ASAHI Hall Effect ICs

Transcription

1 ASAHI Hall Effect ICs

2 IMPORTANT NOTICE These products and their specifications are subject to change without notice. When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of the products. Descriptions of external circuits, application circuits, software and other related information contained in this document are provided only to illustrate the operation and application examples of the semiconductor products. You are fully responsible for the incorporation of these external circuits, application circuits, software and other related information in the design of your equipments. AKM assumes no responsibility for any losses incurred by you or third parties arising from the use of these information herein. AKM assumes no liability for infringement of any patent, intellectual property, or other rights in the application or use of such information contained herein. Any export of these products, or devices or systems containing them, may require an export license or other official approval under the law and regulations of the country of export pertaining to customs and tariffs, currency exchange, or strategic materials. AKM products are neither intended nor authorized for use as critical components Note1) in any safety, life support, or other hazard related device or system Note2), and AKM assumes no responsibility for such use, except for the use approved with the express written consent by Representative Director of AKM. As used here: Note1) A critical component is one whose failure to function or perform may reasonably be expected to result, whether directly or indirectly, in the loss of the safety or effectiveness of the device or system containing it, and which must therefore meet very high standards of performance and reliability. Note2) A hazard related device or system is one designed or intended for life support or maintenance of safety or for applications in medicine, aerospace, nuclear energy, or other fields, in which its failure to function or perform may reasonably be expected to result in loss of life or in significant injury or damage to person or property. It is the responsibility of the buyer or distributor of AKM products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the above content and conditions, and the buyer or distributor agrees to assume any and all responsibility and liability for and hold AKM harmless from any and all claims arising from the use of said product in the absence of such notification.

3 INDEX GENERAL INFORMATIONS 1. BASIC PRINCIPLES P1 2. PRODUCT LINE-UP P3 3. DEFINITION OF TERMS P4 4. APPLICATIONS P5 5. PRECAUTIONS P9 6. RELIABILITY P11 7. SELECTION INDEX P12 PRODUCTS 1. AK-series P13 2. EM-series P33 3. EW-series P47 4. EZ-series P75 REFERENCES Design of switches using Hall effect ICs P79 Current specifications in effect as of January, We reserves the right to revise the specifications without notice.

4 GENERAL INFORMATIONS 1.BASIC PRINCIPLES Circuit structure of Hall Effect IC The Hall effect IC consists of Hall Element and signal conditioning circuit to convert the Hall element output into a digital output.the two devices are mounted in a single package with three active terminals(cc, GND and OUT) There are two choices of power consumption, continuous excitation with standard current consumption and pulsed excitation at low duty cycles that significant reduce the average current consumption. (Continuous excitation type) Two types of output circuits are available: open collector type and a internal pull-up resistor type. The open collector type Hall effect IC is generally used to connect an external resistor RL as shown in Figure 2. The normal operating temperature for this type is -30 C to +115 C. Figure 1 Circuit composition of Hall effect IC Figure 2 Connection of Pull-up Resistor RL (Pulse excitation type(micro power)) The Hall element is driven by the electric current pulse shown in Figure 4, and the output is as shown in Figure 5. As for output when it is not driven, the immediately preceding state is maintained. Usually, the period of the pulse drive is predetermined in each grade of Hall effect IC and cannot be controlled externally. The normal operating temperature range for this type is -30 C to +85 C. Figure 3 Circuit composition Figure 4 Pulse excitation electric current consumption (example for EW Figure 5 Operation timing diagram

5 Operation of Hall effect IC (Unipolar Hall Effect Switch) On/off is switched depending on the intensity of the magnetic field of the S-pole of the magnet. This type is primarily used for position detection of a magnet. (Omnipolar Hall Effect Switch) On/off is switched depending on the intensity of the magnetic field in S-pole or N-pole of the magnet. This type is primarily used for position detection of a magnet.(it is not dependent on the direction of the magnetic pole.) (Bipolar Hall Effect Latch) On/off is switched when the magnetic fields at the N-pole and the S-pole are applied alternately. This type is primarily used to detect revolution speed. 2

6 GENERAL INFORMATIONS 2.PRODUCT LINE-UP Unipolar Hall Effect Switch Unipolar Hall Effect Switch-Micropower Operation Unipolar Hall Effect Latch -125 Operation, Hall Element Continuous Excitation Omnipolar Hall Effect Switch-Micropower Operation Bipolar Hall Effect Latch Bipolar Hall Effect Latch-125 Operation, Hall Element Continuous Excitation 3

7 4 3.DEFINITION OF TERMS

8 GENERAL INFORMATIONS 4.APPLICATIONS Application of Hall effect IC. Please note that these basic examples are given only for general reference, and represent no recommendation or warranty of any nature relating to actual utilization or infringement of proprietary rights. Position Sensor Hall Moter(Rotor) Hall Moter(Index) alve Window Shade Fluid Level Meter 5

9 S N S N S S 6

10 GENERAL INFORMATIONS 7

11 8

12 GENERAL INFORMATIONS 5.PRECAUTIONS 1oltage Do not exceed maximum ratings. Observe recommended operating conditions. Strictly avoid surge voltage and electrostatic discharge during storage, handling and mounting of the Hall effect IC. When designing circuits, always consider temperature; characteristics of semiconductors change with ambient temperature. 2Lead Forming(EW-5**) In case of lead bending, the following conditions are required to be maintained: 1)No mechanical stress is on resin package. 2)No torque is on leads. 3)No tension is recommended. The following condition(fig.1) must be met Figure.1 Terminal Strength 3Soldering conditions (1)Dip solderring conditions: Within range shown in Figure 2. (2)Reflow soldering: Maximum conditions as shown in Figure 3. (3)Hand-soldering: Solder the leads to PC board at the point (part from the body) at 260 for 10seconds or 350 for less than 3 seconds. Please contact AKM to obtain the latest information about Superminimoldtype (4)Use of resin flux is recommended. Reflow Prole F igure.2 (Reference)Conditions of Dip Soldering Figure.3 (Refere nce)conditions of Reflow Prole 9

13 4Cleaning, removal of flux residue (1)Solvents: Ethanol, isopropyl alcohol (IPA) (2)Temperature: Max. 50 (3)Time: Max. 5minutes (4)Ultrasonic cleaning: Frequency Max. 45kHz Power Max. 40W/l 5Storage conditions The Hall effect ICs must be stored at an appropriate temperature(5 to 35 )and humidity (40 to 85%RH). Keep them away from chlorine and corrosive gas. 6Long-term storage Long-term storage may result in poor lead solderability and degraded electrical performance even under proper conditions. 10

14 GENERAL INFORMATIONS 6.RELIABILITY All Hall effect ICs are subjected to qualification requirements prior to released to production. AKM put the periodical qualification test on each part. RELIABILITY TEST TERMS 11

15 7.SELECTION INDEX 1.Type Unipolar Hall Effect Switch a Omnipolar Hall Effect Switch b Bipolar Hall Effect Latch c 2.Operating point (Bop) Low Sensitivity Bop TYP.10 d Standard Sensitivity Bop TYP.6(5) e High Sensitivity Bop TYP.3 f Ultra High Sensitivity Bop TYP.1.5 g 3.Package SMT 4-Series h SMT 6-Series i SMT 1-Series j SON AK87-Series k SIP 5-Series l SIP 7-Series m 4.Supply oltage 1.85 n 3 o 5 p 12 q 24 r 12

16 Monolithic Hall Effect ICs AK-series AK8771 AK8771 is ultra-small Hall effect IC of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 1.6~5.5 Power down Function Ultra High Sensitivity Bop:1.8 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SON Features Precision Bipolar Hall Effect Latch Power manageability through "PDN" pin Current consumption in Power down mode is less than 1μA Ultra small SON package : t0.37mm, Halogen free Operational Characteristics Functional Block Diagram OSC Item Function Timing ogic Hall lement Chopper S AMP Schmitt Trigger atch ogic Output Stage 13

