74LCX138 Low Voltage 1-of-8 Decoder/Demultiplexer with 5V Tolerant Inputs

Size: px

Start display at page:

Download "74LCX138 Low Voltage 1-of-8 Decoder/Demultiplexer with 5V Tolerant Inputs"

Elinor Cole
5 years ago
Views:

1 74LCX138 Low Voltage 1-of-8 Decoder/Demultiplexer with 5V Tolerant Inputs General Description The LCX138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding. The multiple input enables allow parallel expansion to a 1-of-24 decoder using just three LCX138 devices or a 1-of-32 decoder using four LCX138 devices and one inverter. The 74LCX138 is fabricated with advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. Ordering Code: Features n 5V tolerant inputs n 6.0 ns t PD max, 10 µa I CCQ max n Power down high impedance inputs and outputs n Supports live insertion/withdrawal n 2.0V 3.6V V CC supply operation n ±24 ma output drive n Implements patented noise/emi reduction circuitry n Functionally compatible with 74 series 138 n Latch-up performance exceeds 500 ma n ESD performance: Human body model > 2000V Machine model > 200V Order Number Package Number Package Description 74LCX138M M16A 16-Lead (0.150" Wide) Small Outline Package, JEDEC 74LCX138SJ M16D 16-Lead Small Outline Package, SOIC EIAJ 74LCX138MTC MTC16 16-Lead Thin Shrink Outline Package, TSSOP Devices also available in Tape and Reel. Specify by appending suffix letter X to the ordering code. Connection Diagram Pin Descriptions Pin Assignment for SOIC and TSSOP Pin Names A 0 A 2 E 1 E 2 E 3 O 0 O 7 Description Address Inputs Enable Inputs Enable Input Outputs December LCX138 Low Voltage 1-of-8 Decoder/Demultiplexer with 5V Tolerant Inputs DS Fairchild Semiconductor Corporation DS

2 Functional Description The LCX138 high-speed 1-of-8 decoder/demultiplexer accepts three binary weighted inputs (A 0,A 1,A 2 ) and, when enabled, provides eight mutually exclusive active-low outputs (O 0 O 7 ). The LCX138 features three Enable inputs, two active-low (E 1,E 2 ) and one active-high (E 3 ). All outputs will be HIGH unless E 1 and E 2 are LOW and E 3 is Truth Table Inputs HIGH. The LCX138 can be used as an 8-output demultiplexer by using one of the active LOW Enable inputs as the data input and the other Enable inputs as strobes. The Enable inputs which are not used must be permanently tied to their appropriate active-high or active-low state. Outputs E 1 E 2 E 3 A 0 A 1 A 2 O 0 O 1 O 2 O 3 O 4 O 5 O 6 O 7 H X X X X X H H H H H H H H X H X X X X H H H H H H H H X X L X X X H H H H H H H H L L H L L L L H H H H H H H L L H H L L H L H H H H H H L L H L H L H H L H H H H H L L H H H L H H H L H H H H Logic Diagram L L H L L H H H H H L H H H L L H H L H H H H H H L H H L L H L H H H H H H H H L H L L H H H H H H H H H H H L H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial DS Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. 2

3 Absolute Maximum Ratings (Note 1) Symbol Parameter Value Conditions Units V CC Supply Voltage 0.5 to +7.0 V V I DC Input Voltage 0.5 to +7.0 V V O DC Output Voltage 0.5 to V CC Output in High or Low State (Note 2) V I IK DC Input Diode Current 50 V I < GND ma I OK DC Output Diode Current 50 V O < GND ma +50 V O > V CC I O DC Output Source/Sink Current ±50 ma I CC DC Supply Current per Supply Pin ±100 ma I GND DC Ground Current per Ground Pin ±100 ma T STG Storage Temperature 65 to +150 C Recommended Operating Conditions (Note 3) Symbol Parameter Min Max Units V CC Supply Voltage Operating V Data Retention V I Input Voltage V V O Output Voltage HIGH or LOW State 0 V CC V I OH /I OL Output Current V CC = 3.0V 3.6V ±24 ma V CC = 2.7V ±12 T A Free-Air Operating Temperature C t/ V Input Edge Rate, V IN = 0.8V 2.0V, V CC = 3.0V 0 10 ns/v Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The Recommended Operating Conditions table will define the conditions for actual device operation. Note 2: I O Absolute Maximum Rating must be observed. Note 3: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol Parameter Conditions V CC T A = 40 C to +85 C Units (V) Min Max V IH HIGH Level Input Voltage V V IL LOW Level Input Voltage V V OH HIGH Level Output Voltage I OH = 100 µa V CC 0.2 V I OH = 12 ma V I OH = 18 ma V I OH = 24 ma V V OL LOW Level Output Voltage I OL = 100 µa V I OL = 12 ma V I OL = 16 ma V I OL = 24 ma V I I Input Leakage Current 0 V I 5.5V ±5.0 µa I OFF Power-Off Leakage Current V I or V O = 5.5V 0 10 µa I CC Quiescent Supply Current V I = V CC or GND µa 3.6V V I 5.5V ±10 µa I CC Increase in I CC per Input V IH = V CC 0.6V µa 3

4 AC Electrical Characteristics Symbol Parameter T A = 40 C to +85 C, C L = 50pF, R L = 500Ω Units V CC = 3.3V ± 0.3V V CC = 2.7V Min Max Min Max t PHL Propagation Delay ns t PLH A n to O n t PHL Propagation Delay ns t PLH E 3 to O n t PHL Propagation Delay ns t PLH E 1 or E 2 to O n t OSHL Output to Output Skew (Note 4) 1.0 ns t OSLH 1.0 Note 4: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH to LOW (t OSHL ) or LOW to HIGH (t OSLH ). Dynamic Switching Characteristics Symbol Parameter Conditions V CC T A = 25 C Units (V) Typical V OLP Quiet Output Dynamic Peak V OL C L = 50 pf, V IH = 3.3V, V IL = 0V V V OLV Quiet Output Dynamic Valley V OL C L = 50 pf, V IH = 3.3V, V IL = 0V V Capacitance Symbol Parameter Conditions Typical Units C IN Input Capacitance V CC = Open, V I = 0V or V CC 7 pf C OUT Output Capacitance V CC = 3.3V, V I = 0V or V CC 8 pf C PD Power Dissipation Capacitance V CC = 3.3V, V I = 0V or V CC,f=10 MHz 25 pf 4

5 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead (0.0150" Wide) Molded Small Outline Package, JEDEC Package Number M16A 16-Lead Small Outline Package EIAJ (SJ) Package Number M16D 5

6 74LCX138 Low Voltage 1-of-8 Decoder/Demultiplexer with 5V Tolerant Inputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE- VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMI- CONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 16-Lead Thin Shrink Small Outline Package (MTC) Package Number MTC16 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Fairchild Semiconductor Corporation Americas Customer Response Center Tel: Fairchild Semiconductor Europe Fax: +49 (0) europe.support@nsc.com Deutsch Tel: +49 (0) English Tel: +44 (0) Italy Tel: +39 (0) Fairchild Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: Fax: National Semiconductor Japan Ltd. Tel: Fax: Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.

74F138 1-of-8 Decoder/Demultiplexer

74F138 1-of-8 Decoder/Demultiplexer General Description The F138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding.