Test Report. Sample Serial No. : ; CIRS-JSUL Will Young Textiles Ltd. Huzhou. Applicant

Transcription

1 Page 1 / 6 Test Report Sample Serial No. : ; CIRS-JSUL Applicant Will Young Textiles Ltd. Huzhou Address , Jin Shiji Bldg., Fenghuang Rd., Huzhou, Zhejiang, China Sample name Synthetic leather Description Brown/ grey solid Test Period Sep. 28, 2012 ~ Oct. 10, 2012 Test Requirement Please refer to next page(s) Test Method Please refer to next page(s) Test Results Please refer to next page(s) Complied by Inspected by Approved by Walt Lin/ General Manager

2 Page 2 / 6 Part 1: Total Cadmium Test Method(s): EN Test Item(s) MDL MCV Total Cadmium N.D. 2. MCV= Maximum Concentration Values 3. MDL = Method Detection Limit, N.D. = Not detected (<MDL) Part 2: Antimony Test Method(s): EN 71-3:1994+A1:2000+AC:2002 Test Item(s) MDL MCV* A B Antimony(Sb) N.D. 2. MCV= Maximum Concentration Values 3. MDL = Method Detection Limit, N.D. = Not detected (<MDL) 4.*: MCV A is for any toy material except for modelling clay. MCV B is for molding clay.

3 Page 3 / 6 Part 3: Formaldehyde Test Method(s): ISO :2008 According to Oeko-Tex Standard 100, the MCV(Maximum Concentration Values) of Formaldehyde must comply with the following table: Standard I II III Ⅳ Textiles which, when Product Class Textiles and textile Textiles which, when used as intended, do Furnishing materials toys for babies and used as intended, not come into contact for decorative small children up to have a large part of with the skin, or only purposes such as the age of three, e.g. their surface in direct have a small part of table linen and underwear, romper contact with the skin, their surface in curtains, but also suits, bed linen, e.g. underwear, bed contact with the skin, textile wall and floor bedding, soft toys linen, terry goods, e.g. jackets, coats, coverings etc. etc. shirts, blouses etc. interlining materials etc. Formaldehyde n.d.* 75 mg/kg 300 mg/kg 300 mg/kg * n.d. corresponds according to -Japanese Law 112 test method with an absorbance unit less than 0.05 resp. <16ppm Test Item(s) CAS No. MDL Formaldehyde MCV= Maximum Concentration Values; MDL = Method Detection Limit

4 Page 4 / 6 Part 4: AZO dyes Test Method(s): EN : 2012 No. Test Item(s) CAS No. CIRS-JSUL Aminobiphenyl N.D. 2 Benzidine N.D. 3 4-Chloro-O-Toluidine N.D. 4 2-Naphthylamine N.D. 5 O-Aminoazotoluene N.D. 6 2-Amino-4-nitrotoluene N.D. 7 4-Chloroaniline N.D. 8 2,4-Diaminoanisole N.D. 9 4,4'-Diamino diphenyl methane N.D. 10 3,3'-Dichlorobenzidine N.D. 11 3,3'-Dimethoxybenzidine N.D. 12 3,3'-Dimethylbenzidine N.D. 13 4,4'-Diamino-3,3'-dimethyldiphenylmethane N.D Methoxy-5-methylaniline N.D. 15 4,4'-Methylene-Bis(2-Chloroaniline) N.D. 16 4,4'-Oxydianiline N.D. 17 4,4'-Thiodianiline N.D. 18 O-Toluidine N.D. 19 2,4-Diaminotoluene N.D. 20 2,4,5-Trimethylaniline N.D (Phenylazo)aniline N.D. 22 O-Anisidine N.D. 2. MCV= Maximum Concentration Values=30 mg/kg According to No (EC) 1907/2006, Azo dyes which, by reductive cleavage of one or more azo groups, may release one or more of the aromatic amines listed in Appendix 8, in detectable concentrations, i.e. above 30 ppm in the finished articles or in the dyed parts thereof, according to the testing methods listed in Appendix 10, shall not be used in textile and leather articles which may come into direct and prolonged contact with the human skin or oral cavity. 3. MDL = Method Detection Limit=5mg/kg, N.D. = Not detected (<MDL)

5 Page 5 / 6 Part 5: Disperse dyes Test Method(s): DIN Test results: No. Test item(s) MDL 1 Disperse blue1 5 N.D. 2 Disperse blue3 5 N.D. 3 Disperse blue7 5 N.D. 4 Disperse blue26 5 N.D. 5 Disperse blue35 5 N.D. 6 Disperse blue102 5 N.D. 7 Disperse blue106 5 N.D. 8 Disperse blue124 5 N.D. 9 Disperse brown1 5 N.D. 10 Disperse orange1 5 N.D. 11 Disperse orange3 5 N.D. 12 Disperse orange37/76 5 N.D. 13 Disperse red1 5 N.D. 14 Disperse red11 5 N.D. 15 Disperse red17 5 N.D. 16 Disperse yellow1 5 N.D. 17 Disperse yellow3 5 N.D. 18 Disperse yellow9 5 N.D. 19 Disperse yellow39 5 N.D. 20 Disperse yellow49 5 N.D. 21 Disperse orange N.D. 22 Disperse yellow 23 5 N.D. 2. MDL = Method Detection Limit 3. N.D. = Not detected (<MDL)

6 Page 6 / 6 Part 6: Organotin Test Requirement: According to article 20, Annex XVII of Regulation (EC) No 1907/2006 Test Method(s): With reference to DIN ISO 17353:2005, GC-MS Test Results: Test item MDL MCV Monobutyltin (MBT) N.D. Dibutyltin (DBT) N.D. Tributyltin (TBT) N.D. Triphenyltin (TPhT) N.D. 2. MDL = Method Detection Limit; MCV= Maximum Concentration Values 3. N.D. = Not detected (<MDL) Photo(s): & CIRS-JSUL (Mixed) ***The end of report***