Unit B-1: List of Subjects
|
|
- Adela Hudson
- 6 years ago
- Views:
Transcription
1 ES31 Energy Transfer Fundamentals Unit B: The First Law of Thermodynamics ROAD MAP... B-1: The Concept of Energy B-: Work Interactions B-3: First Law of Thermodynamics B-4: Heat Transfer Fundamentals Unit B-1: List of Subjects Conservation of Energy Energy of a System Energy Interactions and Transfer Thermodynamic Processes
2 PAGE 1 of 8 Conservation of Energy A refrigerator operating with its door open in a well-sealed and well-insulated room A fan running in a well-sealed and well-insulated room will raise the temperature of air in the room CONSERVATION OF ENERGY PRINCIPLE Conservation of Energy means (as an exact sense) the conservation of ONLY the quantity of energy (the statement of the first law of thermodynamics) The average room temperature... will it increase, decrease, or remain constant? A refrigerator operating its door open in a well-sealed and well-insulated room A fan running in a well-sealed and well-insulated room Electricity (the higher quality of energy) can always be converted to an equal amount of thermal energy (or often called just heat ) However, only a small fraction of thermal energy (the lower quality of energy) can be converted back to electricity ENERGY OF A SYSTEM: THREE TYPES OF ENERGY Internal Energy (U) Potential Energy (PE) PE mgz where, m = mass of the system, g = gravitational acceleration, and z = height or elevation V Kinetic Energy (KE) KE m where, m = mass of the system and V = velocity
3 PAGE of 8 Energy of a System (1) Internal energy Potential Energy Kinetic energy ENERGY PER UNIT MASS It is often convenient to define energy per unit mass (amount of energy for a given unit mass of the system): Internal Energy per unit mass (u) PE Potential Energy per unit mass (pe) pe gz m KE V Kinetic Energy per unit mass (ke) ke m TOTAL ENERGY OF A SYSTEM The total energy of a system (E) or the total energy per unit mass of a system (e = E / m) is the total sum of three types of energy: Total energy of a system is: E = U + KE + PE = V U m mgz Total energy of a system (per unit mass) is: e = u + ke + pe = V u gz ENERGY OF A CLOSED SYSTEM Most closed systems (control mass or CM ) remain stationary during a process and thus experience no change in their kinetic and potential energies. Closed systems whose velocity and elevation of the center of gravity remain constant during a process are frequently referred to as stationary systems.
4 PAGE 3 of 8 Energy of a System () Mass and energy flow rates associated with the flow of stream in a pipe Energy Rate (Power) ENERGY OF AN OPEN SYSTEM Control Volumes (CVs) typically involve fluid flow with a velocity ( convection ), and it is convenient to express the energy flow associated with a fluid stream in the rate form. The mass flow rate is defined as: m V AV c avg (kg/s) where, = mass of the system, Ac = cross-sectional area of flow, and Vavg = average flow velocity normal to Ac The energy flow rate (called, power ) is defined as: E me (kj/s or kw) MECHANICAL ENERGY OF A SYSTEM Mechanical energy is the form of energy that can be converted to mechanical work. If an ideal mechanical device exists, this is the amount of energy that can be completely converted to work. p V Mechanical energy per unit mass is defined as: emech gz Flow Work (per unit mass) Kinetic Energy (per unit mass) Potential Energy (per unit mass) Mechanical energy rate (or power ) is defined as: p V Emech memech m gz p p1 V V1 e g z z Change in mechanical energy for incompressible fluid: p p V V mech In energy rate (power) form: E me m g z z mech mech 1
5 PAGE 4 of 8 EXERCISE B-1-1 (Do-It-Yourself) A site evaluated for a potential wind farm is observed to have steady winds at a speed of 8.5 m/s (shown in the figure). Determine the available wind energy (a) per unit mass (in J/kg ), (b) for a mass of 10 kg of air (in J ), and (c) for a flow rate of 1,154 kg/s for air (in kw ). Potential site for a wind farm Solution A site with a specified wind speed is considered. Wind energy per unit mass, for a specified mass, and for a given mass flow rate of air are to be determined. Assumptions Wind flows steadily at the specified speed. The only form of energy that can be harvested from air is the kinetic energy, which can be captured by a wind turbine. Analysis (a) Wind energy per unit mass of air is: V 8.5 m/s e ke 36.1 J/kg (b) Wind energy for an air mass of 10 kg is: E me 10 kg36.1 J/kg 361 J (c) Wind energy for a mass flow rate of 1,154 kg/s is: E me 1,154 kg/s36.1 J/kg 41,700 W (41.7 kw) Discussion The specified mass flow rate corresponds to a 1-m diameter flow section, if the air density is 1. kg/m 3. This analysis concludes that a wind turbine with a turbine diameter of 1 m has a power generation potential of 41.7 kw
6 PAGE 5 of 8 At a certain location, strong wind is blowing steadily at 10 m/s. Determine the mechanical energy of air per unit mass (in J/kg ) and the power generation potential of a wind turbine with 60-m-diameter blades at that location (in kw ). Take the air density to be 1.5 kg/m 3. Assumption The wind is blowing steadily at a constant uniform velocity Properties 3 The density of air is given: 1.5 kg/m Analysis Kinetic energy of the wind is the only form of mechanical energy that can be converted to work. Therefore, the power potential of the wind is essentially the kinetic energy of the wind: V 10 m/s emech ke 50 J/kg Mass flow rate can be defined as: 3 m VA V D 1.5 kg/m 10 m/s 60 m 35,340 kg/s 4 4 The power generation potential is, therefore: Emech memech 35,340 kg/s50 J/kg 1,770,000 W (1,770 kw) Discussion The power generation of a wind turbine is proportional to the cube of the wind velocity, and thus the power generation potential will depend strongly on the wind conditions.
