MS AND 97B - SERIES ACR

Transcription

1 9 I 060

2

3 Introduction mphenol and 9 series are two series of thread & ayonetcoupled connectors designed to meet the operating requirements of I0. vailable in a variety of styles and classes, these connectors are primarily used in a range of military and industrial applications where specific degrees of environmental protection are required. lthough series have identical insert arrangements and other similar component parts, the two series differ in that mphenol series of connectors are also qualified to meet the operating requirements of efence tandard oint ervices pecification 0, issued by the lectronics omponents tandardization Organisation (O). mphenol 9 connectors feature a quick mating bayonet coupling with an audible full mating feature. This series uses the same I0 insert patterns and are used in high shock and vibration environments encountered in commercial, geophysical, aerospace, ground support and shipboard applications. age ontents Introduction onnector styles eneral description lectrical data Insert orientations s hell types ack accessories Other accessories /9 eries Ordering /9 series connectors O

4 onnector tyles lass 0 0 lass = lass lass and 0 0 lass cable clamp back shell grommet sleeve grommet 0 0 O

5 onnector tyles 9 lass lass = lass lass lass cable clamp back shell grommet sleeve grommet O

6 eneral escription These electrical connectors are designated because the interchangeability and operating characteristics are determined by U.. ilitary pecifications. These specifications are revised from time to time to incorporate performance requirements dictated by design advances and more stringent requirements of allied equipment. The several designations of and 9 connectors meet different requirements of I 0. These designations and general descriptions are as follows : hell hell constructions include solid back shell () and environmental resistant (, & ). nvironmental resistant connectors provide a moisture barrier and assure a positive seal. hell styles consist of wall type receptacles (00), cable receptacles (0), box receptacles (0), straight plugs (06) and angle plugs (0). hell hardware is manufactured from aluminium alloy and cadmium plated with olive drab chromate finish. This finish has excellent conductivity; it is nonreflecting and corrosion resistant. lack anodised finish and cadmiumfree zinc plating with olive drab chromate finish are also available. or details, contact factory. ontacts in and socket contacts are of brass and generally silver plated. old plating is also available. or details contact factory. These contacts are available for solder or crimp termination. pecial arrangements of contacts for premating and preearth are also available. Inserts and grommet ynthetic inserts and grommet manufactured according to I06, offer high dielectric strength and are resistant to oils, gasoline and low temperature. is dimensionally stable, has high arc resistance and high insulation resistance under both humidity and thermal stress. eneral description lugs are available in, and types. eceptacles are available in,, and types. olid back shell Intended for general service usage to provide convenient means of connecting and disconnecting electrical circuits in industrial and military applications. nvironmental resisting Intended for use where the connector will be subject to heavy condensation and rapid changes in temperature or pressure and/or where the connector is subjected to high vibratory conditions. nvironmental resisting with grommet seal and strain relief backshell except for 0 type. nvironmental resisting with grommet seal, strain relief backshell and front gasket seal for plug type. nvironmental resisting with grommet seal, shorter and lightweight. Quick positive coupling eatures for 9 reverse bayonet coupling connectors with il0 insert patterns: udible and tactile indication of full coupling Waterproof o lockwiring required igh shock and vibration capabilities Insert available in eoprene material (alternate inserts materials available upon request) Operating temperature range with eoprene 0 0 inserts: to + vailable in both crimp and solder terminations ontacts available in gold and silver plating umerous finishes available Zinc alloy plating (cadmium free) available ugged construction; aluminum or stainless steel components Intermateable with existing 9 connectors 00 couplings minimum O

7 lectrical ata ielectric strength Inst. Test oltage ac rms ontact rating ontact ated urrent ontact esistance miliohms Operating oltage at ea evel Operating oltage at ea evel Inst O

8 Insert Orientations To avoid crossplugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. s shown in the daigram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counterclockwise the same number of degrees with respect to the normal shell key. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z which are as below : egree W X Y Z osition W osition Y osition X osition Z iews looking into front face of pin insert or rear of socket insert Insert rrangement W egrees X Y Z Insert rrangement W egrees X Y Z Insert egrees rrangement W X Y Z O 6

9 Insert rrangements Insert ervice Total rrangement ating ontacts ontact 0 Inst 6 Inst Inst Inst /Inst Inst Inst /Inst / Insert ervice Total ontact rrangemenacts 0 6 ating ont 0 Inst / Inst Inst Inst / / / / / / / / / 6 Insert ervice Total ontact rrangemenacts 0 6 ating ont / 0 6 Inst / / 9 // / // ///Inst 9 // / 9 / 6 6 IT, / / / O

10 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 ontact size 0 6 ront of socket insert 0 6 ront of socket insert ontact size 6 6 Inst. 6 6 Inst. 6 6 Inst. 6 6 ontact size rotation of *0 Inst rotation of * 6 * 6 6 ontact size * *6 *ot tooled up, can be tooled up on request. ontact actory. O

11 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 ontact size *6 I ontact size,,,=;al.=inst * ontact size 6 9 Inst or * ontact size * 6 6 *ot tooled up, can be tooled up on request. ontact actory. 00 o rotation of 9 * Inst O 9

12 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 I ontact size 6 0 o rotation of *,,,=;al.=inst. 0 6 *9 6 0 rotation of 0 * rotation of 0 * ontact size 0 or *06 6 0,,,=;,,,= 6 0 Inst =;al.= I ontact size 0 Inst. 6 * or or I I ontact size * *ot tooled up, can be tooled up on request. ontact actory. O 0

13 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 I T ontact size 0 6 0_ 00 rotation of 0 *0 Inst o 0 rotation of 0 *00 Inst. 6 U T ontact size * ontact size 6 *6 6 0 * 9 U T Y ontact size =;,,,= *ot tooled up, can be tooled up on request. ontact actory. O

14 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 ontact size =;,,,,= * =;al.= 6,,,,=;,,= ontact size * 0 6 or =;al.= or,,=;,,= 6 =;al.= 6 ontact size * 6 * ,,=;al.= *ot tooled up, can be tooled up on request. ontact actory. O

15 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 I O I 06 ontact size or or 6 ontact size *6,,,=;,,= 6 * Q T U X Z W Y ontact size * 6 Inst. 6,,=;al.= 6 * 6 *ot tooled up, can be tooled up on request. ontact actory. O

16 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 ontact size *,,=;al.= 6 * 6 6 ontact size,=;=;al.= U W X T I a Z Y X T b U d W a Z Y X T b U d W o 00 rotation of ontact size 0 =;al.= * 6 6 *ot tooled up, can be tooled up on request. ontact actory. O

17 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 T U W X Y Z a b c d e f g h j k l m T U Q ontact size * =;,,=; to = 6 =;,,,,=;,=al.=inst. 6 T U W X Y Z a b c d e f g h j k l m n p ontact size 9,=;,=;al.= ontact size =;,,,= 0 * *ot tooled up, can be tooled up on request. ontact actory. O

18 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 I W O X U W T Z Y X c h d e j k f g W X Y Z a T U I b O ontact size IT, 6 c d e Y Z a b T U O W X I O T U Y W X Y Z a b c d e f g h i j k l m n r o v w x y z ontact size I 6 O T U W ontact size * *ot tooled up, can be tooled up on request. ontact actory. O 6

19 Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 ontact size 6 =;,= h I O T U W X a Y Z b c d e f g l j k n p u w v r s y y z m I O T Y U W X Z a b c d e f g m n k p r s v x u y h w z t j e d f Z a Y b c U W X T O I ontact size *6 0 6 x or y *6 6 6 Y *69 6 O Q T U O Q T U O Q T U W X Y Z a b c W X Y Z a b c W X Y Z a b c d e f g h j k d e f g h j k d e f g h j k l m n p r s l m n p r s l m n p r s t u v w x t u v w x t u v w x y z y z y z ontact size 60 6 o 00 rotation of 60 *6 6 o 0 rotation of 60 *6 6 *ot tooled up, can be tooled up on request. ontact actory. O

20 i Insert rrangements ront face of pin insert or rear of socket insert illustrated OTT 6 0 Q I Q Q d T c k U e j m b f h a W g Z X Y ontact size *6,,Q=;al.= 6 *6 6 6 *6 =;al= 6 I O T U W X Y Z a b c d e l h f g m j k n p u w v r s y y I O T U W X Y Z a b c d e l h f g m j k n p u w v r s y y Z d a Y e f b U W O I z z c X T o 00 rotation of 6 o 0 rotation of 6 o 00 rotation of 69 ontact size * x or y *6 0 6 x or y *6 6 6 T U W T U W X Y Z a b c T U W X Y Z c f a b d g h i h W X Y Z a b c d f j k m n p r p g Z s d e h k j m f g W U T a Z Y X d c b j k m n p q r u s t v w x y z t u v w x y z T U W X Y Z X T U Y 0 6 ontact size * k *ot tooled up, can be tooled up on request. ontact actory. O

21 hell Types Wall mounting receptacle OUTI O.9 I. O IZ 6. I. O IZ.0 I. O OT IZ. I. O 0 IZ OI ll dimensions are in mm onnector O Thread / U /0 U /0 U /0 U /0 U 0 U 0 U / U / U / U / U / U.00 U /6 U /6 U Thread / /6 /6 /0 U /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U able onnecting eceptacle 0 0 ll dimensions are in mm onnector Thread / U /0 U /0 U /0 U /0 U 0 U 0 U / U / U / U / U / U U /6 U /6 U Thread / /6 /6 /0 U /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U O 9

22 hell Types ox mounting receptacle 0 0 OUTI O.9 I. O IZ 6. I. O IZ.0 I. O OT IZ. O 0 IZ ll dimensions are in mm onnector Thread / U /0 U /0 U /0 U /0 U 0 U 0 U / U / U / U / U / U U /6 U /6 U traight lug Q ll dimensions are in mm onnector Thread Q max Thread / U /0 U /0 U /0 U /0 U 0 U 0 U / U / U / U / U / U U /6 U /6 U / /6 /6 /0 U /0 U /0 U /0 U 0 U / / / / /6U /66U /60 U ote oth versions, straight and diamond knurling available on coupling ring. or details, contact factory. O 0

23 hell Types ight angle plug 0 0 Q max ll dimensions are in mm onnector Thread T Q max Thread / U /0 U /0 U /0 U /0 U 0 U 0 U / U / U / U / U / U U /6 /6 U / /6 /6 /0 U /0 U /0 U /0 U 0 U / / / / 9/ /60 U 6.0 /66 U ote oth versions, straight and diamond knurling available on coupling ring. or details, contact factory. hell Types ox mounting receptacle OUTI O.9 I. O IZ, 6 0. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector Thread / /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U O

24 able onnecting eceptacle Q ll dimensions are in mm onnector Thread / /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U hell Types ront box mounting receptacle OUTI O.9 I. O IZ,6 0. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector max max O

25 ack ox ounting eceptacle OUTI O.9 I. O IZ, 6 0. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector Thread / /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U hell Types traight plug Q ll dimensions are in mm onnector Q max Thread / /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U O

26 ight ngle lug Q max ll dimensions are in mm onnector Q max Thread max max / /0 U /0 U /0 U 0 U / / / / 9/ /60 U /66 U ote oth versions, straight and diamond knurling available on coupling ring. or details, contact factory. hell Types am nut receptacle UT W 6 X. TI T OI ll dimensions are in mm hell ef. ef. ef. ef. ef. ef. ef. ef W ef O

27 hell Types am nut receptacle Oing ll dimensions are in mm hell Wall Thickness Thread in. ax / /0 U /0 U /0 U 0 U / / / /./6U /60 U /66 U hell Types anel mounting plug connector e d e ll dimensions are in mm hell d ax d e + 0. l ~ l + 0. l O

28 ack ccessories olid backshell without grommet and sleeve lass Q ll dimensions are in mm onnector Thread / /6 /6 /0 U /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U max for max for Q max 6.0 Thread / U / U / U /0 U /0 U /0 U /0 U 0 U /6 U /6 U /6 U /6 U / U U / 6 U olid ackshell With rommet & leeve lass Q ll dimensions are in mm onnector Thread or lug type or eceptacle Q class max max max for for 9 /.0 /6 0. /6 0. /0 U.0 /0 U.0 /0 U 6. /0 U U 9.0 /.0 /. /.0 /.0 /6U /66U /66 U ote oth versions, straight and diamond knurling available on back accessories. or details, contact factory. O 6

