TX14/15 SERIES CONNECTORS
|
|
|
- Erin Rose
- 5 years ago
- Views:
Transcription
1 The leaf-type design (non-pin) contact of this board-to-board connector is superior in reliability and stability due to its resistance to twisting. The receptacle (TX1) and plug (TX15) combination can be arranged in horizontal, vertical or parallel connections. Straight through hole and right angle through hole types are available. With 5 variable heights of the straight through hole type, this series is particularly adaptable to parallel board assemblies spaced within a range of 12 to 20mm ( "). These connectors are ideal for all types of office/factory automation equipment, computers, and other electronic equipment. GENERAL SPEIIATIONS EATURES Greater stability and reliability due to extra long contact wipe Leaf-type contact design resists damage from twisting irst-to-make-last-to-break contact action Nine optional stacking heights: 12 to 20mm (.72 to.787"), 1mm (.039") intervals 16 optional polarization keying positions With/without hook pin onnector Profile (Ref.) Number of 30 to 80, 100, 120, 10, 160, 180, 200 ontact Spacing urrent Rating Dielectric Withstanding Voltage Insulation Resistance ontact Resistance Operating Temperature 1.27mm (.050"), Double row 0.5 Amps 500 VA r.m.s. (for one minute) 100 megohms min. 0 milliohms max. -0 to +80 PB Thickness 1.6mm (0.063") MATERIALS AND INISHES Description ontact Insulator Spacer Materials/inishes opper Alloy onnecting area: Gold 0.1µm (.00000") min. over Nickel Terminal area: Tin plating Glass-filled Nylon (UL9V-0, Black) Glass-filled Nylon (UL9V-0, Black) Phosphor Bronze/Tin plating ORDERING INORMATION TX** ** * * ** * * 1 Series TX1/TX15 30, 0, 50, 60, 70, 80, 100, 120, 10, 160, 180, 200 onnector Type P Plug R Receptacle Mating Height ode (ST) 6 to 10 (LT) None Termination Style ST Straight Through Hole LT Right Angle Through Hole Mounting Ears M With Mounting Ears Blank Without Mounting Ears H With N Without inish ode 1 onnecting Area: Gold 0.1µm (.00000") min. over Nickel Terminal Area: Tin plating Dimensions in mm (inches).
2 TX1 REEPTALE STRAIGHT THROUGH HOLE (With Mounting Ears) TX1 **R *ST M*1 TX15 PLUG STRAIGHT THROUGH HOLE (With Mounting Ears) TX15 **P *ST M*1 7 (.276 ) 18.6 to to 22.6 (.732 to.890) (.732 to.890) 12 to 20 (.72 to.787 ) STRAIGHT THROUGH HOLE (Without Mounting Ears) TX1 **R *ST N1 7 (.276 ) STRAIGHT THROUGH HOLE (Without Mounting Ears) TX15 **P *ST N*1 7 (.276 ) ANGLE THROUGH HOLE (With Mounting Ears) TX1 **R LT M*1 ANGLE THROUGH HOLE (With Mounting Ears) TX15 **P LT M* (.992) 7 (.276 ) Note : R Receptacle, P Plug Receptacle a Insulator Height (Straight Through Hole) Mating Height ode Receptacle a 8.9 (.350) 9.9 (.390) 10.9 (.29) 11.9 (.69) 12.9 (.508) Plug b 9.2 (.362) 10.2 (.02) 11.2 (.1) 12.2 (.80) 13.2 (.520) Plug b Parallel Board-to-Board Distance Plug Receptacle Mating Height ode (.72) 13 (.512) 1 (.551) 15 (.591) 16 (.630) 7 13 (.512) 1 (.551) 15 (.591) 16 (.630) 17 (.669) 8 1 (.551) 15 (.591) 16 (.630) 17 (.669) 18 (.709) 9 15 (.591) 16 (.630) 17 (.669) 18 (.709) 19 (.78) (.630) 17 (.669) 18 (.709) 19 (.78) 20 (.787) Dimensions and specifications subject to change without notice.
3 TX1 REEPTALE STRAIGHT THROUGH HOLE (ST) TYPE WITH MOUNTING EARS (M): 30 TO 120 ONTATS With : TX1-**R- ST-MH1 Without : TX1-**R- ST-MN1 D w 0. x t 0.3 ( w.016 x t.012) (Note 1) 2.6 (.102) 3.1 (.122) 0.5 (.020).9 (.193) + 0 (.000) 0.2 (.008) Note 2: Shown with hook pins. Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 Polorization Key Polorization Key (Note 3) (Note 3) A A D D Note 3: Holes on both sides are needed for hook pin type. A D ( -.012) 30 TX1-30R- ST-M* (.700) (.936) 27.9 (1.100) 3.98 (1.377) 0 TX1-0R- ST-M* (.950) (1.186) 3.29 (1.350) 1.33 (1.627) 50 TX1-50R- ST-M* (1.200) 36.8 (1.36) 0.6 (1.600) 7.68 (1.877) 60 TX1-60R- ST-M* (1.50) 2.83 (1.686) 6.99 (1.850) 5.03 (2.127) 70 TX1-70R- ST-M* (1.700) 9.18 (1.936) 53.3 (2.100) (2.377) 80 TX1-80R- ST-M* (1.950) (2.186) (2.350) (2.627) 100 TX1-100R- ST-M* (2.50) (2.686) (2.850) 79.3 (3.127) 120 TX1-120R- ST-M* (2.950) (3.186) (3.350) (3.627) Dimensions Dimensions in mm in mm (inches). (inches).