17 AK8771 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. Absolute Maximum Ratings c Item symbol Min Max Unit ote Power supply oltage DD Output current Input oltage Input current Storage temperature IOUT IN IIN TSTG DD Recommended Operating Conditions ma ma OUT PDN PDN Item symbol Min Typ Max Unit Power supply oltage Operating temperature DD Ta lectrical Characteristics Ta DD Item symbol Min Typ Max Unit ote g Current consumption IDD1 1 PDN=0 Current consumption IDD PDN=3 PD input current IIN 1 1 PD input H oltage IH 0.7DD PD input oltage IL 0.3 High leel output oltage OH DD0.4 IOUT 0.5mA ow leel output oltage PD mode transition time PD mode transition time OL TPD1 TPD IOUT 0.5mA k Magnetic Characteristics Ta DD Item symbol Min Typ Max Unit Operating point Bop Releasing point Brp H y s t e r e s i s Bh 3.6 Magnetic Characteristics Ta DD Item symbol Min Typ Max Unit Operating point Releasing point H y s t e r e s i s Bop Brp Bh n o p 14

18 15 AK8771

19 AK c g k n o p 16

20 Monolithic Hall Effect ICs AK-series AK8772 AK8772 is ultra-small Hall effect IC of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 1.6~5.5 Power down Function Ultra High Sensitivity Bop:1.8 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SON Features Precision Bipolar Hall Effect Latch Power manageability through "PDN" pin Current consumption in Power down mode is less than 1μA Low current consumption at active mode : less than avg. 150μA@DD=3 Ultra small SON package : t0.37mm, Halogen free 17

21 AK8772 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c DD IOUT ma OUT IN 0.3 DD0.3 PDN IIN ma PDN TSTG DD Ta g IDD1 IDD2 IIN IH IL OH OL TPD1 TPD2 TPD3 TPD4 TW DD DD ms 100 PDN=0 PDN=DD,Average IOUT IOUT 0.5mA 0.5mA DD k Bop Brp Bh n o Bop Brp Bh p 18

22 19 AK8772

23 AK c g k n o p 20

24 Monolithic Hall Effect ICs AK-series AK8788 AK8788 is ultra-small Hall effect IC of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Omnipolar Hall Effect Switch Supply oltage 1.6~5.5 Hall Element Pulse Excitation High Sensitivity Bop:3 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SON Features High sensitive omnipoler operation Micropower operation Typ.4.5μA (average : DD=1.85) Ultra small SON package : t0.37mm Halogen free 21

25 AK8788 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. b DD IOUT TSTG ma DD Ta f IDD IDD Average Average, DD 5.5 OH DD0.4 IOUT 0.5mA OL 0.4 IOUT 0.5mA TPD ms TPD IDD OH OL TPD1 TPD2 DD ms IOUT 0.5mA IOUT 0.5mA k BopS BopN BrpS BrpN BhS,BhN n o p BopS BopN BrpS BrpN BhS,BhN

26 23 AK8788

27 AK b f k n o p 24

28 Monolithic Hall Effect ICs AK-series AK8789 AK8789 is ultra-small Hall effect IC of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Unipolar Hall Effect Switch Two output for S and N-pole Supply oltage 1.6~5.5 Hall Element Pulse Excitation High Sensitivity Bop:2.5 Output CMOS Two output for S and N-pole Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SON Features High sensitive omnipolar operation Dual output Micropower operation Typ.6.5μA(average:DD=1.85) Ultra small SON package : t0.37mm Halogen free 25

29 AK8789 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. a DD IOUT TSTG ma DD Ta f IDD Average OH DD0.4 IOUT 0.5mA OL 0.4 IOUT 0.5mA TPD ms TPD BopN BopS BrpN BrpS k BhN,BhS BopN BopS BrpN BrpS BhN,BhS n o p 26

30 27 AK8789

31 AK8789 a f k n o p 28

32 Monolithic Hall Effect ICs AK-series AK8788A AK8788A is ultra-small Hall effect IC of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Omnipolar Hall Effect Switch Supply oltage 1.6~5.5 Hall Element Pulse Excitation High Sensitivity Bop:3 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SON Features High sensitive omnipoler operation Micropower operation Typ.4.5μA (average : DD=1.85) Ultra small SON package : t0.37mm Halogen free 29

33 AK8788A Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. b DD IOUT TSTG ma DD Ta f IDD IDD Average Average DD5.5 OH DD0.4 IOUT0.5mA OL 0.4 IOUT0.5mA TPD ms TPD IDD OH OL TPD1 TPD2 DD ms Average IOUT0.5mA IOUT0.5mA k BopS BopN BrpS BrpN BhS,BhN n o p BopS BopN BrpS BrpN BhS,BhN

34 31 AK8788A

35 AK8788A b f k n o p 32

36 Monolithic Hall Effect ICs EM-series EM-1011 EM-1011 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 3.5~18 Hall Element Continuous Excitation High Sensitivity Bop:3 Output Open Drain Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT DD ISINK 0 12 ma OUT TSTG ma DD Topr Bop Brp Bh SAT OUT="L"ISINK=10mA ILEAK OUT="H" 1 A IDD OUT="H" ma =10Gauss 33

37 EM-1011 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c f j p q

38 Monolithic Hall Effect ICs EM-series EM-1711 EM-1711 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 1.6~5.5 Power down Function Ultra High Sensitivity Bop:1.8 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT DD IN DD0.1 IIN TSTG ma IOUT ma DD Topr Bop Bop Brp 1.8 Brp Bh 3.6 Bh 3.6 IH 0.7DD IL 0.3 OH Io=0.5mA DD0.4 OL Io=0.5mA 0.4 IDD1 1 A IDD ma I 1 1 A TPD1 PDN 100 s TPD2 PDNActive 100 s =10Gauss 35

39 EM-1711 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c g j n o p 36

40 Monolithic Hall Effect ICs EM-series EM-1712 EM-1712 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 1.6~5.5 Power down Function Ultra High Sensitivity Bop:1.8 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT DD IN DD0.1 IIN TSTG ma IOUT ma DD Topr TPD3 TW PDNH ms Bop TPD4 PDNH Brp Bh IH IL OH OL Io=0.5mA Io=0.5mA 0.7DD DD Bop Brp Bh IDD1 IDD A A I 1 1 A TPD1 PDN (36.6) s TPD2 PDNActive 100 s =10Gauss 37

41 EM-1712 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c g j n o p 38

42 Monolithic Hall Effect ICs EM-series EM-1771 EM-1771 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Unipolar Hall Effect Switch Supply oltage 1.6~5.5 Hall Element Pulse Excitation High Sensitivity Bop:3 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT DD IOUT ma TSTG DD Topr Bop 1.4* Bop Brp * Brp Bh 0.3* * Bh Tp ms OH Io=0.5mA DD 0.4 OL Io=0.5mA 0.4 IDD 4 9 =10Gauss 39

43 EM-1771 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. a f j n o p 40

44 Monolithic Hall Effect ICs EM-series EM-1781 EM-1781 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Omnipolar Hall Effect Switch Supply oltage 1.6~5.5 Hall Element Pulse Excitation High Sensitivity Bop:3 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT DD IOUT ma TSTG DD Topr BopS IBopNI BrpS IBrpNI BhS IBhNI 1.4* * * 1.5* BopS IBopNI BrpS IBrpNI BhS IBhNI Tp ms OH Io=0.5mA DD 0.4 OL Io=0.5mA 0.4 IDD =10Gauss 41

45 EM-1781 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. b f j n o p 42

46 Monolithic Hall Effect ICs EM-series EM-1791 EM-1791 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(5000pcs/reel) Unipolar Hall Effect Switch Two output for S and N-pole Supply oltage 1.6~5.5 Hall Element Pulse Excitation High Sensitivity Bop:2.5 Output CMOS Two output for S and N-pole Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT DD IOUT TSTG ma DD Topr Bop1 Bop2 * *1.4 Bop1 IBop2I Brp1 IBrp2I Brp1 Brp2 1.2 * * Bh1 IBh2I 0.5 Bh1,Bh2 0.5 Tp ms OH OL IDD Io=0.2mA Io=0.2mA DD A =10Gauss 43

47 EM-1791 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. a f j 44 n o p

48 Monolithic Hall Effect ICs EM-series EM-6781 EM-6781 is ultra-small Hall effect ICs of a single silicon chip composed of Hall element and a signal processing IC. Shipped in packet-tape reel(3000pcs/reel) Omnipolar Hall Effect Switch Supply oltage 1.6~5.5 Hall Element Pulse Excitation High Sensitivity Bop:3 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT DD IOUT TSTG ma DD Topr BopS IBopNI BrpS IBrpNI BhS IBhNI 1.4* * * 1.5* BopS IBopNI BrpS IBrpNI BhS IBhNI Tp ms OH Io=0.5mA DD0.4 OL Io=0.5mA 0.4 IDD =10Gauss 45

49 EM-6781 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. b f i n o p 46

50 Hybrid Hall Effect ICs EW-series EW-400 EW-400 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 4.5~18 Hall Element Continuous Excitation Low Sensitivity Bop:10 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT O(off) 0.3 CC CC ISINK ma TSTG CC CC Topr Bop CC= Brp CC= Bh CC= SAT CC=12,OUT''L'',ISINK =10mA 0.4 ILEAK CC=12,OUT''H'', OUT=12 1 A ICC CC=12,OUT''H'' 8 ma =10Gauss 47

51 EW-400 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c d h p q 48

52 Hybrid Hall Effect ICs EW-series EW-403 EW-403 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 2.5~5.5 Hall Element Continuous Excitation Low Sensitivity Bop:10 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT O(off) 0.3 CC CC ISINK ma TSTG CC CC Topr Bop CC= Brp CC= Bh CC= SAT CC=3,OUT''L'', ISINK =10mA 0.4 ILEAK CC=3,OUT''H'',OUT=3 1 A ICC CC=3,OUT''H'' 8 ma =10Gauss 49

53 EW-403 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c d h o p 50

54 Hybrid Hall Effect ICs EW-series EW-410B EW-410B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 3~26.4 Hall Element Continuous Excitation High Sensitivity Bop:3 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT CC CC O(off) ISINK 0.3 CC 0 10 ma TSTG CC Topr Bop CC= Brp CC= Bh CC= SAT CC=12,OUT''L'', ISINK =10mA 0.4 ILEAK CC=12,OUT''H'',OUT=12 1 A ICC CC=12,OUT''H'' 5 6 ma =10Gauss 51

55 EW-410B Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c f h 5.5 o p q r 52

56 Hybrid Hall Effect ICs EW-series EW-413 EW-413 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(5000pcs/reel) Bipolar Hall Effect Latch Supply oltage 2.5~5.5 Hall Element Continuous Excitation High Sensitivity Bop:3 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT CC CC O(off) ISINK 0.3 CC 0 15 ma TSTG CC Topr Bop CC= Brp CC= Bh CC=3 2 6 SAT CC=3,OUT''L'', ISINK =10mA 0.4 ILEAK CC=3,OUT''H'',OUT=3 1 A ICC CC=3,OUT''H'' 8 ma =10Gauss 53

