Directional spool valve types WMM10 hand lever operated WMD10 rotary knob operated WMR10 roller operated WH10 hydraulically operated NS10
|
|
- Darren Reed
- 6 years ago
- Views:
Transcription
1 Directionl spool vlve types MM10 hnd lever operted MD10 rotry kno operted MR10 roller operted H10 hydruliclly operted NS10 up to 31,5 M up to 10 dm 3/min K LICION Directionl spool vlves re intended for chnge in direction of fluid flow in hydrulic system nd thus it llows to chnge direction of movement of receiver - mostly piston rod of cylinder or hydrulic motor s well to use functions: on nd off. Directionl spool vlves cn e mde in differently operted design versions: hnd lever operted type MM10 rotry kno operted type MD10 roller operted type MR10 hydruliclly operted type H10 he directionl vlves re intended for suplte mounting in ny position in hydrulic system. DESCRIION OF OERION Generl informtion Min ore nd nnulr ports,,, re mde in the housing (1) nd connected to its suplte connection. Directionl vlve is switched y shifting the spool () into one end position. Vrious control functions result from the shpe of control spool () which ffects the chnge in configurtion of the connections etween ports,, nd in the housing (1). 4MM10 E -1/... Directionl spool vlve - hnd lever operted type MM10 he spool () is shifted y chnging the position of hnd lever (3) y mens of the pin (4). he spool return () to its rest position is secured y centering springs (5) version MM10-1/. ositions of the spool cn e fixed y mens of the detent (6) s well version MM10-1/F Directionl spool vlve my e provided with the orifice (7) plced in port version MM10-1/ MM10 E -1/F... 4MM10 E -1/ ype MM10/MD10/MR10/H10-1 -
2 DESCRIION OF OERION Directionl spool vlves - rotry kno operted type MD10 4MD10 E -1/F... he spool () is shifted y mens of rotry kno (3) through the spindle (4) nd y mens of the plunger (5). he spool is positioned y mens of detent (6). Directionl spool vlve my e provided with orifice (7) plced in port version MD10-1/F MD10 E -1/F... Directionl spool vlve - roller operted type MR10/MU10 he spool () is shifted y mens of the pin (3) with the roller (4) t the end of pin, through the plunger (5). Spool return () to its rest position is secured y the spring (6) version MR10-1/. he roller (4) my e mounted horizontlly or verticlly. he chnge of position is secured y rotting the pin (3) with roller (4). Screw (8) serves to fix position of the pin (3). Directionl spool vlve my e provided with orifice (7) plced in port version MR -1/. 4MR10 E -1/ MR10 E -1/ Directionl spool vlve - hydruliclly operted type H10 he spool () is shifted y mens of the pressure supplied to connections of the cps (3) nd thus it llows to move spools (4) nd plunger (5). Spool return () nd its centering in neutrl position (3-position directionl vlves) is secured y the springs (6) version H10-1/ or fixing end of the spool (-position directionl vlves) is secured hydruliclly (with oil pressure) version H6-1/O or y mens of detent version H6-1/OF OF. Directionl spool vlve my e provided with orifice (7) plced in port version H6-1/. 4H10 E -1/ H10 E -1/ ype MM10/MD10/MR10/H10
3 ECHNICL D Hydrulic fluid Required filtrf ltrt tion Recommended filtrtion Viscosity rnge mient temperture rnge Fetures Switching force ightening torque of rotry kno Mx ng ngle of f contro trol l cmc eight Flow section in 0 (centrl) position minerl oil up to t 16 µm up to 10 µm Nominl fluid viscosity o 37 mm /s t temperture 55 C Fluid temperture rnge (in tnk) Mx opert ting pressure Contro trol l pressure,8 up to 380 mm /s recommended o o 40 C up to 55 C mx -0 C up to +70 C o o - 0 C up to +70 C type MM10 ports,, type MD10 type H10 31, 1,5 M 16 M 31, 1,5 M 16 M 31, 1,5 M 16 M 31, 1,5 M 16 M _ spring centering 0-7 N positioned with detent 16-3 N 4 kg spool type flow direction flow section o ports,, 3,7 kg o type MR10 ports,, _ 3,6 kg min 0,5 M mx x 6, 0 M Ncm Q -position version N 3-position version N 30 o ports,, _ version with control ports 3,8 kg version with 1 control port 3,4 kg V 5,5 mm,5 mm 11 mm 10 mm ype MM10/MD10/MR10/H10-3 -
4 SCHEMES Directionl spool vlve - hnd lever operted type...mm x/... Grp phic sym ymols of 3-p -posit ition directionl spool vlves MM X/... MM X/F... Grp phic sym ymols of spools 0 0 Grp phic sym ymols of -p -posit ition directionl spool vlves versions with, 0 MM X/... MM X/F versions with 0, MM X/... MM X/F E F G H J L M Q R U V E F G H J L M Q R U V E F G H J L M Q R U V NOE: Flow sections in 0 (centrl) position for spools: Q,, V ccording to technicl dt on pge ype MM10/MD10/MR10/H10
5 SCHEMES Directionl spool vlve - hnd lever operted type...mm x/... Grph phic symols of f -positi sition directionl spool vl lves versions with, MM X/... MM X/F... Grph phic symols of spools versions with, MM X/... MM X/F... C D Y Directionl spool vlve - rotry kno operted type... MD X/... Grphic c symols of -p -positi sition directionl spool vl lves versions with, MD X/F... Grphic c symols of f spools C D ype MM10/MD10/MR10/H10-5 -
6 SCHEMES Directionl spool vlve - rotry kno operted type... MD X/... Grphic sym mols of 3-p -positi sition directionl spool vl lves MD X/F... 0 MD X/F... Grphic sym mols of -p -positi sition directionl spool vl lves versions with, 0 MD X/F... 0 versions with 0, 0 Grphic sym mols of spools E F G H J L M Q R U V E F G H J L M Q R U V E F G H J L M Q R U V NOE: Flow sections in 0 (centrl) position for spools: Q,, V ccording to technicl dt on pge ype MM10/MD10/MR10/H10
