SPECIFICATION WANMING ELECTRONICS CO.,LTD. Safety Recognized Ceramic Capacitors MENTION INDEX. 1. Applicable safety standard

Size: px

Start display at page:

Download "SPECIFICATION WANMING ELECTRONICS CO.,LTD. Safety Recognized Ceramic Capacitors MENTION INDEX. 1. Applicable safety standard"

Elwin Hardy
5 years ago
Views:

1 SPECIICATION MENTION INDEX 1. Applicable safety stanar 2. Acquire Safety Stanars approval 3. Part Number 4. Marking 5. Rating an Characteristics 6. Specifications an Test Methos 7. Characteristics Data 8. Taping specification 9. Packaging Styles. Packaging Quantity 11. abel an Transport 12. Notification before the moification DIVISTION DATE ISSUED SPEC.NO. TECH.DERT May WM-S08-008B06 WANMING EECTRONICS CO.,TD.

2 HM TYPE -OR(Reinforce Insulation)-IEC ClassX1,Y2 1. Applicable Safety Stanar This specification applies to the VDE, CQC, U,CSA,EC an JET approve ceramic capacitors ist type for antenna-coupling, line-by-pass an across-the-line. An approve by VDE,CQC for IEC secon eition1993/en Acquire Safety Stanar Approval an Recognize number Safety Stanar Stanar No. Recognition No. Rate Voltage VDE-ENEC DIN EN (VDE 0565 Teil1-1): ; EN : ; IEC (e.3) U CQC U GB/T E CQC X1:400V~ Y2:250V~ CSA CSA-E : KC K SU /2A JET J (JISC51-14) 1417-C Part Numbers Examples HM 3 M G 4 B W Type Temperature Characteristics Nominal Capacitance Capacitance Tolerance Symbol ea Style ea Spacing Packaging Internal coe 3.1 Type Type Designation Coe HM Sefety Sanar Recogize Type X1: AC400V, Y2:AC250V WANMING EECTRONICS CO.,TD. PAGE: 1/17

3 3.2 Temperature Characiteristics Coe Coe Temperature Characeristics Cap.Change Of Temp.coeff. Temperature Range S S +350~-00ppm/ B E Y5P Y5U % +20%~-55% -25to85 Y5V +30%~-80% 3.3 Nominal Capacitance Coe Nominal capactiance shall consist of three numerals in the unit of picofara(pf). The first an secon numerals mean the significant figures, an the thir numeral shall represent the number of zeros fllowing the significant figures. Example: Coe Capacitance(p) Capacitance Tolerance Coe K M Tolerance % 20% 3.5 ea style 3.5.1: Straight long lea ( ea Style Coe :A ) Dmax. T max. e :4.0 max. ea coe A2 A3 A min 1.0 : 20 min e 4.0 Max WANMING EECTRONICS CO.,TD. PAGE: 2/17

4 3.5.2 : Straight short lea ( ea Style Coe : B) Dmax. Tmax. ea coe B2 B3 B4 5 5 or epen on client 0.05 e4max. 1 e 4.0 Max : Insie Crimpe Short lea ( ea Style Coe : C ) Dmax. Tmax. ea coe C2 C3 C4 A0: max. A 1.5 Point of support on printe carboar 5 A or epen on client : Insie crimpe long lea ( ea Style Coe : D ) Dmax. Tmax. A0:max Point of support on printe carboar ea coe D2 D3 D4 5 A min 0.05 : 20 min. 1.0 WANMING EECTRONICS CO.,TD. PAGE: 3/17

5 3.5.5 : Outsie crimpe Shart lea ( ea Style Coe: E ) Dmax. Tmax. A0: max. Point of support on printe carboar ea coe E2 E3 E4 5 A or epen on client : : Outsie crimpe long lea ( ea Style Coe: ) Dmax. Tmax. A0:max. : 20 min Point of support on printe carboar ea coe A min : Vertical crimpe long lea ( ea Style Coe: G ) Dmax. Tmax. ea coe G2 G3 G4 4.0max min min WANMING EECTRONICS CO.,TD. PAGE: 4/17