7 PAGE 6 of 8 Energy Interactions and Transfer Energy can cross the boundaries of a closed system in the form of heat and work Directions of heat and work transfer WORK, ENERGY, AND POWER The unit of work is defined as: force applied distance moved The unit of work and energy are identical (exact same unit) The work can be understood as an amount of energy transferred through interaction The unit of power is defined as: energy time The power can be understood as a time rate of change of energy or energy transferred through interaction ENERGY INTERACTIONS Energy is transferred by IN or OUT interactions to or from Control Mass (CM) or Control Volume (CV) across the system boundary Heat interaction: is defined as energy transfer by temperature difference (temperature flow) Heat Energy IN = Qin and Heat Energy OUT = Qout Work interaction is defined as energy transfer by work (work input/output) Work Energy IN = Win and Work Energy OUT = Wout Heat and work interactions per unit mass can be defined as: W w and m Q q (kj/kg) m
8 PAGE 7 of 8 Thermodynamic Processes During an adiabatic process, a system exchanges no heat with its surroundings Properties are point functions; but heat and work are path functions (their magnitudes depend on the path followed) THERMODYNAMIC PROCESSES In thermodynamic analysis, one must clearly understand the importance of process Properties are point functions d V V ( Change of volume is independent to the process path: V VV 1) 1 Heat and work interactions are path functions (depends on the path followed during the process) W W1 W ( Work interaction depends on the process path: W1 W W1 1 ) THERMODYNAMIC MODELS FOR SIMPLIFIED ANALYSIS Isolated system: assumed no interactions of any kind across the system boundary Adiabatic process: no heat interaction (no energy transfer due to temperature difference) Isothermal process: constant temperature throughout the process
9 PAGE 8 of 8 EXERCISE B-1- (Do-It-Yourself) A candle is burning in a well-insulated room (isolated system). Taking the room (the air plus the candle) as the system, determine (a) if there is any heat transfer (across the boundary) during this burning process and (b) if there is any change in the internal energy of the system. Solution A candle burning in a well-insulated room is considered. It is to be determined whether there is any heat transfer and any change in internal energy. Analysis (a) The interior surfaces of the room from the system boundary is indicated by the dashed lines in the figure. Heat is recognized as it crosses the boundaries. Since the room is well insulated, we have an adiabatic system and no heat will pass through the boundaries. Q 0 (b) The internal energy involves energies that exist in various forms (sensible, latent, chemical, nuclear). During the process, part of the chemical energy is converted to sensible energy. However, there is no increase or decrease in the total internal energy of the system. U 0 Discussions Sensible Energy: the portion of the internal energy associated with the kinetic energies of the molecules (translation, rotation, and vibration of molecules) Latent Energy: the portion of the internal energy associated with the phase of the system (phase-change will cause the change in internal energy: the gas phase is at a higher internal energy level than liquid or solid phases) Chemical Energy: the portion of the internal energy associated with atomic bonds in a molecule (chemical reaction causes the destruction of atomic bonds and will change the internal energy) Nuclear Energy: the tremendous amount of energy associated with the strong bonds within the nucleus (can be released only through fusion or fission)
Thermodynamics ENGR360-MEP112 LECTURE 3
Thermodynamics ENGR360-MEP11 LECTURE 3 ENERGY, ENERGY TRANSFER, AND ENERGY ANALYSIS Objectives: 1. Introduce the concept of energy and define its various forms.. Discuss the nature of internal energy.