7 SCHEMES Directionl spool vlve - roller operted type... MR X/... Grphic symols of 3-p -pos osit ition direction onl l spool vlves ves MR X/... 0 Grph phic symols of f -positi sition directionl spool vl lves MR X/... Grphic symols of f spools 0 0 E F G H J L M Q R U V C D Y NOE: Flow sections in 0 (centrl) position for spools: Q,, V ccording to technicl dt on pge 3 ype MM10/MD10/MR10/H10-7 -
8 SCHEMES Directionl spool vlve - hydruliclly operted type...h x/... Grp phic sym ymols of 3-p -posit ition directionl spool vlves Grp phic sym ymols of -p -posit ition directionl spool vlves versions with, 0 versions with 0, H X/... 0 H X/... 0 H X/... 0 Grp phic sym ymols of spools E F G H J L M Q R U V E F G H J L M Q R U V E F G H J L M Q R U V NOE: Flow sections in 0 (centrl) position for spools: Q,, V ccording to technicl dt on pge ype MM10/MD10/MR10/H10
9 SCHEMES Directionl spool vlve - hydruliclly operted type...h x/... Grphic c symols of -p -positi sition directionl spool vl lves versions with, H X/... H X/O... H X/OF OF... versions with, H X/... Grphic c symols of f spools C D Y ype MM10/MD10/MR10/H10-9 -
10 OVERLL ND CONNECION DIMENSIONS Directionl spool vlve - hnd lever operted type...mm x/... ~30 ~115 ~ O11-4 depth holes O6,6-4 holes 340 ~ 0 /0 /0 3-position directionl vlves 3-position directionl vlves with spools:,c,d / E... 3-position directionl vlves with spools:, Y / E , Hnd lever - Hnd lever (optionlly mounted) 3 - Seling ring o-rin -ring 1 x - 5 pcs/kit (,,,, ) 4 - Overll dimension of directionl spool vlve: 3-posit 3-positio ion n directionl spool vlve springs centered 3-positi position on directionl spoo l vlve pos itioned with d etent (spool schemes:e,f,g,h,j,l,m,q,r,,u,v, - pge 4) -positi position on directionl spoo l vlve pos itioned with spring -positi position on directionl spoo l vlve positi itioned with d etent (, - spool schemes:,c,d - pge 5), 0 - spool schemes: E,F,G G,H,J, L,M,,Q Q,R R,,U U,V, - pge 4 0, - spool schemes: E,F F,G G,H H,J J, L, M,,Q Q,R R,,U U,V, - pge 4) 5 - Overll dimension of directionl spool vlve: -positi position on directionl spoo l vlve pos itioned with spring -positi position on directionl spoo l vlve pos itioned with d etent (, - spool schemes:,y - pge 5) 6 - ositions of hnd lever 7 - orting pttern - configurtion of connection holes in suplte in ccordnce with the following stndrds: CEO O R 11H - identified y CEO O (nominl size CEO O 05) ISO identified y ISO (*) - connection with 1 hole from port side or is sufficient - holes nd re connected to the port in the housing of directionl spool vlve mounting olts M6 6 x in ccordnce with N -EN ISO pcs/kit, tightening torque Md = 15 Nm 8 - Suplte surfce required 1,4 3,5 46 6,3 167 M6 depth 1-4 holes 69,5 min O11, (mx)- 4 holes* (,,, ) , ,8 37,3 7 16,7 3,* min 91 r 0,01/100 mm 0, , ype MM10/MD10/MR10/H10
11 OVERLL ND CONNECION DIMENSIONS Directionl spool vlve - rotry kno operted type...md x/ , (stroke) 4, (stroke) O11-4 depth holes O6,6-4 holes , 0 0 /0 4, 3-position directionl vlves -position directionl vlves with spools:, C, D/ E... -position directionl vlves with spools: E... 0 / 35, , ,5 M6 depth 1-4 holes 69,5 min 1,4 3,5 46 6,3 O11, (mx)- 4 holes* (,,, ) o ,8 37,3 7 16,7 3,* min 91 r 0,01/100 mm 0, o Rotry kno - Seling ring o-rin -ring 1 x - 5 pcs/kit (,,,, ) 3 - Stroke of rotry kno for 3-p -posit ition directionl spool vlve (spool schemes:e,f,g,h,j,l,m,q,r,,u,v,- pge 6) 4 - Stroke of rotry kno for -p -posit ition directionl spool vlve (, 0 - version MD10... spool schemes: E,F F,G,H,J,L L,M,,Q Q,R,, U,V, - pge Stroke of rotry kno for -p -position directionl spool vlve ( 0, - version MD10... spool schemes: E,F F,G,H H,J J,L L,M M,,Q Q,R R,, U,V V, - pge 6;, - spool schemes:,c,d - pge 5) 6 - ositions of rotry kno 7 - orting pttern - configurtion of connection holes in suplte in ccordnce with the following stndrds: CEO R 11H - identified y CEO (nominl size CEO 05) ISO identified y ISO (*) - connection with 1 hole from port side or is sufficient - holes nd re connected to the port in the housing of directionl spool vlve mounting olts M6 x in ccordnce with N - EN ISO pcs/kit ightening torque Md = 15 Nm 8 - Suplte surfce required ype MM10/MD10/MR10/H
12 OVERLL ND CONNECION DIMENSIONS Directionl spool vlve - roller operted type... MR X/ O11-4 depth holes O6,6-4 holes 7,5 O ,3 mx cklsh for 3-position directionl spool vlves 4 87,5 (mx) 3-position directionl spool vlves 83,3 (mx) -position directionl spool vlves (,C,D) ~184,8 (mx) ~189 (mx) , 6 0 4, 3-position directionl spool vlves mx cklsh for -position directionl spool vlves 4, M6 depth 1-4 holes 69,5 min 1,4 3,5 46 -position directionl spool vlves 6,3 O11, (mx)- 4 holes* (,,, ) 54 50,8 37,3 7 16,7 3,* min 91 r 0,01/100 mm 0,63 30v(mx) ,5 46 -position directionl spool vlves (,Y) 83,3 (mx) ~ 184,8 (mx) 69,5 1 - in with roller - Screw fixing the position of the pin with roller 3 - in with roller (item 1) - optionlly mounted fter screwing off the screw - item ) 4 - Seling ring o-rin -ring 1 x - 5 pcs/kit (,,,, ) 5 - Stroke of roller for 3-p -positi sition directionl spool vl lve (spool schemes: E,F,G,H,J,L,M,Q,R,,U,V, - pge 7) 6 - Stroke of roller for -p -positi sition directionl spool vl lve (spool schemes:,c,d,,y - pge 7) 7 - Overll dimension of 3-p -position direc irection nl spool vl lve 8 - Overll dimension of -p -position direc irection nl spool vl lve (spool schemes:,c,d - pge 7) 9 - Overll dimension of -p -position direc irection nl spool vl lve (spool schemes:,y - pge 7) 10 - Mx ngle of control cm 11 - orting pttern - configurtion of connection holes in suplte in ccordnce with the following stndrds: CEO R 11H - identified y CEO (nominl size CEO 05) ISO identified y ISO (*) - connection with 1 hole from port side or is sufficient - holes nd re connected to the port in the housing of directionl spool vlve mounting olts M6 x in ccordnce with N - EN ISO pcs/kit ightening torque Md = 15 Nm 1- Suplte surfce required ype MM10/MD10/MR10/H10
