Sensors and Actuators Sensors Physics
|
|
- Claire Marshall
- 5 years ago
- Views:
Transcription
1 Sensors and Actuators Sensors Physics Sander Stuijk Department of Electrical Engineering Electronic Systems
2 HEMOESISIVE SENSOS (Chapter 16.3)
3 3 emperature sensors placement excitation physical effect material thermal sensor contact passive thermal expansion metal bimetal contact active resistive effect metal D contact active resistive effect semiconductor silicon resistive contact active resistive effect polymer or ceramic thermistor contact passive thermoelectric effect conductor thermocouple contact active PN junction semiconductor non-contact passive pyroelectric effect pyroelectric pyroelectric non-contact active ultrasound - acoustic
4 4 hermoresistive effect resistivity of (semi)conductors depends on temperature temperature can be found by measuring resistance specific resistivity of a material m ne temperature dependency through number of free electrons (n) in semiconductors NC behavior: n ρ mean time between collisions (τ) in conductors PC behavior: τ ρ semiconductor conductor
5 5 esistance temperature detectors (Ds) specific resistivity of a material m ne mean time between collisions (τ) in conductors number of free electrons (n) in semiconductors D metal temperature sensor positive temperature coefficient (PC) relation between temperature and resistance n... ] reference temperature [ n 0 P100 D 0 resistance at 0 example P100 D α /K, α /K, α /K 3 almost linear relation between temperature and resistance
6 6 Silicon resistive sensors specific resistivity of a material m ne mean time between collisions (τ) in conductors number of free electrons (n) in semiconductors pure silicon four electrons in outer ring electrons in outer ring form covalent bonds with neighboring atoms these electrons are responsible for current +14 Si Si Si Si Si Si Si Si Si Si Si Si
7 7 Silicon resistive sensors specific resistivity of a material m ne mean time between collisions (τ) in conductors number of free electrons (n) in semiconductors Energy of electrons pure silicon four electrons in outer ring electrons in outer ring form covalent bonds with neighboring atoms these electrons are responsible for current these electrons are at = 0K in valence band increasing energy moves electrons to conduction band Si Fermi level Si Conduction band Valence band Si Si Si Si Si Si Si Si Si Si
8 8 Silicon resistive sensors specific resistivity of a material m ne mean time between collisions (τ) in conductors number of free electrons (n) in semiconductors pure silicon temperature increase lower resistance (NC behavior) n-doped silicon (Sb - Stibium) additional free electrons at given temperature which contribute to current mean time between collisions dominates resistivity device has PC behavior Si Si Si Si Si Sb Si Si Si Si Si Si
9 9 Silicon resistive sensor pure silicon has a negative temperature coefficient (NC) specific sensitivity ρ decreases when temperature increases doping with n-type impurity can change behavior to PC PC behavior only in limited range (up-to 00 C) above this temperature intrinsic behavior dominates =C n-doped pure silicon
10 10 Silicon resistive sensor silicon resistive sensor has typically a C of 0.7%/K non-linearity of the sensor is limited transfer function can be approximated with ] 0[1 1 0 example KY81-1 sensor silicon resistive sensor with n-doping range: -55 C to +150 C high long-term stability: ±0.05K/year almost linear transfer function α 1 = (Ω/Ω)/K α = (Ω/Ω)/K resistance: 1kΩ at 5 C sensitivity (at 5 C) ~ 7.9Ω/K 0
11 11 hermistor thermistor comes from thermally sensitive resistor thermistors are made by mixing doped oxides of metals leads to larger sensitivity then Ds which use only metals effect similar as seen in silicon resistive sensors temperature coefficient of thermistors PC when doping is heavy NC when doping is small only NC thermistors are useful for precision temperature measurement
12 1 NC thermistor relation between temperature and resistance is highly non-linear two different thermistors P100 D transfer function 0 reference temperature 0 e B(1/ 1/ 0 resistance at 0 (typically at 5 C) B (or β) characteristic temperature of the material 0 )
13 13 NC thermistor characteristic temperature is material and temperature dependent relation B and can be approximated as linear (small error) two-point calibration can be used to find B in certain range B ln( 1 / (1/ 1/ 0 / 1 ) ) 0 resistance at 0 1 resistance at example calibration data = 5000Ω at 5 C, = 144Ω at 60 C what is the characteristic temperature from 5 C to 60 C? 144 ln B / K 1 1 (73 60) K (73 5) K
14 14 NC thermistor characteristic temperature is material and temperature dependent relation B and can be approximated as linear (small error) two-point calibration can be used to find B in certain range B ln( 1 / (1/ 1/ 0 / 1 0 resistance at 0 1 resistance at 1 temperature coefficient of resistivity (C) ) ) C is often called relative sensitivity B(1/ 1/ 0 ) d / d 1 d0e B d non-linear - dependency 1 sensitive for low temperatures 0 0 sensitivity decreases quickly when temperature increases typical: α = -8%/ C (at cold side), α = -%/ C (at hot side)
