh Inductance (µh) µh.0µh 8.µH 0.68µH µH DC current (ma) DC current (ma) 0 INDUCTANCE vs. TEMPERATURE CHARACTERISTICS Test equipment: LCR meter 9A Q vs. FREQUENCY CHARACTERISTICS Test equipment: Impedance analyzer 9A -.0µH 8.µH 0.68µH µh 0 L/L(%) Temperature ( C).0µH 8.µH 0.68µH µh Q µh 8.µH.0µH 0.68µH TSC Electronics, Ltd. Tel: () -78 Fax: ()

15 Multilayer Chip Inductors ML0 Series General Specifications Inductance Range: Storage Temp: Operating Temp: Resistance to Solder Heat: Resistance to Solvent: 0.07 uh to 7 uh - C to + 8 C - C to + 8 C C, 0 Seconds Per MIL-STD-F W L T Dimensions Size Code L W T E ML0.08"±.008.0"± "±.008.0"±.008 External Electrode E Ferrite ML0 Series Part No. Inductance (µh) Inductance Tolerance Q Min. Test Freq. L, Q (MHz) Self-resonant Frequency (MHz) Min. DC Resistance ( Ω) Max. Rated Current (ma) Max. ML0-7N ML0-68N ML0-8N ML0-R0 ML0-R ML0-R ML0-R8 ML0-R ML0-R7 ML0-R ML0-R9 ML0-R7 ML0-R6 ML0-R68 ML0-R8 ML0-R0 ML0-R ML0-R ML0-R8 ML0-R ML0-R7 ML0-R ML0-R9 ML0-R7 ML0-R6 ML0-6R8 ML0-8R ML0- ML0- ML0- ML0- ML0- ML ±% ±% ±% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% Specifications are subject to change without notice. -6 TSC Electronics, Ltd. Tel: () -78 Fax: () -6

16 Multilayer Chip Inductors ML0 Series Performance Curves INDUCTANCE vs. DC SUPERPOSITION CHARACTERISTICS Test equipment: LCR meter 9A IMPEDANCE vs. FREQUENCY CHARACTERISTICS Test equipment: Impedance analyzer 9A µh 0 0µH 0 Inductance (µh).0µh Inductance (µh) µh 0µH 0. 0.µH 0..0µH 0.µH DC current (ma) DC current (ma) 0 INDUCTANCE vs. TEMPERATURE CHARACTERISTICS Test equipment: LCR meter 9A Q vs. FREQUENCY CHARACTERISTICS Test equipment: Impedance analyzer 9A µh 0.µH.0µH - 0µH 0 L/L(%) µH + + µh+8 Temperature ( C) 0µH 0.µH Q 0µH µh.0µh 0.µH TSC Electronics, Ltd. Tel: () -78 Fax: ()

17 Multilayer Chip Inductors ML6 Series General Specifications Inductance Range: Storage Temp: Operating Temp: Resistance to Solder Heat: Resistance to Solvent: 0.07 uh to uh - C to + 8 C - C to + 8 C C, 0 Seconds Per MIL-STD-F W L T Dimensions Size Code L W T E ML6.6"± "±.008.0"±.008.0"±.008 External Electrode ML6 Series E Ferrite Part No. Inductance (µh) Inductance Tolerance Q Min. Test Freq. L, Q (MHz) Self-resonant Frequency (MHz) Min. DC Resistance ( Ω) Max. Rated Current (ma) Max. ML6-7N ML6-68N ML6-R0 ML6-R ML6-R ML6-R8 ML6-R ML6-R7 ML6-R ML6-R9 ML6-R7 ML6-R6 ML6-R68 ML6-R8 ML6-R0 ML6-R ML6-R ML6-R8 ML6-R ML6-R7 ML6-R ML6-R9 ML6-R7 ML6-R6 ML6-6R8 ML6-8R ML6- ML6- ML6- ML06- ML6- ML6-70 ML ±% ±% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% ±%, ±0% Specifications are subject to change without notice. -8 TSC Electronics, Ltd. Tel: () -78 Fax: () -6

18 Multilayer Chip Inductors ML6 Series Performance Curves 0 INDUCTANCE vs. DC SUPERPOSITION CHARACTERISTICS Test equipment: LCR meter 9A IMPEDANCE vs. FREQUENCY CHARACTERISTICS Test equipment: Impedance analyzer 9A µh µh 0 µh Inductance (µh) 0 0µH µh Inductance (µh) µh 0µH.0µH 0.µH µH 0 0 DC current (ma) INDUCTANCE vs. TEMPERATURE CHARACTERISTICS Test equipment: LCR meter 9A - 0 L/L(%) µH µh 8.µH µh.0µh Q Q vs. FREQUENCY CHARACTERISTICS µh Test equipment: Impedance analyzer 9A µh 0µH.0µH 0.µH.0µH µh 0.µH 0µH µh Temperature ( C) TSC Electronics, Ltd. Tel: () -78 Fax: ()

