KSH Bevel gear high speed screw jack
|
|
- Rodger Gibson
- 6 years ago
- Views:
Transcription
1 KSH evel gear hgh speed screw jack Product descrpton evel gear hgh speed screw jack KSH1 to KSH3 The bevel gear hgh speed screw jack type KSH s a modular desgn n 3 szes. Each sze s avalable wth two ratos; :1 and 3:1. All gear housngs are cubc n form and are machned on all faces. They are manufactured from GG 5 grey cast ron. bevel gear hgh speed screw jacks are dstngushed from precson screw jacks HSG seres by the use of spral bevel gear sets. These bevel gears are of Klngelnberg form and are lapped together n pars. Hgh qualty alloy steel s used n ther manufacture and they are case hardened. Robust rollng bearngs support the nput shaft and the lftng spndle axs gvng a long and trouble free lfe. bevel gear hgh speed screw jacks provde a lftng speed of up to m/mn wth ball screw and 13.5 m/mn wth trapezodal spndle. Due to the hgh effcency of the ntegral bevel gears a hgh overall effcency s provded.(ca. 75 % for ball screw and ca. 40 % wth trapezodal spndle). For all stuatons provdes a comprehensve range of accessores. All drve components are compatble wth one another and wth a wde range of applcatons. products are our own manufacture and ncorporate our very hgh qualty standards. If you have further questons please consult our local sales offce or our factory engneers. We are always ready to assst wth or advse about our products and ther applcatons. Please make use of our wde experence
2 KSH KSH KSH KSH KSH evel gear hgh speed screw jack Contents lst KSH bevel gear hgh speed screw jack wth rotatng and translatng spndles Versons rotatng verson (R), translatng verson (SA, SVA) 003 Dmensons KSH1 to KSH3 trapezodal spndle 004 rotatng and translatng verson (R, SA, SVA) Dmensons KSH1 to KSH3 ball screw spndle translatng verson (SA, SVA) 006 Dmensons KSH1 to KSH3 ball screw spndle rotatng verson (R) 008 Flanged nut dmensons flanged nut to DIN 651 for ball screws rotatng verson (R) 0 Calculatons for KSH1 to KSH3 see our catalogue for HSG (for HSG and KSH) s
3 KSH evel gear hgh speed screw jack Versons Rotatng verson (R) In rotatng verson (R) lnear moton of the nut results from rotatonal moton n the spndle. The spndle s axally fxed n the screw jack gearbox. Rotatng spndle Verson R Trapezodal spndle all screw spndle C35 / St stanless steel Cf 53 Translatng verson (SA, SVA) In translatng verson (SA, SVA) the lnear moton results from movement of the spndle. In the translatng spndle verson the spndle moves axally through the screw jack gearbox. It s necessary to ensure that the spndle s fxed aganst rotaton. Overtravel of the spndle s lmted by a travel lmter (SA). Use of the rotaton preventon devce prevents potental spndle rotaton (SVA). Translatng spndle Verson SA Verson SVA Trapezodal spndle all screw spndle C35 / St stanless steel Cf
4 KSH evel gear hgh speed screw jack Dmensons KSH1 to KSH3 Trapezodal spndle rotatng and translatng versons (R, SA, SVA) bevel gear hgh speed screw jacks wth trapezodal spndles are normally suppled flled wth ol. The ol level glass, ol fller and dran plug are normally on face D. Devatons from standard can be specfed when orderng. The output s usually at face. Addtonal nput and output shafts can be provded on faces D, E and F. Versons: Rato: :1, 3:1 R: Rotatng spndle Lubrcaton: Ol SA: Translatng spndle wth travel lmter SVA: Translatng spndle wth rotaton preventon and travel lmter Materal: GG5 Accessores: see catalogue accessores for HSG and KSH Questonnare: see HSG catalogue s 3 34 Ø D 5 j6 L= length of the runnng nut; see catalogue accessores for HSG and KSH d H 8, H 9 H 7 H 7 Z= L +stroke+l 5 H 1 H 3 H 7 L 6 L 7 stroke L L 8 L 9 D KSH Ø d 1 h9 A Ø d h9 Verson R C H 5, H 6 Ø d 4 f7 Ø H 4 Z= L +Stroke Stroke+L 14 L 11 L 1 Stroke L 13 D KSH D 5 A Verson SA, SVA C d 3 H 19, H H 18 H 17 Orderng example: evel gear hgh speed screw jack H1, H E Ø H 14 W W 1 Ø W j6 Sze H 3 Ø H 4 f7 Rotatng spndle Stroke 0 mm F H 3 Rato :1 L 17 KSH R 0 :1 L L