29 ack ccessories train relief backshell with grommet and sleeve lass and ll dimensions are in mm onnector Thread class / /6 /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U max for max for max ight ngle ackshell With Or Without rommet lass, & Q ll dimensions are in mm onnector Thread class / /6 /6 /0 U /0 U /0 U /0 U 0 U / / / / /6U /66U /66 U max for max for max Q max Thread / U / U / U /0 U /0 U /0 U /0 U 0 U /6 U /6 U /6 U /6 U / U U / 6 U ote oth versions, straight and diamond knurling available on back accessories. or details, contact factory. O

30 daptor O ing hell size Thread 0 / /6 /0 /0 0 / / / / / Ordering Information XXYY Where XX hell YYThread / ackshell ccessories O I I T U TI U U UT hell size Thread / / /.9/ 6./6 / /6 / 0 / 0 0./ / ote: ubber ush supplied in acking In case of inner metal urrele is not required/supplied O

31 eat hrink oot adaptor () hell size in. ax. T / /0 U /0 U 0 U / / U / / /6 U /66 U /66 U ack ccessories able clamp 0 Use 0 sleeves ll dimensions are in mm art number hell size ax O of cable Thread 0 0, / 06, /0 0 6, / , /6 06, / / O 9

32 O eoprene leeve 0 ubber bushing. rotects wire bundles and unjacketed cables from possible damage by cable clamp. 0 ll dimensions are in mm art number ad ad Other ccessories lain flat gasket or and 9 flange mounted receptacles ll dimensions are in mm O O T art number hell size max T & & 6 & O 0

33 rotective ap or eries 0 or receptacles as internal threads and is used on all receptacles. asket is provided in the dust cap forming a watertight seal. X X ll dimensions are in mm art number hell size Thread / / / / /... /. 0.. / / / / otes :... or protective caps with nylon cord, contact factory. tandard lating is ad. or alternative finishes, contact factory. tandard straight knurling. or diamond knurling on caps, contact factory. Other ccessories rotective cap for series 0 or plugs as external threads and is used on all plugs where a coupling ring is provided. X X ll dimensions are in mm art number hell size Thread / / / / 0 / / / / 6 / 0 / O

34 Other ccessories rotective cap for 9 series 90 or lugs rotective ap or 9 eries 90 or eceptacle '' '' '' '' '' I O. O. & T O O. + O I '' '' I O. O. & T O O. + O I '' ll dimensions are in mm IZ '' X..0 '' X '' / '' I ll dimensions are in mm IZ '' X '' '' /0.0.0 '' I XX ;aps for I0 Threded version 9;aps for I0 everse ayonet version :aps with tainless steel aterial,omit for luminium 0:ust cap suitable for plug connector 0:ust cap suitable for eceptacle connector hell 0,,,,,6, 6,,0,,,,,6,0 ttachment tandard chain :ylon ord : wire ope with ylon jacket ; ead chain assivated Omit for standard ength for special length plz specify length in cm hell inish eviation tandardadmium plating with olive rab chromate finish (Omit eviation) 6Zn obalt reen inish o ompliant 6Zn obalt ack inish o ompliant :lectroless ickel inish o ompliant 60:lack nodize inish 6:lectrophoratic lack onconductive O

35 Other ccessories ummy receptacle 0 O O X ll dimensions are in mm art number (see note) Thread / /0 /0 /0 /0 0 0 / / / / / / max ote: The dash number also indicates shell size. pecial ccessories or special accessories, please contact factory with specifications and drawings. mphenol has inhouse capability to meet and custom build your special accessories requirements for its range of I0 and 9 series connectors. or 9 onnector odification ess grommet & backshell 0/ ess contacts 6 old plated contacts T 00 etric threads in flange holes 9 ayonet ersion with teel wear pin (for receptacle connector) I lug connector with grounding finger eavy duty coupling ring O

