Common Mode Filters. For power line. ACM series. Type: Issue date: June * Dimensions Code [EIA]
|
|
|
- Neal Bryant
- 5 years ago
- Views:
Transcription
1 Common Mode Filters For power line ACM series Type: ACM50 ACM7060 ACM9070 ACM ACM5 [808 inch]* [8 inch] [68 inch] [8 inch] [605 inch] * Dimensions Code [EIA] Issue date: June 0 Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
2 (/7) Common Mode Filters For Power Line Conformity to RoHS Directive ACM Series ACM50 FEATURES Several large current products are prepared to correspond to the various applications. Low profile and compact shape, it is suited for surface mounting. It shows high common mode impedance despite of its compact shape. APPLICATIONS Radiation noise suppression for power line (DVC, DVD cam, DSC, etc.) TEMPERATURE RANGES Operating Storage(After mount) 0 to +5 C 0 to +5 C PACKAGING STYLE AND QUANTITIES Packaging style Reel Quantity ø80mm 800 pieces/reel Taping ø0mm 500 pieces/reel PRODUCT IDENTIFICATION ACM P - T - () () () () (5) (6) () Series name () Dimensions W T 50:.5.0mm () Impedance [at 00MHz] 90: 900 () Numbers of lines P: -line (5) Packaging style T: ø80mm reel taping TL: ø0mm reel taping (6) TDK internal code RECOMMENDED SOLDERING CONDITIONS RECOMMENDED TEMPERATURE PROFILE FOR LEAD-FREE SOLDER 0 C Peak 5 C max. Natural cooling 80 C 50 C 60 to 0s 0 to 0s Time(s) REFLOW PROFILE FOR SOLDER HEAT RESISTANCE 0 C Peak 60 C max. Natural cooling 80 C 50 C 60 to 0s 0s max. Time(s) Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications / 006 / e97_acm
3 (/7) SHAPES AND DIMENSIONS CIRCUIT DIAGRAM.7± ±0..0 No polarity RECOMMENDED PC BOARD PATTERN Ferrite.0max. Wire Terminal ELECTRICAL CHARACTERISTICS Part No. impedance ( )[at 00MHz] DC resistance ( )max. [ line] Rated current Idc (A)max. Rated voltage Edc (V)max. min. typ. 60 C 85 C 5 C ACM50--P ACM50--P ACM50-90-P ACM50--P Insulation resistance (M )min. RATED CURRENT vs. TEMPERATURE CHARACTERISTICS (DERATING) ACM50--P ACM50--P Rated current(a) Temperature( C) Rated current(a) Temperature( C) ACM50-90-P ACM50--P Rated current(a) Temperature( C) Rated current(a) Temperature( C) 00-0 / 006 / e97_acm
4 (/7) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS ACM50--P 0000 ACM50--P ACM50-90-P 0000 ACM50--P / 006 / e97_acm
5 (/7) Common Mode Filters For Power Line Conformity to RoHS Directive ACM Series ACM7060, 9070,, 5 FEATURES A chip-type common mode filter for large current applications. impedance surpasses 00 to 000 at 00MHz. Noise is greatly suppressed. Capable of handling the highest current (up to 0A) of any chiptype common mode filter. Height and size have been considered, resulting in a compact and light-weight choke coil. Applicable for the miniaturization required to reduce the size and weight of portable equipment. The products contain no lead and also support lead-free soldering. This product does not contain regulated substances that are slated to be included in RoHS. APPLICATIONS Used for power line noise suppression for any electronic devices Used to counter adapter/battery line noise for relatively large electronic devices such as notebook PCs, stand-alone word processors, etc PRODUCT IDENTIFICATION ACM PL - TL () () () () (5) (6) () Series () Dimensions L W 7060: mm () Impedance[at 00MHz] 70: 700 () Number of lines PL: -line (5) Packaging style T: ø80mm reel taping TL: ø0mm reel taping (6) TDK internal code RECOMMENDED SOLDERING CONDITIONS RECOMMENDED TEMPERATURE PROFILE FOR LEAD-FREE SOLDER TEMPERATURE RANGES Operating 0 to +85 C Storage(After mount) 0 to +85 C 0 C Peak 5 C max. Natural cooling PACKAGING STYLE AND QUANTITIES Packaging style Type Reel Quantity ACM7060 ø0mm 500 pieces/reel Taping ACM9070 ø0mm 800 pieces/reel ACM ø0mm 500 pieces/reel ACM5 ø0mm 500 pieces/reel 80 C 50 C 60 to 0s 0 to 0s Time(s) REFLOW PROFILE FOR SOLDER HEAT RESISTANCE 0 C Peak 60 C max. Natural cooling 80 C 50 C 60 to 0s 0s max. Time(s) Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications / 006 / e97_acm
6 (5/7) SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BOARD PATTERN(REFLOW SOLDERING) ACM7060 TYPE ACM PL-TL0 ACM PL-TL0 6.0±0. 7.0±0..5max. 6.0±0. 7.0±0..5max ±0..5±0..0typ..5±0..5±0..5±0..5±0..5±0..0typ..5±0..5±0..5±0. Weight: 0.5g ACM9070 TYPE ACM PL-TL0 7.0±0. 9.0±0..5max ±0..5±0. 6.0typ..5±0..5±0..0±0. Weight: 0.8g 00-0 / 006 / e97_acm
7 (6/7) SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BOARD PATTERN(REFLOW SOLDERING) ACM TYPE ACM-70-PL-TL0 ACM-0-PL-TL0.0±0. 6.0max..0±0. 6.0max..0±0..0± ±0..7±0..5±0..7±0..7±0..5±0..±0. 7.typ..±0..±0. 7.typ..±0. Weight:.0g ACM5 TYPE 5.0±0.5.0± ±0..7±0. 6.0max..±0. 0.typ..7±0..±0. Weight:.5g 00-0 / 006 / e97_acm
8 (7/7) ELECTRICAL CHARACTERISTICS Part No. Impedance DC resistance Rated current Insulation resistance Rated voltage ( )[at 00MHz] (m )max. Idc(A)max. (M )min. Edc(V)max. min. typ. ACM PL-TL ACM PL-TL ACM PL-TL ACM-70-PL-TL ACM-0-PL-TL ACM5-55-PL-TLHF TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS ACM PL-TL0 ACM PL-TL0 ACM PL-TL ACM-70-PL-TL0 ACM-0-PL-TL0 ACM5-55-PL-TLHF MEASURING CIRCUITS HP9A HP9A 00-0 / 006 / e97_acm
Common Mode Filters. For automobile signal line. ACT series. Type: [1812 inch]* (CAN-BUS) [1812 inch] (FlexRay) Issue date: July 2012
![Common Mode Filters. For automobile signal line. ACT series. Type: [1812 inch]* (CAN-BUS) [1812 inch] (FlexRay) Issue date: July 2012](/thumbs/86/94868550.jpg "Common Mode Filters. For automobile signal line. ACT series. Type: [1812 inch]* (CAN-BUS) [1812 inch] (FlexRay) Issue date: July 2012")
Common Mode Filters For automobile signal line ACT series Type: ACT5B ACT5R [8 inch]* (CAN-BUS) [8 inch] (FlexRay) * Dimensions Code [EIA] Issue date: July 0 Conformity to RoHS Directive: This means that,
CER Series Controlled ESR Capacitors
CER Series Controlled ESR Capacitors Type: CERB (C1608) CERD (C2012) Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before using this product SAFETY REMINDERS REMINDERS 1. If you intend
CHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
CKD Series Low ESL Feed Through Type
CKD Series Low ESL Feed Through Type Type: CKD110JB CKD310JB CKD510JB CKD610JB CKD61BJB Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read efore using this product SAFETY REMINDERS REMINDERS
6-PIN DIP, 400V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET
DESCRIPTION Solid State Relay OCMOS FET PS7141-1A,PS7141L-1A 6-PIN DIP, 4V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET The PS7141-1A and PS7141L-1A are solid state relays containing GaAs LEDs on the
Chip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
PS7113-1A,-2A,PS7113L-1A,-2A
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 3 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7113-1A, -2A and PS7113L-1A, -2A are solid state
SPECIFICATION OF BS LQCMU SERIES
SPECIFICATION OF BS LQCMU SERIES FEATURES 1. This miniature chip inductors wound on a special ferrite core. 2. Low DC resistance, high current capacity, and high saturation for surface mounting. 3. They
CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7341C-1A,PS7341CL-1A CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing
FrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance
Approval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
Approval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
SignalSure 150. Mid power solution AUTOMOTIVE. SignalSure 150 is a compact, surface-mount, mid power LED signaling
AUTOMOTIVE SignalSure 150 Mid power solution SignalSure 150 is a compact, surface-mount, mid power LED signaling solution that delivers an elevated standard of light output, flux density, and color uniformity.
1/10 FEATURES HOW TO ORDER DIMENSIONS
OUTLINE Wire wound chip inductor is a perfect combine by means of combining high precision coil framework with superb wound technology.comparable with traditional inductor, it is improved technology, reduced
Configurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
Approval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
Approval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
DATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series
Product specification November 05, 201 V.0 DATA SHEET AC/DC POWER SUPPLY series RoHS compliant & Halogen free 2 Positive Temperature Coefficient (PTC) Data Sheet Description The 0603 series provides miniature
Multi-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ODEING CODE BP 3 T T S PODUCT CODE BF : For General Signal Lines BP : For Power Lines BH : For High Speed Signal Lines (1MHz~) BS : For Higher Speed Signal Lines (MHz~) DIMENSION
LMBZ52xxBLG Series. 225 mw SOT 23 Surface Mount LESHAN RADIO COMPANY, LTD. 1/6
5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage regulation with minimum space requirement.
Green Thick Film Chip Resistors
Green Thick Film Chip Resistors FEATURES Green resistor - does not use RoHS exemptions Stability R/R = 1 % for 1000 h at 70 C 2 mm pitch packaging option for 0603 size Material categorization: for definitions
WLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
DC/DC converter Input 9-36 and Vdc Output up to 0.5A/3W
PKV 3000 I PKV 5000 I DC/DC converter Input 9-36 and 18-72 Vdc up to 0.5A/3W Key Features Industry standard DIL24 Wide input voltage range, 9 36V, 18 72V High efficiency 74 83% typical Low idling power
MAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
MAU Series W, Miniature SIP, Single & DC/DC s Key Features Efficiency up to 0 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0 to UL 9V-0 Package
Table of Contents. DS163 LUXEON V Product Datasheet Lumileds Holding B.V. All rights reserved.
Illumination LUXEON V Unmatched flux density with the lowest thermal resistance enabling never before possible form factors LUXEON V is a Chip Scale Package (CSP based high power emitter designed to deliver
MAU200 Series. 1W, High Isolation SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
Component Distributors, Inc. ~ www.cdiweb.com ~ sales@cdiweb.com ~ -0--33 W, High Isolation SIP, Single & DC/DC s Key Features Efficiency up to 00 Isolation MTBF >,000,000 Hours Low Cost Input, and Output
3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails
WIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
CHIP FERRITE BEADS. Features. Applications. Ordering Information. Shape and Dimensions
CHIP FERRITE BEADS Features 1. Effective for suppressing noise at high frequency, from several MHz to several hundreds MHz. 2. Chip type is suited for preventing the abnormal oscillation in high frequency
Shielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
High Voltage MLC Chips
NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet
Shielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
MF-NSMF Series - PTC Resettable Fuses
*RoHS and EC-Q00 COMPLINT Features n Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications n Compact design to save board space - 06 footprint n Small size
SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
DC/DC converter Input 9-36 and Vdc Output up to 0.5A/3W
PKV 3000 I PKV 5000 I DC/DC converter Input 9-36 and 18-72 Vdc up to 0.5A/3W Key Features Industry standard DIL24 Wide input voltage range, 9 36V, 18 72V High efficiency 74 83% typical Low idling power
SPEC NO: DSAJ6327 REV NO: V.1 DATE: JUL/31/2009 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED:
XPower PRELIMINARY SPEC KA-8070-2 SERIES Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES High efficient lightsource. Designed for high current operation. Low
THICK FILM CHIP NETWORK RESISTOR THICK FILM CHIP NETWORK RESISTOR FEATURES TYPE DESIGNATION R C M L 0 8 W J T L
THICK FILM CHIP NETORK RESISTOR THICK FILM CHIP NETORK RESISTOR FEATURES Miniature and light weight. Suit for reflow solder. Stable electrical capability, high reliability. Low assembly cost, suit for
MF-NSMF Series - PTC Resettable Fuses
*RoHS COMPLINT & EC PPROVED Features Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications Compact design to save board space - 06 footprint Small size results
AVX is a leading worldwide manufacturer and supplier of a broad line of passive electronic components and Interconnects.