More informationPTT 277/3 APPLIED THERMODYNAMICS SEM 1 (2013/2014)
PTT 77/3 APPLIED THERMODYNAMICS SEM 1 (013/014) 1 Energy can exist in numerous forms: Thermal Mechanical Kinetic Potential Electric Magnetic Chemical Nuclear The total energy of a system on a unit mass:
More informationThermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA
Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA Dr. Walid A. Aissa Associate Professor, Mech. Engg. Dept. Faculty of Engineering
More informationWeek 2. Energy, Energy Transfer, And General Energy Analysis
Week 2. Energy, Energy Transfer, And General Energy Analysis Objectives 1. Introduce the concept of energy and define its various forms 2. Discuss the nature of internal energy 3. Define the concept of
More information- Apply closed system energy balances, observe sign convention for work and heat transfer.
CHAPTER : ENERGY AND THE FIRST LAW OF THERMODYNAMICS Objectives: - In this chapter we discuss energy and develop equations for applying the principle of conservation of energy. Learning Outcomes: - Demonstrate
More informationChapter 5. Mass and Energy Analysis of Control Volumes
Chapter 5 Mass and Energy Analysis of Control Volumes Conservation Principles for Control volumes The conservation of mass and the conservation of energy principles for open systems (or control volumes)
More informationThe First Law of Thermodynamics. By: Yidnekachew Messele
The First Law of Thermodynamics By: Yidnekachew Messele It is the law that relates the various forms of energies for system of different types. It is simply the expression of the conservation of energy
More informationChapter 5. Mass and Energy Analysis of Control Volumes. by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn
Chapter 5 Mass and Energy Analysis of Control Volumes by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Reference: Cengel, Yunus A. and Michael A. Boles, Thermodynamics:
More informationCHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES
Thermodynamics: An Engineering Approach 8th Edition in SI Units Yunus A. Çengel, Michael A. Boles McGraw-Hill, 2015 CHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES Lecture slides by Dr. Fawzi Elfghi
More informationEngineering Thermodynamics. Chapter 3. Energy Transport by Heat, Work and Mass
Chapter 3 Energy Transport y Heat, ork and Mass 3. Energy of a System Energy can e viewed as the aility to cause change. Energy can exist in numerous forms such as thermal, mechanical, kinetic, potential,
More informationfirst law of ThermodyNamics
first law of ThermodyNamics First law of thermodynamics - Principle of conservation of energy - Energy can be neither created nor destroyed Basic statement When any closed system is taken through a cycle,
More informationFirst Law of Thermodynamics Closed Systems
First Law of Thermodynamics Closed Systems Content The First Law of Thermodynamics Energy Balance Energy Change of a System Mechanisms of Energy Transfer First Law of Thermodynamics in Closed Systems Moving
More informationThermodynamics ENGR360-MEP112 LECTURE 7
Thermodynamics ENGR360-MEP11 LECTURE 7 Thermodynamics ENGR360/MEP11 Objectives: 1. Conservation of mass principle.. Conservation of energy principle applied to control volumes (first law of thermodynamics).
More informationChapter 5: Mass, Bernoulli, and Energy Equations
Chapter 5: Mass, Bernoulli, and Energy Equations Introduction This chapter deals with 3 equations commonly used in fluid mechanics The mass equation is an expression of the conservation of mass principle.
More information1 st Law Analysis of Control Volume (open system) Chapter 6
1 st Law Analysis of Control Volume (open system) Chapter 6 In chapter 5, we did 1st law analysis for a control mass (closed system). In this chapter the analysis of the 1st law will be on a control volume
More information12/21/2014 7:39 PM. Chapter 2. Energy and the 1st Law of Thermodynamics. Dr. Mohammad Suliman Abuhaiba, PE
Chapter 2 Energy and the 1st Law of Thermodynamics 1 2 Homework Assignment # 2 Problems: 1, 7, 14, 20, 30, 36, 42, 49, 56 Design and open end problem: 2.1D Due Monday 22/12/2014 3 Work and Kinetic Energy
More informationWhere F1 is the force and dl1 is the infinitesimal displacement, but F1 = p1a1
In order to force the fluid to flow across the boundary of the system against a pressure p1, work is done on the boundary of the system. The amount of work done is dw = - F1.dl1, Where F1 is the force
More informationChapter 1: Basic Concepts of Thermodynamics. Thermodynamics and Energy. Dimensions and Units
Chapter 1: Basic Concepts of Thermodynamics Every science has its own unique vocabulary associated with it. recise definition of basic concepts forms a sound foundation for development of a science and
More informationChapter 5: The First Law of Thermodynamics: Closed Systems
Chapter 5: The First Law of Thermodynamics: Closed Systems The first law of thermodynamics can be simply stated as follows: during an interaction between a system and its surroundings, the amount of energy
More informationTHERMODYNAMICS, FLUID AND PLANT PROCESSES. The tutorials are drawn from other subjects so the solutions are identified by the appropriate tutorial.
