4" 5*7 Dot Matrix Display Information Board User s Guide
|
|
|
- Maximilian Fields
- 6 years ago
- Views:
Transcription
1 " * Dot Matrix Display Information Board User s Guide Sure Electronics Inc. DE-DP0-Ver.0
2 " * DOT MATRIX DISPLAY INFORMATION BOARD USER S GUIDE Table of contents Chapter. Overview and Main Feature Gallery Main Feature... Chapter. Hardware Detail Schematic Physical Dimension Electric Characteristics Port Definition Applications Information... Chapter. Contact Us... Chapter. Appendix Sure Electronics Inc. DE-DP0-Ver.0-page i
3 " * DOT MATRIX DISPLAY INFORMATION BOARD USER S GUIDE Table of contents NOTES: Product Version : Ver.0 Document Version : Ver.0 DE-DP0-Ver.0-page ii Sure Electronics Inc.
4 " * DOT MATRIX DISPLAY INFORMATION BOARD USER S GUIDE Chapter. Overview and Main Feature inch * Dot Matrix Display Boards are manufactured by Sure Electronics. They can be driven by SPI like interface. They can be easy interfaced to any Microcontrollers. They can be widely used in panel meter, big clocks and any other information display usage. Sure Electronics provides series of such * Dot Matrix Display Boards which are supposed to reduce your development time and make them standard. In this series, there are.inch, inch and inch display boards. They can display all the ASCII characters. If any special characters and special size ones are needed, you could contact us with the contact information at the end of this document. -. Gallery Figure Sure Electronics Inc. DE-DP0-Ver.0-page
5 Overview and Main Feature -. Main Feature * Dot Matrix display with HC shift register to store latched data. All ASCII characters are stored inside the PICF microcontroller. Some special characters besides ASCII codes are memorized in PICF for displaying, and listed in the character map. PWM signal can be supplied to control brightness of Dot Matrix information segments. Power can be supplied and data can be transmitted by IDC sockets from microcontrollers. Auxiliary power supply terminal blocks may be needed when connected to next matrix board. For over matrix boards serialized, those aux power input terminals must be used, if not, the final ones in the chain will be dimming. DE-DP0-Ver.0-page Sure Electronics Inc.
6 " * DOT MATRIX DISPLAY INFORMATION BOARD USER S GUIDE Sure Electronics Inc. DE-DP0-Ver.0-page -. Schematic Figure () Schematic for inch Dot Matrix Segment Chapter. Hardware Detail MCLR RB/PGC RC J CON0B 0 RB/PGD + C V/uF C 0 line DIMM_IN DIMM DIMM line RC0 Q FDN0P DIMM MCLR RB RB RC R RC DIMM_IN C 0 RB DATA_OUT UA HC0/SO DIMM RC CLK_OUT R DIMM_OUT RB R 0 CLK_OUT DATA_OUT DATA_IN +V +V R 0 + C V/uF Q FDN0P Q FDN0P +V row R0 0 RA UC HC0/SO 0 DIMM_IN RC C 0 RC RC CLK_IN RB line row RB0 RB/PGC U M0/TO VIN GND VOUT R RC0 RB/PGD C 0 J CON C 0 MCLR C pf UD HC0/SO DIMM_IN + C V/uF U PICF 0 0 RB RB/ICSPCLK RB/ICSPDAT RC0 RC RC RC RC RC RC RC OSC/CLKOUT OSC/CLKIN MCLR/VPP RA0 RA RA RA RB0 RB RB RB RB T0CKI VDD N/C VSS N/C U ULN00 0 COM B B C B C B B B E B C C C C C J CON DIMM RA0 RC row CLK_OUT R 0 line DIMM_OUT RB CLK_IN RA RC RA RB RC DIMM RB RC C0 0 UB HC0/SO +V +V +V UA HC0/SO R 0 RB0 RA OSC/CLKIN C 0 UC HC0/SO 0 DIMM_IN DIMM_IN D N +V line DATA_IN UB HC0/SO +V RA0 UD HC0/SO U HC 0 GND CLK CLR VCC QA QB QC QD QE QF QG QH A B Q FDN0P DATA_OU RB/PGC T U ULN00 0 COM B B C B C B B B E B C C C C C row DIMM DIMM RB DIMM J CON0B 0 Q FDN0P C 0 RB R 0 + C 0V/00UF row row RA C 0 row DIMM_IN RC J con RA R 0 DIMM RB/PGD
7 Hardware Detail Sure Electronics Inc. DE-DP0-Ver.0-page Figure () Schematic for inch Dot Matrix Segment line D D D R0 0R D0 R 0R R 0R D D R 0R R0 0R R 0R D D0 R 0R D D D0 row row R 0R D D D R 0R R 0R R 0R D R 0R D R0 0R D R 0R D R 0R D Common Cathode Column R 0R R 0R D D D0 D D D R 0R D D R 0R D D R 0R R 0R D D D0 R 0R R 0R R 0R line D0 R 0R D R 0R R 0R D D D D D R0 0R D R 0R R 0R R 0R R 0R R 0R D D D D D0 D R 0R R0 0R D R 0R D D0 line row D D R 0R D D D D D R 0R D R0 0R D D R 0R D row D R 0R D0 R 0R D0 D0 Common Anode Row R 0R D line D D D row D D D0 D line D D00 D D D row D R 0R D D D D R 0R D0 D R 0R D D D D D D D D D D D R 0R D R 0R R 0R D D D D D D D D R 0R D D0 D R 0R D D0 R 0R R 0R D D0 R 0R D R0 0R D R 0R D D R 0R D D D0 R 0R D R 0R R 0R D R 0R R 0R R 0R row D D0 D D D0 D D D R 0R R 0R D D R 0R D D D D0 D D R 0R R 0R D0 R 0R R 0R D D D0
8 Hardware Detail Note:. Because of the 's voltage drop difference, the resistance may vary from the value marked in the schematic. For White, Blue, Green and Pink, UV s, the voltage drop is around.volts, and for Red, Yellow, Orange, the voltage drop is.0 Volts or so.. The above schematics are just for reference. There may be a little difference in production batch Emitting Color White Red Blue Green Orange Yellow Pink Forward Voltage.0~..~..~..0~..~..~..~. (V) Current-limiting Resistance (Ω) -. Physical Dimension Figure Physical Dimension for inch Dot Matri Sure Electronics Inc. DE-DP0-Ver.0-page
9 Hardware Detail -. Electric Characteristics Maximum clock freq: MHz, up to 0 boards serialized. 00 khz, up to 0 boards serialized. Suggesting Refresh Rate: Less than 0 frames if DIMM is not used. Less than 0 frames if DIMM is used. Absolute Maximum Ratings at Ta= Parameter Symbol Absolute Maximum Rating Units Average Current IF 00 ma Peak Current IFP 00 ma Working Voltage Vin V Power Dissipation PD 00 mw Operating Temperature Topr -0~+0 Storage Temperature Tstg -~+ work current Iw 0mA on each, / duty * IFP Conditions: Pulse Width 0m sec. and Duty /0 -. Port Definition Figure Bottom Figure of.inch Dot Matrix DE-DP0-Ver.0-page Sure Electronics Inc.
10 Hardware Detail Part Pin Name Function ICSPCLK Programming port for PICF ICSPDAT Programming port for PICF J GND Programming port for PICF v Programming port for PICF MCLR Programming port for PICF NC Programming port for PICF, PWR Power Supply, +V,,,, GND Ground J Dimmin PWM Signal Input for Brightness Control, Active High for full brightness, Datain Data Input 0 Clkin Clock Input, PWR Power Supply,,,, GND Ground reference J Dimmout PWM Signal Output for Brightness Control Dataout Data Output 0 Clkout Clock Output J Auxiliary Power Supply, +V J Auxiliary Power Supply, +V Sure Electronics Inc. DE-DP0-Ver.0-page
11 Hardware Detail -. Applications Information Figure Dimmin port is for PWM signal input to control brightness. Figure DE-DP0-Ver.0-page Sure Electronics Inc.
12 " * DOT MATRIX DISPLAY INFORMATION BOARD USER S GUIDE Chapter. Contact Us Sure Electronics Co., Ltd. Floor, A zone, Qinhuai Technology Innovation center, NO.0-, DaMing Road, Nanjing, China Tel: Website: (English service, from GMT-0AM, only for technical questions) support@sure-electronics.net Sure Electronics Inc. DE-DP0-Ver.0-page
13 " * DOT MATRIX DISPLAY INFORMATION BOARD USER S GUIDE Chapter. Appendix CHARACTER MAP DE-DP0-Ver.0-page Sure Electronics Inc.
1.5 Character Height 7-Segment LED Information Board User s Guide
. Character Height -Segment LED Information Board User s uide 00-00 Sure Electronics Inc. DE-DP00-Ver.0 . Character Height -Segment LED Information Board User s uide Table of contents Chapter.Overview
Sure Electronics 1.5inch LED Board User s Guide
Sure Electronics.inch LED Board User s uide Product Name Product ID :.inch Character Height -segment LED Information Board : DE-DP00 Product Version : Ver.0 Document Version : Ver.0 Copyright 00-00 Sure
1.8 Character Height 7-Segment LED Information Board User s Guide
. Character Height -Segment LD Information Board User s Guide 00-00 Sure lectronics Inc. D-DP00-Ver.0 . Character Height -Segment LD Information Board User s Guide Table of contents Chapter.Overview and
LED Display Product Data Sheet LTM-0215F Spec No.: DS Effective Date: 11/12/2003 LITE-ON DCC RELEASE
LED Display Product Data Sheet LTM-0215F Spec No.: DS30-2003-205 Effective Date: 11/12/2003 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road,
Auxiliary Sensors Module
Auxiliary Sensors Module Technical Manual BASM Version 00 BRUKER The information in this manual may be altered without notice. BRUKER accepts no responsibility for actions taken as a result of use of this
EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 162A0(LED TYPES) EXAMINED BY : FILE NO. CAS ISSUE :NOV.18,1999 TOTAL PAGE : 8 APPROVED BY:
EXAMINED BY : FILE NO. CAS-10042 APPROVED BY: EMERGING DISPLAY TECHNOLOGIES CORPORATION ISSUE :NOV.18,1999 TOTAL PAGE : 8 VERSION : 3 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL : 162A0(LED TYPES) FOR MESSRS
9-Channel 64steps Constant-Current LED Driver with SPI Control. Features
BCT3119 with SPI Control General Description The BCT3119 is a constant current driver incorporating shift register and data latch. This CMOS device is designed for LED display applications. The max output
DATA SHEET LDD511/24-XX-PF. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. DUAL DIGIT LED DISPLAY (0.56 lnch) DOC. NO : QW0905-LDD511/24-XX-PF
DUAL DIGIT LED DISPLAY (0.56 lnch) Pb Lead-Free Parts LDD511/24-XX-PF DATA SHEET DOC. NO : QW0905-LDD511/24-XX-PF REV. : A DATE : 25 - Jul. - 2007 Page 1/8 Package Dimensions 25.0(0.984") 8.1(0.319") PIN
IN74HC164А 8-Bit Serial-Input/Parallel-Output Shift Register
TECHNICAL DATA IN74HC164А 8-Bit Serial-Input/Parallel-Output Shift Register High-Performance Silicon-Gate CMOS The IN74HC164 is identical in pinout to the LS/ALS164. The device inputs are compatible with
AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY
AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: AGM1610A SERIES DATE: MAY 09, 2007 1. GENERAL SPECIFICATIONS 1-1 SCOPE: This specification covers the delivery
DECODER I/O DATA CIRCUIT CONTROL CIRCUIT
32K x 8 HIGH-SPEED CMOS STATIC RAM MAY 1999 FEATURES High-speed access time: 10, 12, 15, 20, 25 ns Low active power: 400 mw (typical) Low standby power 250 µw (typical) CMOS standby 55 mw (typical) TTL
SUNLIKE DISPLAY GENERAL SPECIFICATION
GENERAL SPECIFICATION ITEM Product No SC0802EBLB-XA-GB-G DESCRIPTION STN Gray Positive STN Yellow Green Positive STN Blue Negative LCD Type TN Negative TN Positive FSTN Negative White & Black FSTN Positive
5mm Round Lamp LED TLH-W1R5-3831BB. 5mm Round White LED (T-1 3/4) Features. Descriptions. Applications. Device Selection Guide
5mm Round Lamp LED 5mm Round White LED (T-1 3/4) Features Fluorescence Type High Luminous Intensity High Efficiency Emission Color: x=0.29, y=0.30 T-1 3/4 Descriptions The White LED which was fabricated
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED ARRAY LA92B/EG.YG-2 DATA SHEET REV. : A
LED ARRAY LA92B/E.Y-2 DATA SHEET DOC. NO : QW0905-LA92B/E.Y-2 REV. : A DATE : 04 - Jan - 2005 Package Dimensions LIITEK ELECTRONICS CO.,LTD. Page 1/6 7.0 11.72 E,Y 9.02 5.08 2.9 TYP 1 2 3 2.3 3.3 0.3 9.65
SPECIFICATION. Sam Jimmy Lei. PART NO. : LA(C) EWRN 0.54"(13.72mm)DUAL ALPHANUMERIC DISPLAY. Approved by Checked by Prepared by
LEDTECH ELECTRONICS CORP. NANYA ROAD,MUGANG ZHAOQING CITY GUANGDONG CHINA. TEL:86-758-2875541,2870651,2877464,2876185,2877017 FAX:86-758-2878014 Http://www.ledtech.com.tw SPECIFICATION PART NO. : LA(C)5432-11
Display Colors. Outline Dimension. Recommended Driving Condition for Back Light Specifications Min. Typ. Max.
640 x 480 Pixels LCD Color Monitor The is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and is suitable
SPECIFICATION. Tung Andy CJ. PART NO. : LN(M) M1 EWRN 0.56"(14.22mm) THREE DIGIT DISPLAY. Approved by Checked by Prepared by
LEDTECH ELECTRONICS CORP NANYA ROAD,MUGANG ZHAOQING CITY GUANGDONG CHINA TEL:86-758-2875541,2870651,2877464,2876185,2877017 FAX:86-758-2878014 Http://wwwledtechcomtw SPECIFICATION PART NO : LN(M)5673-11-M1
4N25 4N26 4N27 4N28. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) SCHEMATIC. Order this document by 4N25/D STANDARD THRU HOLE
Order this document by N/D GlobalOptoisolator The N, N, N7 and N8 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector. Most
Preliminary Datasheet
Macroblock Preliminary Datasheet Features 3 output channels for RGB D lamps Output current invariant to load voltage change Programmable output current for each channel Built-in brightness control Constant
TDS mm Seven Segment Display. Vishay Telefunken. Description. Features. Applications
mm Seven Segment Display TDS.3.. Color Type Circuitry TDSR35. Common anode TDSR36. Common cathode Orange red TDSO35. Common anode Orange red TDSO36. Common cathode TDSY35. Common anode TDSY36. Common cathode
Respiratory Pressure. Meter Service Manual. Introduction 3. Operation 3. Respiratory Pressure. Meter Layout 4. Cleaning and Maintaining the
Contents page Introduction Operation Respiratory Pressure Meter Layout SNIP MIP / MEP OFF Cleaning and Maintaining the Respiratory Pressure Meter Disassembling the Respiratory Pressure Meter Reassembling
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 1206 Package Chip LED (1.0mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Technical Data Sheet - Preliminary Top View LEDs
Features Top View White LEDs Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant version. Descriptions
NJU BIT PARALLEL TO SERIAL CONVERTER PRELIMINARY PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
PRELIMINARY 11-BIT PARALLEL TO SERIAL CONVERTER GENERAL DESCRIPTION The NJU3754 is an 11-bit parallel to serial converter especially applying to MCU input port expander. It can operate from 2.7V to 5.5V.
