Anti-surge Chip Resistors
|
|
- Oliver Jordan
- 5 years ago
- Views:
Transcription
1 Anti-surge hip Resistors Datasheet Features 1) Exclusive resistive element pattern and laser trimming technology results in significantly improved surge resistance characteristics. 2) 2kV to 5kV electrostatic discharge resistance. 3) Superior power ratings. 4) ROHM resistors have obtained ISO91 / ISO / TS16949 certification. 5) orresponds to AE-Q2. Products List (mm) Size (inch) Rated Power (7 ) () Limiting Element Voltage (V) Temperature oefficient (ppm / ) Tolerance (%) Range Operating Temperature Range ( ) Automotive Grade Available ESR / Ω 976kΩ to 2.2MΩ ESR Ω 3MΩ to MΩ * * 1 2 * 1 Please contact us for the higher rated power. E24 Standard products, E96 ustom products. Part Number Description E S R 1 E Z P J 1 ESR (Anti-surge chip resistors) Size (mm [inch]) 1 (15 [42]) 3 (168 [63]) 1 (212 [85]) 18 (3216 [126]) 25 (3225 [121]) Packaging Specifications ode ode Quantity / Reel ESR1 MZP 1, Packaging specifications ESR3 EZP EZP EZP Embossed tape JZP 4, Tolerance D ( ±% ) D ( ±% ) F ( ±1% ) J ( ±5% ) Nominal code, 3 or 4 digits. denotes jumper type. tolerance D,F J code 4 digits 3 digits Ex.) 1Ω = 1R ( ±1% ) 1R ( ±5% ) 1 Ω = 1R ( ±%, ±1%) 1 ( ±5% ) 1M Ω = 14 ( ±%, ±1%) 15 ( ±5% ) 1/4
2 hip Resistor Dimensions and Markings ESR1 / 3 / 18 / 25 a b L t a b L 13 t <Marking method> There are three or four digits used for the calculation number according to IE code and R is used for the decimal point. (mm) (inch) L t a b (Unit mm) Marking existence ESR ±.5 ±.5.35±.5.2± No ESR ±.1.8±.1.45±.1.3±.2.3±.2 No ± ±.1 5±.1.3±.2.4±.2 Yes ± ±.15 5±.1.3±.25 ±.25 Yes ± ±.15 5±.1.3±.25 ±.25 Yes Only with square mark Land pattern Example D B Land A (Unit mm) Dimensions A B D ESR ESR /4
3 Derating urve hen the ambient temperature exceeds 7, power dissipation must be adjusted according to the derating curves below. ESR1 / 3 / 1 / 18 / 25 1 PERENT RATED POER (%) AMBIENT TEMPERATURE ( ) haracteristics Test Items Guaranteed Value Resistor Type Test onditions Variation of resistance with temperature Overload Solderability to soldering heat Rapid change of temperature Damp heat, steady state Endurance at 7 Endurance to solvent Bend strength of the end face plating Static electric characteristics See P.1 See P.1 ± (2.%+.1Ω) A new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. ± (1.%+.5Ω) No remarkable abnormality on the appearance. ± (1.%+.5Ω) ± (3.%+.1Ω) ± (3.%+.1Ω) ± (3.%+.1Ω) ± (1.%+.5Ω) ± (1.%+.5Ω) ithout mechanical damage such as breaks. ± (5.%+.5Ω) 2 Measurement +2 / 55 / +2 / +125 Rated voltage (current) 2., 2s (ESR1) Rated voltage (current) 2.5, 2s (ESR3 / 1 / 18 / 25) Maximum overload voltage Rosin Ethanol 25% (eight) Soldering condition 235±5 Duration of immersion 2.±s Soldering condition 26±5 Duration of immersion 1±1s Test temp. 55 to cycle 4, 93%RH (Relative Humidity) Test time 1,h to 1,48h 7 Rated voltage (current) 1.5h ON h OFF Test time 1,h to 1,48h 155 Test time 1,h to 1,48h 23±5, Immersion cleaning, 5±min Solvent 2 propanol EIAJ ED-471 / 3 TEST METHOD34 Voltage 2kV (ESR1) 3kV (ESR3 / 1 / 18) 5kV () 1pF R 1.5kΩ Apply cycle 1time ompliance Standard(s) IE JIS hip weight (typical value) Parameter Unit ESR1 ESR3 eight mg/pc /4