13 OVERLL ND CONNECION DIMENSIONS Directionl spool vlve - hydruliclly operted type...h x/... O0 gł 1 - depth holes G1/4 gł 1 - connections O11-4 depth holes O6,6-4 holes ,5 5 4 M6 depth 1-4 holes 69,5 min 1,4 3,5 46 6,3 O11, (mx)- 4 holes* (,,, ) ,8 37,3 7 16,7 18,5 3,* min 91 r 0,01/100 mm 0, Cp with control port - Cp with control port 3 - Seling ring o-rin -ring 9, x 1,8-5 pcs/kit (,,,,) 4 - Overll dimension of directionl spool vlve: 3-posit 3-positio ion n directionl spool vlve springs centered (spool schemes: E,F,G,H,J,L,M,Q,R,,U,V, - pge 8) - -positi sition directionl spool vl lve e without springs nd without detent ent (spool schemes:,c,d - pge 9) -p -positi sition directionl spool vl lve e without springs nd with detent (spool schemes:,c,d - pge 9) 5 - Overll dimension of directionl spool vlve: -p -position direc irection nl spool vl lve positione ned with sprin pring (położeni, 0 - spool schemes: E,F,G G,H, J,L,M,Q Q,R R,,U U,V, - pge 8, - spool schemes:,c,d - pge 9) 6 - Overll dimension of directionl spool vlve: -p -position direc irection nl spool vl lve positione ned with sprin pring ( 0, - spool schemes: E,F F,G G,H, J,L L,M M,Q Q,R R,,U U,V, - pge 8, - spool schemes:,y - pge 9) 7 - orting pttern - configurtion of connection holes in suplte in ccordnce with the following stndrds: CEO R 11H - identified y CEO (nominl size CEO 05) ISO identified y ISO (*) - connection with 1 hole from port side or is sufficient - holes nd re connected to the port in the housing of directionl spool vlve mounting olts M6 x in ccordnce with N - EN ISO pcs/kit ightening torque Md = 15 Nm 8 - Suplte surfce required ype MM10/MD10/MR10/H
14 p [M] ERFORMNCE CURVES o mesured t viscosity ν = 41 mm /s nd temperture t = 50 C Flow resistnce curves type MM /..., MM /F... type MD /F... type MR type H /..., H /O..., H /OF... Chrcteristic curves p(q) for directionl spool vlves with vrious spool types 1,4 1,3 1, 1,1 1,0 0,9 0,8 0,7 0,6 0,5 0,4 0,3 0, 0, Q [dm /min] Spool type Chrcter cteristi istic curve numer end position - flow direction scheme - pge 3 R Spool type Spool ol type schemes pge - 3, 4, C D, Y E F G H J L M Q R centrl position - 0 schemes-pge3 F G, H U, V Chrk hrkteristic c urve numer flow direction Chrkte kteris ristic curve numer flow direction Flow limits curves type H /..., H /O..., H /OF... Chrcteristic curves p-q for directionl spool vlves with vrious spools p [M] Spool ol type schemes - pge 8, 9 D, D/O, D/OF E, M, V J, L, Q, U,, C, C/O, C/OF, Y, Y/O, Y/OF H /O, /OF F, G,, R, Chrcteris tic curve numer Q [dm NOES: ove flow limits re relted to symmetricl flow through ll ports i.e. if the oil flows from port to port, then the sme flow rte is from port to port (pplied to directionl control vlves with 4 service ports). Degree of symmetry ffects dversely the prmeters. ype MM10/MD10/MR10/H
15 HO O ORDER Numer of service ports 3-wy - for spools, = 3 4-wy - the other spools = 4 10 * ype of opertion hnd lever operted rotry kno operted roller operted hydruliclly operted = MM = MD = MR = H Nominl size (NS) NS10 = 10 Spool type spool schemes for directionl spool vlve: type MM - ccording to pge 4, 5 type MD - ccording to pge 5, 6 type MR - ccording to pge 7 type H - ccording to pge 8, 9 Series numer (10-19) - connection nd instlltion dimensions unchnged = 1X series 1 = 1 Spool positioning spring centering - ville to directionl spool vlves type: MM, MR, H = no designtion with detent - ville to directionl spool vlves type: MM, MD = F without return springs, without detent - ville only to directionl spool vlves type H = O without return springs, with detent - ville only to directionl spool vlves type H = OF hrottle insert (in port ) without throttle insert = no designtion throttle insert φ 0,8 = 08 throttle insert φ 1,0 = 10 throttle insert φ 1, = 1 throttle insert φ 3,0 = 30 Seling NR (for fluids on minerl oil se) FM (for fluids on phosphte ester se) = no designtion = V Further requirements in cler text (to e greed with the mnufcturer) NOES: Directionl spool vlve should e ordered ccording to the ove coding. he symols in old re preferred versions in short delivery time. Coding exmples: 4MM10 J -1/08; 4MD10E -1/F 08; 4MR10E -1/08; 4H10 J -1/08 ype MM10/MD10/MR10/H
16 SULES ND MOUNING OLS Supltes must e ordered ccording to the dt sheet K Supltes: G 66/01 - threded connection G 3/8 G 67/01 - threded connection G 1/ G 89/01 - threded connection G1/4 G 67/0 - threded connection M x1, 1,5 Supltes nd olts fixing directionl vlve M6 x 50-10, 0,9 in ccordnce with N- N-EN ISO pcs/kit must e ordered seprtely. ightening torque for olts Md = 15 Nm EXMLES OF LICION IN HYDRULIC SYSEM Directionl spool vlve - hnd lever operted type MM10 4MM10 J-1 M Directionl spool vlve - hydruliclly operted type H10 3URED4 3URED4 4H10 J-1 M ONR dowice S.. ul. ojsk olskiego dowice tel fx ype MM10/MD10/MR10/H10
Directional spool valve types WMM10 hand lever operated WMD10 rotary knob operated WMR10 roller operated WH10 hydraulically operated NS10
Directionl spool vlve types MM10 hnd lever operted MD10 rotry kno operted MR10 roller operted H10 hydruliclly operted NS10 31,5 M 10 dm 3/min K 40 180 04.009 LICION Directionl spool vlves re intended for
More informationDirectional spool valve types WMM6 hand lever operated WMD6 rotary knob operated WMR6 roller operated WH6 hydraulically operated NS6 31,5 MPa 80