EAPL4040WA1. SMD Side View LEDs PRELIMINARY. Features. Applications.
SMD Side View LEDs PRELIMINARY Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. ESD protection. Applications OA
SMBBIR45A Broad band High Power Emitter. AnodeMark 5.2. heatsink
Spectro Series Data Sheet SMBBIRA-00 Broad band High Power Emitter Outline and Internal Circuit anode AnodeMark a cathode. heatsink c land pattern for solder a heat sink..... c (Unit : mm) Features Application
EVERLIGHT ELECTRONICS CO., LTD.
eatures Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free.
DESCRIPTION DECODER I/O DATA CIRCUIT CONTROL CIRCUIT
512K x 16 HIGH SPEED ASYNCHRONOUS CMOS STATIC RAM WITH 3.3V SUPPLY SEPTEMBER 2005 FEATURES High-speed access time: 8, 10, and 12 ns CMOS low power operation Low stand-by power: Less than 5 ma (typ.) CMOS
EVERLIGHT ELECTRONICS CO., LTD.
Features P-LCC-2 package. Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated
VFD- RoHS Compliant M0116MY-161LSBR2-1. User s Guide. (Vacuum Fluorescent Display Module) For product support, contact
User s Guide M0116MY-161LSBR2-1 VF- RoHS Compliant (Vacuum Fluorescent isplay Module) For product support, contact Newhaven isplay International 2511 Technology rive, #101 Elgin, IL 60124 Tel: (847) 844-8795
Technical Data Sheet Side View LEDs (Height 0.6mm)
Features Side view white LED White SMT package Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant
Electrical and Optical Characteristics at IF=750mA and TA=25 C Absolute Maximum Ratings
Table of Contents 1. Product Description 2 2. Outline Dimensions 3 3. Electrical and Optical Characteristics 4 Electrical and Optical Characteristics at IF=75mA and TA=25 C Absolute Maximum Ratings 4.
EVERLIGHT ELECTRONICS CO., LTD.
Features Top View White LEDs Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering ESD protection Pb-free The product itself will remain within RoHS compliant
DEM C TTH-PW-N
Display Elektronik GmbH LCD MODULE DEM 320240C TTH-PW-N 3,5 TFT (Low Reflective) Product Specification Ver.: 0 03.12.2010 Version: 0 PAGE: 1 Revise Records Rev. Date Contents Written Approved 0 03.12.2010
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, SCHOTTKY TTL, FLIP-FLOPS, CASCADABLE, MONOLITHIC SILICON
INCH-POUND 2 November 2005 SUPERSEDING MIL-M-38510/71C 23 July 1984 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, SCHOTTKY TTL, FLIP-FLOPS, CASCADABLE, MONOLITHIC SILICON This specification is
WENRUN OPTOELECTRONIC CO., LTD. Specification. Customer confirm Approved by Checked by Issued by
Specification Client Name: Client P/N: Wenrun P/N: LSD056AAG-101 Date: Customer confirm Approved by Checked by Issued by Tel: 0511-85510030 Fax:0511-85512861 Page 1 of 8 Features: High efficiency, low
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DUAL COLOR LED LAMPS. Lead-Free Parts LEG2092-PF DATA SHEET REV. : A. DATE : 16 - Apr.
DUAL COLOR LED LAMPS Pb Lead-Free Parts LEG2092-PF DATA SHEET DOC. NO : QW0905-LEG2092-PFA REV. : A DATE : 16 - Apr. - 2007 Page 1/6 Package Dimensions 4.0 MAX 4.2 5.2 6.7± G E TYP 18.0MIN 1 2 3 MIN 1
3mm Round Lamp LED TLH-W1R X9. 3mm Round White LED (T-1) Features. Descriptions. Applications. Device Selection Guide
3mm Round Lamp LED 3mm Round White LED (T-1) Features Popular T-1 round package High luminous power Typical chromaticity coordinates x=0.32, y=0.33 according to CIE1931 Bulk, available taped on reel ESD-withstand
SUNLIKE DISPLAY. Model No: SC2004C GENERAL SPECIFICATION
GENERAL SPECIFICATION ITEM Product No SC2004CSLB-XA-LB-G DESCRIPTION STN Gray Positive STN Yellow Green Positive STN Blue Negative LCD Type TN Negative TN Positive FSTN Negative White & Black FSTN Positive
Automotive: Dashboards, stop lamps, turn signals. 2. Backlighting: LCDs, Key pads advertising.