4 Tape Dimensions Paper Tape (Unit mm) F E A B P2 P P1 ESR1 8.±.3 3.5± ±.1.7±.1 1.2±.1 φd E ESR3 8.±.3 3.5± ±.1 1.1±.1 1.9±.1 B F 8.±.3 3.5± ±.1 8.±.3 3.5± ± Top tape Base paper (Bottom tape) omponents avity A D P P1 P2 T2 ESR1 φ ±.1 2.±.5 2.±.5 T2 ESR3 φ ±.1 4.±.1 2.±.5 φ ±.1 4.±.1 2.±.5 φ ±.1 4.±.1 2.±.5 Embossed Tape (Unit mm) F E A B P P2 φd E 8.±.3 3.5± ±.1 3.±.1 3.5±.1 D P P1 P2 K F φ ±.1 4.±.1 2.±.5 B A P1 K Reel Dimensions A B D A B D Label Label AORDING TO EIAJ ET-72B AORDING TO EIAJ ET-72B (RRV) (Unit mm) A B D ESR1 ESR3 φ φ φ13±.2 4/4
5 Notice Notes 1) 2) 3) 4) 5) 6) 7) 8) 9) 1) 11) 12) 13) The information contained herein is subject to change without notice. Before you use our Products, please contact our sales representative and verify the latest specifications Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. The Products specified in this document are not designed to be radiation tolerant. For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. hen providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM ustomer Support System http///contact/ 214 ROHM o., Ltd. All rights reserved. R112A
Linear Regulator Application Information
Linear Regulator Application Information IC Product Name BD00IA5WEFJ Topology LDO Linear Regulator Voltage source Input Output 1 2.4V to 5.5V 1.0V, 500mA *1 2 2.4V to 5.5V 1.2V, 500mA *1 3 2.4V to 5.5V
More informationThermal Calculation for Linear Regulator
Linear Regulator Series Thermal Calculation for Linear Regulator The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted
More informationChip tantalum capacitors (Fail-safe open structure type)
TCFG1C6M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions
More informationChip tantalum capacitors (Fail-safe open structure type)
TCFG0J106M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions
More informationSiC Power Module BSM300D12P2E001
SiC Power Module BSM3D2P2E Application Motor drive Inverter, Converter Photovoltaics, wind power generation. Induction heating equipment. Circuit diagram 7 9 8 3,4 Features ) Low surge, low switching loss.
More informationSiC Power Module BSM180D12P3C007
SiC Power Module BSM8D2P3C7 Application Motor drive Inverter, Converter Photovoltaics, wind power generation. Induction heating equipment. Circuit diagram 98(N.C) 3,4 Features ) Low surge, low switching
More informationSLI-570 / SLA-570 Series
Features Outline Viewing angle 2θ /2 : (SLI-570 Series) Viewing angle 2θ /2 : 25 (SLA-570 Series) High brightness Color Type U U2 D Y Y2 M Dimensions Recommended Solder Pattern Tolerance : 0.2 (unit :
More informationV D Y. Recommended Solder Pattern. Tolerance : ±0.2 (unit : mm) Absolute Maximum Ratings (Ta=25ºC) Reverse Operating Temp. Storage Temp.
SLR-56x Series Data Sheet Features Viewing angle 2θ 1/2 : 40 Outline Color Type V D Y M Dimensions Recommended Solder Pattern 5.5 φ5.0 ±0.1 8.7 2.5 or 5.0 0.5 24.0Min. (2.5) Cathode Tolerance : ±0.2 (unit
More informationSiC Power Module BSM300D12P2E001
SiC Power Module BSM3D2P2E Application Motor drive Inverter, Converter Photovoltaics, wind power generation. Induction heating equipment. Circuit diagram 7 9 8 3,4 Features ) Low surge, low switching loss.