4 TX1 REEPTALE STRAIGHT THROUGH HOLE (ST) TYPE WITH MOUNTING EARS (M): 10 TO 200 ONTATS With : TX1-**R- ST-MH1 Without : TX1-**R- ST-MN1 D w 0. X t 0.3 (w.016 Xt.012) 6.99 (1.850) (Note1) Porarizing 2.6 (.102) 3.1 (.122) 0.5 (.020).9 (.193) + 0 (.000) 0.2 (.008) B (Note 3) Polorization Key (Note 3) Polorization Key A A A A B B D D A B D ( -.012) 10 TX1-10R- ST-M* (1.700) (3.550) (3.786) (3.950) (.227) 160 TX1-160R- ST-M* (1.950) (.050) (.286) (.50) (.727) 180 TX1-180R- ST-M* (2.200) (.550) (.786) (.950) (5.227) 200 TX1-200R- ST-M* (2.50) (5.050) (5.286) (5.50) 15.7 (5.727) Dimensions and specifications subject to change without notice.
5 TX1 REEPTALE STRAIGHT THROUGH HOLE (ST) TYPE WITHOUT MOUNTING EARS (N): 30 TO 120 ONTATS Without : TX1-**R- ST-N1 w 0. x t 0.3 ( w.016 x t.012) 3.1 (.122) (Note 1).9 (.193) + 0 (.000) 0.2 (.008) D Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 Polorizing Key Polorizing Key A A A D ( ) 30 TX1-30R- ST-N (.700) (.936) (1.039) 0 TX1-0R- ST-N (.950) (1.186) (1.289) 50 TX1-50R- ST-N (1.200) 36.8 (1.36) (1.539) 60 TX1-60R- ST-N (1.50) 2.83 (1.686) 5.3 (1.789) 70 TX1-70R- ST-N (1.700) 9.18 (1.936) (2.039) 80 TX1-80R- ST-N (1.950) (2.186) (2.289) 100 TX1-100R- ST-N (2.50) (2.686) (2.789) 120 TX1-120R- ST-N (2.950) (3.186) (3.289) Dimensions Dimensions in mm in (inches). mm (inches).
6 TX1 REEPTALE STRAIGHT THROUGH HOLE (ST) TYPE WITHOUT MOUNTING EARS (N): 10 TO 200 ONTATS Without : TX1-**R- ST-N1 w0. X t0.3 (w0.16 X t0.12) 6.99 (1.850) 3.1 (.122) ompany Logo (Note 1).9 (.193) + 0 (.000) 0.2 (.008) B D Note 1 Insulator height. Refer to Mating Height Table. Polorizing Key PB Hole Patterns (Ref.) 10, , 200 Polorizing Key A A B A A B A B D (-.012) 10 TX1-10R- ST-N (1.700) (3.550) (3.786) (3.889) 160 TX1-160R- ST-N (1.950) (.050) (.286) (.389) 180 TX1-180R- ST-N (2.200) (.550) (.786) (.889) 200 TX1-200R- ST-N (2.50) (5.050) (5.286) (5.389) Dimensions and specifications subject to change without notice.
7 TX1 REEPTALE RIGHT ANGLE THROUGH HOLE (LT) TYPE WITH MOUNTING EARS (M): 30 TO 120 ONTATS With : TX1-**R-LT-MH1 Without : TX1-**R-LT-MN1 D 2.5 (.098) 0.5 (.020) 3 (.118) 15.5 (.610) 3.1 (.122) 3.7 (.16).9 (.193) + 0 (.000) 0.2 (.008) w0. X t0.3 (w.016 X t.012) (Note 1) Shown with hook pins. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 A A D D Note 2: Applicable screws for without-hook-pin type: M2 A D (-.012) 30 TX1-30R-LT-M* (.700) (.936) 27.9 (1.100) 3.98 (1.377) 0 TX1-0R-LT-M* (.950) (1.186) 3.29 (1.350) 1.33 (1.627) 50 TX1-50R-LT-M* (1.200) 36.8 (1.36) 0.6 (1.600) 7.68 (1.877) 60 TX1-60R-LT-M* (1.50) 2.83 (1.686) 6.99 (1.850) 5.03 (2.127) 70 TX1-70R-LT-M* (1.700) 9.18 (1.936) 53.3 (2.100) (2.377) 80 TX1-80R-LT-M* (1.950) (2.186) (2.350) (2.627) 100 TX1-100R-LT-M* (2.50) (2.686) (2.850) 79.3 (3.127) 120 TX1-120R-LT-M* (2.950) (3.186) (3.350) (3.627) Dimensions Dimensions in mm in (inches). mm (inches).
8 TX1 REEPTALE RIGHT ANGLE THROUGH HOLE (LT) TYPE WITH MOUNTING EARS (M): 10 TO 200 ONTATS With : TX1-**R-LT-MH1 Without : TX1-**R-LT-MN1 D 15.5 (.610) 3 (.118) 2.5 (.098) 6.99 (1.850) 0.5 (.020) 3.1 (.122) 3.7 (.16).9 (.193) + 0 (.000) 0.2 (.008) w0. X t0.3 (w0.16 X t0.12) (Note1) B Shown with hook pins. PB Hole Patterns (Ref.) 10, , 200 A A A B B D D Note 2: A Applicable screws for without-hook-pin type: M2 A B D ( -.012) 10 TX1-10R-LT-M* (1.700) (3.550) (3.786) (3.950) (.227) 160 TX1-160R-LT-M* (1.950) (.050) (.286) (.50) (.727) 180 TX1-180R-LT-M* (2.200) (.550) (.786) (.950) (5.227) 200 TX1-200R-LT-M* (2.50) (5.050) (5.286) (5.50) 15.7 (5.727) Dimensions and specifications subject to change without notice.
9 TX15 PLUG STRAIGHT THROUGH HOLE (ST) TYPE WITH MOUNTING EARS (M): 30 TO 120 ONTATS With : TX15-**P- ST-MH1 Without : TX15-**P- ST-MN (.130) 5.9 (.232) w0. X t0.3 (w0.16 X t0.12) D (Note1) 2.6 (.102) Note 2: Shown with hook pins. Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 (Note 3) (Note 3) Polarization Key Polarization Key A A D D Note 3: Holes on both sides are needed for hook pin type. A D ( ) 30 TX15-30P- ST-M* (.700) (.9) 27.9 (1.100) 3.98 (1.377) 0 TX15-0P- ST-M* (.950) (1.19) 3.29 (1.350) 1.33 (1.627) 50 TX15-50P- ST-M* (1.200) (1.) 0.6 (1.600) 7.68 (1.877) 60 TX15-60P- ST-M* (1.50) 3.03 (1.69) 6.99 (1.850) 5.03 (2.127) 70 TX15-70P- ST-M* (1.700) 9.38 (1.9) 53.3 (2.100) (2.377) 80 TX15-80P- ST-M* (1.950) (2.19) (2.350) (2.627) 100 TX15-100P- ST-M* (2.50) 68.3 (2.69) (2.850) 79.3 (3.127) 120 TX15-120P- ST-M* (2.950) (3.19) (3.350) (3.627) Dimensions Dimensions in mm in (inches). mm (inches).
10 TX15 PLUG STRAIGHT THROUGH HOLE (ST) TYPE WITH MOUNTING EARS (M): 10 TO 200 ONTATS With : TX15-**P- ST-MH1 Without : TX15-**P- ST-MN1 B (1.850) (.130) 5.9 (.232) 2.6 (.102) w0. X t0.3 (w0.16 X t0.12) D (Note1) Note 2: Shown with hook pins. Insulator height. Refer to Mating Height Table. (Note 3) PB Hole Patterns (Ref.) 10, , 200 (Note 3) Polarization Key Polarization Key A A A B D Note 3: B D A Holes on both sides are needed for hook pin type. A B D ( -.00) 10 TX15-10P- ST-M* (1.700) (3.550) (3.79) (3.950) (.227) 160 TX15-160P- ST-M* (1.950) (.050) (.29) (.50) (.727) 180 TX15-180P- ST-M* (2.200) (.550) (.79) (.950) (5.227) 200 TX15-200P- ST-M* (2.50) (5.050) 13.7 (5.29) (5.50) 15.7 (5.727) Dimensions and specifications subject to change without notice.
11 TX15 PLUG STRAIGHT THROUGH HOLE (ST) TYPE WITHOUT MOUNTING EARS (N): 30 TO 120 ONTATS Without : TX15-**P- ST-N1 D (.130) (Note 1) w0. X t0.3 (w0.16 X t0.12) Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 Polarization Key Polarization Key A A A D (-.00) 30 TX15-30P- ST-N (.700) (.9) (1.039) 0 TX15-0P- ST-N (.950) (1.19) (1.289) 50 TX15-50P- ST-N (1.200) (1.) (1.539) 60 TX15-60P- ST-N (1.50) 3.03 (1.69) 5.3 (1.789) 70 TX15-70P- ST-N (1.700) 9.38 (1.9) (2.039) 80 TX15-80P- ST-N (1.950) (2.19) (2.289) 100 TX15-100P- ST-N (2.50) 68.3 (2.69) (2.789) 120 TX15-120P- ST-N (2.950) (3.19) (3.289) Dimensions in mm (inches). Dimensions in mm (inches).
