Structure and mechanism of the ECF-type ABC transporter for thiamin Erkens, Guus Bjorn

Transcription

1 University of Groningen Structure and mechanism of the ECF-type ABC transporter for thiamin Erkens, Guus Bjorn IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite from it. Please check the document version below. Document Version Publisher's PDF, also known as Version of record Publication date: 2011 Link to publication in University of Groningen/UMCG research database Citation for published version (APA): Erkens, G. B. (2011). Structure and mechanism of the ECF-type ABC transporter for thiamin Groningen: s.n. Copyright Other than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons). Take-down policy If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. Downloaded from the University of Groningen/UMCG research database (Pure): For technical reasons the number of authors shown on this cover page is limited to 10 maximum. Download date:

2 Chapter 1 An introduction to ECF- and ABC-transporters parts of this chapter are based on: J. Bacteriol. (2009) 191:42-51 Summary All forms of life separate their cellular contents from the external medium by a lipid bilayer (the cell membrane) which is poorly permeable for hydrophilic molecules. Nonetheless, translocation of numerous hydrophilic molecules across the membrane is essential for life. To enable transport at useful rates, hydrophobic proteins are embedded in the membrane that facilitate the import and export of various compounds. One of the largest superfamilies of transport proteins are ATP Binding Cassette (ABC) transporters (27). Members of the ABC transporter superfamily are involved in the translocation of substrates across biological membranes, either as importer or as exporter. The energy for transport is provided by ATP hydrolysis in Nucleotide Binding Domains (NBDs). ABC transporters are characterized by a conserved subunit architecture consisting of two NBDs and two Transmembrane Domains (TMDs) which together form a single translocation pore. ABC transporters involved in import are found only in prokaryotes and usually require an additional extracellular or periplasmic water-soluble protein to scavenge the substrate: the Substrate Binding Protein (SBP). However, the ECF (Energy Coupling Factor) transporter family is a recently discovered class of ABC importers involved in uptake of vitamins that does not requires SBPs (108). The basic architecture of ECF transporters is identical to that of ABC transporters (Two NBDs and two TMDs), but the mechanism of substrate binding differs. In ECF transporters, substrate binding takes place in one of the TMDs (the EcfS subunit or S-component) which forms an integral part of the ECF transporter complex. The second transmembrane protein in ECF transporters (the EcfT subunit) together with two NBDs (named EcfA in ECF transporters) forms an energizing module that couples ATP hydrolysis to substrate translocation. The energizing module can interact with several different S-components to actively transport a broad range of chemically different substrates (108,130). S- components bind their substrates with high affinity (picomolar to nanomolar dissociation constants) and can, in the absence of the energizing module, be expressed and purified as stable monomers ((34), chapter 4). Recent work has lead to the determination of crystal structures for the riboflavin- and thiamin-specific S-components, RibU (155) 1

3 and ThiT (chapter 5 of this thesis) respectively. Although unrelated at the sequence level (14% identity), there is a remarkable similarity in their overall structure that is probably connected to the mechanism of S-component recognition by the energizing module. This chapter will give an overview of the literature on ECF transporters and describes their recent discovery. The focus will be on their general characteristics and relation to ABC transporters. Finally, a short background on thiamin (vitamin B 1 ) is given. Vitamin transport in Gram-positive prokaryotes Although a number of reports on vitamin transport by prokaryotes have been published in the past fifty years, detailed biochemical- and mechanistic studies are scarce. Much of this work for Gram-positive bacteria has been performed by Gary Henderson et al. In a series of publications during the late 1970s and early 1980s, the biochemistry of active folate-, thiamin- and biotin-transport in Gram-positive bacteria was described in great detail (58-64,76). Early investigations focused on the folate-binding protein from Lactobacillus casei (61,62). Expression of this protein could be induced when the cells were cultivated in growth medium supplemented with limiting amounts of folate. The rate of in vivo folate transport correlated well with these expression levels, indicating that the concentration of folate-binding protein was limiting for folate transport. Substrate bound with high affinity (K D =36 nm) to cells expressing the folate-binding protein and from these cells the folate-binding protein could be extracted with detergents. This observation was the first indication that the folate-binding protein was an integral membrane protein or part of a membrane protein complex. Subsequent purification of the detergent extract enabled analysis of the amino acid content and SDS-PAGE (SDS-Poly Acrylamide Gel Electrophoresis) of the isolated folate-binding protein. The protein was found to contain few charged or polar amino acids and had a molecular mass of ~25 kda. Similar to the folate-binding protein, a thiamin-binding protein was expressed when L. casei cells were grown under thiamin limiting conditions (60). These cells were shown to rapidly accumulate radiolabeled thiamin that was directly converted intracellular to thiaminpyrophosphate (TPP). Thiamin transport was energy dependent, but in de-energized cells high affinity (K D <10 nm) thiamin binding could still be observed. Although the transport of folate, thiamin and later biotin was shown be mediated by three different proteins, the transport of one vitamin was non-competitively inhibited by the addition of a second vitamin in the transport assay (64). For instance, the addition of thiamin in folate transport assays decreased the folate transport rates by ~45%. Intriguingly, the inhibition was observed only if the expression of the thiamin-binding protein was induced. The inhibition was competitive with regard to the concentration of the binding proteins. To explain the unusual transport kinetics, it was proposed that the individual vitamin-binding-proteins had to compete for a shared component that would couple 2

4 energy to substrate translocation. For this reason, the unknown component was named the energy coupling factor. Further investigations demonstrated that (at least for folate) the energy for transport was almost certainly provided by ATP hydrolysis (63). Identification of the folate- and thiamin-binding proteins The investigations on vitamin transport in L. casei were conducted in the pre-genomics era and the genes encoding the transport proteins were not identified at that time. In the past few years, the molecular identities of various components have been elucidated. Some of the experiments leading to the identification are described in chapter 3. In this chapter a brief overview is presented. The genome sequence of L. casei (which had become available in 2006), was searched for genes encoding proteins with comparable properties to the folate- and thiamin-binding proteins, such as size and amino acid composition (chapter 3). The corresponding genes were named folt and thit because of their involvement in folate and thiamin binding. Cells overexpressing FolT or ThiT bound (6S)-folinic acid and thiamin respectively, but did not support transport of the vitamins. Purified FolT and ThiT were shown to bind their substrates with high ( M) affinity. There was a superficial resemblance of FolT and ThiT to the riboflavin transporter RibU from Lactococcus lactis although no sequence similarity could be detected between any of these proteins. RibU, ThiT and FolT are all predicted to have 5-6 transmembrane segments, and a protein mass of ~20 kda. RibU could bind riboflavin and FMN with high affinity, but did not support transport of these substrates (16,34). It was suggested that an additional component would be required for RibU to function as a transporter. Identification of the energy coupling factor Biotin transport in Rhodobacter capsulatus is mediated by the protein complex BioMNY (55). BioM is homologous to the NBDs belonging to ABC transporters, BioN and BioY are integral membrane proteins. Substrate specificity is conferred to the transporter trough BioY (which is not related to ThiT, FolT or RibU) but again there is a superficial resemblance in size and number of predicted transmembrane helices. Similar to other prokaryotic importers, biotin transport is fuelled by ATP hydrolysis. BioY could be expressed separate from the other proteins in the BioMNY complex and in in vivo experiments with E. coli cells overexpressing only the bioy gene, biotin transport was still observed. A similar complex organization as in BioMNY was found for the ATP dependent Ni 2+ and Co 2+ transporters NikMNQO and CbiMNQO (109). Like BioNMY their substrate specificity is conferred by one of the transmembrane subunits (NikM and 3

5 CbiM respectively). The NikO and CbiO proteins are analogous to BioM (a NBD) and NikQ and CbiQ are analogous the BioN, the second membrane subunit. There was a surprising similarity between BioM, NikO and CbiO, although the substrate binding proteins (BioY, NikM and CbiM) were very different. A link between BioY, FolT and ThiT was made when an orthologue of the bioy gene was found in the L. casei genome, but without the additional biomn (ecfat) genes. Instead, an operon encoding BioMNhomologues was found at a different location in the genome that was not linked to a gene coding for a substrate specific protein. From this observation it was hypothesized that the BioM like proteins were the elusive energy coupling factor that interacts with various substrate specific proteins. A large-scale bioinformatics analysis was performed to search for additional vitamin-binding proteins and putative energy coupling factors (108). A total of 365 genomes were searched for operons containing a typical ATPase of the ABC transporter family (now named A-component or EcfA) a BioN-like membrane protein (T-component of EcfT), that was accompanied by a second membrane protein that could be a substrate specific component (S-component, such as BioY, FolT, ThiT or RibU). This search resulted in the identification of 432 gene cassettes encoding energizing (AT) modules, often with duplicated A components (labeled EcfA and EcfA in those cases). Of these energizing modules, 335 were similar to NikMNQ, CbiMNQO or BioMNY in the sense that the S-component formed an operon with the energizing module. The remaining 97 energizing modules were found without adjacent S-component genes, but these genomes encoded various candidate S-components at other genomic locations. It was predicted that in those cases the energizing module is shared among the different S-components and that such an energizing module might be the sought-after energy coupling factor from L. casei. The results are summarized in figure 1. In total, 21 different putative S-components families were described (table 1). A prediction of their substrate specificity could be made based on the genomic context: in many cases, the expression of S-components was regulated by a riboswitch sequence (see below) or the S-component genes co-localized with substrate-specific repressor proteins or biosynthesis clusters. The proposed energizing module links all the transporter subunits that were identified together and has a central function in coupling energy to substrate translocation. Therefore, this novel family of transporters was named Energy Coupling Factor (ECF) transporters. The energizing module showed a clear relationship with ABC transporters through the ATP hydrolyzing EcfA components. Therefore, the general properties of ABC transporters will be discussed first. 4

6 Figure 1: distribution and comperative genomics analysis of ECF transporters Comparative genomic analysis of the identified transporter families including their domain compositions, names, predicted substrate specificities, and example gene identifications. Substrate-specific integral membrane components (S) are shown by black rectangles, conserved transmembrane components (T) are shown by blue rectangles, and ATPase domains (A) are shown by red circles. Examples of genome context evidence (e.g., gene co-regulation or co-localization) supporting the predicted transporter function are shown on the right. This figure is a modified version of a previously publshed one (108).

7 Table 1: an overview of S-components and their substrate specificity protein name substrate(s) confirmed (Y/N) ThiT Thiamin (vitamin B 1 ), TMP, TPP, pyrithiamin reference Y chapter 3,4 RibU Riboflavin (vitamin B 2 ), FMN Y (16,34) FolT Folic acid (vitamin B 9 ), (6S)-folinic acid Y chapter 3 BioY Biotin (vitamin B 7 ) Y (55) PanT Pantothenic acid (vitamin B 5 ) Y (95) QueT Queuosine precursor N NiaX Niacin (vitamin B 3 ) Y (130) HmpT YkoE Hydroxymethylpyrimidine (thiamin precursor) Hydroxymethylpyrimidine (thiamin precursor) ThiW Thiazole (thiamin precursor) N MtsT Methionine precursor N TrpP Tryptophan N LipT Lipoate N CblT Cobalamin (vitamin B 12 ) precursor N CbrT Cobalamin (vitamin B 12 ) precursor N QrtT Queuosine precursor N PdxT Pyridoxine (vitamin B 6 ) N MtaT Methylthioadenosine N NikM Nickel ions Y (109) CbiM Cobalt ions Y (109) HtsT unknown - N N ATP-Binding Cassette (ABC) transporters in prokaryotes Classification and function The group of ABC transporters forms the largest superfamily of transport proteins. ABC systems are represented in genomes from organisms in all kingdoms of life and perform an amazing variety of functions (27). Some ABC transporters have evolved to perform nontransport functions (which will not be discussed here), but the majority is involved in the translocation of an enormous variation of substrates across various biological membranes. 6

8 The hallmark of ABC transporters are the ATP hydrolyzing proteins or domains: the Nucleotide Binding Domains (NBDs). The NBDs are remarkably conserved between ABC transporters, even if they perform very different functions. ABC transporters that translocate substrates to the cytoplasm are ABC importers, whereas ABC exporters work in the opposite direction. In contrast to the well-conserved NBDs, the TMDs are polyphyletic (144) and can thus adopt very different folds (see figure 2). Prokaryotic ABC transporters There is a wealth of biochemical (and to a lesser extent) structural data available on prokaryotic ABC transporters. Many important processes involve ABC transporters, such as import of nutrients (11), virulence (56) and multi-drug resistance (87). Characteristically, ABC-importers require an additional protein for substrate recognition: the Substrate Binding Protein (SBP). SBPs are structurally similar water-soluble proteins (9). In Gram-negative bacteria, SBP s are expressed freely in the periplasm where they can scavenge their substrates. A large conformation change takes place upon substrate binding, which results in closing of the binding site and trapping of the bound substrate. This mechanism is described as the Venus-flytrap model (42). Gram-positive bacteria (that lack a confined periplasmic space) often have their SBP s genetically fused to the TMD s or attached to the membrane via a lipid anchor (26). The substrate-bound SBP is recognized by the transporter and stimulates ATP hydrolysis (30,84), the free energy released in this process is used to open the SBP and transport the substrate. Bacterial ABC efflux systems are often employed for the export of cell surface components or extrusion of toxic compounds. Although the transport direction is opposite to that of ABC-importers, their membrane orientation is identical (the NBDs are placed in the cytoplasm). Substrate recognition does not require a SBP but the exact mechanism is still being debated. Structure of ABC transporters In the past decade, crystal structures of full-length ABC transporters became available for various ABC transporters. The list includes the eukaryotic exporter P-glycoprotein (2), the prokaryotic exporter Sav1866 (31) and prokaryotic importer BtuCD (85). An overview of ABC transporter structures is given in figure 2. It becomes clear that there is large structural and size variation in the transmembrane domains. Nevertheless, insights from these structures have generated a general mechanism of transport: it was already known from biochemical data and structures of isolated NBDs that large conformational changes occur when ATP is bound and hydrolyzed. The structure of the ABC transporter BtuCD (85) showed for the first time a structural element named the coupling helix that couples these changes to conformational changes in the TMDs. Coupling helices are short helical segments of the TMDs that interact directly with a groove on the 7

9 surface of the NBDs. The segments show little or no sequence conservations, which makes it difficult to locate the coupling helix in the amino acid sequence of TMDs. Additional structures of ABC transporters confirmed the crucial role of the coupling helix (2,31,68,72,97,146). outside cytoplasm Figure 2: structures of ECF- and ABC transporters (a) Structure of the S-components RibU and ThiT with the structure of the EcfA dimer from Thermotoga maritima. The gray box indicates the expected position of EcfT, for which no structure is available. (b) Structures of ABC importers. (c) Structures of ABC exporters. The horizontal lines roughly indicate the boundaries of the lipid bilayer, PDB accession codes are depicted below the protein names. ATP binding and hydrolysis ATP binding and hydrolysis takes place in the NBDs of ABC transporters. The functional unit of NBDs is a dimer, which is often reflected in the genetic arrangement of ABC transporter genes. NDBs can be found as part of a half transporter in which one gene encodes a fusion of the TMD and NBD and thus comprises one half of the functional transporter. Alternatively, the NBDs can be encoded by two different genes that code 8

10 for a heterodimer, one single gene that codes for a proteins forming a homodimer, or a genetic fusion of two NBD genes encoding a covalent dimer. The mechanistic basis for the NBD dimer is the ATP binding site, which is formed on the dimer interface and constructed with contributions from both monomers. The dimeric arrangement of NBDs is reflected in a pseudo two-fold symmetry of the full complex: the transporter is always built up of two identical or structurally similar segments. The amino acid sequence of NBDs is conserved throughout the whole ABC transporter family and beyond (52). Although sequences have diverged and additional domains have evolved multiple times (10), there are a number of mechanistically important sequence motifs shared by all NBDs. These are the Walker A motif (involved in phosphate coordination via a Mg 2+ ion and adenosine binding), Walker B motif (involved in ATP hydrolysis), ABC signature sequence LSGGQ (involved in phosphate binding), the H- loop (involved in coordination of active site residues and dimer stabilization) and the Q-loop (part of the interaction site for the coupling helix). For most ABC transporters, the ATP/substrate stoichiometry is not known. The dimeric arrangement suggests that two ATP molecules are hydrolyzed during each transport cycle. This stoichiometry has indeed been confirmed by in vitro experiments with the glycine betaine transporter OpuA (101). But for other transporters different stoichiometries have been found (3,11,28,39,84,90,91,113,114,121,122), ranging from 1 to 50 ATP molecules per translocated substrate. It seems from these results that the actual stoichiometry is variable and might depend on the substrate that is transported. Larger substrates such as peptides or small proteins may require more ATP hydrolysis for transport than small molecules. ECF transporters form a subclass of ABC transporters There are many similarities between ECF- and ABC-transporters. For instance, the EcfA subunits are related to the NBDs of ABC transporters (see chapter 2) and have all the mechanistical important sequence motifs that are typical for ABC transporters (chapter 5). Furthermore, the stoichiometry of several ECF-transporter has been verified experimentally, showing that the four subunits (EcfA, EcfA, EcfT and EcfS) are arranged in a 1:1:1:1 stoichiometry (130) which agrees well with the basic architecture of ABC transporters. Nevertheless, the mechanism of substrate binding which involves the membrane inserted S-components is very different from that of ABC transporters. Based on the genetic organization of the genes coding for S-components, a distinction is made between ECF transporters from class I and II (37). For transporters in class I, the S-component gene is co-localized with the energizing module in a single operon. These transporters are believed to be dedicated to one specific S-component. Class II ECF transporters have their energizing module encoded in an operon, without an 9

11 adjacent gene encoding for an S-component. One or more S-component genes can be found at alternative locations in the genome and all of which may interact with the same energizing module. Often, representatives of both classes are found in a single genome. ECF transporters are found in diverse prokaryotic genomes (Gram-positive, Gram-negative and Archea), but class II systems are particularly abundant in Firmicutes; a phylum of Gram-positive bacteria that includes many human pathogens (see chapter 2). So far, no example has been presented of a eukaryotic ECF transporter. Structure and function of S-components Substrate feedback controls expression Many of the S-component genes are regulated in some way by the intracellular concentration of their substrate (108). There are two types of regulation: regulation by substrate specific repressor proteins (e.g. BirA (110) for the biotin specific S-component BioY) or regulation by riboswitches (e.g. the TPP riboswitch (151) that regulates ThiT expression). Riboswitches are encoded in the DNA region preceding the regulated gene. After DNA transcription, an mrna molecule is produced with both the riboswitch sequence and the gene. The riboswitch sequence then adopts a specific secondary structure that is able the recognize and bind a substrate (e.g. TPP in case of the TPP riboswitch) (154). When the riboswitch is charged with substrate, protein expression can either be inhibited because a terminator helix is formed (which results in premature termination of transcription) or because the ribosome binding sequence becomes inaccessible (the mrna is prevented from binding to the ribosome). This mechanism provides a direct coupling between the intracellular concentration of a specific metabolite and the expression of S-components. As the intracellular concentration of a substrate drops, more uncharged riboswitches appear and thus the expression increases. Structure of S-components Recently the crystal structures of the S-component RibU from Staphylococcus aureus (155) and ThiT from L. lactis (chapter 5) were determined. Although significant sequence similarity between these proteins is absent, a similar fold was observed for both proteins (figure 3). Their structure is built up of six hydrophobic transmembrane helices with short connecting loops. There is a large variation between the lengths and tilt of the helices; helix 5 and 6 are particularly long and cross the membrane at a steep angle, whereas helix 2 only spans half of the membrane. In both structures, the major part of the binding site is formed by conserved amino acids in helix 5 and 6 and the cytoplasmic loop connecting them. Structural divergence between ThiT and RibU is most evident in helices 4 and 5. For instance, the position of helix 4 and 5 relative to the other helices is very different. In addition, helix 4 in ThiT has a very unusual secondary structure. It is 10

12 Figure 3: structures of the S-components for thiamin (ThiT) and riboflavin (RibU) X-ray structures of ThiT (left, PDB: 3RLB) and RibU (right, PDB: 3P5N). The gray rectangle indicates the position of the membrane, the transmembrane helices are numbered 1-6. ThiT and RibU are depicted in the same orientation. built up of an α-helical segment, followed by a π-bulge, a second α-helical segment and then continues as a long 3 10 helix. These structural elements are characterized by their backbone hydrogen bonding pattern. In a π-helix, C=O groups from one amino acid form a hydrogen bond with the N-H moieties of a second amino acids that is separated by four residues (i i+5), in a 3 10 helix this separation is two residues (i i+3), whereas in an α-helix the hydrogen bond partners are separated by three residues (i i+4). In the RibU structure, helix 4 is a regular α-helix. Surprisingly, neither ThiT, nor RibU appears to have a coupling helix ((155), chapter 5), the structural motif that couples ATP hydrolysis to substrate transport in ABC transporters. Since ECF transporters have two EcfA subunits (or NBDs), two coupling helices are also expected. In classical (non-ecf) ABC transporters, each ABC transporter TMD therefore has one coupling helix available for interaction with the NBD. To explain the missing coupling helix, is has been proposed that the EcfT component might have two coupling helices to interact with both NBDs (chapter 5). A cytoplasmic domain from the subunit EcfT that was found to be crucial for the integrity of the ECF complex (95) could be the location of these coupling helices. A function for S-components in the absence of the energizing module? The substrate feedback loop results in maximum expression of the S-components when the intracellular concentration of their substrates is low. For the energizing module, the 11

13 expression pattern is not known, but the absence of specific regulator sequences and co-localization with essential house-keeping genes suggests that it is probably expressed at a constant level. As a result, cells are capable of quickly increasing the uptake of ECF substrates when their intracellular concentration drops. The increase in abundance of a particular S-component leads to the formation of more Energizing module/s-component complexes of that type and thus more transported substrate. It has been demonstrated for at least one S-component (FolT from L. casei) that significant amounts of FolT can be isolated from cells grown under folate limiting conditions without apparent copurification of the energizing module (62). This observation may suggest that high levels of isolated S-components exist in the membrane at some point, which apparently is advantageous for the organism. A possible explanation is that S-components are also capable of transport in the absence of the energizing module, as has been observed for the biotin specific S-component BioY (55). Alternatively, expression of isolated S- components may allow organisms to scavenge any available vitamin in the case of extreme scarcity. Once the substrate is bound to an S-component, a complex can be formed with the energizing module and transport will follow subsequently. Such a mechanism might provide a selective advantage for bacteria expressing isolated S-components. 12

14 Outline of this thesis The ECF transport system for thiamin (vitamin B 1 ) was studied with several biochemical and biophysical techniques. This thesis focuses on the S-component subunit that provides the substrate specificity for thiamin (ThiT). ECF transporters are linked to ABC transporters trough their Nucleotide Binding Domains (NBDs) but have a very different mechanism of substrate recognition. To determine the relation between ECF- and ABC transporters, a phylogenetic analysis of the NBD sequences from ECF- and ABC transporters is presented in chapter 2. The results indicate that ECF transporters do not have a special position within the ABC transporter superfamily. In addition, structurally important sequence motifs in S- components are analyzed. Based on the analysis it is proposed that S-components share a structurally conserved core that likely forms the interaction platform for the energizing module. Chapter 3 describes the identification of the S-components for thiamin (ThiT) and folate (FolT) from L. casei. These proteins are involved in unusual transport kinetics that were described for vitamin transport in L. casei during the late 1970s and early 1980s. At that time the genes encoding these proteins were not identified, complicating a more detailed biochemical analysis. Using amino acid compositions determined 30 years ago, the genes were now located in the genome of L. casei. Furthermore, biochemical evidence is provided that the corresponding proteins were indeed responsible for the recognition of thiamin and folate. In chapter 4, the biochemical characterization of L. lactis ThiT is described. The protein was overexpressed in the membranes of L. lactis and purified in a substratefree and substrate-bound conformation. High affinity binding (picomolar to nanomolar dissociation constants) of several substrates was assayed. A number of mutants were prepared to gain insight in the chemistry of high affinity binding. Static light scattering coupled to refractive index measurements were applied to demonstrate that ThiT is a monomer in detergent solution. This was the first determination of the oligomeric state of an isolated S-component. In vivo transport experiments confirmed that ThiT is required for thiamin transport, but in its isolated form only binds thiamin. The high resolution crystal structure of ThiT is presented in chapter 5. The structure provides insight in the mechanism of substrate binding and confirms many of the findings described in chapter 4. Using this structure and the structure of the S-component RibU from S. aureus, a model could be constructed for the recognition of different S- components by the energizing module. Furthermore, in vivo experiments confirm that indeed the energizing module is required for thiamin transport. 13

15 Chapter 6 is a brief discussion about structural variation in membrane proteins. Here, it is argued that structural similarity is a very strong indicator of homology, even in the absence of sequence similarity. Membrane proteins that share the same fold like ThiT and RibU, therefore most likely originate from a single ancestral protein. Furthermore, the consequences of structural similarity between S-components are discussed in relation to the transport mechanism for ECF transporters. 14

16 Appendix: the historical background of thiamin Thiamin (vitamin B 1, figure 4a) was first described by Christiaan Eijkman as an essential nutrient found in the outer layers of unpolished (brown) rice that was able to cure beriberi in chicken (36). Its isolation led to the discovery of vitamins, for which the Nobel Prize in Physiology and Medicine was awarded in Thiamin was purified for the first time in 1911 and given the classification vitamine because of its vital importance and the presence of an amino group (48). Later the name vitamine was changed to vitamin since subsequently identified vitamins were not always found to be amines. The crystal structure of thiamin was determined in 1934 (150). Figure 4 Chemical structures of (a) thiamin and (b) thiamin-pyrophosphate. Thiamin is used as a cofactor in many enzymes, but always in the form of thiaminpyrophosphate (TPP, figure 4b). The diphosphate moiety is not required for catalysis but believed to function as a specific anchoring group that allows binding to the enzyme (117). This is required, because specific interactions with the aminopyrimidine or thiazole rings would probably interfere with the mechanism of catalysis. When the crystal structure of thiamin became available, it was assumed that the active group for catalysis would be the amino moiety. This model was proven to be wrong in 1957, when it was demonstrated that the active group was the C2 atom in the thiazole ring (14,15). The acidity of this carbon atom is unusually high (pk a ~18) and in the ionized (carbanion) state, thiamin is capable of performing decarboxylation reactions, albeit at a slow rate. As an enzyme-bound cofactor, the carbanion state is highly stabilized (for instance by assuming a V-shaped conformation (92)) and therefore the catalysis rate increases by several orders of magnitude. 15

17 Thiamin is an important compound for all forms of life. Many organisms are dependent on the uptake of thiamin for their survival, although bacteria can have biosynthetic pathways (111). TPP is used as a cofactor in various enzymes performing decarboxylation reactions (47). These enzymes are involved in essential processes such as the citric acid cycle and pentose phosphate pathway. 16