More informationThick Film Chip Resistors
Thick Film Chip Resisrs MCR Series Features 1) Full line up from ultra small size (15) 2512 with jumper type. 2) High reliability metal glazed thick film. 3) ROHM resisrs have obtained ISO91/ISO/TS16949
More informationSiC Power Module BSM180D12P2C101
SiC Power Module Application Motor drive Inverter, Converter Photovoltaics, wind power generation. Induction heating equipment. Circuit diagram 98(N.C) 3,4 Features ) Low surge, low switching loss. 7(N.C)
More informationSiC Power Module BSM600D12P3G001. Datasheet. Application Motor drive. Circuit diagram. Inverter, Converter. Photovoltaics, wind power generation.
SiC Power Module BSM6D2P3G Application Motor drive Inverter, Converter Photovoltaics, wind power generation. Induction heating equipment. Circuit diagram 7 9 8 3,4 Features ) Low surge, low switching loss.
More informationThick film chip resistors
Thick film chip resistors MCR series Features 1)Full line up from ultra small size (15) to 2512 with jumper type. 2)High reliability metal glazed thick film. 3)ROHM resistors have obtained ISO91/ISO/TS16949
More informationSiC Power Module BSM080D12P2C008
SiC Power Module BSM8DPC8 Application Motor drive Inverter, Converter Photovoltaics, wind power generation. Induction heating equipment. Circuit diagram 98(N.C) 3,4 Features ) Low surge, low switching
More informationSiC Power Module BSM600D12P3G001. Datasheet. Application Motor drive. Circuit diagram. Inverter, Converter. Photovoltaics, wind power generation.
SiC Power Module Application Motor drive Inverter, Converter Photovoltaics, wind power generation. Induction heating equipment. Circuit diagram 7 9 8 3,4 Features ) Low surge, low switching loss. 6 5 NTC
More informationSML-A1 Series EXCELED TM
EXCELED TM Features Outline EXCELED TM series Compact size side-view LEDs Size 6 1611(65) (42) 1..6mm 1.6 1.15mm(t=.55mm) (t=.2mm) Color Type V U D W Y M P E B WB Dimensions Recommended Solder Pattern
More informationSLR-343x/SLR343x Series
SLR-343x/SLR343x Series Data Sheet Features Viewing angle 2θ 1/2 : Competent to direct mount Outline Color Type V D Y M P E B WB Dimensions Recommended Solder Pattern ±0.1 2.5 or 5.0 Tolerance : ±0.2 (unit
More informationSLI-570x/SLA-570x Series
SLI-570x/SLA-570x Series Data Sheet Features Viewing angle 2θ 1/2 : (SLI-570 Series) Viewing angle 2θ 1/2 : 25 (SLA-570 Series) High brightness Outline Color Type U U2 D Y Y2 M Dimensions Recommended Solder
More informationSLR-343x/SLR343x Series
SLR-343x/SLR343x Series Data Sheet Features Viewing angle 2θ 1/2 : Competent to direct mount Outline Color Type V D Y M P E B WB Dimensions Recommended Solder Pattern ±0.1 2.5 or 5.0 Tolerance : ±0.2 (unit
More informationSiC Power Module BSM300C12P3E201
SiC Power Module BSM3CP3E Application Motor drive Converter Photovoltaics, wind power generation. Circuit diagram 7 9(N.C) 8 3,4 6 5 Features ) Low surge, low switching loss. *Do not connect anything to
More informationColor. Type V U D. (unit : mm) (note) Tolerance is within 0.1mm unless otherwise specified Except burr on terminal from consideration.
Features Outline Reverse-mount available type Size 06 3412 (0402) (1305) 1.0 0.6mm 3.4 1.25mm (t=0.2mm) (t=1.1mm) Color Type V U D W M B WB Dimensions Recommended Solder Pattern (unit : mm) (note) Tolerance
More informationType V U. Tolerance : 0.1 (unit : mm) * : At least one mark appear on cathode side. Absolute Maximum Ratings (Ta=25ºC)
.25.8 1.25 SML-21 Series Features Outline Nomal type and Low current type line-up. Size 16 212 (42) (85) 1..6mm 2. 1.25mm (t=.2mm) (t=.8mm) Color Type V U D Y W Dimensions 2. 1.4 Recommended Solder Pattern
More informationSML-P1 Series PICOLED TM
PICOLED TM Datasheet Features Outline Ultra compact, thin size 1.0 0.6mm Original device technology enables high brightness and high reliability Lead Free/RoHS Compliant. Size 1006 (0402) 1.0 0.6mm (t=0.2mm)
More informationV D Y P E B WB. Absolute Maximum Ratings (Ta=25ºC) SLR-343VR Red 630 SLR-343VC SLR-343YY Yellow SLR-343PG
Features Outline Viewing angle 2θ 1/2 : Competent to direct mount Color Type V D Y M P E B WB Dimensions Recommended Solder Pattern 1.0 ±0.1 2.0 2.5 or 5.0 Tolerance : 0.2 (unit : mm) (unit : mm) Specifications
More informationP D = 5 W Transient Voltage Suppressor. Package. Description. Features. Applications. Typical Application. (1) (2) (1) Cathode (2) Anode
P D = 5 W Transient Voltage Suppressor Data Sheet Description The is a power Zener diode designed for the protection of automotive electronic units, especially from the surge generated during load dump
More informationChip tantalum capacitors
Chip tantalum capacitors TCO series Case TCO Series Case Features () ) Conductive polymer used for the cathode material. 2) Ultra-low ESR. (/ compared with the conventional type) 3) Screening by thermal
More informationSML-52 Series. Datasheet. Outline. Features. 2-color type LED. Abundant 2 color variations. Size (0605) mm (t=0.6mm)
Datasheet Features Outline 2-color type LED Abundant 2 color variations Size Color Type B 35 (0605).3.5mm (t=0.6mm) D Y Dimensions Recommended Solder Pattern SL-522W SL-522 8W series / SL522BW Specifications
More informationM P E B. Recommended Solder Pattern. Tolerance : ±0.1 (unit : mm) Operating Temp. Storage Temp.
SML-S1x Series Data Sheet Features Surface mount Lens LEDs Narrow directivity and high brightness Availability of reverse mounting Outline Size 3216(16) size 3.2 1.6mm (t=1.85mm) Color Type V U D Y M P
More informationP D = 5 W / 6 W Transient Voltage Suppressor. Description. Package SZ-10. Features. Selection Guide. Applications. Typical Application
P D = 5 W / 6 W Transient Voltage Suppressor SZ-0N Series Data Sheet Description The SZ-0N series are power Zener diodes designed for the protection of automotive electronic units, especially from the
More informationRecommended Solder Pattern. Tolerance : ±0.05 (unit : mm)
SML-P11x Series PICOLED TM -eco Data Sheet Features Ultra compact, thin size 1.0 0.6mm Accomplishes low power consuming application specification assured at IF=1mA Outline Size 1006 (0402) 1.0 0.6mm (t=0.2mm)
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationP D = 5 W / 6 W Transient Voltage Suppressor. Package SZ-10. Description. Features. Selection Guide. Applications. Typical Application
P D = 5 W / 6 W Transient Voltage Suppressor SZ-0N Series Data Sheet Description The SZ-0N series are power Zener diodes designed for the protection of automotive electronic units, especially from the
More informationSMLK18WB/K28WB Series
SMLK8WB/K8WB Series Data Sheet Features High heat radiation "PSML" series Low package by flat frame structure High Luminous Intensity Outline Size 50 (808).5.0mm (t=0.6mm) Color Type WB Dimensions Recommended
More informationData sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationM P E B WB. Recommended Solder Pattern. Tolerance : ±0.1. Absolute Maximum Ratings (Ta=25ºC) Reverse Operating Temp. Storage Temp.
SML-Ex Series Data Sheet Features EXCELED TM series Compact, Thin size (.6 mm, t=0.36mm) LED die position is middle of package. LED die consists of 4 elements Original device technology enables high brightness
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationConductive polymer chip capacitors (Standard)
Conductive polymer chip capacitors (Standard) TCO Series B Case Features 1) Conductive polymer used at the cathode for ultra-low ESR. 2) Conductive polymer has a self-healing function that prevents failure,
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More informationSML-E1 Series. Datasheet. Outline. Features EXCELED TM series Compact, Thin size ( mm, t=0.36mm) LED die consists of 4 elements
Datasheet Features EXCELED TM series Compact, Thin size (.6 mm, t=0.36mm) LED die consists of 4 elements Original device technology enables high brightness and high reliability LED die position is middle
More informationFG Silicon N-channel MOS FET (FET1) Silicon P-channel MOS FET (FET2) For switching circuits. Package. Overview. Features. Marking Symbol: V7
FG6943 Silicon N-channel MOS FET (FET) Silicon P-channel MOS FET (FET2) For switching circuits Overview FG6943 is N-P channel dual type small signal MOS FET employed small size surface mounting package.
More informationSULFURATION-RESISTANT CHIP RESISTOR
FEATURES ROHS ith good sulfuration-resistant performance Miniature and light weight. Suit for reflow and wave flow solder. Stable electrical capability, high reliability. Low assembly cost, suit for automatic
More informationS-57M1 Series HIGH-SPEED BIPOLAR HALL EFFECT LATCH. Features. Applications. Package. ABLIC Inc., Rev.1.
www.ablic.com www.ablicinc.com HIGH-SPEED BIPOLAR HALL EFFECT LATCH ABLIC Inc., 2011-2013 Rev.1.2_02 The, developed by CMOS technology, is a high-accuracy Hall IC that operates with a high-sensitivity,
More informationIS2805 DESCRIPTION FEATURES
DESCRIPTION The is an optically coupled isolator consists of two infrared emitting diodes in reverse parallel connection and optically coupled to an NPN silicon photo transistor. This device belongs to
More informationFrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationDerating of the MOSFET Safe Operating Area Outline:
Outline: This document discusses temperature derating of the MOSFET safe operating area. Table of Contents Outline:... 1 Table of Contents... 2 1. Introduction... 3 2. What is the safe operating area?...
More informationMR48V256A GENERAL DESCRIPTION FEATURES PRODUCT FAMILY. PEDR48V256A-06 Issue Date: Oct. 17, 2011
32,768-Word 8-Bit FeRAM (Ferroelectric Random Access Memory) PEDR48V256A-06 Issue Date: Oct. 17, 2011 GENERAL DESCRIPTION The is a nonvolatile 32,768-word x 8-bit ferroelectric random access memory (FeRAM)
More informationRectifying Diode RR2LAM6STF
Rectifying Diode RR2LAM6STF Datasheet AEC-Q0 Qualified Series Dimensions (Unit : mm) Land Size Figure (Unit : mm) Standard Rectifier 2.50±0.20 0.7± 0.0 0.05 2.0 ().4 Applications General rectification
More informationSML-811x/812x/813x Series
SML-8x/82x/83x Series Data Sheet Features Reverse-mount available type Outline Size 342 (5) 3.4.25mm (t=.mm) Color Type V U D W M B WB Dimensions Recommended Solder Pattern 3.4.2 R.25.25 φ2.4 4-R.3 R e
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationRectifier Diode RR2L4S
5.3±0. 0.05 9.5±0. 5.5±0.05 ±0..75±0. Rectifier Diode RRL4S Series Dimensions (Unit : mm) Land size figure (Unit : mm) Standard Rectifier.0.0 4.5±0. 5.0±0.3.±0.3.6±0. Application 4. General rectification
More informationS-5743 A Series 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC. Features. Applications. Package.
www.ablicinc.com S-5743 A Series 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC ABLIC Inc., 2015-2017 Rev.1.1_02 This IC, developed by CMOS technology, is a high-accuracy
More informationABLIC Inc., Rev.2.2_02
S-5841 Series www.ablicinc.com TEMPERATURE SWITCH IC (THERMOSTAT IC) ABLIC Inc., 2007-2015 Rev.2.2_02 The S-5841 Series is a temperature switch IC (thermostat IC) which detects the temperature with a temperature
More informationTOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSM6N15FE
SSMNFE TOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSMNFE High Speed Switching Applications Analog Switching Applications Unit: mm Small package Low ON resistance : R on =. Ω (max) (@V GS
More informationTC4028BP, TC4028BF TC4028BP/BF. TC4028B BCD-to-Decimal Decoder. Pin Assignment TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC4028BP, TC4028BF TC4028B BCD-to-Decimal Decoder TC4028B is a BCD-to-DECIMAL decoder which converts BCD signal into DECIMAL signal. Of ten outputs
More informationS-57P1 S Series FOR AUTOMOTIVE 150 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC. Features. Applications.
