ME 2322 Thermodynamics I PRE-LECTURE Lesson 23 Complete the items below Name:

Size: px
Start display at page:

Download "ME 2322 Thermodynamics I PRE-LECTURE Lesson 23 Complete the items below Name:"

Transcription

1 Lesson (10 pt) Write the equation for the thermal efficiency of a Carnot heat engine below: T η = T 1 L H 2. (10 pt) Can the thermal efficiency of an actual engine ever exceed that of an equivalent Carnot engine? Yes/no 3. (10 pt) Write the equation for the COP of Carnot refrigerator below: CO P r TL = T T H L 4. (10 pt) Write the equation for the COP of a Carnot heat pump below. COP hp TH = T T H L 5. (20pt) List the completely reversible processes of a Carnot cycle below: (A) Isothermal expansion (B) Adiabatic expansion (C) Isothermal compression (D) Adiabatic compression 6. (10 pt) Write the inequality of Clausius below: δq T 0 7. (5 pt) The inequality of Clausius is consistent with the Kelvin-Planck statement of the Second Law. 8. (15 pt) Write the inequality of Clausius for an internally reversible cycle below. δq T = 0 9. The δq of an actual heat engine must be positive/zero/negative. T

2 Lesson (10 pt) What is the upper limit on the thermal efficiency of a reversible heat engine whose energy reservoirs are at 427 o C and 27 o C? 57% 2. (15 pt) The problem with many alternative energy proposals is with the quality of the energy. 3. (15 pt) Write the equation for the thermal efficiency of a reversible heat engine in terms of the reservoir temperatures below. h = 1 T L T H 4. (10pt) The coefficient of performance of an actual heat pump must be less than or equal to that of an equivalent Carnot heat pump. 5. (20 pt) You wish to use a heat pump to heat a house (T = 72 o F) using ground water (T = 50 o F) as a thermal reservoir. What is the maximum COP you can achieve? (10 pt) The actual heat pump COP of question 5 less than/greater than/equal to the number you calculated. 7. (10 pt) Irreversibilities cause the performance index of cyclic devices to be less than that of equivalent reversible devices. 8. (10 pt) It is possible to create a cyclic device which receives heat from a thermal reservoir and only produces work. True/false

3 Lesson (10) The thermal efficiency of a heat engine can never exceed 100%. 2. (15 pt) Write the relationship between heat transfers and thermodynamic temperature for a reversible heat engine below. 3. (5 pt) The International Temperature scale agrees/disagrees with the thermodynamic temperature scale. 4. (20 pt) Write the second law corollaries for heat pumps below: (A) The COP is always less than that of an equivalent reversible heat pump (B) All reversible heat pumps operating between the same two thermal reservoirs have the same COP 5. (10 pt) A reversible heat engine uses two thermal reservoirs at 500 K and 300 K. Heat is added to this engine at a rate of 100 kw. What is the rate at which this engine rejects heat? 60 kw 6. (10 pt) A reversible heat pump uses two thermal reservoirs at 500 K and 300 K. Heat is added to this engine at a rate of 100 kw. What is the rate at which this engine rejects heat? 167 kw 7. (5 pt) There is no upper limit on the COP of a heat pump? True/false 8. (5 pt) There is no upper limit on the COP of a heat engine? True/false 9. (5 pt) All heat engines that use the same thermal reservoirs have the same thermal efficiency? True/false 10. (5 pt) All heat pumps that use the same thermal reservoirs have the same thermal efficiency? True/false 11. (10 pt) Heat is added to a reversible heat engine at a rate of 1 MW from a thermal reservoir whose temperature is 900 K. If this engine rejects heat at a rate of 300 kw, what is the temperature of the thermal sink? 300 K

4 Lesson (10 pt) A thermal energy reservoir can transfer heat without changing its temperature. 2. (5 pt) A thermal energy reservoir from which heat is removed is called a source reservoir. 3. (5 pt) A thermal energy reservoir to which heat is added is called a sink reservoir. 4. (5 pt) The second law is a consequence of the fact that processes only occur in certain directions. 5. (5 pt) Is it possible to operate a heat engine without any heat rejection? No 6. (15 pt) Write the Kelvin-Planck statement of the second law below: It is impossible for any device that operates in a cycle to receive heat from a single reservoir and produce a net amount of work. 7. (15 pt) Write the Clausius statement of the second law below: It is impossible for any system to operate such a way that the sole result would be an energy transfe by heat from a cooler to a hotter body 8. (5 pt) The Kelvin-Planck statement limits the thermal efficiency to less than 100%. 9. (5 pt) A refrigerator or heat pump rejects heat to a high-temperature energy reservoir. 10. (5 pt) The desired output of a refrigerator is Q l while that of a heat pump is Q h. 11. (10 pt) Write the definition of a reversible process below. a process that can be reversed without leaving any trace in the surroundings 12. (15 pt) List 3 things that make a process irreversible below. Friction Unrestrained expansion Heat transfer over a finite temperature difference

5 Lesson (10 pt) What working fluid property remains constant throughout a throttling device? ENTHALPY 2. (10 pt) What working fluid property decreases as it passes through a throttle device? pressure 3. (10 pt) What property remains constant in a mixing device? pressure 4. (10 pt) The pressure of each stream in heat exchanger does not change? True/False 5. (10 pt) Heat exchangers can be modeled as either a multi -stream device or as two single -stream devices. 6. (5 pt) The two streams of a heat exchanger do not intermix? True/False. 7. (5 pt) The two streams of a heat exchanger must be the same fluid? True/False 8. (10 pt) The process experienced by the streams passing though a heat exchanger is a constant pressure process. 9. (10 pt) Both the energy and mass balance must be satisfied for all thermodynamic systems. 10. (10 pt) When an initially empty rigid tank is filled from a constant fluid property source, the final specific internal energy of the fluid in the tank must equal the specific enthalpy of the source. 11. (10 pt) In order to maintain the temperature constant while empting a rigid container, you must add work and/or heat.