THERMODYNAMICS, FLUID AND PLANT PROCESSES The tutorials are drawn from other subjects so the solutions are identified by the appropriate tutorial. THERMODYNAMICS TUTORIAL 2 THERMODYNAMIC PRINCIPLES SAE
More informationTHE FIRST LAW APPLIED TO STEADY FLOW PROCESSES
Chapter 10 THE FIRST LAW APPLIED TO STEADY FLOW PROCESSES It is not the sun to overtake the moon, nor doth the night outstrip theday.theyfloateachinanorbit. The Holy Qur-ān In many engineering applications,
More informationEnergy Transport by. By: Yidnekachew Messele. Their sum constitutes the total energy E of a system.
Energy Transport y Heat, ork and Mass By: Yidnekachew Messele Energy of a System Energy can e viewed as the aility to cause change. Energy can exist in numerous forms such as thermal, mechanical, kinetic,
More informationIntroduction CHAPTER Prime Movers. 1.2 Sources of Energy
Introduction CHAPTER 1 1.1 Prime Movers Prime mover is a device which converts natural source of energy into mechanical work to drive machines for various applications. In olden days, man had to depend
More informationToday lecture. 1. Entropy change in an isolated system 2. Exergy
Today lecture 1. Entropy change in an isolated system. Exergy - What is exergy? - Reversible Work & Irreversibility - Second-Law Efficiency - Exergy change of a system For a fixed mass For a flow stream
More informationENERGY TRANSFER BY WORK: Electrical Work: When N Coulombs of electrical charge move through a potential difference V
Weight, W = mg Where m=mass, g=gravitational acceleration ENERGY TRANSFER BY WOR: Sign convention: Work done on a system = (+) Work done by a system = (-) Density, ρ = m V kg m 3 Where m=mass, V =Volume
More informationExergy and the Dead State
EXERGY The energy content of the universe is constant, just as its mass content is. Yet at times of crisis we are bombarded with speeches and articles on how to conserve energy. As engineers, we know that
More informationChapter 5: Mass, Bernoulli, and
and Energy Equations 5-1 Introduction 5-2 Conservation of Mass 5-3 Mechanical Energy 5-4 General Energy Equation 5-5 Energy Analysis of Steady Flows 5-6 The Bernoulli Equation 5-1 Introduction This chapter
More informationENT 254: Applied Thermodynamics
ENT 54: Applied Thermodynamics Mr. Azizul bin Mohamad Mechanical Engineering Program School of Mechatronic Engineering Universiti Malaysia Perlis (UniMAP) azizul@unimap.edu.my 019-4747351 04-9798679 Chapter
More information2012 Thermodynamics Division C
Team: Team Number: Team Member Names: 1. 2. Instructions: Answer all questions on the test paper. If you need more room, you may attach extra paper. The test is worth a total of 50 points. Show all work
More informationFirst Law of Thermodynamics
First Law of Thermodynamics During an interaction between a system and its surroundings, the amount of energy gained by the system must be exactly equal to the amount of energy lost by the surroundings.
More informationChapter 8. The increased awareness that the world s energy EXERGY: A MEASURE OF WORK POTENTIAL. Objectives
Chapter 8 EXERGY: A MEASURE OF WORK POTENTIAL The increased awareness that the world s energy resources are limited has caused many countries to reexamine their energy policies and take drastic measures
More informationRelationship to Thermodynamics. Chapter One Section 1.3
Relationship to Thermodynamics Chapter One Section 1.3 Alternative Formulations Alternative Formulations Time Basis: CONSERVATION OF ENERGY (FIRST LAW OF THERMODYNAMICS) An important tool in heat transfer
More information2. Describe the second law in terms of adiabatic and reversible processes.
Lecture #3 1 Lecture 3 Objectives: Students will be able to: 1. Describe the first law in terms of heat and work interactions.. Describe the second law in terms of adiabatic and reversible processes. 3.
More informationObjectives. Conservation of mass principle: Mass Equation The Bernoulli equation Conservation of energy principle: Energy equation
Objectives Conservation of mass principle: Mass Equation The Bernoulli equation Conservation of energy principle: Energy equation Conservation of Mass Conservation of Mass Mass, like energy, is a conserved
More informationKNOWN: Pressure, temperature, and velocity of steam entering a 1.6-cm-diameter pipe.