19 Multilayer Chip Inductors HL0 Series General Specifications Inductance Range: Storage Temp: Operating Temp: Resistance to Solder Heat: Resistance to Solvent:. nh to uh - C to + 8 C - C to + C C, 0 Seconds Per MIL-STD-F W L T Dimensions Size Code L W T E HL0.6±0. ±0. ±0. 0.±0. External Electrode E Ferrite HL0 Series Part No. Heights (T) (mm) Inductance (nh) MHz Inductance Tolerance Q (Typ.) (MHz) 0 S.R.F. (MHz) (Typ.) Rdc ( Ω) (Max.) Idc (ma) (Max.) HL0-FHNS HL0-FHNS HL0-FHN8S HL0-FHNS HL0-FHN7S HL0-FHN* HL0-FHN9* HL0-FHN7* HL0-FHN6* HL0-FH6N8* HL0-FH8N* HL0-FH0N* HL0-FHN* HL0-FHN* HL0-FH8N* HL0-FHN* HL0-FH7N* HL0-FHN* HL0-FH9N* HL0-FH7N* HL0-FH6N* HL0-FH68N* HL0-FH8N* HL0-FHR0* ±0. nh ±0. nh ±0. nh ±0. nh ±0. nh ±0. nh,0% ±0. nh,0% ±0. nh,0% ±0. nh,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% %,0% (7) () () () () (7) >00 >00 >00 >00 > Specifications are subject to change without notice. - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

20 Multilayer Chip Inductors HL0 Series Performance Curves 0 IMPEDANCE vs. FREQUENCY CHARACTERISTICS Test equipment: Impedance analyzer 9A Inductance (nh) FHR0 FH8N FH7N 0 FH0N FHN7 FHN7 FHN Q vs. FREQUENCY CHARACTERISTICS 0 Test equipment: Impedance analyzer 9A FHN FHN7 Q FHN7 FH0N FH7N FH9N FH68N 0 FHR TSC Electronics, Ltd. Tel: () -78 Fax: ()

21 Multilayer Chip Inductors HL0 Series General Specifications Inductance Range: Storage Temp: Operating Temp: Resistance to Solder Heat: Resistance to Solvent:.8 nh to 8.0 uh - C to + 8 C - C to + 8 C C, 0 Seconds Per MIL-STD-F W L T Dimensions Size Code L W T E HL0.08"±.008.0"±.008.0"± "±.0 External Electrode E Ferrite.0"±.0.0"±.0 HL0 Series Part No. Heights (T) (mm) Inductance (nh) MHz Inductance Tolerance Q (Typ.) (MHz) 0 S.R.F. (MHz) (Typ.) Rdc ( Ω) (Max.) Idc (ma) (Max.) HL0-FN8 HL0-FN HL0-FN7 HL0-FN HL0-FN9 HL0-FN7 HL0-FN6 HL0-F6N8 HL0-F8N HL0-F0N HL0-FN HL0-FN HL0-F8N HL0-FN HL0-F7N HL0-FN HL0-F9N HL0-F7N HL0-F6N HL0-F68N HL0-F8N ±0. nh ±0. nh ±0. nh K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M Specifications are subject to change without notice. - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

22 Multilayer Chip Inductors HL0 Series Performance Curves 0 IMPEDANCE vs. FREQUENCY CHARACTERISTICS Test equipment: Impedance analyzer 9A R0 Inductance (nh) N 0 N Q vs. FREQUENCY CHARACTERISTICS Test equipment: Impedance analyzer 9A 70 Q F6N F9N FR7 F8N 0 0 FR9 FR FR TSC Electronics, Ltd. Tel: () -78 Fax: ()

23 Surface Mount Inductors n Chip Inductors CM Series General Specifications K Temp Rise: Ambient Temp: Storage Temp: Operating Temp: Terminal Strenght: Current Rating: Resistance to Solder Heat: Resistance to Solvent C Max C Max - C to + C - C to + C 0. KG Min Based on current flow and temperature rise of C maximum. C, 0 Seconds Per MIL-STD- Dimensions K.8"±.0.mm±.."±.0.mm± "±0.08.mm±. Pc Board Pattern (in mm) Parallel 0. Series 0."± mm CM Series.0"± mm PART NUMBER INDUCTANCE (uh) Q MIN TEST FREQ. (MHZ) SRF MIN (MHZ) DCR MAX (OHM) IDC (ma) CM-RM CM-RM CM-R8M CM-RM CM-R7M CM-RM CM-R9M CM-R7M CM-R6M CM-R68M CM-R8M CM-R0M CM-RM CM-RM CM-R8M CM-RM CM-R7M CM-RK CM-R9K CM-R7K CM-R6K CM-6R8K CM-8RK CM-K CM-K CM-K CM-K CM-K CM-70K CM-K CM-90K CM-70K CM-K CM-6K CM-8K CM-0K CM-K CM-K CM-8K CM-K 0. ± % 0. ± % ± % 0. ± % 0.7 ± % 0. ± % 0.9 ± % 0.7 ± % 0.6 ± % 0.68 ± % ± %.0 ± %. ± %. ± %.8 ± %. ± %.7 ± %. ± 0%.9 ± 0%.7 ± 0%.6 ± 0% 6.8 ± 0% 8. ± 0% 0.0 ± 0%.0 ± 0%.0 ± 0% 8.0 ± 0%.0 ± 0% 7.0 ± 0%.0 ± 0% 9.0 ± 0% 7.0 ± 0% 6.0 ± 0% 68.0 ± 0% 8.0 ± 0% ± 0% ± 0% ± 0% ± 0% ± 0% Specifications are subject to change without notice. - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

24 Surface Mount Inductors n Chip Inductors CM Series 0K General Specifications Temp Rise: Ambient Temp: Storage Temp: Operating Temp: Terminal Strenght: Current Rating: Resistance to Solder Heat: Resistance to Solvent C Max C Max - C to + C - C to + C 0. KG Min Based on current flow and temperature rise of C maximum. C, 0 Seconds Per MIL-STD- Dimensions 0K.77"±.0.mm±..6"±.0.mm±. 0.8"±0.08.mm±0. Pc Board Pattern (in mm) Parallel 0.6 Series...07"±0.00.mm.. CM Series.0"±.008 mm PART NUMBER INDUCTANCE (uh) Q MIN TOLERANCE ±% TEST FREQ. (MHz) SRF (MHZ) MIN. DCR Ohms MAX. IDC (ma) CM-R0M CM-RM CM-RM CM-R8M CM-RM CM-R7M CM-RM CM-R9M CM-R7M CM-R6M CM-R68M CM-R8M CM-R0K CM-RK CM-RK CM-R8K CM-RK CM-R7K CM-RK CN-R9K CM-R7K CM-R6K CM-6R8K CM-8RK CM-K CM-K CM-K CM-K CM-K CM-70K CM-K CM-90K CM-70K CM-K CM-6K CM-8K CM-0K CM-K CM-K CM-8K CM-K CM-7K CM-K CM-9K CM-7K CM-6K CM-68K CM-8K CM-0K Specifications are subject to change without notice. TSC Electronics, Ltd. Tel: () -78 Fax: ()

25 SMT Power Inductors D Series General Specifications PART NUMBER INDUCTANCE (µh±%) DCR max. ( Ω) ISAT (A) IRMS (A rms) D-0 D- D- D- D-7 D-68 D-0 D- D- D- D-7 D-68 D-0 D- D- D- D-7 D-68 D ".9 Max st significant digit." 8.8 Max.70" 9. Max nd significant digit.". Max Multiplier Mounting Pads.".".9.90" 7.7." inches ( mm ).0" 7.6.0" -6 TSC Electronics, Ltd. Tel: () -78 Fax: () -6

26 SMT Power Inductors D Series General Specifications PART NUMBER INDUCTANCE (µh) DCR max. ( Ω) ISAT (A) IRMS (A rms) D-0 D- D- D- D-7 D-68 D-0 D- D- D- D-7 D-68 D ".70" 9. Max.0".9 Max st significant digit nd significant digit Multiplier." 8.8 Dia..". Mounting Pads.".9.90" 7.7." inches ( mm ).0" 7.6.0" TSC Electronics, Ltd. Tel: () -78 Fax: ()

27 SMT Power Inductors D Series GENERAL CHARACTERISTICS Ideal for a variety of DC-DC converter inductor applications. Available on tape and reel for automatic insertion. Low DC resistance and large permissable DC current. This can be surface mount assembly and reflow soldering is also possible. ±0. 6 Max.9 ±0. ±0. ±0..0±0. Electrode Electrical Specifications UNIT (m/m) PART NUMBER INDUCTANCE L (µh) ±% L TEST FREQUENCY (KHz) DC RESISTANCE ( Ω) MAX RATED DC CURRENT (A) MAX D-M D-M D-M D-M D-M D-70M D-M D-90M D-70M D-M D-6M D-8M D-0M D-M D-M D-8M D-M D-7M D-M D-9M D-7M D-6M D-68M D-8M D-0M *Maximum allowable current is DC current which causes 0% inductance reduction of the initial value, or coil temperature to rise by C, whichever is smaller. (Reference ambient temperature C) -8 TSC Electronics, Ltd. Tel: () -78 Fax: () -6

28 SMT Power Inductors D Series GENERAL CHARACTERISTICS Ideal for a variety of DC-DC converter inductor applications. Available on tape and reel for automatic insertion. Low DC resistance and large permissable DC current. This can be surface mount assembly and reflow soldering is also possible. ±0. 8 Max.9 ±0. ±0. ±0..0±0. Electrical Specifications Electrode UNIT: (m/m) PART NUMBER INDUCTANCE L (µh) ±% L TEST FREQUENCY (KHz) DC RESISTANCE ( Ω) MAX RATED DC CURRENT (A) MAX D-RM D-RM D-RM D-RM D-R7M D-R6M D-6R8M D-8RM D-M D-M D-M D-M D-M D-70M D-M D-90M D-70M D-M D-6M D-8M D-0M D-M D-M D-8M D-M D-7M D-M D-9M D-7M D-6M D-68M D-8M D-0M *Maximum allowable current is DC current which causes 0% inductance reduction of the initial value, or coil temperature to rise by C, whichever is smaller. (Reference ambient temperature C) TSC Electronics, Ltd. Tel: () -78 Fax: ()