57 EW-413 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c f h o p 54

58 Hybrid Hall Effect ICs EW-series EW-453 EW-453 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(5000pcs/reel) Unipolar Hall Effect Switch Supply oltage 2.5~5.5 Hall Element Continuous Excitation Low Sensitivity Bop:10 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT CC CC O(off) ISINK 0.3 CC 0 15 ma TSTG CC Topr Bop CC= Brp CC= Bh CC= SAT CC=3,OUT''L'', ISINK =10mA 0.4 ILEAK CC=3,OUT''H'',OUT=3 1 A ICC CC=3,OUT''H'' 8 ma =10Gauss 55

59 EW-453 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. a d h o p 56

60 Hybrid Hall Effect ICs EW-series EW-463 EW-463 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(5000pcs/reel) Unipolar Hall Effect Switch Supply oltage 2.5~5.5 Hall Element Continuous Excitation High Sensitivity Bop:3 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT O(off) 0.3 CC CC ISINK ma TSTG CC CC Topr Bop CC=3 3 6 Brp CC= Bh CC= SAT CC=3,OUT''L'',ISINK =10mA 0.4 ILEAK CC=3,OUT''H'',OUT=3 1 A ICC CC=3,OUT''H'' 8 ma =10Gauss 57

61 EW-463 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. a f h o p 58

62 Hybrid Hall Effect ICs EW-series EW-500 EW-500 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in bulk(500pcs/bag) Bipolar Hall Effect Latch Supply oltage 4.5~18 Hall Element Continuous Excitation Low Sensitivity Bop:10 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SIP O(off) 0.3 CC CC ISINK ma TSTG CC CC Topr Bop CC= Brp CC= Bh CC= SAT CC=12,OUT''L'', ISINK =10mA 0.4 ILEAK CC=12,OUT''H'',OUT=12 1 A ICC CC=12,OUT''H'' 8 ma =10Gauss 59

63 EW-500 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems c d l p q 60

64 Hybrid Hall Effect ICs EW-series EW-610B EW-610B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(3000pcs/reel) Bipolar Hall Effect Latch Supply oltage 3~26.4 Hall Element Continuous Excitation High Sensitivity Bop:3 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT O(off) 0.3 CC CC ISINK ma TSTG CC CC Topr Bop CC= Brp CC= Bh CC= SAT CC=12,OUT''L'',ISINK =10mA 0.4 ILEAK CC=12,OUT''H'',OUT=12 1 A ICC CC=12,OUT''H'' 5 6 ma =10Gauss 61

65 EW-610B Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c e i o p q r 62

66 Hybrid Hall Effect ICs EW-series EW-632 EW-632 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(3000pcs/reel) Bipolar Hall Effect Latch Supply oltage 2.2~18 Hall Element Continuous Excitation High Sensitivity Bop:3 Output Pull-up resistor Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT CC CC O(off) ISINK 0.3 CC 0 12 ma TSTG CC Topr Bop CC= Brp CC= Bh CC=12 6 SAT CC=12,OUT''L'' 0.4 ICC CC=12,OUT''H'' 8 ma d CC=12,OUT''H'' 20 m RL 6 14 k 1=10Gauss 63

67 EW-632 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c f i o p q 64

68 Hybrid Hall Effect ICs EW-series EW-650B EW-650B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(3000pcs/reel) Unipolar Hall Effect Switch Supply oltage 3~26.4 Hall Element Continuous Excitation Standard Sensitivity Bop:6 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT CC CC O(off) ISINK 0.3 CC 0 10 ma TSTG CC Topr Bop CC= Brp CC= Bh CC= SAT CC=12,OUT''L'', ISINK =10mA 0.4 ILEAK CC=12,OUT''H'',OUT=12 1 A ICC CC=12,OUT''H'' 5 6 ma =10Gauss 65

69 EW-650B Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. a e i o p q r 66

70 Hybrid Hall Effect ICs EW-series EW-6672 EW-6672 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in packet-tape reel(3000pcs/reel) Unipolar Hall Effect Switch Supply oltage 2.4~3.3 Hall Element Pulse Excitation Ultra High Sensitivity Bop:1.5 Output CMOS Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT DD IOUT ma TSTG CC Topr Bop Bop 1.0* Brp Brp * Bh Bh 0.1* * Tp ms OH Io=1.0mA DD 0.4 OL IDD Io=1.0mA =10Gauss 67