Directionl spool vlve types MM6 hnd lever operted MD6 rotry kno operted MR6 roller operted H6 hydruliclly operted NS6 31,5 M 80 dm 3/min K 420 170 08.2008 LICION Directionl spool vlves re intended for
More informationDirectional spool valves hand lever operated type WMM6
Directionl spool vlves hnd lever operted type MM6 rotry kno operted type MD6 roller operted type MR6 hydruliclly operted type H6 NS6 up to 31,5 M up to80 3 dm /min K 421 180 01.2013 LICION Directionl spool
More informationWK Directional spool valve types WMM10 hand lever operated WMD10 rotary knob operated WMR10 roller operated WH10 hydraulically operated 3
Directionl spool vlve types MM hnd lever operted MD rotry kno operted MR roller operted H hydruliclly operted dm 3 NS up to35 M up to160 /min D SHEE - OER RION MNU NUL K 430 700 04.2017 LICION Directionl
More informationDirectional spool valves type UREP10 electrohydraulically
Directionl spool vlve type URE0 electro-hydruliclly operted NS0 up to 3,5 M up to 50 D SHEE - SERVICE MNU NUL dm 3 /min WK 42 60 05.202 LICION Directionl spool vlves type URE0 electrohydruliclly operted
More information6/2 way directional valve. Type 6/2UREM10-1 -
6/2 wy directionl vlve type 6/2UREM0 NS 0 dm up to 5 MP up to 80 /min DT SHEET - SERVICE MNU NUL WK 42 590.202 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM0... re intended for hydrulic
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS6 dm 3 up to 35 MP up to 50 /min DT SHEET - OPERTION MNUL WK 421 540 03.2016 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More information4/3, 4/2 and 3/2 directional valve. with mechanical, manual operation. Type WMR(U)10...L3X. Contents. Features 01/06 2.7
01/0 4/3, 4/2 nd 3/2 directionl vlve with mechnicl, mnul opertion 2.7 Type WMR(U)10...L3X Size 10 Up to 315r Up to 120L/min Contents Function Specifiction Symols 03 Technicl dt 03 Operting limittion 04
More information4/3, 4/2 and 3/2 directional valve with wet-pin AC or DC solenoid
01/0 /3, / nd 3/ directionl vlve with wet-pin AC or DC solenoid Type WE...L7X.11 Size (NG) Up to 315 br Up to 0 L/min Contents Function nd configurtions Specifictions Symbols 03 Technicl dt 03 Electric
More informationPilot Operated Pressure Relief Valves with 2 or 3 Pressure Ratings Type DB 3U, Series 5X
ilot Operted ressure Relief Vlves with or ressure Rtings ype D U, Series RE 6/.9 RE 6/.9 Sizes,, Up to r Up to 6 L/min Replces: Specil fetures: Suplte mounting Mounting to DIN form E, Connection pltes
More informationProportional spool valve NG4 ISO
Q mx = l/min 3 volume flow levels Q N mx = l/min p mx = 3 r NG ISO 1- DESCRIION Direct operted proportionl spool vlve with connections in -chmer system. recise spool fit, low lekge, long service life time.
More information4/3, 4/2 and 3/2 directional valve with fluidic actuation
4/3, 4/2 nd 3/2 directionl vlve with fluidic ctution RE 22282/04.10 Replces: 08.08 1/12 ype W, WH Size 6 Component series 6X (W), 5X (WH) Mximum operting pressure 315 r [4569 psi] Mximum flow 60 l/min
More informationSoft switching 4/2 and 4/3 directional valves with DC solenoids Model WE /A12..
R 3 183/06.98 Replces: R 3 18/05.9 R 3 183/06.98 Soft switching / nd /3 directionl vlves with DC solenoids Model WE...73 -.. /1.. Nominl sizes 6 nd 10 Series 6X (size 6)/3X (size 10) Mximum operting pressure
More informationProportional spool valve. NG4-Mini Wandfluh standard
roportionl spool vlve roportionl spool vlve Flnge construction Q mx = l/min 3 volume flow levels Q N mx = 1 l/min p mx = 3 r NG-Mini Wndfluh stndrd DESCRIION Direct operted proportionl spool vlve with
More informationSmoothly switching 4/2 and 4/3 directional valve with DC solenoids
Smoothly switching /2 nd /3 directionl vlve with DC solenoids RE 23183/0.05 Replces: 02.03 1/12 ype WE 73 12 Size nd 10 Component series X; 3X Mximum operting pressure 350/315 r Mximum flow 0/100 L/min
More information4/2- and 4/3- Way Safety/Isolation Valve Model Z4 WEH 10 (Series 4X)
Function s n emergency on off isoltion vlve or on off isoltion/ypss vlve, primrly pplied with servo/proportionl systems Free flow through ports P nd T in ll pilot vlve positions Pilot operted y D 03, spool
More informationRA / /3-, 4/2- and 3/2-Way Directional Valves Mechanical/Model WM.6 (Series 5X) Mechanical Manual Operation 1/
/3-, /- nd 3/-Wy Directionl Vlves Mechnicl/Model WM.6 (Series X) Mechnicl Mnul Oertion Size 6 (D 3).. 6 SI (3 r)... 6. GM (6 L/min) RA 8/6.98 RA 8/6.98 Relces: 6.97 Direct oerted sool tye directionl control
More informationDirectional spool valves, directly operated, with manual and fluid logics actuation. Type WMM, WN and WP. Features. Contents
Directionl spool vlves, directly operted, with mnul nd fluid logics ctution ype WMM, WN nd W RE 22334 Edition: 2013-04 Replces: 22331 Size 10 Component series 5X Mximum operting pressure 350 r [5076 psi]
More informationType WMR, WMRZ, WMU, WMM and WMD(A)
Directionl spool vlves, direct operted, with mechnicl or mnul ctution ype WMR, WMRZ, WMU, WMM nd WMD() RE 80 Edition: 013-06 Replces: 04.10 Size 6 Component series 5X; 6X Mximum operting pressure 315 [4569
More informationType WMR, WMRZ, WMU, WMM and WMD(A)
Courtesy of CM/Flodyne/Hydrdyne Motion Control Hydrulic neumtic Electricl Mechnicl (800) 46-5480 www.cmfh.com Directionl spool vlves, direct operted, with mechnicl or mnul ctution ype WMR, WMRZ, WMU, WMM
More information4/3-, 4/2- and 3/2-way directional valves with wet pin DC or AC solenoids, Type.WE 10../.C
RE 2 27/05.98 Replces: 2 1 /-, /2- nd /2-wy directionl vlves with wet pin DC or AC solenoids, Type.WE 10../.C Nominl size 10 Series X (individul connections) Series X (centrl connections) Mximum operting