29 Surface Mount Inductors D Series Features Compact, low profile (7.mm square,.9mm high) Suitable for reflow soldering. Available on tape and reel for auto insertion. Ideal for a variety of DC-DC converter inductor applications..9 Max Electrical Specifications UNIT: (m/m) PART NUMBER INDUCTANCE L (µh) ±% L TEST FREQUENCY (KHz) DC RESISTANCE ( Ω) MAX RATED DC CURRENT (A) MAX D-RM D-R7M D-6R8M D-M D-M D-M D-M D-70M D-6M D-0M D-M D-M D-M D-7M *Maximum allowable current is DC current which causes 0% inductance reduction of the initial value, or coil temperature to rise by C, whichever is smaller. (Reference ambient temperature C) - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

30 Surface Mount Inductors D Series Features Low profile (7.mm square,.mm high) Suitable for large current. Available in magnetically shielded or unshielded version. Available on tape and reel for automatic insertion. Ideal for a variety of DC-DC converter inductor applications Max Electrical Specifications UNIT: (m/m) PART NUMBER INDUCTANCE L (µh) ±% L TEST FREQUENCY (KHz) DC RESISTANCE ( Ω) MAX RATED DC CURRENT (A) MAX D-R0M D-RM D-RM D-RM D-R7M D-6R8M D-M D-M D-M D-M D-M D-70M D-M D-90M D-70M D-M D-6M D-8M D-0M D-M D-M D-8M D-M D-7M D-M D-9M D-7M D-6M *Maximum allowable current is DC current which causes 0% inductance reduction of the initial value, or coil temperature to rise by C, whichever is smaller. (Reference ambient temperature C) TSC Electronics, Ltd. Tel: () -78 Fax: ()

31 Surface Mount Inductors D Series Features Compact, low profile (7.mm square, mm high) Suitable for reflow soldering. Available on tape and reel for automatic insertion. Ideal for a variety of DC-DC converter inductor applications Max Electrical Specifications UNIT: (m/m) PART NUMBER INDUCTANCE L (µh) ±% L TEST FREQUENCY (KHz) DC RESISTANCE ( Ω) MAX RATED DC CURRENT (A) MAX D-K D-K D-K D-K D-K D-70K D-K D-90K D-70K D-K D-6K D-8K D-0K D-K D-K D-8K D-K D-7K D-K D-9K D-7K D-6K D-68K D-8K D-0K *Maximum allowable current is DC current which causes 0% inductance reduction of the initial value, or coil temperature to rise by C, whichever is smaller. (Reference ambient temperature C) - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

32 Surface Mount Toroids T Series GENERAL CHARACTERISTICS Suited for IR and vapor reflow solder process Rated up to Celsius Standard packaging in tubes, optional packaging in plastic trays or tape-and-reel Custom designs available upon request B Max. X.0 D+.0 - C Max. E A Max..00 Surfaces F ELECTRICAL SPECIFICATIONS Part Number 0 Adc µh (tolerance ±%) Idc AMPS (Estimated rise of C for conditions shown) LW/Idc uh (Estimated rise of C for conditions shown) DC Resistance Ohms Maximum(Ω) Version T-0 T-0 T-0 T-0 T-0 T-06 T-07 T-08 T-09 T-0 T- T- T- T- T- T-6 T-7 T-8 T-9 T- T MECHANICAL DATA VERSION A max (INCHES) Bmax (INCHES) Cmax (INCHES) D (INCHES) E (INCHES) F (INCHES) TSC Electronics, Ltd. Tel: () -78 Fax: ()

33 Surface Mount Inductors T Series Features Surface Mount Low profile (9.mm high). High reliability. Suitable for reflow soldering. Available on tape and reel for automatic insertion..70±0..00±0..00±0..±0. 0±0. 9. Max Electrical Specifications PART NUMBER INDUCTANCE L (µh) ±% DC RESISTANCE ( Ω) MAX 0% DROP DC (AMPS) % DROP DC (AMPS) % DROP DC (AMPS) T-R0M T-RM T-RM T-RM T-R7M T-6R8M T-8RM T-M T-M T-M T-M T-70M T-6M T-0M *Rated for an operating temperature range of - C to C (ambient temperature plus the temperature rise of the inductor) with a linear inductance variation. - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

34 SMT Power Inductor/Transformers T Series General Specifications SIZE PARALLEL SERIES PART NUMBER OPEN CIRCUIT INDUCTANCE µh±% FULL LOAD INDUCTANCE µh MIN FULL LOAD CURRENT Adc DC RESISTANCE Ohms MAX OPEN CIRCUIT INDUCTANCE µh±% FULL LOAD INDUCTANCE µh MIN FULL LOAD CURRENT Adc DC RESISTANCE Ohms MAX T- T8- T0- T- T- T- T- T- T68- T8- T- T- T ".00 IN. MIN. FOR CLEANING CLEARANCE PARALLEL 0." 0." 0." 0." SERIES TRANSFORMER BOTTOM VIEW TSC Electronics, Ltd. Tel: () -78 Fax: ()

