CCQ-800 AutoFocimeter. CCQ-800 AutoFocimeter. Operating Instruction. R/No.: CCQ8.0ESM REV: 3.45

Transcription

1 R/No.: CCQ8.0ESM REV: 3.45 CCQ-800 AutoFocimeter CCQ-800 AutoFocimeter Operating Instruction Add: 5 Danlong Road, Nan'an District, Chongqing,400060,China Tel : (00 86)-(0) Fax: (00 86)-(0) Authorized European Repretative: Deutsche Augenoptik AG Add: Ziegeleistr , 75417, Muehlaker, Germany In order that you can use this product more safely and get full play to its functions and features, please read the operating instructions carefully before using this unit and keep it properly.

2

3

4

5 CCQ-800 Auto Focimeter

6 Operating Instruction

7 CCQ-800 Auto Focimeter EC REP SN:

8 Operating Instruction

9 CCQ-800 Auto Focimeter

10 Operating Instruction

11 CCQ-800 Auto Focimeter

12 Operating Instruction

13 CCQ-800 Auto Focimeter

14 Operating Instruction

15 CCQ-800 Auto Focimeter

16 Operating Instruction

17 CCQ-800 Auto Focimeter

18 Operating Instruction

19 CCQ-800 Auto Focimeter

20 Operating Instruction

21 CCQ-800 Auto Focimeter

22 Operating Instruction

23 CCQ-800 Auto Focimeter

24 Operating Instruction

25 CCQ-800 Auto Focimeter

26 Operating Instruction

27 CCQ-800 Auto Focimeter

28 Operating Instruction

29 CCQ-800 Auto Focimeter

30 Operating Instruction

31 CCQ-800 Auto Focimeter

32 Operating Instruction

33 CCQ-800 Auto Focimeter

34 Operating Instruction No.: RIGHT O 0.00 U 0.00 <SINGLE> SPH CYL AXS PSM LEFT O 0.00 U 0.00 No : <SINGLE> SPH CYL AXS PSM LEFT O 0.00 U 0.00 YEASN CCQ-800 YEASN CCQ-800 No.: <CONTACT> RIGHT LEFT SE SPH CYL AXS 0 O 0.00 U 0.00 PSM O 0.00 U 0.00 YEASN CCQ-800 No.: <SINGLE> RIGHT LEFT SPH CYL AXS 0 O 0.00 U 0.00 PSM O 0.00 U PD YEASN CCQ-800

35 CCQ-800 Auto Focimeter No.: <CONTACT> RIGHT LEFT SE SPH CYL O 0.00 U 0.00 AXS PSM 0 O 0.00 U 0.00 YEASN CCQ-800 No.: <SINGLE> RIGHT SPH CYL LEFT AXS 0 O 0.00 U 0.00 PSM O 0.00 U PD YEASN CCQ-800 No.: NAME:YEASN CHONGQING.CHINA <SINGLE> RIGHT O 0.00 U 0.00 SPH CYL AXS PSM LEFT O 0.00 U 0.00 No : NAME:YEASN CHONGQING.CHINA <SINGLE> SPH CYL AXS PSM LEFT O 0.00 U 0.00 YEASN CCQ-800 YEASN CCQ-800

36 Operating Instruction

37 CCQ-800 Auto Focimeter

38 Operating Instruction

39 CCQ-800 Auto Focimeter

40 Operating Instruction

41 CCQ-800 Auto Focimeter

42 Operating Instruction

43 CCQ-800 Auto Focimeter

44 Operating Instruction

45 CCQ-800 Auto Focimeter

46 Operating Instruction

47 CCQ-800 Auto Focimeter

48 Operating Instruction

49 CCQ-800 Auto Focimeter

50 Operating Instruction

51 CCQ-800 Auto Focimeter

52 Operating Instruction Guidance and MANUFACTURER S declaration ELECTROMAGNETIC EMISSIONS The CCQ-800 AUTO FOCIMETER is intended for use in the electromagnetic environment specified below. The customer or the user of the CCQ-800 AUTO FOCIMETER should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment guidance RF emissions CISPR 11 Group 1 The CCQ-800 AUTO FOCIMETER uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. RF emissions CISPR 11 Class A Harmonic emissions IEC Voltage fluctuations/ flicker emissions IEC Not applicable Not applicable Guidance and manufacturer s declaration electromagnetic immunity The CCQ-800 AUTO FOCIMETER is intended for use in the electromagnetic environment specified below. The customer or the user of the CCQ-800 AUTO FOCIMETER should assure that it is used in such an environment. IMMUNITY test Electrostatic discharge (ESD) IEC Electrical fast transient/burst IEC Surge IEC Voltage dips, short interruptions and voltage variations on power supply input lines IEC Power frequency (50/60 Hz) magnetic field IEC IEC test level ± 6 kv contact ± 8 kv air ± 2 kv for power supply lines ± 1 kv for input/output lines ± 1 kv line(s) to line(s) ± 2 kv line(s) to earth <5%UT (>95 % dip in UT) for 0,5 cycle 40%UT (60%dipinUT) for 5 cycles 70%UT (30%dipinUT) for 25 cycles <5%UT (>95 % dip in UT) for 5 s Compliance level ± 2,4, 6 kv contact ± 2,4,8 kv air ± 2 kv for power supply lines ± 1 kv for input/output lines ± 1 kv line(s) to line(s) ± 2 kv line(s) to earth <5 % UT (>95 % dip in UT) for 0,5 cycle 40%UT (60 % dip in UT) for 5 cycles 70%UT (30 % dip in UT) for 25 cycles <5 % UT (>95 % dip in UT) for 5 s 3 A/m Not applicable Electromagnetic environment guidance Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30 %. Mains power quality should be that of a typical commercial or hospital environment. Mains power quality should be that of a typical commercial or hospital environment. Mains power quality should be that of a typical commercial or hospital environment. If the user of the [ME EQUIPMENT OR ME SYSTEM] requires continued operation during power mains interruptions, it is recommended that the CCQ-800 AUTO FOCIMETER be powered from an uninterruptible power supply or a battery. Power frequency magnetic fields should be at levels characteristic of a typical location in a typical commercial or hospital environment.

53 CCQ-800 Auto Focimeter Guidance and manufacturer s declaration electromagnetic immunity The CCQ-800 AUTO FOCIMETER is intended for use in the electromagnetic environment specified below. The customer or the user of the CCQ-800 AUTO FOCIMETER] should assure that it is used in such an environment. IMMUNITY test Conducted RF IEC IEC test level 3 Vrms 150 khz to 80 MHz outside ISM bandsa Compliance level 3V Electromagnetic environment guidance Portable and mobile RF communications equipment should be used no closer to any part of the CCQ-800 AUTO FOCIMETER, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter. Radiated RF IEC V/m 80 MHz to 2,5 GHz 3V/m Recommended separation distances between portable and mobile RF communications equipment and the CCQ-800 AUTO FOCIMETER The CCQ-800 AUTO FOCIMETER is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the CCQ-800 AUTO FOCIMETER can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the CCQ-800 AUTO FOCIMETER as recommended below, according to the maximum output power of the communications equipment. Rated maximum output powerof transmitter W Separation distance according to frequency of transmitter m 150 khz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2,5 GHz 0, ,