36 /9 onnector ccessories rimp contact ontacts for \9 connectors are machined from copper alloys and silver plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity; the size 6 and socket contacts are of the closed entry design. old plated contacts are also available. art umber or rimp ontacts only* in/ ocket ating nd Wire arrel llowable Wire size Test urrent*** mps in ocket in ocket in ocket 6 hort 6 ong ** 6 0 ** in ocket 0** 6 0 in ocket 6** in ocket ** 0 * older contacts are not sold as separate items. art numbers shown here are for crimp contacts only. ** When using wire adapter sleeve shown. *** ontact rating as stated are test ratings only. The connecter may not withstand full rated current through all contacts continuously. lease note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer`s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. /9 onnectors pplication tools When proprietary crimp contacts are employed rather than the standard approved solder contacts, the following application tools are recommended for use. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. TOOI T rimping Tool ositioner/ Turret Insertion Tool emoval Tool 0/0 * 0 it 0/0 * 0 0 it ** ** ** ** ** ** it in 0 ocket 6 in 0 ocket 6 * Use aniels Turret T9 or stro Tool o. Turret 6666 ** or appropriate crimp tool and positioner refer to ico rimping Tool o. Tools used with rbor ress 6 O

37 /9 eries onnectors To obtain the specific connector required, write down the connector number from the typical example below. Only inserts shown in the availability chart shown on page can be specified. onnectors are delivered with protective plastic dust covers. Include premating contact designation only if premating contact is required. The second letter in the premating contact designation stands for the actual contact position. at the end of the connector number indicates telescopic bushing provided W eries designation Threaded version 9 ayonet version older rimp hell style 00 Wall mounting receptacle T 0 0 able connecting receptacle ox mounting receptacle ack box mounting receptacle lug without accessories, suitable only of straight accessories traight plug am nut eceptacle am nut eceptacle with threads to accept accessories lug suitable for right angle back shell to interlock 0 90 plug onnector class olid backshell. pplicable to straight plug nvironment resisting with grommet seal and strain relief backshell. 06 style includes a front gasket seal nvironment resisting with grommet seal, lightweight, shorter overall length traight threaded backshells upplied with different diameter sizes to suit varying able sizes, used for unshielded cable eat shrink tubing with grommet Q eat shrink tubing with shield braid termination & grommet ackshell with metal ferrule for shielded cable ackshell without metal ferrule for unshielded cable remating contact designation ee pages to lternate positions W X Y Z (o suffix ormal) ee insert orientations on page. ontact type in contacts ocket contacts tandard ilver plating ote : ontact factory for gold plating part number. ee pages to hell size 0, 0,,,,, 6, 6,, 0,,,,, 6. hell finish tandard admium plating with olive drab chromate finish lternate finishes. admium free zinccobalt plating with olive drab chromate finish6. admium free zinccobalt plating with black finish (6). lectroless ickel plating() or details contact factory. otice : ll information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances, mphenol reserves the right to change specifications without notice. This publication 00 9 eries onnectors supercedes all existing mphenol literature on 9 eries onnectors. O

38 .O OIITIO ITIO 9 o older illing To ontact g arts With etric ontacts rimp, Insert.shell 6 0. icron old lated ontacts 9 If added to receptacle part number connector supplied with wear pin 9 If added to lug part number connector supplied with oller tud TY OOT OT 6 UI 0X XX I OTT UIT XX W size 0/ OTT 9 OT & 0 Y UTY OUI I Z IT WIT OW O ZOO TI T WIT T/9/0 TI OTT I U O WIT OUI IU Q QU T I TO T (00/00/0/0/0/0) 6 0 XX 0XX T 00 TI T O I 9 T TU U 0 TI T OUI WI / I ITT I ITO IT XX TI T WIT T WIT TI XT T 6 daptor with land eavy duty cring X X 9 onnector w/o / O 6

39

40 une Operations angalore Operations Our offices in India: TI QUT outhern egion orthern and astern egion 0, hosari Industrial rea, une 06. Tel.: , 060 ax : mail : kmurali@amphenolin.com sales@amphenolin.com 9, th loor, igh oint I, alace oad, angalore Tel.: 909, 00 ax : 909 mail : th loor, hiranjiv Tower,, ehru lace, ew elhi Tel. : 969 Telefax : 9696 mail : vbhavsar@amphenolin.com xport 0, hosari Industrial rea, une 06, India. Tel.: , 06 ax : mail : svpatil@amphenolin.com Western egion 0, hosari Industrial rea, une 06. Tel.: 9 0 9, 06 ax: 9 0 0, 9 mail : sunilp@amphenolin.com entral egion 0, st loor, m ri lassic, arojinidevi oad, ecunderabad Telefax : mail : pprasad@amphenolin.com

41 ouser lectronics uthorized istributor lick to iew ricing, Inventory, elivery & ifecycle Information: mphenol: