INTRODUCTION TO ISA SYMBOLOGY
|
|
- Reynold Sanders
- 6 years ago
- Views:
Transcription
1 ERT 213/3 Process instrumentations INTRODUCTION TO ISA SYMBOLOGY DR. RAHIMAH BINTI OTHMAN (
2 COURSE OUTCOMES COs 3. Able to design process instruments in bioprocess engineering and apply techniques, skills and modern engineering tools to develop PFD and P&ID.
3 LEARNING OUTCOMES TOWARDS THE END: Identify ISA symbology used to show unit operations, valves, connections, pumps, compressors and heat exchangers.
4 LEARNING FLOW Valves In Industry Pump, Compressor, Fan & Blower Process & Instrumentation Diagram (P&ID) ISA Symbology Process Flow Diagram (PFD)
5 OUTLINES Introduction ISA symbols for: Unit operations Valves Connections Pumps Compressors Heat Exchangers
6 INTRODUCTION TO ISA Abbreviation of ISA Stands for Instrumentation, Systems & Automation Society ISA Symbology SYMBOLOGY A standard developed by ISA towards a goal of uniformity in the field of instrumentation Application of ISA Symbology PFD (Process Flow Diagram) P & ID (Piping & Instrumentation Diagram)
7 CONNECTIONS SYMBOLS Signal Lines Symbology:
8 ISA SYMBOLOGY Valve Symbology Symbol Name Gate Valve Globe Valve Ball Valve Check Valve Butterfly Valve
9 ISA SYMBOLOGY Valve Symbology Symbol Name Relief Valve Needle Valve 3-Way Valve Angle Valve Butterfly Valve
10 PUMPS SYMBOLS: ISA SYMBOLOGY
11 ISA SYMBOLOGY COMPRESSORS SYMBOLS:
12 ISA SYMBOLOGY HEAT EXCHANGER SYMBOLS:
13 ISA SYMBOLOGY Process Unit Symbols Symbol Description Heat exchanger H 2 O Water cooler S Steam heater Cooling coil
14 ISA SYMBOLOGY Process Unit Symbols Symbol Description Heater coil Centrifugal pump Turbine type compressor Pressure gauge
15 ISA SYMBOLOGY Process Unit Symbols Symbol Name Stripper Description A separator unit used commonly to liquid mixture into gas phase. Absorber A separator unit used commonly to extract mixture gas into liquid phase.
16 PROCESS FLOW DIAGRAM (PFD) Process Unit Symbols Symbol Name Distillation column Description A separator unit used commonly to crack liquid contains miscellaneous component fractions. or Liquid mixer A process unit that used to mix several components of liquid.
17 Process Unit Symbology ISA SYMBOLOGY Symbol Name Reaction chamber Description A process unit where chemical process reaction occurs Horizontal tank or cylinder A unit to store liquid or gas.
18 Process Unit Symbology ISA SYMBOLOGY Symbol Name Boiler Description A unit for heating. Centrifuge A separator unit that to physically separated liquid mixture. (exp: oil-liquid)
19 QUIZ 1 Production of Ethane from Ethanol Ethanol is fed to continuous reactor with presence of acid sulphuric catalyzer to produce ethylene. Distillation process then will be applied to separate ethylene-h 2 O mixture. Ethylene as a top product is then condensate with condenser to produce liquid ethylene. Hydrogenation of ethylene applies in another reactor with presence of Nickel catalyzer to produce ethane as a final product. Given below is the block flow diagram of the process. Re-draw the diagram by applying ISA symbology. Ethylene, CH 2 CH 2 (g) Hot water out Ethylene liq. CH 2 CH 2 (l) Ethanol, C 2 H 5 OH CH 2 CH 2 Cold water in Reactor 1 Reactor 2 H 2 SO 4 H 2 O Distillation Hydrogen, column H 2 O H 2 Ni Ethane, CH 3 CH 3
20 RECALL Reactor Condenser Distillation Column
21
22 1. Block Flow Diagram (BFD) 2. Process Flow Diagram (PFD) PROCESS DIAGRAMS 4. Piping and Instrumentation Diagram (P&ID) 3. Process equipments symbol and numbering
23 BLOCK FLOW DIAGRAM (BFD) Toluene, C 7 H 8 10,000 kg/hr Mixed Gas 2610 kg/hr Reactor C 6 H 6 Gas Separator Benzene, C 6 H 6 8,210 kg/hr Hydrogen H kg/hr CH 4 C 7 H 8 Mixed Liquid 75% Conversion of Toluene Reaction : C 7 H 8 + H 2 C 6 H 6 + CH 4 BFD Block Flow Diagram for the Production of Benzene
24 PIPING AND INSTRUMENTATION DIAGRAM (P&ID) PFD
25 PIPING AND INSTRUMENTATION DIAGRAM (P&ID) P&ID
Process Classification
Process Classification Before writing a material balance (MB) you must first identify the type of process in question. Batch no material (mass) is transferred into or out of the system over the time period
More informationName... Class... Date... Specific heat capacity and specific latent heat
Specific heat capacity and specific latent heat Specification references: P3.2.2 Temperature changes in a system and specific heat capacity P3.2.3 Changes of heat and specific latent heat Aims This is
More informationChapter 5. Mass and Energy Analysis of Control Volumes. by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn
Chapter 5 Mass and Energy Analysis of Control Volumes by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Reference: Cengel, Yunus A. and Michael A. Boles, Thermodynamics:
More informationComprehend and execute the 10 elements of effective problem
Lecture 8, 3/9/2012 Chapter 7: A GENERAL Strategy for Solving Material Balance Problems Objectives: Comprehend and execute the 10 elements of effective problem Drive a flow chart and Place labels on the
More informationTwo mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW SVCET
Two mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW 1. What do you understand by pure substance? A pure substance is defined as one that is homogeneous and invariable in chemical composition
More informationCOURSE CODE : 3072 COURSE CATEGORY : B PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE
COURSE TITLE : FLUID MECHANICS COURSE CODE : 307 COURSE CATEGORY : B PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIOD 1 Properties of Fluids 0 Fluid Friction and Flow
More informationA GENERAL Strategy for Solving Material Balance Problems. Comprehend and execute the 10 elements of effective problem
Chapter 7: A GENERAL Strategy for Solving Material Balance Problems Objectives: Comprehend and execute the 10 elements of effective problem Drive a flow chart and Place labels on the diagram. Choose a
More informationPrinciples of Food and Bioprocess Engineering (FS 231) Problems on Heat Transfer
Principles of Food and Bioprocess Engineering (FS 1) Problems on Heat Transfer 1. What is the thermal conductivity of a material 8 cm thick if the temperature at one end of the product is 0 C and the temperature
More informationWeek 8. Steady Flow Engineering Devices. GENESYS Laboratory
Week 8. Steady Flow Engineering Devices Objectives 1. Solve energy balance problems for common steady-flow devices such as nozzles, compressors, turbines, throttling valves, mixers, heaters, and heat exchangers
More informationProcesses and Process Variables
FACULTY OF PETROLEUM & RENEWABLE ENERGY ENGINEERING Course Learning Outcomes Chapter 2 Processes and Process Variables At the end of this course students will be able to Calculate the composition in term
More informationPrinciples of Chemical Engineering Processes
Principles of Chemical Engineering Processes MATERIAL AND ENERGY BALANCES SECOND EDITION NAYEF GHASEM REDHOUANE HENDA CRC Press is an imprint of the Taylor & Francis Croup, an Informa business Contents
More informationProcesses and Process Variables
FACULTY OF CHEMICAL & ENERGY ENGINEERING www.utm.my/petroleum Faculty of Petroleum & Renewable Energy Chapter 2 Processes and Process Variables Sem I (2013/14) 1 Course Learning Outcomes At the end of
More informationChemical Engineering
Chemical Engineering Basic Principles: Energy and material balances Transport Processes Momentum Transfer: Fluid Flow Energy Transfer: Heat Mass Transfer: mixing and separation processes Physical and Chemical
More informationSEM-2017(03HI MECHANICAL ENGINEERING. Paper II. Please read each of the following instructions carefully before attempting questions.
We RoU No. 700095 Candidate should write his/her Roll No. here. Total No. of Questions : 7 No. of Printed Pages : 7 SEM-2017(03HI MECHANICAL ENGINEERING Paper II Time ; 3 Hours ] [ Total Marks : 0 Instructions
More informationTHE FIRST LAW APPLIED TO STEADY FLOW PROCESSES
Chapter 10 THE FIRST LAW APPLIED TO STEADY FLOW PROCESSES It is not the sun to overtake the moon, nor doth the night outstrip theday.theyfloateachinanorbit. The Holy Qur-ān In many engineering applications,
More informationLecture 6: 3/2/2012 Material Balances
Lecture 6: 3/2/2012 Material Balances 1 Chapter 6: Introduction to Material Balance Objectives: 1. Understand the features of process, system, open, closed, steady-state, and unsteady-state systems. 2.
More informationMaterial Balances Chapter 6: Introduction to Material Balance Objectives:
Material Balances Chapter 6: Introduction to Material Balance Objectives: 1. Understand the features of process, system, open, closed, steady-state, and unsteady-state systems. 2. Express in words what
More informationChapter 5. Mass and Energy Analysis of Control Volumes
Chapter 5 Mass and Energy Analysis of Control Volumes Conservation Principles for Control volumes The conservation of mass and the conservation of energy principles for open systems (or control volumes)
More informationCHAPTER 6 THE SECOND LAW OF THERMODYNAMICS
CHAPTER 6 THE SECOND LAW OF THERMODYNAMICS S. I. Abdel-Khalik (2014) 1 CHAPTER 6 -- The Second Law of Thermodynamics OUTCOME: Identify Valid (possible) Processes as those that satisfy both the first and
More informationWINTER-15 EXAMINATION Model Answer
Subject code :(735) Page of 9 Important Instructions to examiners: ) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. ) The model answer and the
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationLecture 35: Vapor power systems, Rankine cycle
ME 00 Thermodynamics I Spring 015 Lecture 35: Vapor power systems, Rankine cycle Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 0040, P. R.
More informationRevamp of Saturated Gas Concentration Unit (SGCU)
Revamp of Saturated Gas Concentration Unit (SGCU) ADVANCING CHEMICAL ENGINEERING WORLDWIDE Contents 1. Definitions... 4 2. Introduction... 5 3. Setup... 6 4. The process in SGCU... 7 5. The problem...
More informationInvestigation of adiabatic batch reactor
Investigation of adiabatic batch reactor Introduction The theory of chemical reactors is summarized in instructions to Investigation of chemical reactors. If a reactor operates adiabatically then no heat
More informationLecture 25: Manufacture of Maleic Anhydride and DDT
Lecture 25: Manufacture of Maleic Anhydride and DDT 25.1 Introduction - In this last lecture for the petrochemicals module, we demonstrate the process technology for Maleic anhydride and DDT. - Maleic
More informationCHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES
Thermodynamics: An Engineering Approach 8th Edition in SI Units Yunus A. Çengel, Michael A. Boles McGraw-Hill, 2015 CHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES Lecture slides by Dr. Fawzi Elfghi
More informationC11.1 Organic Chemistry Quiz Questions & Answers. Parts 1 & 2; all sets Parts 3 & 4; Sets 1 & 2 only
C11.1 Organic Chemistry Quiz Questions & Answers Parts 1 & 2; all sets Parts 3 & 4; Sets 1 & 2 only C11.1 Organic Chemistry Part 1 1. Define a mixture. 2. Define crude oil. 3. Define a hydrocarbon. 4.