12 TX15 PLUG STRAIGHT THROUGH HOLE (ST) TYPE WITHOUT MOUNTING EARS (N): 10 TO 200 ONTATS Without : TX15-**P- ST-N1 D B ± 0.1(.00) (1.850) (.130) (Note 1) w0. X t0.3 (w0.16 X t0.12) Insulator height. Refer to Mating Height Table. PB Hole Patterns (Ref.) 10, , 200 Polarization Key Polarization Key B B A A A A A B D ( ) TX15-10P- ST-N (1.700) (3.550) (3.79) (3.889) 160 TX15-160P- ST-N (1.950) (.050) (.29) (.389) 180 TX15-180P- ST-N (2.200) (.550) (.79) (.889) 200 TX15-200P- ST-N (2.50) (5.050) 13.7 (5.29) (5.389) Dimensions and specifications subject to change without notice.
13 TX15 PLUG RIGHT ANGLE THROUGH HOLE (LT) TYPE WITH MOUNTING EARS (M): 30 TO 120 ONTATS With : TX15-**P-LT-MH1 Without : TX15-**P-LT-MN (.130) 5.9 (.232) D 2.5 (.098) 9. (.370) 15.8 (.622) w0. X t0.3 (w0.16 X t0.12) (Note1) Shown with hook pins. PB Hole Patterns (Ref.) 30, 50, 70 0, 60, 80, 100, 120 A A D D Note 2: Applicable screws for without-hook-pin type: M2 A D (-.00) 30 TX15-30P-LT-M* (.700) (.9) 27.9 (1.100) 3.98 (1.377) 0 TX15-0P-LT-M* (.950) (1.19) 3.29 (1.350) 1.33 (1.627) 50 TX15-50P-LT-M* (1.200) (1.) 0.6 (1.600) 7.68 (1.877) 60 TX15-60P-LT-M* (1.50) 3.03 (1.69) 6.99 (1.850) 5.03 (2.127) 70 TX15-70P-LT-M* (1.700) 9.38 (1.9) 53.3 (2.100) (2.377) 80 TX15-80P-LT-M* (1.950) (2.19) (2.350) (2.627) 100 TX15-100P-LT-M* (2.50) 68.3 (2.69) (2.850) 79.3 (3.127) 120 TX15-120P-LT-M* (2.950) (3.19) (3.350) (3.627) Dimensions in mm (inches). Dimensions in mm (inches).
14 TX15 PLUG RIGHT ANGLE THROUGH HOLE (LT) TYPE WITH MOUNTING EARS (M): 10 TO 200 ONTATS With : TX15-**P-LT-MH1 Without : TX15-**P-LT-MN1 B (1.850) (.130) 5.9 (.232) 9. (.370) 15.8 (.622) D 2.5 (.098) w0. X t0.3 (w0.16 X t0.12) (Note1) Shown with hook pins. PB Hole Patterns (Ref.) 10, , 200 A A A A B B D D Note 2: Applicable screws for without-hook-pin type: M2 A B D ( -.00) 10 TX15-10P-LT-M* (1.700) (3.550) (3.79) (3.950) (.227) 160 TX15-160P-LT-M* (1.950) (.050) (.29) (.50) (.727) 180 TX15-180P-LT-M* (2.200) (.550) (.79) (.950) (5.227) 200 TX15-200P-LT-M* (2.50) (5.050) 13.7 (5.29) (5.50) 15.7 (5.727) Dimensions and specifications subject to change without notice.
3M HDC Socket.100 Right Angle, PCB, 3 or 4-Row, Solder Tail or Press-Fit HDC Series
M HDC Socket.100 Right Angle, PCB, or 4-Row, Solder Tail or Press-Fit HDC Series High density -row version, up to 240 contacts single bay Mates with -row single plugs and headers High density 4-row version,
D-DF. Right angle version: full gold plating over 2µm. Straight version: full gold plating over 2µm
- -ub connectors - crew-machined ontacts I MHIN ONTT ONNTOR HRTRITI pecifications onnectors according to MIL 208 - N925-H5 Materials and lating hells teel tinned, with dimples on plug connector Insulator
Product Series Specification Document
Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed
PRODUCT SPECIFICATION
CONNECTOR CONNECTOR 1 of 6 CONNECTOR 1.0 SCOPE This Product Specification covers the dip type for 13pins slimline SATA receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMER(S)
PRODUCT SPECIFICATION SEARAY CONNECTOR SYSTEM
SEARAY ONNETOR SYSTEM SEARAY PLUG ONNETOR SEARAY REEPTALE ONNETOR UP2009-2227 SEARAY ONNETOR SYSTEM 1 of 8 PS-45970-001 T. GREGORI J. OMERI J. OMERI SEARAY ONNETOR SYSTEM 1.0 SOPE This Product Specification
DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE. 4 1.2 Description. 4 2.0 APPLICABLE DOCUMENTS
3M CP2 Press-Fit Header
M CP2 Press-it Header 25 mm basic system unit 8, 44 and 50 mm module 2 mm grid spacing allows for high signal density at low cost Eye of the Needle compliant pin press-fit design reduces manufacturing
Blower Motor 3P Connector
1. Scope Blower Motor P Connector 1.1 Content This specification covers the requirements for product performance, test methods and quality assurance provisions of Blower Motor P connector. Applicable product