4.3 Steam enters a.6-cm-diameter pipe at 80 bar and 600 o C with a velocity of 50 m/s. Determine the mass flow rate, in kg/s. KNOWN: Pressure, temperature, and velocity of steam entering a.6-cm-diameter
More information3. First Law of Thermodynamics and Energy Equation
3. First Law of Thermodynamics and Energy Equation 3. The First Law of Thermodynamics for a ontrol Mass Undergoing a ycle The first law for a control mass undergoing a cycle can be written as Q W Q net(cycle)
More informationTwo mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW SVCET
Two mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW 1. What do you understand by pure substance? A pure substance is defined as one that is homogeneous and invariable in chemical composition
More informationENERGY AND FIRST LAW OF THERMODYNAMICS. By Ertanto Vetra
ENERGY AND FIRST LAW OF THERMODYNAMICS 1 By Ertanto Vetra Objective Introduce the concept of energy and define its various forms. Discuss the nature of internal energy. Define the concept of heat and the
More informationCONCEPTS AND DEFINITIONS. Prepared by Engr. John Paul Timola
CONCEPTS AND DEFINITIONS Prepared by Engr. John Paul Timola ENGINEERING THERMODYNAMICS Science that involves design and analysis of devices and systems for energy conversion Deals with heat and work and
More informationECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER. 20 June 2005
ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER 20 June 2005 Midterm Examination R. Culham & M. Bahrami This is a 90 minute, closed-book examination. You are permitted to use one 8.5 in. 11 in. crib
More informationIsentropic Efficiency in Engineering Thermodynamics
June 21, 2010 Isentropic Efficiency in Engineering Thermodynamics Introduction This article is a summary of selected parts of chapters 4, 5 and 6 in the textbook by Moran and Shapiro (2008. The intent
More informationT098. c Dr. Md. Zahurul Haq (BUET) First Law of Thermodynamics ME 201 (2012) 2 / 26
Conservation of Energy for a Closed System Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & Technology (BUET Dhaka-, Bangladesh zahurul@me.buet.ac.bd
More informationFind: a) Mass of the air, in kg, b) final temperature of the air, in K, and c) amount of entropy produced, in kj/k.
PROBLEM 6.25 Three m 3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 295 K, 200 kpa. The air receives 1546 kj of work from the paddle wheel. Assuming the ideal gas model,
More informationChapter 4. Energy Analysis of Closed Systems
Chapter 4 Energy Analysis of Closed Systems The first law of thermodynamics is an expression of the conservation of energy principle. Energy can cross the boundaries of a closed system in the form of heat
More informationCLASS Fourth Units (Second part)
CLASS Fourth Units (Second part) Energy analysis of closed systems Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. MOVING BOUNDARY WORK Moving boundary work (P
More informationLiquids and solids are essentially incompressible substances and the variation of their density with pressure is usually negligible.
Properties of Fluids Intensive properties are those that are independent of the mass of a system i.e. temperature, pressure and density. Extensive properties are those whose values depend on the size of
More informationChapter 7. Entropy. by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn
Chapter 7 Entropy by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Reference: Cengel, Yunus A. and Michael A. Boles, Thermodynamics: An Engineering Approach, 5th ed.,
More information5/6/ :41 PM. Chapter 6. Using Entropy. Dr. Mohammad Abuhaiba, PE
Chapter 6 Using Entropy 1 2 Chapter Objective Means are introduced for analyzing systems from the 2 nd law perspective as they undergo processes that are not necessarily cycles. Objective: introduce entropy
More informationIntroduction & Basic Concepts of Thermodynamics
Introduction & Basic Concepts of Thermodynamics Reading Problems 2-1 2-8 2-53, 2-67, 2-85, 2-96 Introduction to Thermal Sciences Thermodynamics Conservation of mass Conservation of energy Second law of
More informationEnergy, Work, and Power
Matthew W. Milligan, Work, and Power Conservation Laws an Alternative to Newton s Laws Matthew W. Milligan, Work, and Power I. - kinetic and potential - conservation II. Work - dot product - work-energy
More informationChapter 1 INTRODUCTION AND BASIC CONCEPTS
Heat and Mass Transfer: Fundamentals & Applications 5th Edition in SI Units Yunus A. Çengel, Afshin J. Ghajar McGraw-Hill, 2015 Chapter 1 INTRODUCTION AND BASIC CONCEPTS Mehmet Kanoglu University of Gaziantep
More information2-21. for gage pressure, the high and low pressures are expressed as. Noting that 1 psi = kpa,
- -58E The systolic and diastolic pressures of a healthy person are given in mmhg. These pressures are to be expressed in kpa, psi, and meter water column. Assumptions Both mercury and water are incompressible
More informationUniversity of Rome Tor Vergata
University of Rome Tor Vergata Faculty of Engineering Department of Industrial Engineering THERMODYNAMIC AND HEAT TRANSFER HEAT TRANSFER dr. G. Bovesecchi gianluigi.bovesecchi@gmail.com 06-7259-727 (7249)
More informationChapter Four fluid flow mass, energy, Bernoulli and momentum
4-1Conservation of Mass Principle Consider a control volume of arbitrary shape, as shown in Fig (4-1). Figure (4-1): the differential control volume and differential control volume (Total mass entering
More informationI. (20%) Answer the following True (T) or False (F). If false, explain why for full credit.
