Maximum pressure 80 bar

Transcription

1 Maximum pressure 80 bar F l o w r a t e s t o 0 0 l / m i n

2 LMP 0 Maximum pressure 80 bar F l o w r a t e s t o 6 0 l / m i n

3 Technical data LMP 0 Filter housing (Materials) Head: luminium Housing: ataphoresis painting ypass valve: rass/luminium Pressure LMP 0 length: Working pressure: 80 bar (8 MPa) Test pressure: 0 bar ( MPa) urst pressure: 90 bar (9 MPa) Pulse pressure fatigue test: cycles with pressure from 0 to 80 bar (8 MPa) Temperature From -5 to +0 NR seals series, compatible with: Mineral oils to ISO 9 - aqueous emulsions synthetic fluids, water and glycol. V series FPM seals, compatible with: Synthetic fluids type HS-HFR-HFS-HFU To ISO 9 Filter Element rea Filter element in stainless steel mesh Length Type U Values expressed in cm LMP 0 Style LMP 0 ypass valve Opening pressure.5 bar ±0% Other opening pressures on request. Δp Elements type Series N and W elements: 0 bar Oil flow from exterior to interior. Seals Standard NR Optional FPM Weights (kg) Length LMP0 -,6 LMP0 -,8 LMP0 -, LMP0 -,6 series series V Volumes (dm ) Length LMP0-0,75 LMP0-0,8 LMP0 -, LMP0 -,5 onnections Inlet/Outlet in Line LMP 0 Inlet/Outlet in Line + LMP second inlet port 90 Inlet/Outlet in Line + LMP 6 second outlet port 90 Inlet/Outlet in Line + LMP 8 outlet bypass port 90 ompatibility Housings compatible with: Mineral oils to ISO 9 - aqueous emulsions synthetic fluids, water and glycol. The filter elements are compatible with: Mineral oils to ISO 9, Synthetic fluids queous emulsions, water and glycol (series W required). 0,75 0,5 0,5 0,00 LMP 8 Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0.86 kg/dm to ISO 968. Δp varies proportionally with density. LMP 0 - Δp Housing / Style LMP

4 LMP LMP (plug not included) LMP 6 (plug not included) LMP - Δp Housing OUT / OUT 0,75 0,5 Style LMP Style LMP 0,5 0, LMP 6 - Δp Housings IN / - 0,75 0,5 Style LMP 6 0,5 0, Valves ypass valve pressure drop LMP 0 - LMP - LMP 6 Valves ypass valve pressure drop LMP

5 Filter Sizing orrect sizing of the filter must be based on a variable pressure drop depending on the application: return filter Δp from 0. to 0.6 bar filter on lubrication lines Δp from 0. to 0.5 bar off-line fluid power plants Δp from 0. to 0. bar off-line filter test benches Δp from 0. to 0. bar over-boost filter Δp from 0. to 0.6 bar The pressure drop calculation is performed by adding together the value for the housing and the value for the filter element. The pressure drop in the housing is proportional to the fluid density kg/dm ; all the graphs in the catalogue are referred to mineral oil with density of 0.86 kg/dm. The filter element pressure drop value is proportional to viscosity mm /s, the Y values in the catalogue are referred to viscosity of 0 mm /s. Sizing data for single cartridge, head at top Δp Tot. Δpc Filter housing Δpe Filter element Y Multiplication factor (see below) Q l/min = flow rate V = reference viscosity 0 mm /s (cst) V = operating viscosity in mm /s (cst) Δp Tot. = Δpc + Δpe Δpe = Y : 000 x Q x (V/V) Multiplication factor Y for definition of the pressure drop of filter elements. Reference viscosity 0 mm /s Filter Element Type b s o l u t e F i l t r a t i o n Nominal Filtration Nominal Filtration Series N Series N Series N P 0 P 5 M 5 U 0 6,5,6 8,57 5,759 5,6 0, 7,95,05 8,75 6, 5,066,798 8, 6,0,066,58 5,875,55,97,,86,598, 0,907,65,86,5 0,89 0, 0,5 0,067 0,0558 5

6 imensions LMP ,5,5 H onnection indicator Ø 80 5, Min. 5 6,5 6 60,6 5, onnection indicator (option) Length Filter H mm Filter fixing holes LMP onnections - E E E ouble filter fixing holes /8 UN x epth mm E M0 x epth mm E F G / G / NPT NPT SE SE 6 6

7 LMP LMP 6 onnections - G / G Lateral connections G / G / / NPT NPT / NPT / NPT E F SE SE 6 SE SE 7

8 LMP ,5,5 H 9 onnection indicator Ø 80 5, Min. 5 6,5 6 5, Length Filter H mm 60, onnections - Lateral connections G / G / G / NPT G / / NPT E NPT SE / NPT SE F SE 6 SE 8

9 Filter assembly LMP Ordering information LMP Example: LMP 0 0 N P0 Filter element U Example: U0 0 N P0 - Style Filter length 6 - Indicator port No (excluded LMP 8) 6 + (excluded LMP 8) 7 - Filter element - Valves 0 µm 06 6 µm 0 0 µm 6 6 µm 5 5 µm bsolute filtration Inorganic microfibre ßx (c) 000 S - Seals Without bypass valve (excluded LMP 8) With bypass valve Opening pressure:,5 bar With bypass valve Opening pressure: on request NR On request M5 5 µm M60 60 µm P0 0 µm P5 5 µm 8 - ollapse pressure Nominal Filtration Metal mesh Nominal Filtration ellulose 5 - onnection Type G / G / NPT 9 - Options N Δp 0 bar P0 MP Filtri standard Pxx ustomer request NPT E SE F SE 6 MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved. The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. opyright. ll rights reserved. 9

10 LMP 0 0 Maximum pressure 80 bar F l o w r a t e s t o 0 0 l / m i n

11 Technical data LMP 0 Filter housing (Materials) Head: luminium Housing: ataphoresis painting ypass valve: rass/luminium Pressure LMP 0// length: Working pressure: 80 bar (8 MPa) Test pressure: 0 bar ( MPa) urst pressure: 80 bar (8 MPa) Pulse pressure fatigue test: cycles with pressure from 0 to 80 bar (8 MPa) Filter Element rea Filter element in stainless steel mesh Length Type U Values expressed in cm LMP 0 LMP Temperature From -5 to +0 ypass valve Opening pressure.5 bar ±0% Other opening pressures on request. Δp Elements type Series N and W elements: 0 bar Style LMP 0 Style LMP Oil flow from exterior to interior. Seals Standard NR Optional FPM series series V Weights (kg) Length LMP0 -,9 LMP0 -, LMP0 -, LMP0 -,9 Volumes (dm ) Length LMP0-0,75 LMP0-0,8 LMP0 -, LMP0 -,5 Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0.86 kg/dm to ISO 968. Δp varies proportionally with density. ompatibility Housings compatible with: Mineral oils to ISO 9 - aqueous emulsions synthetic fluids, water and glycol. The filter elements are compatible with: Mineral oils to ISO 9, Synthetic fluids queous emulsions, water and glycol (series W required). NR seals series, compatible with: Mineral oils to ISO 9 - aqueous emulsions synthetic fluids, water and glycol. V series FPM seals, compatible with: Synthetic fluids type HS-HFR-HFS-HFU To ISO 9 0,75 0,5 0,5 0,00 LMP 0/ - Δp Housing LMP LMP

12 LMP Type LMP Type Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0.86 kg/dm to ISO 968. Δp varies proportionally with density. LMP - Δp > > 0,75 Style LMP Type 0,5 0, ooler 6 LMP - Δp Housing with check valve bar setting ooler Style LMP Type 8 Type Type Valves ypass valve pressure drop LMP 0/LMP 6 LMP - Δp Housing with check valve bar setting Type Type

13 Filter sizing orrect sizing of the filter must be based on a variable pressure drop depending on the application: return filter Δp from 0. to 0.6 bar filter on lubrication lines Δp from 0. to 0.5 bar off-line fluid power plants Δp from 0. to 0. bar off-line filter test benches Δp from 0. to 0. bar over-boost filter Δp from 0. to 0.6 bar The pressure drop calculation is performed by adding together the value for the housing and the value for the filter element. The pressure drop in the housing is proportional to the fluid density kg/dm ; all the graphs in the catalogue are referred to mineral oil with density of 0.86 kg/dm. The filter element pressure drop value is proportional to viscosity mm /s, the Y values in the catalogue are referred to viscosity of 0 mm /s. Sizing data for single cartridge, head at top Δp Tot. Δpc Filter housing Δpe Filter element Y Multiplication factor (see below) Q l/min = flow rate V = reference viscosity 0 mm /s (cst) V = operating viscosity in mm /s (cst) Δp Tot. = Δpc + Δpe Δpe = Y : 000 x Q x (V/V) Multiplication factor Y for definition of the pressure drop of filter elements. Reference viscosity 0 mm /s Filter Element Type b s o l u t e F i l t r a t i o n Nominal Filtration Nominal Filtration Series N Series N Series N P 0 P 5 M 5 U 0 6,5,6 8,57 5,759 5,6 0, 7,95,05 8,75 6, 5,066,798 8, 6,0,066,58 5,875,55,97,,86,598, 0,907,65,86,5 0,89 0, 0,5 0,067 0,0558

14 imensions LMP 0 8 Indicator 0 onnection Indicator onnection Min. 5 H 0 onnections - Fixing holes Length Filter H mm E F G / G / NPT NPT SE SE 6 M0 x epth mm M0 x epth mm /8 UN x epth mm /8 UN x epth mm /8 UN x epth mm /8 UN x epth mm

15 LMP / 8 Indicator onnection Min. 5 H 0 Length Filter H mm LMP Plug not Included onnections - - G Fixing holes M0 x epth mm NPT /8 UN x epth mm F SE 6 /8 UN x epth mm 5

16 Ordering Information LMP0/ Filter assembly LMP Example: LMP 0 N P0 Filter element U Example: U0 0 N P0 - Style 0 - Filter length 6 - Indicator port Without indicator port With indicator port 7 - Filter element 0 µm 06 6 µm 0 0 µm 6 6 µm bsolute filtration Inorganic microfibre ßx (c) Valves 5 5 µm S - Seals Without bypass With bypass valve Opening pressure:,5 bar With bypass valve Opening pressure: on request M5 5 µm M60 60 µm P0 0 µm P5 5 µm Nominal Filtration Metal mesh Nominal Filtration ellulose NR On request 8 - ollapse pressure N Δp 0 bar 5 - onnections Type G / (not for LMP ) G 9 - Options P0 MP Filtri standard Pxx ustomer request / NPT (not for LMP ) NPT E SE (not for LMP ) F SE 6 MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. opyright. ll rights reserved. 6

17 Ordering Information LMP Filter assembly LMP Example: LMP 0 N P0 Filter element U Example: U0 0 N P0 - Style - Filter length 5 - onnections Type G F SE Indicator port Without indicator port With indicator port - Valves Type - Without bypass valve heck valve bar heck valve bar Type - Without bypass valve G heck valve bar H heck valve bar Type - With bypass valve M heck valve bar N heck valve bar Type - With bypass valve 7 - Filter element 0 µm 06 6 µm 0 0 µm 6 6 µm 5 5 µm M5 5 µm M60 60 µm P0 0 µm P5 5 µm bsolute filtration Inorganic microfibre ßx (c) 000 Nominal Filtration Metal mesh Nominal Filtration ellulose Q R - Seals heck valve bar heck valve bar NR 8 - ollapse pressure 9 - Options N Δp 0 bar On request P0 Pxx MP Filtri standard ustomer request MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. opyright. ll rights reserved. 7

18 LMP In-Line Suction and Return Filter 8 Maximum pressure 80 bar F l o w r a t e s t o 6 0 l / m i n

19 Technical data LMP Filter housing (Materials) Head: luminium Housing: ataphoresis painting ypass valve: rass/luminium Pressure LMP length: Working pressure: 80 bar (8 MPa) Test pressure: 0 bar ( MPa) urst pressure: 80 bar (8 MPa) Pulse pressure fatigue test: cycles with pressure from 0 to 80 bar (8 MPa) Filter Element rea Filter element in stainless steel mesh Length Type U Values expressed in cm LMP Temperature From -5 to +0 ypass valve Opening pressure.5 bar ±0% Other opening pressures on request. Δp Elements type Series N and W elements: 0 bar Oil flow from exterior to interior. Seals Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0.86 kg/dm to ISO 968. Δp varies proportionally with density. Standard NR Optional FPM Weights (kg) length LMP -,7 LMP -,9 LMP -, LMP -,7 series series V 8 6 LMP - Δp Housing > > Volumes (dm ) length LMP - 0,75 LMP - 0,8 LMP -, LMP -, ompatibility Housings compatible with: Mineral oils to ISO 9 - aqueous emulsions synthetic fluids, water and glycol. The filter elements are compatible with: Mineral oils to ISO 9, Synthetic fluids queous emulsions, water and glycol (series W required). NR seals series, compatible with: Mineral oils to ISO 9 - aqueous emulsions synthetic fluids, water and glycol. V series FPM seals, compatible with: Synthetic fluids type HS-HFR-HFS-HFU To ISO Valves ypass valve pressure drop LMP

20 Style - - E - F Style G - H bsolute filtration 0 bsolute filtration 0,8,,8,,, 0,7 0, ,8, bsolute filtration 6,8, bsolute filtration 6,, 0,7 0, bsolute filtration 5 bsolute filtration 5,8,,8,,, 0,7 0, Filter length

21 LMP Style - - E - F LMP Style G - H Pump Return Tank Tank Return Pump Symbols Style LMP Style E LMP Style G LMP Style LMP Style F LMP Style H LMP

22 Filter sizing orrect sizing of the filter must be based on a variable pressure drop depending on the application: return filter Δp from 0. to 0.6 bar filter on lubrication lines Δp from 0. to 0.5 bar off-line fluid power plants Δp from 0. to 0. bar off-line filter test benches Δp from 0. to 0. bar over-boost filter Δp from 0. to 0.6 bar The pressure drop calculation is performed by adding together the value for the housing and the value for the filter element. The pressure drop in the housing is proportional to the fluid density kg/dm ; all the graphs in the catalogue are referred to mineral oil with density of 0.86 kg/dm. The filter element pressure drop value is proportional to viscosity mm /s, the Y values in the catalogue are referred to viscosity of 0 mm /s. Sizing data for single cartridge, head at top Δp Tot. Δpc Filter housing Δpe Filter element Y Multiplication factor (see below) Q l/min = flow rate V = reference viscosity 0 mm /s (cst) V = operating viscosity in mm /s (cst) Δp Tot. = Δpc + Δpe Δpe = Y : 000 x Q x (V/V) Multiplication factor Y for definition of the pressure drop of filter elements. Reference viscosity 0 mm /s Filter Element Type b s o l u t e F i l t r a t i o n Nominal Filtration Nominal Filtration Serie N Serie N Serie N P 0 P 5 M 5 U 0 6,5,6 8,57 5,759 5,6 0, 7,95,05 8,75 6, 5,066,798 8, 6,0,066,58 5,875,55,97,,86,598, 0,907,65,86,5 0,89 0, 0,5 0,067 0,0558

23 imensions LMP Indicator 8 onnection Min. 5 H 9 7 Length Filter H mm F Threaded onnections - - G SE 6 Fixing holes M0 x epth mm /8 UN x epth mm

24 Symbols Style LMP Style E LMP Style G LMP Style LMP Style F LMP Style H LMP

25 Filter assembly LMP Ordering information LMP Example: LMP 0 N P0 Filter element U Example: U0 0 N P0 - Style - Filter length - Valves E F G 5 - onnections Type G F SE Indicator port No Port G /8 For pressure switch Port G / For pressure switch ifferential indicator port 7 - Filter element 0 0 µm 6 6 µm 5 5 µm 8 - ollapse pressure bsolute filtration Inorganic microfibre ßx (c) Seals H see SYMOLS (ref. to pages and ) NR V FPM N 9 - Option P0 Pxx Δp 0 bar MP Filtri standard ustomer request MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. opyright. ll rights reserved. 5

26 Spare parts a b d c Pos. escription Qty FILTER Series LMP Filter assembly Filter element See order table See order table Seals Kit NR FPM a O-Ring for housing O-R Ø 78,97 x,5 b O-Ring for filter element O-R 5 Ø, x,5 c Gasket for indicator NR FPM d O-Ring for indicator O-R 050 Ø, x,78 Indicator Plug TH TV - Indicators See order table 6

27 Spare parts c d b a Pos. escription Qty FILTER Series LMP 0 Filter assembly Filter element See order table See order table Seals Kit NR FPM a O-Ring for housing O-R Ø 78,97 x,5 b O-Ring for filter element O-R 5 Ø, x,5 c Gasket for indicator NR FPM d O-Ring for indicator O-R 050 Ø, x,78 Indicator Plug TH TV - Indicators See order table 7

28 Spare parts d c b a Pos. escription Qty FILTER Series LMP - Filter assembly Filter element See order table See order table Seals Kit NR FPM a O-Ring for housing O-R Ø 78,97 x,5 b O-Ring for filter element O-R 5 Ø, x,5 c Gasket for indicator NR FPM d O-Ring for indicator O-R 050 Ø, x,78 Indicator Plug TH TV - Indicators See order table 8