More informationDirectional spool valves type WE10. electrically operated
Diretionl spool vlve type WE eletrilly operted NS up to, M up to D SHEE - SERVICE MNU NUL dm /min WK 99 9. LICION Diretionl spool vlves type WE eletrilly operted re intended for hnge in diretion of fluid
More information4/3-, 4/2- and 3/2-way directional valves with wet pin DC solenoids Type WE 6../.S
RE 2 /2.02 Replces: 07.02 /-, /2- nd /2-wy directionl vlves with wet pin DC solenoids Type WE../.S Nominl size Series X Mximum operting pressure 5 r Mximum flow 0 L/min H59/98 Type WE EX/SG2N9K/V with
More informationSize 10 to 52 up to 350 bar up to 2800 L/min
RE 9 /9.95 /-nd 5/-Wy-roportionl-Directionl Vlves ilot operted type.wrz, externl pilot opertion type.wrh Sizes, 5,, 5 Series 5; Size 6 Series 6 Size to 5 up to 5 r up to L/min RE 9 /9.95 Replces: 7.9 Chrcteristics:
More information4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids
4/3, 4/2 nd 3/2 directionl vlve with wet-pin DC solenoids RE 23178-00/06.09 Replces: 02.03 1/12 ype WE SO407 Size 6 Component series 6X Mximum operting pressure 315 r [4569 psi] Mximum flow 60 l/min [15.8
More information1) Actual pressure drop required for each metering land, up to the specified maximum flow rate is: Q ΔP actual. ) 2 PSI; (Q in GPM) actual Q rated
tlog HY14-255/US echnicl Informtion Generl escription proportionl directionl control vlves re high performnce, two stge pilot operted solenoid vlves with electronic spool position feedck, nd on-ord integrted
More informationPressure relief valve, pilot operated, Type DB(W) W65
Industril Hydrulics Electric Drives nd Controls Liner Motion nd ssemly echnologies neumtics Service utomtion Moile Hydrulics RE 2 1/0.0 Replces: 0.0 ressure relief vlve, pilot operted, ype D(W) W6 Nominl
More informationSeries Shockless Type Solenoid Operated / Solenoid Controlled Pilot Operated Directional Valves
DIRCIL CROLS Series Shockless ype Solenoid Operted / Solenoid Controlled ilot Operted Directionl Vlves he G-Series incorporte electronic circuits o enle djustment of the spool shifting time. specil spool
More information4/2- and 4/3-way directional valves pilot operated, Type 4WEH externally pilot operated, Type 4 WH
RE 75/0.03 Replces: 0.0 /- nd /3-wy directionl vlves pilot operted, ype WEH externlly pilot operted, ype WH Nominl sizes 0 to 3 Series ; ; 7 Mximum operting pressure 350 r Mximum flow 00 L/min ype WEH
More information1/8 Solenoid Operated Directional Valves, DSG-01 Series. Max. Operating Pressure Kgf/cm {Spool Type 60 Only 250}
/8 Solenoid Operted Directionl Vlves, DSG- Series WID RNG OF MODLSChoose the optimum vlve to meet needs from lrge selection ville. DIRCIONL CONROLS IC--- he DSG- series solenoid operted directionl vlve
More information4/3, 4/2 and 3/2 directional valve with wet-pin AC or DC solenoid
/, /2 nd /2 directionl vlve with wet-pin C or DC solenoid RE 2178/12.05 Replces: 0.05 1/16 ype WE 6 E Size 6 Component series 6X Mximum operting pressure 50 r [5100 psi] Mximum flow: 80 l/min [21 gpm]
More informationSolenoid Operated Relief Valve
Solenoid Operted Relief lve JIS grphic symbols for hydrulic system Refer to the next pge. Fetures Low-noise models with further improvement on noise chrcteristics nbles circuit unloding nd dul/triple pressure
More informationEXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X DIRECTIVE ATEX ET IECEx
EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X DIRECTIVE ATEX ET IECEx CARACTERISTICS Hydrulic : Cetop. Mximum pressure in service : 0 Br. Nominl flow. : l/mn. 7 hydrulic symols.. Electric
More information4/3 directional high-response control valves, direct operated, with integrated control electronics (OBE)
Courtesy of CM/Flodyne/Hydrdyne Motion Control Hydrulic neumtic Electricl Mechnicl (8) 426-548 www.cmfh.com 4/3 directionl high-response control vlves, direct operted, with integrted control electronics
More information4/3 directional high-response control valves, direct operated, with integrated control electronics (OBE)
4/3 directionl high-response control vlves, direct operted, with integrted control electronics (OE) RE 2967/11.5 Replces: 2.3 1/14 ype 4WRSE Sizes 6 nd 1 Series 3X Mximum operting pressure 315 r Mximum
More information4/2- and 4/3-way proportional directional valves, direct operated, without electrical position feedback Models 4WRA and 4WRAE, Series 2X
/- nd /-wy proptionl directionl vlves, direct operted, without electricl position feedbck Models WR nd WRE, Series X Size 0 )... 00 PSI ( br)....0 GPM (0 L/min) R 9 08/0.98 R 9 08/0.98 Replces: 0.9 Chrcteristics:
More informationPressure relief valve, pilot operated, sandwich plate type UZPR6
ressure relief valve, pilt perated, sandwich plate type UZR6 NS6 up t 1,5 Ma up t 60 dm /min WK 494 060 0.2010 LICION he pressure relief valve, pilt perated, sandwich plate design type UZR 6 is used t
More informationPressure reducing valve, pilot operated, sandwich plate type UZRR6
h ev a lve c n sis ts fp il t va lve a nd m a in v alv e. h e re du ce d p res su re a ct s n th e l we r fa ce f m a in sp l (1), a nd t hr u gh n z zl e( ) als n th e up p er fa ce an d th r ug h n z
More information4/3-, 4/2- and 3/2-way directional valves with switching time adjustment, Type 5-.WE 10 (5-chamber version)
RE 3 31/0.03 Replces: 03.0 /3-, /- nd 3/-wy directionl vlves with switching time djustment, Type -.WE 10 (-chmer version) Nominl size 10 Series 3X Mximum operting pressure 31 r Mximum flow 10 L/min HA
More information4/2, 4/3 and 5/2, 5/3 proportional directional valves, pilot operated, without electrical position feedback Types.WRZ,.WRZE und.