I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit. Both the Kelvin and Fahrenheit scales are absolute temperature scales. Specific volume, v, is an intensive property,
More informationDelft University of Technology DEPARTMENT OF AEROSPACE ENGINEERING
Delft University of Technology DEPRTMENT OF EROSPCE ENGINEERING Course: Physics I (E-04) Course year: Date: 7-0-0 Time: 4:00-7:00 Student name and itials (capital letters): Student number:. You have attended
More informationDr Ali Jawarneh. Hashemite University
Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University Examine the moving boundary work or P d work commonly encountered in reciprocating devices such as automotive engines and compressors.
More informationChapter: Heat and States
Table of Contents Chapter: Heat and States of Matter Section 1: Temperature and Thermal Energy Section 2: States of Matter Section 3: Transferring Thermal Energy Section 4: Using Thermal Energy 1 Temperature
More informationPhysical Science midterm study guide. Chapter 1 and 2
Physical Science midterm study guide Chapter 1 and 2 1. Explain the difference between a scientific law and a scientific theory a. Laws generalize observations b. Theories explain observations 2. Select
More informationTwo mark questions and answers UNIT II SECOND LAW 1. Define Clausius statement. It is impossible for a self-acting machine working in a cyclic process, to transfer heat from a body at lower temperature
More informationDishwasher. Heater. Homework Solutions ME Thermodynamics I Spring HW-1 (25 points)
HW-1 (25 points) (a) Given: 1 for writing given, find, EFD, etc., Schematic of a household piping system Find: Identify system and location on the system boundary where the system interacts with the environment
More informationENGG 3260: Thermodynamics. Home Assignment 1 (Chapter 1) (Answer)
ENGG 360: Thermodynamics Home Assignment 1 (Chapter 1) (Answer) 1. Why does a bicyclist pick up speed on a downhill road even when he is not pedaling? Does this violate the conservation of energy principle?
More informationMAHALAKSHMI ENGINEERING COLLEGE
MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI-621213. Department: Mechanical Subject Code: ME2202 U N IT - 1 Semester: III Subject Name: ENGG. THERMODYNAMICS 1. 1 kg of gas at 1.1 bar, 27 o C is compressed
More informationME 200 Final Exam December 14, :00 a.m. to 10:00 a.m.
CIRCLE YOUR LECTURE BELOW: First Name Last Name 7:30 a.m. 8:30 a.m. 10:30 a.m. 11:30 a.m. Boregowda Boregowda Braun Bae 2:30 p.m. 3:30 p.m. 4:30 p.m. Meyer Naik Hess ME 200 Final Exam December 14, 2015
More informationR13 SET - 1 '' ''' '' ' '''' Code No RT21033
SET - 1 II B. Tech I Semester Supplementary Examinations, June - 2015 THERMODYNAMICS (Com. to ME, AE, AME) Time: 3 hours Max. Marks: 70 Note: 1. Question Paper consists of two parts (Part-A and Part-B)
More informationEnergy and Energy Balances
Energy and Energy Balances help us account for the total energy required for a process to run Minimizing wasted energy is crucial in Energy, like mass, is. This is the Components of Total Energy energy
More informationThermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA
Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA Dr. Walid A. Aissa Associate Professor, Mech. Engg. Dept. Faculty of Engineering
More informationThermodynamics Introduction and Basic Concepts
Thermodynamics Introduction and Basic Concepts by Asst. Prof. Channarong Asavatesanupap Mechanical Engineering Department Faculty of Engineering Thammasat University 2 What is Thermodynamics? Thermodynamics
More informationME 2322 Thermodynamics I PRE-LECTURE Lesson 23 Complete the items below Name:
Lesson 23 1. (10 pt) Write the equation for the thermal efficiency of a Carnot heat engine below: T η = T 1 L H 2. (10 pt) Can the thermal efficiency of an actual engine ever exceed that of an equivalent
More informationTherefore, the control volume in this case can be treated as a solid body, with a net force or thrust of. bm # V
When the mass m of the control volume remains nearly constant, the first term of the Eq. 6 8 simply becomes mass times acceleration since 39 CHAPTER 6 d(mv ) CV m dv CV CV (ma ) CV Therefore, the control
More informationS6. (a) State what is meant by an ideal gas...