6 Lesson (10 pt) The process experienced by the stream passing though a pipe or duct is a constant pressure process. 2. (10 pt) The first law for a multi-stream mixing chamber must be written on a per unit mass/rate basis. 3. (10 pt) The first law for a pipe or duct can be written on either a rate or per unit mass basis. 4. (20 pt) Write the general first law equation below. Q W + m(h + ke + pe) m(h + ke + pe) = (me) 2 (me) 1 in 5. (5 pt) Per unit mass (i.e., specific) quantities can be converted to rate quantities in open iout systems by multiplying them by the mass flow rate. 6. (10 pt) According to the first law, nozzles increase kinetic energy while decreasing enthalpy of a fluid. 7. (10 pt) Diffusers do not transfer heat or work. 8. (15 pt) Turbines are adiabatic machines that produce work by decreasing the enthalpy of the working fluid as it passes through the turbine. 9. (5 pt) The kinetic and potential energies of a turbine can typically be neglected. 10. (10 pt) Compressors decrease/increase the specific volume of the working fluid by applying work to it. 11. (5 pt) What working fluid property remains constant throughout a throttling device? enthalpy 12. (5 pt) What working fluid property decrease as it passes through a throttle device? pressure 13. (5 pt) What property remains constant in a mixing device? pressure 14. (5 pt) The pressure of each stream in heat exchanger does not change? True/False 15. (10 pt) Heat exchangers can be modeled as either a multi-stream device or as two single-stream devices. 16. (5 pt) The two streams of a heat exchanger do not intermix? True/False. 17. (5 pt) The two streams of a heat exchanger must be the same fluid? True/False 18. (10 pt) The process experienced by the streams passing though a heat exchanger is a constant pressure process.

7 19. (10 pt) Write the general energy balance equation below. m in m out = m 2 m (10 pt) Both the energy and mass balance must be satisfied for all thermodynamic systems. 21. (10 pt) When an initially empty rigid tank is filled from a constant fluid property source, the final specific internal energy of the fluid in the tank must equal the specific enthalpy of the source. 22. (10 pt) In order to maintain the temperature constant while empting a rigid container, you must add work and/or heat.

8 ME 2322 Thermodynamics I Lesson (15 pt) Flow work represents the work required to move fluid across an open-system boundary. 2. (5 pt) The equation for the flow work is: w flow = Pv 3. (10 pt) Enthalpy is the sum of the internal energy and flow work. 4. (15 pt) The rate at which energy is transported through an opening in a uniform-flow opensystem is given by: E = m (h + V2 2 + gz) 5. (15 pt) Energy can be transferred into (out of) a steady-flow system by heat, work, and mass. 6. (15 pt) The first law for a steady-flow system can be written in rate form as: 7. (15) The first law reduces to: Q W = m (h + ke + pe) m (h + ke + pe) out ın q w = h 2 h 1 For a steady-state, single-stream system on a per unit mass basis and negligible kinetic and potential energies. 8. (5 pt) The symbol W represents power. 9. (5 pt) the symbol Q represents rate of heat transfer.f

9 ME 2322 Thermodynamics I Lesson (5pt) Fluid properties in a steady-state system can change with location, but not with time. 2. (5 pt) Uniform (one-dimensional) flow implies that fluid properties are the same/different across any inlets or outlets for a steady-flow system. 3. (10pt) The mass balance for a uniform-flow, single-stream steady-state system can be written as A 1 V 1 /v 1 = A 2 V 2 /v 2? True/false 4. (10 pt) In a steady-state system, all changes with time are zero. 5. (15 pt)incompressible oil enters a nozzle with velocity V 1 and area A 1. It leaves through an area that is ½ the size of A 1. The oil velocity at the exit is double that at the entrance. 6. (15 pt)incompressible oil enters a nozzle with velocity V 1 and area A 1. It leaves through an area that is three times the size of A 1. The oil velocity at the exit is 1/3 that at the entrance. 7. (15 pt) A commercial salad dressing mixer mixes 2000 kg/hr of water with 800 kg/hr of canola oil. What is the rate of salad dressing production in kg/min? 46.7 kg/min 8. (15 pt) The mass balance for a steady-state system with multiple inlets and outlets is written as: m = m i 9. (10 pt) Subcooled liquid water (v = m 3 /kg) enters a system with a volume flow rate of 25 m 3 /s. What is the mass flow rate at this entrance? 25,000 kg/s o

10 ME 2322 Thermodynamics I Lesson (10pt) Volume flow rates can be converted to mass flow rates by multiplying/dividing the volume flow rate by the substances specific volume. 2. (10 pt) When using a fluid velocity to calculate flow rates, you must use the velocity component perpendicular to the flow area. 3. (10pt) When the fluid area-average specific volume and velocity are used, the mass flow rate is given by: m = AV /v 4. (15 pt) The conservation of mass equation for an open system with multiple inlets and outlets is written as: dm sys dt = m m 5. (15 pt) The general equation for the mass flow rate is: m = ρv n da A 6. (15 pt) The integral form of the conservation of mass is written as: 7. (10 pt) The term d dt V ρdv system. in out d dt ρdv = ρv nda ρv n da V i A o physically represents the rate at which mass is accumulated in the 8. (10 pt) The term i ρv n da physically represents the rate at which mass enters the system. A 9. (5 pt) When mass flows into a system and not out, the mass contained in the system must increase with time. A

ME 2322 Thermodynamics I PRE-LECTURE Lesson 23 Complete the items below Name:

ME 2322 Thermodynamics I PRE-LECTURE Lesson 23 Complete the items below Name: Lesson 23 1. (10 pt) Write the equation for the thermal efficiency of a Carnot heat engine below: 1 L H 2. (10 pt) Can the thermal efficiency of an actual engine ever exceed that of an equivalent Carnot

More information

Thermodynamics ENGR360-MEP112 LECTURE 7

Thermodynamics ENGR360-MEP112 LECTURE 7 Thermodynamics ENGR360-MEP11 LECTURE 7 Thermodynamics ENGR360/MEP11 Objectives: 1. Conservation of mass principle.. Conservation of energy principle applied to control volumes (first law of thermodynamics).

More information

Chapter 5. Mass and Energy Analysis of Control Volumes. by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn

Chapter 5. Mass and Energy Analysis of Control Volumes. by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Chapter 5 Mass and Energy Analysis of Control Volumes by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Reference: Cengel, Yunus A. and Michael A. Boles, Thermodynamics:

More information

Two mark questions and answers UNIT II SECOND LAW 1. Define Clausius statement. It is impossible for a self-acting machine working in a cyclic process, to transfer heat from a body at lower temperature

More information

Chapter 5. Mass and Energy Analysis of Control Volumes

Chapter 5. Mass and Energy Analysis of Control Volumes Chapter 5 Mass and Energy Analysis of Control Volumes Conservation Principles for Control volumes The conservation of mass and the conservation of energy principles for open systems (or control volumes)

More information

Lecture 44: Review Thermodynamics I

Lecture 44: Review Thermodynamics I ME 00 Thermodynamics I Lecture 44: Review Thermodynamics I Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 0040, P. R. China Email : liyo@sjtu.edu.cn

More information

ENT 254: Applied Thermodynamics

ENT 254: Applied Thermodynamics ENT 54: Applied Thermodynamics Mr. Azizul bin Mohamad Mechanical Engineering Program School of Mechatronic Engineering Universiti Malaysia Perlis (UniMAP) azizul@unimap.edu.my 019-4747351 04-9798679 Chapter

More information

Chapter 7. Entropy. by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn

Chapter 7. Entropy. by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Chapter 7 Entropy by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Reference: Cengel, Yunus A. and Michael A. Boles, Thermodynamics: An Engineering Approach, 5th ed.,

More information

Where F1 is the force and dl1 is the infinitesimal displacement, but F1 = p1a1

Where F1 is the force and dl1 is the infinitesimal displacement, but F1 = p1a1 In order to force the fluid to flow across the boundary of the system against a pressure p1, work is done on the boundary of the system. The amount of work done is dw = - F1.dl1, Where F1 is the force

More information

ME Thermodynamics I. Lecture Notes and Example Problems

ME Thermodynamics I. Lecture Notes and Example Problems ME 227.3 Thermodynamics I Lecture Notes and Example Problems James D. Bugg September 2018 Department of Mechanical Engineering Introduction Part I: Lecture Notes This part contains handout versions of

More information

Thermodynamics is the Science of Energy and Entropy

Thermodynamics is the Science of Energy and Entropy Definition of Thermodynamics: Thermodynamics is the Science of Energy and Entropy - Some definitions. - The zeroth law. - Properties of pure substances. - Ideal gas law. - Entropy and the second law. Some

More information

1 st Law Analysis of Control Volume (open system) Chapter 6

1 st Law Analysis of Control Volume (open system) Chapter 6 1 st Law Analysis of Control Volume (open system) Chapter 6 In chapter 5, we did 1st law analysis for a control mass (closed system). In this chapter the analysis of the 1st law will be on a control volume

More information

Week 8. Steady Flow Engineering Devices. GENESYS Laboratory

Week 8. Steady Flow Engineering Devices. GENESYS Laboratory Week 8. Steady Flow Engineering Devices Objectives 1. Solve energy balance problems for common steady-flow devices such as nozzles, compressors, turbines, throttling valves, mixers, heaters, and heat exchangers

More information

Spring_#7. Thermodynamics. Youngsuk Nam.

Spring_#7. Thermodynamics. Youngsuk Nam. Spring_#7 Thermodynamics Youngsuk Nam ysnam1@khu.ac.kr You can t connect the dots looking forward; you can only connect them looking backwards. So you have to trust that the dots will somehow connect in

More information

5/6/ :41 PM. Chapter 6. Using Entropy. Dr. Mohammad Abuhaiba, PE

5/6/ :41 PM. Chapter 6. Using Entropy. Dr. Mohammad Abuhaiba, PE Chapter 6 Using Entropy 1 2 Chapter Objective Means are introduced for analyzing systems from the 2 nd law perspective as they undergo processes that are not necessarily cycles. Objective: introduce entropy

More information

In the next lecture...

In the next lecture... 16 1 In the next lecture... Solve problems from Entropy Carnot cycle Exergy Second law efficiency 2 Problem 1 A heat engine receives reversibly 420 kj/cycle of heat from a source at 327 o C and rejects

More information

Chapter 7. Entropy: A Measure of Disorder

Chapter 7. Entropy: A Measure of Disorder Chapter 7 Entropy: A Measure of Disorder Entropy and the Clausius Inequality The second law of thermodynamics leads to the definition of a new property called entropy, a quantitative measure of microscopic

More information

first law of ThermodyNamics

first law of ThermodyNamics first law of ThermodyNamics First law of thermodynamics - Principle of conservation of energy - Energy can be neither created nor destroyed Basic statement When any closed system is taken through a cycle,

More information

CHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES

CHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES Thermodynamics: An Engineering Approach 8th Edition in SI Units Yunus A. Çengel, Michael A. Boles McGraw-Hill, 2015 CHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES Lecture slides by Dr. Fawzi Elfghi

More information

I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit.