Features: 1. Emitted Color : Super Red 2. Lens Appearance : Water Clear Package Dimensions: 3. Mono-color type. 4. 1.x.5x.4mm(42) standard package 5. Suitable for all SMT assembly methods. 6. Compatible
MM74C912 6-Digit BCD Display Controller Driver MM74C917 6-Digit Hex Display Controller Driver
MM74C912 6-Digit BCD Display Controller Driver MM74C917 6-Digit Hex Display Controller Driver General Description The MM74C912 MM74C917 display controllers are interface elements with memory that drive
Technical Data Sheet Top View LEDs
Features P-LCC-2 package. Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated
Technical Data Sheet Top View LEDs
eatures Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free.
SPECIFICATION. Sam Jimmy Lei PART NO. : LL10000-G EWAK 10 SEGMENT LIGHT BAR. Approved by Checked by Prepared by
SPECIFICATION PART NO. : EWAK Approved by Checked by Prepared by Sam Jimmy Lei Dimensions 1.78 22.86 8.0 0.25 5.08.16 7.62 2.54 25.27 MARK 3.5 MIN. 0.5 2.54X9=22.86 Notes: 1. THE SLPE ANGLE OF ANY PIN
5 8 LED MAX6950/MAX6951 MAX6950/MAX6951 SPI TM QSPI TM MICROWIRE TM 7 LED LED 2.7V MAX LED MAX LED 16 (0-9 A-F) RAM 16 7 LED LED
19-2227; Rev 1; 12/01 +2.7V SPI TM QSPI TM MICROWIRE TM 7 2.7V MAX6950 5 7 40 MAX6951 8 7 64 16 (0-9 A-F) RAM 16 7 EMI ( 1 8 ) 26MHz SPI/QSPI/MICROWIRE +2.7V 16 / EMI 75µA ( ) 16 QSOP PART TEMP. RANGE
IS61C K x 16 HIGH-SPEED CMOS STATIC RAM
ISC K x HIGH-SPEED CMOS STATIC RAM FEATURES High-speed access time: 0,,, and 0 ns CMOS low power operation 0 mw (typical) operating 0 µw (typical) standby TTL compatible interface levels Single V ± 0%
Technical Data Sheet Mini Top View LEDs
Features White SMT package. Optical indicator. Wide viewing angle. Soldering methods: IR reflow soldering Available on tape and reel Pb-free The product itself will remain within RoHS compliant version.
Product Specification Thermal Print Head Model: MT-S2-8-5ES1 Rev:
Product Specification Thermal Print Head Model: MT-S2-8-5ES1 Rev: 0086-6 Thermal Print Head Page 1 of 10 1. Description The specification is applicable to thermal print head, model MT-S2-8-5ES1, on which
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. LED ARRAY Pb. Lead-Free Parts LA224W/YG-PF DATA SHEET REV. : B
LED ARRAY Pb Lead-Free Parts LA224W/YG-PF DATA SHEET DOC. NO : QW0905-LA224W/YG-PF REV. : B DATE : 20 - Dec. - 2005 Page 1/6 Package Dimensions 7.5 4.2± 6.0 5.8 4.0± 4TYP 6.4 1 2 3 4TYP 5.25± Y G + - +
IS61LV K x 16 LOW VOLTAGE CMOS STATIC RAM
ISLV K x LOW VOLTAGE CMOS STATIC RAM FEATURES High-speed access time: 0,,, and 0 ns CMOS low power operation 0 mw (typical) operating 0 µw (typical) standby TTL compatible interface levels Single.V ± 0%
FOR MESSRS : DATE : Oct. 26 th,2017 TECHNICAL DATA TX16D201VM0BAB. Contents
TENTATIVE FOR MESSRS : DATE : Oct. 26 th,2017 TECHNICAL DATA TX16D201VM0BAB Contents No. ITEM No. PAGE 1 COVER 7B64LTD-2567-1 1-1/1 2 RECORD OF REVISION 7B64LTD-2567-1 2-1/1 3 GENERAL DATA 7B64LTD-2567-1
3mm Dome Power LED TLH-M1W3-ZAEG. 3mm Dome Power LED. Features. Applications. Device Selection Guide. High Luminance. Low profile
3mm Dome Power LED Features High Luminance Low profile Low thermal resistance Design for high current operation RoHS compliance Piranha Applications Automotive exterior lighting Electronic signs and signals
MM54HC73 MM74HC73 Dual J-K Flip-Flops with Clear
MM54HC73 MM74HC73 Dual J-K Flip-Flops with Clear General Description These J-K Flip-Flops utilize advanced silicon-gate CMOS technology They possess the high noise immunity and low power dissipation of
TFT Proto 5 TFT. 262K colors
TFT Proto TFT K colors Introduction to TFT Proto Figure : TFT Proto board TFT Proto enables you to easily add a touchscreen display to your design, whether it s a prototype or a final product. It carries
YBR-12FRW00-C. ø12mm bi-color LED (common cathode)
Features: 1) Chip Material: AlGaInP & InGaN 2) Lens Color: Water Clear 3) Source Color: Red & White 4) Pb free 5) The product itself will remain within RoHS compliant version. Dimensions: 13.4 11.5 13.6
P8X32A-Q44 SchmartBoard (#27150)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (9) - Fax: (9) -00 Sales: () -0 Tech Support: () 99- PXA-Q SchmartBoard (#0) Want
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED ARRAY. Lead-Free Parts QW0905-LA38W-96/YG-S1-PF DATA SHEET REV.
LED ARRAY Pb Lead-Free Parts LA38W-96/YG-S1-PF DATA SHEET DOC. NO : QW0905-LA38W-96/YG-S1-PF REV. : B DATE : 28 - May. - 2012 發行 立碁電子 DCC Page 1/6 Package Dimensions 4.0 3.5 4.2 5.2 4.2 5.2 G Y 6.0 3.6
1. Automotive : Dashboards, stop lamps, turn signals. 2. Backlighting : LCDs, Key pads advertising. 3. Status indicators : Comsumer & industrial
Features: 1. Emitted Color : Yellow Green Package Dimensions: 2. Lens Appearance : Water Clear. 3. Mono-color type. 4. 3.2x1.6x1.1mm(126) standard package. 5. Suitable for all SMT assembly methods. 6.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. ROUND TYPE LED LAMPS Pb. Lead-Free Parts LI2040-PF DATA SHEET REV. : A
ROUND TYPE LED LAMPS Pb Lead-Free Parts LI2040-PF DATA SHEET DOC. NO : QW0905-LI2040-PF REV. : A DATE : 25 Apr - 2005 Page 1/5 Package Dimensions 3.0 4.0 4.2 5.2 1.5MAX 25.0MIN 0.5 TYP MIN 2.54TYP + -
SERIALLY PROGRAMMABLE CLOCK SOURCE. Features
DATASHEET ICS307-03 Description The ICS307-03 is a dynamic, serially programmable clock source which is flexible and takes up minimal board space. Output frequencies are programmed via a 3-wire SPI port.
S-1000 Series ULTRA-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR. Features. Applications. Packages. Seiko Instruments Inc. 1.
S-1000 Series www.sii-ic.com ULTRA-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR Seiko Instruments Inc., 2004-2015 Rev.3.1_00 The S-1000 series is a series of high-precision voltage detectors developed
S-4670A. 128-bit THERMAL HEAD DRIVER FEATURES BLOCK DIAGRAM. Rev. 1.1
Rev. 1.1 128-bit THERMAL HEAD DRIVER S-4670A The S-4670A is a CMOS thermal head driver containing 128-bit (64 x 2) shift registers and latches. High speed operation at 16 MHz clock frequency together with
LMBZ52xxBLG Series. 225 mw SOT 23 Surface Mount LESHAN RADIO COMPANY, LTD. 1/6
5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage regulation with minimum space requirement.
MICROCIRCUITS, DIGITAL, TTL, FLIP-FLOPS, MONOLITHIC SILICON. Inactive for new design after 7 September 1995
MILITARY SPECIFICATION INCH-POUND MIL-M-38510/2G 8 February 2005 SUPERSEDING MIL-M-38510/2E 24 December 1974 MIL-M-0038510/2F (USAF) 24 OCTOBER 1975 MICROCIRCUITS, DIGITAL, TTL, FLIP-FLOPS, MONOLITHIC
TM04N- General Description
N ( CH Capacitive Touch Sensor Module) N -CH Capacitance Touch Sensor Module with Differential Sensitivity Calibration General Description The N Touch Sensor Module is designed specifically for detecting
SPECIFICATION FOR LCD MODULE MODULE NO: AMC2004A-SPI REVISION NO: 00. Customer s Approval:
SPECIFICATION FOR LCD MODULE MODULE NO: REVISION NO: 00 Customer s Approval: PREPARED BY (RD ENGINEER) CHECKED BY APPROVED BY SIGNATURE DATE DOCUMENT REVISION HISTORY: DATE PAGE DESCRIPTION 2013.2 - First
HB56A1636B/SB-6B/7B/8B
16,777,216-word 36-bit High-Density Dynamic RAM Module ADE-203-591A(Z) Rev. 1.0 05/10/96 Description The HB56A1636 is a 16-Mbit 36 dynamic RAM module, consisting of 36 16-Mbit DRAMs (HM5116100BS) sealed
SA CH SEGMENT /COMMON DRIVER FOR DOT MATRIX LCD
A06 A06 0 H EGMENT /OMMON RIVER FOR OT MATRIX L Ver. July, 000 A06 INTROUTION The A06 is an L driver LI which is fabricated by low power MO high voltage process technology. In segment driver mode, it can
ENGR-4300 Fall 2008 Test 3. Name SOLUTION. Section 1(MR 8:00) 2(TF 2:00) (circle one) Question I (20 points) Question II (15 points)
ENGR-4300 Fall 008 Test 3 Name SOLUTION Section (MR 8:00) (TF :00) (circle one) Question I (0 points) Question II (5 points) Question III (0 points) Question I (0 points) Question (5 points) Total (00
DATA SHEET LA256B/3EG-S2-PF 發行 立碁電子 DCC LED ARRAY. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only QW0905-LA256B/3EG-S2-PFB REV.