www.ablicinc.com FOR AUTOMOTIVE 150 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC ABLIC Inc., 2015-2017 This IC, developed by CMOS technology, is a high-accuracy Hall effect
More informationIS181 DESCRIPTION FEATURES
DESCRIPTION The IS181 series of optocoupler consists of an infrared light emitting diode optically coupled to an NPN silicon photo transistor in a space efficient Mini Flat Package. FEATURES Low Profile
More informationTOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSM3K02F
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSM3K02F High Speed Switching Applications Unit: mm Small package Low on resistance : R on = 200 mω (max) (V GS = 4 V) : R on = 250 mω (max) (V
More informationPREJECTION INDUSTRIAL CORP. 百泉工業股份有限公司
: 1 OF 11 1. Features High performance (Isat) realized by metal dust core. Performance low resistance,high current rating. Low loss realized with low DCR. Frequency range : up to (1.0 MHz). 100% lead (pb)
More informationThick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
More informationSchottky Barrier Diode RBR10NS40AFH
Schottky Barrier Diode RBRNS4AFH AEC-Q1 Qualified Application Dimensions (Unit : mm) Land size figure (Unit : mm) Switching power supply (2) 11 2.5 Features 1) Cathode common dual type 2) High reliability
More informationTOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSM6N44FE. DC I D 100 ma Pulse I DP 200
SSMNFE TOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSMNFE High Speed Switching Applications Analog Switching Applications.±. Unit: mm Compact package suitable for high-density mounting Low
More informationTOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SG02FU IN A GND
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SG02FU 2 Input NOR Gate Features High-level output current: I OH /I OL = ±8 ma (min) at = 3.0 High-speed operation: t pd = 2.4 ns (typ.) at
More informationSML-P12x/P13x Series
SML-P2x/P3x Series PICOLED TM Data Sheet Features Ultra compact, thin size.0 0.6mm Original device technology enables high brightness and high reliability Lead Free/RoHS Compliant. Outline Size 006 (0402).0
More informationTC7WB66CFK,TC7WB66CL8X TC7WB67CFK,TC7WB67CL8X
CMOS Digital Integrated Circuits Silicon Monolithic TC7WB66CFK,TC7WB66CL8X TC7WB67CFK,TC7WB67CL8X 1. Functional Description Dual SPST Bus Switch 2. General TC7WB66CFK/L8X,TC7WB67CFK/L8X The TC7WB66CFK/L8X
More informationAPT1608SYCK-AMT. 1.6 x 0.8 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION SELECTION GUIDE
1.6 x 0.8 mm SMD Chip LED Lamp DESCRIPTIONS The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs
More informationTC74HC155AP, TC74HC155AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC155AP, TC74HC155AF Dual 2-to-4 Line Decoder 3-to-8 Line Decoder TC74HC155AP/AF The TC74HC155A is a high speed CMOS DUAL 2-to-4 LINE DECODER
More informationMaintenance/ Discontinued
oltage Regulators N7xx/N7xxF Series 3-pin positive output voltage regulator ( type) Overview The N7xx series and the N7xxF series are 3- pin, fixed positive output type monolithic voltage regulators. Stabilized
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More information1.0% (1.2 V to 1.45 V output product: 15 mv) 150 mv typ. (3.0 V output product, I OUT = 100 ma)
S-126 Series www.ablicinc.com ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 26-215 Rev.3.2_2 The S-126 Series is a positive voltage regulator with ultra low current consumption,
More informationApplications. Capacitance Tolerance G = ±2% J = ±5%
Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical
More informationTC74VCX14FT, TC74VCX14FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74CX14FT, TC74CX14FK Low-oltage Hex Schmitt Inverter with 3.6- Tolerant Inputs and Outputs TC74CX14FT/FK The TC74CX14FT/FK is a high-performance
More informationDetection of both poles, S pole or N pole Active "L", active "H" Nch open-drain output, CMOS output
S-5716 Series www.ablicinc.com LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC ABLIC Inc., 2011-2015 Rev.1.6_02 The S-5716 Series, developed by CMOS technology, is a high-accuracy
More informationMaintenance/ Discontinued
Video Camera LSI MN31121SA CCD Image Sensor Vertical Driver IC Overview The MN31121SA is a 2D interline CCD image sensor vertical driver IC that integrates four vertical driver channels and one SUB drive
More information(E-24 ): T.C.R (ppm/ ) Three digits (E-24 series):the first two digits are significant figures and the third one denotes number of zeros.
GENERL HIK FILM HIP FIXED RESISOR General hick Film hip Fixed Resistor Features Miniature and light weight Suit for reflow and wave flow solder, Stable electrical capability,high reliability, Low assembly
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationEmbossed Tape lapplication Reel size (mm) 180 Switching Type Tape width (mm) 8 Basic ordering unit (pcs) 8000
EM6M2 20V Nch + Pch Small Signal MOSFET Datasheet loutline Symbol Tr1:Nch Tr2:Pch SOT-563 V DSS 20V -20V SC-107C R DS(on) (Max.) 1.0Ω 1.2Ω EMT6 I D ±200mA ±200mA P D 150mW lfeatures 1) Low on - resistance.
More informationAN78xx/AN78xxF Series
3-pin positive output voltage regulator ( type) Overview The N7xx series and the N7xxF series are 3- pin, fixed positive output type monolithic voltage regulators. Stabilized fixed output voltage is obtained
More informationHIGH POWER THICK FILM CHIP FIXED RESISTOR
HIGH POWER THICK FI CHIP FIXED RESISTOR 2W High power up to 2W Current detecting resistors for power supply, motor circuits ROHS Compliant with RoHS directive etc Halogen free requirement Switching Power
More informationChip tantalum capacitors
Chip tantalum capacitors TCO Series Features ( ) 1) Conductive polymer used for the cathode material. 2) Ultra-low ESR. (1/ compared with the conventional type) 3) Screening by thermal shock. External
More informationMaintenance/ Discontinued
ICs for Compact Disc/CD-ROM Player AN8783SB 4-channel linear driver IC for CD/CD-ROM drive Overview The AN8783SB employs one channel of power op-amp. system and three channels of H-bridge system. Two channels
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationHigh Precision Thick Film chip resistors. Size 1206, 0805, 0603, 0402, 0201
WK2K, WK08K, WK06K, WK04K, WK02K ±.0%, ±0.5% Thick Film TC50/TC00 High Precision Thick Film chip resistors Size 206, 0805, 0603, 0402, 020 Page of 7 ASC_WKxxK_V07 NOV- 205 FEATURE. SMD Thick film resistor
More informationCR-PF Series Ultra-Low Lead Content Thick Film Resistor
RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**
More informationSuper Fast Recovery Diode RFN20TJ6SFHG
Super Fast Recovery Diode RFN2TJ6SFHG AEC-Q Qualified Series Dimensions (Unit : mm) Structure Standard Fast Recovery.2±.2 3.±. 4.5±. 2.6±. Application General rectification Features ) Low forward voltage
More informationLead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
More informationS-57K1 A Series FOR AUTOMOTIVE 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC. Features. Applications.
www.ablic.com FOR AUTOMOTIVE 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC ABLIC Inc., 2013-2019 This IC, developed by CMOS technology, is a high-accuracy Hall effect latch
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationLead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationTOSHIBA LED lamps TL12W01-L(T30)
TOSHIBA LED lamps TL12W01-L(T30) Surface-mount devices 10.5 (L) mm 5.0 (W) mm 2.1 (H) mm High luminous flux: 30 lm @250 ma Color : white (warm white) Topr / Tstg: -40 to 100 C Reflow-solderable Standard
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationDetection of S pole Detection of N pole Active "L" Active "H" Nch open-drain output Nch driver built-in pull-up resistor. f C = 250 khz typ.
www.ablic.com www.ablicinc.com S-5732 B Series 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED UNIPOLAR DETECTION TYPE HALL EFFECT SWITCH IC ABLIC Inc., 2016-2017 Rev.2.1_02 This IC, developed by CMOS
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More informationAA2214VRBXS/A-TR-AMT 2.2 x 1.4 mm Surface Mount LED Lamp
2.2 x 1.4 mm Surface Mount LED Lamp DESCRIPTIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use
More information