RE 9 /. Replces:. /, / nd /, / proportionl directionl vlves, pilot operted, without electricl position feedck ypes.wrz,.wrze und.wrh Nominl sizes, 6,,, Series 7 Mximum operting pressure r Mximum flow 8
More informationMax. Operating Pressure. Min. *2 Required Pilot Pres. Max. Pilot
DIRCIONL CONROLS Solenoid Controlled ilot Operted Directionl Vlves hese vlves re composed of solenoid operted pilot vlves nd pilot operted slve vlve. When solenoid is energised the pilot vlve directs the
More information3/2, 4/2 and 4/3 directional valves, internally pilot operated, externally pilot operated
3/2, /2 nd /3 directionl vlves, internlly pilot operted, externlly pilot operted RE 275/08.08 Replces: 02.03 /38 ypes WEH nd WH Sizes 0 to 32 Component series ; ; 7 Mximum operting pressure 350 r [507
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE. Contents. Features
Directionl spool vlves, direct operted, with solenoid ctution Type WE H5958 Fetures 4/3, 4/2 or 3/2 directionl design High-power solenoid orting pttern ccording to ISO 4401-05-04-0-05 nd NF T3.5.1 R2-2002
More information4/3 and 4/2 Proportional directional valve elements with flow sharing control (LUDV concept)
R 181-9/1.1 Replces: 1.11 1/1 / nd / Proportionl directionl vlve elements with flow shring control (LUDV concept) L88... (EDC-P) PTENT PENDING Summry Description Pge Generl specifictions 1 Ordering detils
More information4/2 and 4/3 proportional directional valves direct operated, with electrical position feedback, without/with integrated electronics (OBE)
4/2 nd 4/3 proptionl directionl vlves direct operted, with electricl position feedck, without/with integrted electronics (OE) Types 4WRE nd 4WREE Nominl sizes 6 nd 0 Component series 2X Mximum operting
More informationProportional spool valve with integrated electronics and spool position control with LVDT NG6 ISO
Proportionl spool vlve with integrted electronics nd spool position control with LVDT Flnge construction direct operted Q mx = l/min Q N mx = 4 l/min p mx = 3 r NG6 ISO 441-3 DESCRIPTION Direct operted
More informationDirectional spool valves, direct operated, with solenoid actuation. Type WE. Features. Contents. RE Edition:
Directionl spool vlves, direct operted, with solenoid ctution ype WE RE 23208 Edition: 2016-05 Solenoid coil is n pproved component with UR-mrking ccording to UL 906 Size 6 Component series 6X Mximum operting
More information2-way cartridge valves-pressure functions Cartridge valves type LC... Control covers type LFA...
2-wy crtridge vlves-pressure functions Crtridge vlves type LC... Control covers type LF... Nominl size 6 to Series 6; 7 Mximum operting pressure 2 br Mximum flow 7 L/min H//D 93 Crtridge vlve type LC 2
More informationEXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X ATEX DIRECTIVE / IECEx / KOSHA
EXLOSION ROOF DIRECIONL CONROL VLVE YE ED SERIE X EX DIRECIVE / IECEx / KOSH CRCERISICS Hydrulic : Cetop. Mximum pressure in service : r. Nominl Flow mx. : 0 l/mn.(voir tleu) Directionl control vlves re
More information4/2 and 4/3 directional valves, internally pilot operated, externally pilot operated
1/ / nd /3 directionl vlves, internlly pilot operted, externlly pilot operted RE 751-D-/0.1 Replces: 01.10 ype H-WEH D... Sizes 10, 1, 5, 3 Component series,, 7 Mximum operting pressure 350 r Mximum flow
More information4/2 and 4/3 directional valves, internally pilot-operated, externally pilot-operated
1/ / nd /3 directionl vlves, internlly pilot-operted, externlly pilot-operted RE 751-E/0.1 Replces: 09.13 ype H-WEH E Sizes 10, 1, 5, 3 Component series,, 7 Mximum operting pressure 350 r Mximum flow 1100
More informationUL 429 1/32. RA /09.10 Replaces: Directional Control Valves. Rexroth Directional Control Valves Meet UL 429 Recognized Standards
Courtesy of CM/Flodyne/Hydrdyne Motion Control Hydrulic neumtic Electricl Mechnicl (8) -58 www.cmfh.com UL 9 R 8 31/9.1 Replces:.3 Directionl Control Vlves Rexroth Directionl Control Vlves Meet UL 9 Recognized
More information4/2 and 4/3 directional valves, pilot operated
1/6 4/ nd 4/3 directionl vlves, pilot operted RE 4751-E-/01.10 Replces: 04.07 ype H-4WEH E Sizes 10, 16, 5, 3 Component series 4, 6, 7 Mximum operting pressure Size 10 315 r Size 16, 5, 3 350 r Mximum
More information4/2 and 4/3 proportional directional valves, directly controlled, with electrical position feedback Models 4WRE and 4WREE
RA 9 6/6.98 RA 9 6/6.98 Replces:.97 / nd / proptionl directionl vlves, directly controlled, with electricl position feedck Models WRE nd WREE H/A/D 88/97 Nominl sizes 6 nd Series X Mximum operting pressure
More informationDIRECTIONAL CONTROLS
DIRCIONL CONROL olenoid Operted...ge 331 olenoid Controlled ilot Operted...ge 331 eries hockless ype...ge 331 ilot/mnully/mechniclly Operted...ge 331 oppet ype...ge 451 Check/ilot Controlled Check Vlves...ge
More informationSafety relay OA 5601, OA 5602, OA 5603
Sfety rely OA 0, OA 0, OA 0 cc. to DIN EN 0 0, DIN EN 0-, DIN EN 0 - with positively driven contcts Clernce nd creepge distnces, contct-coil mm high voltge resistnce kv high switching relibility due to
More information3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators
lectric, Hydrulic, nd Pneumtic ctutors TL 1. Select Vlve ody including P ode (Vlve Size, v Rting, Port ode) or select Vlve ssemly correct (refer to Tle 3 nd Tle 3 lso) less ctutor ode (XXX) including the
More informationSeries-Hybrid Components
-Hyrid Components roportionl Electro-Hydrulic Controls ypes rphic Symols x. perting ressure (SI) ximum Flow U.S..5 3 5 0 30 0 00 3 5 0 30 0 00 300 0 00 L/min ge ilot Relief s (35) EHD 0 658 ressure Control
More informationPROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS
H RRINL ELECR-HDRULIC CNRLS -Hyrid Components...ge 656 roportionl Electro-Hydrulic Control s...ge 667 roportionl Electro-Hydrulic Controls 655 High-ccurcy, simple, convenient relizes your drems. Why simple?