Qualification Test Report
Qualification Test Report 501-97 28Jun10 Rev E Connector, Shielded, Miniature Circular DIN, PCB Mounted 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics Mini DIN Printed Circuit Board
Product Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
Connector~Tech Providing Harsh Environment Connector
Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction
0.3mm Pitch Connector for FPC. FF02S Series
COMPONENTS PRODUCT INFORMATION NEW 0.3mm Pitch Connector for FPC FF02S Series CONNECTOR MB-0146-2 July 2006 RoHS Compliant Outline The FF02S Series is a 0.3mm pitch low-profiled connector used for FPC
3M MetPak CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series
M MetPak CP2 Press-Fit Header 25 mm basic system unit CompactPCI combines the benefits of PCI desktop architecture with the ruggedness of the U and 6U IEEE Eurocard form factor popularized by the VME bus
Single Module EN4165 ARINC BACC 65 EN4165. The New Standard Connector for Aircraft equipment and cabin systems. Advantages
Single Module EN4165 ARINC 809 - BACC 65 EN4165 The New Standard Connector for Aircraft equipment and cabin systems. Advantages Light weight composite, modularity, color coded, push pull coupling are the
EMI Filtered Connectors
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI @ the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution for
3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA
Page of 8 3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA Product Specification 78-50-0-7 Revised 08-09- Page of 8 Table of Contents Title
File E28476 Vol. 7 Sec. 44 Page 1 Issued: Vol. 23 Sec. 18 Revised: Vol. 67 Sec. 4 and Report D E S C R I P T I O N
File E28476 Vol. 7 Sec. 44 Page 1 Issued: 1990-08-07 Vol. 23 Sec. 18 Revised: 2014-04-18 PRODUCT COVERED: USR - Series SL.156 Connectors. D E S C R I P T I O N USR - SL-156 Connectors, Receptacle Part
ATC 200 A Series BX Ceramic Multilayer Capacitors
200 A Series BX Ceramic Multilayer Capacitors Case A Size Capacitance Range (.055" x.055") 5 pf to 0.01 µf Low ESR/ESL Mid-K Rugged High Reliability Construction Extended VDC Available, the industry leader,
PRODUCT SPECIFICATION
SCOPE 1.25mm 9(& 2$ 2 This specification covers the 1.25 mm PITCH WIRE TO BOARD CONNECTOR (DUAL TYPE) series PRODUCT NAME AND PART NUMBER
PRODUCT SPECIFICATION
1 of 10 H 1.0 GENERAL THIS SPECIFICATION COVERS.039 INCHES VERTICAL DDR II SOCKETS WITH BLANKED / FORMED CONTACT DESIGNED FOR PRINTED WIRING BOARD TO DUAL IN-LINE MEMORY MODULE INTERCONNECTION. IN ALL
2mm Hard Metric Connectors
A KYOCERA GROUP COMPANY 2mm Hard Metric Connectors Contents Introduction........................................ Technical Specifications............................. 2 Multi-Line Module Connectors for
Pin & Socket Connectors
Passive (friction) lock 1 to 1 circuit housings Panel and PCB mountable One piece strain reliefs available (42148 Series) Mating headers available (See notes 2, 3, and 4) Male and female terminals may
Imformation of C091D series
Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent
3M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle SBR Series 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak
ZIF Connectors. DLM Product Introduction Cannon has expanded the DL-ZIF Series. Materials and Finishes
L L Produt Introdution annon has expanded the L-ZI Series offering with the addition of the L (etal Shell) versions. The L uses a rugged nikel plated aluminum housing. The Shield-Loking ehanism feature
PRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
Ÿ 9-50-way std density Ÿ way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g.