LED ARRAY Pb Lead-Free Parts LA256B/3EG-S2-PF DATA SHEET DOC. NO : QW0905-LA256B/3EG-S2-PFB REV. : A DATE : 03 - Mar. - 2017 發行 立碁電子 DCC Page 1/8 Package Dimensions Ø 3.35*3 7.00 Ø *3 3.2± 11.6 EG 5.1
DEM B TMH-PW-N
Display Elektronik GmbH LCD MODULE DEM 320240B TMH-PW-N (A-TOUCH) 3,5 TFT with Touch-Panel Product Specification Ver.: 1 27.09.2010 Version: 1 PAGE: 1 Revise Records Rev. Date Contents Written Approved
Document Title 128K X 32 Bit Synchronous High Speed SRAM with Burst Counter and Pipelined Data Output. Rev. No. History Issue Date Remark
12K X 32 Bit Synchronous High Speed SRAM with Burst Counter and Pipelined Data Output Document Title 12K X 32 Bit Synchronous High Speed SRAM with Burst Counter and Pipelined Data Output Revision History
Instruction Manual. DTP Series DC Termination Panels
Instruction Manual DTP Series DC Termination Panels Rev. B /00 DTP Series manual.p CPI Communications, Inc. Hensley Lane Wylie, TX 00 Phone () 0 WATS (00) FAX () 0 or () General Information The CPI Communications
DS34C87T CMOS Quad TRI-STATE Differential Line Driver
DS34C87T CMOS Quad TRI-STATE Differential Line Driver General Description The DS34C87T is a quad differential line driver designed for digital data transmission over balanced lines The DS34C87T meets all
S6B CH SEGMENT / COMMON DRIVER FOR DOT MATRIX LCD
6B006 0 H EGENT / OON RIVER FOR OT ATRIX L June. 000. Ver. 0.0 ontents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by
SC125MS. Data Sheet and Instruction Manual. ! Warning! Salem Controls Inc. Stepper Motor Driver. Last Updated 12/14/2004
SC125MS Stepper Motor Driver Salem Controls Inc. Last Updated 12/14/2004! Warning! Stepper motors and drivers use high current and voltages capable of causing severe injury. Do not operate this product
HM6264A Series. Features. Ordering Information word 8-bit High Speed CMOS Static RAM
8192-word 8-bit High Speed CMOS Static RAM Features Low-power standby 0.1 mw (typ) 10 µw (typ) L-/LL-version Low power operation 15 mw/mhz (typ) Fast access time l00/120/ (max) Single +5 V supply Completely
2SJ332(L), 2SJ332(S)
Silicon P-Channel MOS FET November 1996 Application High speed power switching Features Low on-resistance High speed switching Low drive current 4 V gate drive device can be driven from V source Suitable
Table of Contents 1. Product Description 2 2. Outline Dimensions 3 3. Electrical and Optical Characteristics 4
Table of Contents 1. Product Description 2 2. Outline Dimensions 3 3. Electrical and Optical Characteristics 4 Electrical and Optical Characteristics at TA=25 C Absolute Maximum Ratings 4. Typical Characteristics
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LIGHT BAR LED DISPLAY. Lead-Free Parts DATA SHEET LBD711SBK-XX-PF REV. : A
LIGHT BAR LED DISPLAY Pb Lead-Free Parts DATA SHEET DOC. NO : QW95- REV. : A DATE : 17 - Oct. - 25 Page 1/7 Package Dimensions LIGITEK ELECTRONICS CO.,LTD. 2.35(.81") 19±.25 6.3(.248") 5. (.197") LIGITEK
SRM2264L10/12 CMOS 64K-BIT STATIC RAM. Low Supply Current Access Time 100ns/120ns 8,192 Words 8 Bits, Asynchronous DESCRIPTION
DESCRIPTION SRM2264L10/12 CMOS 64K-BIT STATIC RAM Low Supply Current Access Time 100ns/120ns 8,192 Words 8 Bits, Asynchronous The SRM2264L10/12 is an 8,192-word 8-bit asynchronous, static, random access
UNISONIC TECHNOLOGIES CO., LTD L16B45 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD L16B45 Preliminary CMOS IC 16-BIT CONSTANT CURRENT LED SINK DRIVER DESCRIPTION The UTC L16B45 is designed for LED displays. UTC L16B45 contains a serial buffer and data latches