15 15 NC thermistor characteristic temperature is material and temperature dependent relation B and can be approximated as linear (small error) two-point calibration can be used to find B in certain range B 0 resistance at 0 1 resistance at 1 temperature coefficient of resistivity (C) B(1/ 1/ 0 ) d / d 1 d0e B d example Siemens thermistor B = 4000K ln( 1 / (1/ 1/ 0 / 1 ) ) C (at 5 C): α = -4.5%/K 1 thermistor has a 1.5x larger C as a P100 D why do we prefer a large C? 0 0 larger C means larger sensitivity
16 16 NC thermistor models two-parameter model B(1/ 1/ model also known as simple model provides accuracy of ±0.7 C for 70 C range error due to non-linear relation B and 0 e 0 ) three or four parameter models exist provide higher accuracy more calibration points needed
17 17 NC thermistor models example - alternative thermistor model Ae B what value does A have when B = 400K and = 100kΩ at 5 C? B/ 5 100k 5 Ae A B/ 400K /(73K 5K) e e 5 5 what is the C of this device at 0 C and 100 C? at (0 C = 73K) it holds that B 400K 0 73K at (100 C = 373K) it holds that 400K K / K / K (relative) sensitivity decreases with increasing temperature
18 18 NC thermistor linearization relation between temperature and resistance is highly non-linear sensor will be connected to interface circuit hévenin equivalent resistance o as seen by interface circuit o V interface circuit sensor circuit o v o v m v v o B e e e B B o
19 resistance (Ω) 19 NC thermistor linearization example - resistance-temperature characteristic of sensor circuit 0 = 5kΩ, B = 4000K, =18500Ω sensor circuit V interface circuit o temperature (K) sensor circuit has smaller non-linearity error compared to thermistor reduction in non-linearity error is not for free... (why?) sensor circuit has smaller sensitivity compared to thermistor linearity and sensitivity form a trade-off
20 0 NC thermistor linearization sensitivity for temperature change of sensor circuit: o 0 e B(1/ 1/ 0 ) d o d d sensitivity of o is non-linear d d o d sensitivity for temperature change of thermistor: d d comparing sensitivity of sensor circuit and thermistor d 1 d o d d sensor circuit has lower sensitivity compared to thermistor alone non-linearity error will also be smaller
21 resistance (Ω) resistance (Ω) 1 NC thermistor linearization o o temperature (K) temperature (K) comparing sensitivity of sensor circuit and thermistor 1 d d o d d sensor circuit has lower sensitivity compared to thermistor alone non-linearity error will also be smaller
22 NC thermistor linearization linearity in range [ 1, 3 ] can be improved in measurement range by choosing constraints 1 3 o1 o o o3 it holds that o solving o for gives 1 1 Δ Δ (Ω) o1 o o3 the expression is independent from the model of this technique can be used for any nonlinear resistive sensor method minimizes non-linearity near the adjusting points Δ Δ (K)
23 9 NC thermistor self-heating current through NC thermistor causes self-heating similar to Ds P L is the thermal loss to the environment s, a thermistor, ambient temperature δ heat dissipation factor power consumption of the thermistor P D V i i C thermal capacity (mass x specific heat) steady-state condition d S dt 0 V ds C dt i V i i P L PD S heat accumulation rate heat loss rate a
24 30 NC thermistor self-heating current through NC thermistor causes self-heating similar to Ds self-heating can be minimized by minimizing current through use small supply voltage use large series resistor in front of use sensor with small duty-cycle voltage source
25 31 NC thermistor self-heating voltage-current characteristic for a thermistor in still air at 5 C constant (positive) resistance zero resistance ( current =voltage) negative resistance ( current voltage) increasing power dissipation increasing resistance negligible self-heating self-heating
26 3 NC thermistor self-heating voltage-current characteristic for a thermistor in still air at 5 C Δ=50 C Δ=100 C Δ=00 C Δ 0 C self-heating can lead to thermal run-away and destruction of sensor some applications use self-heating to get maximal voltage drop across sensor (e.g. flow rate sensor)
27 33 NC thermistor self-heating voltage-current characteristic for a thermistor in still air at 5 C V max voltage drop, max sensitivity V max I o I small current (negligible heating) use Ohm s law to find temperature increasing current: I P D Δ V
28 34 hermal flow sensors example - wind chill factor when cycling on a cold day, your hands are colder then when standing still air flow causes the hands of the cyclist to cool down by measuring the temperature of his hands, the cyclist can get a good measure of the air flow
29 35 hermal flow sensors construction three tubes immersed into a moving medium two tubes contain temperature detectors ( 0 and S ) detectors thermally coupled to medium detectors thermally isolated from structural elements mass equalizer ensures that medium moves through the detectors without turbulence