Ÿ 9-50-way std density Ÿ 15-78 way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g., 3W3, 5W5, 8W8) Ÿ Feed-through capacitor & pi filter constructions
3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
Spezifikation Z56-xx Series ZIF FFC/FPC Connector 0,5mm Pitch Double Contact H1,96mm Piano
1 Scope This Specification covers the construction and characteristics of 0,5mm Pitch FFC and FPC (Flat Flexible Cable and Flat PCB Cable ) of Z56-xx ZIF Connector Series. The part shall satisfy the following
Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence
Metal can, sealed time delay relay, with 2PDT output 25,8 x 25,8 x 25,7 mm maxi. Mating socket SRE 410, SME 410 STF 410 see page 9
Series RE Hermetically sealed time delay single break relay for severe environmental conditions 2 Pdt 0 mp General characteristics Metal can, sealed time delay relay, with 2PDT output Sizes Mass Timing
C Electrical Connector Subsea / Underwater / Marine
www.r-marine.com Tel: + 0 ax: + 0 0 mail: sales@r-marine.com lectrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater
3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails
High Power Contacts - Up to 850A
8 Series igh Power Contacts igh Power Contacts - Up to 850 esigned to meet the harshest military requirements where high power and shielding are needed. 3 aluminum shell sizes available Size 19 (450 max);
American Zettler AZ742 RELAY Datasheet
American Zettler AZ74 RELAY Datasheet http://www.manuallib.com/american-zettler/az74-relay-datasheet.html FEATURES Dielectric strength 000 Vrms Low height:.7 mm Epoxy sealed version available 0 Amp switching
CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG
Page 1 of 27 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG Issue 6 June 2018 Document Custodian: European Space Agency see https://escies.org
SERIES 10 ELEKTRISCHE STECKVERBINDER FÜR MEERES- UND MARINETECHNIK HIGH PERFORMANCE UNDERWATER ELECTRICAL CONNECTORS
SERIES 0 ELEKTRISHE STEKVERINDER FÜR MEERES- UND MRINETEHNIK HIGH PERFORMNE UNDERWTER ELETRIL ONNETORS Leinestraße D-9 Neumünster Tel. +9 - - 98-0 Fax +9 - - 98 - http://www.gisma-connectors.de E-Mail:
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
CLASSix UTP Patch Cords
Features Patch Cords are used in the work area and cross-connect generic cabling applications Comprise a length of eight-wire flexible patch cable, terminated with snagless high quality, two eight-position
General-purpose Multi-Contact Circular Waterproof Connectors
General-purpose Multi-ontact ircular Waterproof onnectors RM-W Series Plug _ straight Ø. Ø Long backshell Overview High performance waterproof circular connectors and cable assemblies used in variety of
5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
2.3. Rockers. Contents
. SVRSealed Vehicle SVRSealed Vehicle Rocker Contents Description SVRSealed Vehicle Above Panel Rocker Switch............... Below Panel Rocker Switch............... Technical Data and Specifications..........
Base S C T B
OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect
Product Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
RJ Connector. IP 67 Receptacle I Unmated & Mated Overmolded with Cable I Mated Field Installable I Mated. RJ Connector I Range Overview
RJ Connector RJ Connector I Range Overview RJ Connector IP 67 Receptacle I Unmated & Mated I Mated I Mated 8-1 TW Technology Co., td. RJ Connector I Range Overview Range Overview Receptacle and Mating
PRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
MOLEX TAIWAN LTD ( GC ) TITLE : SINGLE PORT UP-RIGHT TYPE USB CONNECTOR
SINGLE PORT UP-RIGHT TYPE USB CONNECTOR 971205 1 of 8 1.0 SCOPE This specification covers the USB series product. 2.0 APPLICABLE DOCUMENTS The following documents form a part of this specification to the
Distinctive Characteristics
Distinctive haracteristics Miniature Toggles Series M ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggle has two fl atted sides which fit into a complementary
A B C D E F G H J K L M N P Q
onnectors Vertical ount Vertical ount rinted ircuit oard icro - ilter onnectors. These vertical mount connectors are ideal for flexible circuit or motherboard applications. ey eatures include gold plated
Product Data Sheet PD-0036-B. 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series
Product Data Sheet PD-0036-B 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series Page: 1 of 7 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2 3.1 Test Specimens...2 3.2 Standard Test
Terminal Block Accessories
Kliptite (Quick onnect) - Single Row Specifications: Terminal lock ccessories Kliptite (Quick onnect) accept standard female wire terminals. These Klipties are ideal for applications that require a positive,
REGLETA RECTA SIMPLE FILA
REGLET RECT SIMPLE FIL SERIE 2556 2556. Paso 2.54 mm. (0.100 ). Para soldar a PC Características! Disponible de 2 a 40 circuitos! Contactos con acabados dorado y estañado! Conecta con cajas y conectores
Mounting kits for insulation of power transistors
ounting kits for insulation of power transistors tel. 0..6.6.6 www.elitaliaweb.it fax 0.6.6.0.09 info@elitaliaweb.it ST STS ST 0 STS 0 for transistor TO TO TO 0 TO 0 version with mica wafer S with silicone
DC~40GHz) Interface Dimensions. Microwave Town mm Connectors
s Series (DC~40GHz DC~40GHz) MicrowaveTown connectors are 50Ω precision connectors. They are designed with excellent characteristics over the full frequency range up to 40GHz. connectors are mechanically
Product Specification
Product Specification 2013-10-21 FPC Connector 0.5mm Pitch SMT Type Bottom Contact H:2.0 Update List: Item Update Description Rev. Issued Date Revisor 1 New Edit A 2013/10/21 DLITY Prepared By DLITY Rechecked
TF Series Miniature Snap-acting Switches
Features/Benefits Broad range of operating forces Ratings up to 21 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics Portable tools Specifications
ATC 900 C Series X7R Ceramic RF Power Multilayer Capacitors
AT 900 Series X7R eramic RF Power Multilayer apacitors ase Size apacitance Range (.250" x.250") 0.01 µf to 1 µf Low ESR/ESL Mid-K Rugged onstruction High Reliability Available with Encapsulation Option*
ATC 700 B Series NPO Porcelain and Ceramic Multilayer Capacitors
ATC 700 Series NPO Porcelain and Ceramic Multilayer Capacitors Case Size Capacitance Range (.1" x.1") 0.1 pf to 5 pf Low ESR/ESL Zero TCC Low Noise High Self-Resonance Rugged Construction Established Reliability
This specification covers the requirements for product performance, test methods and quality assurance provisions of FG Terminal.