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationExplosion-proof solenoid valves on/off and proportional controls - C UL US certification
www.tos.com Tble E5-/E Explosion-proof solenoid vlves on/off nd proportionl controls - DLHZ/UL-T- vlve body ex-proof solenoid ex-proof trnsducer (only for proportionl -T vlves) threded connections for
More informationMN4TB1/2 Series. Applicable cylinder bore size: ø20 to ø80
M port vlve DIN ril mount MN/ Series pplicle cylinder ore size: ø0 to ø0 MN W *0E JIS symol port vlve -position single solenoid -position doule solenoid -position ll ports closed -position //R connection
More informationAxial piston variable double pump A22VG series 40
Axil piston vrile doule pump A22VG series 40 E 93221 Edition: 05.2014 eplces: 06.2012 Size 45 Nominl pressure 380 r Mximum pressure 420 r Closed circuit Fetures Vrile doule pump with two xil piston rotry
More informationExplosion-proof solenoid valves on/off and proportional controls - CULUS certification
www.tos.com Tble E5-3/E Explosion-proof solenoid vlves on/off nd proportionl controls - CULUS certifiction DLHZ/UL-T- vlve body ex-proof solenoid ex-proof trnsducer (only for proportionl -T vlves) threded
More informationSOLENOID OPERATED DIRECTIONAL VALVES -DSG / /8, Sub-plate Mounting
SOLNOID ORD DIRCIONL VLVS -DSG-0- - -/90 /8, Su-plte Mounting Up to. M (470 SI), L /m in ( U.S.GM) Mounting Surfce : ISO 4--0-4-, CO-, NF-D0 u. C-0 DIRCIONL CONROLS erminl ox ype lug-in Connector ype Fetures
More informationKINEMATICS OF RIGID BODIES
KINEMTICS OF RIGID ODIES Introduction In rigid body kinemtics, e use the reltionships governing the displcement, velocity nd ccelertion, but must lso ccount for the rottionl motion of the body. Description
More information1/8 Solenoid Operated Directional Valves, DSG-01 Series
/8 Solenoid Operted Directionl Vlves, DSG-0 Series hese re Solenoid Operted Directionl Vlves of high pressure, high flow nd low pressure drop, the fetures of which cn e mterilized y employing powerful
More informationDESCRIPTION FUNCTION APPLICATION
Solenoids Solenoid coil MKY45/18x6 For explosion-hzrd zones Protection clss IP65/67 Ex d IIC T6 / T4 G Ex t IIIC IP65 T8 C/T13 C D Ex d I M II 2 G Ex d IIC T6/T4 II 2 D Ex td A21 IP65 T8 C/T13 C I M2 Ex
More information4KB1/2/3/4 Series. Applicable cylinder bore size: 20 to 160mm. Pilot operated soft spool valve. Compressed air
Discrete vlve Su se porting, port pilot operted vlve K1/2// Series pplicle cylinder ore size: 20 to 0mm CD DT VILLE. JIS symol port vlve 2position single port vlve 2position doule port vlve position ll
More informationDNM, DNP. Single-Stage End-Suction Pumps
DNM, DNP ingle-tge End-uction Pums A wide rnge of comct nd directly couled end-suction ums designed for circultion of cold nd hot liquids in oen nd closed systems. TM 9 99 Contents Generl dt Performnce
More informationDirect operated pressure relief valve type DBD
Direct perated pressure relief type DBD NS,, up t Ma up t 50 dm /min WK 50 0. ALICAION ressure relief s are designed t limit maximum pressure in the entire hydraulic system r in its part. Depending n the
More informationFlow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min
RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division
More informationSS Series(Wiring System: Central Terminal Box) Wet Type Solenoid Valve
W Y SD RD DR R VV SS Series(Wiring System: entrl erminl ox) Wet ype Solenoid Vlve 0 to 160l/min 35 etures qvery long life he movle iron core of the wet type solenoid is immersed in oil, which keeps it
More informationTHE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.
P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE
More informationK 080/12 F 10 K 3-2X/.. Features
RE 2 1/11.02 Replaces: 0.2 Fine throttle Type F Nominal sizes and Series 2X and 3X Maximum operating pressure 2 bar Maximum flow 0 L/min K 00/12 F K 3-2X/.. K 0/ F P 3-3X/.. Overview of contents Contents
More informationLINKÖPINGS TEKNISKA HÖGSKOLA. Fluid and Mechanical Engineering Systems
(6) Fluid nd Mechnicl Engineering Sytem 008086. ) Cvittion in orifice In hydrulic ytem cvittion occur downtrem orifice with high preure drop. For n orifice with contnt inlet preure of p = 00 br cvittion
More informationWK Proportional intrinsically safe pressure relief valves type IWZP(P, S, G)E10 and pilot valve type IWZEP6 NUAL APPLICATION
ALICAION roportional intrinsically safe pressure relief valves type IWZ(, S, G)E0 and pilot valve type IWZE NS0 up to 0 Ma up to 00 DAA SHEE - OERA RAION MANUA NUAL Intrinsically safe, proportional, pressure-relief
More information50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m
F Standardised EN 733 centrifugal pumps Hz n= 9 rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to (3 ) Head up to 9 m PPLICTION LIMITS Manometric suction lift up to 7 m Liquid temperature
More informationInstallation and connecting possibilities 184XL. Electrical position monitoring. Monitoring of the clamping arm in clamping position (adjustable)
wing Clmps with turdy wing Mechnism ottom flnge type, with optionl position monitoring, doule cting, mx. operting pressure 35 r Issue -5.5 ppliction Hydrulic swing clmps re used for clmping of workpieces,
More information38.2. The Uniform Distribution. Introduction. Prerequisites. Learning Outcomes
The Uniform Distribution 8. Introduction This Section introduces the simplest type of continuous probbility distribution which fetures continuous rndom vrible X with probbility density function f(x) which
More informationExplosion-proof solenoid valves on/off and proportional controls - ATEX or Rostechnadzor Russian certification
www.tos.com Tble E120-23/E Explosion-proof solenoid vlves on/off nd proportionl controls - TEX or Rostechndzor Russin certifiction DLHZ-T-040 vlve body ex-proof solenoid ex-proof trnsducer (only for proportionl
More information[ ( ) ( )] Section 6.1 Area of Regions between two Curves. Goals: 1. To find the area between two curves
Gols: 1. To find the re etween two curves Section 6.1 Are of Regions etween two Curves I. Are of Region Between Two Curves A. Grphicl Represention = _ B. Integrl Represention [ ( ) ( )] f x g x dx = C.