30 36 hermal flow sensors operation detector 0 measures the temperature of the flowing medium medium heated with heater detector S measures the elevated temperature
31 37 hermal flow sensors still medium heat dissipated from heater to both detectors heat moves out of the heater by thermal conduction and gravitational convection heater is closer to S then to 0 S will register a higher temperature then 0
32 38 hermal flow sensors moving medium heat dissipation increased due to forced convection increasing flow rate, leads to the higher heat dissipation this leads to a lower temperature registered by S thermal flow sensor measures the heat loss and converts it into the flow rate of the medium
33 39 hermal flow sensors non-linear relation between flow velocity v and temperature difference relation between flow velocity v and temperature difference K dq 1 v dt s 0 K calibration constant, ρ density of the medium, Q heat transfer Q depends on dissipation factor (velocity) 1.87
34 40 hermal flow sensors heater can be integrated into S by using it in self-heating mode relation between voltage across self-heating detector (e) and velocity of the flow (v) given by v K e S s K calibration constant ρ density of the medium
35 41 hermal flow sensors relation between voltage across self-heating detector (e) and velocity of the flow (v) suggests two method to measure flow v K e S s method 1 voltage (e) and resistance of detector S are kept constant and temperature difference is outputted method temperature difference is kept constant by a control circuit which regulates voltage (e) of the heater voltage (e) is output of the sensor method is easier to realize in miniature sensors
36 4 hermal flow sensors method 1 thermal flow sensor can be placed in a bridge circuit bridge is imbalanced at low flow rate high output voltage increasing flow heats detector S its temperature comes closer to temperature of 0 balances the bridge and decreases the output voltage voltage outputted by the sensor depends on the flow velocity on the medium
37 46 PC thermistors PC thermistor NC behavior till some temperature (point m) PC thermistors show abrupt change in resistance switch occurs around Curie temperature C temperature coefficient of resistivity (C) can be 00%/ C transfer function is not suitable for precision temperature measurement
38 47 PC thermistors example PC thermistor PC thermistor modeled with K 98.15K.3 what is the C for this PC thermistor at 5 C? C is defined as d d derivative of the given equation yields d 73.15K d 98.15K K at 5 C it holds that 1.3 d d 5 C K / K 98.15K 98.15K 98.15K
39 48 PC thermistors example PC thermistor PC thermistor modeled with K 98.15K.3 what is the C for this PC thermistor at 5 C? therefore C(5 C) d d 5 C d d 5 100% 0.77%/ K % is used to indicate the fractional change in resistance when a unit change in the temperature occurs
40 49 PC thermistors application: circuit protection short circuit of load causes PC to get very large resistance current in circuit goes to zero circuit resets itself when short circuit is removed PC characteristic provides build-in protection against overheating overheating will increase resistance increasing resistance will decrease current decreasing current will decrease self-heating
41 50 Comparing NC, PC thermistors and Ds NC thermistors versus Ds (+) higher resistivity (small lead-wire error) (+) higher sensitivity (up-to 1000x) (-) larger self-heating effect (-) smaller operating range (-) higher non-linearity (-) lower accuracy (±0.7 C) PC versus NC (+) build-in self-protection against overheating (-) complex temperature-resistance relation (partially NC behavior) (-) smaller operating range (some types only usable as switch) (-) not suitable for precision temperature measurement
Sensing, Computing, Actuating
Sensing, Computing, Actuating Sander Stuijk (s.stuijk@tue.nl) Department of Electrical Engineering Electronic Systems HEMOESISIVE SENSOS AND LINEAIZAION (Chapter.9, 5.11) 3 Applications discharge air temperature
More informationSensing, Computing, Actuating
Sensing, Computing, ctuating Sander Stuijk (s.stuijk@tue.nl) Department of Electrical Engineering Electronic Systems 2 THERMOELECTRIC EFFECT (Chapter 5.11) 3 Thermocouple cylinder head temperature (thermocouple)
More informationSensors and Actuators Sensors Physics
Sensors and ctuators Sensors Physics Sander Stuijk (s.stuijk@tue.nl) Department of Electrical Engineering Electronic Systems 2 THERMOELECTRIC SENSORS (Chapter 3.9, 16.4) 3 Thermoelectric effect thermoelectric
More informationModule 1, Add on math lesson Simultaneous Equations. Teacher. 45 minutes
Module 1, Add on math lesson Simultaneous Equations 45 minutes eacher Purpose of this lesson his lesson is designed to be incorporated into Module 1, core lesson 4, in which students learn about potential
More informationECNG3032 Control and Instrumentation I
sensor ECNG3032 Control and Instrumentation I Lecture 1 Temperature Sensors Sensors The sensor is the first element in the measurement system. Measurand Transducer Principle Excitation Signal Interface
More informationSENSORS and TRANSDUCERS
SENSORS and TRANSDUCERS Tadeusz Stepinski, Signaler och system The Thermal Energy Domain Physics» Seebeck effect» Peltier effect» Thomson effect Thermal effects in semiconductors Thermoelectric sensors
More informationCurrent and Resistance
Chapter 26 Current and Resistance Copyright 26-1 Electric Current As Fig. (a) reminds us, any isolated conducting loop regardless of whether it has an excess charge is all at the same potential. No electric
More informationI m. R s. Digital. R x. OhmmetersxSeries Shunt Digital. R m
µa Meter I I s I m s E Digital x I Voltmeter x x E µa Meter m Is OhmmetersxSeries Shunt Digital EIx= = ()E sm x mxvi= x Shunt Ohmmeter Shunt s x E µa Meter I m I m V m E ) ( v I E ) ( E v E v E I When
More informationTemperature Measurement
MECE 3320 Measurements & Instrumentation Temperature Measurement Dr. Isaac Choutapalli Department of Mechanical Engineering University of Texas Pan American Introduction Temperature is one of the most
More informationTemperature Measurements
Engineering 80 Spring 2015 Temperature Measurements SOURCE: http://www.eng.hmc.edu/newe80/pdfs/vishaythermdatasheet.pdf SOURCE: http://elcodis.com/photos/19/51/195143/to-92-3_standardbody to-226_straightlead.jpg
More informationCEE575 - Homework 1. Resistive Sensing: Due Monday, January 29
CEE575 - Homework 1 Resistive Sensing: Due Monday, January 29 Problem 1: Planes A metallic wire embedded in a strain gage is 4 cm long with a diameter of 0.1 mm. The gage is mounted on the upper surface
More informationTemperature Sensors & Measurement
Temperature Sensors & Measurement E80 Spring 2014 Contents Why measure temperature? Characteristics of interest Types of temperature sensors 1. Thermistor 2. RTD Sensor 3. Thermocouple 4. Integrated Silicon
More informationThermal Sensors and Actuators
Thermal Sensors and Actuators Part I Fundamentals of heat transfer Heat transfer occurs where there is a temperature gradient until an equilibrium is reached. Four major mechanism Thermal conduction Natural
More informationLecture 11 Temperature Sensing. ECE 5900/6900 Fundamentals of Sensor Design
EE 4900: Fundamentals of Sensor Design Lecture 11 Temperature Sensing 1 Temperature Sensing Q: What are we measuring? A: Temperature 2 SI Units: Celcius ( C), Kelvin (K) British Units: Fahrenheit ( F)
More informationREVISED HIGHER PHYSICS REVISION BOOKLET ELECTRONS AND ENERGY
REVSED HGHER PHYSCS REVSON BOOKLET ELECTRONS AND ENERGY Kinross High School Monitoring and measuring a.c. Alternating current: Mains supply a.c.; batteries/cells supply d.c. Electrons moving back and forth,
More informationChapters 24/25: Current, Circuits & Ohm s law Thursday September 29 th **Register your iclickers**
Chapters 24/25: Current, Circuits & Ohm s law Thursday September 29 th **Register your iclickers** Conductors under dynamic conditions Current, current density, drift velocity Ohm s law Types of conductor
More information4. I-V characteristics of electric
KL 4. - characteristics of electric conductors 4.1 ntroduction f an electric conductor is connected to a voltage source with voltage a current is produced. We define resistance being the ratio of the voltage
More informationPhysics 169. Luis anchordoqui. Kitt Peak National Observatory. Wednesday, March 8, 17
Physics 169 Kitt Peak National Observatory Luis anchordoqui 1 5.1 Ohm s Law and Resistance ELECTRIC CURRENT is defined as flow of electric charge through a cross-sectional area Convention i = dq dt Unit
More informationElectrons are shared in covalent bonds between atoms of Si. A bound electron has the lowest energy state.
Photovoltaics Basic Steps the generation of light-generated carriers; the collection of the light-generated carriers to generate a current; the generation of a large voltage across the solar cell; and
More informationEnergy Conversion in the Peltier Device
Laboratory exercise 4 Energy Conversion in the Peltier Device Preface The purpose of this exercise is to become familiar with the Peltier effect. Students will observe Peltier device working as a heat
More informationPart 2. Sensor and Transducer Instrument Selection Criteria (3 Hour)
Part 2 Sensor and Transducer Instrument Selection Criteria (3 Hour) At the end of this chapter, you should be able to: Describe the definition of sensor and transducer Determine the specification of control
More informationMeasurement of non-electrical quantities
Measurement of non-electrical quantities Measurement chain analog part digital part ef bias conditioning circuitry ef µc DSP SOC... C/A sensor A/C processing 2.718 CLK Sensor a converter that measures
More informationLecture 36: Temperatue Measurements
Lecture 36: Temperatue Measurements Contents Principle of thermocouples Materials for themocouples Cold junction compensation Compensating wires Selection of thermocouples Illustration of gas temperature
More informationConventional Paper I-2010