5 KSH evel gear hgh speed screw jack max. statc lftng force 1) [kn] Lft per revoluton [mm] Rato Mass [kg] d Dmensons [mm] D 5 d 1 d SA Ø d 3 SVA d 3 d 4 L 5 L 6 L 7 L 8 L 9 L L 11 L 1 L 13 L 14 KSH1Rstroke KSH1SAstroke KSH1SVAstroke,5 / 1,66,5 / 1,66,5 / 1,66 9 Tr 4x5 9 Tr 4x5 9 Tr 4x5 17 M18 M KSHRstroke KSHSAstroke KSHSVAstroke ,5 /,33 3,5 /,33 3,5 /, Tr 40x7 Tr 40x7 Tr 40x7 5 M M ,5 5, KSH3Rstroke KSH3SAstroke KSH3SVAstroke Tr x9 Tr x9 Tr x9 M48x M48x 95 0 / 0 / 0 / 1) The values for max. load apply only for ntal jack selecton. The actual permtted lftng force depends on the verson of the jack and the operatng condtons. 4,5 / 3,0 4,5 / 3,0 4,5 / 3, Dmensons [mm] L L 16 L 17 H 1 H 3 H 4 H 7 H 14 H 17 H 18 H 19 KSH1Rstroke KSH1SAstroke KSH1SVAstroke KSHRstroke KSHSAstroke KSHSVAstroke M1 M1 M1 KSH3Rstroke KSH3SAstroke KSH3SVAstroke / 80 / 80 / / 8 13 / 8 13 / 8 5 / 3 5 / 3 5 / 3 M M M Dmensons [mm] KSH1Rstroke KSH1SAstroke KSH1SVAstroke H H 1 H H 3 H 4 H 5 H 6 H 7 H 8 H 9 W M M M 89 M8 89 M8 89 M8 18 / 1 18 / 1 18 / 1 W 1 W CADNo.: 7511 / / / 75 KSHRstroke KSHSAstroke KSHSVAstroke M M M 1 M 1 M 1 M 3 / 8 3 / 8 3 / 8 / 8 / 8 / / / / 75 KSH3Rstroke KSH3SAstroke KSH3SVAstroke / 1 16 / 1 16 / 1 80 / 80 / 80 / 7511 / / /
6 KSH evel gear hgh speed screw jack Dmensons KSH1 to KSH3 all screw spndle translatng verson (SA, SVA) bevel gear hgh speed screw jack wth ball screw spndle are normally suppled flled wth ol. The ol level glass, ol fller and dran plug are on face D. Devatons from standard can be specfed when orderng. The output s usually on face. Addtonal nput and output shafts can be provded on faces D, E and F. Versons: SA: Translatng spndle wth travel lmter SVA: Translatng spndle wth rotaton preventon and travel lmter KGS dxp Rato: Lubrcaton: Materal: Accessores: Questonnare: :1, 3:1 Ol GG5 see catalogue accessores for HSG and KSH see HSG catalogue s 3 34 H 8, H 9 H 7 H 7 stroke+x Z= stroke +A H 1 A 1 N H H 3 D Ø D h9 KSH D 5 Ø D 1 h9 Ø D h9 A H 5 H 5 C Verson SA, SVA H 5, H 6 Ø d 4 f7 Ø H 4 d 3 H 19, H H 18 H 17 H 1, H E Ø H 14 W W 1 Ø W j6 H 3 Ø H 4 f7 Orderng example: F H 3 evel gear hgh speed screw jack Sze Translatng spndle wth travel lmter Stroke 0 mm Rato :1 L 17 L L 16 KSH SA 0 :1 KGS 40x5 all screw / sze
7 KSH evel gear hgh speed screw jack KSH1SA/SVAstrokeKGS5x5 KSH1SA/SVAstrokeKGS5x KSH1SA/SVAstrokeKGS5x5 KSH1SA/SVAstrokeKGS5x KSHSA/SVAstrokeKGS40x5 KSHSA/SVAstrokeKGS3x KSHSA/SVAstrokeKGS3x KSHSA/SVAstrokeKGS40x5 KSHSA/SVAstrokeKGS3x KSHSA/SVAstrokeKGS3x KSH3SA/SVAstrokeKGS63x KSH3SA/SVAstrokeKGS63x Lftng force F dyn. [kn] max. statc lftng force 1) F stat. [kn] Lft per revoluton [mm] KGS dxp 14,9,5 :1 5x , 5 :1 5x ,9 1,66 3:1 5x , 3,33 3:1 5x ,4 40,5 :1 40x , :1 3x ,7 40 :1 3x ,4 40 1,66 3:1 40x ,4 40 3,33 3:1 3x ,7 40 6,66 3:1 3x :1 63x :1 63x Rato CADNo.: KSH3SA/SVAstrokeKGS63x KSH3SA/SVAstrokeKGS63x 76 3,33 3:1 63x ,66 3:1 63x ) The values for max. load apply only for ntal jack selecton. The actual permtted lftng force depends on the verson of the jack and the operatng condtons. Dmensons [mm] d 4 A A 1 L L 16 L 17 H 1 H H 3 H 4 H 5 H 14 H 17 H 18 H 19 H H 1 KSH1SA/SVAstrokeKGS5x5 KSH1SA/SVAstrokeKGS5x M M KSHSA/SVAstrokeKGS40x5 KSHSA/SVAstrokeKGS3x KSHSA/SVAstrokeKGS3x M1 M1 M1 KSH3SA/SVAstrokeKGS63x KSH3SA/SVAstrokeKGS63x 0 / 0 / / , / , / 8 13 / 8 5 / 3 5 / 3 M M Dmensons [mm] H H 3 H 4 H 5 H 6 H 7 H 8 H 9 W W 1 W SA Ø d 3 SVA d 3 SA X SVA X D 1 D D 5 N KSH1SA/SVAstrokeKGS5x5 KSH1SA/SVAstrokeKGS5x M8 M8 18 / 1 18 / M M14 KSHSA/SVAstrokeKGS40x5 KSHSA/SVAstrokeKGS3x KSHSA/SVAstrokeKGS3x M M M M M M 3 / 8 3 / 8 3 / 8 / 8 / 8 / M M M KSH3SA/SVAstrokeKGS63x KSH3SA/SVAstrokeKGS63x / 1 16 / 1 80 / 80 / M48x M48x
8 KSH evel gear hgh speed screw jack Dmensons KSH1 to KSH3 all screw spndle rotatng verson (R) bevel gear hgh speed screw jack wth ball screw spndle are normally suppled flled wth ol. The ol level glass, ol fller and dran plug are on face D. Devatons from standard can be specfed when orderng. The output s usually on face. Addtonal nput and output shafts can be provded on faces D, E and F. Versons: R: Rotatng spndle Rato: Lubrcaton: Materal: :1, 3:1 Ol GG5 KGS dxp Ø D 5 j6 Accessores: Questonnare: see catalogue accessores for HSG and KSH see HSG catalogue s 3 34 H 8, H 9 H 7 Z= stroke +A H 1 H A 1 L1 stroke A E D KSH C Verson R Dmensons of flanged nut, see H 7 H 19, H H 18 H 17 H1, H E W Ø W j6 H 3 Ø H 4 f7 H 5, H 6 Ø d 4 f7 Ø H 4 A Ø H 14 W 1 Orderng example: F H 3 evel gear hgh speed screw jack Sze Rotatng spndle Stroke 0 mm Rato :1 L 17 L L 16 KSH R 0 :1 KGS 40x5 all screw / sze For all undmensoned parts see KSH verson wth trapezodal spndle
9 KSH evel gear hgh speed screw jack KSH1RstrokeKGS5x5 KSH1RstrokeKGS5x KSH1RstrokeKGS5x5 KSH1RstrokeKGS5x KSHRstrokeKGS40x5 KSHRstrokeKGS40x KSHRstrokeKGS40x KSHRstrokeKGS40x5 KSHRstrokeKGS40x KSHRstrokeKGS40x KSH3RstrokeKGS63x KSH3RstrokeKGS63x Lftng force F dyn. [kn] max. statc lftng force 1) F stat. [kn] Lft per revoluton [mm] KGS dxp 14,9,5 :1 5x :1 5x ,9 1,66 3:1 5x ,33 3:1 5x ,3 40,5 :1 40x , :1 40x ,8 36 :1 40x 759 3,3 40 1,66 3:1 40x ,8 40 3,33 3:1 40x ,8 36 6,66 3:1 40x ,7 5 :1 63x :1 63x Rato CADNo.: KSH3RstrokeKGS63x KSH3RstrokeKGS63x 84,7 3,33 3:1 63x ,66 3:1 63x ) The values for max. load apply only for ntal jack selecton. The actual permtted lftng force depends on the verson of the jack and the operatng condtons. Dmensons [mm] KSH1RstrokeKGS5x5 KSH1RstrokeKGS5x d 4 A A 1 A L L L 17 H 1 H H 4 H H 17 H KSHRstrokeKGS40x5 KSHRstrokeKGS40x KSHRstrokeKGS40x 171,5,5 5 19,5 67, ,5, KSH3RstrokeKGS63x KSH3RstrokeKGS63x 0 / 0 / / 80 / , , / 8 13 / 8 5 / 3 5 / 3 Dmensons [mm] H 19 H H 1 H H 3 H 4 H 5 H 6 H 7 H 8 H 9 W W 1 W D 5 E KSH1RstrokeKGS5x5 KSH1RstrokeKGS5x M M M8 M8 18 / 1 18 / KSHRstrokeKGS40x5 KSHRstrokeKGS40x KSHRstrokeKGS40x M1 M1 M1 M M M M M M 3 / 8 3 / 8 3 / 8 / 8 / 8 / KSH3RstrokeKGS63x KSH3RstrokeKGS63x M M / 1 16 / 1 80 / 80 /
10 KSH evel gear hgh speed screw jack Dmensons KSH1 to KSH3 all screw spndle rotatng verson (R) dmensons for flanged nut flanged nut to DIN 651 s the standard connecton method from the screw jack to the movng component. KGS dxp Ø D 5 j6 Ø D 1 g6 0, Ø D 1 0,3 Z= stroke +A A 1 L1 stroke E A S L 4 L 3 L D KSH C A Lubrcaton connecton Ø D 4 Ø D 4,5 Ø D 3 Ø D Ø D 3 Ø D Flanged nut DIN 651 (hole pattern 1) Flanged nut DIN 651 (hole pattern )
11 KSH evel gear hgh speed screw jack KSH1RstrokeKGS5x5 KSH1RstrokeKGS5x KSHRstrokeKGS40x5 KSHRstrokeKGS40x KSHRstrokeKGS40x KSH3RstrokeKGS63x KSH3RstrokeKGS63x Hole pattern KGS dxp A Dmensons [mm] A 1 A D 1 D D 3 D 4 D 5 E L 1 L L 3 L 4 5x , M6 5x , M6 1 40x5 171,5, M8x1 1 40x 19,5 67, M8x1 1 40x 193,5, M8x1 1 63x M8x1 1 63x , M8x1 S
12 KSH evel gear hgh speed screw jack Calculatons for KSH1 to KSH3 see catalogue for HSG (for HSG and KSH) s 34 HSG KSH selecton of screw jacks examples 1 to 18 0 HSG KSH defnton of the appled loads, torques and speeds/calculatons calculaton of duty maxmum duty ED [%/h] 0 HSG KSH calculatons crtcal bucklng loads on the lftng spndle F crt. [kn] crtcal spndle speed n (only for rotatng spndle verson R) crt. HSG KSH calculatons torque n the lftng spndle M Sp. [Nm], brakng torque M r. [Nm] nput torque M n. [Nm] HSG KSH calculatons total nput torque M tot. [Nm] nput speed n n. [1/mn], nput power P n. [kw] actual lftng speed V [m/mn] lft act. HSG KSH gear housng materal / nstallaton and mantenance nstructons gear housng materal nstallaton, mantenance (HSG0 to HSG5) HSG KSH questonnare for quotaton purposes accessores for verson R (rotatng spndle) HSG KSH questonnare accessores for verson S (translatng spndle) We reserve the rght to make techncal GROUP Headoffce Phone: +49/ (0) changes. For current nformaton go to Neue Rehe 44 Fax: +49/ (0) or your local sales offce. D3816 Schandelah EMal: nfo@nkoma.de
KSH Bevel gear high speed screw jack
Product descrpton Bevel gear hgh speed screw jack KSH1 to KSH3 The INKOMAbevel gear hgh speed screw jack type KSH s a modular desgn n 3 szes. Each sze s avalable wth two ratos; :1 and 3:1. All gear housngs
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. SGT screw jack. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria
DRIVETECHNOLOGY ALBERTINKOMA GROUP SGT screw jack Maschnenfabrk ALBERT GmbH Technologepark A Gampern Austra phone: +/()79 fax: +/()7999 emal: offce@albert.at nternet: www.albert.at We reserve the rght
More informationDas Winkelgetriebe. Made in Germany. Type: S, SL, Double worm gear unit. bevel gearboxes. Miniature. gearboxes. Bevel.