More informationSOLENOID OPERATED DIRECTIONAL VALVES -DSG / /8, Sub-plate Mounting
SOLNOID ORD DIRCIONL VLVS DSG0 /90 /8, Suplte Mounting Up to. M (470 SI), L /min ( U.S.GM) Mounting Surfce : ISO 404, CO, NFD0 u. C0 DIRCIONL CONROLS erminl ox ype lugin Connector ype Fetures hese re Solenoid
More informationExplosion-proof solenoid valves on/off and proportional controls - ATEX or Rostechnadzor Russian certification
www.tos.com Tble E120-23/E Explosion-proof solenoid vlves on/off nd proportionl controls - TEX or Rostechndzor Russin certifiction DLHZ-T-040 vlve body ex-proof solenoid ex-proof trnsducer (only for proportionl
More informationSTPSC16H065A. 650 V power Schottky silicon carbide rectifier. Datasheet. Features. Applications. Description
Dtsheet 65 V power Schottky silicon crbide rectifier NC A TO-247 K A K NC Fetures No or negligible reverse recovery Temperture independent switching behvior High forwrd surge cpbility Operting T j from
More informationManually Operated Directional Valves DMT- 03 / 06 / 10 DMG-01 / 03 / 04 / 06 / 10 Thread Connection / Sub-plate Mounting.
Manually Operated Directional s DM- / / DMG- / / / / hread Connection / Mounting Specifications hreaded Connections Numbers DM--C - DM--D - DM--D - DM--B - DM- -C - DM- -D - DM- -D - ( ) (.) (.) (.) (.)
More informationSection 6: Area, Volume, and Average Value
Chpter The Integrl Applied Clculus Section 6: Are, Volume, nd Averge Vlue Are We hve lredy used integrls to find the re etween the grph of function nd the horizontl xis. Integrls cn lso e used to find
More informationJoule-Thomson effect TEP
Joule-homson effect EP elted oics el gs; intrinsic energy; Gy-Lussc theory; throttling; n der Wls eqution; n der Wls force; inverse Joule- homson effect; inversion temerture. Princile A strem of gs is
More information03 Qudrtic Functions Completing the squre: Generl Form f ( x) x + x + c f ( x) ( x + p) + q where,, nd c re constnts nd 0. (i) (ii) (iii) (iv) *Note t
A-PDF Wtermrk DEMO: Purchse from www.a-pdf.com to remove the wtermrk Add Mths Formule List: Form 4 (Updte 8/9/08) 0 Functions Asolute Vlue Function Inverse Function If f ( x ), if f ( x ) 0 f ( x) y f
More informationMADILL MBT GRAPPLE RETURN TO INDEX
MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions
More informationTHERMAL EXPANSION COEFFICIENT OF WATER FOR VOLUMETRIC CALIBRATION
XX IMEKO World Congress Metrology for Green Growth September 9,, Busn, Republic of Kore THERMAL EXPANSION COEFFICIENT OF WATER FOR OLUMETRIC CALIBRATION Nieves Medin Hed of Mss Division, CEM, Spin, mnmedin@mityc.es
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationHDF series - PARALLEL GRIPPER
Operation specification and Ordering expression Internal structure DS Angular DM 0 Angular Specification ore size Type of operation Fluid Pressure range Range of service temperature kgf/cm (kpa) Max. operation
More informationCSSTP. Given CSSTP. Statements Reasons. Given CSSTP. Mult. Prop. = Div. Prop. = Sym. Prop. = or 1 Mult. Prop. = Div. Prop. =
: If the triangles are similar (~), then all of the sides must be congruent proportional (create equal scale fractions). Example: A~ F Before you start your proof, it is important to plan! Setup the three
More informationFig. 1. Open-Loop and Closed-Loop Systems with Plant Variations
ME 3600 Control ystems Chrcteristics of Open-Loop nd Closed-Loop ystems Importnt Control ystem Chrcteristics o ensitivity of system response to prmetric vritions cn be reduced o rnsient nd stedy-stte responses
More informationApplications of Bernoulli s theorem. Lecture - 7
Applictions of Bernoulli s theorem Lecture - 7 Prcticl Applictions of Bernoulli s Theorem The Bernoulli eqution cn be pplied to gret mny situtions not just the pipe flow we hve been considering up to now.
More informationStudent Activity 3: Single Factor ANOVA
MATH 40 Student Activity 3: Single Fctor ANOVA Some Bsic Concepts In designed experiment, two or more tretments, or combintions of tretments, is pplied to experimentl units The number of tretments, whether
More informationDirectional spool valve type SWPN Nom. size 6 or 10 conforming DIN
Directional spool valve type SWPN Nom. size 6 or 10 conformg DIN 24 340 Max. pressure Max. flow = 350 bar = 150 lpm 1. General The valves illustrated here are directly actuated directional spool valves
More informationSection 14.3 Arc Length and Curvature
Section 4.3 Arc Length nd Curvture Clculus on Curves in Spce In this section, we ly the foundtions for describing the movement of n object in spce.. Vector Function Bsics In Clc, formul for rc length in
More informationExplosion-proof solenoid valves on/off and proportional controls - CULUS certification obsolete components - availability on request
Tble E5obs/E Explosion-proof solenoid vlves on/off nd proportionl controls - ULUS certifiction obsolete components - vilbility on request LHZ/UL-T-4 vlve body ex-proof solenoid ex-proof trnsducer (only
More information