2015 CATALOG. Film Capacitors. industrial.panasonic.com/ww/products/capacitors

Transcription

1 2015 CATALOG Film Capacitors industrial.panasonic.com/ww/products/capacitors

2 Memo

3

4 Main Applications & Main Products

5 Main Applications & Main Products

6 Summary of Products Stacked Metallized Film Chip Capacitor Stacked Metallized Type Metallized Type Interference Suppressors (Safety standard approval capacitors) Dielectric Type Appearance Stacked Metallized PPS Film Chip Capacitor Stacked Metallized PEN Film Chip Capacitor Stacked Metallized Plastic Film Chip Capacitor Stacked Metallized Plastic Film Capacitor Metallized Polyester Film Capacitor Metallized Polypropylene Film Capacitor Metallized Polypropylene Film Capacitor Metallized Polyester Film Capacitor Metallized Polyester Film Capacitor for Noise Suppression of Automobile ECHU(X) ECHU(C) ECWU(X) ECWU(C) ECWU(V16) ECPU(A) ECQV(L) ECQV(M) ECQE(F) ECQE(B) ECQE(T) ECWF(L) ECWF(A) ECWFD ECWH(V) ECWH(A) ECWH(C) EZPE ECQUA ECQUL ECQUG ECQE Operating Temp Rating Feature Application Page µf to 0.22 µf Non-inductive, High density Stacked mounting to 16 VDC, 16 Tight C-Tol C 50 VDC Reflow soldering 55 Non-inductive, High density mounting µf to 0.22 µf Stacked Resonance circuit to VDC Tight C-Tol. for LCD B/L +105 C Reflow soldering inverter unit 55 Non-inductive, High density µf to µf Reflow soldering mounting to VDC +105 C 55 Non-inductive, Ringer circuit µf to 1.0 µf Reflow soldering telephone PBX to VDC to 630 VDC Noise suppressor DC Blocking for +125 C xdsl 55 Non-inductive, Ringer circuit µf to 0.12 µf Reflow soldering telephone PBX to VDC Noise suppressor DC Blocking for +85 C xdsl 40 Non-inductive, Coupling 0.10 µf to 1.0 µf Reflow soldering to VDC +85 C µf to 2.2 µf Epoxy resin General purpose coating to 50 VDC, 63 VDC, 29 Non-inductive +105 C 100 VDC µf to 10 µf Epoxy resin General purpose coating Noise to 100 VDC to 1250 VDC, 32 Wide capacitance suppressor +105 C 125 VAC, 250 VAC range µf to 4.7 µf Epoxy resin General purpose coating Noise to 250 VDC 41 Miniaturization of suppressor +105 C 125 VAC ECQE(F) type µf to 10 µf Excellent moisture Electric circuit to 250 VDC to 630 VDC resistance of high humidity 45 equipment +105 C 125 VAC, 250 VAC µf to 2.4 µf Epoxy resin coating High frequncy Low D.F high current to 400 VDC 50 Excellent moisture circuit +105 C 630 VDC resistance 40 Miniaturization of Active filtering 0.10 µf to 6.8 µf ECWF(L) type circuit to VDC to 630 VDC Low D.F High frequency +105 C high current circuit 40 Epoxy resin coating High frequncy 0.1 µf to 4.7 µf Low D.F high current to VDC Excellent moisture circuit +110 C resistance 40 Epoxy resin High frequency µf to 0.10 µf coating high current to VDC to 2000 VDC Low D.F circuit +105 C Small in size 40 Epoxy resin General µf to µf coating resonant to VDC, 1600 VDC Low D.F circuits +105 C Small in size 40 Epoxy resin General resonance to µf to 0.33 µf coating circuit C 630 VDC to 3000 VDC Low D.F Microwave oven +85 C IH resonance circuit 40 High safety DC filtening 10 µf to 110 µf Long product life, DC linlt circuit to 73 VDC to 1300 VDC High relieblly +85 C Low loss 40 UL,CSA,VDE, Noise 0.10 µf to 2.2 µf Approved suppressor for to VAC (ClassX2) AC line +110 C 40 UL,CSA,VDE Noise µf to 2.2 µf Approved suppressor for to VAC(250 VAC) (ClassX2) AC line +100 C 40 Equipped with a safety Noise µf to 1.0 µf mechanism suppressor for to VAC(250 VAC) UL,CSA,NEMKO,ENEC AC line +100 C Approved(ClassX1) 40 Box type Noise 0.47 µf, 2.2 µf, 4.7 µf suppressor for to VDC automobile +130 C Operating temp. : Including temperature-rise on unit surface. Refer to each product page for details.

7 Summary of Products

8 Precautions and Safety Considerations SAFETY PRECAUTIONS 1. The Film Capacitors shown in this catalogue contain a film based dielectric which may be flammable under certain operating conditions. When in use, they can either emit smoke and/or ignite should the product be defective. It is recommeded covering the surrounding resin with flame-resistant materials or case as needed particularly when used long-term. 2. Prior to use, please make sure that failure of the film capacitors does not have any negative effects on other surrounding electronic circuit components and devices that would possibly cause damage. Proper safety measures should be taken using fail-safe protective circuit designs to help prevent other devices of becoming unsafe. Example: a.state in which basic performance of automobiles (run, turn and stop) b.false operations c.smoke emission/ignitions (Example : A large current flowed to the speaker because of the short circuit of the capacitor for the coupling of car audio, and it was smoking from the speaker) We request the user to observe the following: 1. Information of this catalogue is subject to change without notice. Prior of use, the latest written agreement on delivery specifications ought to be prepared beforehand. Please make sure that the product you purchased is used in compliance with the descriptions in the aforementioned specifications. The precautions in using film capacitors follow the JEITA RCR-1001A "Safety Application Guide on components for use in electronic and electrical equipments" and JEITA RCR-2350C "Safety Application Guide for fixed plastic film capacitors for use in electornic equipment". Please refer to the above guidelines for details. Additional technical specifications are available upon request. 2. The Film Capacitors listed in this catalogue are designed and manufactured specifically for general electronic devices, including audio-video equipment, home appliance, office equipment and data communication equipment etc.. Accordingly, it is strongly recommended that the user contact us in advance if the parts are to be used for the following devices (items 1~12), which require having advanced security measures: (1) Transport Equipment (motor vehicles, airplanes, trains, ships, traffic signal controllers) (2) Medical Equipment (life-support equipment, pacemakers for the heart, dialysis controllers) (3) Aircraft Epuipment, Aerospace Equipment (airplanes, artifical satellites, rockets, etc.) (4) Submarine Equipment (submarine repeating equipment, etc.) (5) Generatrion Control Equipment (equipment for atomic/hydraulic/heat power plants) (6) Information Processing Equipment (large scale computer system) (7) Electric Heating Appliance, Burning Apparatus (8) Rotary Motion Equipment (9) Security Systems (10) Robots (11) Lighting Equipment (12) And any similar types of equipment It is strongly recommended that further investigation or analysis is performed to verify the compatibility of the film capacitors when used in conjunction with any life-supporting equipment like electronic aviation controllers, automotive driving controllers and engine controllers (i.e:fuel injection, ignition, etc.). 3. This catalogue indicates the quality and performance of film capacitors as discrete components. Prior of using the film capacitors, the user should evaluate and verify its quality and performance after it has been assembled on the product. Further care should be taken when parts are subjected under voltages, currents and/or temperatuers that go beyond the specified ratings. These conditions should not be applied to the film capacitors even if defects such as short or open of other parts are found in the circuit. 4. When exporting product the user is required to comply with export-related regulations, including Foreign Exchange and Foreign Trade laws.

9 Other Notices 1. Our film capacitors comply with the RoHS Directive. Precautions and Safety Considerations 2. Any ozone-depleting substances (ODS), the use of which is restricted in the Montreal Protocol are not used in our manufacturing process. 3. Technical information shown in this catalogue, which is intended for describing the typical operation, application circuits, and so forth of our products, means neither to warrant our company's and third parties' intellectual property rights and other rights nor to grant a license on the occasion of the use of the products listed in this catalogue. 4. Product characteristics indicated in this catalogue, which are shown as representative values, does not warrant the performance of our products.

10 Permissible AC voltage corresponding to DC rated voltage Permissible voltage (R.M.S) in alternating current corresponding to DC Rated Voltage 1. In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor, permissible voltage (R.M.S) in alternating current is shown in the following table. 2. Permissible voltage (R.M.S) in alternating current is not an AC rated voltage. 3. The capacitor of DC rating should not be used at the primary side of power supplies. 4. In case of using ECWH(V) type in CRT horizontal resonance circuit, please apply voltage not higher than permissible voltage (peak-to-peak : p-p) in CRT horizontal resonance circuit shown in the following table. 5. The peak value (zero-to-peak) including pulse of voltage applied capacitor of DC rating should be less than DC rated voltage. The permissible pulse current is different in each type of the capacitor, please request the product specifications. 6. Please request the product specifications or consult us about details of permissible voltage (R.M.S) in alternating current. ECHU(X) ECHU(C) ECWU(X) ECWU(C) ECPU(A) ECQV(L) ECQV(M) ECQE(F) ECQE(B) ECQE(T) ECWF(A) ECWFD ECWF(L) ECWH(A) ECWH(C) ECWH(V) Type & Series ECHU1C(X) ECHU1H(X) ECHU1(C) ECWU1(X) ECWU1(C) ECWU2(C) ECWUC2J ECPU1C(A) ECQV1H(L) ECQV1J(M) ECQV1(M) ECQE1(F) ECQE2(F) ECQE4(F) ECQE6(F) ECQE10(F) ECQE12(F) ECQE2(B) ECQE2(T) ECQE4(T) ECQE6(T) ECWF2(A) ECWF2W(A) ECWFA2J ECWFD2W ECWF4(L) ECWF2W(L) ECWF6(L) ECWH8(A) ECWHA3C ECWH6(C) ECWHC3B ECWHC3F ECWH10(V) ECWH12(V) ECWH16(V) ECWH20(V) Rated voltage (DC) 16 V 50 V 100 V 100 V 100 V 250 V 630 V 16 V 50 V 63 V 100 V 100 V 250 V 400 V 630 V 1000 V 1250 V 250 V 250 V 400 V 630 V 250 V 450 V 630 V 450 V 400 V 450 V 630 V 800 V 1600 V 630 V 1250 V 3000 V 1000 V 1250 V 1600 V 2000 V Permissible voltage (R.M.S) in alternating current 11 V 30 V 40 V 40 V 40 V 125 V 250 V 12 V 40 V 40 V 63 V 63 V 150 V 200 V 250 V 400 V V 125 V 150 V 200 V 250 V 125 V 84 V 141 V 84 V 141 V 160 V 223 V 283 V 700 V 223 V 450 V 1167 V 283 V 354 V 424 V Permissible voltage (p-p)in CRT horizontal resonance circuit V1000 Vp-p V1200 Vp-p 531 V V1 Vp-p

11 Completed standardization products in the 2009 fiscal year Information of standardization products Dielectric Type Parts Number Style ECHU1H(C) ECHU1H***( )C( ) SMD Type ECPU(B) ECPU ***( )B( ) AC capacitor ECHD ECHD ***( )( )( ) ECWD ECWD ***( )( )( ) ECWX ECWX ***( )( )( ) ECWF(K) ECWF ***( )K( ) Metallized PP ECWH(U) ECWH ***( )U( ) The above series was discontinued in March/10. Completed standardization products in the 2010 fiscal year Dielectric Type Parts Number Style ECWU1H(C) ECWU1H***( )C( ) SMD Type ECHU01(X) ECHU01***( )X( ) ECWF2(S) ECWF2***( )S( ) Metallized PP ECWF2(B) ECWF2***( )B( ) The above series was discontinued in September/10. Standardization products in the 2011 fiscal year Dielectric Stacked Metallized Type Metallized PET Standardization products Please use following alternative products for new design. Alternative Products (Standard) Type Parts Number Style Type Parts Number Style ECQV1H(Z) ECQV1H***( )Z( ) No substitution ECQV1H(M) ECQV1H***( )M( ) ECWFD ECWFD2W***( )( ) ECQE2W(H) ECQE2W***( )H( ) ECWF2W(A) ECWF2W***( )A( ) ECQE10(F) [0.001μF to μF] ECQE10***( )F( ) ECQE12(F) [0.001μF to μF] ECQE12***( )F( ) Standardization products in the 2012 fiscal year Dielectric Safety standard approved Standardization products Please use following alternative products for new design. Alternative Products (Standard) Type Parts Number Style Type Parts Number Style ECQUA ECQUAAF***( )( ) ECQUN ECQU2A***( )N( ) ECQUL ECQU2A***( )L( ) ECQUY ECQU2A***( )Y( ) AC capacitor ECHA ECHAMM***( )( )( ) No substitution ECQE10(F) Metallized PET [0.27μF or more] ECQE10***( )F( ) No substitution Safety standard approved S k kill ECQJ ECQJ0186XB ECQJ0187XB ECQUL [0.001μF to μF] ECQU2A***( )L( ) No substitution Discontinued products in the 2014 fiscal year Dielectric Stacked Metallized Type Standardization products Type Parts Number Style Alternative Products ECQV ECQV ***( )( )( ) No substitution Last purchasing order Last shipment Last purchasing order: 31/Mar/2015 Last shipment : 30/Jun/ FC9 -

12 Checklist before Inquiry When making an order : When ordering capacitor, please provide information on the items below : Ordering Check list(capacitor) Class Item Examples Spsecifications Rated Voltage Capacitance Capacitance Tolerance Applied Equipment Applied Circuit, Purpose Enviroment Temperature Humidity Applied Voltage Voltage Waveform Current Current Waveform Frequency Self Temperature-rise Temperature Coeffidient Mounting Method Mounting Machine Method Conditions Preheat Conditions Detergent Cleanig Method Cleaning Conditions Shape Size Terminal Type Terminal Form Reflow Temp. 125 VAC, 630 VDC etc. 100 pf, µf, 1.0 µf etc. ±5 %, ±10 %, ±20 % etc. TV, Microwave oven, Car, Lighting apparatus etc. TV horizontal deflection circuit, Snubber circuit, etc. In-house, Outdoor, Bathroom, Cold district etc. 10 C to +60 C, 30 C to +105 C etc. 5 to 75 %RH, 45 to 95 %RH etc. 100 Vrms, 125 Vo-p, 5 VDC etc. Sinusoidal wave, Half wave, Full wave, Rectangular wave, Pulse etc. 10 marms, 5 Ap-p, 65 Ao-p etc. Sinusoidal wave, Sawtooth type wave, Pulse etc. 50 Hz/60 Hz, khz etc. 8 C, 20 C etc. (Self temperature-rise=capacitor surface temperature Ambient temperature) 150 ppm/ C, +200 ppm/ C etc. Manual, Automatic Panasert R HU etc. Manual, Automatic Temperature 260 C, Dipping time 4 sec, Repeating times 2 time etc. Heat method, Temperature, Time etc. Freon substitute etc. (Specify the name) Soaking,Ultrasonic etc. 5 min.dipping, 5 min. drying etc. Coated, Cased, Chip (L) (T) (H) (Lead-pitch) / Land dimensions etc. 23 mm 10 mm 18 mm 20 mm Lead wire, Fast-on terminal etc. Straigt, Cut, Crimped, Taped etc. Pre heat temp., Main heat temp., Temp. monitoring method etc. Shape/Size Soldering Mounting Conditions Rating Others Notes: 1.When you specify custom type(made-to-order),new tools & jigs or new equipment might be required on our side. Your notice on development schedule and estimated quantity would help in preparation of our response to your order. 2.If you designate your own part number, please let us know. 3.The information in this catalog is furnished for guidance and is subject to change without notice. 4.Specifications shall be agreed in written form of approval sheet.

13 Temperature & Frequency Characteristics Temperature Characteristics Typical curve ECWF ECWH ECWF ECWH ECWF ECWH Frequency Characteristics Typical curve ECWF ECWH ECWF ECWH

14 Taping Specification for Automatic Insertion(Mounting) Taping Type Shape Name Specification Taping Style Standard taping 5mm lead spacing with 12.7 mm body width AD, AS, AB Radial type Odd size taping ( ) 5/ mm lead spacing with 15 mm & up body width B, C, D, E, F Odd size taping ( ) Other than above Please consult Chip type Embossed taping Apply for chip type 8,12,16,24 mm carrier tape Radial type taping Standard taping (Unit : mm) P P 0 F H 0 H max (H) max. Note : H1 dimension is based on insertion machine Panasert RH series made by Panasonic. Consult with Panasonic technical staff when using other insertion machines max. Odd size taping (1) (Unit : mm) Style B P Style C P Style D P Style E P Style F H1 H0 F H1 H0 F H1 H0 F H1 H0 F P0 P0 P0 P0 P P 0 F H 0 H max max max max. Note : H1 dimension is based on insertion machine Panasert RH series made by Panasonic. Consult with Panasonic technical staff when using other insertion machines max. Odd size taping ( ) If the specification of taping is changed by various conditions, including, dimensions, lead spacing and insertion machine, please contact the nearest sales office for further information. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.

15 0D0 Taping Specification for Automatic Insertion(Mounting) Dimensions in mm(not to scale) Style AD, Style B, Style D, Style F P2 P h H1 F P1 W W1 H0 W2 L t Style C, Style E P H1 F W0 H0 P0 P0 P'0 Code Style AB, AD, AS Style B Style C Style D, F Style E P P0 P 0 P1 P2 F Δh W W0 W1 W2 H0 H ± ± ± ± ± ± max. ød0 t L... Style AS is in code H. ±1.0 ± ±0.5 ± ± ± max. 25.4± ± ± ± ± ± 0.2 0± ± min. 9.0± ± max max. 4.0± ± max. ±1.0 ± ±0.50 ±1.3 ± ± 44.0max. 30.0±1.0 ± ± ±0.50 ±1.3 ± ± max Note : H1 dimension is based on insertion machine Panasert RH series made by Panasonic. Consult with Panasonic technical staff when using other insertion machines. Packing Packing (Unit : mm) Box depends on capacitor, s dimensions, taping style and quantity.

16 Taping Specification for Automatic Insertion(Mounting) Chip type embossed taping Embossed taping Standard packaging quantities Size code Reel Quantities K1 ø pcs/reel J1, J2, H1, H2 ø pcs/reel H3, G1, G2, G3 ø pcs/reel E1, E2, D1, D2 ø pcs/reel E3a, E3, D3, D4, D5 ø pcs/reel B, Z ø pcs/reel X, Y, V ø pcs/reel Size code A0± 0.10 B0 ± 0.10 W ± 0.3 F ± 0.05 E ± 0.10 P1 ± 0.1 P2 ± 0.05 P0 ± ød0 aa ød1 aa T± 0.05 T2 ± 0.2 K ± 0.1 K J J H1, H H G1, G G E E E3a, E D1, D D3, D D B Z Size code X, Y V A 0±0.1 B 0±0.1 W±0.3 F±0.1 E±0.10 P 1±0.1 P 2±0.1 P 0±0.1 ø D 0 0 ø D 1 0 T±0.02 T 2±0.2 K± Reel dimensions Leader part and tape end (Unit : mm) Code Reel size ø 180 Reel size ø 330 Tape width 8 Tape width 12 Tape width 16 A C D E N W W

17 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Product System for Film Chip Capacitor Please confirm in the individual page because the specifications depend on the partial capacitance.

18 Stacked Metallized PPS Film Chip Capacitor Type: ECHU(X) Stacked metallized PPS film as dielectric with simple mold-less construction Features Small in size (minimum size 1.6 mm mm) 85 C, 85 %RH, W.V. 1.0 for hours For reflow soldering RoHS directive compliant Recommended Applications Time-constant Filtering Oscillation and resonance Explanation of Part Numbers Plastic Film Capacitors E C H U X Product code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix Suffix Specifications 1C 1H 16 VDC 50 VDC G ±2 % J ±5 % Tape width Reel diameter Tape width 8 mm 8 mm and diameter 5 size ø180 mm ø330 mm reel is 12 mm prepared. 9 size ø330 mm Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions 55 to VDC50 VDC (50 VDC: 0.12 µf or more: Derating or rated voltage by 1.25 % / at more than 105 ) µf to 0.22 µf (E12) ±2 %(G), ±5 %(J) Between terminals : Rated volt. (VDC) 150 % 60 s tan % (20, 1 khz) 16 VDCIR3000 M (20, 10 VDC, 60 s) 50 VDCIR3000 M (20, 50 VDC, 60 s) Reflow soldering : 260 C max. and 95 sec max. at more than 220 C (Temp. at cap. surface) Please consult us for flow soldering In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Construction Dimensions in mm (not to scale) saize code L W H e g K J J H H H G G G E E D D D

19 Taping Specification for Automatic Mounting Refer to the page of taping specifications Rating, Dimensions & Quantity/Reel Capacitance tolerance : ±2 %(G), ±5 %(J) Cap. (µf) Rated volt. 16 VDC Size L W H Code ECHU1C101X K1 ECHU1C121X K1 ECHU1C151X K1 ECHU1C181X K1 ECHU1C221X K1 ECHU1C271X K1 ECHU1C331X K1 ECHU1C391X K1 ECHU1C471X K1 ECHU1C561X K1 ECHU1C681X K1 ECHU1C821X K1 ECHU1C102X K1 ECHU1C122X K1 ECHU1C152X K1 ECHU1C182X K1 ECHU1C222X K1 ECHU1C272X K1 ECHU1C332X J1 ECHU1C392X J1 ECHU1C472X J1 ECHU1C562X J1 ECHU1C682X J1 ECHU1C822X J2 ECHU1C103X J2 ECHU1C123X H1 ECHU1C153X H1 ECHU1C183X H1 ECHU1C223X H1 ECHU1C273X H2 ECHU1C333X H2 ECHU1C393X H3 ECHU1C473X H3 ECHU1C563X G2 ECHU1C683X G2 ECHU1C823X G3 ECHU1C104X G3 Cap. tol. code Recommended for Land Q'ty Rated volt. 50 VDC Size L W H Code ECHU1H101X J1 ECHU1H121X J1 ECHU1H151X J1 ECHU1H181X J1 ECHU1H221X J1 ECHU1H271X J1 ECHU1H331X J1 ECHU1H391X J1 ECHU1H471X J1 ECHU1H561X J1 ECHU1H681X J1 ECHU1H821X J1 ECHU1H102X J1 ECHU1H122X J1 ECHU1H152X J1 ECHU1H182X J1 ECHU1H222X J1 ECHU1H272X J1 ECHU1H332X H1 ECHU1H392X H1 ECHU1H472X H1 ECHU1H562X H1 ECHU1H682X H1 ECHU1H822X H2 ECHU1H103X H2 ECHU1H123X G1 ECHU1H153X G1 ECHU1H183X G2 ECHU1H223X G2 ECHU1H273X G2 ECHU1H333X G3 ECHU1H393X G3 ECHU1H473X E1 ECHU1H563X E1 ECHU1H683X E1 ECHU1H823X E2 ECHU1H104X E2 ECHU1H124X D1 ECHU1H154X D1 ECHU1H184X D3 ECHU1H224X D4 Q'ty Chip Size Code Land dimensions Reflow soldering A B C K J1,J H1,H2,H G1,G2,G E1,E D1,D3,D It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when Recommender for Land dimensions is adopted.

20 Stacked Metallized PPS Film Chip Capacitor Type: ECHU(C) Stacked metallized PPS film as dielectric with simple mold-less construction Features Small in size Low loss and excellent frequency characteristics For reflow soldering RoHS directive compliant Recommended Applications Time-constant Filtering Oscillation and resonance Resonance circuit for LCD backlight inverter unit Explanation of Numbers E C H U 1 C Product code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix Suffix VDC G ±2 % J ±5 % Tape width 9 12 mm V 16 mm Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions 55 to VDC µf to 0.22 µf(e12) ±2 %(G),±5 %(J) Between terminals : Rated volt. (VDC) 150 % 60 s tan % (20, 1 khz) IR3000 (20, 100 VDC, 60 s) Reflow soldering : 260 C max. and 95 s max. at more than 220 C (Temp. at cap. Surface) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage.

21 Construction Dimensions in mm (not to scale) size code L W H E E E3a E D D D D D Z Y Refer to the column Rating,Dimensions&Quantity Chip Taping Specification for Automatic Mounting Refer to the page of taping specifications. Rating, Dimensions & Quantity/Reel Capacitance tolerance: ±2 %(G), ±5 %(J) Cap.(µF) ECHU1103C9 ECHU1123C9 ECHU1153C9 ECHU1183C9 ECHU1223C9 ECHU1273C9 ECHU1333C9 ECHU1393C9 ECHU1473C9 ECHU1563C9 ECHU1683C9 ECHU1823C9 ECHU1104C9 ECHU1124C9 ECHU1154CV ECHU1184CV ECHU1224CV Rated volt. 100 VDC L W H Size Code E1 E1 E2 E2 E3a E3 D1 D2 D3 D4 D5 Z Z Z Y Y Y Cap. tol. code Q'ty Recommended for Land Size code Land dimensions Reflow soldering A B C E1,E2,E3a,E D1,D2,D3,D4,D Z Y It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when Recommender for Land dimensions is adopted.

22 Stacked Metallized PEN Film Chip Capacitor Type: ECWU(X) Stacked metallized PEN film as dielectric with simple mold-less construction Features Small in size (minimum size 3.2 mm 1.6 mm) 85 C, 85 %RH, W.V. 1.0 for hours For reflow soldering RoHS directive compliant Recommended Applications General purpose (Coupling, By-pass) Explanation of Part Numbers E C W U 1 J X 5 Product code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix Suffix VDC J ±5 % Tape width 5 8 mm Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) 55 C to +105 C 100 VDC µf to µf (E12) ±5 % (J) Between terminals : Rated volt. (VDC) 150 % 60 s tan < =1.0 % (20 C, 1 khz) Insulation resistance (IR) IR > =3000 MΩ (20 C, 100 VDC, 60 s) Soldering conditions Reflow soldering : 240 C max. and 60 s max. at more than 220 C (Temp. at cap. surface) (Please consult us for Reflow 250 C max product.) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Construction Dimensions in mm (not to scale) size code L W H e g H = > 1.0 H > = 1.0 G = > 1.0 G = > 1.0

23 Taping Specification for Automatic Mounting Refer to the page of taping specifications. Rating, Dimensions & Quantity/Reel Capacitance tolerance : ±5 %(J) Rated volt. 100 VDC Cap. (µf) L W H Code ECWU1102JX H ECWU1122JX H ECWU1152JX H ECWU1182JX H ECWU1222JX H ECWU1272JX H ECWU1332JX H ECWU1392JX H ECWU1472JX H ECWU1562JX G ECWU1682JX G ECWU1822JX G ECWU1103JX G3 cap. =0.012 > µf : Please use 100 VDC rating of ECWU(C) Q'ty Chip Recommened for Land Size code Land dimensions for reflow soldering A B C H2,H G2,G It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when Recommender for Land dimensions is adopted.

24 Stacked Metallized PEN Film Chip Capacitor Type: ECWU(C) Stacked metallized PEN film as dielectric with simple mold-less construction Features Small in size For reflow soldering RoHS directive compliant Recommended Applications General purpose (Coupling, By-pass) Explanation of Part Numbers E C W U Product code Specifications Dielectric & construction Rated voltage VDC 250 VDC Nominal capacitance C Cap. Tol. Suffix Suffix E C W U V 3 3 Tape width 9 12 mm V 16 mm Product code Dielectric & Rated voltage capacitance Suffix construction VDC Small in sizu, Cap. Tol.:±5 %, Tape width:12 mm E C W U C 2 J Product code Capacitance range Capacitance tolerance Withstand voltage Dielectric & construction Category temp.range (Including temperature-rise on unit surface) Rated voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions Suffix Rated voltage VDC -55 C to +125 C 100 VDC 250 VDC J V capacitance Cap. Tol. Suffix J ±5 % µf to 1.0 µf (E12) µf to 0.12 µf (E12) V Tape width 16 mm 630 VDC µf, µf, µf 100 VDC ±5 %(J), ±10 %(K) (C =0.18 > µf : ±10 %(K)only) 250 VDC ±5 %(J), ±10 %(K) 630 VDC ±5 %(J) Between terminals: Rated volt. (VDC) 150 % 60 s tan < =1.0 %(20 C, 1 khz) C < =0.33 µf 100 VDC, 250 VDC, 630 VDC : IR> = 3000 MΩ (20 C,100 VDC, 60 s) C>0.33 µf 100 VDC : IR> = 1000 MΩ µf (20 C,100 VDC, 60 s) 100 VDC 250 VDC Reflow soldering : 240 C max. and 60 s max. at more than 220 C (Temp. at cap. surface) (Please consult us for Reflow 250 C max. product.) 630 VDC J ±5 % K ±10 % 100 VDC, 250 VDC, 630 VDC (Derating of rated voltage by 1.25 %/ C more than 85 C) Reflow soldering : 250 C max. and 60 s to 150s. at more than 217 C (Temp. at cap. surface) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Please consult us for capacitance range between 0.15 µf and 1.0 µf. ( 250 VDC)

25 Construction Dimensions in mm (not to scale) Taping Specification for Automatic Mounting Refer to the page of taping specifications. Rating, Dimensions & Quantity/Reel Capacitance tolerance : ±5 %(J), ±10 %(K) Cap. (µf) Rated volt. 100 VDC Part No L W H Size code Please use 100 VDC rating ECWU(X) ECWU1123C E1 ECWU1153C E1 ECWU1183C E1 ECWU1223C E1 ECWU1273C E1 ECWU1333C E1 ECWU1393C E1 ECWU1473C E2 ECWU1563C E2 ECWU1683C E3a ECWU1823C E3 ECWU1104C D1 ECWU1104V E3 ECWU1124C D3 ECWU1154C D4 ECWU1184KC Z ECWU1224KC Z ECWU1274KC Z ECWU1334KC Z ECWU1394KCV X ECWU1474KCV X ECWU1564KCV V ECWU1684KCV V ECWU1824KCV V ECWU1105KCV V Cap. tol. code Q'ty Size code E1 E2 E3a E3 D1 D2 D3 D4 D5 B Z Y X V L W H Refer to the column Rating, Dimensions & Quantity. Rated volt. 250 VDC Part No L W H Size code ECWU2102C E1 ECWU2122C E1 ECWU2155C E1 ECWU2182C E1 ECWU2222C E1 ECWU2272C E1 ECWU2332C E1 ECWU2392C E1 ECWU2472C E1 ECWU2562C E1 ECWU2682C E1 ECWU2822C E1 ECWU2103C E1 ECWU2123C E1 ECWU2153C E1 ECWU2183C E2 ECWU2223C E2 ECWU2273C E3a ECWU2333C E3 ECWU2393C D2 ECWU2473C D3 ECWU2563C D4 ECWU2683C D5 ECWU2823C B ECWU2104C B ECWU2124C B Cap. tol. code Q'ty Chip

26 Rating, Dimensions & Quantity/Reel Capacitance tolerance : ± 5 %(J) Cap. (µf) Rated volt. 630 VDC Size Code L W H ECWUC2J223JV Y ECWUC2J273JV Y ECWUC2J333JV Y Q'ty 1000 Recommened for Land Land dimensions for Size code reflow soldering A B C E1,E2,E3a,E D1,D2,D3,D4,D B Z Y X V

27 Stacked Metallized PEN Film Chip Capacitor Type: ECWU(V16) Stacked metallized PEN film dielectric with simple moldless construction Chip Features Small in size For reflow soldering RoHS directive compliant Recommended Applications DC Blocking for xdsl Explanation of Part Numbers E C W U 2 V 1 6 Product code Dielectric & construction Rated voltage Capacitance Suffix VDC V16 for xdsl,withstand voltage:400 VDC Cap.tol : ±5 % Specifications Category temp.range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions 55 C to +85 C 250 VDC µf to 0.12 µf (E12) ±5 %(J) Between terminals 400 VDC 60 s tan < =1.0 % (20 C, 1 khz) IR > =3000 MΩ (20 C, 100 VDC, 60 s) Reflow soldering : 240 C max. and 60 sec max. at more than 220 C (Temp. at cap. surface) (Please consult us for Reflow 250 C max product.) Application of this capacitor is limited to DC Blocking for xdsl, such as ADSL. Please consult us for 400 VDC rating product. Construction Dimensions in mm (not to scale) Size code E1 E2 E3a E3 D2 D3 D4 D5 B L W H Refer to the column Rating, Dimensions & Quantity.

28 Taping Specification for Automatic Mounting Refer to the page of taping specifications. Rating, Dimensions & Quantity/Reel Capacitance tolerance : ±5 %(J) Cap. (µf) Rated volt. 250 VDC Part No Size L W H code ECWU2102V E1 ECWU2122V E1 ECWU2152V E1 ECWU2182V E1 ECWU2222V E1 ECWU2272V E1 ECWU2332V E1 ECWU2392V E1 ECWU2472V E1 ECWU2562V E1 ECWU2682V E1 ECWU2822V E1 ECWU2103V E1 ECWU2123V E1 ECWU2153V E1 ECWU2183V E2 ECWU2223V E2 ECWU2273V E3a ECWU2333V E3 ECWU2393V D2 ECWU2473V D3 ECWU2563V D4 ECWU2683V D5 ECWU2823V B ECWU2104V B ECWU2124V B Q'ty Recommened for Land Land dimensions for Size code reflow soldering A B C E1, E2, E3a, E D2, D3, D4, D B It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when Recommender for Land dimensions is adopted.

29 Stacked Metallized Plastic Film Chip Capacitor Type : ECPU(A) Stacked dielectric and inner electrode with simple mold - less construction Chip Features Low ESR Max. capacitance values 1.0 µf Smallest package size in film capacitors 3225/1.0 µf For reflow soldering RoHS directive compliant Recommended Applications Noise suppressor Coupling Explanation of Part Numbers E C P U 1 C M A 5 Product code Dielectric & construction Rated voltage. Capacitance Cap.tol Suffix Suffix 1C 16 VDC 12 Tape width 5 8 mm Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) Soldering conditions - 40 C to + 85 C 16 VDC 0.10 µf to 1.0 µf (E6) ± 20 % (M) tan < = % (20 C, 1 khz) Between terminais: Rated volt (VDC)x175 % 1 s to 5 s C < =0.33 µf : IR > =1000 MΩ (20 :, 10 VDC, 60 s) C>0.33 µf : IR > =300 MΩ µf (20 :, 10 VDC, 60 s) Reflow soldering : 240 C max. and 30 sec max. at more than 220 C (Temp. at cap. surface) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Construction Dimensions in mm (not to scale) Saize code L W H e g J = > H = > 1.0 H = > 1.0 H = > 1.0 G = > 1.0

30 Taping Specification for Automatic Mounting Refer to the page of taping specifications. Rating, Dimensions & Quantity/Reel Cap. (µf). L W H Plastic Film Capacitors Size Code ECPU1C104MA J1 ECPU1C154MA H1 ECPU1C224MA H1 ECPU1C334MA H2 ECPU1C474MA H3 Quantity ECPU1C684MA H ECPU1C105MA G Recommened for Land Size Code Land dimensions for reflow soldering A B C J H H H G It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when Recommender for Land dimensions is adopted.

31 Stacked Metallized Plastic Film Capacitor Type: ECQV(L)/(M) Designed for high density insertion applications. Features Small size and large capacitance Excellent electric characteristics in non-inductive construction Wide range for automatic insertion RoHS directive compliant Recommended Applications General purpose Noise suppression for logic circuit Explanation of Part Numbers E C Q V J Stacked Metallized Film Product code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix Suffix Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) Dimensions in mm (not to scale) 1H 1J 1 50 VDC 63 VDC 100 VDC 40 C to +105 C 50 VDC, 63 VDC, 100 VDC (Derating of rated voltage by 2.5 %/ C at more than 85 C) µf to 2.2 µf ±5 %(J) tan < =1.0 % (20 C, 1 khz) Between terminals : Rated volt. (VDC) 150 % 60 s C < =0.33 µf : IR =3000 > MΩ C>0.33 µf : IR> = 1000 MΩ. µf ( ) 20 C, 50 VDC, 60 s ECQV1H, ECQV1J 20 C, 100 VDC, 60 s ECQV1 In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. L M 50 VDC 63 VDC 100 VDC Suffix Blank W A 2 3 Lead Form Straight Crimped lead Cut lead Straight taping () Crimped taping () Packaging Specifications for Bulk Package Packing quantity:100 pcs./bag

32 Taping Specifications for Automatic Insertion Taping style Refer to the page of taping specifications. Packaging Specifications Lead Spacing Type ECQV (L) ECQV (M) Rated volt. 50 VDC 63 VDC 100 VDC Cap. range (µf) to to to to to to 0.10 AD Taping style AS B C D E Packing suffix JL3 JL2 JM3 JM2 JM3 JM2 Style AD AS Lead Spacing 5.0 mm 5.0 mm See the column Rating, Dimensions & Quantity Box for packing quantity. Rating, Dimensions & Quantity/ Box or Reel Type ECQV(L) Rated voltage : 50 VDC ECQV1H103JL( ) ECQV1H123JL( ) ECQV1H153JL( ) ECQV1H183JL( ) ECQV1H223JL( ) ECQV1H273JL( ) ECQV1H333JL( ) ECQV1H393JL( ) ECQV1H473JL( ) ECQV1H563JL( ) ECQV1H683JL( ) ECQV1H823JL( ) ECQV1H104JL( ) ECQV1H124JL( ) ECQV1H154JL( ) ECQV1H184JL( ) ECQV1H224JL( ) ECQV1H274JL( ) ECQV1H334JL( ) ECQV1H394JL( ) ECQV1H474JL( ) ECQV1H564JL( ) ECQV1H684JL( ) ECQV1H824JL( ) ECQV1H105JL( ) ECQV1H125JL( ) ECQV1H155JL( ) ECQV1H185JL( ) ECQV1H225JL( ) Cap. (µf) H max. F S L max. T max. ød Straight Crimped lead Straight Crimped lead Suffix for lead crimped or taped type Style N:0.010 µf to 1.0 µf Style T:1.2 µf to 2.2 µf Min. order Q'ty Taping Bulk

33 Rating, Dimensions & Quantity/ Box or Reel Type ECQV(M) Rated voltage : 63 VDC ECQV1J103JM( ) ECQV1J123JM( ) ECQV1J153JM( ) ECQV1J183JM( ) ECQV1J223JM( ) ECQV1J273JM( ) ECQV1J333JM( ) ECQV1J393JM( ) ECQV1J473JM( ) ECQV1J563JM( ) ECQV1J683JM( ) ECQV1J823JM( ) ECQV1J104JM( ) ECQV1J124JM( ) ECQV1J154JM( ) ECQV1J184JM( ) ECQV1J224JM( ) ECQV1J274JM( ) ECQV1J334JM( ) ECQV1J394JM( ) ECQV1J474JM( ) ECQV1J564JM( ) ECQV1J684JM( ) ECQV1J824JM( ) ECQV1J105JM( ) Cap. (µf) H max. F S L max. T max. ød Straight Crimped lead Straight Crimped lead Style N: µf to 0.15 µf Style T: 0.18 µf to 1.0 µf Min. order Q'ty Taping Bulk Stacked Metallized Film Type ECQV(M) Rated voltage : 100 VDC ECQV1103JM( ) ECQV1123JM( ) ECQV1153JM( ) ECQV1183JM( ) ECQV1223JM( ) ECQV1273JM( ) ECQV1333JM( ) ECQV1393JM( ) ECQV1473JM( ) ECQV1563JM( ) ECQV1683JM( ) ECQV1823JM( ) ECQV1104JM( ) ECQV1124JM( ) ECQV1154JM( ) ECQV1184JM( ) ECQV1224JM( ) ECQV1274JM( ) ECQV1334JM( ) ECQV1394JM( ) ECQV1474JM( ) Cap. (µf) H max. F S L max. T max. ød Straight Crimped lead Straight Crimped lead Suffix for lead crimped or taped type Style N: µf to 0.10 µf Style T: 0.12 µf to 0.47 µf Min. order Q'ty Taping Bulk

34 Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical characteristics Flame retardant epoxy resin coating RoHS directive compliant Recommended Applications General purpose usage Please contact us when applications are CD, ignitor etc. Explanation of Part Numbers E C Q E F Product code Dielectric & construction Rated volt. 100 VDC 250 VDC 400 VDC 630 VDC A 2A Explanation of Part Number for Odd Size Taping 1000 VDC 1250 VDC 125 VAC 250 VAC Capacitance J K Cap. Tol. Suffix Suffix ±5 % ±10 % Suffix Blank B Z 3 6 Lead Form Straight Crimped lead Cut lead Crimped taping () Crimped taping () E C Q E R F Product code Dielectric & construction Specifications Rated volt. Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) Capacitance Suffix Cap. Tol. Suffix 100 VDC, 250 VDC,400 VDC, 630 VDC, 1000 VDC, 1250 VDC, 40 C to +105 C 125 VAC, 250 VAC 40 C to +105 C 100 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC, 1250 VDC, (Derating of rated voltage by 1.25 %/ C at more than 85 C) 125 VAC, 250 VAC µf to 10 µf (E12) ±5 %(J), ±10 %(K) tan < =1.0 % (20 C, 1 khz) Rated volt. 100 V to 630 VDC Between terminals : Rated volt.(vdc) 150 % 60 s Rated volt VDC, 1250 VDC Between terminals : Rated volt. (VDC) 175 % 2 s to 5 s or 1000 VAC 60 s Between terminals to enclosure : 1 VAC 60 s Rated volt. 125 VAC, 250 VAC Between terminals : Rated volt.(vac) 230 % 60 s Between terminals to enclosure : 1 VAC 60 s 100 V to 630 VDC: C < = 0.33 µf : IR> = 9000 MΩ (20 C, 100 VDC, 60 s) C > 0.33 µf : IR> = 3000 MΩ. µf 1000 VDC, 1250 VDC: IR> = MΩ (20 C, 100 VDC, 60 s) IR> = 2000 MΩ (20 C, VDC, 60 s) 125 VAC, 250 VAC: C < = 0.47 µf : IR> = 2000 MΩ (20 C, VDC, 60 s) C > 0.47 µf : IR> = 3000 MΩ. µf (20 C, 100 VDC, 60 s) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Voltage to be applied to ECQE1A (F) & ECQE2A (F) is only sine wave (50 Hz or 60 Hz).

35 Dimensions in mm (not to scale) Packaging Specifications for Bulk Package Packing quantity:100 pcs./bag Taping Specifications for Automatic Insertion Taping style Metallized Film Refer to the page of taping specifications. Packaging Specifications Type ECQE (F) Rated volt. 100 VDC 250 VDC 400 VDC 630 VDC 1000 VDC 1250 VDC 125 VAC 250 VAC Cap. range Taping style (µf) AD AS AB B C D E Packing suffix 0.56 to 8 ( ) F3 2 to 1.0 ( ) F3 1.2 to 3.3 ( ) F3 1.2 to 3.3 R( ) F to 0.27 ( ) F ( ) F to ( ) F to 0.33 R( ) F 0.39 to R( ) F to 0.10 ( ) F to 0.47 ( ) F to 0.10 R( ) F 0.12 to 0.47 R( ) F to ( ) F to ( ) F to 0.22 ( ) F to R( ) F to 0.22 R( ) F to 0.10 R( ) F to R( ) F to ( ) F to R( ) F to ( ) F to R( ) F to 0.22 R( ) F Lead Spacing Style AD AB B C D E Lead Spacing 5.0 mm 5.0 mm 5.0 mm 5.0 mm mm mm See the column Rating, Dimensions & Quantity Box for packing quantity.

36 Rating, Dimensions & Quantity/ Box Rated voltage : 100 VDC, Capacitance tolerance : ± 5 %(J), ±10 %(K) ECQE1564F( ) ECQE1684F( ) ECQE1824F( ) ECQE1105F( ) ECQE1125F( ) ECQE1155F( ) ECQE1185F( ) ECQE1225F( ) ECQE1275F( ) ECQE1335F( ) ECQE1395F( ) ECQE1475F( ) ECQE1565F( ) ECQE1685F( ) ECQE1825F( ) ECQE1106F( ) Rating, Dimensions & Quantity/ Box Rated voltage : 250 VDC, Capacitance tolerance : ±5 %(J), ±10 %(K) Cap. (µf) H L max. T F S G max. max. ø d Standard Straight Crimped lead Straight Crimped lead Straight 5 mm Suffix for lead crimped or taped type Cap. tol. code Suffix for lead crimped or taped type Cap. tol. code Style D: µf to 0.33 µf Style B: 0.39 µf to µf Min. order Q'ty Taping Odd size 5 mm style D: µf to 1.0 µf style B: 1.2 µf to µf Cap. (µf) H L max. T F S G max. max. Straight Crimped lead Straight Crimped lead Straight ø d ECQE2103F( ) ECQE2123F( ) ECQE2153F( ) ECQE2183F( ) ECQE2223F( ) ECQE2273F( ) ECQE2333F( ) ECQE2393F( ) ECQE2473F( ) ECQE2563F( ) ECQE2683F( ) ECQE2823F( ) ECQE2104F( ) ECQE2124F( ) ECQE2154F( ) ECQE2184F( ) ECQE2224F( ) ECQE2274F( ) ECQE2334F( ) ECQE2394F( ) ECQE2474F( ) ECQE2564F( ) ECQE2684F( ) ECQE2824F( ) ECQE2105F( ) ECQE2125F( ) ECQE2155F( ) ECQE2185F( ) ECQE2225F( ) ECQE2275F( ) ECQE2335F( ) ECQE2395F( ) ECQE2475F( ) ECQE2565F( ) ECQE2685F( ) ECQE2825F( ) ECQE2106F( ) Standard 5 mm , Odd size mm Min. order Q'ty Taping Odd size 5 mm Odd size mm Bulk Bulk

37 Rating, Dimensions & Quantity/ Box Rated voltage : 400 VDC, Capacitance tolerance : ±5 %(J), ±10 %(K) ECQE4103F( ) Cap. (µf) H L max. T max. F S G max. max. d Straight Crimped lead Straight Crimped lead Straight Standard 5 mm Min. order Q'ty Taping Odd size 5 mm Odd size mm Bulk ECQE4123F( ) ECQE4153F( ) ECQE4183F( ) ECQE4223F( ) ECQE4273F( ) ECQE4333F( ) ECQE4393F( ) ECQE4473F( ) ECQE4563F( ) ECQE4683F( ) ECQE4823F( ) ECQE4104F( ) ECQE4124F( ) ECQE4154F( ) ECQE4184F( ) ECQE4224F( ) ECQE4274F( ) Metallized Film ECQE4334F( ) ECQE4394F( ) ECQE4474F( ) ECQE4564F( ) ECQE4684F( ) ECQE4824F( ) ECQE4105F( ) ECQE4125F( ) ECQE4155F( ) ECQE4185F( ) ECQE4225F( ) Suffix for lead crimped or taped type Cap. tol. code style D:0.010 µf to 0.10 µf style B:0.12 µf to 2.2 µf

38 Rated voltage : 630 VDC, Capacitance tolerance : ±5 %(J), ±10 %(K) Cap. (µf) H L max. T F S G max. max. d Straight Crimped lead Straight Crimped lead Straight ECQE6102F( ) ECQE6122F( ) ECQE6152F( ) ECQE6182F( ) ECQE6222F( ) ECQE6272F( ) ECQE6332F( ) ECQE6392F( ) ECQE6472F( ) ECQE6562F( ) ECQE6682F( ) ECQE6822F( ) ECQE6103F( ) ECQE6123F( ) ECQE6153F( ) ECQE6183F( ) ECQE6223F( ) ECQE6273F( ) ECQE6333F( ) ECQE6393F( ) ECQE6473F( ) ECQE6563F( ) ECQE6683F( ) ECQE6823F( ) ECQE6104F( ) ECQE6124F( ) ECQE6154F( ) ECQE6184F( ) ECQE6224F( ) ECQE6274F( ) ECQE6334F( ) ECQE6394F( ) ECQE6474F( ) ECQE6564F( ) ECQE6684F( ) ECQE6824F( ) ECQE6105F( ) ECQE6125F( ) ECQE6155F( ) ECQE6185F( ) ECQE6225F( ) Suffix for lead crimped or taped type. Cap. tol. code Plastic Film Capacitors Standard 5 mm 1000 Min. order Q'ty Taping Bulk Odd size 5 mm Odd size mm style D:0.010 µf to µf style B: µf to µf, µf to 2.2 µf

39 Rating, Dimensions & Quantity/ Box Rated voltage : 1000 VDC, Note) 125 VAC, Capacitance tolerance : ±5 %(J), ±10 %(K) Plastic Film Capacitors ECQE10103F( ) ECQE10123F( ) ECQE10153F( ) ECQE10183F( ) ECQE10223F( ) ECQE10273F( ) ECQE10333F( ) ECQE10393F( ) ECQE10473F( ) ECQE10563F( ) ECQE10683F( ) ECQE10823F( ) ECQE10104F( ) ECQE10124F( ) ECQE10154F( ) ECQE10184F( ) ECQE10224F( ) Cap. (µf) H max. F S G max. L max. T max. ø d Straight Crimped lead Straight Crimped lead Straight Suffix for lead crimped or taped type. Cap. tol. code Min. order Q'ty Taping mm Style D: µf to µf Style B: µf to 0.22 µf Bulk Metallized Film Note) This type has two rated voltage, one is DC rated voltage another is AC rated voltage.. DC rated voltage is 1000 V, AC rated voltage is 125 V. Making for rated voltage is1000 V, 125 V When capacitors use in secondary side of power source, and in case of applying voltage in altering current (50 Hz or 60 Hz sine wave) to a capacitor, please refer to the page of ''Permissible voltage (R.M.S) in altering current corresponding to DC rated voltage''. When capacitors use in primary side of power source, the rated voltage is shown 125 VAC. Voltage to be applied to capacitors in only sine wave (50 Hz or 60 Hz). AC rated capacitors complying with clause 1 of ''Electrical Appliance and Material Safety Law''. And not complying with clause 2 of ''Electrical Appliance and Material Safety Law'', in this case please use ECQUL type or ECQUG type

40 Rating, Dimensions & Quantity/ Box Rated voltage : 1250 VDC, Note) 125 VAC, Capacitance tolerance : ±5 %(J), ±10 %(K) Plastic Film Capacitors ECQE12102F( ) ECQE12122F( ) ECQE12152F( ) ECQE12182F( ) ECQE12222F( ) ECQE12272F( ) ECQE12332F( ) ECQE12392F( ) ECQE12472F( ) ECQE12562F( ) ECQE12682F( ) ECQE12822F( ) ECQE12103F( ) ECQE12123F( ) ECQE12153F( ) ECQE12183F( ) ECQE12223F( ) ECQE12273F( ) ECQE12333F( ) ECQE12393F( ) ECQE12473F( ) ECQE12563F( ) ECQE12683F( ) ECQE12823F( ) ECQE12104F( ) ECQE12124F( ) ECQE12154F( ) ECQE12184F( ) ECQE12224F( ) Cap. (µf) H max. F S G max. L max. T max. ø d Straight Crimped lead Straight Crimped lead Straight Suffix for lead crimped or taped type. Cap. tol. code Style D: µf to µf Style B: µf to 0.22 µf Min. order Q'ty Taping Bulk mm 400 Note) This type has two rated voltage, one is DC rated voltage another is AC rated voltage.. DC rated voltage is 1250 V, AC rated voltage is 125 V. Making for rated voltage is1250 V, 125 V When capacitors use in secondary side of power source, and in case of applying voltage in altering current (50 Hz or 60 Hz sine wave) to a capacitor, please refer to the page of ''Permissible voltage (R.M.S) in altering current corresponding to DC rated voltage''. When capacitors use in primary side of power source, the rated voltage is shown 125 VAC. Voltage to be applied to capacitors in only sine wave (50 Hz or 60 Hz). AC rated capacitors complying with clause 1 of ''Electrical Appliance and Material Safety Law''. And not complying with clause 2 of ''Electrical Appliance and Material Safety Law'', in this case please use ECQUL type or ECQUG type

41 Rating, Dimensions & Quantity/ Box Rated voltage : 125 VAC, Capacitance tolerance : ±5 %(J), ±10 %(K) Noise suppression Capacitors (Across-the-line) Cap. (µf) H L max. T F S G max. max. d Straight Crimped lead Straight Crimped lead Straight ECQE1A103F( ) ECQE1A123F( ) ECQE1A153F( ) ECQE1A183F( ) ECQE1A223F( ) ECQE1A273F( ) ECQE1A333F( ) ECQE1A393F( ) ECQE1A473F( ) ECQE1A563F( ) ECQE1A683F( ) MF( ) Suffix for lead crimped or taped type. Cap. tol. code style D:0.010 µf to µf Notice for AC rated AC rated capacitors complying with clause 1 of ''Electrical Appliance and Material Safety Law''. As for clause 2 of ''Electrical Appliance and Material Safety Law'', please use ECQUL type or ECQUG type. Standard 5 mm 1000 Min. order Q'ty Taping Odd size 5 mm Odd size mm 1000 Bulk Metallized Film When using these capacitors as a across-the-line capacitor, it shall be required to follow either item 1. or item 2. condition. 1. Capacitor shall be connected in parallel with varistor (Specified varistor voltage in table 1.) 2. Voltage applied for capacitor shall not exceed other than specified in table 1, when using these capacitors. Table 1 Cap. Rated Voltage 125 VAC Varistor voltage 250 V Pulse voltage 250 V0 P

42 Rated voltage : 250 VAC, Capacitance tolerance : ±5 %(J), ±10 %(K) Noise suppression Capacitors (Across-the-line) ECQE2A103F( ) ECQE2A123F( ) ECQE2A153F( ) ECQE2A183F( ) ECQE2A223F( ) ECQE2A273F( ) ECQE2A333F( ) ECQE2A393F( ) ECQE2A473F( ) ECQE2A563F( ) ECQE2A683F( ) ECQE2A823F( ) ECQE2A104F( ) ECQE2A124F( ) ECQE2A154F( ) ECQE2A184F( ) ECQE2A224F( ) ECQE2A274F( ) ECQE2A334F( ) ECQE2A394F( ) ECQE2A474F( ) ECQE2A564P( )( ) ECQE2A684P( )( ) ECQE2A824P( )( ) ECQE2A105P( )( ) ECQE2A125P( )( ) ECQE2A155P( )( ) ECQE2A185P( )( ) ECQE2A225P( )( ) MF( ) Cap. (µf) L max. T max. H max. F S G max. Straight Crimped lead Straight Crimped lead Straight d Suffix for lead crimped or taped type. Cap. tol. code Plastic Film Capacitors Style D:0.010 µf to µf Style B:0.056 µf to 0.47 µf Min. order Q'ty Taping Bulk Standard 5 mm Odd size mm Please consult us about Crimed lead type of 0.56 µf to 2.2 µf. Notice for AC rated AC rated capacitors complying with clause 1 of ''Electrical Appliance and Material Safety Law''. As for clause 2 of ''Electrical Appliance and Material Safety Law'', please use ECQUL type or ECQUG type. When using these capacitors as a across-the-line capacitor, it shall be required to follow either item 1. or item 2. condition. 1. Capacitor shall be connected in parallel with varistor (Specified varistor voltage in table 1.) 2. Voltage applied for capacitor shall not exceed other than specified in table 1, when using these capacitors. Table 1 Cap. Rated Voltage 250 VAC Varistor voltage 470 V Pulse voltage 630 V0 P

43 Metallized Polyester Film Capacitor Type: ECQE(B) Non-inductive construction using metallized polyester film with flame retardant epoxy resin coating Features Small size Excellent electrical characteristics Flame retardant epoxy resin coating RoHS directive compliant Recommended Applications General purpose usage Please contact us when applications are CD, ignitor etc. Explanation of Part Numbers E C Q E B Products code Dielectric & construction Explanation of Part Numbers for Odd Size Taping Rated voltage Capacitance Cap.Tol. Suffix Suffix VDC 1A 125 VAC J ±5 % K ±10 % Suffix Blank B Z Lead Form Straight Crimped lead Cut lead Straight taping () Crimped taping () Crimped taping () Metallized Film E C Q E R B Products code Dielectric & construction Rated voltage Capacitance Suffix Cap. Tol. Suffix Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) 250 VDC 125 VAC 250 VDC, 125 VAC (250 VDC : Derating of rated voltage by 1.25 %/ C at more than 85 C) µf to 4.7 µf ±5 %(J), ±10 %(K) tan < =1.0 % (20 C, 1 khz) Rated volt. 250 VDC Between terminals : Rated vol. (VDC) 150 % 60 s Rated volt. 125 VAC Between terminals : Rated volt. (VAC) 230 % 60 s Between terminals to enclosure:1 VAC 60 s 250 VDC 40 C to +105 C 40 C to +105 C C < =0.33 µf : IR > =9000 MΩ (20 C, 100 VDC, 60 s) C>0.33 µf : IR > =3000 MΩ. µf (20 C, 100 VDC, 60 s) C 125 VAC < =0.47 µf : IR =2000 > MΩ (20 C, VDC, 60 s) C>0.47 µf : IR =3000 > MΩ. µf (20 C, 100 VDC, 60 s) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Voltage to be applied to ECQE1A (B) is only sine wave (50 Hz or 60 Hz).

44 Dimensions in mm (not to scale) Packaging Specifications for Bulk Package Packing quantity : 100 pcs./bag Taping Specifications for Automatic Insertion Taping style Style AS P H1 H 1 MAX F P0 Refer to the page of taping specifications. Packaging Specifications Lead Spacing Type ECQE(B) Rated volt. 250 VDC 125 VAC Cap. range (µf) to to 8 2 to 0.18 to 8 2 to to to to to 8 2 to 2.7 Taping style AD AS AB B C D E Packing suffix ( ) B2 ( ) B3 ( ) B3 R( ) B R( ) B ( ) B2 ( ) B6 ( ) B3 R( ) B R( ) B Style AD AS AB C D E Lead Spacing 5.0 mm 5.0 mm 5.0 mm 5.0 mm mm mm See the column Rating, Dimensions & Quantity Box for packing quantity.

45 Rating, Dimensions & Quantity/ Box Rated voltage: 250 VDC, Capacitance tolerance: ±5 %(J), ±10 %(K) Cap. (µf) H max. F S L max. T max. Straight Crimped lead Straight Crimped lead ø d ECQE2103B( ) ECQE2123B( ) ECQE2153B( ) ECQE2183B( ) ECQE2223B( ) ECQE2273B( ) ECQE2333B( ) ECQE2393B( ) ECQE2473B( ) ECQE2563B( ) ECQE2683B( ) ECQE2823B( ) ECQE2104B( ) ECQE2124B( ) ECQE2154B( ) ECQE2184B( ) ECQE2224B( ) ECQE2274B( ) ECQE2334B( ) ECQE2394B( ) ECQE2474B( ) ECQE2564B( ) ECQE2684B( ) ECQE2824B( ) ECQE2105B( ) ECQE2125B( ) ECQE2155B( ) ECQE2185B( ) ECQE2225B( ) ECQE2275B( ) ECQE2335B( ) ECQE2395B( ) ECQE2475B( ) Suffix for lead crimped or taped type Cap. tol. code Standard 5 mm Min. order Q'ty Taping Odd size 5 mm Style D: µf to 8 µf Style B: 2 µf to 4.7 µf Odd size mm Bulk Metallized Film

46 Rating, Dimensions & Quantity/ Box Rated voltage : 125 VAC Capacitance tolerance : ±5 %(J), ±10 %(K) Cap. (µf) H L max. T F S max. Straight Crimped lead Straight Crimped lead ø d ECQE1A103B( ) ECQE1A123B( ) ECQE1A153B( ) ECQE1A183B( ) ECQE1A223B( ) ECQE1A273B( ) ECQE1A333B( ) ECQE1A393B( ) ECQE1A473B( ) ECQE1A563B( ) ECQE1A683B( ) ECQE1A823B( ) ECQE1A104B( ) ECQE1A124B( ) ECQE1A154B( ) ECQE1A184B( ) ECQE1A224B( ) ECQE1A274B( ) ECQE1A334B( ) ECQE1A394B( ) ECQE1A474B( ) ECQE1A564B( ) ECQE1A684B( ) ECQE1A824B( ) ECQE1A105B( ) ECQE1A125B( ) ECQE1A155B( ) ECQE1A185B( ) ECQE1A225B( ) ECQE1A275B( ) ECQE1A335B( ) ECQE1A395B( ) ECQE1A475B( ) Suffix for lead crimped or taped type. Cap. tol. code Standard 5 mm Min. order Q'ty Taping Odd size 5 mm Style D: µf to 8 µf Style B: 2 µf to 4.7 µf Odd size mm Bulk Notice for AC rated AC rated capacitors complying with clause 1 of ''Electrical Appliance and Material Safety Law''. As for clause 2 of ''Electrical Appliance and Material Safety Law'', please use ECQUL type or ECQUG type. When using these capacitors as a across-the-line capacitor, it shall be required to follow either item 1. or item 2. condition. 1. Capacitor shall be connected in parallel with varistor (Specified varistor voltage in table 1.) 2. Voltage applied for capacitor shall not exceed other than specified in table 1, when using these capacitors. Table 1 Cap. Rated Voltage 125 VAC Varistor voltage 250 V Pulse voltage 250 V0 P

47 Metallized Polyester Film Capacitor Type: ECQE(T) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical characteristics Flame retardant epoxy resin coating Moisture resistance 85 C, 85 % RH for hours RoHS directive compliant Recommended Applications General purpose usage Explanation of Part Numbers E C Q E T Product code Dielectric & construction Rated volt. 250 VDC 400 VDC 630 VDC 1A 2A Explanation of Part Number for Odd Size Taping 125 VAC 250 VAC Capacitance J K Cap. Tol. Suffix Suffix ±5 % ±10 % Suffix Blank B Z 3 6 Lead Form Straight Crimped lead Cut lead Crimped taping () Crimped taping () Metallized Film E C Q E R T Product code Dielectric & construction Rated volt. Capacitance Suffix Cap. Tol. Suffix Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) 250 VDC,400 VDC, 630 VDC 40 C to +105 C 125 VAC, 250 VAC 40 C to +105 C 250 VDC, 400 VDC, 630 VDC (Derating of rated voltage by 1.25 %/ C at more than 85 C) 125 VAC, 250 VAC µf to 10 µf (E12) ±5 %(J), ±10 %(K) tan < =1.0 % (20 C, 1 khz) Rated volt. 250 VDC to 630 VDC Between terminals : Rated volt.(vdc) 150 % 60 s Rated volt. 125 VAC, 250 VAC Between terminals : Rated volt.(vac) 230 % 60 s Between terminals to enclosure : 1 VAC 60 s 250 VDC to 630 VDC: C0.33 µfir9000 M (20 C, 100VDC, 60 s) C0.33 µfir3000 MµF 125 VAC, 250 VAC: IR> = 2000 MΩ (20 C, VDC, 60 s) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Voltage to be applied to ECQE1A (T) & ECQE2A (T) is only sine wave (50 Hz or 60 Hz).

48 Dimensions in mm (not to scale) Packaging Specifications for Bulk Package Packing quantity:100 pcs./bag Taping Specifications for Automatic Insertion Taping style Refer to the page of taping specifications. Packaging Specifications Lead Spacing Type ECQE(T) Rated volt. 250 VDC 400 VDC 630 VDC 125 VAC 250 VAC Cap. range (µf) to to to to to to to to to to to to to to to to to to to to to to to 0.22 Taping style AD AB C D E Packing suffix ( ) T3 ( ) T3 ( ) T3 R( ) T R( ) T ( ) T3 ( ) T3 ( ) T3 R( ) T R( ) T ( ) T3 ( ) T3 R( ) T R( ) T ( ) T3 ( ) T6 ( ) T6 R( ) T R( ) T ( ) T3 ( ) T6 R( ) T R( ) T Style AD AB C D E Lead Spacing 5.0 mm 5.0 mm 5.0 mm mm mm See the column Rating, Dimensions & Quantity Box for packing quantity.

49 Rating, Dimensions & Quantity/ Box Rated voltage : 250 VDC, Capacitance tolerance : ±5 %(J), ±10 %(K) Cap. (µf) L max. T max. H max. F S G max. Straight Crimped lead Straight Crimped lead Straight d ECQE2103T( ) ECQE2123T( ) ECQE2153T( ) ECQE2183T( ) ECQE2223T( ) ECQE2273T( ) ECQE2333T( ) ECQE2393T( ) ECQE2473T( ) ECQE2563T( ) ECQE2683T( ) ECQE2823T( ) ECQE2104T( ) ECQE2124T( ) ECQE2154T( ) ECQE2184T( ) ECQE2224T( ) ECQE2274T( ) ECQE2334T( ) ECQE2394T( ) ECQE2474T( ) ECQE2564T( ) ECQE2684T( ) ECQE2824T( ) ECQE2105T( ) ECQE2125T( ) ECQE2155T( ) ECQE2185T( ) ECQE2225T( ) ECQE2275T( ) ECQE2335T( ) ECQE2395T( ) ECQE2475T( ) ECQE2565T( ) ECQE2685T( ) ECQE2825T( ) ECQE2106T( ) Suffix for lead crimped or taped type Cap. tol. code Standard 5 mm style D:0.010 µf to 0.33 µf style B:0.39 µf to µf Min. order Q'ty Taping Bulk Odd size 5 mm Odd size mm Metallized Film

50 Rating, Dimensions & Quantity/ Box Rated voltage : 400 VDC, Capacitance tolerance : ±5 %(J), ±10 %(K) ECQE4103T( ) ECQE4123T( ) ECQE4153T( ) ECQE4183T( ) ECQE4223T( ) ECQE4273T( ) ECQE4333T( ) ECQE4393T( ) ECQE4473T( ) ECQE4563T( ) ECQE4683T( ) ECQE4823T( ) ECQE4104T( ) ECQE4124T( ) ECQE4154T( ) ECQE4184T( ) ECQE4224T( ) ECQE4274T( ) ECQE4334T( ) ECQE4394T( ) ECQE4474T( ) ECQE4564T( ) ECQE4684T( ) ECQE4824T( ) ECQE4105T( ) ECQE4125T( ) ECQE4155T( ) ECQE4185T( ) ECQE4225T( ) Cap. (µf) H L max. T F S G max. max. d Standard Straight Crimped lead Straight Crimped lead Straight 5 mm Suffix for lead crimped or taped type. Cap. tol. code Plastic Film Capacitors style D:0.010 µf to 0.10 µf style B:0.12 µf to 2.2 µf Rated voltage : 630 VDC, Capacitance tolerance : ±5 %(J), ±10 %(K) Cap. (µf) H L max T F S G max. max d Straight Crimped lead Straight Crimped lead Straight ECQE6103T( ) ECQE6123T( ) ECQE6153T( ) ECQE6183T( ) ECQE6223T( ) ECQE6273T( ) ECQE6333T( ) ECQE6393T( ) ECQE6473T( ) ECQE6563T( ) ECQE6683T( ) ECQE6823T( ) ECQE6104T( ) ECQE6124T( ) ECQE6154T( ) ECQE6184T( ) ECQE6224T( ) ECQE6274T( ) ECQE6334T( ) ECQE6394T( ) ECQE6474T( ) ECQE6564T( ) ECQE6684T( ) ECQE6824T( ) ECQE6105T( ) ECQE6125T( ) ECQE6155T( ) ECQE6185T( ) ECQE6225T( ) style D:0.010 µf to µf style B:0.056 µf to 2.2 µf Min. order Q'ty Taping Odd size Odd size Bulk 5 mm mm Min. order Q'ty Taping Bulk Odd size 5 mm Odd size mm

51 Rating, Dimensions & Quantity/ Box Rated voltage : 125 VAC, Capacitance tolerance : ±5 %(J), ±10 %(K) Noise suppression Capacitors (Across-the-line) ECQE1A103T( ) ECQE1A123T( ) ECQE1A153T( ) ECQE1A183T( ) ECQE1A223T( ) ECQE1A273T( ) ECQE1A333T( ) ECQE1A393T( ) ECQE1A473T( ) ECQE1A563T( ) ECQE1A683T( ) ECQE1A823T( ) ECQE1A104T( ) ECQE1A124T( ) ECQE1A154T( ) ECQE1A184T( ) ECQE1A224T( ) ECQE1A274T( ) ECQE1A334T( ) ECQE1A394T( ) ECQE1A474T( ) Rated voltage : 250 VAC, Capacitance tolerance : ±5 %(J), ±10 %(K) Noise suppression Capacitors (Across-the-line) ECQE2A103T( ) ECQE2A123T( ) ECQE2A153T( ) ECQE2A183T( ) ECQE2A223T( ) ECQE2A273T( ) ECQE2A333T( ) ECQE2A393T( ) ECQE2A473T( ) ECQE2A563T( ) ECQE2A683T( ) ECQE2A823T( ) ECQE2A104T( ) ECQE2A124T( ) ECQE2A154T( ) ECQE2A184T( ) ECQE2A224T( ) ECQE2A274T( ) ECQE2A334T( ) ECQE2A394T( ) ECQE2A474T( ) Cap. (µf) H L max. T F S G max. max. d Standard Straight Crimped lead Straight Crimped lead Straight 5 mm Suffix for lead crimped or taped type. Cap. tol. code Table 1 Cap. Rated Voltage 125 VAC 250 VAC style D:0.010 µf to 0.22 µf style B:0.27 µf to 0.47 µf Cap. (µf) H L max. T F S G max. max. d Straight Crimped lead Straight Crimped lead Straight Style D:0.010 µf to µf Style B:0.056 µf to 0.47 µf Notice for AC rated AC rated capacitors complying with clause 1 of ''Electrical Appliance and Material Safety Law''. As for clause 2 of ''Electrical Appliance and Material Safety Law'', please use ECQUL type or ECQUG type. When using these capacitors as a across-the-line capacitor, it shall be required to follow either item 1. or item 2. condition. 1. Capacitor shall be connected in parallel with varistor (Specified varistor voltage in table 1.) 2. Voltage applied for capacitor shall not exceed other than specified in table 1, when using these capacitors. Varistor voltage 250 V 470 V Pulse voltage 250 V0 P 630 V0 P Min. order Q'ty Taping Bulk Odd size 5 mm Odd size mm Min. order Q'ty Taping Bulk Odd size 5 mm Odd size mm Metallized Film

52 Metallized Polypropylene Film Capacitor Type: ECWF(L) Designed for high frequency and current applications. Features Small size Excellent frequency characteristics Low loss 85 C, 85 % RH, W.V. 1.0 for hours RoHS directive compliant Recommended Applications Lighting High frequency and high current circuits (TVs, Monitors, Power Supplies, etc.) Explanation of Part Numbers E C W F L Products code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix Suffix VDC VDC Explanation of Part Numbers for Odd Size Taping H ±3 % J ±5 % Suffix Blank B C Lead Form Straight Crimped lead Cut lead E C W F R L Products code Dielectric & construction Rated voltage Capacitance Suffix Cap. Tol. Suffix Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) 40 C to +105 C 400 VDC, 630 VDC 400 VDC uf to 2.4 uf 630 VDC uf to 1.3 uf ±3 %(H), ±5 %(J) Between terminals : Rated voltage(vdc) 150 % 60 s tan < =0.05% (20 C,1kHz) tan < =0.20% (20 C,10kHz) C < =0.33 uf : IR> = 9000 MΩ (20 C, 100 VDC, 60 s for 400 VDC) Insulation resistance (IR) C>0.33 uf : IR> = 3000 MΩuF (20 C, VDC, 60 s for 630 VDC) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.

53 Dimensions in mm (not to scale) Packaging Specification for Bulk Package Packing quantity: 100 pcs./bag Taping Specifications for Automatic Insertion Taping style Metallized Film Refer to the page of taping specifications. Packaging Specifications Type ECWF(L) Rated volt. 400 VDC 630 VDC Cap. range (µf) to to to to 0.43 Taping style AD AS B C D E Packing suffix R( ) L R( ) L R( ) L R( ) L Lead Spacing Style D E Lead Spacing mm mm

54 Rating, Dimensions& Quantity/ Box Type ECWF(L) Rated voltage : 400 VDC ECWF4223ML( ) ECWF4243ML( ) ECWF4273ML( ) ECWF4303ML( ) ECWF4333ML( ) ECWF4363ML( ) ECWF4393ML( ) ECWF4433ML( ) ECWF4473ML( ) ECWF4513ML( ) ECWF4563ML( ) ECWF4623ML( ) ECWF4683ML( ) ECWF4753ML( ) ECWF4823ML( ) ECWF4913ML( ) ECWF4104ML( ) ECWF4114ML( ) ECWF4124ML( ) ECWF4134ML( ) ECWF4154ML( ) ECWF4164ML( ) ECWF4184ML( ) ECWF4204ML( ) ECWF4224ML( ) ECWF4244ML( ) ECWF4274ML( ) ECWF4304ML( ) ECWF4334ML( ) ECWF4364ML( ) ECWF4394ML( ) ECWF4434ML( ) ECWF4474ML( ) ECWF4514ML( ) ECWF4564ML( ) ECWF4624ML( ) ECWF4684ML( ) ECWF4754ML( ) ECWF4824ML( ) ECWF4914ML( ) ECWF4105ML( ) ECWF4115ML( ) ECWF4125ML( ) ECWF4135ML( ) ECWF4155ML( ) ECWF4165ML( ) ECWF4185ML( ) ECWF4205ML( ) ECWF4225ML( ) ECWF4245ML( ) Cap. (µf) H max F L max T max Straight Crimped lead Straight Suffix for lead crimped Capacitance tolerance code S Crimped lead ød Min. order Q'ty Taping Bulk mm

55 Rating, Dimensions& Quantity/ Box Type ECWF(L) Rated voltage : 630 VDC ECWF6103ML( ) ECWF6113ML( ) ECWF6123ML( ) ECWF6133ML( ) ECWF6153ML( ) ECWF6163ML( ) ECWF6183ML( ) ECWF6203ML( ) ECWF6223ML( ) ECWF6243ML( ) ECWF6273ML( ) ECWF6303ML( ) ECWF6333ML( ) ECWF6363ML( ) ECWF6393ML( ) ECWF6433ML( ) ECWF6473ML( ) ECWF6513ML( ) ECWF6563ML( ) ECWF6623ML( ) ECWF6683ML( ) ECWF6753ML( ) ECWF6823ML( ) ECWF6913ML( ) ECWF6104ML( ) ECWF6114ML( ) ECWF6124ML( ) ECWF6134ML( ) ECWF6154ML( ) ECWF6164ML( ) ECWF6184ML( ) ECWF6204ML( ) ECWF6224ML( ) ECWF6244ML( ) ECWF6274ML( ) ECWF6304ML( ) ECWF6334ML( ) ECWF6364ML( ) ECWF6394ML( ) ECWF6434ML( ) ECWF6474ML( ) ECWF6514ML( ) ECWF6564ML( ) ECWF6624ML( ) ECWF6684ML( ) ECWF6754ML( ) ECWF6824ML( ) ECWF6914ML( ) ECWF6105ML( ) ECWF6115ML( ) ECWF6125ML( ) ECWF6135ML( ) Cap. (µf) H max F L max T max Straight Crimped lead Straight Suffix for lead crimped Capacitance tolerance code S Crimped lead ød Min. order Q'ty Taping Bulk mm Metallized Film

56 Metallized Polypropylene Film Capacitors Type: ECWF(A) Designed for high frequency and current applications. Features Small size Excellent frequency characteristics Low loss Low Hum Sound Noise 85 degree C, 85%RH, VDC, hours (630VDC) RoHS directive compliant Recommended Applications 250VDC,630VDC:High frequency and high current circuits 450VDC:Active filter circuits Explanation of Part Numbers 250VDC,450VDC (Bulk) E C W F A Products code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix Suffix 2 2W 250 VDC 450 VDC H J J K ±3 % ±5 % ±5 % ±10 % Suffix Blank B Q C Lead form Straight Crimped Lead Crimped Lead Cut lead 250VDC,450VDC (Odd Size Taping) E C W F R A Products code Dielectric & construction Rated voltage Capacitance Suffix Cap. Tol. Suffix 630VDC (Bulk, Odd Size Taping) E C W F A 2 J J Products code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix 2J 630 VDC J ±5 % Suffix Blank B Q C 4 Lead form Straight Crimped Lead Crimped Lead Cut lead Odd size taping

57 Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) 40 C to +105 C 250 VDC 450 VDC (Derating of rated voltage by 1.25%/ C at more than 85 C) Peak to peak voltage applied on the capacitor should be less than 240Vp-p, and zero to peak voltage should be less than 450V. 630 VDC (Derating of rated voltage by 1.0%/ C at more than 85 C) 250 VDC 450 VDC 630 VDC 250 VDC 450 VDC 630 VDC 0.1 µf to 6.8 µf 0.1 µf to 4.7 µf 0.1 µf to 2.2 µf ±3 %(H), ±5 %(J) ±5 %(J), ±10 %(K) ±5 %(J) Between terminals:rated voltage (VDC)150 % 60 s tan0.1 % (20 C,1 khz) C0.33 µf :IR9,000 MΩ 250 VDC (20 C, 100 VDC, 60 s) C0.33 µf :IR3,000 MΩµF C0.33 µf :IR30,000 MΩ 450 VDC (20 C, 100 VDC, 60 s) C0.33 µf :IR10,000 MΩµF C0.33 µf :IR9,000 MΩ 630 VDC (20 C, VDC, 60 s) C0.33 µf :IR3,000 MΩµF In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Dimensions in mm (not to scale) (Dimensions : mm) Metallized Film Packaging Specification for Bulk Package Packing quantity: 100 pcs./bag

58 Taping Specifications for Automatic Insertion Taping style Style E Style F Refer to the page of taping specifications. Packaging Specifications Type ECWF(A) Rated voltage. 250 VDC 450 VDC 630 VDC Cap. range (µf) 0.10 to to to to to 8 Taping style AD AS B C D E F Packing suffix R( ) A J4 Lead Spacing Style D E F Lead Spacing mm mm mm Rating, Dimensions& Quantity/ Box Type ECWF(A) Rated voltage : 250 VDC ECWF2104A( ) ECWF2124A( ) ECWF2154A( ) ECWF2184A( ) ECWF2224A( ) ECWF2274A( ) ECWF2334A( ) ECWF2394A( ) ECWF2474A( ) ECWF2564A( ) ECWF2684A( ) ECWF2824A( ) ECWF2105A( ) ECWF2125A( ) ECWF2155A( ) ECWF2185A( ) ECWF2225A( ) ECWF2275A( ) ECWF2335A( ) ECWF2395A( ) ECWF2475A( ) ECWF2565A( ) ECWF2685A( ) Cap. (µf) L max T max Straight Suffix for lead crimped Capacitance tolerance code H max. F S G max. Crimped lead Crimped lead Crimped lead Crimped lead ød Straight Straight (Suffix B) (Suffix Q) (Suffix B) (Suffix Q) Min. order Q'ty Taping mm Bulk

59 Rating, Dimensions& Quantity/ Box Type ECWF(A) Rated voltage : 450 VDC ECWF2W104A( ) ECWF2W124A( ) ECWF2W154A( ) ECWF2W184A( ) ECWF2W224A( ) ECWF2W274A( ) ECWF2W334A( ) ECWF2W394A( ) ECWF2W474A( ) ECWF2W564A( ) ECWF2W684A( ) ECWF2W824A( ) ECWF2W105A( ) ECWF2W125A( ) ECWF2W155A( ) ECWF2W185A( ) ECWF2W225A( ) ECWF2W275A( ) ECWF2W335A( ) ECWF2W395A( ) ECWF2W475A( ) Cap. (µf) L max T max Straight Suffix for lead crimped Capacitance tolerance code H max. Crimped lead (Suffix B) Crimped lead (Suffix Q) F S Crimped lead (Suffix B) Crimped lead (Suffix Q) G max. ød Min. order Q'ty Taping Bulk mm Type ECWF(A) Rated voltage : 630 VDC ECWFA2J104J( ) ECWFA2J124J( ) ECWFA2J154J( ) ECWFA2J184J( ) ECWFA2J224J( ) ECWFA2J274J( ) ECWFA2J334J( ) ECWFA2J394J( ) ECWFA2J474J( ) ECWFA2J564J( ) ECWFA2J684J( ) ECWFA2J824J( ) ECWFA2J105J( ) ECWFA2J125J( ) ECWFA2J155J( ) ECWFA2J185J( ) ECWFA2J225J( ) Cap. (µf) L max T max Straight Suffix for lead crimped H max. Crimped lead (Suffix B) Crimped lead (Suffix Q) F S Crimped lead (Suffix B) Crimped lead (Suffix Q) G max. ød Taping Bulk mm Straight Min. order Q'ty Bulk Crim ped lead

60 Metallized Polypropylene Film Capacitor Type : ECWFD Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent frequency characteristics Low loss Flame-retardant epoxy resin coating Low Hum Sound Noise RoHS directive compliant Recommended Applications Activ filter circuits High frequency and high current circuits Explanation of Part Numbers Standard Product E C W F D Product code Specifications Dielectric & construction 2W Rated vol. Capacitance Cap. Tol. Suffix 450 VDC Short Lead Space Product (0.47 µf,8 µf,1.0 µf) J ±5 % K ±10 % E C W F D Product code Dielectric & construction 2W Rated vol. Capacitance Suffix 1 Suffix VDC Category temp. range 40 to 110 (Including temperature-rise on unit surface) 450 VDC (Derating of rated voltage by 2%/ C at more than 85 C Rated voltage Peak to peak voltage applied on the capacitor should be less than 240Vp-p, and zero to peak voltage should be less than 450V. Capacitance range 0.1 µf to 4.7 µf Capacitance tolerance 5 %(J), 10 %(K) Withstand voltage Between terminals:rated voltage (VDC)150 % 60 s Dissipation factor (tan ) tan0.1 % (20 C,1 khz) Insulation resistance (IR) C0.33 µf:irm (20,100 VDC,60 s) C0.33 µf:irmµf In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Suffix P Q Cap. Tol Suffix Blank B Q C 3 4 Suffix 1 B Q C 3 4 Lead Form Straight Crimped lead Crimped lead Cut lead Crimped taping () Odd size taping Lead Form Straight Crimped lead Crimped lead Cut lead Crimped taping () Odd size taping

61 Dimensions in mm (not to scale) (Dimensions : mm) Packaging Specification for Bulk Package Packing quantity: 100 pcs./bag Taping Specifications for Automatic Insertion Taping style Style AB Style E Style F Packaging Specifications ECWFD 450 VDC Refer to the page of taping specifications. (μf) AD AS AB B C D E F 0.10 to , 8, P3/Q to , 8, P4/Q to Lead Spacing AB 5.0 mm E mm F mm

62 Rating, Dimensions& Quantity/ Box Type ECWFD Rated voltage : 450 VDC Cap. (μf) L max T max Straight H max. Crimped lead (Suffix B) Crimped lead (Suffix Q) Crimped lead (Suffix B) Crimped lead (Suffix Q) Min. order Q'ty Taping Bulk Crimped 5.0mm mm Straight lead ECWFD2W104( ) ECWFD2W124( ) ECWFD2W154( ) ECWFD2W184( ) ECWFD2W224( ) ECWFD2W274( ) ECWFD2W334( ) ECWFD2W394( ) ECWFD2W474 P ( ) ECWFD2W474Q ( ) ECWFD2W474( ) ECWFD2W564( ) ECWFD2W684 P ( ) ECWFD2W684Q ( ) ECWFD2W684( ) ECWFD2W824( ) ECWFD2W105 P ( ) ECWFD2W105Q ( ) ECWFD2W105( ) ECWFD2W125( ) ECWFD2W155( ) ECWFD2W185( ) ECWFD2W225( ) ECWFD2W275( ) ECWFD2W335( ) ECWFD2W395( ) ECWFD2W475( ) Suffix for lead crimped Capacitance tolerance code F S G max. d Note) Part Number marked with is Short Lead Space Product.

63 Metallized Polypropylene Film Capacitor Type : ECWH(V) Designed for high frequency and pluse applications. Features Low-loss and inherent tempereature rise Excellent electrical characteristics Flame-retardant epoxy resin coating RoHS directive compliant Recommended Applications TV, Monitors, Electronic ballast Explanation of Part Numbers E C W H V Product code Dielectric & construction Rated vol VDC VDC VDC VDC Capacitance Cap. Tol. Suffix Suffix H ±3 % J ±5 % Suffix Blank B C Lead Form Straight Crimped lead Cut lead Metallized Film Explanation of Part Number for Odd Size Taping E C W H R V Product code Dielectric & construction Rated vol. Capacitance mm Cap. Tol. Suffix Crimped Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) 40 C to +105 C 1000 VDC, 1250 VDC (1000 Vp-p), 1600 VDC (1200 Vp-p), 2000 VDC (1 Vp-p) (Derating of rated voltage by 1.25 %/ C at more than 85 C) 1000 VDC µf to 0.10 µf 1250 VDC µf to 0.10 µf 1600 VDC µf to µf 2000 VDC µf to µf ±3 %(H), ±5 %(J) tan < =0.1 % (20 C, 1 khz), tan < =0.2 % (20 C, 10 khz) Between terminals:rated volt. (VDC) 150 % 60 s Between terminals to enclosure:1 VAC 60 s IR > =30000 MΩ (20 C, VDC, 60 s) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage.

64 Dimensions in mm (not to scale) Packaging Specifications for Bulk Package Packing quantity : 100 pcs./bag Taping Specifications for Automatic Insertion Taping style Refer to the page of taping specifications. Packaging Specifications Type ECWH(V) Rated volt VDC 1250 VDC 1600 VDC 2000 VDC Cap. range (µf) to to to to Taping style AD AS B C D E See the column Rating, Dimensions & Quantity Box for packing quantity. Packing suffix R( ) V R( ) V R( ) V R( ) V Lead Spacing Style E Lead Spacing mm

65 Rating & Dimensions Rated voltage : 1000 VDC. Capacitance tolerance : ±3 %(H), ±5 %(J) Cap. (µf) L max ECWH10752V( ) ECWH10822V( ) ECWH10912V( ) ECWH10103V( ) ECWH10113V( ) ECWH10123V( ) ECWH10133V( ) ECWH10153V( ) ECWH10163V( ) ECWH10183V( ) ECWH10203V( ) ECWH10223V( ) ECWH10243V( ) ECWH10273V( ) ECWH10303V( ) ECWH10333V( ) ECWH10363V( ) ECWH10393V( ) ECWH10433V( ) ECWH10473V( ) ECWH10513V( ) ECWH10563V( ) ECWH10623V( ) ECWH10683V( ) ECWH10753V( ) ECWH10823V( ) ECWH10913V( ) ECWH10104V( ) Suffix for lead crimped Cap. tol. code T max H max. F Straight Crimped lead Straight S Crimped lead ød Min. order Q'ty Taping Bulk mm Metallized Film

66 Rating & Dimensions Rated voltage : 1250 VDC Capacitance tolerance : ±3 %(H), ±5 %(J) ECWH12362V( ) ECWH12392V( ) ECWH12432V( ) ECWH12472V( ) ECWH12512V( ) ECWH12562V( ) ECWH12622V( ) ECWH12682V( ) ECWH12752V( ) ECWH12822V( ) ECWH12912V( ) ECWH12103V( ) ECWH12113V( ) ECWH12123V( ) ECWH12133V( ) ECWH12153V( ) ECWH12163V( ) ECWH12183V( ) ECWH12203V( ) ECWH12223V( ) ECWH12243V( ) ECWH12273V( ) ECWH12303V( ) ECWH12333V( ) ECWH12363V( ) ECWH12393V( ) ECWH12433V( ) ECWH12473V( ) ECWH12513V( ) ECWH12563V( ) ECWH12623V( ) ECWH12683V( ) ECWH12753V( ) ECWH12823V( ) ECWH12913V( ) ECWH12104V( ) Cap. (µf) L max Suffix for lead crimped Cap. tol. code T max H max. F Straight Crimped lead Straight S Crimped lead ød Min. order Q'ty Taping Bulk mm

67 Rating & Dimensions Rated voltage : 1600 VDC Capacitance tolerance : ±3 %(H), ±5 %(J) ECWH16132V( ) ECWH16152V( ) ECWH16162V( ) ECWH16182V( ) ECWH16202V( ) ECWH16222V( ) ECWH16242V( ) ECWH16272V( ) ECWH16302V( ) ECWH16332V( ) ECWH16362V( ) ECWH16392V( ) ECWH16432V( ) ECWH16472V( ) ECWH16512V( ) ECWH16562V( ) ECWH16622V( ) ECWH16682V( ) ECWH16752V( ) ECWH16822V( ) ECWH16912V( ) ECWH16103V( ) ECWH16113V( ) ECWH16123V( ) ECWH16133V( ) ECWH16153V( ) ECWH16163V( ) ECWH16183V( ) ECWH16203V( ) ECWH16223V( ) ECWH16243V( ) ECWH16273V( ) ECWH16303V( ) ECWH16333V( ) ECWH16363V( ) ECWH16393V( ) ECWH16433V( ) ECWH16473V( ) ECWH16513V( ) ECWH16563V( ) Cap. (µf) L max Suffix for lead crimped Cap. tol. code T max H max. F Straight Crimped lead Straight S Crimped lead ød Min. order Q'ty Taping Bulk mm Metallized Film

68 Rating & Dimensions Rated voltage : 2000 VDC Capacitance tolerance : ±3 %(H), ±5 %(J) Cap. (µf) L max ECWH20102V( ) ECWH20112V( ) ECWH20122V( ) ECWH20132V( ) ECWH20152V( ) ECWH20162V( ) ECWH20182V( ) ECWH20202V( ) ECWH20222V( ) ECWH20242V( ) ECWH20272V( ) ECWH20302V( ) ECWH20332V( ) ECWH20362V( ) ECWH20392V( ) ECWH20432V( ) ECWH20472V( ) ECWH20512V( ) ECWH20562V( ) ECWH20622V( ) ECWH20682V( ) ECWH20752V( ) ECWH20822V( ) ECWH20912V( ) ECWH20103V( ) ECWH20113V( ) ECWH20123V( ) ECWH20133V( ) ECWH20153V( ) Suffix for lead crimped Cap. tol. code T max Dimensions H max. F Straight Crimped lead Straight S Crimped lead ød Min. order Q'ty Taping mm Bulk

69 Metallized Polypropylene Film Capacitors Type: ECWH(A) Designed for high frequency and pluse applications. Features Small size Excellent electrical characteristics Low loss Low Hum Sound Noise Flame-retardant epoxy resin coating RoHS directive compliant Recommended Applications Resonant circuit, Electronic ballast Explanation of Part Numbers Explanation of Part Numbers (Rated voltage 800 VDC) E C W H 8 H Product code Dielectric & Rated voltage construction Capacitance Cap. Tol. A Suffix 8 800VDC H ±3 % Suffix Blank B Q C Suffix Lead Form Straight Crimped lead Crimped lead Cut lead Metallized Film Explanation of Part Numbers for Odd Size Taping (Rated voltage 800 VDC) E C W H 8 R H A Product code Dielectric & Rated voltage construction Capacitance Suffix Cap.tol Suffix Explanation of Part Numbers (Rated voltage 1600 VDC) E C W H A 3 C Product code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix 3C 1600VDC H ±3 % J ±5 % Suffix Blank B Q C 4 Lead Form Straight Crimped lead Crimped lead Cut lead Odd size taping

70 Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) 40 C to+105 C 800 VDC 1600 VDC µf to µf µf to µf ±3 % (H) ±3 % (H),±5 % (J) tan < =0.1 % (20 C, 1kHz) Between terminals : Rated volt. (VDC)150 % 60 s IR =30000 > MΩ (20 C, VDC, 60 s) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Dimensions in mm (not to scale) Packaging Specifications for Bulk Package Packing quantity : 100 pcs./bag Taping Specifications for Automatic Insertion Taping style Refer to the page of taping specifications. Packaging Specifications Lead Spacing Type ECWH(A) ECWHA Rated volt VDC 1600 VDC Cap. range (µf) to to Taping style AD AS B C D E Packing Suffix RHA ( )4 Style E Lead Spacing mm Rating & Dimensions & Quantity / Box Rated voltage : 800 VDC, Capacitance tolerance : ±3 %(H) Cap. H max. F S (µf) L max T max Crimped lead Crimped lead Crimped lead Crimped lead Straight (Suffix B) (Suffix Q) Straight (Suffix B) (Suffix Q) ECWH8103HA( ) ECWH8123HA( ) ECWH8153HA( ) ECWH8183HA( ) ECWH8223HA( ) ECWH8273HA( ) ECWH8333HA( ) ECWH8393HA( ) ECWH8473HA( ) Suffix for lead crimped taped type Capacitance tolerance code ød Min. order Q'ty Taping Bulk mm

71 Rating & Dimensions & Quantity / Box Rated voltage : 1600 VDC, Capacitance tolerance : ±3 %(H), ±5 %(J) ECWHA3C102( ) ECWHA3C112( ) ECWHA3C122( ) ECWHA3C132( ) ECWHA3C152( ) ECWHA3C162( ) ECWHA3C182( ) ECWHA3C202( ) ECWHA3C222( ) ECWHA3C242( ) ECWHA3C272( ) ECWHA3C302( ) ECWHA3C332( ) ECWHA3C362( ) ECWHA3C392( ) ECWHA3C432( ) ECWHA3C472( ) ECWHA3C512( ) ECWHA3C562( ) ECWHA3C622( ) ECWHA3C682( ) ECWHA3C752( ) ECWHA3C822( ) ECWHA3C912( ) ECWHA3C103( ) ECWHA3C113( ) ECWHA3C123( ) ECWHA3C133( ) ECWHA3C153( ) ECWHA3C163( ) ECWHA3C183( ) ECWHA3C203( ) ECWHA3C223( ) ECWHA3C243( ) ECWHA3C273( ) ECWHA3C303( ) ECWHA3C333( ) ECWHA3C363( ) ECWHA3C393( ) ECWHA3C433( ) ECWHA3C473( ) Cap. (µf) L max T max Straight H max. S Min. order Q'ty Bulk Taping Bulk Crim mm Straight ped lead Crimped lead Crimped lead F Crimped lead Crimped lead ød (Suffix B) (Suffix Q) (Suffix B) (Suffix Q) Suffix for lead crimped taped type Capacitance tolerance code Metallized Film

72 Metallized Polypropylene Film Capacitor Type: ECWH(C) Designed for high frequency and pulse applications. Features Excellent electrical characteristics Low loss Flame-retardant epoxy resin coating RoHS directive compliant Recommended Applications General resonance circuit (630 VDC) Resonance circuits for microwave oven and IH cooker (630 VDC) Resonance circuits for microwave oven (630 VDC, 1250 VDC) General high voltage circuit (3000 VDC) Explanation of Part Numbers (630 VDC) E C W H C Product code Dielectric & construction Rated voltage 6 630VDC Capacitance Cap. Tol. Suffix Suffix H ±3 % Suffix Blank C Lead Form Straight Cut lead Explanation of Part Number for Odd Size Taping (630 VDC) E C W H R C Product code Dielectric & construction Rated voltage Capacitance mm Cap.tol Suffix Explanation of Part Numbers (1250 VDC) E C W H C 3 B J A Product code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix 3B 1250VDC J ±5 % Suffix A Lead Form Cut lead Explanation of Part Numbers (3000 VDC) E C W H C 3 F J Product code Dielectric & construction Rated voltage Capacitance Cap. Tol. Suffix 3F 3000VDC J ±5 % Suffix Blank C Lead Form Straight Cut lead

73 Specifications Category temp. range (Including temperature-rise on unit surface) 630 VDC 1250 VDC 40 C to 105 C : General resonance circuit 40 C to 85 C : When using compulsive air cooling for a resonance circuit 40 C to 105 C : General resonance circuit 40 C to 85 C : When using compulsive air cooling for a resonance circuit 3000 VDC 40 C to 85 C : General high voltage circuit Rated voltage 630 VDC, 1250 VDC, 3000 VDC 630 VDC 0.10 µf to 0.33 µf Capacitance range 1250 VDC 3000 VDC 0.08 µf to 0.12 µf µf to 0.01 µf 630 VDC ±3 %(H) Capacitance tolerance 1250 VDC ±5 %(J) 3000 VDC ±5 %(J) 630 VDC Dissipation factor (tan ) 1250 VDC tan0.05 % (20 C,1 khz), tan0.1 % (20 C,10 khz) 3000 VDC tan0.1 % (20 C,1 khz), tan0.1 % (20 C,10 khz) Withstand voltage Between terminals : Rated volt. (VDC)150 % 60 s 630 VDC Insulation resistance (IR) 1250 VDC IR9000 M (20, VDC, 60 s) 3000 VDC IR00 M (20, VDC, 60 s) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Dimensions in mm (not to scale) Metallized Film Packaging Specifications for Bulk Package Packing quantity : 100 pcs./bag Taping Specifications for Automatic Insertion Taping style Refer to the page of taping specifications. Packaging Specifications Type Rated volt. Cap. range (µf) Taping style AD AS B C D E Packing ECWH(C) 630 VDC 0.10 to 0.33 See the column Rating, Dimensions & Quantity Box for packing quantity. Lead Spacing Style Lead Spacing E mm

74 Rating & Dimensions Rated voltage : 630 VDC Capacitance tolerance : ±3 %(H) Cap (µf) L max T max H max. F G max. d Min. order Q'ty Taping mm Bulk ECWH6104HC( ) ECWH6114HC( ) ECWH6124HC( ) ECWH6184HC( ) ECWH6214HC( ) ECWH6244HC( ) ECWH6274HC( ) ECWH6284HC( ) ECWH6304HC( ) ECWH6324HC( ) ECWH6334HC( ) Suffix for lead form Rated voltage : 1250 VDC Capacitance tolerance : ±5 %(J) Cap (µf) L max T max H max. F G max. d Min. order Q'ty Bulk ECWHC3B803JA ECWHC3B104JA ECWHC3B114JA ECWHC3B124JA Rated voltage : 3000 VDC Capacitance tolerance : ±5 %(J) Cap (µf) L max T max H max. F G max. d Min. order Q'ty Bulk ECWHC3F242J( ) ECWHC3F362J( ) ECWHC3F392J( ) ECWHC3F432J( ) ECWHC3F562J( ) ECWHC3F822J( ) ECWHC3F103J( ) Suffix for lead form