Made n Germany Mnature bevel Bevel Hypod Gearbox motors Servo Specal ATEX Gear sets Servce (precson ) Type: S, SL, Double worm gear unt Hygene-desgn Das Wnkelgetrebe 9 9. Type overvew Type S Standard worm
More informationMARATHON GEARBOXES SHAFT MOUNTED SERIES BROCHURE
MRTHO GEROXES SHFT MOUTED SERIES ROHURE F1F1FF1 1 Stages The Dynamc Effcency s for all Ratos Input Speed (n 1 )=0 mn 1 F1 F1 70 F 7 F1 [mn 1 ] 1 7 2 21 [mn 1 ] 277 21 2 [mn 1 ] 7 1 0 [mn 1 ] 2 0 0 2 2
More informationCompendium Screw Jacks
Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories
More informationVehicle Propulsion Systems Lecture 2. Energy System Overview. W2M Energy Paths. Evaluating the integral. Mechanical Energy Demand of a Cycle
Vehcle Propulson Systems Lecture 2 Fuel Consumpton Estmaton & ICE Powertrans Lars Erksson Professor Vehcular Systems Lnköpng Unversty March 21, 2017 2 / 51 3 / 51 W2M Energy Paths Energy System Overvew
More informationWORM SCREW REDUCTION GEARS AND MOTOR REDUCTION GEARS
. 0 INTRODUCTION Ametrc ntends to boost ts presence n the marketplace by drawng on ts twn strengths of qualty and an ongong commtment to product mprovement amed at satsfyng all our customer s needs. Our
More informationChapter 12 Equilibrium & Elasticity
Chapter 12 Equlbrum & Elastcty If there s a net force, an object wll experence a lnear acceleraton. (perod, end of story!) If there s a net torque, an object wll experence an angular acceleraton. (perod,
More informationExperiment 1 Mass, volume and density
Experment 1 Mass, volume and densty Purpose 1. Famlarze wth basc measurement tools such as verner calper, mcrometer, and laboratory balance. 2. Learn how to use the concepts of sgnfcant fgures, expermental
More informationMulti degree of freedom measurement of machine tool movements. W. Knapp, S.Weikert Institute for Machine Tools and Manufacturing (IWF), Swiss Federal
Mult degree of freedom measurement of machne tool movements W. Knapp, S.Wekert Insttute for Machne Tools and Manufacturng (IWF), Swss Federal \ ^r Az. ca, we z'tz rf @ z w/: Agpr. graz. ca Abstract The
More information1. Int In e t rnal Losses: tak ta e k place plac in the inner passages adding heat to the flow medium 2. External losses:
he Losses of urbomachnes 1. Internal Losses: Losses whch take place n the nner passages of the machne and drectly connected wth rotor or flow of the medum and whch are addng heat to the flow medum 2. External
More informationAxial Turbine Analysis
Axal Turbne Analyss From Euler turbomachnery (conservaton) equatons need to Nole understand change n tangental velocty to relate to forces on blades and power m W m rc e rc uc uc e Analye flow n a plane
More informationActuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT
Actuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT Product overview Actuators with ball monorail guidance system and ball screw drive Actuators with ball monorail
More informationME 307 Machine Design I. Chapter 8: Screws, Fasteners and the Design of Nonpermanent Joints
Dr.. zz Bazoune Chapter 8: Screws, Fasteners and the Desgn of Nonpermanent Jonts Dr.. zz Bazoune Chapter 8: Screws, Fasteners and the Desgn of Nonpermanent Jonts CH-8 LEC 35 Slde 2 Dr.. zz Bazoune Chapter
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More informationFor a 1-weight experiment do Part 1. For a 2-weight experiment do Part 1 and Part 2
Page of 6 THE GYROSCOPE The setup s not connected to a computer. You cannot get measured values drectly from the computer or enter them nto the lab PC. Make notes durng the sesson to use them later for
More informationPlease review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
ME 270 Summer 2014 Fnal Exam NAME (Last, Frst): Please revew the followng statement: I certfy that I have not gven unauthorzed ad nor have I receved ad n the completon of ths exam. Sgnature: INSTRUCTIONS
More informationR-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02
R-Plus System R-Plus System R-Plus system R-Plus system description Fig. R-Plus system R-Plus System is Rollon s series of rack & pinion driven actuators. Rollon R-Plus System series linear units are designed
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. SDA - Spindle direct drive actuator. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria
DRIVETECHNOLOGY ALBERTINKOMA GROUP SDA Spindle direct drive actuator Mascinenfabrik ALBERT GmbH Tecnologiepark A Gampern Austria pone: +/(0)0 fax: +/(0)0 email: office@albert.at internet: www.albert.at
More informationMARATHON GEARBOXES INLINE COAXIAL SERIES BROCHURE
MAATON EAOXE INLINE OAXIAL EIE OUE 2AA2A The Dynamc Effcency s 6 for all atos Input peed (n 1 )=00 mn 1 2A A 2A 0 00 [mn 1 ] 27 27 22 1 1 2 7 6 7 66 6. 7.1 2. 2.1 22.6 [mn 1 ] 27 27 22 1 1 2 7 6 7 66 6.
More informationMEASURING INSTRUMENTS - STRUMENTI PER MISURARE
MEASURING INSTRUMENTS - STRUMENTI PER MISURARE THERMOWELLS ntroducton to thermowells 9 Thermowells are used to protect bulbs from the effects of corroson and process flud flow, due to the hgh speed at
More informationModule 3 LOSSY IMAGE COMPRESSION SYSTEMS. Version 2 ECE IIT, Kharagpur
Module 3 LOSSY IMAGE COMPRESSION SYSTEMS Verson ECE IIT, Kharagpur Lesson 6 Theory of Quantzaton Verson ECE IIT, Kharagpur Instructonal Objectves At the end of ths lesson, the students should be able to:
More informationLinear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.
Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)
More informationSecond Order Analysis
Second Order Analyss In the prevous classes we looked at a method that determnes the load correspondng to a state of bfurcaton equlbrum of a perfect frame by egenvalye analyss The system was assumed to
More informationPhysics 111: Mechanics Lecture 11
Physcs 111: Mechancs Lecture 11 Bn Chen NJIT Physcs Department Textbook Chapter 10: Dynamcs of Rotatonal Moton q 10.1 Torque q 10. Torque and Angular Acceleraton for a Rgd Body q 10.3 Rgd-Body Rotaton
More informationStrength Requirements for Fore Deck Fittings and Equipment
(Nov 2002) (Rev.1 March 2003) (Corr.1 July 2003) (Rev.2 Nov 2003) (Rev.3 July 2004) (Rev.4 Nov 2004) (Rev.5 May 2010) Strength Requrements for Fore Deck Fttngs and Equpment 1. General 1.1 Ths UR S 27 provdes
More informationWelcome to where precision is. Large Ball Screws Diameter mm
Welcome to where precision is. Large Ball Screws Diameter mm Large Ball Screws Diameter mm This section includes nuts with standard dimensions per ISO 8 / DIN 1. In most cases, there is a choice of three
More informationAP Physics 1 & 2 Summer Assignment
AP Physcs 1 & 2 Summer Assgnment AP Physcs 1 requres an exceptonal profcency n algebra, trgonometry, and geometry. It was desgned by a select group of college professors and hgh school scence teachers
More information10/24/2013. PHY 113 C General Physics I 11 AM 12:15 PM TR Olin 101. Plan for Lecture 17: Review of Chapters 9-13, 15-16
0/4/03 PHY 3 C General Physcs I AM :5 PM T Oln 0 Plan or Lecture 7: evew o Chapters 9-3, 5-6. Comment on exam and advce or preparaton. evew 3. Example problems 0/4/03 PHY 3 C Fall 03 -- Lecture 7 0/4/03
More informationSCREWS, FASTENERS AND NON PERMANENT JOINTS 2 MOW Department of Mechanical and Aeronautical Engineering
SCREWS, ASTENERS AND NON PERMANENT JOINTS 2 MOW 227 2014 Yeldng take place n the frst thread wth cold work strengthenng Never re-use nuts n structural connectons because ther thread gets daaged Washers
More informationModeling of Dynamic Systems
Modelng of Dynamc Systems Ref: Control System Engneerng Norman Nse : Chapters & 3 Chapter objectves : Revew the Laplace transform Learn how to fnd a mathematcal model, called a transfer functon Learn how
More informationLecture 8 Modal Analysis
Lecture 8 Modal Analyss 16.0 Release Introducton to ANSYS Mechancal 1 2015 ANSYS, Inc. February 27, 2015 Chapter Overvew In ths chapter free vbraton as well as pre-stressed vbraton analyses n Mechancal
More informationTorsion Stiffness of Thin-walled Steel Beams with Web Holes
Torson Stffness of Thn-walled Steel Beams wth Web Holes MARTN HORÁČEK, JNDŘCH MELCHER Department of Metal and Tmber Structures Brno Unversty of Technology, Faculty of Cvl Engneerng Veveří 331/95, 62 Brno
More informationPVP DETERMINATION OF GIMBAL AND HINGED EXPANSION JOINTS REACTION MOMENTS
Proceedngs of the ASME 21 Pressure Vessel & Ppng Dvson / K-PVP Conference PVP21 July 18-22, 21, Bellevue, Washngton, USA PVP21-25223 DETERMINATION OF GIMBAL AND HINGED EXPANSION JOINTS REACTION MOMENTS
More informationPivot-Wheel Drive Crab with a Twist! Clem McKown Team November-2009 (eq 1 edited 29-March-2010)
Pvot-Wheel Drve Crab wth a Twst! Clem McKown Team 1640 13-November-2009 (eq 1 edted 29-March-2010) 4-Wheel Independent Pvot-Wheel Drve descrbes a 4wd drve-tran n whch each of the (4) wheels are ndependently
More informationUncertainty in measurements of power and energy on power networks
Uncertanty n measurements of power and energy on power networks E. Manov, N. Kolev Department of Measurement and Instrumentaton, Techncal Unversty Sofa, bul. Klment Ohrdsk No8, bl., 000 Sofa, Bulgara Tel./fax:
More informationDesign and Analysis of Landing Gear Mechanic Structure for the Mine Rescue Carrier Robot
Sensors & Transducers 214 by IFSA Publshng, S. L. http://www.sensorsportal.com Desgn and Analyss of Landng Gear Mechanc Structure for the Mne Rescue Carrer Robot We Juan, Wu Ja-Long X an Unversty of Scence
More informationPrimary Unit Substations Secondary 1000 V & Above
November Sheet 00 Prmary Prmary Unt Substatons Secondary V & Above.0- Unt Substatons Secondary V & Above Contents Prmary Unt Substatons Secondary V & Above Prmary -Type Substatons General Descrpton............................................0-
More informationSociété de Calcul Mathématique SA
Socété de Calcul Mathématque SA Outls d'ade à la décson Tools for decson help Probablstc Studes: Normalzng the Hstograms Bernard Beauzamy December, 202 I. General constructon of the hstogram Any probablstc
More informationZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
More informationCOMPOSITE BEAM WITH WEAK SHEAR CONNECTION SUBJECTED TO THERMAL LOAD
COMPOSITE BEAM WITH WEAK SHEAR CONNECTION SUBJECTED TO THERMAL LOAD Ákos Jósef Lengyel, István Ecsed Assstant Lecturer, Professor of Mechancs, Insttute of Appled Mechancs, Unversty of Mskolc, Mskolc-Egyetemváros,
More informationIncrease Decrease Remain the Same (Circle one) (2 pts)
ME 270 Sample Fnal Eam PROBLEM 1 (25 ponts) Prob. 1 questons are all or nothng. PROBLEM 1A. (5 ponts) FIND: A 2000 N crate (D) s suspended usng ropes AB and AC and s n statc equlbrum. If θ = 53.13, determne
More informationPart C Dynamics and Statics of Rigid Body. Chapter 5 Rotation of a Rigid Body About a Fixed Axis
Part C Dynamcs and Statcs of Rgd Body Chapter 5 Rotaton of a Rgd Body About a Fxed Axs 5.. Rotatonal Varables 5.. Rotaton wth Constant Angular Acceleraton 5.3. Knetc Energy of Rotaton, Rotatonal Inerta
More informationModule 11 Design of Joints for Special Loading. Version 2 ME, IIT Kharagpur
Module 11 Desgn o Jonts or Specal Loadng Verson ME, IIT Kharagpur Lesson 1 Desgn o Eccentrcally Loaded Bolted/Rveted Jonts Verson ME, IIT Kharagpur Instructonal Objectves: At the end o ths lesson, the
More informationSTUDY OF A THREE-AXIS PIEZORESISTIVE ACCELEROMETER WITH UNIFORM AXIAL SENSITIVITIES
STUDY OF A THREE-AXIS PIEZORESISTIVE ACCELEROMETER WITH UNIFORM AXIAL SENSITIVITIES Abdelkader Benchou, PhD Canddate Nasreddne Benmoussa, PhD Kherreddne Ghaffour, PhD Unversty of Tlemcen/Unt of Materals
More informationRobust Optimum Design of Thrust Hydrodynamic Bearings for Hard Disk Drives
Appled Mathematcs, 0, 3, 368-379 http://dx.do.org/0.436/am.0.33093 Publshed Onlne October 0 (http://www.scrp.org/journal/am) Robust Optmum Desgn of Thrust Hydrodynamc Bearngs for Hard Dsk Drves Hromu Hashmoto,
More informationEffect of loading frequency on the settlement of granular layer
Effect of loadng frequency on the settlement of granular layer Akko KONO Ralway Techncal Research Insttute, Japan Takash Matsushma Tsukuba Unversty, Japan ABSTRACT: Cyclc loadng tests were performed both
More informationALGORITHM FOR THE CALCULATION OF THE TWO VARIABLES CUBIC SPLINE FUNCTION
ANALELE ŞTIINŢIFICE ALE UNIVERSITĂŢII AL.I. CUZA DIN IAŞI (S.N.) MATEMATICĂ, Tomul LIX, 013, f.1 DOI: 10.478/v10157-01-00-y ALGORITHM FOR THE CALCULATION OF THE TWO VARIABLES CUBIC SPLINE FUNCTION BY ION
More informationWeek 9 Chapter 10 Section 1-5
Week 9 Chapter 10 Secton 1-5 Rotaton Rgd Object A rgd object s one that s nondeformable The relatve locatons of all partcles makng up the object reman constant All real objects are deformable to some extent,
More informationENGN 40 Dynamics and Vibrations Homework # 7 Due: Friday, April 15
NGN 40 ynamcs and Vbratons Homework # 7 ue: Frday, Aprl 15 1. Consder a concal hostng drum used n the mnng ndustry to host a mass up/down. A cable of dameter d has the mass connected at one end and s wound/unwound
More informationInfluence of Structural Parameters of Electromagnetic Harmonic Movable Teeth Transmission on System Loss
Send Orders for Reprnts to reprnts@benthamscence.ae 778 The Open Mechancal Engneerng Journal, 014, 8, 778-786 Open Access Influence of Structural Parameters of Electromagnetc Harmonc Movable Teeth Transmsson
More informationEVALUATION OF THE VISCO-ELASTIC PROPERTIES IN ASPHALT RUBBER AND CONVENTIONAL MIXES
EVALUATION OF THE VISCO-ELASTIC PROPERTIES IN ASPHALT RUBBER AND CONVENTIONAL MIXES Manuel J. C. Mnhoto Polytechnc Insttute of Bragança, Bragança, Portugal E-mal: mnhoto@pb.pt Paulo A. A. Perera and Jorge
More informationDynamic Analysis Based On ANSYS of Turning and Grinding Compound Machine Spindle Box Zanhui Shu and Qiushi Han
Advanced Materals Research Onlne: 2012-01-03 ISSN: 1662-8985, Vols. 433-440, pp 524-529 do:10.4028/www.scentfc.net/amr.433-440.524 2012 Trans Tech Publcatons, Swtzerland Dynamc Analyss Based On ANSYS of
More informationIdentification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )
Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive
More informationSelection of jack size No. 5 Check again with ball screw jack Type J-B. Yes. Set the hand wheel radius if the screw jack is to be used for manual operation. Yes. Yes. Specification Select temporarily the
More informationI have not received unauthorized aid in the completion of this exam.
ME 270 Sprng 2013 Fnal Examnaton Please read and respond to the followng statement, I have not receved unauthorzed ad n the completon of ths exam. Agree Dsagree Sgnature INSTRUCTIONS Begn each problem
More informationPhysics 106 Lecture 6 Conservation of Angular Momentum SJ 7 th Ed.: Chap 11.4
Physcs 6 ecture 6 Conservaton o Angular Momentum SJ 7 th Ed.: Chap.4 Comparson: dentons o sngle partcle torque and angular momentum Angular momentum o a system o partcles o a rgd body rotatng about a xed
More informationFirst Law: A body at rest remains at rest, a body in motion continues to move at constant velocity, unless acted upon by an external force.
Secton 1. Dynamcs (Newton s Laws of Moton) Two approaches: 1) Gven all the forces actng on a body, predct the subsequent (changes n) moton. 2) Gven the (changes n) moton of a body, nfer what forces act
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationDynamic Similarity Design of Geared Rotor System in Five-Shaft Integrally Centrifugal Compressor
Dynamc Smlarty Desgn of Geared Rotor System n Fve-Shaft Integrally Centrfugal Compressor Hao Zhang 1, Gaoshan We, Xu Chen, Qngka Han 1,* 1. Collaboratve Innovaton Center of Maor Machne Manufacturng n Laonng,
More informationZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors
ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron
More informationChapter 11: Angular Momentum
Chapter 11: ngular Momentum Statc Equlbrum In Chap. 4 we studed the equlbrum of pontobjects (mass m) wth the applcaton of Newton s aws F 0 F x y, 0 Therefore, no lnear (translatonal) acceleraton, a0 For
More informationORIGIN 1. PTC_CE_BSD_3.2_us_mp.mcdx. Mathcad Enabled Content 2011 Knovel Corp.