More informationSeparations and Reactors Design Project. Production of Allyl Chloride
Separations and Reactors Design Project Production of Allyl Chloride Process Objective Function We must now complete gathering information that will allow our firm to increase allyl chloride capacity by
More informationC 6 H H 2 C 6 H 12. n C6H12 n hydrogen n benzene. n C6H6 n H2 100 C 6 H 6 n 2 n C6H H 2. n 1
1. Cyclohexane (C 6 H 12 ) can be made by the reaction of benzene (C 6 H 6 ) and hydrogen gas. The products from the reactor are sent to a separator where the cyclohexane and some of the unreacted hydrogen
More informationUnit Workbook 2 - Level 5 ENG U64 Thermofluids 2018 UniCourse Ltd. All Rights Reserved. Sample
Pearson BTEC Level 5 Higher Nationals in Engineering (RQF) Unit 64: Thermofluids Unit Workbook 2 in a series of 4 for this unit Learning Outcome 2 Vapour Power Cycles Page 1 of 26 2.1 Power Cycles Unit
More informationENT 254: Applied Thermodynamics
ENT 54: Applied Thermodynamics Mr. Azizul bin Mohamad Mechanical Engineering Program School of Mechatronic Engineering Universiti Malaysia Perlis (UniMAP) azizul@unimap.edu.my 019-4747351 04-9798679 Chapter
More informationPAPER 2 MAY/JUNE SESSION hour
Centre Number Candidate Number Candidate Name CAMBRIDGE INTERNATIONAL EXAMINATIONS General Certificate of Education Advanced Subsidiary Level and Advanced Level CHEMISTRY 9701/2 PAPER 2 MAY/JUNE SESSION
More informationQuestions with Illustrations as of August 15, 2008
Questions with Illustrations as of August 15, 2008 ABS 210145 VER 1 Illustration: GS-0158 (Handbook of Instrumentation & Control, Kallen) The ball float shown in the illustration is 9 inches in diameter
More information4.1. Physics Module Form 4 Chapter 4 - Heat GCKL UNDERSTANDING THERMAL EQUILIBRIUM. What is thermal equilibrium?
Physics Module Form 4 Chapter 4 - Heat GCKL 2010 4.1 4 UNDERSTANDING THERMAL EQUILIBRIUM What is thermal equilibrium? 1. (, Temperature ) is a form of energy that flows from a hot body to a cold body.
More informationME332 FLUID MECHANICS LABORATORY (PART II)
ME332 FLUID MECHANICS LABORATORY (PART II) Mihir Sen Department of Aerospace and Mechanical Engineering University of Notre Dame Notre Dame, IN 46556 Version: April 2, 2002 Contents Unit 5: Momentum transfer
More informationIntroduction to Engineering thermodynamics 2 nd Edition, Sonntag and Borgnakke. Solution manual
Introduction to Engineering thermodynamics 2 nd Edition, Sonntag and Borgnakke Solution manual Chapter 6 Claus Borgnakke The picture is a false color thermal image of the space shuttle s main engine. The
More informationThe School For Excellence 2018 Unit 3 & 4 Chemistry Topic Notes Page 1
The term fractional distillation refers to a physical method used to separate various components of crude oil. Fractional distillation uses the different boiling temperatures of each component, or fraction,
More informationMECHANICAL ENGINEERING
MECHANICAL ENGINEERING Paper I Time Allowed: Three Hours Maximum Marks: 200 INSTRUCTIONS Please read each of the following instructions carefully before attempting questions. Candidates should attempt
More informationChapter 5: The First Law of Thermodynamics: Closed Systems
Chapter 5: The First Law of Thermodynamics: Closed Systems The first law of thermodynamics can be simply stated as follows: during an interaction between a system and its surroundings, the amount of energy
More informationNGL EXTRACTION SPE - BACK TO BASICS. Ed Wichert Sogapro Engineering Ltd. September 27, 2011
NGL EXTRACTION SPE - BACK TO BASICS Ed Wichert Sogapro Engineering Ltd. September 27, 2011 DEFINITIONS NGL - C 2+ LPG - C 3 and C 4 LNG - C 1 Condensate - plant inlet separator hydrocarbon liquid Pentanes-Plus
More informationReactors. Reaction Classifications
Reactors Reactions are usually the heart of the chemical processes in which relatively cheap raw materials are converted to more economically favorable products. In other cases, reactions play essential
More informationEngineering Thermodynamics. Chapter 5. The Second Law of Thermodynamics
5.1 Introduction Chapter 5 The Second aw of Thermodynamics The second law of thermodynamics states that processes occur in a certain direction, not in just any direction. Physical processes in nature can
More informationAIR COOLED CONDENSING UNIT
EVOLUTION SERIES AIR COOLED CONDENSING UNIT OUTDOOR AIR COOLED CONDENSING UNIT ORIGINAL MANUFACTURED EQUIPMENT Evolution Series BA-503-3 AUS Evolution Air Cooled Condensing Unit Series Content Page Explanation
More informationDepartment of Mechanical Engineering ME 322 Mechanical Engineering Thermodynamics. Lecture 26. Use of Regeneration in Vapor Power Cycles
Department of Mechanical Engineering ME 322 Mechanical Engineering Thermodynamics Lecture 2 Use of Regeneration in Vapor Power Cycles What is Regeneration? Goal of regeneration Reduce the fuel input requirements
More informationContinuous Flow Reactions. From idea to production size scale up in 3 steps
Continuous Flow Reactions From idea to production size scale up in 3 steps PIN NL Spring Session 13 04 2017 13 4 2017 PIN NL Spring Session 1 Topics Introduction Flowlink Continuous Flow Reactions What
More informationChemical Process Industries Ch.E-203
Chemical Process Industries Ch.E-203 Umair Aslam Assistant Professor Department of Chemical Engineering umairaslam6822@gmail.com Process Movement of data or material towards a known goal or end result,
More informationPhysics Nov Cooling by Expansion
Physics 301 19-Nov-2004 25-1 Cooling by Expansion Now we re going to change the subject and consider the techniques used to get really cold temperatures. Of course, the best way to learn about these techniques
More informationProcess Unit Control System Design
Process Unit Control System Design 1. Introduction 2. Influence of process design 3. Control degrees of freedom 4. Selection of control system variables 5. Process safety Introduction Control system requirements»
More informationVijayawada, AP. Fig Two-Step Mixing Procedure Diagram of Nano- Fluid
GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES EXPERIMENTAL ANALYSIS OF DOUBLE PIPE HEAT EXCHANGER BY USING NANO FLUIDS AL 2 O 3 & SIO 2 Sk.Subhani 1 & D.Gopi Chand 2 1&2 Assistant Professor, Department
More informationSalt (sodium chloride) is added to many types of food. Sodium chloride is produced by reacting sodium with chlorine.
Q1.This question is about salts. (a) Salt (sodium chloride) is added to many types of food. Sodium chloride is produced by reacting sodium with chlorine. sodium + chlorine sodium chloride The diagram shows
More informationFDE 211 Material & Energy Balances. Instructor: Dr. Ilgin Paker Yikici Fall 2015
FDE 211 Material & Energy Balances Instructor: Dr. Ilgin Paker Yikici Fall 2015 Agenda Process classification General mass balance equation Basic functions of Processes Process Flow Diagram Degree of Freedom
More informationBe prepared to discuss the quantitative comparison method in the oral exam.
Subject: Ring Experiment III 8 Shell and Tube Heat Exchanger Control The shell and Tube Heat Exchanger has two control valves: one on the process fluid flowing to the tubes and one on the cooling water
More informationCompression and Expansion of Fluids
CH2303 Chemical Engineering Thermodynamics I Unit V Compression and Expansion of Fluids Dr. M. Subramanian 26-Sep-2011 Associate Professor Department of Chemical Engineering Sri Sivasubramaniya Nadar College
More informationChapter: Heat and States
Table of Contents Chapter: Heat and States of Matter Section 1: Temperature and Thermal Energy Section 2: States of Matter Section 3: Transferring Thermal Energy Section 4: Using Thermal Energy 1 Temperature
More informationEngineering Thermodynamics. Chapter 1. Introductory Concepts and Definition
1.1 Introduction Chapter 1 Introductory Concepts and Definition Thermodynamics may be defined as follows : Thermodynamics is an axiomatic science which deals with the relations among heat, work and properties
More informationMAHALAKSHMI ENGINEERING COLLEGE
MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI-621213. Department: Mechanical Subject Code: ME2202 U N IT - 1 Semester: III Subject Name: ENGG. THERMODYNAMICS 1. 1 kg of gas at 1.1 bar, 27 o C is compressed
More informationFirewood? Chapter 22. Formulas and Models for Methane and Ethane. One carbon atom can form a single covalent bond with four hydrogen atoms.
Chapter 22 Gasoline, diesel fuel, and kerosene are examples of liquid fuels. A solid fuel, coal, produced the steam for the locomotives that pulled old-time trains. These fuels are mixtures of compounds
More informationSUMMER-18 EXAMINATION Model Answer
(ISO/IEC - 700-005 Certified) SUMMER-8 EXAMINATION Subject Title: Stoichiometry Subject code : 735 Page of 7 Important Instructions to examiners: ) The answers should be examined by key words and not as
More informationShortcut Distillation. Agung Ari Wibowo, S.T., M.Sc Politeknik Negeri Malang Malang - Indonesia
Shortcut Distillation Agung Ari Wibowo, S.T., M.Sc Politeknik Negeri Malang Malang - Indonesia The use of separation column in HYSYS The column utilities in HYSYS can be used to model a wide variety of
More informationFINAL EXAM. ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW:
ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW: Div. 5 7:30 am Div. 2 10:30 am Div. 4 12:30 am Prof. Naik Prof. Braun Prof. Bae Div. 3 2:30 pm Div. 1 4:30 pm Div. 6 4:30 pm Prof. Chen Prof.