35 Balun Transformers B0 Series Surface Mount (Unit: inches/mm) Features. Max Max Max 0.6±0. Pair wire coil for high stability. Base pin terminal treated, allowing mounting 'as is' on a PCB. Applications 6. Max 6. Max Double balance mixers, broad-band tranformers, impedance transformers, etc. Part Number Winding Turns Operating Frequency Range Insertion Loss Pin Connection Fig. B0-0 MHz~0MHz 0dB max. B0-0 0MHz~.0GHz 6dB max. Double Balanced Mixer B0- B0-8 B0-0 8MHz~0MHz 6MHz~0MHz MHz~0MHz.dB max. db max. db max. B0-0MHz~.GHz db max. B0-08 x db max. B0-0 x 9MHz~MHz db max. Frequency Mixer B0-0 B0-086 x x.mhz~70mhz.mhz~0mhz db max. db max. B0-087 x.mhz~0mhz db max. Distributor B MHz~0MHz IN to OUT-,.dB max. OUT- to OUT- (ISOLATION) 0dB min. B0-0 6MHz~0MHz IN to OUT-.dB max. IN to OUT- db~db Directional Coupler B0-6 6MHz~0MHz IN to OUT- 0.9dB max. IN to OUT- db~6db YB MHz~0MHz IN to OUT- db max. IN to OUT- db~7db Pin Connection IN OUT IN OUT OUT OUT Double Balanced Mixer Fig. Transformer Fig. Distributor Fig. Directional Coupler Fig. -6 TSC Electronics, Ltd. Tel: () -78 Fax: () -6

36 Molded Inductors MCM Series General Specifications Inductance Range: Operating Temperature Range: Current Rating: Ambient Temperature: Inductance Tolerance: Marking: 0.0 µh to,000 µh - C to +0 C. Based on temperature rise not to exceed C. 70 C. ±0% over entire inductance range. -band color code. 0." ±0.00 AWG/TCW 0.09"±0.00." Nom. Part Number Inductance (µh) Q Min Test Freq. (MHz) Self Resonant Freq. Min. (MHz) DC Resistance Max ( Ω) Rated DC Current Max (ma) MCM-R0K MCM-RK MCM-RK MCM-R8K MCM-RK MCM-R7K MCM-RK MCM-R9K MCM-R7K MCM-R6K MCM-R68K MCM-R8K MCM-R0K MCM-RK MCM-RK MCM-R8K MCM-RK MCM-R7K MCM-RK MCM-R9K MCM-R7K MCM-R6K MCM-6R8K MCM-8RK MCM-K MCM-K MCM-K MCM-K MCM-K MCM-70K MCM-K MCM-90K MCM-70K MCM-K MCM-6K MCM-8K MCM-0K MCM-K MCM-K MCM-8K MCM-K MCM-7K MCM-K MCM-9K MCM-7K MCM-6K MCM-68K MCM-8K MCM-0K Specifications are subject to change without notice. TSC Electronics, Ltd. Tel: () -78 Fax: ()

37 Molded Inductors MCS Series General Specifications Inductance Range: 0. µh to,000 µh Operating Temperature Range: - C to +0 C. Ambient Temperature: +70 C Inductance Tolerance: ±% from 0. µh to 0.7 µh; ±0% from 0.6 µh to µh; ±% from 6 µh to,000 µh Marking: -band color code. 0.7" ±0.00 AWG/TCW 0.6"±0.00." Nom. Part Number Inductance (µh) Q Min Test Freq. (MHz) Self Resonant Freq. Min. (MHz) DC Resistance Max ( Ω) Rated DC Current Max (ma) MCS-RM MCS-RM MCS-RM MCS-R7M MCS-R6K MCS-R68K MCS-R8K MCS-R0K MCS-RK MCS-RK MCS-R8K MCS-RK MCS-R7K MCS-RK MCS-R9K MCS-R7K MCS-R6K MCS-6R8K MCS-8RK MCS-K MCS-K MCS-K MCS-K MCS-K MCS-K MCS-70K MCS-0K MCS-K MCS-J MCS-90J MCS-J MCS-70J MCS-0J MCS-J MCS-6J MCS-6J MCS-7J MCS-8J MCS-90J MCS-0J MCS-J MCS-J MCS-J MCS-J MCS-6J MCS-8J MCS-J MCS-J MCS-J MCS-7J MCS-J MCS-J MCS-6J MCS-9J MCS-J MCS-7J MCS-J MCS-6J MCS-6J MCS-68J MCS-7J MCS-8J MCS-9J MCS-0J Specifications are subject to change without notice. -8 TSC Electronics, Ltd. Tel: () -78 Fax: () -6