29 ifferential indicators Order code Pressure: Working pressure 0 bar Pulse pressure fatigue test: cycles with pressure from 0 to 0 bar ( MPa) Example: NM 7 H P0 - Styles SERIES Z VISUL utton NR KR Electrical Electrical-Visual h. 0 6 NM Electrical IP 67 Z Visual U Visual - ifferential trip pressure Visual indicator with manual reset. Nylon signalling button. 6 bar ± 0% (with bypass filter) 7 5 bar ± 0% (without bypass filter) - Power supply voltage (only for style KR - only voltage ) Volt 0 Volt utton depressed position utton raised position, Red Weight: Tightening torque: = cartridge clean. = cartridge clogged. 8 gr. 60 Nm. - Seals H HNR Standard SERIES U VISUL Silicone membrane utton V FPM x Others on request 5 - Thermostat (only for style NM) h. 0 Without Electrical connector (only for style NM) onnector MP superseal series.5 onnector MP timer onnector EUTSH T 0--P onnector EUTSH T 0--P U indicator provide to accurate view indication of filter element condition. Visual signal utton depressed position utton rised position onnection G / Tightening torque: 65 Nm Weight: 8 gr Red button down: clean cartridge Red button up: clogging cartridge = cartridge clean. = cartridge clogged. Length electrical cable 0,5 m 7 - Option P0 MP standard 0

30 SERIES NR ELETRIL onnector EN /ISO 00 SERIES KR ELETRIL/VISUL 5 LE h. 0 N.. N.O. h. 0 LE N.. N.O. Switching type Max. contact rating Max power supply voltage Electrical connection EN able gland PG 9 Protection rating IP 65 onnection G / Tightening torque: Weight: N/O or N/ contacts (change over ontact) 0,8 / Vdc 0,7 / 5 Vdc 0Vac 65 Nm gr Switching type Max. contact rating Max power supply voltage N/O or N/ contacts (change over ontact) 0,8 / Vdc 0,7 / 5 Vdc Vdc - 5 Vdc/ac - 0 Vac Electrical connection EN visual indicator by LE GREEN LE = lean element. RE LE= locched element. able gland PG 9 Protection rating IP 65 onnection G / Tightening torque: Weight: 65 Nm gr SERIES NM ELETRIL Min. 0 Min. 0 Min. 0 h. 7 h. 7 h. 7 Length indicator NM Without thermostat With thermostat NM - NM h. 7 h. 7 NM - NM - NM T 50 Switching type Max. contact rating N/O contacts N/O thermostat 0,8 / Vdc 0,7 / 5 Vdc Max power supply voltage Max. 0Vdc Electrical connection onnector MP superseal series.5 onnector MP timer onnector EUTSH T 0--P onnector EUTSH T 0--P Lenght electrical cable 0,5 m Protection rating IP 67 onnection G / Tightening torque: 65 Nm Weight: 5 gr MP 0 UK 00

31 Recommended maximum flow rate - Pressure drop of filter assembly equal to Δp 0,7 bar. - Oil kinematic viscosity 0 mm /s (cst). - ensity 0,86 kg/dm. LMP 0/8 6 0 Filtration Filter length M5 P P M5 P P M5 P P M5 P P

32 New Headquarters: MP FILTRI S.p.. Italy Via Maggio, n Pessano con ornago (Milano) Italy Tel. +9.0/9570. Fax +9.0/ GRET RITIN MP FILTRI U.K. Ltd. ourton Industrial Park ourton on the Water Gloucestershire GL5 HQ UK Phone: Fax: GERMNY MP FILTRI GmbH m Wasserturm Heusweiler/Holz Phone: Fax: service@mpfiltri.de FRNE MP FILTRI FRNE Sas Parc d activités des hanteraines 8 rue du ommandant d Estienne d Orves, Immeuble 996 Villeneuve la Garenne - France Phone: +(0) Fax: +(0) sales@mpfiltrifrance.com http: // US MP FILTRI US Inc. 055 Quaker Pointe rive Quakertown, P 895 Phone: Fax: sales@mpfiltriusa.com N MP FILTRI N Inc. 80 Four Valley rive oncord Ontario anada LK 5Z Phone: Fax: mail@mpfiltricanada.com RUSSIN FEERTION MP FILTRI RUSSI Phone/Fax: +7(95) P.O. ox 756 Moscow, Russia mpfiltrirussia@yahoo.com HIN MP FILTRI (Shanghai) o. Ltd. 80 Lianxi Road, 8 ld - Floor Shanghai, Pudong 00 P.R. hina Phone: Fax: sales@mpfiltrishanghai.com INI & UE MP FILTRI INI & UE Phone: s.mishra@mpfiltri.com http: //