More informationCHAPTER 3 SHELL AND TUBE HEAT EXCHANGER
20 CHAPTER 3 SHELL AND TUBE HEAT EXCHANGER 3.1 INTRODUCTION A Shell and Tube Heat Exchanger is usually used for higher pressure applications, which consists of a series of tubes, through which one of the
More information1 st Law Analysis of Control Volume (open system) Chapter 6
1 st Law Analysis of Control Volume (open system) Chapter 6 In chapter 5, we did 1st law analysis for a control mass (closed system). In this chapter the analysis of the 1st law will be on a control volume
More informationME 417 Design of Alternative Energy Systems. Sample Equation Sheet: Quiz 2
Basic hermal Engineering Steady state energy balance ME 47 Design of Alternative Energy Systems Sample Equation Sheet: Quiz Work Devices: W in m (h h (v v / g(z z eat Devices: Q in m (h h (v v / g(z z
More informationA comparative study on the recovery of 1,2-dichloroethane and the removal of benzene contained in the byproducts of VCM process
Korean J. Chem. Eng., 27(3), 970-976 (2010) DOI: 10.1007/s11814-010-0206-7 RAPID COMMUNICATION A comparative study on the recovery of 1,2-dichloroethane and the removal of benzene contained in the byproducts
More informationGUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. COURSE CURRICULUM COURSE TITLE: PROCESS HEAT TRANSFER (Course Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: PROCESS HEAT TRANSFER (Course Code: 330501) Diploma Programme in which this course is offered Chemical Engineering Semester
More informationfirst law of ThermodyNamics
first law of ThermodyNamics First law of thermodynamics - Principle of conservation of energy - Energy can be neither created nor destroyed Basic statement When any closed system is taken through a cycle,
More informationME 354 THERMODYNAMICS 2 MIDTERM EXAMINATION. Instructor: R. Culham. Name: Student ID Number: Instructions
ME 354 THERMODYNAMICS 2 MIDTERM EXAMINATION February 14, 2011 5:30 pm - 7:30 pm Instructor: R. Culham Name: Student ID Number: Instructions 1. This is a 2 hour, closed-book examination. 2. Answer all questions
More informationME Thermodynamics I. Lecture Notes and Example Problems
ME 227.3 Thermodynamics I Lecture Notes and Example Problems James D. Bugg September 2018 Department of Mechanical Engineering Introduction Part I: Lecture Notes This part contains handout versions of
More informationENGR Thermodynamics
ENGR 224 - hermodynamics #1 - Diagram for a Cascade VCR Cycle (21 ts) Baratuci Final 13-Jun-11 On a full sheet of paper, construct a complete Diagram for the cascade cascade vapor-compression refrigeration
More informationDevelopment of Safe and Scalable Continuous-Flow Methods for. Palladium-Catalyzed Aerobic Oxidation Reactions
Supplementary Data for Development of Safe and Scalable Continuous-Flow Methods for Palladium-Catalyzed Aerobic Oxidation Reactions Xuan Ye, a Martin D. Johnson, *b Tianning Diao, a Matthew H. Yates *b
More informationThermochemistry: Heat and Chemical Change
Thermochemistry: Heat and Chemical Change 1 Heat or Thermal Energy (q) Heat is a form of energy Is heat the same as temperature? Heat flows between two objects at different temperatures. Hot Cold 2 Chemical
More informationHigh-Pressure Volumetric Analyzer
High-Pressure Volumetric Analyzer High-Pressure Volumetric Analysis HPVA II Benefits Dual free-space measurement for accurate isotherm data Free space can be measured or entered Correction for non-ideality
More informationQUESTION 1 The boiling temperature of hydrocarbons making up crude oil depends on the strength of intermolecular forces known as:
QUESTION 1 The boiling temperature of hydrocarbons making up crude oil depends on the strength of intermolecular forces known as: B C D Hydrogen bonding. Dipole-dipole interactions. Dispersion forces.