38 Conformal Coated Chokes ECM Series General Specifications Inductance Range: Operating Temp: Terminal Strength: Rated Current: 0.0 µh to 0 µh - C to +0 C lbs pull test Based on coil temperature Marking Color Black Brown Red Orange Yellow Green Blue Violet Grey White Gold st & nd Sig. Fig rd Multiplier th Tolerance ±% ±% Dimensions Awg." Nom. 0." Max 0." Max Part No. Inductance [µh] Tol. Q (min) Self-Resonance Frequency [MHz] (min) DC Resistance [Ohm] (max) I DC [ma] Test Frequency [MHz] ECMR0K ECMRK ECMRK ECMR8K ECMRK ECMR7K ECMRK ECMR9K ECMR7K ECMR6K ECMR68K ECMR8K ECMR0K ECMRK ECMRK ECMR8K ECMRK ECMR7K ECMRK ECMR9K ECMR7K ECMR6K ECM6R8K ECM8RK ECMK ECMK ECMK ECMK ECMK ECM70K ECMK ECM90K ECM70K ECMK ECM6K ECM8K ECM0K ECMK ECMK ECM8K ECMK ECM7K ECMK ECM9K ECM7K ECM6K ECM68K ECM8K ECM0K ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% Specifications are subject to change without notice. TSC Electronics, Ltd. Tel: () -78 Fax: ()

39 ECS Series Conformal Coated Chokes R General Specifications Inductance Range: Operating Temp: Terminal Strength: Rated Current: 0.0 µh to 00 µh - C to +0 C lbs pull test Based on coil Dimensions." Nom. Awg 0." Max 0.6" Max Marking Color Black Brown Red Orange Yellow Green Blue Violet Grey White Gold st & nd Sig. Fig rd Multiplier th Tolerance ±% ±% Part No. Inductance [µh] Tol. Q (min) Self-Resonance Frequency [MHz] (min) DC Resistance [Ohm] (max) I DC [ma] Test Frequency [MHz] ECSR0K ECSRK ECSRK ECSR8K ECSRK ECSR7K ECSRK ECSR9K ECSR7K ECSR6K ECSR68K ECSR8K ECSR0K ECSRK ECSRK ECSR8K ECSRK ECSR7K ECSRK ECSR9K ECSR7K ECSR6K ECS6R8K ECS8RK ECSK ECSK ECSK ECSK ECSK ECS70K ECSK ECS90K ECS70K ECSK ECS6K ECS8K ECS0K ECSK ECSK ECS8K ECSK ECS7K ECSK ECS9K ECS7K ECS6K ECS68K ECS8K ECS0K ECSK ECSK ECS8K ECSK Specifications are subject to change without notice. ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% ±0% TSC Electronics, Ltd. Tel: () -78 Fax: ()

40 Power Line Chokes PCL and PCS Series General Specifications Inductance Range: Inductance Tolerance: Test Frequency: Saturation Current: Temperature Rating: Encapsulation:.9 µh to,000 µh ±0%, Standard (±% Optional) KHz Lowers inductance by 0% - C to + C PVC Shrink Tubing (Polyolefin Tubing Optional) L Series L D Lead Length Awg D PCL PCS 0.9" max 0." max 0.7" max 0.6" max." nom.." nom. PCL Series Part Number PCL-R9K PCL-R7K PCL-R6K PCL-6R8K PCL-8RK PCL-K PCL-K PCL-K PCL-K PCL-K PCL-70K PCL-K PCL-90K PCL-70K PCL-K PCL-6K PCL-8K PCL-0K PCL-K PCL-K PCL-8K PCL-K PCL-7K PCL-K PCL-9K PCL-7K PCL-6K PCL-68K PCL-8K PCL-0K PCL-K PCL-K PCL-8K PCL-K PCL-7K PCL-K PCL-9K PCL-7K PCL-6K PCL-68K PCL-8K PCL-0K PCL-K PCL-68K PCL-0K Ind. [µh] DCR [Max] [Ohms] INCR,I [DC,A] Rated I, AC [Max] PCS Series Part Number PCS-R9K PCS-R7K PCS-R6K PCS-6R8K PCS-8RK PCS-K PCS-K PCS-K PCS-K PCS-K PCS-70K PCS-K PCS-90K PCS-70K PCS-K PCS-6K PCS-8K PCS-0K PCS-K PCS-K PCS-8K PCS-K PCS-7K PCS-K PCS-9K PCS-7K PCS-6K PCS-68K PCS-8K PCS-0K PCS-K PCS-K PCS-8K PCS-K PCS-7K PCS-K PCS-9K PCS-7K PCS-6K PCS-68K PCS-8K PCS-0K PCS-K PCS-K PCS-8K Ind. [µh] DCR [Max] [Ohms] INCR,I [DC,A] Rated I, AC [Max] Specifications are subject to change without notice. TSC Electronics, Ltd. Tel: () -78 Fax: ()

41 Flat Coil FC Series General Specifications Inductance Range: Current Rating: Operating Temperature: Inductance Tolerance: Terminal Strength:.0 µh to 0,000 µh Based on current flow temperature rise of maximum at C ambient temperature. - C to +0 C. ±0% over entire range. lb. minimum Dimensions." max."±.0."±.0.00" min AWG/TCW."±.0 PART NUMBER INDUCTANCE (uh) Q MIN. TEST FREQ. (MHz) DC RESISTANCE (Ohms) RATED DC CURRENT MAX (A) FC-R0K FC-RK FC-RK FC-R8K FC-RK FC-RK FC-R7K FC-RK FC-R9K FC-R7K FC-R0K FC-R6K FC-6R8K FC-7R6K FC-8RK FC-K FC-K FC-K FC-K FC-K FC-K FC-70K FC-K FC-90K FC-70K FC-0K FC-K FC-6K FC-7K FC-8K FC-0K FC-K FC-K FC-8K FC-K FC-K FC-7K FC-K FC-9K FC-7K FC-K FC-6K FC-68K FC-7K FC-8K FC-0K FC-K FC-K FC-8K FC-K FC-K FC-7K FC-K FC-9K FC-7K FC-K FC-7K FC-0K Specifications are subject to change without notice. - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

42 Variable Shielded Inductors VL0 and VL0 Series.7" Max..0" Max..77" ±.00 F.8"±.0.0" Max..77" ±.00.09" ±.0 Winding Direction S Wire: Core: Testing:... AWG # TCW 6- (.9 x TPI) Captive Slot Inductance and Q measured on Q meter HPA. Attach /" AWG #6 TCW soldered along full length of the coil leads. Then bend /" down from bottom of stand of f at an angle of 90. Inductance min. is measured with core flush to top of form. All inductance values greater than 0.µH read at recommended Q meter frequency. VL0 Series Part Number Ind. [Min] [µh] Ind. [Nom] [µh] Ind. [Max] [µh] Min. Ind. [Nom] Color VL0-0 VL0-0 VL0-06 VL0-08 VL0-0 VL0- MHz MHz MHz MHz Brown Red Orange Yellow Green Blue Violet VL0 Series Part Number Ind. [Min] [µh] Ind. [Nom] [µh] Ind. [Max] [µh] Min. Ind. [Nom] Color VL0-0 VL0-0 VL0-06 VL0-08 VL0-0 VL0- VL0- VL0-6 VL0-8 VL MHz MHz MHz MHz MHz MHz MHz MHz MHz Brown Red Orange Yellow Green Blue Violet Gray White Black TSC Electronics, Ltd. Tel: () -78 Fax: ()

43 Variable Shielded Inductors VL0, VL0, and VL0 Series." Max.." ±.0.76" ±.007 F." Max..8"±.0.7" ±.0.76" ± " ±.0 Winding Direction S Wire: Core: Testing:.... AWG # Single Polyurethane 0- ( x TPI) Hex Hole Q & L readings taken on HP A Q meter with /" long of AWG #6 TCW soldered along the coil leads and with one end flush with the bottom of the coil. Then bent /" down from stand off at an angle of 90. L min measured with core halfway out top of form. All L values greater than 0.µH read at recommended Q meter frequency. All L values below 0.µH calculated from readings taken at MHz. VL0, VL0, VL0 Series Part Number Ind. [Min] [µh] Ind. [Nom] [µh] Ind. [Max] [µh] Min. Ind. [Nom] Color VL0-0 VL0-0 VL0-06 VL0-08 VL0-0 VL0- VL0- VL0-6 VL0-8 VL0- VL0-0 VL0-0 VL0-06 VL0-08 VL0-0 VL0- VL0- VL0-6 VL0-8 VL0- VL0-0 VL0-0 VL0-06 VL0-08 VL0-0 VL0- VL0- VL0-6 VL0-8 VL0- VL0- VL MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Brown Red Orange Yellow Green Blue Violet Gray White Black Brown Red Orange Yellow Green Blue Violet Gray White Black White Black Brown Red Orange Yellow Green Blue Violet Gray White Black - TSC Electronics, Ltd. Tel: () -78 Fax: () -6

44 Ferrite Beads WBC Series Features - Wide Band Chokes: Standard configurations available in ½ turns, ½ turns, X ½ turns and turns. Custom winding configurations available upon request. Ideal for interference suppression. Initially resistive with flat impedance matching characteristics above MHz. Part Number Imp. ( Ω) Test Freq. Number of turns Dim. A (mm) Dim. B (mm) Fig.# WBC0--A WBC0--B WBC0--A WBC0--B WBC0--A WBC0--B WBC0--A WBC0--B WBC0--A WBC0--B x. x ±0. 6.0±0. 6.0±0. 6.0±0. 6.0±0. 6.0±0. 6.0±0. 6.0±0. 6.0±0. 6.0±0. 0±0. 0±0. 0±0. 0±0. 0±0. 0±0. 0±0. 0±0. 0±0. 0±0. Specifications are subject to change without notice. AWG A Fig. mm Nom. B Fig. Fig. Fig. Fig. Cross Reference Guide Type Imp. Ω Turns Freq. MHz TSC Fair Rite Philips Steward Act WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC X. X. WBC0-B WBC0-A WBC0-B WBC0-A WBC0-B WBC0-A WBC0-B WBC0-A WBC0-B WBC0-A VK009-B VK09-B VK00-B VK0-B VK0-B VK0-B 8C06-OAW 8C06-OCW 8C06-OBW 8C06-ODW 8C06-OEW WB-.T WB-.T WB-.0T WB-.0T WB-T WB-T WB-X.T WB-X.T WB-.0T WB-.0T NOTE: Cross reference information supplied as a guide. Use TSC Electronics, Ltd. sample for verification. TSC Electronics, Ltd. Tel: () -78 Fax: ()