Clck to Vew Mathcad Document 2011 Knovel Corp. Buldng Structural Desgn. homas P. Magner, P.E. 2011 Parametrc echnology Corp. Chapter 3: Renforced Concrete Slabs and Beams 3.2 Renforced Concrete Beams -
More informationN- and P-Channel 20-V (D-S) MOSFET
S45DY N- and P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) (A).45 at V GS = V 9.6 N-Channel.7 at V GS = 4.5 V.6 FEATURES Halogen-free Accordng to IEC 649-- Defnton TrenchFET Power MOSFET
More informationCompressor map prediction tool
IOP Conference Seres: Materals Scence and Engneerng PAPER OPEN ACCESS Compressor map predcton tool To cte ths artcle: Arjun Rav et al 015 IOP Conf. Ser.: Mater. Sc. Eng. 90 0104 Vew the artcle onlne for
More informationPERFORMANCE OF HEAVY-DUTY PLANETARY GEARS
THE INTERNATIONAL CONFERENCE OF THE CARPATHIAN EURO-REGION SPECIALISTS IN INDUSTRIAL SYSTEMS 6 th edton PERFORMANCE OF HEAVY-DUTY PLANETARY GEARS Attla Csobán, Mhály Kozma 1, 1 Professor PhD., Eng. Budapest
More informationDrive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company
Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball
More informationDynamics of Rotational Motion
Dynamcs of Rotatonal Moton Torque: the rotatonal analogue of force Torque = force x moment arm = Fl moment arm = perpendcular dstance through whch the force acts a.k.a. leer arm l F l F l F l F = Fl =
More informationStudy Guide For Exam Two
Study Gude For Exam Two Physcs 2210 Albretsen Updated: 08/02/2018 All Other Prevous Study Gudes Modules 01-06 Module 07 Work Work done by a constant force F over a dstance s : Work done by varyng force
More informationChapter 11 Angular Momentum
Chapter 11 Angular Momentum Analyss Model: Nonsolated System (Angular Momentum) Angular Momentum of a Rotatng Rgd Object Analyss Model: Isolated System (Angular Momentum) Angular Momentum of a Partcle
More informationHighly-Efficient Multi-Coil Wireless Power Transfer (WPT)
Hghly-Effcent Mult-Col Wreless Power Transfer WPT Mehd Kan May 3, 04 GT-Boncs ab, School of Electrcal and Computer Engneerng Georga Insttute of Technology, Atlanta, GA www.gtboncs.org WPT Applcatons Chargng
More informationPHYS 1441 Section 001 Lecture #15 Wednesday, July 8, 2015
PHYS 1441 Secton 001 Lecture #15 Wednesday, July 8, 2015 Concept of the Center of Mass Center of Mass & Center of Gravty Fundamentals of the Rotatonal Moton Rotatonal Knematcs Equatons of Rotatonal Knematcs
More informationBacklash-free Torque Limiting Clutches
ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs
More informationPHYS 705: Classical Mechanics. Newtonian Mechanics
1 PHYS 705: Classcal Mechancs Newtonan Mechancs Quck Revew of Newtonan Mechancs Basc Descrpton: -An dealzed pont partcle or a system of pont partcles n an nertal reference frame [Rgd bodes (ch. 5 later)]
More informationPhysics 141. Lecture 14. Frank L. H. Wolfs Department of Physics and Astronomy, University of Rochester, Lecture 14, Page 1
Physcs 141. Lecture 14. Frank L. H. Wolfs Department of Physcs and Astronomy, Unversty of Rochester, Lecture 14, Page 1 Physcs 141. Lecture 14. Course Informaton: Lab report # 3. Exam # 2. Mult-Partcle
More informationBasic concepts and definitions in multienvironment
Basc concepts and defntons n multenvronment data: G, E, and GxE Marcos Malosett, Danela Bustos-Korts, Fred van Eeuwk, Pter Bma, Han Mulder Contents The basc concepts: ntroducton and defntons Phenotype,
More informationGEOSYNTHETICS ENGINEERING: IN THEORY AND PRACTICE
GEOSYNTHETICS ENGINEERING: IN THEORY AND PRACTICE Prof. J. N. Mandal Department of cvl engneerng, IIT Bombay, Powa, Mumba 400076, Inda. Tel.022-25767328 emal: cejnm@cvl.tb.ac.n Module - 9 LECTURE - 48
More informationEnergy, Entropy, and Availability Balances Phase Equilibria. Nonideal Thermodynamic Property Models. Selecting an Appropriate Model
Lecture 4. Thermodynamcs [Ch. 2] Energy, Entropy, and Avalablty Balances Phase Equlbra - Fugactes and actvty coeffcents -K-values Nondeal Thermodynamc Property Models - P-v-T equaton-of-state models -
More informationPlease review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
ME 270 Sprng 2014 Fnal Exam NME (Last, Frst): Please revew the followng statement: I certfy that I have not gven unauthorzed ad nor have I receved ad n the completon of ths exam. Sgnature: INSTRUCTIONS
More informationA LINEAR PROGRAM TO COMPARE MULTIPLE GROSS CREDIT LOSS FORECASTS. Dr. Derald E. Wentzien, Wesley College, (302) ,
A LINEAR PROGRAM TO COMPARE MULTIPLE GROSS CREDIT LOSS FORECASTS Dr. Derald E. Wentzen, Wesley College, (302) 736-2574, wentzde@wesley.edu ABSTRACT A lnear programmng model s developed and used to compare
More informationWinter 2008 CS567 Stochastic Linear/Integer Programming Guest Lecturer: Xu, Huan
Wnter 2008 CS567 Stochastc Lnear/Integer Programmng Guest Lecturer: Xu, Huan Class 2: More Modelng Examples 1 Capacty Expanson Capacty expanson models optmal choces of the tmng and levels of nvestments
More informationLINE TECH Linear Modules. Ready to built-in linear modules with drive
Ready to built-in linear modules with drive Anodized profile, produced in extrusion molding method Linear rail guiding system (LM3 LM5) Actuation by ball screw, high-helix lead _ screw or toothed belt
More informationVERSARAM ELECTROMECHANICAL LINEAR ACTUATORS AND SCREW SUPPORTS
VRSARAM LTROMHANIAL LINAR ATUATORS AN SRW SUPPORTS 7 LTROMHANIAL LINAR ATUATORS OVRVIW OF TH PROUT BB TIPPING FLANG M INTGRAT BVL GAR BOX M1 RIGHT ANGL MOTOR RUR AN MOTOR MOUNT M0 ATUATOR BASI MOL BP TOP
More informationNegative Binomial Regression
STATGRAPHICS Rev. 9/16/2013 Negatve Bnomal Regresson Summary... 1 Data Input... 3 Statstcal Model... 3 Analyss Summary... 4 Analyss Optons... 7 Plot of Ftted Model... 8 Observed Versus Predcted... 10 Predctons...