6 3.5.8 : Vertical crimpe short lea ( ea Style Coe: H ) Dmax. Tmax. ea coe H2 H3 H max or epen on client : Duoble crimpe snap lea, (ea Style Coe: M) Dmax ea coe M2 M3 M A 1.5 Point of support on printe carboar 5 H P P A D 8: 1.5, D 8: P H P General Information: 3to30mm PCB max. thickness 1.6mm 3.6 ea Spacing Coe Coe ea Spacing(mm) Packaging Coe Coe B A C D E R Pitch of components(mm) Packaging / Bulk Taping Ammo Pack Taping Reel Pack 3.8 Internal Coe Coe W Meaning Meeting RoSH Halogen-ree & Meeting RoSH WANMING EECTRONICS CO.,TD. PAGE: 5/17

7 4. MARKING (1) Type Designation : HM (2) Nominal Capacitance : (Marke With 3 figures) ex: 222 = 2200p (3) Capacitanve tolerance: K: %, M : 20% (4) Subclass an rate voltage: X1:400V~, Y2:250V~ (5) Manufacture,s trae mark: (6)Manufacturing ate an serial number: (7)Appove Monogram : VDE-ENEC approval mark V : D E CQC approval mark : CQC CSA approval mark : U approval mark : ENEC approval mark : KC approval mark : Marking ex. HM222M V D E X1 :400V~ Y2 :250V~ EN E C CQC WANMING EECTRONICS CO.,TD. PAGE: 6/16

8 5. Rating an Characteristics Type HM ( IEC Sub-class X1,Y2) Rating an Characteristics Part Number Temp. Char. Capacitance (p) Doby Dia. D (mm) Boy Thicknes T (mm) ea Spacing (mm) ea Dia. (mm) ea Package ong Bulk) ea Package Short Bulk) ea Package Taping HMS0 HMS150 HMS220 HMS330 HMS470 HMS680 HMB1K HMB151K HMB181K HMB221K HMB271K HMB331K HMB391K HMB471K HMB561K HMB681K HMB821K HMB2K HME2M HME122M HME152M HME182M HME222M HME272M HME332M HME392M HME472M HM2M HM122M HM152M HM182M HM222M HM272M HM332M HM392M HM472M HM562M HM682M HM3M S S S S S S E/Y5U E/Y5U E/Y5U E/Y5U E/Y5U E/Y5U E/Y5U E/Y5U E/Y5U 5% or % 15 5% or % 22 5% or % 33 5% or % 47 5% or % 68 5% or % ,-% +,-% 180 +,-% 220 +,-% 270 +,-% 330 +,-% 390 +,-% 470 +,-% 560 +,-% 680 +,-% 820 +,-% 00 +,-% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% ,-20% +20,-20% G4B H4B G3C G3C G3C G3C G4C Circle is fille with one to tolerance coe of Capactance..J= 5%. K= %. Three blank columns are fille with the lea an packaging coes. Please refer to the three columns on the right for appropriate coe. WANMING EECTRONICS CO.,TD. PAGE: 7/17

9 6. Specification an test metho 6.1 Operating temperature range:-25 to Test an measurement shall be mae at the stanar conition,(temperature 15 to 35,relative humiity 45 to 75% an atmospheric pressure 86-6 kpa), unless otherwise specifie herein If oubt occurre on the value of measurement, an measurement was requeste by customer capacitors shall be measure at the reference conition(temperature 20 2,relative humiity 60 to 70% an atmospheric pressure 86-6 kpa), unless otherwise specifie herein 6.3 Performance No. Item Specification Testing Metho 1 Appearance an Dimensions No marke efect on appearance from an imensions are within specifie range. The capacitor shall be inspecte by nake eyes for Visible evience of efect. Dimensions shall be measure with slie calipers. 2 Marking To be easily legible. The capacitor shall be inspecte by nake eyes 3 Capacitance Within specifie tolerance. 4 Dissipation actor(d..) Char. Specification The capacitance, issipation factor shall be B,E D. 2.5% measure at 20 2 with 1 0.1kHz.an D. 5.0% AC1 0.1V(r.m.s). S Q C (C 30P) Q 00 (C 30P) 5 Insulation Resistance(I.R.) 000M min. The insulation resistance shall be measure with DC500 50V within 60 5 s of charging. Between ea Wires No failure. The capacitor shall not be amage when AC2600V(r.m.s.) are applie between the lea wires for 60 s. 6 Dielectric Strength Boy Insulation No failure. irst, the terminals of the capacitor shall be connecte together. Then, as shown in igure right, a metal foil shall be closely wrappe aroun the boy of the capacitor to the istance of about 3 to 4 mm from each terminal.then,the capacitor shall be inserteinto a container fille with metal ballsof about 1mm iameter. inally, AC AC2600(r.m.s.) is applie for 60 s between the capacitor lea wires an metal balls. About 3-4mm Metal balls 7 Temperature Characteristics Char. B E S Capacitance Change Within % Within % Within +30% ~-00ppm/ Temperature characteristic guarantee is -25 to +85 The capacitance measurement shall be mae at each step specifie in Table 3. <Table.3> Step Temperature( ) Solerability of eas ea wire shall be solere with uniformly coate on the axial irection over 3/ 4of the circumferential irection. The lea wire of a capacitor shall be ippe into molten soler of for s. The epth of immersion is up to about 1.5 to 2.0mm from the root of lea wires. WANMING EECTRONICS CO.,TD. PAGE: 8/17