Tantalum Capacitors Niobium Oxide Capacitors AVX is a leading worldwide manufacturer and supplier of a broad line of passive electronic components and Interconnects. AVX enjoys significant competitive
LUXEON UV U1. Highest power density, superior efficiency, powered by leading Chip Scale Package (CSP) technology ILLUMINATION
ILLUMINATION LUXEON UV U1 Highest power density, superior efficiency, powered by leading Chip Scale Package (CSP) technology At 1/5 th the size of other ultraviolet and violet LEDs, LUXEON UV U1 LEDs,
1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
WIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
WIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
SPEC NO: DSAJ6328 REV NO: V.1 DATE: JUL/31/2009 PAGE: 1 OF 9 APPROVED: WYNEC CHECKED:
XPower PRELIMINARY SPEC KADS-8070-2 SERIES Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Super high flux output and high luminance. Designed for high current
Type FCA Acrylic Surface Mount Film Capacitors
Type Acrylic Surface Mount Film Capacitors Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation Type acrylic film chips are non-inductive stacked metallized film capacitors which
CR-PF Series Ultra-Low Lead Content Thick Film Resistor
RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**
MAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Key Features
W, Miniature SIP, Single & Dual Output DC/DC s Key Features Efficiency up to % 000 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0] to +] UL
Multilayer Ferrite Chip Beads
Multilayer Ferrite Chip Beads Features Monolithic structure for closed magnetic path and high reliability Standard EIA/EIAJ chip sizes such as 0402/5, 0603/608, 0805/202, and 206/326 A complete set of
50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
Double-Sided Chip Resistors
Double-Sided Two parallel resistance elements in a single chip Excellent pulse withstand performance Laser trimmed up to 0.5% tolerance Enhanced working voltage Enhanced power rating Pb-free terminations
PREJECTION INDUSTRIAL CORP. 百泉工業股份有限公司
: 1 OF 11 1. Features High performance (Isat) realized by metal dust core. Performance low resistance,high current rating. Low loss realized with low DCR. Frequency range : up to (1.0 MHz). 100% lead (pb)
MGB SERIES (Chip Ferrite Bead for GHz Range) Engineering Specification
MG SERIES (Chip Ferrite ead for GHz Range) Engineering Specification RoHS Features and Application.Effectively filtering capability over a wide range of frequency (Several MHz to GHz).Monolithic inorganic
DATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
INPAQ Global RF/Component Solutions
MHC 1005-4532 S Series Specification Product Name Series High Current Chip Bead MHC S Series Size EIAJ 1005-4532 Chip Ferrite Bead for High Current (MHC S Series) Engineering Spec. INPAQ FEATURES Combination
Chip Attenuator. Chip Attenuator
Chip Attenuator 00 Type: EXBAT (Unbalanced p type) Type: EXBAB (Balanced O type) n Features EXBAT type : Unbalanced p type l Unbalanced p type attenuator circuit in one chip(1.0 mm 1.0 mm) l Mounting occupation
INPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
Data Sheet. HLMP-4700 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790
HLMP-4700 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 Description These tinted diffused LED lamps are designed and optimized
List... Package outline... Features Mechanical data... Maximum ratings... Rating and characteristic curves... Pinning information...
List List... Package outline... 1 Features... Mechanical data... Maximum ratings... Rating and characteristic curves... 3 Pinning information... 4 Marking... 4 Tube packing... 4 Suggested thermal profiles
WK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
PH5504A2NA1. Ambient Light Sensor DESCRIPTION FEATURES APPLICATIONS. R08DS0067EJ0100 Rev.1.00 Nov 05, 2012 DISCONTINUED
Ambient Light Sensor DESCRIPTION Data Sheet The is an ambient light sensor with a photo diode and current amplifier. This product has spectral characteristics close to human eye sensitivity and outputs
High Voltage MLC Chips
HOW TO ORDER NEW 630V RANGE 1808 A A 271 K AVX Voltage Temperature Capacitance Code Capacitance Style 600V/630V = C Coefficient (2 significant digits Tolerance 0805 1000V = A NPO (C0G) = A + no. of zeros)
Electrolytic Capacitor Product Specification. Scope P.1 Performance P.1 Marking P.4 Catalog Numbering P.4 Dimensions and Appearance P.
CA SERIES Page No Contents Scope P.1 Performance P.1 Marking P.4 Catalog Numbering P.4 Dimensions and Appearance P.5 Parts Lists P.6~8 CA SERIES 1 I.Scope This standard defines characteristics and dimensions
GREEN PROCUREMENT GUIDELINES
GREEN PROCUREMENT GUIDELINES Ver.1.0 September 15, 2006 Ver.1.1 November 5, 2008 Ver.1.2 May 21, 2009 Ver.1.3 August 5, 2009 Ver.1.4 June 6, 2013 Ver.1.4.1 April 25, 2017 Contents 1. Introduction 2. Purpose
GM5BW96320A. Light Emitting Diode GM5BW96320A. Features. Agency Approvals/Compliance. Applications. 1. RoHS compliant
GM5BW96320A Light Emitting Diode Features 1. High brightness (1,400 mcd @ I F =20mA) 2. White Color (achieved via InGaN Blue LED chip in combination with Yellow Phosphor) Agency Approvals/Compliance 1.
RS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
TEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
A wide variety of detector switches available for various Digital AV devices. Typical Specifications
Switch wide variety of detector switches available for various Digital V devices. Typical Specifications Items Rating max. min. Resistive load Contact resistance Initial /fter operating life Operating
MULTILAYER CHIP BEADS EMI SUPPRESSORS
MULTILAYER CHIP BEADS EMI SUPPRESSORS FEATURES Multilayer technology, offering Monolithic structure, excellent for high reliability % Magnetic Shielding, absolutely ZERO CROSS TALK Excellent solderability
Class 1, 100 V (DC) (flanged types) Miniature ceramic plate capacitors
FEATURES High-frequency circuits Temperature compensating High stability Space saving. APPLICATIONS In a great variety of electronic circuits, e.g. in filters and tuning circuits where high stability and/or
Resistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
SMD Wire Wound Chip Inductors / NLD TYPE(For High Q)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications:
ASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet
ASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
Green Commodity Thick Film Chip Resistors
Green Commodity Thick Film Chip Resistors FEATURES High volume product suitable for commercial applications Green resistor - does not use exemptions Material categorization: for definitions of compliance
ATC 200 A Series BX Ceramic Multilayer Capacitors
200 A Series BX Ceramic Multilayer Capacitors Case A Size Capacitance Range (.055" x.055") 5 pf to 0.01 µf Low ESR/ESL Mid-K Rugged High Reliability Construction Extended VDC Available, the industry leader,
C310T-SC 3.6 mm x 10 mm Time-delay, axial lead ceramic tube fuses
Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop, laptop and notebook Test equipment Agency information curus Recognition
Silicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION VBPW34FAS VBPW34FASR 21726 VBPW34FAS and VBPW34FASR are high speed and high sensitive PIN photodiodes. It is a surface mount device (SMD) including the chip with a 7.5
Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance
Leaded Capacitors Leaded Ordering code system B37979N 1 100 K 0 54 Packaging 51 ^ cardboard tape, reel packing (360-mm reel) 54 ^ Ammo packing (standard) 00 ^ bulk Internal coding Capacitance tolerance
Product family data sheet
Cree XLamp MC-E LED Product family data sheet CLD-DS16 Rev 11A MC-E White MC-E Color MC-E Dynamic White www.cree.com/xlamp Product Description The XLamp MC-E LED is a family of lighting-class, multi-chip
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
Switching Diode CD4148WN 1:6
Switching Diode CD4148WN 1:6 Switching Diode CD4148WN FEATURES Silicon epitaxial planar diode SMD chip pattern, available in various dimension included 0805 Leadfree and RoHS compliance components For
GM5BW96380A. Light Emitting Diode GM5BW96380A. Features. Agency Approvals/Compliance. Applications. 1. RoHS compliant
GM5BW96380A Light Emitting Diode Features 1. High brightness (2450 mcd @ I F =20mA) 2. White Color (achieved via InGaN Blue LED chip in combination with Yellow Phosphor) Agency Approvals/Compliance 1.
ASMT-QYBG / ASMT-QYBH / ASMT-QYBJ 0.5W Warm White Power PLCC4 Surface Mount LED Datasheet
ASMT-QYBG / ASMT-QYBH / ASMT-QYBJ 0.5W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
ISA-PLAN // Precision resistors. SMS // Size Features
Features 5 W power rating at 70 C Constant current up to 25 A (5 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant
200 mw Power derating above 25 o P. tot
Switching Diode CD4148WSP FEATURES Silicon epitaxial planar diode SMD chip pattern, available in various dimension included 1206 & 0603 Leadfree and RoHS compliance components For small signal switching
Table of Contents. DS133 LUXEON TX Product Datasheet Lumileds Holding B.V. All rights reserved.
Illumination LUXEON TX Extreme efficacy and best performance with compatibility to LUXEON T LUXEON TX is designed to deliver high efficacy with high flux density to enable tight beam control in directional
MF-MSMF Series - PTC Resettable Fuses
*RoHS and AE-Q00 OMPLIANT Features ompliant with AE-Q00 Rev-- Stress Test Qualification for Passive omponents 00 % electrically compatible with all previous generations of 8 SMT devices ompatible with
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
TEST REPORT. NO.: A001R Date: Dec 27, 2013 Page 1 of 13
NO.: A001R131220047001 Date: Dec 27, 2013 Page 1 of 13 Applicant: Jinyun Lanxin Electronic Technology Co., Ltd. Address: NO.2XINMIN ROAD,DONGSHAN INDUSTRIAL AREA WUYUN TOWN JINYUN CONUNTY,LISHUI CITY,ZHEJIANG,CHINA
Control Standard for Handling Chemical Substances in Products, Parts and Materials
Control Standard for Handling Chemical Substances in Products, Parts and Materials (for Suppliers) The 9 th Edition Hitachi Maxell, Ltd. 1 Contents 1. Purpose...3 2. Scope... 3 3. Terms and definitions..3
PRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
C2D05120A Silicon Carbide Schottky Diode Zero Recovery Rectifier
C2D512A Silicon Carbide Schottky Diode Zero Recovery Rectifier RM = 12 V ( =135 C) = 8.5 A Q c = 28 nc Features 1.2kV Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency
ASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED. Datasheet
ASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet Description The Avago Technologies ASMT-UYBx series 0.25W Cool White Power PLCC4 SMT LED lamps use InGaN chip technology and
CHIP TRIM CERAMIC TRIMMER CAPACITORS AT 0300 RoHS & AT 1300 RoHS
AT 0300 & AT 1300 SURFACE MOUNT TRIMMER CAPACITORS, COMPLIANT Description Very compact package type Ceramic dielectric Special design for reflow soldering use Rated voltage 100 VDC Low temperature coefficient
EAPL4040WA1. SMD Side View LEDs PRELIMINARY. Features. Applications.
SMD Side View LEDs PRELIMINARY Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. ESD protection. Applications OA
C2D10120A Silicon Carbide Schottky Diode Zero Recovery Rectifier
C2D112A Silicon Carbide Schottky Diode Zero Recovery Rectifier RM RM = 12 12 V V ( =135 C) = 1 = 14.5 A A Q c = 61 nc 61 nc Q c Features 1.2kV Schottky Rectifier Zero Reverse Recovery Current Zero Forward
NTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
1 310 nm FOR 156 Mb/s, 622 Mb/s, 1.25 Gb/s, InGaAsP MQW-FP LASER DIODE
DESCRIPTION 0 nm FOR 56 Mb/s, 6 Mb/s,.5 Gb/s, InGaAsP MQW-FP LASER DIODE The is a 0 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-. These devices are designed
RoHS Features and Application
MCM1012 SERIES LOW PROFILE TYPE (Chip Filter) RoHS Features and Application.Powerful components with composite co-fired material to solve EMI problem for high speed differential signal transmission line