I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit. I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit. Both the Kelvin and Fahrenheit scales are absolute temperature scales. Specific volume, v, is an intensive property,

More information

CHAPTER INTRODUCTION AND BASIC PRINCIPLES. (Tutorial). Determine if the following properties of the system are intensive or extensive properties: Property Intensive Extensive Volume Density Conductivity

More information

The First Law of Thermodynamics. By: Yidnekachew Messele

The First Law of Thermodynamics. By: Yidnekachew Messele The First Law of Thermodynamics By: Yidnekachew Messele It is the law that relates the various forms of energies for system of different types. It is simply the expression of the conservation of energy

More information

SECOND LAW OF THERMODYNAMICS

SECOND LAW OF THERMODYNAMICS SECOND LAW OF THERMODYNAMICS 2 ND Law of Thermodynamics Puts a limitation on the conversion of some forms of energy Determines the scope of an energy conversion and if an energy conversion is possible

More information

CHAPTER 7 ENTROPY. Copyright Hany A. Al-Ansary and S. I. Abdel-Khalik (2014) 1

CHAPTER 7 ENTROPY. Copyright Hany A. Al-Ansary and S. I. Abdel-Khalik (2014) 1 CHAPTER 7 ENTROPY S. I. Abdel-Khalik (2014) 1 ENTROPY The Clausius Inequality The Clausius inequality states that for for all cycles, reversible or irreversible, engines or refrigerators: For internally-reversible

More information

Introduction to Chemical Engineering Thermodynamics. Chapter 7. KFUPM Housam Binous CHE 303

Introduction to Chemical Engineering Thermodynamics. Chapter 7. KFUPM Housam Binous CHE 303 Introduction to Chemical Engineering Thermodynamics Chapter 7 1 Thermodynamics of flow is based on mass, energy and entropy balances Fluid mechanics encompasses the above balances and conservation of momentum

More information

Chapter 5: The First Law of Thermodynamics: Closed Systems

Chapter 5: The First Law of Thermodynamics: Closed Systems Chapter 5: The First Law of Thermodynamics: Closed Systems The first law of thermodynamics can be simply stated as follows: during an interaction between a system and its surroundings, the amount of energy

More information

Dishwasher. Heater. Homework Solutions ME Thermodynamics I Spring HW-1 (25 points)

Dishwasher. Heater. Homework Solutions ME Thermodynamics I Spring HW-1 (25 points) HW-1 (25 points) (a) Given: 1 for writing given, find, EFD, etc., Schematic of a household piping system Find: Identify system and location on the system boundary where the system interacts with the environment

More information

Basic thermodynamics. heat to the high temperature reservoir.

Basic thermodynamics. heat to the high temperature reservoir. Consider a heat engine that is operating in a cyclic process takes heat (QH) from a high temperature reservoir & converts completely into work (W), violating the Kelvin Planck statement. Let the work W,

More information

Thermodynamics: An Engineering Approach Seventh Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, Chapter 7 ENTROPY

Thermodynamics: An Engineering Approach Seventh Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, Chapter 7 ENTROPY Thermodynamics: An Engineering Approach Seventh Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011 Chapter 7 ENTROPY Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction

More information

Applied Thermodynamics for Marine Systems Prof. P. K. Das Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Applied Thermodynamics for Marine Systems Prof. P. K. Das Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Applied Thermodynamics for Marine Systems Prof. P. K. Das Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture No - 03 First Law of Thermodynamics (Open System) Good afternoon,

More information

Equivalence of Kelvin-Planck and Clausius statements

Equivalence of Kelvin-Planck and Clausius statements Equivalence of Kelvin-Planck and Clausius statements Violation of Clausius statement Violation of Kelvin-Planck statement Violation of Kelvin-Planck statement Violation of Clausius statement Violation

More information

ENTROPY. Chapter 7. Mehmet Kanoglu. Thermodynamics: An Engineering Approach, 6 th Edition. Yunus A. Cengel, Michael A. Boles.

ENTROPY. Chapter 7. Mehmet Kanoglu. Thermodynamics: An Engineering Approach, 6 th Edition. Yunus A. Cengel, Michael A. Boles. Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008 Chapter 7 ENTROPY Mehmet Kanoglu Copyright The McGraw-Hill Companies, Inc. Permission required

More information

BME-A PREVIOUS YEAR QUESTIONS

BME-A PREVIOUS YEAR QUESTIONS BME-A PREVIOUS YEAR QUESTIONS CREDITS CHANGE ACCHA HAI TEAM UNIT-1 Introduction: Introduction to Thermodynamics, Concepts of systems, control volume, state, properties, equilibrium, quasi-static process,

More information

Thermodynamics II. Week 9

Thermodynamics II. Week 9 hermodynamics II Week 9 Example Oxygen gas in a piston cylinder at 300K, 00 kpa with volume o. m 3 is compressed in a reversible adiabatic process to a final temperature of 700K. Find the final pressure

More information

Thermodynamics: An Engineering Approach Seventh Edition in SI Units Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011.

Thermodynamics: An Engineering Approach Seventh Edition in SI Units Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011. Thermodynamics: An Engineering Approach Seventh Edition in SI Units Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011 Chapter 7 ENTROPY Mehmet Kanoglu University of Gaziantep Copyright The McGraw-Hill

More information

CLAUSIUS INEQUALITY. PROOF: In Classroom

CLAUSIUS INEQUALITY. PROOF: In Classroom Chapter 7 ENTROPY CLAUSIUS INEQUALITY PROOF: In Classroom 2 RESULTS OF CLAUSIUS INEQUALITY For internally reversible cycles δq = 0 T int rev For irreversible cycles δq < 0 T irr A quantity whose cyclic

More information

ME Thermodynamics I

ME Thermodynamics I Homework - Week 01 HW-01 (25 points) Given: 5 Schematic of the solar cell/solar panel Find: 5 Identify the system and the heat/work interactions associated with it. Show the direction of the interactions.

More information

CHAPTER 6 THE SECOND LAW OF THERMODYNAMICS

CHAPTER 6 THE SECOND LAW OF THERMODYNAMICS CHAPTER 6 THE SECOND LAW OF THERMODYNAMICS S. I. Abdel-Khalik (2014) 1 CHAPTER 6 -- The Second Law of Thermodynamics OUTCOME: Identify Valid (possible) Processes as those that satisfy both the first and

More information

(1)5. Which of the following equations is always valid for a fixed mass system undergoing an irreversible or reversible process:

(1)5. Which of the following equations is always valid for a fixed mass system undergoing an irreversible or reversible process: Last Name First Name ME 300 Engineering Thermodynamics Exam #2 Spring 2008 March 28, 2008 Form A Note : (i) (ii) (iii) (iv) Closed book, closed notes; one 8.5 x 11 sheet allowed. 60 points total; 60 minutes;

More information

R13 SET - 1 '' ''' '' ' '''' Code No RT21033

R13 SET - 1 '' ''' '' ' '''' Code No RT21033 SET - 1 II B. Tech I Semester Supplementary Examinations, June - 2015 THERMODYNAMICS (Com. to ME, AE, AME) Time: 3 hours Max. Marks: 70 Note: 1. Question Paper consists of two parts (Part-A and Part-B)

More information

c Dr. Md. Zahurul Haq (BUET) Thermodynamic Processes & Efficiency ME 6101 (2017) 2 / 25 T145 = Q + W cv + i h 2 = h (V2 1 V 2 2)

c Dr. Md. Zahurul Haq (BUET) Thermodynamic Processes & Efficiency ME 6101 (2017) 2 / 25 T145 = Q + W cv + i h 2 = h (V2 1 V 2 2) Thermodynamic Processes & Isentropic Efficiency Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & Technology (BUET Dhaka-1000, Bangladesh zahurul@me.buet.ac.bd

More information

Classification following properties of the system in Intensive and Extensive

Classification following properties of the system in Intensive and Extensive Unit I Classification following properties of the system in Intensive and Extensive Extensive : mass, weight, volume, potential energy, Kinetic energy, Internal energy, entropy, exergy, energy, magnetization

More information

The Kelvin-Planck statement of the second law

The Kelvin-Planck statement of the second law The Kelvin-Planck statement of the second law It is impossible for any device that operates on a cycle to receive heat from a single reservoir and produce a net amount of work Q W E =ΔE net net net, mass

More information

1. INTRODUCTION TO REFRIGERATION AND AIR CONDITION

1. INTRODUCTION TO REFRIGERATION AND AIR CONDITION CHAPTER ONE 1. INTRODUCTION TO REFRIGERATION AND AIR CONDITION Refrigeration may be defined as the process of reducing and maintaining a temperature of a space or material below that of the surroundings.

More information

UBMCC11 - THERMODYNAMICS. B.E (Marine Engineering) B 16 BASIC CONCEPTS AND FIRST LAW PART- A

UBMCC11 - THERMODYNAMICS. B.E (Marine Engineering) B 16 BASIC CONCEPTS AND FIRST LAW PART- A UBMCC11 - THERMODYNAMICS B.E (Marine Engineering) B 16 UNIT I BASIC CONCEPTS AND FIRST LAW PART- A 1. What do you understand by pure substance? 2. Define thermodynamic system. 3. Name the different types

More information

King Fahd University of Petroleum & Minerals

King Fahd University of Petroleum & Minerals King Fahd University of Petroleum & Minerals Mechanical Engineering Thermodynamics ME 04 BY Dr. Haitham Bahaidarah My Office Office Hours: :00 0:00 am SMW 03:00 04:00 pm UT Location: Building Room # 5.4

More information

Exergy and the Dead State

Exergy and the Dead State EXERGY The energy content of the universe is constant, just as its mass content is. Yet at times of crisis we are bombarded with speeches and articles on how to conserve energy. As engineers, we know that

More information

The Second Law of Thermodynamics

The Second Law of Thermodynamics he Second Law of hermodynamics So far We have studied the second law by looking at its results We don t have a thermodynamic property that can describe it In this chapter we will develop a mathematical

More information

7. Development of the 2nd Law

7. Development of the 2nd Law 7-1 7. Development of the 2nd Law 7.1 1st Law Limitations The 1 st Law describes energy accounting. Once we have a process (or string of processes) we can calculate the relevant energy interactions. The

More information

Engineering Thermodynamics

Engineering Thermodynamics Engineering Thermodynamics Michael J. Moran Department of Mechanical Engineering The Ohio State University 2.1 Fundamentals...2-2 Basic Concepts and Definitions The First Law of Thermodynamics, Energy

More information

UNIT I Basic concepts and Work & Heat Transfer

UNIT I Basic concepts and Work & Heat Transfer SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code: Engineering Thermodynamics (16ME307) Year & Sem: II-B. Tech & II-Sem

More information

MAE 320 HW 7B. 1e. For an isolated system, please circle the parameter which will change with time. (a) Total energy;

MAE 320 HW 7B. 1e. For an isolated system, please circle the parameter which will change with time. (a) Total energy; MAE 320 HW 7B his comprehensive homework is due Monday, December 5 th, 206. Each problem is worth the points indicated. Copying of the solution from another is not acceptable. Multi-choice, multi-answer

More information

This follows from the Clausius inequality as a consequence of the second law of thermodynamics. Therefore. (for reversible process only) (22.