Conventional Paper I-010 1. (a) Sketch the covalent bonding of Si atoms in a intrinsic Si crystal Illustrate with sketches the formation of bonding in presence of donor and acceptor atoms. Sketch the energy
More informationPhysics 1214 Chapter 19: Current, Resistance, and Direct-Current Circuits
Physics 1214 Chapter 19: Current, Resistance, and Direct-Current Circuits 1 Current current: (also called electric current) is an motion of charge from one region of a conductor to another. Current When
More informationINSTRUMENTATION ECE Fourth Semester. Presented By:- Sumit Grover Lect., Deptt. of ECE
INSTRUMENTATION ECE Fourth Semester Presented By:- Sumit Grover Lect., Deptt. of ECE Detailed Contents Objectives Sensors and transducer Classification of transducers Temperature transducers Resistance
More informationTemperature measurement
emperature measurement BASICS Interest in emperature measurements appeared definitively later as respect to other quantities. emperature is an intensive quantity (a quantity strictly correlated to temperature
More informationResistance : R = ρ( ) units are Ohms ( 14 ) Resistor 100 ohms
Resistance : If we look a little more closely into how charge flows in a conductor, we see that the electron is essentially free to move about the metal conductor material. The electron roams about the
More informationLM34 - Precision Fahrenheit Temperature Sensor
- Precision Fahrenheit Temperature Sensor Features Typical Application Calibrated directly in degrees Fahrenheit Linear +10.0 mv/ F scale factor 1.0 F accuracy guaranteed (at +77 F) Parametric Table Supply
More informationMonday July 14. Capacitance demo slide 19 Capacitors in series and parallel slide 33 Elmo example
Monday July 14 Lecture 5 Capacitance demo slide 19 Capacitors in series and parallel slide 33 Elmo example Lecture 6 Currents and esistance Lecture 9 Circuits Wear Microphone 1 3 Lecture 6 Current and
More informationTunnel Diodes (Esaki Diode)
Tunnel Diodes (Esaki Diode) Tunnel diode is the p-n junction device that exhibits negative resistance. That means when the voltage is increased the current through it decreases. Esaki diodes was named
More informationCalculate the total resistance of this combination. (3)
1 The circuit shows a combination of three resistors. 22 Ω 47 Ω 620 Ω Calculate the total resistance of this combination. Total resistance = (Total for Question = 3 marks) 2 (a) Sketch a graph to show
More informationLevel 1 Physics, 2010
9 0 1 8 5 1 901850 For Supervisor s Level 1 Physics, 2010 90185 Demonstrate understanding of electricity and magnetism Credits: Five 2.00 pm Thursday 25 November 2010 Check that the National Student Number
More informationChapter 6 Temperature Measurement (Revision 2.0, 1/12/2009)
Chapter 6 emperature Measurement (Revision 2.0, /2/2009). Introduction his Chapter looks that various methods of temperature measurement. Historically, there are two temperature measurement scales: he
More informationSemiconductor Physics fall 2012 problems
Semiconductor Physics fall 2012 problems 1. An n-type sample of silicon has a uniform density N D = 10 16 atoms cm -3 of arsenic, and a p-type silicon sample has N A = 10 15 atoms cm -3 of boron. For each
More informationElectronic Circuits for Mechatronics ELCT 609 Lecture 2: PN Junctions (1)
Electronic Circuits for Mechatronics ELCT 609 Lecture 2: PN Junctions (1) Assistant Professor Office: C3.315 E-mail: eman.azab@guc.edu.eg 1 Electronic (Semiconductor) Devices P-N Junctions (Diodes): Physical
More informationDUBLIN INSTITUTE OF TECHNOLOGY Kevin Street, Dublin 8.
Question Sheet Page 1 of 5 Instructions for the student: Question 1 is compulsory [40 marks] Attempt any two other questions [30 marks per question] The following must be made available during the examination:
More informationProcess Control Instrumentation Technology Curtis D. Johnson Eighth Edition
Process Control Instrumentation Technology Curtis D. Johnson Eighth Edition Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world Visit us
More informationDigital Electronics Part II - Circuits
Digital Electronics Part - Circuits Dr.. J. Wassell Gates from Transistors ntroduction Logic circuits are non-linear, consequently we will introduce a graphical technique for analysing such circuits The
More informationChapter 27. Current and Resistance
Chapter 27 Current and Resistance Electric Current Most practical applications of electricity deal with electric currents. The electric charges move through some region of space. The resistor is a new
More informationHigher Physics. Electricity. Summary Notes. Monitoring and measuring a.c. Current, potential difference, power and resistance
Higher Physics Electricity Summary Notes Monitoring and measuring a.c. Current, potential difference, power and resistance Electrical sources and internal resistance Capacitors Conductors, semiconductors
More informationElectric Current. Equilibrium: Nonequilibrium: Electric current: E = 0 inside conductor. Mobile charge carriers undergo random motion.