75 Metallized Polypropylene Film Capacitors Type: EZPE Series Features High safety, Self-healing and Self-protecting function built-in Long product life, High reliability Low loss, Low ESR Flame retardant (Case and sealing resin) RoHS directive compliant Recommended Applications For DC filtering, DC link circuit Solar inverters Wind power generation Industrial power supplies Inverter circuit in appliances (Air Conditioners etc.) Construction Dielectric : Polypropylene film Electrodes : Metallized dielectric with segmented pattern Plastic case : UL94 V-0 Sealing : UL94 V-0 Terminals : Tinned wires,2-pin and 4-pin versions Explanation of Part Numbers Metallized Film E Z P E T A Product code Dielectric & construction Rated voltage 50 VDC VDC 1B 1100 VDC 1D 1300 VDC Capacitance Pin type Suffix Suffix L 2-pin type M 4-pin type Specifications Category temperature range (TC) (*1) 40 C to +85 C VDC, 800 VDC, 1100 VDC, 1300 VDC Rated voltage(vr) (*2) (Derating of rated voltage by more than 70 C (*3)) VDC 10 µf to 110 µf 800 VDC 10 µf to 60 µf Rated capacitance (CR) 1100 VDC 10 µf to 40 µf 1300 VDC 10 µf to 25 µf Capacitance tolerance ±10 % Between terminals:rated voltage. (VDC) 150 % 10 s Withstanding DC voltage Terminal to case:2110 VAC 10 s Insulation resistance (CR) CR =10000 > Ω F (20 C, VDC, 60 s) *1:The temperature of capacitor surface (case) *2:Use for DC voltage only *3:Refer to the page of DC voltage derating

76 Dimensions in mm (not to scale) Rating, Dimensions & Quantity / Box Type EZPE Rated voltage : VDC at 70 ( 450VDC at 85 ) CR. (µf) W H L P1 P2 dv/dt [V/µs] Permissible current Peak Current [Ao-p] EZPE50106LTA EZPE50156LTA EZPE50206LTA EZPE50256LTA EZPE50306MTA EZPE50356MTA EZPE50406MTA EZPE50456MTA EZPE50506MTA EZPE50556MTA EZPE50606MTA EZPE50656MTA EZPE50706MTA EZPE50756MTA EZPE50806MTA EZPE50856MTA EZPE50906MTA EZPE50956MTA EZPE50107MTA EZPE50117MTA (*1) RMS Current [Arms] (*2) ESRtyp [m] (*3) tan [%] (*4) *1:When rising temperature of capacitor surface by continuous peak current (included pulse current), use within limit specified for temperature of capacitor surface and self heating temperature rise. *2:Maximum RMS 70, 10 khz Use within limit for self heating temperature rise at capacitor surface. *3:Typical 20, 10 khz ESR : less than 2.5 ESRtyp *4:Maximum dissipation 1 khz *5:Minimum order quantity consists of 4 packing units. Mass [] MOQ [pcs] (*5)

77 Rating, Dimensions & Quantity / Box Type EZPE Rated voltage : 800 VDC at 70 ( 700VDC at 85 ) CR. (µf) W H L P1 P2 dv/dt [V/µs] Permissible current Peak Current [Ao-p] ESR typ [m] (*3) tan [%] (*4) EZPE80106LTA EZPE80156MTA EZPE80206MTA EZPE80256MTA EZPE80306MTA EZPE80356MTA EZPE80406MTA EZPE80456MTA EZPE80506MTA EZPE80556MTA EZPE80606MTA (*1) RMS Current [Arms] (*2) Mass [] MOQ [pcs] (*5) Type EZPE Rated voltage : 1100 VDC at 70 ( 920VDC at 85 ) Permissible current CR. dv/dt Peak (µf) W H L P1 P2 [V/µs] Current [Ao-p] ESRtyp [m] (*3) tan [%] (*4) EZPE1B106MTA EZPE1B156MTA EZPE1B206MTA EZPE1B256MTA EZPE1B306MTA EZPE1B356MTA EZPE1B406MTA (*1) RMS Current [Arms] (*2) Mass [] MOQ [pcs] (*5) Metallized Film Type EZPE Rated voltage : 1300 VDC at 70 ( 1100VDC at 85 ) Permissible current CR. dv/dt Peak (µf) W H L P1 P2 [V/µs] Current [Ao-p] ESRtyp [m] (*3) tan [%] (*4) EZPE1D106MTA EZPE1D156MTA EZPE1D206MTA EZPE1D256MTA (*1) RMS Current [Arms] (*2) *1:When rising temperature of capacitor surface by continuous peak current (included pulse current), use within limit specified for temperature of capacitor surface and self heating temperature rise. *2:Maximum RMS 70, 10 khz Use within limit for self heating temperature rise at capacitor surface. *3:Typical 20, 10 khz ESR : less than 2.5 ESRtyp *4:Maximum dissipation 1 khz *5:Minimum order quantity consists of 4 packing units. Mass [] MOQ [pcs] (*5)

78 Metallized Polypropylene Film Capacitors Type: ECQUA [Class X2] In accordance with UL/CSA and European safety regulation class X2 Equipped with a safety mechanism Features High humidity resistance THB test:85 C/85%/240VAC/1000hC1.0µF High safetysafety function installed Compact Flame-retardant plastic case and non-combustible resin RoHS directive compliant Recommended Applications Interference suppressors Explanation of Part Numbers E C Q U A A F Plastic Film Capacitors Product code Dielectric & construction Rated voltage Capacitance Cap.tol. Suffix Applicable Standard K ±10 % M ±20 % Blank A Straight Cut lead UL CSA Europe International UL Class X2 CAN/CSA E Class X2 UL EN Class X2 IEC Class X2 VDE When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUA, 0.1 µf. Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No Specifications Category temp. range -40 C to +110 C Rated voltage 275 VAC Capacitance range 0.10 µf to 2.2 µf Capacitance tolerance ± 10 % (K), ± 20 %(M) Dissipation factor (tan ) C < =1.0 µf : tan < =0.1 % (20 C, 1 khz) C < >1.0 µf : tan < =0.2 % (20 C, 1 khz) Withstand voltage Insulation resistance (IR) Between terminals: 633 VAC, 1183 VDC 60 s Between terminals to enclosure:2050 VAC 60 s C < =0.33 µf : IR =10 > MΩ (20 C, 100 VDC, 60 s) C>0.33 µf : IR =0 > MΩ µf (20 C, 100 VDC, 60 s) C < =0.47 µf : IR =2000 > MΩ (20 C, VDC, 60 s) Maximum AC voltage 310 VAC Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave). A faint corona discharge may occur inside of the capacitor element at rated voltage, however there is no influence on the reliability of the capacitor. (Suitable for series to the mains usage - for more details, please contact your Panasonic contact person.) Maximum AC voltage including line voltage fluctuation is 310V AC. 310VAC is not nominal continuous applied voltage, but only indicates maximum value including in the voltage of the power supply. Basic nominal voltage is considered as 240V AC. This maximum AC voltae is specified in only ECQUA type, not specified in other types. Please refer to individual product specification, and contact us for further questions regarding design life.

79 Dimensions in mm (not to scale) L0.5 T0.5 Marking Example H0.5 F0.4 20min. d Q - Rating & Dimensions Capacitance tolerance : ±10 %(K), ±20 %(M) ECQUAAF104( ) ECQUAAF154( ) ECQUAAF224( ) ECQUAAF334( ) ECQUAAF474( ) ECQUAAF684( ) ECQUAAF105( ) ECQUAAF155( ) ECQUAAF225( ) Cap. (µf) L T H F d P Suffix for lead form Cap. tol. code Q Min. order Q'ty Straight Cut lead Interference Suppressor

80 Metallized Polyester Film Capacitor Type: ECQUL [Class X2] [Class Y2/X2] In accordance with UL/CSA and European safety regulation class X2 or class Y2/X2 Features Compact Flame-retardant plastic case and non-combustible resin RoHS directive compliant Recommended Applications Interference suppressors Explanation of Part Numbers E C Q U 2 A L Product code Dielectric & construction Rated voltage Capacitance Cap.tol. Suffix Suffix Applicable Standard K ±10 % M ±20 % Blank A Straight Cut lead UL CSA Europe International UL CAN/CSA E CSA C22.2 No.8-M1986 EN IEC Class Y2/X2 Class X2 Class Y2/X2 Class X2 Electromagnetic Interference (EMI) Filters Class Y2/X2 Class X2 Class Y2/X2 Class X2 ( μf to μf) ( μf to 2.2 μf) ( μf to μf) ( μf to 2.2 μf) (1.2 μf to 2.2 μf) ( μf to μf) ( μf to 2.2 μf) ( μf to μf) ( μf to 2.2 μf) UL CSA VDE When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUL, 0.1 µf. Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No This capacitor is recognized for European standards by VDE only. But, there are no problems using this capacitor in a device which will get approvals from certification bodies in Europe, SEMKO, DEMKO, NEMKO, FIMKO and SEV etc. except VDE. Specifications Category temp. range -40 C to +100 C (85 C max. on CSA C22.2 No.8 spec.) Rated voltage 275 VAC (250 VAC on CSA C22.2 No.8 spec.) Capacitance range µf to 2.2 µf Capacitance tolerance ± 10 % (K), ± 20 %(M) Dissipation factor (tan ) tan < =1.0 % (20 C, 1 khz) Withstand voltage Between terminals: 575 VAC, 1768 VDC 60 s ( µf to 2.2 µf) Between terminals: 1 VAC, 2121 VDC 60 s ( µf to µf) Between terminals to enclosure:2050 VAC 60 s C < =0.33 µf : IR =10 > MΩ (20 C, 100 VDC, 60 s) Insulation resistance (IR) C>0.33 µf : IR =0 > MΩ µf (20 C, 100 VDC, 60 s) IR =2000 > MΩ (20 C, VDC, 60 s) Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave).

81 Dimensions in mm (not to scale) L0.5 F Q - H0.5 20min. 1.2μ 1.0 T0.5 d Marking Example STYLE A side B side C side STYLE Aside Bside 1 ECQUL V DE GMF μ 1to μ K 275 VY2/X2 ECQUL MKT μ μ to μ 250 V K 40/100/ V μ X2/Y2 2 ECQUL V DE GMF μ μ K 275 VX2 MKT to 0.047μ V 40/100/ ECQUL μ ECQUL 3 to.0082μ K 275V 0.056μ.068μ K 40/100/21 1.0μ V DE GMF X2 MKT to 1.0μ 275 V 250 V X X ECQUL 275V ECQUL.μ K 40/100/21 1.2μ 8X V to 2.2μ DE GMF 275 Vμ 250 KV to 2.2μ MKT X V X2 Rating & Dimensions Capacitance tolerance : ±10 %(K), ±20 %(M) Cap. (µf) L T H F d P Q ECQU2A102L( ) ECQU2A122L( ) ECQU2A152L( ) ECQU2A182L( ) ECQU2A222L( ) ECQU2A272L( ) ECQU2A332L( ) ECQU2A392L( ) ECQU2A472L( ) ECQU2A562L( ) ECQU2A682L( ) ECQU2A822L( ) ECQU2A103L( ) ECQU2A123L( ) ECQU2A153L( ) ECQU2A183L( ) ECQU2A223L( ) ECQU2A273L( ) ECQU2A333L( ) ECQU2A393L( ) ECQU2A473L( ) ECQU2A563L( ) ECQU2A683L( ) ECQU2A823L( ) ECQU2A104L( ) ECQU2A124L( ) ECQU2A154L( ) ECQU2A184L( ) ECQU2A224L( ) ECQU2A274L( ) ECQU2A334L( ) ECQU2A394L( ) ECQU2A474L( ) ECQU2A564L( ) ECQU2A684L( ) ECQU2A824L( ) ECQU2A105L( ) ECQU2A125L( ) ECQU2A155L( ) ECQU2A185L( ) ECQU2A225L( ) Suffix for lead form Cap. tol. code Min. order Q'ty Interference Suppressor

82 Metallized Polyester Film Capacitor Type: ECQUG[Class X1] In accordance with UL/CSA and European safety regulation class X1 Features Equipped with a safety mechanism Flame-retardant plastic case and non combustible resin RoHS directive compliant Recommended Applications Interference suppressors Explanation of Part Numbers E C Q U 3 A M G Product code Applicable Standard UL CSA Europe International Dielectric & construction Rated vol. Capacitance Cap. Tol. M ±20 % When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUG, 0.1 µf. Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No.. European standards marking are NEMKO only. But, there are no problem using this capacitor in a device which will get approvals from certification bodies in Europe, VDE, FIMKO, SEMKO, DEMKO, and SEV etc. except VDE and FIMKO. Suffix Suffix Blank A Straight Cut lead UL Class X1 UL CAN/CSA E Class X1 CSA EN Class X1 IEC Class X1 NEMKO Specifications Category temp. range Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) -40 C to +100 C 300 VAC µf to 1.0 µf (E6) ±20 % (M) tan < =1.0 % (20 C, 1 khz) Between terminals : 575 VAC, 1768 VDC, 60 s Between terminals to enclosure : 2100 VAC, 60 s C < =0.33 µf : IR > =10 MΩ (20 C, 100 VDC, 60 s) C>0.33 µf : IR > =0 MΩ µf (20 C, 100 VDC, 60 s) IR > =2000 MΩ (20 C, VDC, 60 s) Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave).

83 Dimensions in mm (not to scale) A B Rating & Dimensions Capacitance tolerance : ±20 %(M) ECQU3A103MG( ) ECQU3A153MG( ) ECQU3A223MG( ) ECQU3A333MG( ) ECQU3A473MG( ) ECQU3A683MG( ) ECQU3A104MG( ) ECQU3A154MG( ) ECQU3A224MG( ) ECQU3A334MG( ) ECQU3A474MG( ) ECQU3A684MG( ) ECQU3A105MG( ) Cap. (µf) L T H F d P Q Suffix for lead form Cap. tol. code Min. order Q'ty Interference Suppressor

84 Metallized Polyester Film Capacitor for Noise suppression of Automobile Type : ECQE Non-inductive construction using metallized polyester film with flame retardant epoxy resin Features Excellent water-proof and corrosion-proof construction properties. Guaranteed operation temperture of 130 C max Available with wide variety of terminals, including blacket and lead wire RoHS directive compliant Recommended Applications Noise suppression for automobile Explanation of Part Numbers E C Q E Product code Dielectric & construction Rated voltage Capacitance Suffix Suffix Suffix Suffix Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) 40 C to +130 C (Except cord, connector, tube and tape) 250 VDC (Derating of rated voltage by 1.11 %/ C at more than 85 C) 0.47 µf, 2.2 µf, 4.7 µf ±20 % (M) tan < =1.0 % (20 C, 1 khz) 250 VDC 150 % for 60 s IR =3000 > MΩ µf (20 C, 100 VDC, 60 S) Shape (Example) Other voltage ratings, capacitance values and special dimensions are available upon request. Please consult engineering section.