This follows from the Clausius inequality as a consequence of the second law of thermodynamics. Therefore. (for reversible process only) (22. Entropy Clausius inequality can be used to analyze the cyclic process in a quantitative manner. The second law became a law of wider applicability when Clausius introduced the property called entropy.

More information

Unit D-2: List of Subjects

Unit D-2: List of Subjects ES312 Energy Transfer Fundamentals Unit D: The Second Law of Thermodynamics ROAD MAP... D-1: From First to Second Law D-2: Second Law of Thermodynamics Unit D-2: List of Subjects Second Law of Thermodynamics

More information

2. Describe the second law in terms of adiabatic and reversible processes.

2. Describe the second law in terms of adiabatic and reversible processes. Lecture #3 1 Lecture 3 Objectives: Students will be able to: 1. Describe the first law in terms of heat and work interactions.. Describe the second law in terms of adiabatic and reversible processes. 3.

More information

Previous lecture. Today lecture

Previous lecture. Today lecture Previous lecture ds relations (derive from steady energy balance) Gibb s equations Entropy change in liquid and solid Equations of & v, & P, and P & for steady isentropic process of ideal gas Isentropic

More information

Isentropic Efficiency in Engineering Thermodynamics

Isentropic Efficiency in Engineering Thermodynamics June 21, 2010 Isentropic Efficiency in Engineering Thermodynamics Introduction This article is a summary of selected parts of chapters 4, 5 and 6 in the textbook by Moran and Shapiro (2008. The intent

More information

Lecture 35: Vapor power systems, Rankine cycle

Lecture 35: Vapor power systems, Rankine cycle ME 00 Thermodynamics I Spring 015 Lecture 35: Vapor power systems, Rankine cycle Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 0040, P. R.

More information

Engineering Thermodynamics. Chapter 5. The Second Law of Thermodynamics

Engineering Thermodynamics. Chapter 5. The Second Law of Thermodynamics 5.1 Introduction Chapter 5 The Second aw of Thermodynamics The second law of thermodynamics states that processes occur in a certain direction, not in just any direction. Physical processes in nature can

More information

Thermodynamic Systems, States, and Processes

Thermodynamic Systems, States, and Processes Thermodynamics Thermodynamic Systems, States, and Processes A thermodynamic system is described by an equation of state, such as the ideal gas law. The location of the state can be plotted on a p V diagram,

More information

Chapter Four fluid flow mass, energy, Bernoulli and momentum

Chapter Four fluid flow mass, energy, Bernoulli and momentum 4-1Conservation of Mass Principle Consider a control volume of arbitrary shape, as shown in Fig (4-1). Figure (4-1): the differential control volume and differential control volume (Total mass entering

More information

Free expansion (Joule); Constant U Forced expansion (Joule-Kelvin); Constant H. Joule-Kelvin coefficient - heating or cooling on JK expansion?

Free expansion (Joule); Constant U Forced expansion (Joule-Kelvin); Constant H. Joule-Kelvin coefficient - heating or cooling on JK expansion? ...Thermodynamics Adiabats: How c P and c V get into the exponent PV γ Free expansion (Joule); Constant U Forced expansion (Joule-Kelvin); Constant H Joule-Kelvin coefficient - heating or cooling on JK

More information

Entropy and the Second Law of Thermodynamics

Entropy and the Second Law of Thermodynamics Entropy and the Second Law of Thermodynamics Reading Problems 7-1 7-3 7-88, 7-131, 7-135 7-6 7-10 8-24, 8-44, 8-46, 8-60, 8-73, 8-99, 8-128, 8-132, 8-1 8-10, 8-13 8-135, 8-148, 8-152, 8-166, 8-168, 8-189

More information

ME6301- ENGINEERING THERMODYNAMICS UNIT I BASIC CONCEPT AND FIRST LAW PART-A

ME6301- ENGINEERING THERMODYNAMICS UNIT I BASIC CONCEPT AND FIRST LAW PART-A ME6301- ENGINEERING THERMODYNAMICS UNIT I BASIC CONCEPT AND FIRST LAW PART-A 1. What is meant by thermodynamics system? (A/M 2006) Thermodynamics system is defined as any space or matter or group of matter

More information

Today lecture. 1. Entropy change in an isolated system 2. Exergy

Today lecture. 1. Entropy change in an isolated system 2. Exergy Today lecture 1. Entropy change in an isolated system. Exergy - What is exergy? - Reversible Work & Irreversibility - Second-Law Efficiency - Exergy change of a system For a fixed mass For a flow stream

More information

Spring_#8. Thermodynamics. Youngsuk Nam

Spring_#8. Thermodynamics. Youngsuk Nam Spring_#8 Thermodynamics Youngsuk Nam ysnam1@khu.ac.krac kr Ch.7: Entropy Apply the second law of thermodynamics to processes. Define a new property called entropy to quantify the secondlaw effects. Establish

More information

T104. c Dr. Md. Zahurul Haq (BUET) Second Law of Thermodynamics ME 201 (2015) 2 / 23 T136

T104. c Dr. Md. Zahurul Haq (BUET) Second Law of Thermodynamics ME 201 (2015) 2 / 23 T136 Some Observations in Work & Heat Conversions & Second Law of Thermodynamics Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & Technology (BUET) Dhaka-1000,

More information

SOLUTION: Consider the system to be the refrigerator (shown in the following schematic), which operates over a cycle in normal operation.

SOLUTION: Consider the system to be the refrigerator (shown in the following schematic), which operates over a cycle in normal operation. Soln_21 An ordinary household refrigerator operating in steady state receives electrical work while discharging net energy by heat transfer to its surroundings (e.g., the kitchen). a. Is this a violation

More information

Lecture 21: Introducing the Second Law, Irreversibilities

Lecture 21: Introducing the Second Law, Irreversibilities ME 200 Thermodynamics I Spring 2016 Lecture 21: Introducing the Second Law, Irreversibilities Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai,

More information

ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER. 20 June 2005

ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER. 20 June 2005 ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER 20 June 2005 Midterm Examination R. Culham & M. Bahrami This is a 90 minute, closed-book examination. You are permitted to use one 8.5 in. 11 in. crib

More information

THE FIRST LAW APPLIED TO STEADY FLOW PROCESSES

THE FIRST LAW APPLIED TO STEADY FLOW PROCESSES Chapter 10 THE FIRST LAW APPLIED TO STEADY FLOW PROCESSES It is not the sun to overtake the moon, nor doth the night outstrip theday.theyfloateachinanorbit. The Holy Qur-ān In many engineering applications,

More information

Thermodynamics Lecture Series

Thermodynamics Lecture Series Thermodynamics Lecture Series Second Law uality of Energy Applied Sciences Education Research Group (ASERG) Faculty of Applied Sciences Universiti Teknologi MARA email: drjjlanita@hotmail.com http://www.uitm.edu.my/faculties/fsg/drjj.html

More information

Chapter 6. Using Entropy

Chapter 6. Using Entropy Chapter 6 Using Entropy Learning Outcomes Demonstrate understanding of key concepts related to entropy and the second law... including entropy transfer, entropy production, and the increase in entropy

More information

12 The Laws of Thermodynamics

12 The Laws of Thermodynamics June 14, 1998 12 The Laws of Thermodynamics Using Thermal Energy to do Work Understanding the laws of thermodynamics allows us to use thermal energy in a practical way. The first law of thermodynamics

More information

Chapter 7. Dr Ali Jawarneh. Department of Mechanical Engineering Hashemite University

Chapter 7. Dr Ali Jawarneh. Department of Mechanical Engineering Hashemite University Chapter 7 ENTROPY Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University Objectives Apply the second law of thermodynamics to processes. Define a new property called entropy to quantify

More information

KNOWN: Pressure, temperature, and velocity of steam entering a 1.6-cm-diameter pipe.

KNOWN: Pressure, temperature, and velocity of steam entering a 1.6-cm-diameter pipe. 4.3 Steam enters a.6-cm-diameter pipe at 80 bar and 600 o C with a velocity of 50 m/s. Determine the mass flow rate, in kg/s. KNOWN: Pressure, temperature, and velocity of steam entering a.6-cm-diameter

More information

ME 300 Thermodynamics II

ME 300 Thermodynamics II ME 300 Thermodynamics II Prof. S. H. Frankel Fall 2006 ME 300 Thermodynamics II 1 Week 1 Introduction/Motivation Review Unsteady analysis NEW! ME 300 Thermodynamics II 2 Today s Outline Introductions/motivations

More information

SECOND LAW OF THERMODYNAMICS

SECOND LAW OF THERMODYNAMICS SECOND LAW OF THERMODYNAMICS 2 ND Law of Thermodynamics Puts a limitation on the conversion of some forms of energy Determines the scope of an energy conversion and if an energy conversion is possible

More information

Applied Thermodynamics. Gas Power Cycles

Applied Thermodynamics. Gas Power Cycles Applied Thermodynamics Gas Power Cycles By: Mohd Yusof Taib Faculty of Mechanical Engineering myusof@ump.edu.my Chapter Description Aims To identify and recognized ideal thermodynamics cycle. To analyze

More information

Objectives. Conservation of mass principle: Mass Equation The Bernoulli equation Conservation of energy principle: Energy equation

Objectives. Conservation of mass principle: Mass Equation The Bernoulli equation Conservation of energy principle: Energy equation Objectives Conservation of mass principle: Mass Equation The Bernoulli equation Conservation of energy principle: Energy equation Conservation of Mass Conservation of Mass Mass, like energy, is a conserved

More information

Thermodynamic system is classified into the following three systems. (ii) Closed System It exchanges only energy (not matter) with surroundings.

Thermodynamic system is classified into the following three systems. (ii) Closed System It exchanges only energy (not matter) with surroundings. 1 P a g e The branch of physics which deals with the study of transformation of heat energy into other forms of energy and vice-versa. A thermodynamical system is said to be in thermal equilibrium when

More information

ME 2322 Thermodynamics I PRE-LECTURE Lesson 10 Complete the items below Name:

ME 2322 Thermodynamics I PRE-LECTURE Lesson 10 Complete the items below Name: Lesson 10 1. (5 pt) If P > P sat (T), the phase is a subcooled liquid. 2. (5 pt) if P < P sat (T), the phase is superheated vapor. 3. (5 pt) if T > T sat (P), the phase is superheated vapor. 4. (5 pt)

More information

Gechstudentszone.wordpress.com. Chapter 6. Vittal.K

Gechstudentszone.wordpress.com. Chapter 6. Vittal.K Chapter 6 Vittal.K Leads Up To Second Law Of Thermodynamics Heat source T 1 Q +ve w possible. It is now clear that we can t construct a heat engine with just one +ve heat interaction. The above engine

More information

Second Law of Thermodynamics

Second Law of Thermodynamics Dr. Alain Brizard College Physics II (PY 211) Second Law of Thermodynamics Textbook Reference: Chapter 20 sections 1-4. Second Law of Thermodynamics (Clausius) Heat flows naturally from a hot object to

More information

Two mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW SVCET

Two mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW SVCET Two mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW 1. What do you understand by pure substance? A pure substance is defined as one that is homogeneous and invariable in chemical composition

More information

QUESTION BANK UNIT-1 INTRODUCTION. 2. State zeroth law of thermodynamics? Write its importance in thermodynamics.

QUESTION BANK UNIT-1 INTRODUCTION. 2. State zeroth law of thermodynamics? Write its importance in thermodynamics. QUESTION BANK UNIT-1 INTRODUCTION 1. What do you mean by thermodynamic equilibrium? How does it differ from thermal equilibrium? [05 Marks, June-2015] 2. State zeroth law of thermodynamics? Write its importance

More information

Classical Approach to 2 nd Law for CM

Classical Approach to 2 nd Law for CM Classical Approach to 2 nd aw for CM Start with observations about the ability to build devices (thermodynamic cycles) Clausius Statement of 2 nd aw concerns cycles that cause heat transfer from low temperature

More information

Thermodynamics of solids 5. Unary systems. Kwangheon Park Kyung Hee University Department of Nuclear Engineering

Thermodynamics of solids 5. Unary systems. Kwangheon Park Kyung Hee University Department of Nuclear Engineering Thermodynamics of solids 5. Unary systems Kwangheon ark Kyung Hee University Department of Nuclear Engineering 5.1. Unary heterogeneous system definition Unary system: one component system. Unary heterogeneous

More information

Engineering Thermodynamics. Chapter 6. Entropy: a measure of Disorder 6.1 Introduction

Engineering Thermodynamics. Chapter 6. Entropy: a measure of Disorder 6.1 Introduction Engineering hermodynamics AAi Chapter 6 Entropy: a measure of Disorder 6. Introduction he second law of thermodynamics leads to the definition of a new property called entropy, a quantitative measure of

More information

THERMODYNAMICS, FLUID AND PLANT PROCESSES. The tutorials are drawn from other subjects so the solutions are identified by the appropriate tutorial.

THERMODYNAMICS, FLUID AND PLANT PROCESSES. The tutorials are drawn from other subjects so the solutions are identified by the appropriate tutorial. THERMODYNAMICS, FLUID AND PLANT PROCESSES The tutorials are drawn from other subjects so the solutions are identified by the appropriate tutorial. THERMODYNAMICS TUTORIAL 2 THERMODYNAMIC PRINCIPLES SAE

More information

MAHALAKSHMI ENGINEERING COLLEGE

MAHALAKSHMI ENGINEERING COLLEGE MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI 621 213. Department: Mechanical Subject Code: ME2202 Semester: III Subject Name: ENGG. THERMODYNAMICS UNIT-I Basic Concept and First Law 1. What do you understand

More information

Content. Entropy and principle of increasing entropy. Change of entropy in an ideal gas.

Content. Entropy and principle of increasing entropy. Change of entropy in an ideal gas. Entropy Content Entropy and principle of increasing entropy. Change of entropy in an ideal gas. Entropy Entropy can be viewed as a measure of molecular disorder, or molecular randomness. As a system becomes

More information

ENERGY TRANSFER BY WORK: Electrical Work: When N Coulombs of electrical charge move through a potential difference V

ENERGY TRANSFER BY WORK: Electrical Work: When N Coulombs of electrical charge move through a potential difference V Weight, W = mg Where m=mass, g=gravitational acceleration ENERGY TRANSFER BY WOR: Sign convention: Work done on a system = (+) Work done by a system = (-) Density, ρ = m V kg m 3 Where m=mass, V =Volume

More information

Lecture 29-30: Closed system entropy balance

Lecture 29-30: Closed system entropy balance ME 200 Thermodynamics I Spring 2016 Lecture 29-30: Closed system entropy balance Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 200240, P.

More information

An introduction to thermodynamics applied to Organic Rankine Cycles

An introduction to thermodynamics applied to Organic Rankine Cycles An introduction to thermodynamics applied to Organic Rankine Cycles By : Sylvain Quoilin PhD Student at the University of Liège November 2008 1 Definition of a few thermodynamic variables 1.1 Main thermodynamics

More information

Chapter Two. Basic Thermodynamics, Fluid Mechanics: Definitions of Efficiency. Laith Batarseh

Chapter Two. Basic Thermodynamics, Fluid Mechanics: Definitions of Efficiency. Laith Batarseh Chapter Two Basic Thermodynamics, Fluid Mechanics: Definitions of Efficiency Laith Batarseh The equation of continuity Most analyses in this book are limited to one-dimensional steady flows where the velocity

More information

THERMODYNAMICS Lecture 5: Second Law of Thermodynamics

THERMODYNAMICS Lecture 5: Second Law of Thermodynamics HERMODYNAMICS Lecture 5: Second Law of hermodynamics Pierwsza strona Second Law of hermodynamics In the course of discussions on the First Law of hermodynamics we concluded that all kinds of energy are

More information

FINAL EXAM. ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW:

FINAL EXAM. ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW: ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW: Div. 5 7:30 am Div. 2 10:30 am Div. 4 12:30 am Prof. Naik Prof. Braun Prof. Bae Div. 3 2:30 pm Div. 1 4:30 pm Div. 6 4:30 pm Prof. Chen Prof.

More information

Refrigeration. 05/04/2011 T.Al-Shemmeri 1

Refrigeration. 05/04/2011 T.Al-Shemmeri 1 Refrigeration is a process of controlled removal of heat from a substance to keep it at a temperature below the ambient condition, often below the freezing point of water (0 O C) 05/04/0 T.Al-Shemmeri

More information

Chapter 5: Mass, Bernoulli, and Energy Equations

Chapter 5: Mass, Bernoulli, and Energy Equations Chapter 5: Mass, Bernoulli, and Energy Equations Introduction This chapter deals with 3 equations commonly used in fluid mechanics The mass equation is an expression of the conservation of mass principle.

More information