Electric Current Equilibrium: E = 0 inside conductor. Mobile charge carriers undergo random motion. Nonequilibrium: E 0 inside conductor. Mobile charge carriers undergo random motion and drift. Positive
More informationMASSACHUSETTS INSTITUTE OF TECHNOLOGY /6.071 Introduction to Electronics, Signals and Measurement Spring 2006
MASSACHUSETTS INSTITUTE OF TECHNOLOGY 22.07/6.07 Introduction to Electronics, Signals and Measurement Spring 2006 Lab6. Resistor Networks 2. Experiment. Power rating of resistors. Power rating is a very
More informationSEMICONDUCTORS. Conductivity lies between conductors and insulators. The flow of charge in a metal results from the
SEMICONDUCTORS Conductivity lies between conductors and insulators The flow of charge in a metal results from the movement of electrons Electros are negatively charged particles (q=1.60x10-19 C ) The outermost
More informationLecture 6 Current and Resistance Ch. 26
Lecture 6 Current and esistance Ch. 6 Cartoon -nvention of the battery and Voltaic Cell Warm-up problem Topics What is current? Current density Conservation of Current esistance Temperature dependence
More information5V/400mA Low Drop Voltage ILE4275 TECHNICAL DATA
TECHNICAL DATA 5V/400mA Low Drop Voltage ILE4275 is integrated circuits of voltage regulator 5V/400 ma with low-drop voltage. The IC of voltage regulator 5V/400 ma are purposed to supply DC voltage 5V
More informationResistance Learning Outcomes
Resistance Learning Outcomes Define resistance and give its unit. Solve problems about resistance. State Ohm s Law. HL: Derive the formulas for resistors in series and parallel. Solve problems about resistors
More informationTemperature Measurement
Temperature Measurement Temperature is one of the most common measurements What is Temperature? Intuitively understood as sensation of hot/cold Early Researchers: Galileo (1564-1642) Newton (1642-1727)
More informationPhysics Department. CfE Higher Unit 3: Electricity. Problem Booklet
Physics Department CfE Higher Unit 3: Electricity Problem Booklet Name Class 1 Contents Exercise 1: Monitoring and measuring a.c. Exercise 2: Current, voltage, power and resistance Exercise 3: Electrical
More informationElectro - Principles I
Electro - Principles I Page 10-1 Atomic Theory It is necessary to know what goes on at the atomic level of a semiconductor so the characteristics of the semiconductor can be understood. In many cases a
More informationUnderstanding Hot-Wire Anemometry
Thermal Minutes Understanding Hot-Wire Anemometry Introduction Hot-wire anemometry is a technique for measuring the velocity of fluids, and can be used in many different fields. A hot-wire anemometer consists
More informationElectricity and Magnetism Current and Resistance Ohm s Law Exotic Conductors Power
Electricity and Magnetism Current and Resistance Ohm s Law Exotic Conductors Power Lana Sheridan De Anza College Feb 6, 2018 Last time resistance resistivity conductivity Ohm s Law Overview Drude model
More informationCurrent. I = ei e = en e Av d. The current, which is Coulomb s per second, is simply
Current The current, which is Coulomb s per second, is simply I = ei e = en e Av d e is the charge is the electron! ne is the density of electrons! A is the cross sectional area of the wire! vd is the
More informationResistance Learning Outcomes. Resistance Learning Outcomes. Resistance
Resistance Learning Outcomes Define resistance and give its unit. Solve problems about resistance. State Ohm s Law. HL: Derive the formulas for resistors in series and parallel. Solve problems about resistors
More informationIntroduction to Semiconductor Devices
Physics 233 Experiment 48 Introduction to Semiconductor Devices References 1. G.W. Neudeck, The PN Junction Diode, Addison-Wesley MA 1989 2. Background notes (Appendix A) 3. Specification sheet for Diode
More informationVeerapong Kanchanawongkul*
Using LabVIEW to Development of Temperature Measurement System with Thermocouple and Thermistor AIS 08 Veerapong Kanchanawongkul* Department of Mechanical Engineering, Faculty of Engineering, South-East
More information3/17/2009 PHYS202 SPRING Lecture notes Electric Circuits
PHYS202 SPRING 2009 Lecture notes Electric Circuits 1 Batteries A battery is a device that provides a potential difference to two terminals. Different metals in an electrolyte will create a potential difference,
More informationChapter 27. Current And Resistance
Chapter 27 Current And Resistance Electric Current Electric current is the rate of flow of charge through some region of space The SI unit of current is the ampere (A) 1 A = 1 C / s The symbol for electric
More informationSemiconductor Physics
Semiconductor Physics Motivation Is it possible that there might be current flowing in a conductor (or a semiconductor) even when there is no potential difference supplied across its ends? Look at the
More informationIntroduction to Semiconductor Devices
Physics 233 Experiment 48 Introduction to Semiconductor Devices References 1. G.W. Neudeck, The PN Junction Diode, Addison-Wesley MA 1989 2. Background notes (Appendix A) 3. Specification sheet for Diode
More informationBiosensors and Instrumentation: Tutorial 2
Biosensors and Instrumentation: Tutorial 2. One of the most straightforward methods of monitoring temperature is to use the thermal variation of a resistor... Suggest a possible problem with the use of
More informationChapter 26 Current and Resistance
Chapter 26 Current and Resistance Electric Current Although an electric current is a stream of moving charges, not all moving charges constitute an electric current. If there is to be an electric current
More informationLecture 2. Introduction to semiconductors Structures and characteristics in semiconductors
Lecture 2 Introduction to semiconductors Structures and characteristics in semiconductors Semiconductor p-n junction Metal Oxide Silicon structure Semiconductor contact Literature Glen F. Knoll, Radiation
More informationCharge Carriers in Semiconductor
Charge Carriers in Semiconductor To understand PN junction s IV characteristics, it is important to understand charge carriers behavior in solids, how to modify carrier densities, and different mechanisms
More informationTransducer. A device to which change or converts physical quantity in a more easily measurable quantity. Transducer. (Input) Sensor.
Transducer A device to which change or converts physical quantity in a more easily measurable quantity Transducer (Input) Sensor (Output) Actuator Sensor A device which senses and detects the physical
More informationSupplementary Information for On-chip cooling by superlattice based thin-film thermoelectrics
Supplementary Information for On-chip cooling by superlattice based thin-film thermoelectrics Table S1 Comparison of cooling performance of various thermoelectric (TE) materials and device architectures
More informationEXPERIMENT ET: ENERGY TRANSFORMATION & SPECIFIC HEAT
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department Physics 8.01X Fall 2000 EXPERIMENT ET: ENERGY TRANSFORMATION & SPECIFIC HEAT We have introduced different types of energy which help us describe
More informationThermal System Closed-Loop Temperature Control
Thermal System Closed-Loop Temperature Control aluminum plate thin-film resistive heater ceramic insulation conduction and convection heat transfer AD590 temperature sensor microcontroller on-off closed-loop
More informationExperiment 5: Thermocouples (tbc 1/14/2007, revised 3/16/2007, 3/22,2007, 2/23/2009, 3/13/2011)
Experiment 5: Thermocouples (tbc 1/14/2007, revised 3/16/2007, 3/22,2007, 2/23/2009, 3/13/2011) Objective: To implement a thermocouple circuit for temperature sensing. I. Introduction to Thermocouples
More informationElectric Current. Chapter 17. Electric Current, cont QUICK QUIZ Current and Resistance. Sections: 1, 3, 4, 6, 7, 9
Electric Current Chapter 17 Current and Resistance Sections: 1, 3, 4, 6, 7, 9 Whenever electric charges of like signs move, an electric current is said to exist The current is the rate at which the charge
More informationSemiconductors. Semiconductors also can collect and generate photons, so they are important in optoelectronic or photonic applications.
Semiconductors Semiconducting materials have electrical properties that fall between true conductors, (like metals) which are always highly conducting and insulators (like glass or plastic or common ceramics)
More informationASEN 2002 Experimental Laboratory 1: Temperature Measurement and an Blow Dryer Test
ASEN 2002 Experimental Laboratory 1: Temperature Measurement and an Blow Dryer Test Assigned 6 September 2000 Individual Lab Reports due 3 October 2000 OBJECTIVES Learn the basic concepts and definitions
More informationIntroduction to AC Circuits (Capacitors and Inductors)
Introduction to AC Circuits (Capacitors and Inductors) Amin Electronics and Electrical Communications Engineering Department (EECE) Cairo University elc.n102.eng@gmail.com http://scholar.cu.edu.eg/refky/
More informationChapter 27: Current and Resistance
Chapter 7: Current and esistance In this section of the course we will be studying the flow of electric charge, current, in a circuit. We have already seen electric current when we first discussed electric
More informationNTC Thermistors [From Philips Data Handbook PA ]
NTC Thermistors [From Philips Data Handbook PA02 1989] Definition and composition Negative temperature coefficient thermistors (NTCs) are resistive components, of which the resistance decreases as temperature
More informationCurrent and Resistance
Current and Resistance 1 Define the current. Understand the microscopic description of current. Discuss the rat at which the power transfer to a device in an electric current. 2 2-1 Electric current 2-2
More informationHigher Physics Electricity Notes
Higher Physics Electricity Notes Teachers Booklet Learning Outcomes Monitoring and measuring a.c. This builds on information from Electricity and Energy booklet 1: Electrical charge carriers and fields.
More informationIntegrated measuring system for MEMS
Integrated measuring system for MEMS Thermal characterization of gas flows under slip-flow regime Alice Vittoriosi May 16, 2011 I NSTITUTE FOR M ICRO P ROCESS E NGINEERING - T HERMAL P ROCESS E NGINEERING
More informationNanoelectronic Thermoelectric Energy Generation
Nanoelectronic Thermoelectric Energy Generation Lourdes Ferre Llin l.ferre-llin.1@research.gla.ac.uk 1 Overview: Brief introduction on Thermoelectric generators. Goal of the project. Fabrication and Measurements
More informationMeasurements & Instrumentation. Module 3: Temperature Sensors
Measurements & Instrumentation PREPARED BY Academic Services Unit August 2013 Institute of Applied Technology, 2013 Module Objectives Upon successful completion of this module, students should be able
More informationChapter 27. Current and Resistance
Chapter 27 Current and Resistance Electric Current Most practical applications of electricity deal with electric currents. The electric charges move through some region of space. The resistor is a new
More informationReview of Semiconductor Fundamentals
ECE 541/ME 541 Microelectronic Fabrication Techniques Review of Semiconductor Fundamentals Zheng Yang (ERF 3017, email: yangzhen@uic.edu) Page 1 Semiconductor A semiconductor is an almost insulating material,
More informationUnit IV Semiconductors Engineering Physics
Introduction A semiconductor is a material that has a resistivity lies between that of a conductor and an insulator. The conductivity of a semiconductor material can be varied under an external electrical
More informationPhysics 142 Steady Currents Page 1. Steady Currents
Physics 142 Steady Currents Page 1 Steady Currents If at first you don t succeed, try, try again. Then quit. No sense being a damn fool about it. W.C. Fields Electric current: the slow average drift of
More informationVersion 001 CIRCUITS holland (1290) 1
Version CIRCUITS holland (9) This print-out should have questions Multiple-choice questions may continue on the next column or page find all choices before answering AP M 99 MC points The power dissipated
More informationA semiconductor is an almost insulating material, in which by contamination (doping) positive or negative charge carriers can be introduced.
Semiconductor A semiconductor is an almost insulating material, in which by contamination (doping) positive or negative charge carriers can be introduced. Page 2 Semiconductor materials Page 3 Energy levels
More informationChapter 3: Electric Current And Direct-Current Circuits
Chapter 3: Electric Current And Direct-Current Circuits 3.1 Electric Conduction 3.1.1 Describe the microscopic model of current Mechanism of Electric Conduction in Metals Before applying electric field
More informationElectronics The basics of semiconductor physics
Electronics The basics of semiconductor physics Prof. Márta Rencz, Gergely Nagy BME DED September 16, 2013 The basic properties of semiconductors Semiconductors conductance is between that of conductors
More informationTHERMOCOUPLE CHARACTERISTICS TRAINER
THERMOCOUPLE CHARACTERISTICS TRAINER (Model No : ) User Manual Version 2.0 Technical Clarification /Suggestion : / Technical Support Division, Vi Microsystems Pvt. Ltd., Plot No :75,Electronics Estate,
More informationChapter 3: Current and Resistance. Direct Current Circuits
Chapter 3: Current and Resistance. Direct Current Circuits 3.1. Electric Current 3.2. Resistance and Resistivity 3.3. Ohm s Law and a Microscopic View of Ohm s Law 3.4. Semiconductors and Superconductors
More informationLesson 8 Electrical Properties of Materials. A. Definition: Current is defined as the rate at which charge flows through a surface:
Lesson 8 Electrical Properties of Materials I. Current I A. Definition: Current is defined as the rate at which charge flows through a surface: + + B. Direction: The direction of positive current flow
More informationHIGH TEMPERATURE RESISTANT MATERIALS HIGH-TEMPERATURE ELECTRONIC
HIGH TEMPERATURE RESISTANT MATERIALS HIGH-TEMPERATURE ELECTRONIC ELECTRONIC SYSTEM Electronics system is an integration of multiple, diverse materials with specially designed functionality based on their
More informationITT Technical Institute ET215 Devices I Unit 1
ITT Technical Institute ET215 Devices I Unit 1 Chapter 1 Chapter 2, Sections 2.1-2.4 Chapter 1 Basic Concepts of Analog Circuits Recall ET115 & ET145 Ohms Law I = V/R If voltage across a resistor increases
More informationPHYSICS EXPERIMENTS 133. P (x 0,y 0 )
RvsT-1 Week 3: Recitation Electric field of a continuous charge distribution Q1. Find the electric field at point (x 0, y 0 ) due a thin rod (length L) of charge with uniform linear charge density and
More informationLecture #3. Review: Power
Lecture #3 OUTLINE Power calculations Circuit elements Voltage and current sources Electrical resistance (Ohm s law) Kirchhoff s laws Reading Chapter 2 Lecture 3, Slide 1 Review: Power If an element is
More informationLecture 1. OUTLINE Basic Semiconductor Physics. Reading: Chapter 2.1. Semiconductors Intrinsic (undoped) silicon Doping Carrier concentrations
Lecture 1 OUTLINE Basic Semiconductor Physics Semiconductors Intrinsic (undoped) silicon Doping Carrier concentrations Reading: Chapter 2.1 EE105 Fall 2007 Lecture 1, Slide 1 What is a Semiconductor? Low
More informationChapter 26 & 27. Electric Current and Direct- Current Circuits
Chapter 26 & 27 Electric Current and Direct- Current Circuits Electric Current and Direct- Current Circuits Current and Motion of Charges Resistance and Ohm s Law Energy in Electric Circuits Combination
More informationSRI VIDYA COLLEGE OF ENGINEERING AND TECHNOLOGY VIRUDHUNAGAR Department of Electronics and Communication Engineering
SRI VIDYA COLLEGE OF ENGINEERING AND TECHNOLOGY VIRUDHUNAGAR Department of Electronics and Communication Engineering Class/Sem:I ECE/II Question Bank for EC6201-ELECTRONIC DEVICES 1.What do u meant by
More informationJunction Diodes. Tim Sumner, Imperial College, Rm: 1009, x /18/2006
Junction Diodes Most elementary solid state junction electronic devices. They conduct in one direction (almost correct). Useful when one converts from AC to DC (rectifier). But today diodes have a wide
More informationfehmibardak.cbu.tr Temporary Office 348, Mühendislik Fakültesi B Blok
fehmibardak.cbu.tr Temporary Office 348, Mühendislik Fakültesi B Blok 1 Course Progress Introductory level Electrostatic, Coulomb s Law Electric Field, Gauss Law Magnetic field, Maxwell s Equations Current,
More information