Metal can, sealed time delay relay, with 2PDT output 25,8 x 25,8 x 25,7 mm maxi. Mating socket SRE 410, SME 410 STF 410 see page 9
|
|
- Carmella Thornton
- 5 years ago
- Views:
Transcription
1 Series RE Hermetically sealed time delay single break relay for severe environmental conditions 2 Pdt 0 mp General characteristics Metal can, sealed time delay relay, with 2PDT output Sizes Mass Timing range 25,8 x 25,8 x 25,7 mm maxi 60 g maxi 400 ms to s Finish Tin plated Mating socket SRE 40, SME 40 STF 40 see page 9 Operating conditions Input characteristics Supply voltage Supply current Contol voltage Recycle time Power loss Output characteristics from 2 to 32 V or from 8 to 32 V ( see Temperature range) 40 m at 28 V Trigerring is garantee for a pulse of 2 V during 20 ms 50 ms mini Contact rating 0 or 5 resistive load (see table) (28 Vdc or 5 Vac 400 Hz) 8 or 0 inductive load Life at rated current Protections ms cycles Undamaged by polarity reversal, Voltage tansient per MIL STD 704, EUROCE DO 60, IR 202 D including Spikes ± 600 V 0 µs Power voltage transient Minimum voltage 80 V 50 ms 8 V 5 ms Environmental conditions Temperature range Dielectric strenght etween all contacts and case Insulation resistance Vibrations 3 axis ( only mounting styles 2, 3, 0, and 2 ) Shocks Seal test see table 000 V rms > 000 MΩ 500 Vdc 30 g Hz 00 g 6 ms /2 sinus.0-8 cm 3 atm / s SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page / 9
2 Timing diagrams Time delay on operate ( code and ) + 28 Vdc Input voltage 0 Contacts Close NO Open T Time delay on release ( code D and E ) + 28 Vdc Input voltage 0 Contacts Close NO Open T Time delay on release with positive control ( code J and L ) + 28 Vdc Input voltage Vdc T 20 ms Contol voltage 0 Contacts Close NO Open T SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page 2 / 9
3 Part numbering system TIME DELY RELY RE *** SERIE LETTER OUTPUT CONTCT NUMER CONTCT Nbr P/N of PDT TYPE OF OPERTION External resistor determination Contct rating resistive load Fixed time on operate justable with external resistor on operate ratio0 D Fixed time on release justable with external resistor on release E ratio 0 J Fixed time on release with positive control justable with external resistor on release L with + control required time Rx = 0 K ( - ) minimum time maximum time defined in the time code Minimum time = 0 Key Key 2 Key 3 only for codes Q and T see pages 7 and 8 MOUNTING STYLE ND HEDER TYPE CODE MOUNTING HEDER E 2 F 2 G 3 K 0 P 2 Q 3 R 9 E T 8 W see pages 5, 6, 7 and 8 TIME CODE Four coded digits with the following meaning - first three digits, base time in millisecondes - last digits, number of zero to add base time ex: 300 ms : code 3000 SUPPLY VOLTGE ccuracy and temperature range CODE NUMER CCURCY TEMPERTURE RNGE from 2 to 32 V ± 0 % -40 C to +85 C from 2 to 32 V C ± 0 % -55 C to +25 C from 2 to 32 V E ± 5 % -40 C to +85 C from 2 to 32 V F ± 5 % -55 C to +25 C from 2 to 32 V H ± 3 % -55 C to +85 C from 8 to 32 V L ± 0 % -55 C to +85 C from 8 to 32 V R ± 0 % -55 C to +00 C from 8 to 32 V S ± 5 % -55 C to +85 C from 8 to 32 V T ± 5 % -55 C to +00 C from 8 to 32 V U ± 3 % -55 C to +00 C SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page 3 / 9