DESIGN OBJECTIVES The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore AMP Ltd makes no representation or warranty, express
WW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
Slide Switches, Vertical, Single or Dual Actuator
TSS Series Slide TSS Switches Series MATERIAL SPECIFICATIONS: Contacts...Copper w/gold plate over nickel Case Material...High temperature polyester (94-VO) Actuator Material...Polyester (94-VO) Terminals...Copper
TF Series Miniature Snap-acting Switches
Features/Benefits Broad range of operating forces Ratings up to 21 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics Portable tools Specifications
PRODUCT. Part. A1 Micro USB USB3140. Rev. Page. Description Doc USB3140.
1 PREL LIM MI IN AR RY 1.0 SCOPE. This specification covers performance, tests and quality requirements for the Receptacle (Type B, SMT, Vertical)..0 NAME AND PART NUMBER. Receptacle, 5 Pins, SMT, Type
PRELIMINARY PRODUCT SPECIFICATION. Part Number Product Description Doc Number
Page 1 PRELIMINARY Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the USB Type C Receptacle range. USB4050, USB4055, USB4060, USB4065. 2.0 PRODUCT NAME AND
Quad 10GBASE-T to XAUI Converter
T-ENET-QU-10G PS-248-3 FETURES + + (4) 10G Ethernet hannels + + Protocol conversion between 10GSE-T and XUI + + Perfect for routing multiple 10 Gigabit Ethernet connections into systems and to and from
MLCC with FLEXITERM. General Specifications GENERAL DESCRIPTION APPLICATIONS PRODUCT ADVANTAGES HOW TO ORDER
General Specifications GENERAL DESCRIPTION With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical
Commercial Generator Parts Catalog. PROTEC Series
Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,
CS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION
ROTARY SELETOR SWITHES (SMD) S-3 RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Wiper over Housing Terminal pin Base element Multi metal alloy Stainless steel (SUS 34) Epoxy
Distinctive Characteristics
Distinctive Characteristics Three methods of panel mounting: flat frame for flush with face or subpanel, snap-in, and PCB. Miniature Rockers Series M High insulating barriers increase isolation of circuits
Amphenol Amphenol-Tuchel Electronics GmbH. C 091 A/B/D Series. Circular Connectors.
mphenol mphenol-tuchel Electronics GmbH C 09 //D Series Circular Connectors www.industrial-amphenol.com Note from the CEO Ladies and Gentlemen, For over years mphenol has enjoyed success as the interconnection
Table of Contents Pin-Configuration Selection Guide for HDE, HDS, & EFP
Table of Contents -Configuration Selection Guide for HDE, HDS, & EFP Service Voltage Rating... Electrical Service Ratings... Ampacity Ratings by Contact... Electrical Service Ratings Explained... Operating
Protected. Main specifications. Additional specifications. Product adaptations
Protected 83 06 Double break switching Options for operation in stable positions Choice of actuators and fixing positions Main specifications Standard 83 06 0 stable lever positions 83 06 4 stable plunger
Overview. Benefits. Applications
KPS-MCC High Temperature 200 C SMPS Stacks 50 2,000 VDC (Industrial Grade) Overview KEMET Power Solutions - Military Case Code (KPS-MCC) High Temperature SMPS Ceramic Stacked Capacitors combine a robust
Features. Circuit Schematic. Typical Electrical Characteristics. Applications. Surface Mount EMI Filters Three Terminal Chips
Features Excellent performance in high current applications Non-polar, surface mountable Superior filtering characteristics Superb ability to withstand transient voltages and surge Offers exceptional solderability
HARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
MLCC with FLEXITERM. General Specifications GENERAL DESCRIPTION APPLICATIONS PRODUCT ADVANTAGES HOW TO ORDER C 104 K A Z 2 A
General Specifications GENERAL DESCRIPTION With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical
PTF Series Long Life Slide Potentiometer
*RoHS COMPLIANT Features Long life carbon element Assortment of resistance tapers 45 mm, 60 mm and 00 mm travel lengths Single and dual gang elements Long operational life Tracking error within ± db PTF
Eaton s Arrow Hart Controlled receptacles. Control marked receptacles are the ideal solution for minimizing energy usage.
Eaton s Arrow Hart Controlled receptacles Control marked receptacles are the ideal solution for minimizing energy usage Arrow Hart Controlled receptacles Dual and half s Product description 2-pole, 3-wire
Scalloped Square Square Model (Width) # of Resistors Circuit Industry Size Convex Convex Concave
MODE N SERIES N Series Thick Film hip Resistor rrays RoHS ompliant MODE STES Edge Finish / Termination Scalloped Square Square Model (idth) # of Resistors ircuit Industry Size onvex onvex oncave Model
Section 12. EC Cores PHYSICAL DIMENSIONS MAGNETIC DATA
Section 12. EC s PHYSICAL DIMENSIONS NUMBER TYPE A B C & F D E S T *-43517-EC *-44119-EC *-45224-EC *-47035-EC (EC35) (EC41) (EC52) (EC70) MAGNETIC DATA in. 1.358 ±.030.681 ±.006.374 ±.012.469.8955 ±.020.108
High Voltage MLC Chips
NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet
WK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
SULFURATION-RESISTANT CHIP RESISTOR
FEATURES ROHS ith good sulfuration-resistant performance Miniature and light weight. Suit for reflow and wave flow solder. Stable electrical capability, high reliability. Low assembly cost, suit for automatic
Surface Mount and Through-Hole Multilayer Ceramic Chip Stacked Capacitors KPS-MCC High Temperature 200 C SMPS, 50 2,000 VDC (Industrial Grade)
KPS-MCC High Temperature 200 C SMPS, 50 2,000 VDC (Industrial Grade) Overview KEMET Power Solutions (KPS) MCC Series High Temperature SMPS Ceramic Stacked Capacitors combine a robust and proprietary C0G/NPO
Rotary Switches AC09, 16 and 32
09, 16 and 32 igital code output type escription FUJI series rotary switches offer a wide choice of output codes. They feature sliding u-flashed contacts for high contact reliability. Inhibitor and parity
How To Order SHELL SIZE MATERIAL AND CONTACT TERMINATION CONTACT ARRANGEMENT ALTERNATE INSERT POLARIZATION
Pin contacts in a compression glass seal older pot or eyelet termination eak rate not in excess of.01 micron cu. ft./hr. 0 psi differential causes no detectable leakage in excess of.01 micron cu. ft./hr.
EV Series 1.5 Amp Sensitive SCRs. Description. Features. Surge capability > 15Amps Blocking voltage (V DRM / V RRM.
Sx02xS Series RoHS Description New mp sensitive gate SR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SR s junctions are glasspassivated to
Amphenol MS/97 SERIES STANDARD CIRCULAR THREAD COUPLED SOLDER AND CRIMP CONNECTORS
mphenol TO O. 0/0 /9 I T IU T OU O I OTO 9 I T IU YOT OU O I OTO , 9 9 I Introduction mphenol and 9 series are two series of threadcoupled connectors designed to meet the operating requirements of I 0.
ATC 800 C Series NPO Ceramic High RF Power Multilayer Capacitors
A 800 Series NPO eramic High RF Power Multilayer apacitors ase Size apacitance Range: (.250 x.250 ) 2.2 pf to 3000 pf High Q Ultra-Stable Performance ow ESR/ES High RF urrent/voltage High RF Power High
Vishay Dale Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount FEATURES RESISTANCE RANGE 18546
RH, NH FETURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 vailable in non-inductive styles (type NH) with ryton- Perry
GENERAL PURPOSE CAPACITORS
AMERICAN TECHNICAL CERAMICS GENERAL PURPOSE CAPACITORS Low Cost Multilayer Ceramic Capacitors For Surface Mount Applications Manufactured for ATC ISO 9001 REGISTERED COMPANY ATC 001-847, Rev. AA; 5/18
DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16
DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally
Ring encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life
E E mm Size encoder with mm height contribute to space saving and multifunctioning Typical Specifications Items Specifications Product Line Structure Dip ctuator l e n g t h(m m) Reflow Detent torque (mn
DATA SHEET: TEMPOWER2 ACB
Electrical haracteristics to IE 097, IE 097 Type Series AMERE RATING(A) AR0SB Standard RATED URRENT (max) [I n ](A) JIS,IE, EN, AS NEMA, ANSI Marine NEUTRAL OLE AMERES FRAME (A) NUMBER OF OLES 3 RATED
Excellent Integrated System Limited
Distributor of omchip Technology: Excellent Integrated System Limited Datasheet of DSQR400-HF - DIDE GEN PURP 80 M 0402 ontact us: sales@integrated-circuit.com Website: www.integrated-circuit.com Excellent
MS/Standard how to order
/tandard how to order I--5015 and I-5015 ype (older ontacts) 102 18 W () 1 2 5 7 8 1. onnector ype designates ilitary tandard * designates service class and with proprietary special * designates service
FASTON Terminals (Insulated and Uninsulated)
FSTON Terminals (Insulated and Uninsulated) FSTON ousings FSTON ousings Product Facts Straight, right-angle, multiple position and special application housings available Various materials and temperature
fischer connectors General Catalogue Edition 5.2
fischer connectors Edition. General Catalogue SUMMARY Ordering Information Mechanical Specifications Electrical Specifications Thermocouple Connectors Part number system and definitions, Body styles Coaxial,