1. CONSTRUCTION Pink surface mount LEDs with reflector packaged featuring InGaN on SiC and phosphor technology.
1. CONSTRUCTION Pink surface mount LEDs with reflector packaged featuring InGaN on SiC and phosphor technology. 2. USAGE Source of light for display unit. 3. DIMENSIONS See Figure.1 4. ABSOLUTE MAXIMUM
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. LED ARRAY Pb. Lead-Free Parts DATA SHEET LA285B/GHYY-PF REV. :
LED ARRAY Pb Lead-Free Parts LA285B/GHYY-PF DATA SHEET DOC. NO : QW0905-LA285B/GHYY-PF REV. : A DATE : 22 - Oct. - 2007 Page 1/7 Package Dimensions 0.6 17 14 0.6 3.2 5±0.3 6.65 7.1 0.8 G H Y Y 4.875 4TYP
SMD B EASV1003WA1. Applications Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol.
SMD B Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product
Specification for Approval
Customer : Specification for Approval Part Name : (Preliminary) Customer : 2015... Checked Checked Approved Remark / / / WOOREE E&L Co., Ltd. 2015. 11. 01. Designed Checked Checked Approved / / / / WOOREE
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. DS0026 Dual High-Speed MOS Driver General Description DS0026 is a low cost
5mm Round Lamp LED TLH-W1R RT. 5mm Round White LED (T-1 3/4) Features. Descriptions. Applications. Device Selection Guide
5mm Round Lamp LED 5mm Round White LED (T-1 3/4) Features Popular T-1 ¾ diameter package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE 1931 Bulk, available on tape
1. Automotive : Dashboards, stop lamps, turn signals. 2. Backlighting : LCDs, Key pads advertising. 3. Status indicators : Comsumer & industrial
Features: 1. Emitted Color : Super Red Package Dimensions: 2. Lens Appearance : Water Clear. 3. Mono-color type. 4. 3.2x1.x1.7mm(124) standard package. 5. Suitable for all SMT assembly methods. 6. Compatible
MM54C14 MM74C14 Hex Schmitt Trigger
MM54C14 MM74C14 Hex Schmitt Trigger General Description The MM54C14 MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement
Suitable for all SMT assembly methods. 6. Compatible with infrared and vapor phase
Features: 1. Emitted Color : and. Package Dimensions: 2. Lens Appearance : Water Clear 3. Bicolor type. 4. 1.6x1.25x.4mm(65) standard package.15 5. Suitable for all SMT assembly methods. 6. Compatible
Description of Terminology 2. Structural Drawing. Reliability Test and Measuring Method 2. Handling Precautions 3
TABLE OF CONTENTS Description of Terminology Structural Drawing Reliability Test and Measuring Method Handling Precautions Super Bright LED Light Bar Module Description of Part Number Characteristics by
KTBCD430-D1. Product. Bi-stable Cholesteric Display Module 128 x 64 Dots Matrix Build In Voltage Booster
PAGE 1 OF 15 KTBCD430-D1 Product Bi-stable Cholesteric Display Module 128 x 64 Dots Matrix Build In Voltage Booster Kentec Electronics (Displays) Limited URL: http://www.kentec.com.hk E-mail: t.liang@kentec.com.hk;
1.0(.039)± R0.25(.010) 2.0(.079)± (.020) Cathode Mark. Cathode
Features: 1. Emitted Color : and 2. Lens Appearance : Water Clear 3. Bicolor type. 4. 3.2x1.x2.mm(124) standard package 5. Suitable for all SMT assembly methods. 6. Compatible with infrared and vapor phase
S.Y. Diploma : Sem. III [DE/ED/EI/EJ/EN/ET/EV/EX/IC/IE/IS/IU/MU] Principles of Digital Techniques
![S.Y. Diploma : Sem. III [DE/ED/EI/EJ/EN/ET/EV/EX/IC/IE/IS/IU/MU] Principles of Digital Techniques](/thumbs/82/86792063.jpg "S.Y. Diploma : Sem. III [DE/ED/EI/EJ/EN/ET/EV/EX/IC/IE/IS/IU/MU] Principles of Digital Techniques")
S.Y. Diploma : Sem. III [DE/ED/EI/EJ/EN/ET/EV/EX/IC/IE/IS/IU/MU] Principles of Digital Techniques Time: 3 Hrs.] Prelim Question Paper Solution [Marks : 100 Q.1(a) Attempt any SIX of the following : [12]
2SJ280(L), 2SJ280(S)
Silicon P-Channel MOS FET November 1996 Application High speed power switching Features Low on-resistance High speed switching Low drive current 4 V gate drive device can be driven from 5 V source Suitable
ADC Bit, 50MHz Video A/D Converter
ADC- -Bit, 0MHz Video A/D Converter FEATURES Low power dissipation (0mW max.) Input signal bandwith (00MHz) Optional synchronized clamp function Low input capacitance (pf typ.) +V or +V /+.V power supply
3mm Round Lamp LED TLH-W1R QS. 3mm Round White LED (T-1) Features. Descriptions. Applications. Device Selection Guide
3mm Round Lamp LED 3mm Round White LED (T-1) Features Popular T-1 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel ESD-withstand