More informationPower Losses. d e t e r m i n i n g
d e t e r m n n g ower Losses etra Hengartner s a Textron Sx Sgma black belt for flud and power at Textron Flud & ower, located n Huddersfeld, England. She leads cross-functonal teams to mprove work processes
More informationGRAPHICAL METHOD IN CATIA ENVIRONMENT FOR PROFILING ROTATING CUTTERS
Proceedngs n Manufacturng Systems, Volume 9, Issue 2, 2014, 81 86 ISSN 2067-9238 GRAPHICAL METHOD IN CATIA ENVIRONMENT FOR PROFILING ROTATING CUTTERS Gabrel FRUMUŞANU 1,*, Slvu BERBINSCHI 2, Ncolae OANCEA
More informationDUE: WEDS FEB 21ST 2018
HOMEWORK # 1: FINITE DIFFERENCES IN ONE DIMENSION DUE: WEDS FEB 21ST 2018 1. Theory Beam bendng s a classcal engneerng analyss. The tradtonal soluton technque makes smplfyng assumptons such as a constant
More information11. Dynamics in Rotating Frames of Reference
Unversty of Rhode Island DgtalCommons@URI Classcal Dynamcs Physcs Course Materals 2015 11. Dynamcs n Rotatng Frames of Reference Gerhard Müller Unversty of Rhode Island, gmuller@ur.edu Creatve Commons
More informationMeasurement of Positional Deviation of Numerically Controlled Axes
XXXII. Semnar ASR '7 Instruments and Control, Farana, Smutný, Kočí & Babuch (eds) 7, VŠB-TUO, Ostrava, ISBN 978-8-48-7-4 Measurement of Postonal Devaton of Numercally Controlled Axes KUREKOVÁ, Eva, HAAJ,
More informationUsing the estimated penetrances to determine the range of the underlying genetic model in casecontrol
Georgetown Unversty From the SelectedWorks of Mark J Meyer 8 Usng the estmated penetrances to determne the range of the underlyng genetc model n casecontrol desgn Mark J Meyer Neal Jeffres Gang Zheng Avalable
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationSWITCHING PROCESS IN LIMITED SLIP DIFFERENTIAL
6th Internatonal DAAAM Baltc Conference INDUSTRIAL ENGINEERING 24-26 Aprl 2008, Tallnn, Estona SWITCHING PROCESS IN LIMITED SLIP DIFFERENTIAL Resev, J.; Roosmölder, L.; Stas, M. Abstract: The energy flow
More informationEN40: Dynamics and Vibrations. Homework 7: Rigid Body Kinematics
N40: ynamcs and Vbratons Homewor 7: Rgd Body Knematcs School of ngneerng Brown Unversty 1. In the fgure below, bar AB rotates counterclocwse at 4 rad/s. What are the angular veloctes of bars BC and C?.
More informationThe young are not forever young:
The young are not forever young: the assmlaton of young persons n the labour market n France Stephen Bazen and Khald Maman Wazr Paper presented at AMSE-Banque de France Labour Economcs Conference December
More informationSTRUCTURAL CALCULATION
STRUCTURAL CALCULATION Project: Report: BATLab, Geneva Curtan wall System mscellaneous checks Report-No.: M11.114924FE1502-0 rev1 Lndner Fassaden GmbH Swtzerland Offce In der Schappe 16-18 CH 4144 ARLESHEIM
More informationSGF. The metric thread forming connection
SGF The metric thread forming connection Schriever SGF Our challenge: An economical solution Alication: Direct connections in cylindrical bores and casted bores. Schriever SGF -screws are metric thread-forming,
More informationIntroduction to Vapor/Liquid Equilibrium, part 2. Raoult s Law:
CE304, Sprng 2004 Lecture 4 Introducton to Vapor/Lqud Equlbrum, part 2 Raoult s Law: The smplest model that allows us do VLE calculatons s obtaned when we assume that the vapor phase s an deal gas, and
More informationLinear Momentum. Center of Mass.
Lecture 6 Chapter 9 Physcs I 03.3.04 Lnear omentum. Center of ass. Course webste: http://faculty.uml.edu/ndry_danylov/teachng/physcsi Lecture Capture: http://echo360.uml.edu/danylov03/physcssprng.html
More informationKernel Methods and SVMs Extension
Kernel Methods and SVMs Extenson The purpose of ths document s to revew materal covered n Machne Learnng 1 Supervsed Learnng regardng support vector machnes (SVMs). Ths document also provdes a general
More information