4 Circuit diagram D X2 D X2 C Solid state output Power Control voltage C Solid state output Power X X lue bead lue bead Fixed time ( code or D ) Fixed time with control voltage ( code J ) Rx Rx D X2 D X2 C Solid state output Power Control voltage C Solid state output Power X X lue bead lue bead djustable with external resistor ( code or D ) djustable with external resistor with control voltage ( code L ) Viewed from terminals side SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page 4 / 9
5 Termination styles 7,9 MX [.30 MX ] Type 2 [.079 ] Solder hooks 6,9 [.270 ] Type Gold plated pins, plugs-in socket,57±0,025 [.062±.00 DI PINS ] SILICONE RUER GSKET [.050 THK. ] 6,9 [.270 ] Type E Tined terminal, PC mounting,57 +0,05-0, [ DI PINS ] SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page 5 / 9
6 Mounting styles 25,8 MX [.025 MX ] 3,8 [.50 ] 5,9 35,5 [.396 ] 36,7 [.446 ] 25,8 MX [.025 MX ] 43,6 MX [.78 MX ] [.00 MX ] [.00 MX ] Housing Housing 2 4 [.56 ] 5,9 43,6 MX [.78 MX ] 36,7 [.446 ] 35,5 [.396 ] 3,8 [.50 ] 35,7 [.406 ] 43,6 MX [.78 MX ] 937] 20,6 [.80 ] 5,9 [.00 MX ] Housing 3 Housing 0 M3 Captive screw [.56 ] Coupling torque 0,45 m.n SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page 6 / 9
7 3,8 [.50 ] 5,9 5,9 35,5 [.396 ] 35,7 [.406 ] 36,7 [.446 ] 43,6 MX [.78 MX ] 43,6 MX [.78 MX ] [.00 MX ] [.00 MX ] 4-40 UNC 2 Captive screw Housing Housing 2 4 [.56 ] 5,9 KEY 2 KEY U V W X Y Z KEY [.406 ] 43,6 MX [.78 MX ] ,8 MX [.025 MX ] keying system 5,7 MX 00 MX ] 0,9 [.430 ] 9±0, [.354±.004 ] 4-40 UNC 2 Captive screw Housing 3 Coupling torque,45 m.n SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page 7 / 9
8 5,9 KEY 2 KEY U V W X Y Z KEY [.406 ] 43,6 MX [.78 MX ] ,8 MX [.025 MX ] keying system [.00 MX ] 0,9 [.430 ] 9±0, [.354±.004 ] M3 Captive screw Housing 8 5,9 35,7 [.406 ] 43,6 MX [.78 MX ] [.00 MX ] Coupling torque 0,45 m.n M3 2 [.079 ] MOUNTING PD Housing 9 4 [.56 ] SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page 8 / 9
9 Relay sockets proposal SOCKETS WITH NON REMOVLE CONTCTS RE SOKETS RE **** * SFE 40 2 * * RE **** *K SFE 40 2 * * RE **** *T *** SFE 40 5 * * SOCKETS WITH REMOVLE CONTCTS RE SOCKETS RE **** * SRE 40 * V * RE **** * SME 40 2 * RE **** * SFI 40 * RE **** *K SRE 40 * V * RE **** *K SME 40 3 K * RE **** *K SFI 40 * RE **** *T *** SME 40 2 G * RE **** *T *** SFI 40 * RE **** *Q *** SFI 40 T 2 * SINT JEN DE L RUELLE - FRNCE Tél : +33 (0) page 9 / 9
Military Qualified 10AT Series Snap Action Precision Position Switches
Military Qualified 10AT Series Snap Action Precision Position Switches FEATURES Stainless steel, hermetic seal construction Rated up to 4 amps, 30VDC MIL-PRF-8805 qualified Various mounting configurations
More informationŸ 9-50-way std density Ÿ way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g.
Ÿ 9-50-way std density Ÿ 15-78 way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g., 3W3, 5W5, 8W8) Ÿ Feed-through capacitor & pi filter constructions
More informationPRODUCT SPECIFICATION
CONNECTOR CONNECTOR 1 of 6 CONNECTOR 1.0 SCOPE This Product Specification covers the dip type for 13pins slimline SATA receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMER(S)
More informationConnector~Tech Providing Harsh Environment Connector
Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction
More informationDIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
More information3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationATC 100 A Series Porcelain Superchip Multilayer Capacitors
0 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") pf to 0 pf High Q Low ESR/ESL Low Noise Ultra-Stable Performance High Self-Resonance Established Reliability (QPL),
More informationBlower Motor 3P Connector
1. Scope Blower Motor P Connector 1.1 Content This specification covers the requirements for product performance, test methods and quality assurance provisions of Blower Motor P connector. Applicable product
More informationImformation of C091D series
Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent
More informationATC 100 A Series Porcelain Superchip Multilayer Capacitors
00 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") 0. pf to 00 pf High Q Ultra-Stable Performance Low ESR/ESL High Self-Resonance Low Noise Established Reliability
More informationAmerican Zettler AZ742 RELAY Datasheet
American Zettler AZ74 RELAY Datasheet http://www.manuallib.com/american-zettler/az74-relay-datasheet.html FEATURES Dielectric strength 000 Vrms Low height:.7 mm Epoxy sealed version available 0 Amp switching
More informationATC 200 A Series BX Ceramic Multilayer Capacitors
200 A Series BX Ceramic Multilayer Capacitors Case A Size Capacitance Range (.055" x.055") 5 pf to 0.01 µf Low ESR/ESL Mid-K Rugged High Reliability Construction Extended VDC Available, the industry leader,
More informationSuper High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
More informationFT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed (Washable: Refer to 68) Suitable for automatic insertion and automatic adjust
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE. 4 1.2 Description. 4 2.0 APPLICABLE DOCUMENTS
More informationDATASHEET HI-390. Features. Ordering Information. Pinout Switch States shown for a Logic 1 Input. Applications. Functional Diagram
HI-39 Dual SPDT CMOS nalog Switch NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLCEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DTSHEET FN7 Rev 1. ugust The Hl-39
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationType Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100
Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action
More informationProduct Series Specification Document
Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed
More informationCOPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1BVW S/08
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1BVW S/08 Introduction The HAH1BVW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications
More informationTYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-T...
Magnetic and Hydraulic-Magnetic Circuit Breaker 830-T... Description ngle, two and three pole magnetic and hydraulic-magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationThe Ordering Code for various standard model Recorders with an AC supply and without any additional options are as follows:
The basic PC software is supplied free with the recorder. There is an additional charge for the extensive Data Acquisition Software supplied with communication of RS-232/422/485 or Ethernet. The Ordering
More informationTX14/15 SERIES CONNECTORS
The leaf-type design (non-pin) contact of this board-to-board connector is superior in reliability and stability due to its resistance to twisting. The receptacle (TX1) and plug (TX15) combination can
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationMetallized PPS Capacitors for extreme capacitance stability. 1 min / 23 C B
Replaces CKM 501 B series Applications & Characteristics Railway signalling High-temperature (125 C) High capacitance stability Harmonized circuits Filtering High-reliability circuits Security applications
More informationS-7000 ROTARY CODED SWITCHES (SMD) S E T A FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
S- RoHS compliant INTERNL STRUCTURE Part name Material lammability ETURES Cover Stainless steel (SUS ) O ring Rotor Spacer Moving contact ixed contact Silicone rubber Polyphenylenesulphide Stainless steel
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationSINGLE TURN CERMET TRIMMERS
SINGLE TURN INTERNAL STRUCTURE 4 5!0 9 8 6 FEATURES Lead-free soldering, Cadmium-free Various configurations to choose from Wide variety (4 types) O ring sealed and washable 4 5 6 8 9!0 Part name Housing
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationTYPE. 250 ppm / 200 ppm /
FEATURES High power in small packages Available wide range to automatic insertion machine. APPLICATIONS All general purpose power applications. DESCRIPTION A homogeneous film of metal alloy is deposited
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationVishay Dale Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount FEATURES RESISTANCE RANGE 18546
RH, NH FETURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 vailable in non-inductive styles (type NH) with ryton- Perry
More informationAMERICAN CAPACITOR CORPORATION METALLIZED POLYPROPYLENE CAPACITORS ENVIRONMENTAL DATA
AMERICAN CAPACITOR CORPORATION ENVIRONMENTAL DATA SERIES N ENGINEERING DATA SHEET APPLICATIONS The N series Metallized Polypropylene capacitors are ideally suited for applications requiring low Dissipation
More informationED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationMOLEX TAIWAN LTD ( GC ) TITLE : SINGLE PORT UP-RIGHT TYPE USB CONNECTOR
SINGLE PORT UP-RIGHT TYPE USB CONNECTOR 971205 1 of 8 1.0 SCOPE This specification covers the USB series product. 2.0 APPLICABLE DOCUMENTS The following documents form a part of this specification to the
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationK04 TYPE -40 C +85 C 20000H
K04 TYPE -40 C +85 C 20000H Extended life. Surge-proof capacitor in aluminium can with insulation sleeve. To be mounted with ring clips or with threaded stud. Designed for high resistances to voltage spikes.
More informationQxx15xx & Qxx16xHx Series
Teccor brand Thyristors Description 15 mp and 16 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationSeries CCT-58S Multi-Throw DC 18 GHz, SP7T & SP8T Normally Open Coaxial Switch
PART NUMBER CCT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-18 GHz The CCT-58S/CT-58S is an internally terminated, broadband, multi-throw, electromechanical coaxial switch designed to switch
More informationHydraulic Pressure NAH Applications. Features. New generation available - refer to
NAH 8 Hydraulic Pressure Transmitter New generation available - refer to www.trafag.com/h70 Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for
More informationFEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationSURFACE MOUNT MONOLITHIC CHIP CAPACITORS COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series
COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series FEATURES Miniature size No Polarity Nickel Barrier Termination Standard highly resistant to metal migration Uniform dimensions
More informationTYPE. 250 ppm / 200 ppm / rated dissipation at T amb = ppm / 200 ppm / 250 ppm / 200 ppm /
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic
More informationM2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½ Introduction The Klixon M2 thermostat is constructed with a snap acting bimetal disc that serves as the actuating element.
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationR.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/
Loose Taped X CLASS (IEC 60384-4) - MKP Series Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationFeatures Switching. Zero cross. Applications Resistive and inductive loads with cos<>0.85. Your A ddress Li ne 4
Solid State Relays Datasheet 922534 ENGLISH Features Switching Output Input Zero cross Back-to-back SCR with internal snubber AC (Input Resistance of 3KO) Applications Resistive and inductive loads with
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More information5SJ4...-.HG Circuit Breakers to IEC and UL 489
Siemens AG 009 5SJ...-.HG Circuit Breakers to IEC and UL 89 BETA Low-Voltage Circuit Protection Compliance with industry standards is a must in today's manufacturing environment. Worldwide acceptance is
More informationISA-PLAN // Precision resistors. SMS // Size Features
Features 5 W power rating at 70 C Constant current up to 25 A (5 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant
More informationST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive
More informationPRODUCT SPECIFICATION
1 of 10 H 1.0 GENERAL THIS SPECIFICATION COVERS.039 INCHES VERTICAL DDR II SOCKETS WITH BLANKED / FORMED CONTACT DESIGNED FOR PRINTED WIRING BOARD TO DUAL IN-LINE MEMORY MODULE INTERCONNECTION. IN ALL
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationPRELIMINARY PRODUCT SPECIFICATION. Part Number Product Description Doc Number
Page 1 PRELIMINARY Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the USB Type C Receptacle range. USB4050, USB4055, USB4060, USB4065. 2.0 PRODUCT NAME AND
More informationMetal-Case Tubular Metalized PPS Film Capacitors
Metalized Polyphenylene Sulfide Metal-Case Tubular Metalized PPS Film Capacitors Type 820P EECTRICA SPECIFICATIONS Capacitance Range: 0.01 μf to 15.0 μf C Voltage Range: 50 VC to 400 VC AC Voltage Range:
More informationPower Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
More informationProduct Specification
Product Specification NUMBER TDD2 HYBRID CAPACITOR ISSUE 01 REVISION E ECC-13-029 DATE 10-1-13 1.0 Scope This document contains specific electrical, mechanical, and environmental requirements and specifications
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationSPECIFICATIONS. Tolerances. L / [+1.0 / -0.5mm] ±1% / ±5% [15.2] ±1% / ±5% [20.3] Ordering Information
MSR Series Bare Metal Element Resistors Resistances from.5 to.1ohms Tolerance to ±1% Resistance Wire TCR: ± 2ppm/K For Current Sensing and Shunt Applications All Welded Construction Low Inductance (
More informationDDR4 SODIMM Socket 0.5mm Pitch 260Pos
1. Introduction 1.1 Testing was performed on DDR4 SODIMM SOCKET 260P to determine if it meets the requirement of Product Specification, 108-115122 Rev.A. 1.2 Scope This report covers the electrical, mechanical
More informationMetallized Polypropylene Film Capacitor Related Document: IEC
MKP 184 Metallized Polypropylene Film Capacitor Related Document: IEC 6084-16 MAIN APPLICATIONS: High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back
More informationRESOLVER (D/R) CONVERTERS
HIGH POWER 1-BIT digital-to- RESOLVER (D/R) CONVERTERS FEATURES Make sure the next Card you purchase has... VA Drive Capacity 8-Bit/-Byte Double Buffered Transparent Latch Resolution: 1 Bits Accuracy:
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction (Washable) INTERNL
More informationPRODUCT SPECIFICATION FOR Micro SIM +Nano SIM/Micro SD (T/F)Card Connector SERIES
Page 1 of 5 1.0 SCOPE This Specification covers Micro SIM +Nano SIM/Micro SD Card Connector SERIES 2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings and other sections of this specification
More informationSeries CCR-39S Multi-Throw DC-12 GHz, SP7T & SP8T Latching Coaxial Switch
PART NUMBER CCR-39S DESCRIPTION Commercial Latching Multi-throw, DC-12GHz The CCR-39S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave signal from a common input
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink FEATURES 1 % tolerance available High power rating = 200 W Wide ohmic value range = 0.046 Ωto 1 MΩ Non inductive Easy mounting Low thermal radiation of the case
More informationSERIAL ATA POWER CONNECTOR 1.27 mm PITCH
: 1.27 mm PITCH TBLE OF CONTENTS 1.0 SCOPE 2.0 PPLICBLE DOCUMENTS 3.0 MTERIL SPECIFICTIONS 3.1 DESIGN ND CONSTRUCTION 3.2 MTERILS 4.0 PERFORMNCE ND TEST 5.0 TEST REQUIREMENTS ND PROCEDURES SHT 1 2 3 4
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationDigital display Pressure range ON/OFF output Linear output Model No Positive pressure 0 to 98 kpa (0 to 1 kgf/cm 2 ) NPN open collector o 1 to o5
Pressure Sensor E8CC with Built-in Microcomputer and Digital Display and New E8CB General-purpose Model Withstands a of 490 kpa (5 kgf/cm 2 ) and highly reliable. Incorporates a two-turn adjuster ensuring
More informationPTF Series Long Life Slide Potentiometer
*RoHS COMPLIANT Features Long life carbon element Assortment of resistance tapers 45 mm, 60 mm and 00 mm travel lengths Single and dual gang elements Long operational life Tracking error within ± db PTF
More information3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More information7000 SERIES THUMBWHEEL SWITCHES
7000 SERIES THUMBWHEEL SWITCHES The combines heavy-duty construction and a compact package size. Designed to meet demanding military performance specifications, the switch features a unique one-piece housing
More informationat f C 20 mf 20 mf < C T 50 mf C > 50 mf 1 khz 3 x x x 10-4 Mounting Recommendation
GTO MKP Capacitors for Pulse Applications with Internal Series Connection Special Features Pulse duty construction Self-healing Cylindrical capacitor body with axial screw and thread connections size M6
More informationImpedance relay and protection assemblies
RXZK 21H, 22H, 23H 509 006-BEN Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice (SE970175) (SE970184) Features Micro-processor based impedance relay with R and X settings
More informationSeries CCR-39S Multi-Throw DC-12 GHz, SP9T & SP10T Latching Coaxial Switch
PART NUMBER CCR-39S DESCRIPTION Commercial Latching Multi-throw, DC-12GHz The CCR-39Sis a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave signal from a common input
More informationWIESON TECHNOLOGIES CO., LTD.
TABLE OF CONTENT 1. Scope.... 2 2. Reference Documents. 2 3. Material and Components.... 2 4. Design and Construction.... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements and
More information1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental
TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter
More informationATC 700 B Series NPO Porcelain and Ceramic Multilayer Capacitors
ATC 700 Series NPO Porcelain and Ceramic Multilayer Capacitors Case Size Capacitance Range (.1" x.1") 0.1 pf to 5 pf Low ESR/ESL Zero TCC Low Noise High Self-Resonance Rugged Construction Established Reliability
More information3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA
Page of 8 3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA Product Specification 78-50-0-7 Revised 08-09- Page of 8 Table of Contents Title
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationSD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
More information