More informationOrganic Chemistry. Alkanes are hydrocarbons in which the carbon atoms are joined by single covalent bonds.
Organic Chemistry Organic compounds: The branch of chemistry which deals with the study of carbon compounds is called organic chemistry. Catenation: The carbon atom has a property to undergo self linking
More informationECH 4224L Unit Operations Lab I Thin Film Evaporator. Introduction. Objective
Introduction In this experiment, you will use thin-film evaporator (TFE) to separate a mixture of water and ethylene glycol (EG). In a TFE a mixture of two fluids runs down a heated inner wall of a cylindrical
More informationEnhanced Plant Design for the Production of Azeotropic Nitric Acid
Enhanced Plant Design for the Production of Azeotropic Nitric Acid by Rainer Maurer, Uwe Bartsch Krupp Uhde GmbH, Dortmund, Germany Prepared for Presentation at The Nitrogen 2000 Vienna, Austria 12 to
More informationturbine (a) (i) Which part of the power station provides thermal (heat) energy from a chain reaction?
Nuclear fission and radiation 1 The diagram shows parts of a nuclear power station. control rods boiler steam generator electricity out turbine condenser nuclear reactor (a) (i) Which part of the power
More informationThe First Law of Thermodynamics. By: Yidnekachew Messele
The First Law of Thermodynamics By: Yidnekachew Messele It is the law that relates the various forms of energies for system of different types. It is simply the expression of the conservation of energy
More informationThis Capstone Project will address the analysis and diagnosis of the Steam Turbo-Generator (STG) machine vibration problems in Thermal Power Plant
This Capstone Project will address the analysis and diagnosis of the Steam Turbo-Generator (STG) machine vibration problems in Thermal Power Plant (TPP) Kosova-B that are degrading the normal operations
More informationAn Introduction to Pharmaceutical & Chemical Process Technology. Paul Ashall
An Introduction to Pharmaceutical & Chemical Process Technology Paul Ashall Aspects of Industrial Chemical Processes Products Types of process Flowsheets Mass balances Energy balances Heat transfer and
More informationTopic 19b. Thermal Properties of Matter
Topic 19b The infra-red image of a head shows the distribution of heat. Different colours indicate different temperatures. Which do you think are the warmest regions? Thermal Properties of Matter contents
More information0 o C. H vap. H evap
Solution. Energy P (00 ) Pν x 0 5 ρ 850,4 J kg - J kg Power kg s 000,4 600 70 W Solution. 00 o C H evap H vap 0 o C H liq 00 t H liq (4. x0 t ) dt 4.t x0 0 40 0 40 kj kg - H evap 40,68 J mol - (From Appendix
More informationBME-A PREVIOUS YEAR QUESTIONS
BME-A PREVIOUS YEAR QUESTIONS CREDITS CHANGE ACCHA HAI TEAM UNIT-1 Introduction: Introduction to Thermodynamics, Concepts of systems, control volume, state, properties, equilibrium, quasi-static process,
More informationName: 10/21/2014. NE 161 Midterm. Multiple choice 1 to 10 are 2 pts each; then long problems 1 through 4 are 20 points each.
NE 161 Midterm Multiple choice 1 to 10 are 2 pts each; then long problems 1 through 4 are 20 points each. 1. Which would have a higher mass flow rate out of a 1 ft 2 break, a. 200 psia subcooled water
More informationAll rights reserved. Armando B. Corripio, PhD, PE Flash Distillation Flash Drum Variables and Specifications... 2
Flash Distillation All rights reserved. Armando B. Corripio, PhD, PE. 2013 Contents Flash Distillation... 1 1 Flash Drum Variables and Specifications... 2 2 Flash Drum Balances and Equations... 4 2.1 Equilibrium
More information4.1. Physics Module Form 4 Chapter 4 - Heat GCKL UNDERSTANDING THERMAL EQUILIBRIUM. What is thermal equilibrium?
4.1 4 UNDERSTANDING THERMAL EQUILIBRIUM What is thermal equilibrium? 1. ( Heat, Temperature ) is a form of energy that flows from a hot body to a cold body. 2. The SI unit for ( heat, temperature) is Joule,
More informationME 2322 Thermodynamics I PRE-LECTURE Lesson 23 Complete the items below Name:
Lesson 23 1. (10 pt) Write the equation for the thermal efficiency of a Carnot heat engine below: T η = T 1 L H 2. (10 pt) Can the thermal efficiency of an actual engine ever exceed that of an equivalent
More informationIMPROVING THE PERFORMANCE OF AN AC UNIT USING CFD
3 rd HVAC Contracting Conference Evolution of HVAC Industry International Hotel Doha The City November 25-26, 2018 IMPROVING THE PERFORMANCE OF AN AC UNIT USING CFD F. Moualled Mechanical Engineering Department
More informationFigure 1 Enlargement of Powdered Activated Carbon by microscope.
Introduction The following is a description of how the Powdered Activated Carbon (PAC) dosing system operates. Firstly an overview of how the Semi Dry Reactor and the purpose of carbon injection is described.
More informationQ. 1 Q. 5 carry one mark each.
General Aptitude - GA Set-2 Q. 1 Q. 5 carry one mark each. Q.1 The volume of a sphere of diameter 1 unit is than the volume of a cube of side 1 unit. (A) least (B) less (C) lesser (D) low Q.2 The unruly
More informationFigure 4-1: Pretreatment schematic
GAS TREATMENT The pretreatment process consists of four main stages. First, CO 2 and H 2 S removal stage which is constructed to assure that CO 2 would not exceed 50 ppm in the natural gas feed. If the
More informationHeat and Mass Transfer Prof. S.P. Sukhatme Department of Mechanical Engineering Indian Institute of Technology, Bombay
Heat and Mass Transfer Prof. S.P. Sukhatme Department of Mechanical Engineering Indian Institute of Technology, Bombay Lecture No. 18 Forced Convection-1 Welcome. We now begin our study of forced convection
More informationSparks CH301. WHY IS EVERYTHING SO DIFFERENT? Gas, Liquid or Solid? UNIT 3 Day 7
Sparks CH301 WHY IS EVERYTHING SO DIFFERENT? Gas, Liquid or Solid? UNIT 3 Day 7 What are we going to do today? Discuss types of intermolecular forces. Compare intermolecular forces for different molecules.
More informationESO 201A Thermodynamics
ESO 201A Thermodynamics Instructor: Sameer Khandekar Tutorial 9 [7-27] A completely reversible heat pump produces heat at arate of 300 kw to warm a house maintained at 24 C. Theexterior air, which is at
More information20 m neon m propane. g 20. Problems with solutions:
Problems with solutions:. A -m tank is filled with a gas at room temperature 0 C and pressure 00 Kpa. How much mass is there if the gas is a) Air b) Neon, or c) Propane? Given: T7K; P00KPa; M air 9; M
More informationINTRODUCTION: Shell and tube heat exchangers are one of the most common equipment found in all plants. How it works?
HEAT EXCHANGERS 1 INTRODUCTION: Shell and tube heat exchangers are one of the most common equipment found in all plants How it works? 2 WHAT ARE THEY USED FOR? Classification according to service. Heat
More informationT H E R M O D Y N A M I C S M E
T H E R M O D Y N A M I C S M E THERMODYNAMICS CONTENTS 1 BASIC CONCEPTS IN THERMODYNAMICS 2 TEMPERATURE 3 WORK AND HEAT TRANSFER Thermodynamic system, surroundings, universe, system boundary Types of
More informationQuiz I: Thermodynamics
Quiz I: Thermodynamics SCH4U_2018-2019_V2 NAME: (Total Score: / 30) Multiple Choice (12) 1. What can be deduced from the following reaction profile? A. The reactants are less stable than the products and
More informationSOUTHEAST TEXAS CONTINUING EDUCATION HIGH TEMPERATURE WATER HEATING SYSTEMS
EXAM No. 151 HIGH TEMPERATURE WATER HEATING SYSTEMS 1. Due to pressure limitations on pipe and fittings, equipment, and accessories, what is the practical temperature limit of circulating water in district
More informationThermodynamics Introduction and Basic Concepts
Thermodynamics Introduction and Basic Concepts by Asst. Prof. Channarong Asavatesanupap Mechanical Engineering Department Faculty of Engineering Thammasat University 2 What is Thermodynamics? Thermodynamics
More information