IB PHYSICS Name: DEVIL PHYSICS Period: Date: BADDEST CLASS ON CAMPUS TSOKOS CHAPTER 3 TEST REVIEW S1. Thermal energy is transferred through the glass windows of a house mainly by A. conduction. B. radiation.
More informationChapter 3. Basic Principles. Contents
Chapter 3. Basic Principles Contents 3.1 Introduction 3.2 Heat 3.3 Sensible Heat 3.4 Latent Heat 3.5 Evaporative Cooling 3.6 Convection 3.7 Transport 3.8 Energy Transfer Mediums 3.9 Radiation 3.10 Greenhouse
More informationTopic 3 &10 Review Thermodynamics
Name: Date: Topic 3 &10 Review Thermodynamics 1. The kelvin temperature of an object is a measure of A. the total energy of the molecules of the object. B. the total kinetic energy of the molecules of
More informationMASS, MOMENTUM, AND ENERGY EQUATIONS
MASS, MOMENTUM, AND ENERGY EQUATIONS This chapter deals with four equations commonly used in fluid mechanics: the mass, Bernoulli, Momentum and energy equations. The mass equation is an expression of the
More informationChapter 1: INTRODUCTION AND BASIC CONCEPTS. Thermodynamics = Greek words : therme(heat) + dynamis(force or power)
Chapter 1: INTRODUCTION AND BASIC CONCEPTS 1.1 Basic concepts and definitions Thermodynamics = Greek words : therme(heat) + dynamis(force or power) Note that, force x displacement = work; power = work/time
More informationA thermodynamic system is taken from an initial state X along the path XYZX as shown in the PV-diagram.
AP Physics Multiple Choice Practice Thermodynamics 1. The maximum efficiency of a heat engine that operates between temperatures of 1500 K in the firing chamber and 600 K in the exhaust chamber is most
More informationBME-A PREVIOUS YEAR QUESTIONS
BME-A PREVIOUS YEAR QUESTIONS CREDITS CHANGE ACCHA HAI TEAM UNIT-1 Introduction: Introduction to Thermodynamics, Concepts of systems, control volume, state, properties, equilibrium, quasi-static process,
More informationc Dr. Md. Zahurul Haq (BUET) Thermodynamic Processes & Efficiency ME 6101 (2017) 2 / 25 T145 = Q + W cv + i h 2 = h (V2 1 V 2 2)
Thermodynamic Processes & Isentropic Efficiency Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & Technology (BUET Dhaka-1000, Bangladesh zahurul@me.buet.ac.bd
More informationWeek 8. Steady Flow Engineering Devices. GENESYS Laboratory
Week 8. Steady Flow Engineering Devices Objectives 1. Solve energy balance problems for common steady-flow devices such as nozzles, compressors, turbines, throttling valves, mixers, heaters, and heat exchangers
More informationEngineering Thermodynamics. Chapter 6. Entropy: a measure of Disorder 6.1 Introduction
Engineering hermodynamics AAi Chapter 6 Entropy: a measure of Disorder 6. Introduction he second law of thermodynamics leads to the definition of a new property called entropy, a quantitative measure of
More informationSection 2. Energy Fundamentals
Section 2 Energy Fundamentals 1 Energy Fundamentals Open and Closed Systems First Law of Thermodynamics Second Law of Thermodynamics Examples of heat engines and efficiency Heat Transfer Conduction, Convection,
More informationS.E. (Chemical Engineering) (Second Semester)EXAMINATION, 2012 THERMODYNAMICS-I (2008 PATTERN) Time : Three Hours Maximum Marks : 100
Total No. of Questions 12] [Total No. of Printed Pages 7 Seat No. [4162]-189 S.E. (Chemical Engineering) (Second Semester)EXAMINATION, 2012 THERMODYNAMICS-I (2008 PATTERN) Time : Three Hours Maximum Marks
More informationCommon Terms, Definitions and Conversion Factors
1 Common Terms, Definitions and Conversion Factors 1. Force: A force is a push or pull upon an object resulting from the object s interaction with another object. It is defined as Where F = m a F = Force
More informationHonors Physics. Notes Nov 16, 20 Heat. Persans 1
Honors Physics Notes Nov 16, 20 Heat Persans 1 Properties of solids Persans 2 Persans 3 Vibrations of atoms in crystalline solids Assuming only nearest neighbor interactions (+Hooke's law) F = C( u! u
More informationAP PHYSICS 2 WHS-CH-14 Heat Show all your work, equations used, and box in your answers! 1 108kg
AP PHYSICS 2 WHS-CH-4 Heat Show all your work, equations used, and box in your answers! James Prescott Joule (88 889) James Prescott Joule studied the nature of heat, and discovered its relationship to
More informationME 2322 Thermodynamics I PRE-LECTURE Lesson 10 Complete the items below Name:
Lesson 10 1. (5 pt) If P > P sat (T), the phase is a subcooled liquid. 2. (5 pt) if P < P sat (T), the phase is superheated vapor. 3. (5 pt) if T > T sat (P), the phase is superheated vapor. 4. (5 pt)
More informationUnified Quiz: Thermodynamics
Fall 004 Unified Quiz: Thermodynamics November 1, 004 Calculators allowed. No books allowed. A list of equations is provided. Put your name on each page of the exam. Read all questions carefully. Do all
More informationChapter 1: 20, 23, 35, 41, 68, 71, 76, 77, 80, 85, 90, 101, 103 and 104.
Chapter 1: 0, 3, 35, 1, 68, 71, 76, 77, 80, 85, 90, 101, 103 and 10. 1-0 The filament of a 150 W incandescent lamp is 5 cm long and has a diameter of 0.5 mm. The heat flux on the surface of the filament,
More informationEntropy & the Second Law of Thermodynamics
PHYS102 Previous Exam Problems CHAPTER 20 Entropy & the Second Law of Thermodynamics Entropy gases Entropy solids & liquids Heat engines Refrigerators Second law of thermodynamics 1. The efficiency of
More informationPhysics 9 Monday, November 5, 2018
Physics 9 Monday, November 5, 2018 For today, you read Eric Mazur s chapter 22 (Electric Interactions) PDF on Canvas. For Wed., read Giancoli ch16 (electric charge & electric field) I have a large number
More informationNon-Newtonian fluids is the fluids in which shear stress is not directly proportional to deformation rate, such as toothpaste,
CHAPTER1: Basic Definitions, Zeroth, First, and Second Laws of Thermodynamics 1.1. Definitions What does thermodynamic mean? It is a Greeks word which means a motion of the heat. Water is a liquid substance
More informationATM 10. Severe and Unusual Weather. Prof. Richard Grotjahn.
ATM 10 Severe and Unusual Weather Prof. Richard Grotjahn http://atm.ucdavis.edu/~grotjahn/course/atm10/index.html Lecture topics: Units Pressure and density Temperature Ideal Gas Law Forms of energy and
More informationClassification following properties of the system in Intensive and Extensive
Unit I Classification following properties of the system in Intensive and Extensive Extensive : mass, weight, volume, potential energy, Kinetic energy, Internal energy, entropy, exergy, energy, magnetization
More informationLecture 35: Vapor power systems, Rankine cycle
ME 00 Thermodynamics I Spring 015 Lecture 35: Vapor power systems, Rankine cycle Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 0040, P. R.
More informationConservation of Energy for a Closed System. First Law of Thermodynamics. First Law of Thermodynamics for a Change in State
Conservation of Energy for a Closed System First Law of Thermodynamics Dr. Md. Zahurul Haq rofessor Department of Mechanical Engineering Bangladesh University of Engineering & Technology BUET Dhaka-000,
More informationChapter 2. Energy and the First Law of Thermodynamics
Chapter 2 Energy and the First Law of Thermodynamics Closed System Energy Balance Energy is an extensive property that includes the kinetic and gravitational potential energy of engineering mechanics.
More informationPhysics 111. Lecture 35 (Walker: ) Latent Heat Internal Energy First Law of Thermodynamics. Latent Heats. Latent Heat
Physics 111 Lecture 35 (Walker: 17.4-5) Latent Heat Internal Energy First Law of Thermodynamics Latent Heats The heat required to convert from one phase to another is called the latent heat. The latent
More informationHeat Transfer. Heat always moves from a warmer place to a cooler place. Hot objects in a cooler room will cool to room temperature.
Heat Transfer Heat always moves from a warmer place to a cooler place. Hot objects in a cooler room will cool to room temperature. Cold objects in a warmer room will heat up to room temperature. Question
More informationUNIT I Basic concepts and Work & Heat Transfer
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code: Engineering Thermodynamics (16ME307) Year & Sem: II-B. Tech & II-Sem
More informationEnergy, Work, and Simple Machines
CHAPTER 3 Energy, Work, and Simple Machines Types of Energy What do you think? Read the two statements below and decide whether you agree or disagree with them. Place an A in the Before column if you agree
More information