71 EW-6672 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. a g i o 68

72 Hybrid Hall Effect ICs EW-series EW-710B EW-710B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in bulk(500pcs/bag) Bipolar Hall Effect Latch Supply oltage 3~26.4 Hall Element Continuous Excitation High Sensitivity Bop:3 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SIP CC CC O(off) ISINK 0.3 CC 0 10 ma TSTG CC Topr Bop CC= Brp CC= Bh CC= SAT CC=12,OUT''L'', ISINK =10mA 0.4 ILEAK CC=12,OUT''H'',OUT=12 1 A ICC CC=12,OUT''H'' 5 6 ma =10Gauss 69

73 EW-710B Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. 30 c f m o p q r 70

74 Hybrid Hall Effect ICs EW-series EW-732 EW-732 is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in bulk(500pcs/bag) Bipolar Hall Effect Latch Supply oltage 2.2~18 Hall Element Continuous Excitation High Sensitivity Bop:3 Output Pull-up resistor Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SIP O(off) 0.3 CC CC ISINK ma TSTG CC Topr Bop CC= Brp CC= Bh CC=12 6 SAT CC=12,OUT''L'' 0.4 ICC CC=12,OUT''H'' 8 ma d CC=12,OUT''H'' 20 m RL 6 14 k 1=10Gauss 71

75 EW-732 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. c f m o p q 72

76 Hybrid Hall Effect ICs EW-series EW-750B EW-750B is composed of a Ultra-high sensitive InSb Hall element and a signal processing IC chip in a package. Shipped in bulk(500pcs/bag) Unipolar Hall Effect Switch Supply oltage 3~26.4 Hall Element Continuous Excitation Standard Sensitivity Bop:6 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SIP CC O(off) ISINK 0.3 CC 0 10 ma TSTG CC Topr Bop CC= Brp CC= Bh CC= SAT CC=12,OUT''L'',ISINK =10mA 0.4 ILEAK CC=12,OUT''H'',OUT=12 1 A ICC CC=12,OUT''H'' 5 6 ma =10Gauss 73

77 EW-750B Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. a e m o p q r 74

78 Hybrid Linear Hall Effect ICs EZ-series EZ-410 Shipped in packet-tape reel(5000pcs/reel) EZ-410 is composed of an InAs Hall Element and a signal processing IC chip in a package Bipolar Hall Effect Latch Supply oltage 3.8~24 Hall Element Continuous Excitation Standard Sensitivity Bop:5 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT CC O(off) ISINK 0.3 CC 0 10 ma TSTG CC Topr ILEAK OUT=''H'' 1 ILEAK OUT=''H'' 10 SAT OUT=''L'', IOUT =10mA 0.4 SAT OUT=''L'' 0.8 ICC OUT=''H'' 5 9 ICC OUT=''H''

79 EZ-410 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. This product contains galium arsenide(gaas).handling and discarding precautions required. c Bop Bop Brp Brp Bh Bh e h p q

80 Hybrid Linear Hall Effect ICs EZ-series EZ-470 Shipped in packet-tape reel(5000pcs/reel) EZ-470 is composed of an InAs Hall Element and a signal processing IC chip in a package Unipolar Hall Effect Switch Supply oltage 2~24 Hall Element Continuous Excitation Ultra Low Sensitivity Bop:26 Output Open Collector Notice:It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. SMT CC CC O(off) ISINK 0.3 CC 0 10 ma TSTG CC Topr ILEAK OUT=''H'' 10 Bop SAT OUT=''L'', IOUT =10mA 0.8 Brp ICC OUT=''H'' 3 6 Bh

81 EZ-470 Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. This product contains galium arsenide(gaas).handling and discarding precautions required. a h o p q 78