10 No. Item Specification Testing Metho 9 Solering Effect Appearance Capacitance Change No marke efect. Within % I.R. 00M min. Dielectric Strength Pre Item 6. As in figure,the lea wires shoul be immerse soler of 350 Capacitor Thermal or up to 1.5 to 2.0mm Screen from the root of terminal 1.5 to 2mm for s ( 1 s Molten for ). Soler Pre-treatment: Capacitor shoul be store at 85 2 for 1 h, then place at *room conition for 24 2 h before initial measurements. Post-treatment: Capacitor shoul be store for 1 to 2hat*room conition. Appearance No marke efect. Vibration Resistance Capacitance D.. Q Within the specifie tolerance. Char. B,E S Specification D.. 2.5% D.. 5.0% Q C* ( C 30p) 1 Q 00 (C 30p) The capacitor shoul firmly be solere to the supporting lea wire an vibrate at a frequency range of to 55Hz,1.5mm in total amplitue, with about a 1 1minute rate of vibration change fromhz to 55Hz an back to Hz. Apply for total of 6 hrs., 2 hrs each in 3 mutually perpenicular irections. Appearance No marke efect. 11 Humiity (Uner Steay State) Capacitance Change D.. Q Char. B E, S Char. B,E S Capacitance Change Within % Within 15% Within 5% Specification D.. 5.0% D.. % Q 275+5/2C* ( C 30p) 1 Q 350 (C 30p) Set the capacitor for h at 40 2 in 90 to 95%relative humiity. Post-treatment: 2 Capacitor shoul be store for 1 to 2hat*room conition. I.R. Dielectric Strength Appearance 3000M min. Per Item 6. No marke efect. Capacitance Change Char. B E, S Capacitance Change Within % Within 15% Within 5% 12 Humiity oaing D.. Q Char. B,E S Specification D.. 5.0% D.. % Q 275+5/2C* ( C 30p) 1 Q 350 (C 30p) Apply the rate voltage for h at 40 2, in 90 to 95% relative humiity. Post-treatment: 2 Capacitor shoul be store for 1 to 2hat *room conition. I.R. 3000M min. Dielectric Strength Per Item 6. *1 C expresses nominal capacitance value(p). *2 Room conition Temperature; 15 to 35, Relative humiity; 45 to 75%, Atmospheric pressure: 86 to 6kPa WANMING EECTRONICS CO.,TD. PAGE: 9/17

11 200 5mm Safety Recognize Ceramic Capacitors No. Item Specification Testing Metho Appearance Capacitance Change I.R. Dielectric Strength No marke efect. Within 20% 3000M min. Per Item 6. Impulse Voltage Each iniviual capacitor shall be subjecte to a 5kV impulses for three times. The time between impulses shoul be not less than S. After the capacitors are applie to life test. 0(%) T1=1.2 T2=50 s=1.67t s 13 ife Discharge Test( ) Per Item 9. 0 T T2 Apply a voltage of table 4 for 00 h at 5+2/0, an relative humiity of 50% max <Table.4> Applie voltage AC425V(r.m.s.), Except that once each hour the voltage is increase to AC00V(r.m.s.)for 0.1s. 14 lame Test The capacitor flame iscontinue as follows. Cycle 1to4 5 Time 30 s max. 60 s max. Post-treatment: Capacitor shall be store for 1 to 2hat *room conition. The capacitor shall be subjecte to applie flame for 15 s an then remove for 15 s until 5 cycles. Capacitor iame Gas Burner (inmm) 15 Robustness of terminations Tensile Bening ea wire shall not cut off. Capacitor shall noit be broken. As a figure,fix the boy of capacitor, apply a tensile weight graually to each lea wire in the raial irection of capacitor up to N an keep it for 1 s. Each lea wire shall be subjecte to 5N weight o an then a 90 ben, at the point of egress,in one irection, return to original position,an then o a 90 ben in the opposite irection at the rate of one ben in 2 to 3 s. W 16 Passive lammability The burning time shall not be exceee the time 30 s. The tissue paper shall not ignite. The capacitor uner test shall be hel in the flame in the position which best promotes burning. Each specimen shall only be expose once to the flame. Time of exposure to flame: 30 s. ength of flame: 12 1mm Gas burner: ength 35mm min. Insie Dia.: mm Outsie Dia.: 0.9mm max. Gas:Butance gas Purity 95% min. Appout 8mm 45 Test specimen Tissue About mm ithck boar *1 C expresses nominal capacitance value(p). * Room conition Temperature; 15 to 35, Relative humiity; 45 to 75%, Atmospheric pressure: 86 to 6kPa WANMING EECTRONICS CO.,TD. PAGE: /17

12 No. Item Specification Testing Metho The capacitor shall be iniviually wrappe in at least one but not more than two complete layers of cheese-cloth.the capacitor shall be subjecte to 20 ischarges. The interval between successive ischarges shall be 5 s. The UAC shall be maintaine for 2 min after the last ischarge. S1 1 2 R Tr C1 C2 C3 Cx S2 UAC 3 4 Ct Ut 17 Active lammability The cheese-cloth shall not be on fire. C1,2 :1 % Oscilloscope C3 : % kv Ct :3 5% kv Cx :Capacitor uner test :use, Rate A 1 to 4 :1.5mH 20% :16A Ro core choke R :0 2% UAC :UR 5% Ux UR :Rate volatage 5kV Ut :Voltage applie to Ct Time 18 Temperature an Immersion Cycle Appearance Capacitance Change D.. I.R. No marke efect. Char. Capacitance Change B Within % E Within 15% S Within 5% Char. B,E S 3000M Specification D. 5.0% Q C (C 30P) Q 350 (C 30P) min. The capacitor shall be subjecte to 5 temperature cycles,then consecutively to 2 immersion cycles. Step Step 1 2 <Temperature cycle> Temperature( ) Time -25+0/-3 30 min Room temp. 3min /-0 30 min Room temp. 3min Cycle time:5 cycle <Immersion cycle> Temperature( ) Time Immersion water +65+5/-0 15 min Clean water Room temp. 15 min Salt water Dielectric Strength Per Item 6. Pre-treatment: Capacitor shall be store at 85 2 for 1 h, thenplace at *room conition for 24 2 h. Post-treatment: Capacitor shall be store for 24 2 h at *room conition. *1 C expresses nominal capacitance value(p). * Room conition Temperature; 15 to 35, Relative humiity; 45 to 75%, Atmospheric pressure: 86 to 6kPa WANMING EECTRONICS CO.,TD. PAGE: 11/17

13 7. Characteristics Data ( Typiccal Example) 7.1 Capacitance-Temperature Characteristics Char B(Y5P) Char:E Y5U Capacitance Change(%) % -% Temperature( ) Capacitance Change(%) % -55% Temperature( ) Char: Y5V % 20 Capacitance Change(%) % Temperature( ) 7.2 Impeance vs. requency Characteristics 0 Impeance( ) 1 0p 220p 470p 00p 2200p 4700p(E) 000p requency (MHz) WANMING EECTRONICS CO.,TD. PAGE: 12/17

14 7.3 eakage Current Characteristics Type HM ( char.) AC voltage : 60Hz Temperature : Type HM (E/Y5U char.) AC voltage : 60Hz Temperature : 25 eakage Current [ma(r.m.s.)] AC voltage [V(r.m.s.)] HMB471K HMB221K HMB1K eakage Current [ma(r.m.s.)] AC voltage [V(r.m.s.)] HME472M HME332M HME222M HME2M Type HM ( char.) AC voltage : 60Hz Temperature : 25 eakage Current [ma(r.m.s.)] HM3M HM472M HM332M HM222M HM2M AC voltage [V(r.m.s.)] WANMING EECTRONICS CO.,TD. PAGE: 13/17