45 Ferrite Beads LBC Series Features -Leaded Bead Chokes: Higher current carrying capability than surface mount devices. Lowest cost component for signal filtering. Applications include: High frequency filtering of clocks and video signals, prevents oscillations in high frequency amplifiers, and filtering power input of oscillators or logic devices using high speed clocks. D C B A LBC Series Part Number Imp. ( Ω ) Test Freq. Dim. A (mm) Dim. B (mm) Dim. C (mm) Dim. D LBC0-A LBC0-B LBC0-A LBC0-B LBC0-A LBC0-B LBC067-A LBC067-B LBC076-A LBC076-B LBC089-A LBC089-B LBC09-A LBC09-B LBC0-A LBC0-B LBC08-A LBC08-B ±0..±0..±0..±0..±0..±0..±0..±0..±0..±0..±0..±0..±0..±0..±0..±0..±0..±0. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±. 6.0±..±0..±0..±0..±0. 6.0±0. 6.0±0. 6.7±0. 6.7±0. 7.6±0. 7.6±0. 8.9±0. 8.9±0. 9.±0. 9.±0..±0..±0..8±0..8±0. AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG Specifications are subject to change without notice. Type LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC LBC Imp. Ω Freq. MHz Cross Reference Guide TSC LBC0-B LBC0-B LBC0-B LBC067-B LBC076-B LBC089-B LBC09-B LBC0-B LBC08-B LBC0-A LBC0-A LBC0-A LBC067-A LBC07-A LBC089-A LBC09-A LBC0-A LBC08-A Fair Rite Steward 08L08-8L08-0 8L08-0 8L08-0 8L L08-A00 8L08-0 8L08-0 8L08-0 8L NOTE: Cross reference information supplied as a guide. Use TSC Electronics, Ltd. sample for verification. Act KA-0 KA-0 KA-0 KA-067 KA-078 KA-090 KA-09 KA-0-6 TSC Electronics, Ltd. Tel: () -78 Fax: () -6

46 Power Line Chokes D0 Series General Specifications Inductance Range: Current Rating: Operating Temperature: Inductance Tolerance: Terminal Strength:.0 µh to µh Based on current flow temperature rise of maximum at C ambient temperature. - C to +0 C. ±0% over entire range. lb. minimum.6 ax. A. ax Part No. Inductance (µh ± 0%) DC Resistance Ohms Maximum Current Saturating Amps DC Dimension (A) (inches) D0-R0K D0-RK D0-RK D0-R8K D0-RK D0-R7K D0-RK D0-R9K D0-R7K D0-R6K D0-6R8K D0-8RK D0-K D0-K D0-K D0-K D0-K D0-70K D0-K D0-90K D0-70K D0-K D0-6K D0-8K D0-0K D0-K D0-K D0-8K D0-K D0-7K D0-K D0-9K D0-7K D0-6K TSC Electronics, Ltd. Tel: () -78 Fax: ()

47 Power Line Chokes D Series General Specifications Inductance Range: Current Rating: Operating Temperature: Inductance Tolerance: Terminal Strength:.0 µh to,0 µh Based on current flow temperature rise of maximum at C ambient temperature. - C to +0 C. ±0% over entire range. lb. minimum. ax. A. ax Part No. Inductance (µh ± 0%) DC Resistance Ohms Maximum Current Saturating Amps DC Dimension (A) (inches) D-R0K D-RK D-RK D-R8K D-RK D-R7K D-RK D-R9K D-R7K D-R6K D-6R8K D-8RK D-K D-K D-K D-K D-K D-70K D-K D-90K D-70K D-K D-6K D-8K D-0K D-K D-K D-8K D-K D-7K D-K D-9K D-7K D-6K D-68K D-8K D-0K D-K D-K D-8K D-K TSC Electronics, Ltd. Tel: () -78 Fax: () -6

48 Power Line Chokes D Series General Specifications Inductance Range: Current Rating: Operating Temperature: Inductance Tolerance: Terminal Strength:.0 µh to,700 µh Based on current flow temperature rise of maximum at C ambient temperature. - C to +0 C. ±0% over entire range. lb. minimum.0 ax. A. ax Part No. Inductance (µh ± 0%) DC Resistance Ohms Maximum Current Saturating Amps DC Dimension (A) (inches) D-R0K D-RK D-RK D-R8K D-RK D-R7K D-RK D-R9K D-R7K D-R6K D-6R8K D-8RK D-K D-K D-K D-K D-K D-70K D-K D-90K D-70K D-K D-6K D-8K D-0K D-K D-K D-8K D-K D-7K D-K D-9K D-7K D-6K D-68K D-8K D-0K D-K D-K D-8K D-K D-7K TSC Electronics, Ltd. Tel: () -78 Fax: ()