15 8.1 TAPING SPECIICATION 12.7mm pitch/ lea spacing 5.0/ mm taping ea Coe:A2,A3,D2,D3,2,3,G2,G3 A Type D Type Type GType P2 P D S e h 1 h 2 T P1 H W0 W2 H0 W1 W t2 t1 P0 D0 25.4mm pitch/ lea spacing /.0mm taping ea Coe:A3,A4,D3,D4,3,4,G3,G4 A Type D Type Type GType P2 P D S e P1 H W0 W2 H0 W1 W * 4.0 max. H0 ea coe: G P0 D0 Item Pitch of component Pitch of sprocket hole ea spacing ength from hole center to component center ength from hole center to lea Boy iameter Deviation along tape,left or right Carrier tape with Position of sprocket hole ea istance between reference an bottom planes Diameter of sprocket hole Coe P P0 P2 P1 D S W W1 H H0 D0 A2/D2/2/G A3/D3/3/G3 A3/D3/3/G3 A4/D4/4/G See the iniviual prouct specification (ea Coe:A2/A3/A4) (Crimp type) ea iameter 0.05 Total tape thickness t Total thickness, tape an lea wire Boy thickness Portion to cut in case of efect Hol own tape with Hol own tape position Coating extension on lea t2 T W0 W2 e 2.0 max. See the iniviual prouct specification 11.0 max max. (Crimp type:up to the en of crimp) Deviation across tape h1 h2 2.0 max. Protrusion length +0.5 to -1.0 (in mm) WANMING EECTRONICS CO.,TD. PAGE: 14/17

16 8.2 TAPING SPECIICATION 15.0mm pitch/ lea spacing 5.0/ mm taping ea Coe:A2,A3,D2,D3,2,3,G2,G3 A Type D Type Type GType P2 P D S e h 1 h 2 T P1 H W0 W2 H0 W1 W t2 t1 P0 D0 30.0mm pitch/ lea spacing /.0mm taping ea Coe:A3,A4,D3,D4,3,4,G3,G4 A Type D Type Type GType P2 P D S e P1 H * W0 W2 H0 W1 W 4.0 max. H0 ea coe: G P0 D0 Item Pitch of component Pitch of sprocket hole ea spacing ength from hole center to component center ength from hole center to lea Boy iameter Deviation along tape,left or right Carrier tape with Position of sprocket hole ea istance between reference an bottom planes Diameter of sprocket hole Coe P P0 P2 P1 D S W W1 H H0 D0 A2/D2/2/G A3/D3/3/G3 A3/D3/3/G3 A4/D4/4/G See the iniviual prouct specification (ea Coe:A2/A3/A4) (Crimp type) ea iameter 0.05 Total tape thickness t Total thickness, tape an lea wire Boy thickness Portion to cut in case of efect Hol own tape with Hol own tape position Coating extension on lea t2 T W0 W2 e 2.0 max. See the iniviual prouct specification 11.0 max max. (Crimp type:up to the en of crimp) Deviation across tape h1 h2 2.0 max. Protrusion length +0.5 to -1.0 (in mm) WANMING EECTRONICS CO.,TD. PAGE: 15/17

17 9 PACKAGING STYES 9.1 Taping: Reel Packaging max. Electronics max. Unit: mm 9.2 Taping:Ammo Packaging 356max. Electronics 343max. 65max. 9.3 Bulk Polyethylene Bag WANMING EECTRONICS CO.,TD. PAGE: 16/17

18 : Packaging Quantity: (Bulk) 500PCS 11 : abel an Transport Capacitors shall be package prior to shipment so as to prevent amage uring transportation an storage. Shipping carton contains the following information on the label Ex. PART NO : HME332MW ITEM NO : a) Our Part No. b) Quantity c) ot No., D) Manufacturer s Name. OTNO:C A QTY 00pcs IEC (2005) X1Y2 RoSH V D E CQC Electronics 12 : Notification before the moification We,ll previously notify the moifie place of manufacture, Manufacture articles an materials. The operating conitions for the guarantee of this prouct are as shown in the specification. Please note the Wanming Electronics co.,t. Shall not be responsible for a failure an/or abnormality which are cause by use uner the conitions other than the aforesai operating conitions. WANMING EECTRONICS CO.,TD. PAGE: 17/17

RELIABILITY TEST DATA SAFETY STANDARD RECOGNIZED CERAMIC CAPACITOR

DATA No. : RTD-E76EA RELIABILITY TEST DATA SAFETY STANDARD RECOGNIZED CERAMIC CAPACITOR MURATA PN : DE2E3KH12M*** PAGE 1. INITIAL ( Cap., D.F., I.R. )... 1 2. TEMPERATURE CHARACTERISTIC... 2 3. ROBUSTNESS